##
+## Path where the configuration files are kept.
+##
+## Valid values: A directory
+## Default value: /etc/zypp
+##
+# configdir = /etc/zypp
+
+##
## Path where the known repositories .repo files are kept
##
## Valid values: A directory
-## Default value: /etc/zypp/repos.d
+## Default value: {configdir}/repos.d
##
## Changing this invalidates all known repositories
##
# reposdir = /etc/zypp/repos.d
+##
+## Path where the known services .service files are kept
+##
+## Valid values: A directory
+## Default value: {configdir}/services.d
+##
+## Changing this invalidates all known services
+##
+# servicesdir = /etc/zypp/services.d
+
##
## Whether repository urls should be probed when added
## minutes. If an automatic request for refresh comes before <repo.refresh.delay>
## minutes passed since the last check, the request is ignored.
##
-## A value of 0 means the repository will always be checked. To get the oposite
+## A value of 0 means the repository will always be checked. To get the opposite
## effect, disable autorefresh for your repositories.
##
## This option has no effect for repositories with autorefresh disabled, nor for
##
# repo.refresh.delay = 10
+##
+## Translated package descriptions to download from repos.
+##
+## A list of locales for which translated package descriptions should
+## be downloaded, in case they are availavble and the repo supports this.
+## Not all repo formats support downloading specific translations only.
+##
+## Valid values: List of locales like 'en', 'en_US'...
+## Default value: RequestedLocales
+##
+## If data for a specific locale are not available, we try to find some
+## fallback. Translations for 'en' are always downloaded.
+##
+# repo.refresh.locales = en, de
##
-## Whether to consider using a .patch.rpm when downloading a package
+## Maximum number of concurrent connections to use per transfer
##
-## Valid values: boolean
-## Default value: true
+## Valid values: Integer
+## Default value: 5
+##
+## This setting is only used if more than one is possible
+## Setting it to a reasonable number avoids flooding servers
+##
+# download.max_concurrent_connections = 5
+
+##
+## Sets the minimum download speed (bytes per second)
+## until the connection is dropped
+## This can be useful to prevent security attacks on hosts by
+## providing updates at very low speeds.
##
-## Using a patch rpm will decrease the download size for package updates
-## since it does not contain all files of the package but only the changed
-## ones. The .patch.rpm is ready to be installed immediately after download.
-## There is no further processing needed, as it is for a .delta.rpm.
+## 0 means no limit
##
-# download.use_patchrpm = true
+# download.min_download_speed = 0
+## Maximum download speed (bytes per second)
+## 0 means no limit
+# download.max_download_speed = 0
+
+## Number of tries per download which will be
+## done without user interaction
+## 0 means no limit (use with caution)
+# download.max_silent_tries = 5
+
+##
+## Maximum time in seconds that you allow a transfer operation to take.
+##
+## This is useful for preventing your batch jobs from hanging for hours due
+## to slow networks or links going down. Limiting operations to less than a
+## few minutes risk aborting perfectly normal operations.
+##
+## Valid values: [0,3600]
+## Default value: 180
+##
+# download.transfer_timeout = 180
##
## Whether to consider using a .delta.rpm when downloading a package
##
# download.use_deltarpm = true
+##
+## Whether to consider using a deltarpm even when rpm is local
+##
+## Valid values: boolean
+## Default value: false
+##
+## This option has no effect unless download.use_deltarpm is set true.
+##
+# download.use_deltarpm.always = false
##
-## Defining directory for equivalent vendors
+## Hint which media to prefer when installing packages (download vs. CD).
+##
+## Valid values: download, volatile
+## Default value: download
+##
+## Note that this just a hint. First of all the solver will choose the 'best'
+## package according to its repos priority, version and architecture. But if
+## there is a choice, we will prefer packages from the desired media.
+##
+## Packages available locally are always preferred. The question is whether
+## you prefer packages being downloaded via FTP/HTTP/HTTPS (download), rather
+## than being prompted to insert a CD/DVD (volatile), in case they are available
+## on both media.
+##
+## Name | Priority | URI
+## openSUSE-11.1 99 dvd:///
+## openSUSE-11.1-Oss 99 http://download.opensuse.org/distribution/11.1/repo/oss
+##
+## In the above example 2 repositories with similar content are used. Rather
+## than raising the priority of one of them to 'prefer' a certain media, you
+## should use the same priority for both and set download.media_preference
+## instead.
