-#/usr/bin/env perl
-# $Id$
-# Starts sshd for use in the SCP, SFTP and SOCKS curl test harness tests.
-# Also creates the ssh configuration files (this could be moved to a
-# separate script).
+#!/usr/bin/env perl
+#***************************************************************************
+# _ _ ____ _
+# Project ___| | | | _ \| |
+# / __| | | | |_) | |
+# | (__| |_| | _ <| |___
+# \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1998 - 2011, 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at http://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+#***************************************************************************
-# Options:
-# -u user
-# -v
-# target_port
+# Starts sshd for use in the SCP, SFTP and SOCKS curl test harness tests.
+# Also creates the ssh configuration files needed for these tests.
use strict;
-use File::Spec;
+use warnings;
use Cwd;
-my $verbose=1; # set to 1 for debugging
-my $showfiles=0;
-
-my $port = 8999; # just our default, weird enough
-my $listenaddr = "127.0.0.1"; # address on which to listen
-
-my $conffile="curl_sshd_config"; # sshd configuration data
-my $conffile_ssh="curl_ssh_config"; # ssh configuration data
-my $knownhostsfile="curl_client_knownhosts"; # ssh knownhosts file
-
-my $path = getcwd();
-
-my $exeext;
-if ($^O eq 'MSWin32' || $^O eq 'cygwin' || $^O eq 'msys' || $^O eq 'dos' || $^O eq 'os2') {
- $exeext = '.exe';
-}
-
-# Where to look for sftp-server
-my @sftppath = qw(
- /usr/lib/openssh
- /usr/libexec/openssh
- /usr/libexec
- /usr/local/libexec
- /opt/local/libexec
- /usr/lib/ssh
- /usr/libexec/ssh
- /usr/sbin
- /usr/lib
- /usr/lib/ssh/openssh
- /usr/lib64/ssh
- /usr/lib64/misc
- /usr/lib/misc
- /usr/local/sbin
- /usr/freeware/bin
- /opt/ssh/sbin
- /opt/ssh/libexec
+#***************************************************************************
+# Variables and subs imported from sshhelp module
+#
+use sshhelp qw(
+ $sshdexe
+ $sshexe
+ $sftpsrvexe
+ $sftpexe
+ $sshkeygenexe
+ $sshdconfig
+ $sshconfig
+ $sftpconfig
+ $knownhosts
+ $sshdlog
+ $sshlog
+ $sftplog
+ $sftpcmds
+ $hstprvkeyf
+ $hstpubkeyf
+ $cliprvkeyf
+ $clipubkeyf
+ display_sshdconfig
+ display_sshconfig
+ display_sftpconfig
+ display_sshdlog
+ display_sshlog
+ display_sftplog
+ dump_array
+ find_sshd
+ find_ssh
+ find_sftpsrv
+ find_sftp
+ find_sshkeygen
+ logmsg
+ sshversioninfo
+ );
+
+#***************************************************************************
+# Subs imported from serverhelp module
+#
+use serverhelp qw(
+ server_pidfilename
+ server_logfilename
);
-my $username = $ENV{USER};
-
-# Find a file somewhere in the given path
-sub searchpath {
- my $fn = $_[0] . $exeext;
- shift;
- my @path = @_;
- foreach (@path) {
- my $file = File::Spec->catfile($_, $fn);
- if (-e $file) {
- return $file;
- }
- }
-}
-
-# Display contents of the given file.
-sub displayfile {
- my ($file) = @_;
- print "=== Start of file $file\n";
- if(open(SINGLE, "<$file")) {
- while(my $string = <SINGLE>) {
- print "$string";
+
+#***************************************************************************
+
+my $verbose = 0; # set to 1 for debugging
+my $debugprotocol = 0; # set to 1 for protocol debugging
+my $port = 8999; # our default SCP/SFTP server port
+my $socksport = $port + 1; # our default SOCKS4/5 server port
+my $listenaddr = '127.0.0.1'; # default address on which to listen
+my $ipvnum = 4; # default IP version of listener address
+my $idnum = 1; # dafault ssh daemon instance number
+my $proto = 'ssh'; # protocol the ssh daemon speaks
+my $path = getcwd(); # current working directory
+my $logdir = $path .'/log'; # directory for log files
+my $username = $ENV{USER}; # default user
+my $pidfile; # ssh daemon pid file
+
+my $error;
+my @cfgarr;
+
+
+#***************************************************************************
+# Parse command line options
+#
+while(@ARGV) {
+ if($ARGV[0] eq '--verbose') {
+ $verbose = 1;
+ }
+ elsif($ARGV[0] eq '--debugprotocol') {
+ $verbose = 1;
+ $debugprotocol = 1;
+ }
+ elsif($ARGV[0] eq '--user') {
+ if($ARGV[1]) {
+ $username = $ARGV[1];
+ shift @ARGV;
}
- close(SINGLE);
}
- print "=== End of file $file\n";
-}
-
-# Append a string to sshd config file
-sub set_sshd_option {
- my ($string) = @_;
- if (open(FILE, ">>$conffile")) {
- print FILE "$string\n";
- close FILE;
+ elsif($ARGV[0] eq '--id') {
+ if($ARGV[1]) {
+ if($ARGV[1] =~ /^(\d+)$/) {
+ $idnum = $1 if($1 > 0);
+ shift @ARGV;
+ }
+ }
}
-}
-
-# Append a string to ssh config file
-sub set_ssh_option {
- my ($string) = @_;
- if (open(FILE, ">>$conffile_ssh")) {
- print FILE "$string\n";
- close FILE;
+ elsif($ARGV[0] eq '--ipv4') {
+ $ipvnum = 4;
+ $listenaddr = '127.0.0.1' if($listenaddr eq '::1');
}
-}
-
-# Parse options
-do {
- if($ARGV[0] eq "-v") {
- $verbose=1;
+ elsif($ARGV[0] eq '--ipv6') {
+ $ipvnum = 6;
+ $listenaddr = '::1' if($listenaddr eq '127.0.0.1');
}
- elsif($ARGV[0] eq "-u") {
- $username=$ARGV[1];
- shift @ARGV;
+ elsif($ARGV[0] eq '--addr') {
+ if($ARGV[1]) {
+ my $tmpstr = $ARGV[1];
+ if($tmpstr =~ /^(\d\d?\d?)\.(\d\d?\d?)\.(\d\d?\d?)\.(\d\d?\d?)$/) {
+ $listenaddr = "$1.$2.$3.$4" if($ipvnum == 4);
+ shift @ARGV;
+ }
+ elsif($ipvnum == 6) {
+ $listenaddr = $tmpstr;
+ $listenaddr =~ s/^\[(.*)\]$/$1/;
+ shift @ARGV;
+ }
+ }
}
- elsif($ARGV[0] eq "-l") {
- $listenaddr=$ARGV[1];
- shift @ARGV;
+ elsif($ARGV[0] eq '--pidfile') {
+ if($ARGV[1]) {
+ $pidfile = "$path/". $ARGV[1];
+ shift @ARGV;
+ }
}
- elsif($ARGV[0] =~ /^(\d+)$/) {
- $port = $1;
+ elsif($ARGV[0] eq '--sshport') {
+ if($ARGV[1]) {
+ if($ARGV[1] =~ /^(\d+)$/) {
+ $port = $1;
+ shift @ARGV;
+ }
+ }
+ }
+ elsif($ARGV[0] eq '--socksport') {
+ if($ARGV[1]) {
+ if($ARGV[1] =~ /^(\d+)$/) {
+ $socksport = $1;
+ shift @ARGV;
+ }
+ }
}
-} while(shift @ARGV);
-
-# Searching for sshd and sftp-server will be done first
-# in the PATH and afterwards in other common locations.
