X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2FEB%2BMCF-EV123.h;h=a0b27a89c42cbeb1343aa63476f887d217937d58;hb=206c00f26f56af02686cb69bfe5c75e979063171;hp=720b335b099158ce83733ab331c4ee63c53a442b;hpb=ad09083c3736ea72bceee92721933513d3137b66;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index 720b335..a0b27a8 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -1,7 +1,7 @@ /* * Configuation settings for the BuS EB+MCF-EV123 boards. * - * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG + * (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG * * See file CREDITS for list of people who contributed to this * project. @@ -25,199 +25,255 @@ #ifndef _CONFIG_EB_MCF_EV123_H_ #define _CONFIG_EB_MCF_EV123_H_ -#define CONFIG_EB_MCF_EV123 +#undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP -#undef DEBUG -#undef CFG_HALT_BEFOR_RAM_JUMP -#undef ET_DEBUG - -/* - * High Level Configuration Options (easy to change) - */ +/*----------------------------------------------------------------------* + * High Level Configuration Options (easy to change) * + *----------------------------------------------------------------------*/ #define CONFIG_MCF52x2 /* define processor family */ #define CONFIG_M5282 /* define processor type */ +#define CONFIG_EB_MCF_EV123 #define CONFIG_MISC_INIT_R -#define FEC_ENET -#define CONFIG_ETHADDR 00:CF:52:82:EB:01 - +#define CONFIG_MCFUART +#define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 9600 -#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } -#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ +#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */ #define CONFIG_BOOTCOMMAND "printenv" -/* Configuration for environment - * Environment is embedded in u-boot in the second sector of the flash - */ +/*----------------------------------------------------------------------* + * Options * + *----------------------------------------------------------------------*/ + +#define CONFIG_BOOT_RETRY_TIME -1 +#define CONFIG_RESET_TO_RETRY +#define CONFIG_SPLASH_SCREEN + +/*----------------------------------------------------------------------* + * Configuration for environment * + * Environment is in the second sector of the first 256k of flash * + *----------------------------------------------------------------------*/ + #ifndef CONFIG_MONITOR_IS_IN_RAM -#define CFG_ENV_ADDR 0xF003C000 /* End of 256K */ -#define CFG_ENV_SECT_SIZE 0x4000 -#define CFG_ENV_IS_IN_FLASH 1 -/* -#define CFG_ENV_IS_EMBEDDED 1 -#define CFG_ENV_ADDR_REDUND 0xF0018000 -#define CFG_ENV_SECT_SIZE_REDUND 0x4000 -*/ +#define CONFIG_ENV_ADDR 0xF003C000 /* End of 256K */ +#define CONFIG_ENV_SECT_SIZE 0x4000 +#define CONFIG_ENV_IS_IN_FLASH 1 #else -#define CFG_ENV_ADDR 0xFFE04000 -#define CFG_ENV_SECT_SIZE 0x2000 -#define CFG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR 0xFFE04000 +#define CONFIG_ENV_SECT_SIZE 0x2000 +#define CONFIG_ENV_IS_IN_FLASH 1 #endif -/*#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) ) */ -#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADB)) +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include + +#undef CONFIG_CMD_LOADB +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +#define CONFIG_MCFTMR -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include #define CONFIG_BOOTDELAY 5 -#define CFG_PROMPT "\nEV123 U-Boot> " -#define CFG_LONGHELP /* undef to save memory */ +#define CONFIG_HUSH_PARSER +#define CONFIG_SYS_PROMPT "\nEV123 U-Boot> " +#define CONFIG_SYS_LONGHELP 1 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CFG_LOAD_ADDR 0x20000 +#define CONFIG_SYS_LOAD_ADDR 0x20000 -#define CFG_MEMTEST_START 0x100000 -#define CFG_MEMTEST_END 