#include <stdio.h>
#include <limits.h>
+#if CONFIG_REALTIME_ONLY & CONFIG_ONTHEFLY_BITPACKING
+extern int vp8_update_coef_context(VP8_COMP *cpi);
+extern void vp8_update_coef_probs(VP8_COMP *cpi);
+#endif
+
extern void vp8cx_pick_filter_level_fast(YV12_BUFFER_CONFIG *sd, VP8_COMP *cpi);
extern void vp8cx_set_alt_lf_level(VP8_COMP *cpi, int filt_val);
extern void vp8cx_pick_filter_level(YV12_BUFFER_CONFIG *sd, VP8_COMP *cpi);
extern const int vp8cx_base_skip_false_prob[128];
// Tables relating active max Q to active min Q
-static const int kf_low_motion_minq[QINDEX_RANGE] =
+static const unsigned char kf_low_motion_minq[QINDEX_RANGE] =
{
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
11,11,12,12,13,13,13,13,14,14,15,15,15,15,16,16,
16,16,17,17,18,18,18,18,19,20,20,21,21,22,23,23
};
-static const int kf_high_motion_minq[QINDEX_RANGE] =
+static const unsigned char kf_high_motion_minq[QINDEX_RANGE] =
{
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
16,16,17,17,18,18,18,18,19,19,20,20,20,20,21,21,
21,21,22,22,23,23,24,25,25,26,26,27,28,28,29,30
};
-static const int gf_low_motion_minq[QINDEX_RANGE] =
+static const unsigned char gf_low_motion_minq[QINDEX_RANGE] =
{
0,0,0,0,1,1,1,1,1,1,1,1,2,2,2,2,
3,3,3,3,4,4,4,4,5,5,5,5,6,6,6,6,
35,35,36,36,37,37,38,38,39,39,40,40,41,41,42,42,
43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58
};
-static const int gf_mid_motion_minq[QINDEX_RANGE] =
+static const unsigned char gf_mid_motion_minq[QINDEX_RANGE] =
{
0,0,0,0,1,1,1,1,1,1,2,2,3,3,3,4,
4,4,5,5,5,6,6,6,7,7,7,8,8,8,9,9,
38,39,39,40,40,41,41,42,42,43,43,44,45,46,47,48,
49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64
};
-static const int gf_high_motion_minq[QINDEX_RANGE] =
+static const unsigned char gf_high_motion_minq[QINDEX_RANGE] =
{
0,0,0,0,1,1,1,1,1,2,2,2,3,3,3,4,
4,4,5,5,5,6,6,6,7,7,7,8,8,8,9,9,
41,41,42,42,43,44,45,46,47,48,49,50,51,52,53,54,
55,56,57,58,59,60,62,64,66,68,70,72,74,76,78,80
};
-static const int inter_minq[QINDEX_RANGE] =
+static const unsigned char inter_minq[QINDEX_RANGE] =
{
0,0,1,1,2,3,3,4,4,5,6,6,7,8,8,9,
9,10,11,11,12,13,13,14,15,15,16,17,17,18,19,20,
static void alloc_raw_frame_buffers(VP8_COMP *cpi)
{
+#if VP8_TEMPORAL_ALT_REF
int width = (cpi->oxcf.Width + 15) & ~15;
int height = (cpi->oxcf.Height + 15) & ~15;
+#endif
cpi->lookahead = vp8_lookahead_init(cpi->oxcf.Width, cpi->oxcf.Height,
cpi->oxcf.lag_in_frames);
vpx_internal_error(&cpi->common.error, VPX_CODEC_MEM_ERROR,
"Failed to allocate scaled source buffer");
-
- vpx_free(cpi->tok);
+ vpx_free(cpi->tok);
{
+#if CONFIG_REALTIME_ONLY & CONFIG_ONTHEFLY_BITPACKING
+ unsigned int tokens = 8 * 24 * 16; /* one MB for each thread */
+#else
unsigned int tokens = cm->mb_rows * cm->mb_cols * 24 * 16;
-
+#endif
CHECK_MEM_ERROR(cpi->tok, vpx_calloc(tokens, sizeof(*cpi->tok)));
}
if (!oxcf)
return;
+#if CONFIG_MULTITHREAD
+ /* wait for the last picture loopfilter thread done */
+ if (cpi->b_lpf_running)
+ {
+ sem_wait(&cpi->h_event_end_lpf);
+ cpi->b_lpf_running = 0;
+ }
+#endif
+
if (cm->version != oxcf->Version)
{
cm->version = oxcf->Version;
vp8_setup_version(cm);
}
+ last_w = cpi->oxcf.Width;
+ last_h = cpi->oxcf.Height;
+
cpi->oxcf = *oxcf;
switch (cpi->oxcf.Mode)
cm->refresh_last_frame = 1;
cm->refresh_entropy_probs = 1;