+##
+## download.media_preference = download
+
+##
+## Path where media are preferably mounted or downloaded
+##
+## Valid values: A (writable) directory
+## Default value: /var/adm/mount
+##
+## The media backend will try to organize media mount points and download areas
+## below this directory, unless a different location is requested by the application.
+##
+## If the directory is not accessible and read/writable for a specific user,
+## the fallback is to use /var/tmp.
+##
+## download.media_mountdir = /var/adm/mount
+
+##
+## Signature checking (repodata and rpm packages)
+##
+## boolean gpgcheck (default: on)
+## boolean repo_gpgcheck (default: unset -> according to gpgcheck)
+## boolean pkg_gpgcheck (default: unset -> according to gpgcheck)
+##
+## If 'gpgcheck' is 'on' we will either check the signature of repo metadata
+## (packages are secured via checksum in the metadata), or the signature of
+## an rpm package to install if it's repo metadata are not signed or not
+## checked.
+##
+## The default behavior can be altered by explicitly setting 'repo_gpgcheck' and/or
+## 'pkg_gpgcheck' to perform those checks always (if 'on') or never (if 'off').
+##
+## Explicitly setting 'gpgcheck', 'repo_gpgcheck' 'pkg_gpgcheck' in a
+## repositories .repo file will overwrite the defaults here.
+##
+## DISABLING GPG CHECKS IS NOT RECOMMENDED.
+## Signing data enables the recipient to verify that no modifications
+## occurred after the data were signed. Accepting data with no, wrong
+## or unknown signature can lead to a corrupted system and in extreme
+## cases even to a system compromise.
+##
+# repo_gpgcheck = unset -> according to gpgcheck
+# pkg_gpgcheck = unset -> according to gpgcheck
+
+##
+## Commit download policy to use as default.
+##
+## DownloadOnly, Just download all packages to the local cache.
+## Do not install. Implies a dry-run.
+##
+## DownloadInAdvance, First download all packages to the local cache.
+## Then start to install.
+##
+## DownloadInHeaps, Similar to DownloadInAdvance, but try to split
+## the transaction into heaps, where at the end of
+## each heap a consistent system state is reached.
+##
+## DownloadAsNeeded Alternating download and install. Packages are
+## cached just to avid CD/DVD hopping. This is the
+## traditional behaviour.
+##
+## <UNSET> If a value is not set, empty or unknown, we pick
+## some sane default.
+##
+## commit.downloadMode =
+
+##
+## Defining directory which contains vendor description files.
+##
+## One file in this directory reflects a group of equivalent vendors. e.G.:
+## (filename is "nvidia" but could be any other name):
+## ------------------------- file contains begin -----------------------
+## [main]
+##
+## vendors = nvidia,suse,opensuse
+##
+## ------------------------- file contains end -----------------------
+## Libzypp makes an string comparision (like strncmp, case-insensitive)
+## whereas the beginning of the strings are compared only.
+## e.G. vendor "opensuse11.0" is compatible to "openSuSE".
##
## Valid values: A directory
-## Default value: /etc/zypp/vendors.d
+## Default value: {configdir}/vendors.d
##
# vendordir = /etc/zypp/vendors.d
+
##
## Whether required packages are installed ONLY
## So recommended packages, language packages and packages which depend
# solver.onlyRequires = false
##
+## EXPERTS ONLY: Per default the solver will not replace packages of
+## different vendors, unless you explicitly ask to do so. Setting this
+## option to TRUE will disable this vendor check (unless the application
+## explicitly re-enables it). Packages will then be considered based on
+## repository priority and version only. This may easily damage your system.
+##
+## CHANGING THE DEFAULT IS NOT RECOMMENDED.
+##
+## Valid values: boolean
+## Default value: false
+##
+# solver.allowVendorChange = false
+
+##
+## EXPERTS ONLY: TUNE DISTRIBUTION UPGRADE (DUP)
+## Set whether to allow package version downgrades upon DUP.
+##
+## CHANGING THE DEFAULT IS NOT RECOMMENDED.
+##
+## Valid values: boolean
+## Default value: true
+##
+# solver.dupAllowDowngrade = true
+
+##
+## EXPERTS ONLY: TUNE DISTRIBUTION UPGRADE (DUP)
+## Set whether follow package renames upon DUP.
+##
+## CHANGING THE DEFAULT IS NOT RECOMMENDED.