0x400000 -/*#define CFG_DRAM_TEST 1 */ -#undef CFG_DRAM_TEST +#define CONFIG_SYS_MEMTEST_START 0x100000 +#define CONFIG_SYS_MEMTEST_END 0x400000 +/*#define CONFIG_SYS_DRAM_TEST 1 */ +#undef CONFIG_SYS_DRAM_TEST -/* Clock and PLL Configuration */ -#define CFG_HZ 10000000 -#define CFG_CLK 58982400 /* 9,8304MHz * 6 */ +/*----------------------------------------------------------------------* + * Clock and PLL Configuration * + *----------------------------------------------------------------------*/ +#define CONFIG_SYS_HZ 10000000 +#define CONFIG_SYS_CLK 58982400 /* 9,8304MHz * 6 */ /* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */ -#define CFG_MFD 0x01 /* PLL Multiplication Factor Devider */ -#define CFG_RFD 0x00 /* PLL Reduce Frecuency Devider */ +#define CONFIG_SYS_MFD 0x01 /* PLL Multiplication Factor Devider */ +#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */ -/* +/*----------------------------------------------------------------------* + * Network * + *----------------------------------------------------------------------*/ + +#define CONFIG_MCFFEC +#define CONFIG_NET_MULTI 1 +#define CONFIG_MII 1 +#define CONFIG_MII_INIT 1 +#define CONFIG_SYS_DISCOVER_PHY +#define CONFIG_SYS_RX_ETH_BUFFER 8 +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN + +#define CONFIG_SYS_FEC0_PINMUX 0 +#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE +#define MCFFEC_TOUT_LOOP 50000 + +#define CONFIG_ETHADDR 00:CF:52:82:EB:01 +#define CONFIG_OVERWRITE_ETHADDR_ONCE + +/*------------------------------------------------------------------------- * Low Level Configuration Settings * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. - */ -#define CFG_MBAR 0x40000000 + *-----------------------------------------------------------------------*/ -#define CFG_DISCOVER_PHY -/* #define CFG_ENET_BD_BASE 0x380000 */ +#define CONFIG_SYS_MBAR 0x40000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CFG_INIT_RAM_ADDR 0x20000000 -#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ -#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + *-----------------------------------------------------------------------*/ + +#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 +#define CONFIG_SYS_INIT_RAM_END 0x10000 +#define CONFIG_SYS_GBL_DATA_SIZE 64 +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE1 0x00000000 -#define CFG_SDRAM_SIZE1 16 /* SDRAM size in MB */ - -/* -#define CFG_SDRAM_BASE0 CFG_SDRAM_BASE1+CFG_SDRAM_SIZE1*1024*1024 -#define CFG_SDRAM_SIZE0 16 */ /* SDRAM size in MB */ +#define CONFIG_SYS_SDRAM_BASE1 0x00000000 +#define CONFIG_SYS_SDRAM_SIZE1 16 /* SDRAM size in MB */ -#define CFG_SDRAM_BASE CFG_SDRAM_BASE1 -#define CFG_SDRAM_SIZE CFG_SDRAM_SIZE1 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE1 +#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE1 -#define CFG_FLASH_BASE 0xFFE00000 -#define CFG_INT_FLASH_BASE 0xF0000000 /* If M5282 port is fully implemented the monitor base will be behind * the vector table. */ -#if (TEXT_BASE != CFG_INT_FLASH_BASE) -#define CFG_MONITOR_BASE (TEXT_BASE + 0x400) +#if (TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE) +#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400) #else -#define CFG_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */ +#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */ #endif -#define CFG_MONITOR_LEN 0x20000 -#define CFG_MALLOC_LEN (256 << 10) -#define CFG_BOOTPARAMS_LEN 64*1024 +#define CONFIG_SYS_MONITOR_LEN 0x20000 +#define CONFIG_SYS_MALLOC_LEN (256 << 10) +#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_SECT 35 -#define CFG_MAX_FLASH_BANKS 2 -#define CFG_FLASH_ERASE_TOUT 10000000 -#define