# | (__| |_| | _ <| |___
# \___|\___/|_| \_\_____|
#
-# Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
-# $Id$
###########################################################################
###########################
# What is This Script?
###########################
-# testcurl.pl is the master script to use for automatic testing of CVS-curl.
+# testcurl.pl is the master script to use for automatic testing of curl
+# directly off its source repository.
# This is written for the purpose of being run from a crontab job or similar
# at a regular interval. The output is suitable to be mailed to
# curl-autocompile@haxx.se to be dealt with automatically (make sure the
# --crosscompile This is a crosscompile
# --desc=[desc] Description of your test system
# --email=[email] Set email address to report as
+# --extvercmd=[command] Command to use for displaying version with cross compiles.
# --mktarball=[command] Command to run after completed test
# --name=[name] Set name to report as
-# --nocvsup Don't update from CVS even though it is a CVS tree
+# --nocvsup Don't pull from git even though it is a git tree
+# --nogitpull Don't pull from git even though it is a git tree
# --nobuildconf Don't run buildconf
+# --noconfigure Don't run configure
# --runtestopts=[options] Options to pass to runtests.pl
# --setup=[file name] File name to read setup from (deprecated)
# --target=[your os] Specify your target environment.
#
-# if [curl-daily-name] is omitted, a 'curl' CVS directory is assumed.
+# if [curl-daily-name] is omitted, a 'curl' git directory is assumed.
#
use strict;
# Turn on warnings (equivalent to -w, which can't be used with /usr/bin/env)
#BEGIN { $^W = 1; }
-use vars qw($version $fixed $infixed $CURLDIR $CVS $pwd $build $buildlog
- $buildlogname $configurebuild $targetos $confsuffix $binext
+use vars qw($version $fixed $infixed $CURLDIR $git $pwd $build $buildlog
+ $buildlogname $configurebuild $targetos $confheader $binext
$libext);
+
use vars qw($name $email $desc $confopts $runtestopts $setupfile $mktarball
- $nocvsup $nobuildconf $crosscompile);
+ $extvercmd $nogitpull $nobuildconf $crosscompile
+ $timestamp $notes);
# version of this script
-$version='$Revision$';
+$version='2014-11-25';
$fixed=0;
-# Determine if we're running from CVS or a canned copy of curl,
+# Determine if we're running from git or a canned copy of curl,
# or if we got a specific target option or setup file option.
$CURLDIR="curl";
-$CVS=1;
+if (-f ".git/config") {
+ $CURLDIR = "./";
+}
+
+$git=1;
$setupfile = 'setup';
+$configurebuild = 1;
while ($ARGV[0]) {
if ($ARGV[0] =~ /--target=/) {
$targetos = (split(/=/, shift @ARGV))[1];
elsif ($ARGV[0] =~ /--setup=/) {
$setupfile = (split(/=/, shift @ARGV))[1];
}
+ elsif ($ARGV[0] =~ /--extvercmd=/) {
+ $extvercmd = (split(/=/, shift @ARGV))[1];
+ }
elsif ($ARGV[0] =~ /--mktarball=/) {
$mktarball = (split(/=/, shift @ARGV))[1];
}
elsif ($ARGV[0] =~ /--desc=/) {
$desc = (split(/=/, shift @ARGV))[1];
}
- elsif ($ARGV[0] =~ /--configure=/) {
- $confopts = (split(/=/, shift @ARGV))[1];
+ elsif ($ARGV[0] =~ /--configure=(.*)/) {
