X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2FM5208EVBE.h;h=04b39cb3d39889caa9366514249390c5cb941e6b;hb=06ddcfc95a0eb1cf17c1436bfeb3cc4d056fdb3a;hp=c9d20102f1ad5bd2cb829239edbf2c2d8e569764;hpb=55dabcc8f24598e2777f663de09ab55fbe1269da;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h
index c9d2010..04b39cb 100644
--- a/include/configs/M5208EVBE.h
+++ b/include/configs/M5208EVBE.h
@@ -13,40 +13,20 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
 
-#undef CONFIG_WATCHDOG
 #define CONFIG_WATCHDOG_TIMEOUT		5000
 
 #ifdef CONFIG_MCFFEC
-#	define CONFIG_MII_INIT		1
 #	define CONFIG_SYS_DISCOVER_PHY
-#	define CONFIG_SYS_RX_ETH_BUFFER	8
-#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#	define CONFIG_HAS_ETH1
 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
 #	ifndef CONFIG_SYS_DISCOVER_PHY
 #		define FECDUPLEX	FULL
 #		define FECSPEED		_100BASET
-#	else
-#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#		endif
 #	endif			/* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
-/* Timer */
-#define CONFIG_MCFTMR
-
 /* I2C */
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	80000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
-#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
-
-#define CONFIG_UDP_CHECKSUM
 
 #ifdef CONFIG_MCFFEC
 #	define CONFIG_IPADDR	192.162.1.2
@@ -70,8 +50,6 @@
 
 #define CONFIG_PRAM		512	/* 512 KB */
 
-#define CONFIG_SYS_LOAD_ADDR	0x40010000
-
 #define CONFIG_SYS_CLK		166666666	/* CPU Core Clock */
 #define CONFIG_SYS_PLL_ODR	0x36
 #define CONFIG_SYS_PLL_FDR	0x7D
@@ -87,8 +65,7 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
 #define CONFIG_SYS_INIT_RAM_SIZE		0x4000	/* Size of used area in internal SRAM */
 #define CONFIG_SYS_INIT_RAM_CTRL	0x221
-#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_INIT_SP_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
 
 /*
  * Start addresses for the final memory configuration
@@ -103,12 +80,8 @@
 #define CONFIG_SYS_SDRAM_EMOD		0x80010000
 #define CONFIG_SYS_SDRAM_MODE		0x00CD0000
 
-#define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_FLASH_BASE + 0x400)
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 
-#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
@@ -120,8 +93,6 @@
 /* FLASH organization */
 #ifdef CONFIG_SYS_FLASH_CFI
 #	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
-#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #	define CONFIG_SYS_MAX_FLASH_SECT	254	/* max number of sectors on one chip */
 #endif
 
@@ -137,7 +108,6 @@
 	env/embedded.o(.text*);
 
 /* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE	16
 
 #define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
 					 CONFIG_SYS_INIT_RAM_SIZE - 8)