+##
+## Valid values: boolean
+## Default value: true
+##
+# solver.dupAllowNameChange = true
+
+##
+## EXPERTS ONLY: TUNE DISTRIBUTION UPGRADE (DUP)
+## Set whether to allow changing the packages architecture upon DUP.
+##
+## CHANGING THE DEFAULT IS NOT RECOMMENDED.
+##
+## Valid values: boolean
+## Default value: true
+##
+# solver.dupAllowArchChange = true
+
+##
+## EXPERTS ONLY: TUNE DISTRIBUTION UPGRADE (DUP)
+## Set whether to allow changing the packages vendor upon DUP. If you
+## are following a continuous distribution like Tumbleweed or Factory
+## where you use 'zypper dup --no-allow-vendor-change' quite frequently,
+## you may indeed benefit from disabling the VendorChange. Packages from
+## OBS repos will then be kept rather than being overwritten by Tumbleweeds
+## version.
+##
+## CHANGING THE DEFAULT IS NOT RECOMMENDED.
+##
+## Valid values: boolean
+## Default value: true
+##
+# solver.dupAllowVendorChange = true
+
+##
+## EXPERTS ONLY: Cleanup when deleting packages. Whether the solver should
+## per default try to remove packages exclusively required by the ones he's
+## asked to delete.
+##
+## This option should be used on a case by case basis, enabled via
+## command line options or switches the applications offer. Changing
+## the global default on a system where unattended actions are performed,
+## may easily damage your system.
+##
+## CHANGING THE DEFAULT IS NOT RECOMMENDED.
+##
+## Valid values: boolean
+## Default value: false
+##
+# solver.cleandepsOnRemove = false
+
+##
+## This file contains requirements/conflicts which fulfill the
+## needs of a running system.
+## For example the system would be broken if not glibc or kernel is
+## installed.
+## So the user will be informed if these packages will be deleted.
+##
+## Format: Each line represents one dependency:
+## e.g.
+## requires:kernel
+## requires:glibc
+## Default value: {configdir}/systemCheck
+##
+# solver.checkSystemFile = /etc/zypp/systemCheck
+
+##
+## This directory can contain files that contain requirements/conflicts
+## which fulfill the needs of a running system (see checkSystemFile).
+##
+## Files are read in alphabetical order.
+##
+## Default value: {configdir}/systemCheck.d
+##
+# solver.checkSystemFileDir = /etc/zypp/systemCheck.d
+
+##
+## When committing a dist upgrade (e.g. 'zypper dup') a solver testcase
+## is written to /var/log/updateTestcase-<date>. It is needed in bugreports.
+## This option returns the number of testcases to keep on the system. Old
+## cases will be deleted, as new ones are created.
+##
+## Use 0 to write no testcase at all, or -1 to keep all testcases.
+##
+## Valid values: Integer
+## Default value: 2
+##
+# solver.upgradeTestcasesToKeep = 2
+
+##
+## Whether dist upgrade should remove a products dropped packages.
+##
+## A new product may suggest a list of old and no longer supported
+## packages (dropped packages). Performing a dist upgrade the solver
+## may try to delete them, even if they do not cause any dependency
+## problem.
+##
+## Turning this option off, the solver will not try to remove those
+## packages unless they actually do cause dependency trouble. You may
+## do the cleanup manually, or simply leave them installed as long
+## as you don't need the disk space.
+##
+## Valid values: Boolean
+## Default value: true
+##
+# solver.upgradeRemoveDroppedPackages = true
+
+##
+## Packages which can be installed in different versions at the same time.
+##
+## Packages are selected either by name, or by provides. In the later case
+## the string must start with "provides:" immediately followed by the capability.
+##
+## Example:
+## kernel - just packages whith name 'kernel'
+## provides:multiversion(kernel) - all packages providing 'multiversion(kernel)'
+## (kenel and kmp packages should do this)
+## Valid values:
+## Comma separated list of packages.
+##
+## Default value:
+## empty
+##
+multiversion = provides:multiversion(kernel)
+
+##
+## Defining directory which may contain additional multiversion definitions.
+##
+## If the directory exists, each file in this directory is scanned, expecting
+## one valid multiversion list entry per line. Empty lines and lines starting
+## with '#' are ignored.