-my @spath;
-push(@spath, File::Spec->path());
-push(@spath, @sftppath);
-
-# sshd insists on being called with an absolute path.
-my $sshd = searchpath("sshd", @spath);
-if (!$sshd) {
- print "sshd$exeext not found\n";
+ else {
+ print STDERR "\nWarning: sshserver.pl unknown parameter: $ARGV[0]\n";
+ }
+ shift @ARGV;
+}
+
+
+#***************************************************************************
+# Default ssh daemon pid file name
+#
+if(!$pidfile) {
+ $pidfile = "$path/". server_pidfilename($proto, $ipvnum, $idnum);
+}
+
+
+#***************************************************************************
+# ssh, socks and sftp server log file names
+#
+$sshdlog = server_logfilename($logdir, 'ssh', $ipvnum, $idnum);
+$sftplog = server_logfilename($logdir, 'sftp', $ipvnum, $idnum);
+$sshlog = server_logfilename($logdir, 'socks', $ipvnum, $idnum);
+
+
+#***************************************************************************
+# Logging level for ssh server and client
+#
+my $loglevel = $debugprotocol?'DEBUG3':'DEBUG2';
+
+
+#***************************************************************************
+# Validate username
+#
+if(!$username) {
+ $error = 'Will not run ssh server without a user name';
+}
+elsif($username eq 'root') {
+ $error = 'Will not run ssh server as root to mitigate security risks';
+}
+if($error) {
+ logmsg $error;
exit 1;
}
-if ($verbose) {
- print "SSH server found is $sshd\n";
+
+
+#***************************************************************************
+# Find out ssh daemon canonical file name
+#
+my $sshd = find_sshd();
+if(!$sshd) {
+ logmsg "cannot find $sshdexe";
+ exit 1;
}
-my $sftp = searchpath("sftp-server", @spath);
-if (!$sftp) {
- print "Could not find sftp-server$exeext plugin\n";
+
+#***************************************************************************
+# Find out ssh daemon version info
+#
+my ($sshdid, $sshdvernum, $sshdverstr, $sshderror) = sshversioninfo($sshd);
+if(!$sshdid) {
+ # Not an OpenSSH or SunSSH ssh daemon
+ logmsg $sshderror if($verbose);
+ logmsg 'SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later';
+ exit 1;
+}
+logmsg "ssh server found $sshd is $sshdverstr" if($verbose);
+
+
+#***************************************************************************
+# ssh daemon command line options we might use and version support
+#
+# -e: log stderr : OpenSSH 2.9.0 and later
+# -f: sshd config file : OpenSSH 1.2.1 and later
+# -D: no daemon forking : OpenSSH 2.5.0 and later
+# -o: command-line option : OpenSSH 3.1.0 and later
+# -t: test config file : OpenSSH 2.9.9 and later
+# -?: sshd version info : OpenSSH 1.2.1 and later
+#
+# -e: log stderr : SunSSH 1.0.0 and later
+# -f: sshd config file : SunSSH 1.0.0 and later
+# -D: no daemon forking : SunSSH 1.0.0 and later
+# -o: command-line option : SunSSH 1.0.0 and later
+# -t: test config file : SunSSH 1.0.0 and later
+# -?: sshd version info : SunSSH 1.0.0 and later
+
+
+#***************************************************************************
+# Verify minimum ssh daemon version
+#
+if((($sshdid =~ /OpenSSH/) && ($sshdvernum < 299)) ||
+ (($sshdid =~ /SunSSH/) && ($sshdvernum < 100))) {
+ logmsg 'SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later';
exit 1;
}
-if ($verbose) {
- print "SFTP server plugin found is $sftp\n";
+
+
+#***************************************************************************
+# Find out sftp server plugin canonical file name
+#
+my $sftpsrv = find_sftpsrv();
+if(!$sftpsrv) {
+ logmsg "cannot find $sftpsrvexe";
+ exit 1;
}
+logmsg "sftp server plugin found $sftpsrv" if($verbose);
+
-if ($username eq "root") {
- print "Will not run ssh daemon as root to mitigate security risks\n";
+#***************************************************************************
+# Find out sftp client canonical file name
+#
+my $sftp = find_sftp();
+if(!$sftp) {
+ logmsg "cannot find $sftpexe";
exit 1;
}
+logmsg "sftp client found $sftp" if($verbose);
-# Find out sshd version.
