X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;ds=sidebyside;f=configs%2FP1010RDB-PA_NAND_defconfig;h=49acfd2d38e5b445bb3816686b252ed6903c01db;hb=3dc2987f5c9b79e19ea6b0e69e01a817310abaac;hp=9e95e1b44767520fa56276193842c284f625edfc;hpb=b9c9ce8a4064c8d88f714604db856cf1cd2b40b5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/configs/P1010RDB-PA_NAND_defconfig b/configs/P1010RDB-PA_NAND_defconfig
index 9e95e1b..49acfd2 100644
--- a/configs/P1010RDB-PA_NAND_defconfig
+++ b/configs/P1010RDB-PA_NAND_defconfig
@@ -1,23 +1,29 @@
 CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
+CONFIG_SYS_TEXT_BASE=0x11000000
 CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_ENV_SIZE=0x4000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
 CONFIG_SPL_TEXT_BASE=0xFF800000
 CONFIG_SPL_SERIAL=y
+CONFIG_TPL_TEXT_BASE=0xD0000000
 CONFIG_TPL_LIBCOMMON_SUPPORT=y
 CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_TPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL=y
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB_PA=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+CONFIG_ENABLE_36BIT_PHYS=y
+CONFIG_SYS_MPC85XX_NO_RESETVEC=y
+CONFIG_TPL_SYS_MPC85XX_NO_RESETVEC=y
+CONFIG_PCIE1=y
+CONFIG_PCIE2=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_TPL_SYS_MONITOR_BASE=0xD0000000
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"
@@ -25,16 +31,30 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 # CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_MAX_SIZE=0x2000
 CONFIG_SPL_NAND_BOOT=y
+CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE=y
+CONFIG_SPL_INIT_MINIMAL=y
+CONFIG_SPL_FLUSH_IMAGE=y
+CONFIG_SPL_RELOC_TEXT_BASE=0xd003d000
+CONFIG_SPL_RELOC_STACK=0xd003fff0
+CONFIG_TPL_GD_ADDR=0xd002c000
+CONFIG_TPL_RELOC_TEXT_BASE=0xd0000000
+CONFIG_TPL_RELOC_STACK=0xd0030000
+CONFIG_TPL_RELOC_MALLOC=y
+CONFIG_TPL_RELOC_MALLOC_ADDR=0xd0034000
+CONFIG_TPL_RELOC_MALLOC_SIZE=0xc000
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_TARGET="u-boot-with-spl.bin"
 CONFIG_TPL=y
+CONFIG_TPL_MAX_SIZE=0x20000
 CONFIG_TPL_DRIVERS_MISC=y
 CONFIG_TPL_ENV_SUPPORT=y
 CONFIG_TPL_I2C=y
 CONFIG_TPL_MPC8XXX_INIT_DDR=y
 CONFIG_TPL_NAND_SUPPORT=y
-CONFIG_TPL_SERIAL=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
@@ -50,10 +70,21 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel
 CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0xc000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_USE_BOOTFILE=y
+CONFIG_BOOTFILE="uImage"
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="eTSEC1"
 CONFIG_DM=y
+CONFIG_FSL_SATA_V2=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
+CONFIG_SYS_SPD_BUS_NUM=1
+CONFIG_CHIP_SELECTS_PER_CTRL=1
+CONFIG_SYS_DDR_RAW_TIMING=y
+CONFIG_TPL_COMMON_INIT_DDR=y
 CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_TPL_SYS_I2C_LEGACY=y
@@ -70,6 +101,8 @@ CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_FSL_IFC=y
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_SPI_FLASH_SPANSION=y
@@ -95,3 +128,4 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_FSL=y