uint32_t page_size;
uint32_t spare_size;
uint32_t gfh_offset;
+ bool snfi;
};
/* AP BROM Header for NAND */
uint8_t data[0x80];
};
+/* HSM BROM Header for NAND */
+union hsm_nand_boot_header {
+ struct {
+ char id[8];
+ uint32_t version; /* Header version */
+ uint32_t config; /* Header config */
+ uint32_t sector_size; /* ECC step size */
+ uint32_t fdm_size; /* User OOB size of a step */
+ uint32_t fdm_ecc_size; /* ECC parity size of a step */
+ uint32_t lbs;
+ uint32_t page_size; /* NAND page size */
+ uint32_t spare_size; /* NAND page spare size */
+ uint32_t page_per_block; /* Pages of one block */
+ uint32_t blocks; /* Total blocks of NAND chip */
+ uint32_t plane_sel_position; /* Plane bit position */
+ uint32_t pll; /* Value of pll reg */
+ uint32_t acccon; /* Value of access timing reg */
+ uint32_t strobe_sel; /* Value of DQS selection reg*/
+ uint32_t acccon1; /* Value of access timing reg */
+ uint32_t dqs_mux; /* Value of DQS mux reg */
+ uint32_t dqs_ctrl; /* Value of DQS control reg */
+ uint32_t delay_ctrl; /* Value of delay ctrl reg */
+ uint32_t latch_lat; /* Value of latch latency reg */
+ uint32_t sample_delay; /* Value of sample delay reg */
+ uint32_t driving; /* Value of driving reg */
+ uint32_t bl_start; /* Bootloader start addr */
+ uint32_t bl_end; /* Bootloader end addr */
+ uint8_t ecc_parity[42]; /* ECC parity of this header */
+ };
+
+ uint8_t data[0x8E];
+};
+
+/* HSM2.0 BROM Header for NAND */
+union hsm20_nand_boot_header {
+ struct {
+ char id[8];
+ uint32_t version; /* Header version */
+ uint32_t config; /* Header config */
+ uint32_t sector_size; /* ECC step size */
+ uint32_t fdm_size; /* User OOB size of a step */
+ uint32_t fdm_ecc_size; /* ECC parity size of a step */
+ uint32_t lbs;
+ uint32_t page_size; /* NAND page size */
+ uint32_t spare_size; /* NAND page spare size */
+ uint32_t page_per_block; /* Pages of one block */
+ uint32_t blocks; /* Total blocks of NAND chip */
+ uint32_t plane_sel_position; /* Plane bit position */
+ uint32_t pll; /* Value of pll reg */
+ uint32_t acccon; /* Value of access timing reg */
+ uint32_t strobe_sel; /* Value of DQS selection reg*/
+ uint32_t acccon1; /* Value of access timing reg */
+ uint32_t dqs_mux; /* Value of DQS mux reg */
+ uint32_t dqs_ctrl; /* Value of DQS control reg */
+ uint32_t delay_ctrl; /* Value of delay ctrl reg */
+ uint32_t latch_lat; /* Value of latch latency reg */
+ uint32_t sample_delay; /* Value of sample delay reg */
+ uint32_t driving; /* Value of driving reg */
+ uint32_t reserved;
+ uint32_t bl0_start; /* Bootloader start addr */
+ uint32_t bl0_end; /* Bootloader end addr */
+ uint32_t bl0_type; /* Bootloader type */
+ uint8_t bl_reserve[84];
+ uint8_t ecc_parity[42]; /* ECC parity of this header */
+ };
+
+ uint8_t data[0xEA];
+};
+
+/* SPIM BROM Header for SPI-NAND */
+union spim_nand_boot_header {
+ struct {
+ char id[8];
+ uint32_t version; /* Header version */
+ uint32_t config; /* Header config */
+ uint32_t page_size; /* NAND page size */
+ uint32_t spare_size; /* NAND page spare size */
+ uint16_t page_per_block; /* Pages of one block */
+ uint16_t plane_sel_position; /* Plane bit position */
+ uint16_t reserve_reg;
+ uint16_t reserve_val;
+ uint16_t ecc_error; /* ECC error reg addr */
+ uint16_t ecc_mask; /* ECC error bit mask */
+ uint32_t bl_start; /* Bootloader start addr */
+ uint32_t bl_end; /* Bootloader end addr */
+ uint8_t ecc_parity[32]; /* ECC parity of this header */
+ uint32_t integrity_crc; /* CRC of this header */
+ };
+
+ uint8_t data[0x50];
+};
+
+enum nand_boot_header_type {
+ NAND_BOOT_AP_HEADER,
+ NAND_BOOT_HSM_HEADER,
+ NAND_BOOT_HSM20_HEADER,
+ NAND_BOOT_SPIM_HEADER
+};
+
#define NAND_BOOT_NAME "BOOTLOADER!"
#define NAND_BOOT_VERSION "V006"
#define NAND_BOOT_ID "NFIINFO"
+#define HSM_NAND_BOOT_NAME "NANDCFG!"
+#define SPIM_NAND_BOOT_NAME "SPINAND!"
+
/* Find nand header data by name */
-const union nand_boot_header *mtk_nand_header_find(const char *name);
+const struct nand_header_type *mtk_nand_header_find(const char *name);
/* Device header size using this nand header */
-uint32_t mtk_nand_header_size(const union nand_boot_header *hdr_nand);
+uint32_t mtk_nand_header_size(const struct nand_header_type *hdr_nand);
/* Get nand info from nand header (page size, spare size, ...) */
int mtk_nand_header_info(const void *ptr, struct nand_header_info *info);
bool is_mtk_nand_header(const void *ptr);
/* Generate Device header using give nand header */
-uint32_t mtk_nand_header_put(const union nand_boot_header *hdr_nand, void *ptr);
+uint32_t mtk_nand_header_put(const struct nand_header_type *hdr_nand,
+ void *ptr);
#endif /* _MTK_NAND_HEADERS_H */
projects / platform / kernel / u-boot.git / blobdiff