-my $tmpstr;
-my $ssh_daemon;
-my $ssh_ver_major;
-my $ssh_ver_minor;
-my $ssh_ver_patch;
-my $ssh_version;
-foreach $tmpstr (qx($sshd -V 2>&1)) {
- if($tmpstr =~ /OpenSSH[_-](\d+)\.(\d+)(\.(\d+))*/i) {
- ($ssh_ver_major, $ssh_ver_minor, $ssh_ver_patch) = ($1, $2, $4);
- $ssh_daemon = 'OpenSSH';
- $ssh_version = 10 * $ssh_ver_major + $ssh_ver_minor;
- if($ssh_version == 36) {
- $showfiles=1;
- }
- last;
+
+#***************************************************************************
+# Find out ssh keygen canonical file name
+#
+my $sshkeygen = find_sshkeygen();
+if(!$sshkeygen) {
+ logmsg "cannot find $sshkeygenexe";
+ exit 1;
+}
+logmsg "ssh keygen found $sshkeygen" if($verbose);
+
+
+#***************************************************************************
+# Find out ssh client canonical file name
+#
+my $ssh = find_ssh();
+if(!$ssh) {
+ logmsg "cannot find $sshexe";
+ exit 1;
+}
+
+
+#***************************************************************************
+# Find out ssh client version info
+#
+my ($sshid, $sshvernum, $sshverstr, $ssherror) = sshversioninfo($ssh);
+if(!$sshid) {
+ # Not an OpenSSH or SunSSH ssh client
+ logmsg $ssherror if($verbose);
+ logmsg 'SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later';
+ exit 1;
+}
+logmsg "ssh client found $ssh is $sshverstr" if($verbose);
+
+
+#***************************************************************************
+# ssh client command line options we might use and version support
+#
+# -D: dynamic app port forwarding : OpenSSH 2.9.9 and later
+# -F: ssh config file : OpenSSH 2.9.9 and later
+# -N: no shell/command : OpenSSH 2.1.0 and later
+# -p: connection port : OpenSSH 1.2.1 and later
+# -v: verbose messages : OpenSSH 1.2.1 and later
+# -vv: increase verbosity : OpenSSH 2.3.0 and later
+# -V: ssh version info : OpenSSH 1.2.1 and later
+#
+# -D: dynamic app port forwarding : SunSSH 1.0.0 and later
+# -F: ssh config file : SunSSH 1.0.0 and later
+# -N: no shell/command : SunSSH 1.0.0 and later
+# -p: connection port : SunSSH 1.0.0 and later
+# -v: verbose messages : SunSSH 1.0.0 and later
+# -vv: increase verbosity : SunSSH 1.0.0 and later
+# -V: ssh version info : SunSSH 1.0.0 and later
+
+
+#***************************************************************************
+# Verify minimum ssh client version
+#
+if((($sshid =~ /OpenSSH/) && ($sshvernum < 299)) ||
+ (($sshid =~ /SunSSH/) && ($sshvernum < 100))) {
+ logmsg 'SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later';
+ exit 1;
+}
+
+
+#***************************************************************************
+# ssh keygen command line options we actually use and version support
+#
+# -C: identity comment : OpenSSH 1.2.1 and later
+# -f: key filename : OpenSSH 1.2.1 and later
+# -N: new passphrase : OpenSSH 1.2.1 and later
+# -q: quiet keygen : OpenSSH 1.2.1 and later
+# -t: key type : OpenSSH 2.5.0 and later
+#
+# -C: identity comment : SunSSH 1.0.0 and later
+# -f: key filename : SunSSH 1.0.0 and later
+# -N: new passphrase : SunSSH 1.0.0 and later
+# -q: quiet keygen : SunSSH 1.0.0 and later
+# -t: key type : SunSSH 1.0.0 and later
+
+
+#***************************************************************************
+# Generate host and client key files for curl's tests
+#
+if((! -e $hstprvkeyf) || (! -s $hstprvkeyf) ||
+ (! -e $hstpubkeyf) || (! -s $hstpubkeyf) ||
+ (! -e $cliprvkeyf) || (! -s $cliprvkeyf) ||
+ (! -e $clipubkeyf) || (! -s $clipubkeyf)) {
+ # Make sure all files are gone so ssh-keygen doesn't complain
+ unlink($hstprvkeyf, $hstpubkeyf, $cliprvkeyf, $clipubkeyf);
+ logmsg 'generating host keys...' if($verbose);
+ if(system "$sshkeygen -q -t dsa -f $hstprvkeyf -C 'curl test server' -N ''") {
+ logmsg 'Could not generate host key';
+ exit 1;
+ }
+ logmsg 'generating client keys...' if($verbose);
+ if(system "$sshkeygen -q -t dsa -f $cliprvkeyf -C 'curl test client' -N ''") {
+ logmsg 'Could not generate client key';
+ exit 1;
+ }
+}
+
+
+#***************************************************************************
+# ssh daemon configuration file options we might use and version support
+#
+# AFSTokenPassing : OpenSSH 1.2.1 and later [1]
+# AcceptEnv : OpenSSH 3.9.0 and later
+# AddressFamily : OpenSSH 4.0.0 and later
+# AllowGroups : OpenSSH 1.2.1 and later
+# AllowTcpForwarding : OpenSSH 2.3.0 and later
+# AllowUsers : OpenSSH 1.2.1 and later
+# AuthorizedKeysFile : OpenSSH 2.9.9 and later
+# AuthorizedKeysFile2 : OpenSSH 2.9.9 and later
+# Banner : OpenSSH 2.5.0 and later
+# ChallengeResponseAuthentication : OpenSSH 2.5.0 and later
+# Ciphers : OpenSSH 2.1.0 and later [3]
+# ClientAliveCountMax : OpenSSH 2.9.0 and later
+# ClientAliveInterval : OpenSSH 2.9.0 and later
+# Compression : OpenSSH 3.3.0 and later
+# DenyGroups : OpenSSH 1.2.1 and later
+# DenyUsers : OpenSSH 1.2.1 and later
+# ForceCommand : OpenSSH 4.4.0 and later [3]