+## ------------------------- [/etc/zypp/multiversion.d/example file begin] -----------------------
+## # An alternate way to enable kernel packages being
+## # installed in parallel:
+##
+## provides:multiversion(kernel)
+## ------------------------- [/etc/zypp/multiversion.d/example file end] -----------------------
+##
+## Valid values: A directory
+## Default value: {configdir}/multiversion.d
+##
+# multiversiondir = /etc/zypp/multiversion.d
+
+## Comma separated list of kernel packages to keep installed in parallel, if the
+## above multiversion variable is set. Packages can be specified as
+## 2.6.32.12-0.7 - Exact version to keep
+## latest - Keep kernel with the highest version number
+## latest-N - Keep kernel with the Nth highest version number
+## running - Keep the running kernel
+## oldest - Keep kernel with the lowest version number (the GA kernel)
+## oldest+N - Keep kernel with the Nth lowest version number
+##
+## Note: This entry is not evaluated by libzypp, but by the
+## purge-kernels service (via /sbin/purge-kernels).
+##
+## Default: Do not delete any kernels if multiversion = provides:multiversion(kernel) is set
+multiversion.kernels = latest,latest-1,running
+
+##
## Path to locks file. If not exist then is create.
## In this file is saved also UI locks.
##
## valid value: path to file or place where file can be created
-## default value: /etc/zypp/locks
+## default value: {configdir}/locks
##
# locksfile.path = /etc/zypp/locks
##
-## Whetever to apply locks in locks file after zypp start.
+## Whether to apply locks in locks file after zypp start.
##
## Valid values: boolean
## Default value: true
##
# locksfile.apply = true
+
+##
+## Where update items are stored
+## (example: scripts, messages)
+##
+## Valid values: path to directory
+## Default value: /var/adm
+##
+# update.datadir = /var/adm
+
+##
+## Where update messages are stored
+##
+## Valid values: path to directory
+## Default value: {update.datadir}/update-messages
+##
+# update.messagesdir = /var/adm/update-messages
+
+##
+## Where update scripts are stored
+##
+## Valid values: path to directory
+## Default value: {update.datadir}/update-scripts
+##
+# update.scriptsdir = /var/adm/update-scripts
+
+##
+## Command to be invoked to send update messages.
+##
+## Packages may leave an update message file in {update.messagesdir}.
+## At the end of each commit, zypp collects those messages and may send
+## a notification to the user.
+##
+## zypp will prepare the update messages according to the selected
+## content format and pipe the content to the command.
+##
+## Format:
+## single - For each update message invoke the command and send
+## the message.
+## none - For each update message invoke the command but don't
+## use a pipe to send any data. You probably want to pass
+## the message file on the commandline using %P (see
+## Substitutions).
+## digest - Single invocation of the command, sending the path
+## names of all update message. One per line.
+## bulk - Single invocation of the command, sending the
+## concatenated content of all update messages, separated
+## by Ctrl-L.
+##
+## Substitutions:
+## %p - package identification (name-version-release.arch)
+## %P - full path to the update message file
+##
+## Valid values: The value is specified as "format | command".
+## An empty value will turn off any notification.
+##
+## Examples: single | mail -s 'Update message from %p' root
+## none | my-send-script -f %P
+##
+## Default value: single | /usr/lib/zypp/notify-message -p %p
+##
+# update.messages.notify = single | /usr/lib/zypp/notify-message -p %p
+
+##
+## Options for package installation: excludedocs
+##
+## Don't install any files which are marked as documentation.
+##
+## Valid values: boolean
+## Default value: no
+##
+# rpm.install.excludedocs = no
+
+##
+## Location of history log file.
+##
+## The history log is described at
+## http://en.opensuse.org/Libzypp/Package_History
+##
+## Valid values: absolute path to a file
+## Default value: /var/log/zypp/history
+##
+# history.logfile = /var/log/zypp/history
+
+##
+## Global credentials directory path.
+##
+## If a URL contains ?credentials=<filename> parameter, the credentials will
+## be stored and looked for in a file named <filename> in this directory.
+##
+## Valid values: absolute path to a directory
+## Default value: /etc/zypp/credentials.d
+##
+# credentials.global.dir = /etc/zypp/credentials.d
+
+##
+## Global credentials catalog file path.
+##
+## This file contains a catalog of all known user credentials which were
+## not stored via the ?credentials=<filename> URL parameter, i.e. passed
+## in URL as username:password component, or entered by user in
+## an authentication dialog.
+##
+## Valid values: absolute path to a file
+## Default value: /etc/zypp/credentials.cat
+##
+# credentials.global.file = /etc/zypp/credentials.cat
projects / platform / upstream / libzypp.git / blobdiff