+#if (CONFIG_REALTIME_ONLY & CONFIG_ONTHEFLY_BITPACKING)
+ cpi->oxcf.token_partitions = 3;
+#endif
+
if (cpi->oxcf.token_partitions >= 0 && cpi->oxcf.token_partitions <= 3)
cm->multi_token_partition =
(TOKEN_PARTITION) cpi->oxcf.token_partitions;
cpi->target_bandwidth = cpi->oxcf.target_bandwidth;
- last_w = cm->Width;
- last_h = cm->Height;
-
cm->Width = cpi->oxcf.Width;
cm->Height = cpi->oxcf.Height;
- cm->horiz_scale = cpi->horiz_scale;
- cm->vert_scale = cpi->vert_scale;
+ /* TODO(jkoleszar): if an internal spatial resampling is active,
+ * and we downsize the input image, maybe we should clear the
+ * internal scale immediately rather than waiting for it to
+ * correct.
+ */
// VP8 sharpness level mapping 0-7 (vs 0-10 in general VPx dialogs)
if (cpi->oxcf.Sharpness > 7)
cm->Height = (vs - 1 + cpi->oxcf.Height * vr) / vs;
}
- if (last_w != cm->Width || last_h != cm->Height)
+ if (last_w != cpi->oxcf.Width || last_h != cpi->oxcf.Height)
cpi->force_next_frame_intra = 1;
if (((cm->Width + 15) & 0xfffffff0) !=
cpi->alt_ref_source = NULL;
cpi->is_src_frame_alt_ref = 0;
+#if CONFIG_TEMPORAL_DENOISING
+ if (cpi->oxcf.noise_sensitivity)
+ {
+ if (!cpi->denoiser.yv12_mc_running_avg.buffer_alloc)
+ {
+ int width = (cpi->oxcf.Width + 15) & ~15;
+ int height = (cpi->oxcf.Height + 15) & ~15;
+ vp8_denoiser_allocate(&cpi->denoiser, width, height);
+ }
+ }
+#endif
#if 0
// Experimental RD Code
vp8cx_remove_encoder_threads(cpi);
#endif
+#if CONFIG_TEMPORAL_DENOISING
+ vp8_denoiser_free(&cpi->denoiser);
+#endif
dealloc_compressor_data(cpi);
vpx_free(cpi->mb.ss);
vpx_free(cpi->tok);
(void) frame_flags;
vp8_set_quantizer(cpi, 26);
- scale_and_extend_source(cpi->un_scaled_source, cpi);
vp8_first_pass(cpi);
}
#endif
}
vp8_yv12_extend_frame_borders_ptr(cm->frame_to_show);
-
+#if CONFIG_TEMPORAL_DENOISING
+ if (cpi->oxcf.noise_sensitivity)
+ {
+ vp8_yv12_extend_frame_borders(&cpi->denoiser.yv12_running_avg);
+ }
+#endif
}
static void encode_frame_to_data_rate
int Loop = 0;
int loop_count;
- int this_q;
- int last_zbin_oq;
+ VP8_COMMON *cm = &cpi->common;
+ int active_worst_qchanged = 0;
+
+#if !(CONFIG_REALTIME_ONLY)
int q_low;
int q_high;
int zbin_oq_high;
int zbin_oq_low = 0;
int top_index;
int bottom_index;
- VP8_COMMON *cm = &cpi->common;
- int active_worst_qchanged = 0;
-
int overshoot_seen = 0;
int undershoot_seen = 0;
+#endif
+
int drop_mark = cpi->oxcf.drop_frames_water_mark * cpi->oxcf.optimal_buffer_level / 100;
int drop_mark75 = drop_mark * 2 / 3;
int drop_mark50 = drop_mark / 4;
// Clear down mmx registers to allow floating point in what follows
vp8_clear_system_state();
+#if CONFIG_MULTITHREAD
+ /* wait for the last picture loopfilter thread done */
+ if (cpi->b_lpf_running)
+ {
+ sem_wait(&cpi->h_event_end_lpf);
+ cpi->b_lpf_running = 0;
+ }
+#endif
+
// Test code for segmentation of gf/arf (0,0)
//segmentation_test_function( cpi);
{
cpi->decimation_factor = 1;
}
-
//vpx_log("Encoder: Decimation Factor: %d \n",cpi->decimation_factor);
}
// Determine initial Q to try
Q = vp8_regulate_q(cpi, cpi->this_frame_target);
- last_zbin_oq = cpi->zbin_over_quant;
+
+#if !(CONFIG_REALTIME_ONLY)
// Set highest allowed value for Zbin over quant
if (cm->frame_type == KEY_FRAME)
}
else
zbin_oq_high = ZBIN_OQ_MAX;
+#endif
// Setup background Q adjustment for error resilient mode.