+# GatewayPorts : OpenSSH 2.1.0 and later
+# GSSAPIAuthentication : OpenSSH 3.7.0 and later [1]
+# GSSAPICleanupCredentials : OpenSSH 3.8.0 and later [1]
+# GSSAPIKeyExchange : SunSSH 1.0.0 and later [1]
+# GSSAPIStoreDelegatedCredentials : SunSSH 1.0.0 and later [1]
+# GSSCleanupCreds : SunSSH 1.0.0 and later [1]
+# GSSUseSessionCredCache : SunSSH 1.0.0 and later [1]
+# HostbasedAuthentication : OpenSSH 2.9.0 and later
+# HostbasedUsesNameFromPacketOnly : OpenSSH 2.9.0 and later
+# HostKey : OpenSSH 1.2.1 and later
+# IgnoreRhosts : OpenSSH 1.2.1 and later
+# IgnoreUserKnownHosts : OpenSSH 1.2.1 and later
+# KbdInteractiveAuthentication : OpenSSH 2.3.0 and later
+# KeepAlive : OpenSSH 1.2.1 and later
+# KerberosAuthentication : OpenSSH 1.2.1 and later [1]
+# KerberosGetAFSToken : OpenSSH 3.8.0 and later [1]
+# KerberosOrLocalPasswd : OpenSSH 1.2.1 and later [1]
+# KerberosTgtPassing : OpenSSH 1.2.1 and later [1]
+# KerberosTicketCleanup : OpenSSH 1.2.1 and later [1]
+# KeyRegenerationInterval : OpenSSH 1.2.1 and later
+# ListenAddress : OpenSSH 1.2.1 and later
+# LoginGraceTime : OpenSSH 1.2.1 and later
+# LogLevel : OpenSSH 1.2.1 and later
+# LookupClientHostnames : SunSSH 1.0.0 and later
+# MACs : OpenSSH 2.5.0 and later [3]
+# Match : OpenSSH 4.4.0 and later [3]
+# MaxAuthTries : OpenSSH 3.9.0 and later
+# MaxStartups : OpenSSH 2.2.0 and later
+# PAMAuthenticationViaKbdInt : OpenSSH 2.9.0 and later [2]
+# PasswordAuthentication : OpenSSH 1.2.1 and later
+# PermitEmptyPasswords : OpenSSH 1.2.1 and later
+# PermitOpen : OpenSSH 4.4.0 and later [3]
+# PermitRootLogin : OpenSSH 1.2.1 and later
+# PermitTunnel : OpenSSH 4.3.0 and later
+# PermitUserEnvironment : OpenSSH 3.5.0 and later
+# PidFile : OpenSSH 2.1.0 and later
+# Port : OpenSSH 1.2.1 and later
+# PrintLastLog : OpenSSH 2.9.0 and later
+# PrintMotd : OpenSSH 1.2.1 and later
+# Protocol : OpenSSH 2.1.0 and later
+# PubkeyAuthentication : OpenSSH 2.5.0 and later
+# RhostsAuthentication : OpenSSH 1.2.1 and later
+# RhostsRSAAuthentication : OpenSSH 1.2.1 and later
+# RSAAuthentication : OpenSSH 1.2.1 and later
+# ServerKeyBits : OpenSSH 1.2.1 and later
+# SkeyAuthentication : OpenSSH 1.2.1 and later [1]
+# StrictModes : OpenSSH 1.2.1 and later
+# Subsystem : OpenSSH 2.2.0 and later
+# SyslogFacility : OpenSSH 1.2.1 and later
+# TCPKeepAlive : OpenSSH 3.8.0 and later
+# UseDNS : OpenSSH 3.7.0 and later
+# UseLogin : OpenSSH 1.2.1 and later
+# UsePAM : OpenSSH 3.7.0 and later [1][2]
+# UsePrivilegeSeparation : OpenSSH 3.2.2 and later
+# VerifyReverseMapping : OpenSSH 3.1.0 and later
+# X11DisplayOffset : OpenSSH 1.2.1 and later [3]
+# X11Forwarding : OpenSSH 1.2.1 and later
+# X11UseLocalhost : OpenSSH 3.1.0 and later
+# XAuthLocation : OpenSSH 2.1.1 and later [3]
+#
+# [1] Option only available if activated at compile time
+# [2] Option specific for portable versions
+# [3] Option not used in our ssh server config file
+
+
+#***************************************************************************
+# Initialize sshd config with options actually supported in OpenSSH 2.9.9
+#
+logmsg 'generating ssh server config file...' if($verbose);
+@cfgarr = ();
+push @cfgarr, '# This is a generated file. Do not edit.';
+push @cfgarr, "# $sshdverstr sshd configuration file for curl testing";
+push @cfgarr, '#';
+push @cfgarr, "DenyUsers !$username";
+push @cfgarr, "AllowUsers $username";
+push @cfgarr, 'DenyGroups';
+push @cfgarr, 'AllowGroups';
+push @cfgarr, '#';
+push @cfgarr, "AuthorizedKeysFile $path/$clipubkeyf";
+push @cfgarr, "AuthorizedKeysFile2 $path/$clipubkeyf";
+push @cfgarr, "HostKey $path/$hstprvkeyf";
+push @cfgarr, "PidFile $pidfile";
+push @cfgarr, '#';
+push @cfgarr, "Port $port";
+push @cfgarr, "ListenAddress $listenaddr";
+push @cfgarr, 'Protocol 2';
+push @cfgarr, '#';
+push @cfgarr, 'AllowTcpForwarding yes';
+push @cfgarr, 'Banner none';
+push @cfgarr, 'ChallengeResponseAuthentication no';
+push @cfgarr, 'ClientAliveCountMax 3';
+push @cfgarr, 'ClientAliveInterval 0';
+push @cfgarr, 'GatewayPorts no';
+push @cfgarr, 'HostbasedAuthentication no';
+push @cfgarr, 'HostbasedUsesNameFromPacketOnly no';
+push @cfgarr, 'IgnoreRhosts yes';
+push @cfgarr, 'IgnoreUserKnownHosts yes';
+push @cfgarr, 'KeyRegenerationInterval 0';
+push @cfgarr, 'LoginGraceTime 30';
+push @cfgarr, "LogLevel $loglevel";
+push @cfgarr, 'MaxStartups 5';
+push @cfgarr, 'PasswordAuthentication no';
+push @cfgarr, 'PermitEmptyPasswords no';
+push @cfgarr, 'PermitRootLogin no';
+push @cfgarr, 'PrintLastLog no';
+push @cfgarr, 'PrintMotd no';
+push @cfgarr, 'PubkeyAuthentication yes';
+push @cfgarr, 'RhostsRSAAuthentication no';
+push @cfgarr, 'RSAAuthentication no';
+push @cfgarr, 'ServerKeyBits 768';
+push @cfgarr, 'StrictModes no';
+push @cfgarr, "Subsystem sftp $sftpsrv";
+push @cfgarr, 'SyslogFacility AUTH';
+push @cfgarr, 'UseLogin no';
+push @cfgarr, 'X11Forwarding no';
+push @cfgarr, '#';