+ $confopts = $1;
+ shift @ARGV;
}
- elsif ($ARGV[0] =~ /--nocvsup/) {
- $nocvsup=1;
+ elsif (($ARGV[0] eq "--nocvsup") || ($ARGV[0] eq "--nogitpull")) {
+ $nogitpull=1;
shift @ARGV;
}
elsif ($ARGV[0] =~ /--nobuildconf/) {
$nobuildconf=1;
shift @ARGV;
}
+ elsif ($ARGV[0] =~ /--noconfigure/) {
+ $configurebuild=0;
+ shift @ARGV;
+ }
elsif ($ARGV[0] =~ /--crosscompile/) {
$crosscompile=1;
shift @ARGV;
}
else {
$CURLDIR=shift @ARGV;
- $CVS=0;
+ $git=0; # a given dir, assume not using git
}
}
# Do the platform-specific stuff here
-$configurebuild = 1;
-$confsuffix = '';
+$confheader = 'curl_config.h';
$binext = '';
$libext = '.la'; # .la since both libcurl and libcares are made with libtool
if ($^O eq 'MSWin32' || $targetos) {
# If no target defined on Win32 lets assume vc
$targetos = 'vc';
}
- if ($targetos =~ /vc/ || $targetos =~ /mingw32/ || $targetos =~ /borland/) {
+ if ($targetos =~ /vc/ || $targetos =~ /borland/ || $targetos =~ /watcom/) {
$binext = '.exe';
- $libext = '.lib' if ($targetos =~ /vc/ || $targetos =~ /borland/);
- $libext = '.a' if ($targetos =~ /mingw32/);
+ $libext = '.lib';
+ }
+ elsif ($targetos =~ /mingw/) {
+ $binext = '.exe';
+ if ($^O eq 'MSWin32') {
+ $libext = '.a';
+ }
}
elsif ($targetos =~ /netware/) {
$configurebuild = 0;
$binext = '.nlm';
- $libext = '.lib';
+ if ($^O eq 'MSWin32') {
+ $libext = '.lib';
+ }
+ else {
+ $libext = '.a';
+ }
}
}
-if (($^O eq 'MSWin32') && ($targetos =~ /vc/ || $targetos =~ /mingw32/ || $targetos =~ /borland/)) {
+if (($^O eq 'MSWin32' || $^O eq 'msys') &&
+ ($targetos =~ /vc/ || $targetos =~ /mingw32/ ||
+ $targetos =~ /borland/ || $targetos =~ /watcom/)) {
# Set these things only when building ON Windows and for Win32 platform.
# FOR Windows since we might be cross-compiling on another system. Non-
- # Windows builds still default to configure-style builds with no confsuffix.
+ # Windows builds still default to configure-style builds with curl_config.h.
$configurebuild = 0;
- $confsuffix = '-win32';
+ $confheader = 'config-win32.h';
}
-
+$ENV{LC_ALL}="C" if (($ENV{LC_ALL}) && ($ENV{LC_ALL} !~ /^C$/));
+$ENV{LC_CTYPE}="C" if (($ENV{LC_CTYPE}) && ($ENV{LC_CTYPE} !~ /^C$/));
$ENV{LANG}="C";
sub rmtree($) {
}
}
+sub logit_spaced($) {
+ my $text=$_[0];
+ if ($text) {
+ print "\ntestcurl: $text\n\n";
+ }
+}
+
sub mydie($){
my $text=$_[0];
logit "$text";
exit 1;
}
-if (open(F, "$setupfile")) {
+sub get_host_triplet {
+ my $triplet;
+ my $configfile = "$pwd/$build/lib/curl_config.h";
+
+ if(-f $configfile && -s $configfile && open(LIBCONFIGH, "<$configfile")) {
+ while(<LIBCONFIGH>) {
+ if($_ =~ /^\#define\s+OS\s+"*([^"][^"]*)"*\s*/) {
+ $triplet = $1;
+ last;
+ }
+ }
+ close(LIBCONFIGH);
+ }
+ return $triplet;
+}
+
+if($name && $email && $desc) {
+ # having these fields set are enough to continue, skip reading the setup
+ # file
+ $infixed=4;
+ $fixed=4;
+}
+elsif (open(F, "$setupfile")) {
while (<F>) {
if (/(\w+)=(.*)/) {
eval "\$$1=$2;";
}
close(F);
$infixed=$fixed;
-} else {
+}
+else {
$infixed=0; # so that "additional args to configure" works properly first time...