// For multi-layer encodes only enable this for the base layer.
vp8_compute_frame_size_bounds(cpi, &frame_under_shoot_limit, &frame_over_shoot_limit);
+#if !(CONFIG_REALTIME_ONLY)
// Limit Q range for the adaptive loop.
bottom_index = cpi->active_best_quality;
top_index = cpi->active_worst_quality;
q_low = cpi->active_best_quality;
q_high = cpi->active_worst_quality;
+#endif
vp8_save_coding_context(cpi);
loop_count = 0;
-
scale_and_extend_source(cpi->un_scaled_source, cpi);
-#if !(CONFIG_REALTIME_ONLY) && CONFIG_POSTPROC
+
+#if !(CONFIG_REALTIME_ONLY) && CONFIG_POSTPROC && !(CONFIG_TEMPORAL_DENOISING)
if (cpi->oxcf.noise_sensitivity > 0)
{
*/
vp8_set_quantizer(cpi, Q);
- this_q = Q;
// setup skip prob for costing in mode/mv decision
if (cpi->common.mb_no_coeff_skip)
vp8_setup_key_frame(cpi);
}
-#if CONFIG_MULTITHREAD
- /* wait for the last picture loopfilter thread done */
- if (cpi->b_lpf_running)
+
+
+#if CONFIG_REALTIME_ONLY & CONFIG_ONTHEFLY_BITPACKING
{
- sem_wait(&cpi->h_event_end_lpf);
- cpi->b_lpf_running = 0;
- }
-#endif
+ if(cpi->oxcf.error_resilient_mode)
+ cm->refresh_entropy_probs = 0;
+
+ if (cpi->oxcf.error_resilient_mode & VPX_ERROR_RESILIENT_PARTITIONS)
+ {
+ if (cm->frame_type == KEY_FRAME)
+ cm->refresh_entropy_probs = 1;
+ }
+ if (cm->refresh_entropy_probs == 0)
+ {
+ // save a copy for later refresh
+ vpx_memcpy(&cm->lfc, &cm->fc, sizeof(cm->fc));
+ }
+
+ vp8_update_coef_context(cpi);
+
+ vp8_update_coef_probs(cpi);
+
+ // transform / motion compensation build reconstruction frame
+ // +pack coef partitions
+ vp8_encode_frame(cpi);
+
+ /* cpi->projected_frame_size is not needed for RT mode */
+ }
+#else
// transform / motion compensation build reconstruction frame
vp8_encode_frame(cpi);
cpi->projected_frame_size -= vp8_estimate_entropy_savings(cpi);
cpi->projected_frame_size = (cpi->projected_frame_size > 0) ? cpi->projected_frame_size : 0;
-
+#endif
vp8_clear_system_state(); //__asm emms;
// Test to see if the stats generated for this frame indicate that we should have coded a key frame
if (cpi->compressor_speed == 2)
{
/* we don't do re-encoding in realtime mode
- * if key frame is decided than we force it on next frame */
+ * if key frame is decided then we force it on next frame */
cpi->force_next_frame_intra = key_frame_decision;
}
+#if !(CONFIG_REALTIME_ONLY)
else if (key_frame_decision)
{
// Reset all our sizing numbers and recode
continue;
}
+#endif
}
vp8_clear_system_state();
while ((cpi->active_worst_quality < cpi->worst_quality) && (over_size_percent > 0))
{
cpi->active_worst_quality++;
- top_index = cpi->active_worst_quality;
+
over_size_percent = (int)(over_size_percent * 0.96); // Assume 1 qstep = about 4% on frame size.