+
+
+#***************************************************************************
+# Write out initial sshd configuration file for curl's tests
+#
+$error = dump_array($sshdconfig, @cfgarr);
+if($error) {
+ logmsg $error;
+ exit 1;
+}
+
+
+#***************************************************************************
+# Verifies at run time if sshd supports a given configuration file option
+#
+sub sshd_supports_opt {
+ my ($option, $value) = @_;
+ my $err;
+ #
+ if((($sshdid =~ /OpenSSH/) && ($sshdvernum >= 310)) ||
+ ($sshdid =~ /SunSSH/)) {
+ # ssh daemon supports command line options -t -f and -o
+ $err = grep /((Unsupported)|(Bad configuration)|(Deprecated)) option.*$option/,
+ qx($sshd -t -f $sshdconfig -o $option=$value 2>&1);
+ return !$err;
}
- if($tmpstr =~ /Sun[_-]SSH[_-](\d+)\.(\d+)/i) {
- ($ssh_ver_major, $ssh_ver_minor) = ($1, $2);
- $ssh_daemon = 'SunSSH';
- $ssh_version = 10 * $ssh_ver_major + $ssh_ver_minor;
- if($ssh_version == 11) {
- $showfiles=1;
+ if(($sshdid =~ /OpenSSH/) && ($sshdvernum >= 299)) {
+ # ssh daemon supports command line options -t and -f
+ $err = dump_array($sshdconfig, (@cfgarr, "$option $value"));
+ if($err) {
+ logmsg $err;
+ return 0;
}
- last;
+ $err = grep /((Unsupported)|(Bad configuration)|(Deprecated)) option.*$option/,
+ qx($sshd -t -f $sshdconfig 2>&1);
+ unlink $sshdconfig;
+ return !$err;
}
+ return 0;
+}
+
+
+#***************************************************************************
+# Kerberos Authentication support may have not been built into sshd
+#
+if(sshd_supports_opt('KerberosAuthentication','no')) {
+ push @cfgarr, 'KerberosAuthentication no';
+}
+if(sshd_supports_opt('KerberosGetAFSToken','no')) {
+ push @cfgarr, 'KerberosGetAFSToken no';
+}
+if(sshd_supports_opt('KerberosOrLocalPasswd','no')) {
+ push @cfgarr, 'KerberosOrLocalPasswd no';
+}
+if(sshd_supports_opt('KerberosTgtPassing','no')) {
+ push @cfgarr, 'KerberosTgtPassing no';
+}
+if(sshd_supports_opt('KerberosTicketCleanup','yes')) {
+ push @cfgarr, 'KerberosTicketCleanup yes';
+}
+
+
+#***************************************************************************
+# Andrew File System support may have not been built into sshd
+#
+if(sshd_supports_opt('AFSTokenPassing','no')) {
+ push @cfgarr, 'AFSTokenPassing no';
+}
+
+
+#***************************************************************************
+# S/Key authentication support may have not been built into sshd
+#
+if(sshd_supports_opt('SkeyAuthentication','no')) {
+ push @cfgarr, 'SkeyAuthentication no';
+}
+
+
+#***************************************************************************
+# GSSAPI Authentication support may have not been built into sshd
+#
+my $sshd_builtwith_GSSAPI;
+if(sshd_supports_opt('GSSAPIAuthentication','no')) {
+ push @cfgarr, 'GSSAPIAuthentication no';
+ $sshd_builtwith_GSSAPI = 1;
+}
+if(sshd_supports_opt('GSSAPICleanupCredentials','yes')) {
+ push @cfgarr, 'GSSAPICleanupCredentials yes';
+}
+if(sshd_supports_opt('GSSAPIKeyExchange','no')) {
+ push @cfgarr, 'GSSAPIKeyExchange no';
+}
+if(sshd_supports_opt('GSSAPIStoreDelegatedCredentials','no')) {
+ push @cfgarr, 'GSSAPIStoreDelegatedCredentials no';
+}
+if(sshd_supports_opt('GSSCleanupCreds','yes')) {
+ push @cfgarr, 'GSSCleanupCreds yes';
+}
+if(sshd_supports_opt('GSSUseSessionCredCache','no')) {
+ push @cfgarr, 'GSSUseSessionCredCache no';
+}
+push @cfgarr, '#';
+
+
+#***************************************************************************
+# Options that might be supported or not in sshd OpenSSH 2.9.9 and later
+#
+if(sshd_supports_opt('AcceptEnv','')) {
+ push @cfgarr, 'AcceptEnv';
+}
+if(sshd_supports_opt('AddressFamily','any')) {
+ # Address family must be specified before ListenAddress
+ splice @cfgarr, 14, 0, 'AddressFamily any';
+}
+if(sshd_supports_opt('Compression','no')) {
+ push @cfgarr, 'Compression no';
+}
+if(sshd_supports_opt('KbdInteractiveAuthentication','no')) {
+ push @cfgarr, 'KbdInteractiveAuthentication no';
+}
+if(sshd_supports_opt('KeepAlive','no')) {
+ push @cfgarr, 'KeepAlive no';
+}
+if(sshd_supports_opt('LookupClientHostnames','no')) {
+ push @cfgarr, 'LookupClientHostnames no';
+}
+if(sshd_supports_opt('MaxAuthTries','10')) {
+ push @cfgarr, 'MaxAuthTries 10';
+}
+if(sshd_supports_opt('PAMAuthenticationViaKbdInt','no')) {
+ push @cfgarr, 'PAMAuthenticationViaKbdInt no';
+}
+if(sshd_supports_opt('PermitTunnel','no')) {
+ push @cfgarr, 'PermitTunnel no';
+}
+if(sshd_supports_opt('PermitUserEnvironment','no')) {
+ push @cfgarr, 'PermitUserEnvironment no';
+}
+if(sshd_supports_opt('RhostsAuthentication','no')) {
+ push @cfgarr, 'RhostsAuthentication no';
+}
+if(sshd_supports_opt('TCPKeepAlive','no')) {
+ push @cfgarr, 'TCPKeepAlive no';
+}
+if(sshd_supports_opt('UseDNS','no')) {
+ push @cfgarr, 'UseDNS no';
+}
+if(sshd_supports_opt('UsePAM','no')) {
+ push @cfgarr, 'UsePAM no';
}
-# Verify minimum SSH daemon version.