CFG_FLASH_PROTECTION + +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE +#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000 +#define CONFIG_SYS_INT_FLASH_ENABLE 0x21 + +#define CONFIG_SYS_MAX_FLASH_SECT 35 +#define CONFIG_SYS_MAX_FLASH_BANKS 2 +#define CONFIG_SYS_FLASH_ERASE_TOUT 10000000 +#define CONFIG_SYS_FLASH_PROTECTION /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 16 +#define CONFIG_SYS_CACHELINE_SIZE 16 /*----------------------------------------------------------------------- * Memory bank definitions */ -#define CFG_CS0_BASE CFG_FLASH_BASE -#define CFG_CS0_SIZE 2*1024*1024 -#define CFG_CS0_WIDTH 16 -#define CFG_CS0_RO 0 -#define CFG_CS0_WS 6 +#define CONFIG_SYS_CS0_BASE 0xFFE00000 +#define CONFIG_SYS_CS0_CTRL 0x00001980 +#define CONFIG_SYS_CS0_MASK 0x001F0001 -#define CFG_CS3_BASE 0xE0000000 -#define CFG_CS3_SIZE 1*1024*1024 -#define CFG_CS3_WIDTH 16 -#define CFG_CS3_RO 0 -#define CFG_CS3_WS 6 +#define CONFIG_SYS_CS3_BASE 0xE0000000 +#define CONFIG_SYS_CS0_CTRL 0x00001980 +#define CONFIG_SYS_CS3_MASK 0x000F0001 /*----------------------------------------------------------------------- * Port configuration */ -#define CFG_PACNT 0x0000000 /* Port A D[31:24] */ -#define CFG_PADDR 0x0000000 -#define CFG_PADAT 0x0000000 +#define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */ +#define CONFIG_SYS_PADDR 0x0000000 +#define CONFIG_SYS_PADAT 0x0000000 -#define CFG_PBCNT 0x0000000 /* Port B D[23:16] */ -#define CFG_PBDDR 0x0000000 -#define CFG_PBDAT 0x0000000 +#define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */ +#define CONFIG_SYS_PBDDR 0x0000000 +#define CONFIG_SYS_PBDAT 0x0000000 -#define CFG_PCCNT 0x0000000 /* Port C D[15:08] */ -#define CFG_PCDDR 0x0000000 -#define CFG_PCDAT 0x0000000 +#define CONFIG_SYS_PCCNT 0x0000000 /* Port C D[15:08] */ +#define CONFIG_SYS_PCDDR 0x0000000 +#define CONFIG_SYS_PCDAT 0x0000000 -#define CFG_PDCNT 0x0000000 /* Port D D[07:00] */ -#define CFG_PCDDR 0x0000000 -#define CFG_PCDAT 0x0000000 +#define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */ +#define CONFIG_SYS_PCDDR 0x0000000 +#define CONFIG_SYS_PCDAT 0x0000000 -#define CFG_PEHLPAR 0xC0 -#define CFG_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */ -#define CFG_DDRUA 0x05 -#define CFG_PJPAR 0xFF; +#define CONFIG_SYS_PEHLPAR 0xC0 +#define CONFIG_SYS_PUAPAR 0x0F +#define CONFIG_SYS_DDRUA 0x05 +#define CONFIG_SYS_PJPAR 0xFF /*----------------------------------------------------------------------- - * CCM configuration + * VIDEO configuration */ -#define CFG_CCM_SIZ 0 +#define CONFIG_VIDEO -/*---------------------------------------------------------------------*/ +#ifdef CONFIG_VIDEO +#define CONFIG_VIDEO_VCXK 1 + +#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 2 +#define CONFIG_SYS_VCXK_DOUBLEBUFFERED 1 +#define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS3_BASE +#define CONFIG_SYS_VCXK_AUTODETECT 1 + +#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT +#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR +#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN 0x0001 + +#define CONFIG_SYS_VCXK_ENABLE_PORT MCFGPTB_GPTPORT +#define CONFIG_SYS_VCXK_ENABLE_DDR MCFGPTB_GPTDDR +#define CONFIG_SYS_VCXK_ENABLE_PIN 0x0002 + +#define CONFIG_SYS_VCXK_REQUEST_PORT MCFGPTB_GPTPORT +#define CONFIG_SYS_VCXK_REQUEST_DDR MCFGPTB_GPTDDR +#define CONFIG_SYS_VCXK_REQUEST_PIN 0x0004 + +#define CONFIG_SYS_VCXK_INVERT_PORT MCFGPIO_PORTE +#define CONFIG_SYS_VCXK_INVERT_DDR MCFGPIO_DDRE +#define CONFIG_SYS_VCXK_INVERT_PIN MCFGPIO_PORT2 + +#endif /* CONFIG_VIDEO */ #endif /* _CONFIG_M5282EVB_H */ /*---------------------------------------------------------------------*/