}
print F "email='$email'\n";
print F "desc='$desc'\n";
print F "confopts='$confopts'\n";
+ print F "notes='$notes'\n";
print F "fixed='$fixed'\n";
close(F);
}
+# Enable picky compiler warnings unless explicitly disabled
+if (($confopts !~ /--enable-debug/) &&
+ ($confopts !~ /--enable-warnings/) &&
+ ($confopts !~ /--disable-warnings/)) {
+ $confopts .= " --enable-warnings";
+}
+
+my $str1066os = 'o' x 1066;
+
+# Set timestamp to the UTC this script is running. Its value might
+# be changed later in the script to the value present in curlver.h
+$timestamp = scalar(gmtime)." UTC";
+
logit "STARTING HERE"; # first line logged, for scripts to trigger on
+logit 'TRANSFER CONTROL ==== 1120 CHAR LINE' . $str1066os . 'LINE_END';
logit "NAME = $name";
logit "EMAIL = $email";
logit "DESC = $desc";
+logit "NOTES = $notes";
logit "CONFOPTS = $confopts";
+logit "RUNTESTOPTS = ".$runtestopts;
logit "CPPFLAGS = ".$ENV{CPPFLAGS};
logit "CFLAGS = ".$ENV{CFLAGS};
logit "LDFLAGS = ".$ENV{LDFLAGS};
+logit "LIBS = ".$ENV{LIBS};
logit "CC = ".$ENV{CC};
+logit "TMPDIR = ".$ENV{TMPDIR};
+logit "MAKEFLAGS = ".$ENV{MAKEFLAGS};
+logit "ACLOCAL_FLAGS = ".$ENV{ACLOCAL_FLAGS};
+logit "PKG_CONFIG_PATH = ".$ENV{PKG_CONFIG_PATH};
+logit "DYLD_LIBRARY_PATH = ".$ENV{DYLD_LIBRARY_PATH};
+logit "LD_LIBRARY_PATH = ".$ENV{LD_LIBRARY_PATH};
+logit "LIBRARY_PATH = ".$ENV{LIBRARY_PATH};
+logit "SHLIB_PATH = ".$ENV{SHLIB_PATH};
+logit "LIBPATH = ".$ENV{LIBPATH};
logit "target = ".$targetos;
logit "version = $version"; # script version
-logit "date = ".(scalar gmtime)." UTC";
+logit "date = $timestamp"; # When the test build starts
+
+$str1066os = undef;
# Make $pwd to become the path without newline. We'll use that in order to cut
# off that path from all possible logs and error messages etc.
-$pwd = cwd();
+$pwd = getcwd();
+
+my $have_embedded_ares = 0;
if (-d $CURLDIR) {
- if ($CVS && -d "$CURLDIR/CVS") {
- logit "$CURLDIR is verified to be a fine source dir";
+ if ($git && -d "$CURLDIR/.git") {
+ logit "$CURLDIR is verified to be a fine git source dir";
# remove the generated sources to force them to be re-generated each
# time we run this test
- unlink "$CURLDIR/src/hugehelp.c";
- } elsif (!$CVS && -f "$CURLDIR/tests/testcurl.pl") {
- logit "$CURLDIR is verified to be a fine daily source dir"
+ unlink "$CURLDIR/src/tool_hugehelp.c";
+ # find out if curl source dir has an in-tree c-ares repo
+ $have_embedded_ares = 1 if (-f "$CURLDIR/ares/GIT-INFO");
+ } elsif (!$git && -f "$CURLDIR/tests/testcurl.pl") {
+ logit "$CURLDIR is verified to be a fine daily source dir";
+ # find out if curl source dir has an in-tree c-ares extracted tarball
+ $have_embedded_ares = 1 if (-f "$CURLDIR/ares/ares_build.h");
} else {
- mydie "$CURLDIR is not a daily source dir or checked out from CVS!"
+ mydie "$CURLDIR is not a daily source dir or checked out from git!"
}
}
$build="build-$$";
# get in the curl source tree root
chdir $CURLDIR;
-# Do the CVS thing, or not...
-if ($CVS) {
+# Do the git thing, or not...
+if ($git) {
+ my $gitstat = 0;
+ my @commits;
- # this is a temporary fix to make things work again, remove later
- logit "remove ares/aclocal.m4";
- unlink "ares/aclocal.m4";
+ # update quietly to the latest git
+ if($nogitpull) {
+ logit "skipping git pull (--nogitpull)";
+ } else {
+ logit "run git pull in curl";
+ system("git pull 2>&1");
+ $gitstat += $?;
+ logit "failed to update from curl git ($?), continue anyway" if ($?);
- logit "update from CVS";
- my $cvsstat;
+ # Set timestamp to the UTC the git update took place.
+ $timestamp = scalar(gmtime)." UTC" if (!$gitstat);
+ }
- sub cvsup() {
- # update quietly to the latest CVS
- logit "run cvs up";
- if($nocvsup) {
- logit "Skipping CVS update (--nocvsup)";
- return 1;
- }
- else {
- system("cvs -Q up -dP 2>&1");
- }
+ # get the last 5 commits for show (even if no pull was made)
+ @commits=`git log --pretty=oneline --abbrev-commit -5`;
+ logit "The most recent curl git commits:";
+ for (@commits) {
+ chomp ($_);
+ logit " $_";
+ }
- $cvsstat=$?;
+ if (-d "ares/.git") {
+ chdir "ares";
- # return !RETURNVALUE so that errors return 0 while goodness
- # returns 1
- return !$cvsstat;
- }
+ if($nogitpull) {
+ logit "skipping git pull (--nogitpull) in ares";
+ } else {
+ logit "run git pull in ares";
+ system("git pull 2>&1");
+ $gitstat += $?;
+ logit "failed to update from ares git ($?), continue anyway" if ($?);
- my $att=0;
- while (!cvsup()) {
- $att++;
- logit "failed CVS update attempt number $att.";
- if ($att > 10) {
- $cvsstat=111;
- last; # get out of the loop
+ # Set timestamp to the UTC the git update took place.