-my $sshd_ver_ok = 1;
-if(!$ssh_daemon) {
- if($verbose) {
- print "unsupported SSH server daemon found\n";
- chomp($tmpstr = qx($sshd -V 2>&1));
- print "$tmpstr\n";
+if($sshdid =~ /OpenSSH/) {
+ # http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6492415
+ if(sshd_supports_opt('UsePrivilegeSeparation','no')) {
+ push @cfgarr, 'UsePrivilegeSeparation no';
}
- $sshd_ver_ok = 0;
}
-elsif(($ssh_daemon =~ /OpenSSH/) && ($ssh_version < 36)) {
- if($verbose) {
- print "sshd found is $ssh_daemon $ssh_ver_major.$ssh_ver_minor\n";
+
+if(sshd_supports_opt('VerifyReverseMapping','no')) {
+ push @cfgarr, 'VerifyReverseMapping no';
+}
+if(sshd_supports_opt('X11UseLocalhost','yes')) {
+ push @cfgarr, 'X11UseLocalhost yes';
+}
+push @cfgarr, '#';
+
+
+#***************************************************************************
+# Write out resulting sshd configuration file for curl's tests
+#
+$error = dump_array($sshdconfig, @cfgarr);
+if($error) {
+ logmsg $error;
+ exit 1;
+}
+
+
+#***************************************************************************
+# Verify that sshd actually supports our generated configuration file
+#
+if(system "$sshd -t -f $sshdconfig > $sshdlog 2>&1") {
+ logmsg "sshd configuration file $sshdconfig failed verification";
+ display_sshdlog();
+ display_sshdconfig();
+ exit 1;
+}
+
+
+#***************************************************************************
+# Generate ssh client host key database file for curl's tests
+#
+if((! -e $knownhosts) || (! -s $knownhosts)) {
+ logmsg 'generating ssh client known hosts file...' if($verbose);
+ unlink($knownhosts);
+ if(open(DSAKEYFILE, "<$hstpubkeyf")) {
+ my @dsahostkey = do { local $/ = ' '; <DSAKEYFILE> };
+ if(close(DSAKEYFILE)) {
+ if(open(KNOWNHOSTS, ">$knownhosts")) {
+ print KNOWNHOSTS "$listenaddr ssh-dss $dsahostkey[1]\n";
+ if(!close(KNOWNHOSTS)) {
+ $error = "Error: cannot close file $knownhosts";
+ }
+ }
+ else {
+ $error = "Error: cannot write file $knownhosts";
+ }
+ }
+ else {
+ $error = "Error: cannot close file $hstpubkeyf";
+ }
+ }
+ else {
+ $error = "Error: cannot read file $hstpubkeyf";
+ }
+ if($error) {
+ logmsg $error;
+ exit 1;
}
- $sshd_ver_ok = 0;
}
-elsif(($ssh_daemon =~ /SunSSH/) && ($ssh_version < 11)) {
- if($verbose) {
- print "sshd found is $ssh_daemon $ssh_ver_major.$ssh_ver_minor\n";
+
+
+#***************************************************************************
+# ssh client configuration file options we might use and version support
+#
+# AddressFamily : OpenSSH 3.7.0 and later
+# BatchMode : OpenSSH 1.2.1 and later
+# BindAddress : OpenSSH 2.9.9 and later
+# ChallengeResponseAuthentication : OpenSSH 2.5.0 and later
+# CheckHostIP : OpenSSH 1.2.1 and later
+# Cipher : OpenSSH 1.2.1 and later [3]
+# Ciphers : OpenSSH 2.1.0 and later [3]
+# ClearAllForwardings : OpenSSH 2.9.9 and later
+# Compression : OpenSSH 1.2.1 and later
+# CompressionLevel : OpenSSH 1.2.1 and later [3]
+# ConnectionAttempts : OpenSSH 1.2.1 and later
+# ConnectTimeout : OpenSSH 3.7.0 and later
+# ControlMaster : OpenSSH 3.9.0 and later
+# ControlPath : OpenSSH 3.9.0 and later
+# DisableBanner : SunSSH 1.2.0 and later
+# DynamicForward : OpenSSH 2.9.0 and later
+# EnableSSHKeysign : OpenSSH 3.6.0 and later
+# EscapeChar : OpenSSH 1.2.1 and later [3]
+# ExitOnForwardFailure : OpenSSH 4.4.0 and later
+# ForwardAgent : OpenSSH 1.2.1 and later
+# ForwardX11 : OpenSSH 1.2.1 and later
+# ForwardX11Trusted : OpenSSH 3.8.0 and later
+# GatewayPorts : OpenSSH 1.2.1 and later
+# GlobalKnownHostsFile : OpenSSH 1.2.1 and later
+# GSSAPIAuthentication : OpenSSH 3.7.0 and later [1]
+# GSSAPIDelegateCredentials : OpenSSH 3.7.0 and later [1]
+# HashKnownHosts : OpenSSH 4.0.0 and later
+# Host : OpenSSH 1.2.1 and later
+# HostbasedAuthentication : OpenSSH 2.9.0 and later
+# HostKeyAlgorithms : OpenSSH 2.9.0 and later [3]
+# HostKeyAlias : OpenSSH 2.5.0 and later [3]
+# HostName : OpenSSH 1.2.1 and later
+# IdentitiesOnly : OpenSSH 3.9.0 and later
+# IdentityFile : OpenSSH 1.2.1 and later
+# IgnoreIfUnknown : SunSSH 1.2.0 and later
+# KeepAlive : OpenSSH 1.2.1 and later
+# KbdInteractiveAuthentication : OpenSSH 2.3.0 and later
+# KbdInteractiveDevices : OpenSSH 2.3.0 and later [3]
+# LocalCommand : OpenSSH 4.3.0 and later [3]
+# LocalForward : OpenSSH 1.2.1 and later [3]
+# LogLevel : OpenSSH 1.2.1 and later
+# MACs : OpenSSH 2.5.0 and later [3]
+# NoHostAuthenticationForLocalhost : OpenSSH 3.0.0 and later
+# NumberOfPasswordPrompts : OpenSSH 1.2.1 and later
+# PasswordAuthentication : OpenSSH 1.2.1 and later
+# PermitLocalCommand : OpenSSH 4.3.0 and later
+# Port : OpenSSH 1.2.1 and later
+# PreferredAuthentications : OpenSSH 2.5.2 and later
+# Protocol : OpenSSH 2.1.0 and later
+# ProxyCommand : OpenSSH 1.2.1 and later [3]
+# PubkeyAuthentication : OpenSSH 2.5.0 and later
+# RekeyLimit : OpenSSH 3.7.0 and later
+# RemoteForward : OpenSSH 1.2.1 and later [3]
+# RhostsRSAAuthentication : OpenSSH 1.2.1 and later