}
-
+#if !(CONFIG_REALTIME_ONLY)
+ top_index = cpi->active_worst_quality;
+#endif
// If we have updated the active max Q do not call vp8_update_rate_correction_factors() this loop.
active_worst_qchanged = 1;
}
// Clamp cpi->zbin_over_quant
cpi->zbin_over_quant = (cpi->zbin_over_quant < zbin_oq_low) ? zbin_oq_low : (cpi->zbin_over_quant > zbin_oq_high) ? zbin_oq_high : cpi->zbin_over_quant;
- //Loop = (Q != last_q) || (last_zbin_oq != cpi->zbin_over_quant);
Loop = Q != last_q;
- last_zbin_oq = cpi->zbin_over_quant;
}
else
#endif
update_reference_frames(cm);
+#if !(CONFIG_REALTIME_ONLY & CONFIG_ONTHEFLY_BITPACKING)
if (cpi->oxcf.error_resilient_mode)
{
cm->refresh_entropy_probs = 0;
}
+#endif
#if CONFIG_MULTITHREAD
/* wait that filter_level is picked so that we can continue with stream packing */
cpi->source_alt_ref_pending)
{
if ((cpi->source = vp8_lookahead_peek(cpi->lookahead,
- cpi->frames_till_gf_update_due)))
+ cpi->frames_till_gf_update_due,
+ PEEK_FORWARD)))
{
cpi->alt_ref_source = cpi->source;
if (cpi->oxcf.arnr_max_frames > 0)
if (!cpi->source)
{
+ /* Read last frame source if we are encoding first pass. */
+ if (cpi->pass == 1 && cm->current_video_frame > 0)
+ {
+ if((cpi->last_source = vp8_lookahead_peek(cpi->lookahead, 1,
+ PEEK_BACKWARD)) == NULL)
+ return -1;
+ }
+
+
if ((cpi->source = vp8_lookahead_pop(cpi->lookahead, flush)))
{
cm->show_frame = 1;
*time_stamp = cpi->source->ts_start;
*time_end = cpi->source->ts_end;
*frame_flags = cpi->source->flags;
+
+ if (cpi->pass == 1 && cm->current_video_frame > 0)
+ {
+ cpi->last_frame_unscaled_source = &cpi->last_source->img;
+ }
}
else
{
}
// adjust frame rates based on timestamps given
- if (!cm->refresh_alt_ref_frame || (cpi->oxcf.number_of_layers > 1))
+ if (cm->show_frame)
{
int64_t this_duration;
int step = 0;
vpx_usec_timer_start(&ticktimer);
}
+#if CONFIG_REALTIME_ONLY & CONFIG_ONTHEFLY_BITPACKING
+ {
+ int i;
+ const int num_part = (1 << cm->multi_token_partition);
+ /* the available bytes in dest */
+ const unsigned long dest_size = dest_end - dest;
+ const int tok_part_buff_size = (dest_size * 9) / (10 * num_part);
+
+ unsigned char *dp = dest;
+
+ cpi->partition_d[0] = dp;
+ dp += dest_size/10; /* reserve 1/10 for control partition */
+ cpi->partition_d_end[0] = dp;
+
+ for(i = 0; i < num_part; i++)
+ {
+ cpi->partition_d[i + 1] = dp;
+ dp += tok_part_buff_size;
+ cpi->partition_d_end[i + 1] = dp;
+ }
+ }
+#endif
+
// start with a 0 size frame
*size = 0;
double frame_psnr;
YV12_BUFFER_CONFIG *orig = cpi->Source;
YV12_BUFFER_CONFIG *recon = cpi->common.frame_to_show;
- YV12_BUFFER_CONFIG *pp = &cm->post_proc_buffer;
int y_samples = orig->y_height * orig->y_width ;
int uv_samples = orig->uv_height * orig->uv_width ;
int t_samples = y_samples + 2 * uv_samples;
cpi->total_v += vp8_mse2psnr(uv_samples, 255.0, ve);
cpi->total_sq_error += sq_error;
cpi->total += frame_psnr;
+#if CONFIG_POSTPROC
{
+ YV12_BUFFER_CONFIG *pp = &cm->post_proc_buffer;
double frame_psnr2, frame_ssim2 = 0;
double weight = 0;
}
}
}
+#endif
}
if (cpi->b_calculate_ssimg)
projects / profile / ivi / libvpx.git / blobdiff