+ $timestamp = scalar(gmtime)." UTC" if (!$gitstat);
+ }
+
+ # get the last 5 commits for show (even if no pull was made)
+ @commits=`git log --pretty=oneline --abbrev-commit -5`;
+ logit "The most recent ares git commits:";
+ for (@commits) {
+ chomp ($_);
+ logit " $_";
}
- sleep 5;
- }
- if ($cvsstat != 0) {
- mydie "failed to update from CVS ($cvsstat), exiting";
+ chdir "$pwd/$CURLDIR";
}
if($nobuildconf) {
- logit "told to not run buildconf";
+ logit "told to not run buildconf";
}
elsif ($configurebuild) {
# remove possible left-overs from the past
unlink "autom4te.cache";
# generate the build files
- logit "invoke buildconf, but filter off the silly aclocal warnings";
+ logit "invoke buildconf";
open(F, "./buildconf 2>&1 |") or die;
open(LOG, ">$buildlog") or die;
while (<F>) {
- next if /warning: underquoted definition of/;
- print;
- print LOG;
+ my $ll = $_;
+ # ignore messages pertaining to third party m4 files we don't care
+ next if ($ll =~ /aclocal\/gtk\.m4/);
+ next if ($ll =~ /aclocal\/gtkextra\.m4/);
+ print $ll;
+ print LOG $ll;
}
close(F);
close(LOG);
else {
mydie "buildconf was NOT successful";
}
-
- if($confopts =~ /--enable-ares/) {
- logit "run buildconf for ares";
- chdir "ares";
- open(F, "./buildconf 2>&1 |") or die;
- open(LOG, ">$buildlog") or die;
- while (<F>) {
- next if /warning: underquoted definition of/;
- print;
- print LOG;
- }
- close(F);
- close(LOG);
- chdir "..";
- }
-
}
else {
logit "buildconf was successful (dummy message)";
}
}
+# Set timestamp to the one in curlver.h if this isn't a git test build.
+if ((-f "include/curl/curlver.h") &&
+ (open(F, "<include/curl/curlver.h"))) {
+ while (<F>) {
+ chomp;
+ if ($_ =~ /^\#define\s+LIBCURL_TIMESTAMP\s+\"(.+)\".*$/) {
+ my $stampstring = $1;
+ if ($stampstring !~ /DEV/) {
+ $stampstring =~ s/\s+UTC//;
+ $timestamp = $stampstring." UTC";
+ }
+ last;
+ }
+ }
+ close(F);
+}
+
+# Show timestamp we are using for this test build.
+logit "timestamp = $timestamp";
+
if ($configurebuild) {
if (-f "configure") {
logit "configure created (at least it exists)";
sub findinpath {
my $c;
my $e;
- my $x='';
- $x='.exe' if ($^O eq 'MSWin32');
- my $s=':';
- $s=';' if ($^O eq 'MSWin32');
+ my $x = ($^O eq 'MSWin32') ? '.exe' : '';
+ my $s = ($^O eq 'MSWin32') ? ';' : ':';
my $p=$ENV{'PATH'};
my @pa = split($s, $p);
for $c (@_) {
if(!$make) {
mydie "Couldn't find make in the PATH";
}
+# force to 'nmake' for VC builds
+$make = "nmake" if ($targetos =~ /vc/);
+# force to 'wmake' for Watcom builds
+$make = "wmake" if ($targetos =~ /watcom/);
logit "going with $make as make";
# change to build dir
mydie "configure didn't work";
}
} else {
+ logit "copying files to build dir ...";
if (($^O eq 'MSWin32') && ($targetos !~ /netware/)) {
system("xcopy /s /q ..\\$CURLDIR .");
system("buildconf.bat");
}
- elsif (($^O eq 'linux') || ($targetos =~ /netware/)) {
- system("cp -afr ../$CURLDIR/* .");
- system("cp -af ../$CURLDIR/Makefile.dist Makefile");
+ elsif ($targetos =~ /netware/) {
+ system("cp -afr ../$CURLDIR/* .");
+ system("cp -af ../$CURLDIR/Makefile.dist Makefile");
+ system("$make -i -C lib -f Makefile.netware prebuild");