+# RSAAuthentication : OpenSSH 1.2.1 and later
+# SendEnv : OpenSSH 3.9.0 and later
+# ServerAliveCountMax : OpenSSH 3.8.0 and later
+# ServerAliveInterval : OpenSSH 3.8.0 and later
+# SmartcardDevice : OpenSSH 2.9.9 and later [1][3]
+# StrictHostKeyChecking : OpenSSH 1.2.1 and later
+# TCPKeepAlive : OpenSSH 3.8.0 and later
+# Tunnel : OpenSSH 4.3.0 and later
+# TunnelDevice : OpenSSH 4.3.0 and later [3]
+# UsePAM : OpenSSH 3.7.0 and later [1][2][3]
+# UsePrivilegedPort : OpenSSH 1.2.1 and later
+# User : OpenSSH 1.2.1 and later
+# UserKnownHostsFile : OpenSSH 1.2.1 and later
+# VerifyHostKeyDNS : OpenSSH 3.8.0 and later
+# XAuthLocation : OpenSSH 2.1.1 and later [3]
+#
+# [1] Option only available if activated at compile time
+# [2] Option specific for portable versions
+# [3] Option not used in our ssh client config file
+
+
+#***************************************************************************
+# Initialize ssh config with options actually supported in OpenSSH 2.9.9
+#
+logmsg 'generating ssh client config file...' if($verbose);
+@cfgarr = ();
+push @cfgarr, '# This is a generated file. Do not edit.';
+push @cfgarr, "# $sshverstr ssh client configuration file for curl testing";
+push @cfgarr, '#';
+push @cfgarr, 'Host *';
+push @cfgarr, '#';
+push @cfgarr, "Port $port";
+push @cfgarr, "HostName $listenaddr";
+push @cfgarr, "User $username";
+push @cfgarr, 'Protocol 2';
+push @cfgarr, '#';
+push @cfgarr, "BindAddress $listenaddr";
+push @cfgarr, "DynamicForward $socksport";
+push @cfgarr, '#';
+push @cfgarr, "IdentityFile $path/curl_client_key";
+push @cfgarr, "UserKnownHostsFile $path/$knownhosts";
+push @cfgarr, '#';
+push @cfgarr, 'BatchMode yes';
+push @cfgarr, 'ChallengeResponseAuthentication no';
+push @cfgarr, 'CheckHostIP no';
+push @cfgarr, 'ClearAllForwardings no';
+push @cfgarr, 'Compression no';
+push @cfgarr, 'ConnectionAttempts 3';
+push @cfgarr, 'ForwardAgent no';
+push @cfgarr, 'ForwardX11 no';
+push @cfgarr, 'GatewayPorts no';
+push @cfgarr, 'GlobalKnownHostsFile /dev/null';
+push @cfgarr, 'HostbasedAuthentication no';
+push @cfgarr, 'KbdInteractiveAuthentication no';
+push @cfgarr, "LogLevel $loglevel";
+push @cfgarr, 'NumberOfPasswordPrompts 0';
+push @cfgarr, 'PasswordAuthentication no';
+push @cfgarr, 'PreferredAuthentications publickey';
+push @cfgarr, 'PubkeyAuthentication yes';
+push @cfgarr, 'RhostsRSAAuthentication no';
+push @cfgarr, 'RSAAuthentication no';
+
+# Disabled StrictHostKeyChecking since it makes the tests fail on my
+# OpenSSH_6.0p1 on Debian Linux / Daniel
+push @cfgarr, 'StrictHostKeyChecking no';
+push @cfgarr, 'UsePrivilegedPort no';
+push @cfgarr, '#';
+
+
+#***************************************************************************
+# Options supported in ssh client newer than OpenSSH 2.9.9
+#
+
+if(($sshid =~ /OpenSSH/) && ($sshvernum >= 370)) {
+ push @cfgarr, 'AddressFamily any';
+}
+
+if((($sshid =~ /OpenSSH/) && ($sshvernum >= 370)) ||
+ (($sshid =~ /SunSSH/) && ($sshvernum >= 120))) {
+ push @cfgarr, 'ConnectTimeout 30';
+}
+
+if(($sshid =~ /OpenSSH/) && ($sshvernum >= 390)) {
+ push @cfgarr, 'ControlMaster no';
+}
+
+if(($sshid =~ /OpenSSH/) && ($sshvernum >= 420)) {
+ push @cfgarr, 'ControlPath none';
+}
+
+if(($sshid =~ /SunSSH/) && ($sshvernum >= 120)) {
+ push @cfgarr, 'DisableBanner yes';
+}
+
+if(($sshid =~ /OpenSSH/) && ($sshvernum >= 360)) {
+ push @cfgarr, 'EnableSSHKeysign no';
+}
+
+if(($sshid =~ /OpenSSH/) && ($sshvernum >= 440)) {
+ push @cfgarr, 'ExitOnForwardFailure yes';
+}
+
+if((($sshid =~ /OpenSSH/) && ($sshvernum >= 380)) ||
+ (($sshid =~ /SunSSH/) && ($sshvernum >= 120))) {
+ push @cfgarr, 'ForwardX11Trusted no';
+}
+
+if(($sshd_builtwith_GSSAPI) && ($sshdid eq $sshid) &&
+ ($sshdvernum == $sshvernum)) {
+ push @cfgarr, 'GSSAPIAuthentication no';
+ push @cfgarr, 'GSSAPIDelegateCredentials no';
+ if($sshid =~ /SunSSH/) {
+ push @cfgarr, 'GSSAPIKeyExchange no';
}
- $sshd_ver_ok = 0;
}
-if(!$sshd_ver_ok) {
- print "SCP, SFTP and SOCKS tests require OpenSSH 3.7 or later\n";
- exit 1;
+
+if((($sshid =~ /OpenSSH/) && ($sshvernum >= 400)) ||
+ (($sshid =~ /SunSSH/) && ($sshvernum >= 120))) {
+ push @cfgarr, 'HashKnownHosts no';
+}
+
+if(($sshid =~ /OpenSSH/) && ($sshvernum >= 390)) {
+ push @cfgarr, 'IdentitiesOnly yes';
+}
+
+if(($sshid =~ /SunSSH/) && ($sshvernum >= 120)) {
+ push @cfgarr, 'IgnoreIfUnknown no';
+}
+
+if((($sshid =~ /OpenSSH/) && ($sshvernum < 380)) ||
+ ($sshid =~ /SunSSH/)) {
+ push @cfgarr, 'KeepAlive no';
+}
+
+if((($sshid =~ /OpenSSH/) && ($sshvernum >= 300)) ||
+ ($sshid =~ /SunSSH/)) {
+ push @cfgarr, 'NoHostAuthenticationForLocalhost no';
+}
+
+if(($sshid =~ /OpenSSH/) && ($sshvernum >= 430)) {
+ push @cfgarr, 'PermitLocalCommand no';
+}
+
+if((($sshid =~ /OpenSSH/) && ($sshvernum >= 370)) ||
+ (($sshid =~ /SunSSH/) && ($sshvernum >= 120))) {
+ push @cfgarr, 'RekeyLimit 1G';
+}
+
+if(($sshid =~ /OpenSSH/) && ($sshvernum >= 390)) {
+ push @cfgarr, 'SendEnv';
}
-# Initialize sshd configuration file for curl's tests.
