X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2FASH405.h;h=6d40748d0e63d1f71ff77aa065e2a33353d7e32c;hb=880540decfb855e96bc14ac84ac7784669e4b382;hp=789f7501fdf20dd6d44a2396c2f844984fb06cdb;hpb=550650ddd0fde00f245bc3da72d7272844198394;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 789f750..6d40748 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -37,6 +37,8 @@
 #define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
 #define CONFIG_ASH405		1	/* ...on a ASH405 board		*/
 
+#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
+
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
 #define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/
 
@@ -53,7 +55,6 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
-#define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
 
 #define CONFIG_PPC4xx_EMAC
@@ -104,9 +105,6 @@
 #define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 
 #undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#endif
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
@@ -174,6 +172,7 @@
 #define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/
 
 #define CONFIG_PCI			/* include pci support		*/
+#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_PCI_HOST PCI_HOST_HOST	/* select pci host function	*/
 #undef	CONFIG_PCI_PNP			/* do pci plug-and-play		*/
 					/* resource configuration	*/
@@ -248,10 +247,11 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC16) for environment
  */
-#define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
@@ -322,10 +322,9 @@
 #define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
 #define CONFIG_SYS_OCM_DATA_SIZE	0x1000
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
+#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM	*/
 
-#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -351,14 +350,6 @@
 #define CONFIG_SYS_DUART_RST		(0x80000000 >> 14)
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-/*
  * Default speed selection (cpu_plb_opb_ebc) in mhz.
  * This value will be set if iic boot eprom is disabled.
  */