+ system("$make -i -C src -f Makefile.netware prebuild");
+ if (-d "../$CURLDIR/ares") {
+ system("$make -i -C ares -f Makefile.netware prebuild");
+ }
+ }
+ elsif ($^O eq 'linux') {
+ system("cp -afr ../$CURLDIR/* .");
+ system("cp -af ../$CURLDIR/Makefile.dist Makefile");
+ system("cp -af ../$CURLDIR/include/curl/curlbuild.h.dist ./include/curl/curlbuild.h");
system("$make -i -C lib -f Makefile.$targetos prebuild");
system("$make -i -C src -f Makefile.$targetos prebuild");
+ if (-d "../$CURLDIR/ares") {
+ system("cp -af ../$CURLDIR/ares/ares_build.h.dist ./ares/ares_build.h");
+ system("$make -i -C ares -f Makefile.$targetos prebuild");
+ }
}
}
-logit "display lib/config$confsuffix.h";
-open(F, "lib/config$confsuffix.h") or die "lib/config$confsuffix.h: $!";
+if(-f "./libcurl.pc") {
+ logit_spaced "display libcurl.pc";
+ if(open(F, "<./libcurl.pc")) {
+ while(<F>) {
+ my $ll = $_;
+ print $ll if(($ll !~ /^ *#/) && ($ll !~ /^ *$/));
+ }
+ close(F);
+ }
+}
+
+if(-f "./include/curl/curlbuild.h") {
+ logit_spaced "display include/curl/curlbuild.h";
+ if(open(F, "<./include/curl/curlbuild.h")) {
+ while(<F>) {
+ my $ll = $_;
+ print $ll if(($ll =~ /^ *# *define *CURL_/) && ($ll !~ /__CURL_CURLBUILD_H/));
+ }
+ close(F);
+ }
+}
+else {
+ mydie "no curlbuild.h created/found";
+}
+
+logit_spaced "display lib/$confheader";
+open(F, "lib/$confheader") or die "lib/$confheader: $!";
while (<F>) {
print if /^ *#/;
}
close(F);
-if (grepfile("define USE_ARES", "lib/config$confsuffix.h")) {
+if (($have_embedded_ares) &&
+ (grepfile("^#define USE_ARES", "lib/$confheader"))) {
+ print "\n";
logit "setup to build ares";
- logit "display ares/config$confsuffix.h";
- if(open(F, "ares/config$confsuffix.h")) {
+ if(-f "./ares/libcares.pc") {
+ logit_spaced "display ares/libcares.pc";
+ if(open(F, "<./ares/libcares.pc")) {
+ while(<F>) {
+ my $ll = $_;
+ print $ll if(($ll !~ /^ *#/) && ($ll !~ /^ *$/));
+ }
+ close(F);
+ }
+ }
+
+ if(-f "./ares/ares_build.h") {
+ logit_spaced "display ares/ares_build.h";
+ if(open(F, "<./ares/ares_build.h")) {
+ while(<F>) {
+ my $ll = $_;
+ print $ll if(($ll =~ /^ *# *define *CARES_/) && ($ll !~ /__CARES_BUILD_H/));
+ }
+ close(F);
+ }
+ }
+ else {
+ mydie "no ares_build.h created/found";
+ }
+
+ $confheader =~ s/curl/ares/;
+ logit_spaced "display ares/$confheader";
+ if(open(F, "ares/$confheader")) {
while (<F>) {
print if /^ *#/;
}
close(F);
}
+ print "\n";
logit "build ares";
chdir "ares";
if (-f "libcares$libext") {
logit "ares is now built successfully (libcares$libext)";
} else {
- logit "ares build failed (libares$libext)";
+ mydie "ares build failed (libcares$libext)";
}
# cd back to the curl build dir
chdir "$pwd/$build";
}
-if ($configurebuild) {
- logit "$make -i";
- open(F, "$make -i 2>&1 |") or die;
- while (<F>) {
- s/$pwd//g;
- print;
- }
- close(F);
-}
-else {
- logit "$make -i $targetos";
- if ($^O eq 'MSWin32') {
- if ($targetos =~ /vc/) {
- open(F, "nmake -i $targetos|") or die;
- }
- else {
- open(F, "$make -i $targetos |") or die;
- }
- }
- else {
- open(F, "$make -i $targetos 2>&1 |") or die;
- }
- while (<F>) {
- s/$pwd//g;
- print;
- }
- close(F);
+my $mkcmd = "$make -i" . ($targetos && !$configurebuild ? " $targetos" : "");
+logit "$mkcmd";
+open(F, "$mkcmd 2>&1 |") or die;
+while (<F>) {
+ s/$pwd//g;
+ print;
}
+close(F);
if (-f "lib/libcurl$libext") {
- logit "lib/libcurl was created fine (libcurl$libext)";
+ logit "libcurl was created fine (libcurl$libext)";
}
else {
- logit "lib/libcurl was not created (libcurl$libext)";
+ mydie "libcurl was not created (libcurl$libext)";
}
if (-f "src/curl$binext") {
- logit "src/curl was created fine (curl$binext)";
+ logit "curl was created fine (curl$binext)";
}
else {
- mydie "src/curl was not created (curl$binext)";
+ mydie "curl was not created (curl$binext)";
}
-if ($targetos =~ /netware/) {
- if (-f '../../curlver') {
- system('../../curlver');
- }
-}
-elsif(!$crosscompile) {
- logit "display curl$binext --version output";
- open(F, "./src/curl$binext --version|");
+if (!$crosscompile || (($extvercmd ne '') && (-x $extvercmd))) {
+ logit "display curl${binext} --version output";
+ my $cmd = ($extvercmd ne '' ? $extvercmd.' ' : '')."./src/curl${binext} --version|";
+ open(F, $cmd);
while(<F>) {
- print;
- print LOG;
+ # strip CR from output on non-win32 platforms (wine on Linux)
+ s/\r// if ($^O ne 'MSWin32');
+ print;
}
close(F);
}
if ($configurebuild && !$crosscompile) {
+ my $host_triplet = get_host_triplet();
+ # build example programs for selected build targets
+ if(($host_triplet =~ /([^-]+)-([^-]+)-irix(.*)/) ||
+ ($host_triplet =~ /([^-]+)-([^-]+)-aix(.*)/) ||
+ ($host_triplet =~ /([^-]+)-([^-]+)-osf(.*)/) ||
+ ($host_triplet =~ /([^-]+)-([^-]+)-solaris2(.*)/)) {
+ chdir "$pwd/$build/docs/examples";
+ logit_spaced "build examples";
+ open(F, "$make -i 2>&1 |") or die;
+ open(LOG, ">$buildlog") or die;
+ while (<F>) {
+ s/$pwd//g;
+ print;
+ print LOG;
+ }
+ close(F);
+ close(LOG);
+ chdir "$pwd/$build";
+ }
+ # build and run full test suite
my $o;
if($runtestopts) {
$o = "TEST_F=\"$runtestopts\" ";
} else {
logit "the tests were successful!";
}
-} else {
- # dummy message to feign success
+}
+else {
if($crosscompile) {
- logit "cross-compiling, can't run tests";
+ my $host_triplet = get_host_triplet();
+ # build example programs for selected cross-compiles
+ if(($host_triplet =~ /([^-]+)-([^-]+)-mingw(.*)/) ||
+ ($host_triplet =~ /([^-]+)-([^-]+)-android(.*)/)) {
+ chdir "$pwd/$build/docs/examples";
+ logit_spaced "build examples";
+ open(F, "$make -i 2>&1 |") or die;
+ open(LOG, ">$buildlog") or die;
+ while (<F>) {
+ s/$pwd//g;
+ print;
+ print LOG;
+ }
+ close(F);
+ close(LOG);
+ chdir "$pwd/$build";
+ }
+ # build test harness programs for selected cross-compiles
+ if($host_triplet =~ /([^-]+)-([^-]+)-mingw(.*)/) {
+ chdir "$pwd/$build/tests";
+ logit_spaced "build test harness";
+ open(F, "$make -i 2>&1 |") or die;
+ open(LOG, ">$buildlog") or die;
+ while (<F>) {
+ s/$pwd//g;
+ print;
+ print LOG;
+ }
+ close(F);
+ close(LOG);
+ chdir "$pwd/$build";
+ }
+ logit_spaced "cross-compiling, can't run tests";
}
+ # dummy message to feign success
print "TESTDONE: 1 tests out of 0 (dummy message)\n";
}
# create a tarball if we got that option.
-if (($mktarball ne '') && (-f $mktarball)) {
+if (($mktarball ne '') && (-x $mktarball)) {
system($mktarball);
}