-open(CONF, ">$conffile") || die "Could not write $conffile";
-print CONF "# This is a generated file! Do not edit!\n";
-print CONF "# $ssh_daemon $ssh_ver_major.$ssh_ver_minor sshd configuration file for curl testing\n";
-close CONF;
+if((($sshid =~ /OpenSSH/) && ($sshvernum >= 380)) ||
+ (($sshid =~ /SunSSH/) && ($sshvernum >= 120))) {
+ push @cfgarr, 'ServerAliveCountMax 3';
+ push @cfgarr, 'ServerAliveInterval 0';
+}
-# Support for some options might have not been built into sshd. On some
-# platforms specifying an unsupported option prevents sshd from starting.
-# Check here for possible unsupported options, avoiding its use in sshd.
-sub sshd_supports_opt($) {
- my ($option) = @_;
- my $err = grep /((Unsupported)|(Bad configuration)|(Deprecated)) option.*$option/,
- qx($sshd -t -f $conffile -o $option=no 2>&1);
- return !$err;
+if(($sshid =~ /OpenSSH/) && ($sshvernum >= 380)) {
+ push @cfgarr, 'TCPKeepAlive no';
+}
+
+if(($sshid =~ /OpenSSH/) && ($sshvernum >= 430)) {
+ push @cfgarr, 'Tunnel no';
+}
+
+if(($sshid =~ /OpenSSH/) && ($sshvernum >= 380)) {
+ push @cfgarr, 'VerifyHostKeyDNS no';
+}
+
+push @cfgarr, '#';
+
+
+#***************************************************************************
+# Write out resulting ssh client configuration file for curl's tests
+#
+$error = dump_array($sshconfig, @cfgarr);
+if($error) {
+ logmsg $error;
+ exit 1;
}
-my $supports_UsePAM = sshd_supports_opt('UsePAM');
-my $supports_UseDNS = sshd_supports_opt('UseDNS');
-my $supports_ChReAu = sshd_supports_opt('ChallengeResponseAuthentication');
-if (! -e "curl_client_key.pub") {
- if ($verbose) {
- print "Generating host and client keys...\n";
+#***************************************************************************
+# Initialize client sftp config with options actually supported.
+#
+logmsg 'generating sftp client config file...' if($verbose);
+splice @cfgarr, 1, 1, "# $sshverstr sftp client configuration file for curl testing";
+#
+for(my $i = scalar(@cfgarr) - 1; $i > 0; $i--) {
+ if($cfgarr[$i] =~ /^DynamicForward/) {
+ splice @cfgarr, $i, 1;
+ next;
}
- # Make sure all files are gone so ssh-keygen doesn't complain
- unlink("curl_host_dsa_key", "curl_client_key","curl_host_dsa_key.pub", "curl_client_key.pub");
- system "ssh-keygen -q -t dsa -f curl_host_dsa_key -C 'curl test server' -N ''" and die "Could not generate host key";
- system "ssh-keygen -q -t dsa -f curl_client_key -C 'curl test client' -N ''" and die "Could not generate client key";
-}
-
-open(FILE, ">>$conffile") || die "Could not write $conffile";
-print FILE <<EOFSSHD
-AllowUsers $username
-DenyUsers
-DenyGroups
-AuthorizedKeysFile $path/curl_client_key.pub
-HostKey $path/curl_host_dsa_key
-PidFile $path/.ssh.pid
-Port $port
-ListenAddress $listenaddr
-Protocol 2
-AllowTcpForwarding yes
-GatewayPorts no
-HostbasedAuthentication no
-IgnoreRhosts yes
-IgnoreUserKnownHosts yes
-KeepAlive no
-PasswordAuthentication no
-PermitEmptyPasswords no
-PermitUserEnvironment no
-PermitRootLogin no
-PrintLastLog no
-PrintMotd no
-StrictModes no
-Subsystem sftp $sftp
-UseLogin no
-PrintLastLog no
-X11Forwarding no
-UsePrivilegeSeparation no
-# Newer OpenSSH options
-EOFSSHD
-;
-close FILE || die "Could not close $conffile";
-
-if ($supports_UsePAM) {
- set_sshd_option('UsePAM no');
-}
-if ($supports_UseDNS) {
- set_sshd_option('UseDNS no');
-}
-if ($supports_ChReAu) {
- set_sshd_option('ChallengeResponseAuthentication no');
-}
-
-
-# Now, set up some configuration files for the ssh client
-open(DSAKEYFILE, "<curl_host_dsa_key.pub") || die 'Could not read curl_host_dsa_key.pub';
-my @dsahostkey = do { local $/ = ' '; <DSAKEYFILE> };
-close DSAKEYFILE || die "Could not close DSAKEYFILE";
-
-open(KNOWNHOSTS, ">$knownhostsfile") || die "Could not write $knownhostsfile";
-print KNOWNHOSTS "[$listenaddr]:$port ssh-dss $dsahostkey[1]\n" || die 'Could not write to KNOWNHOSTS';
-close KNOWNHOSTS || die "Could not close KNOWNHOSTS";
-
-open(SSHFILE, ">$conffile_ssh") || die "Could not write $conffile_ssh";
-print SSHFILE <<EOFSSH
-IdentityFile $path/curl_client_key
-UserKnownHostsFile $path/$knownhostsfile
-StrictHostKeyChecking no
-Protocol 2
-BatchMode yes
-CheckHostIP no
-Compression no
-ForwardX11 no
-GatewayPorts no
-HostbasedAuthentication yes
-NoHostAuthenticationForLocalhost no
-# Newer OpenSSH options
-#SetupTimeOut 20
-EOFSSH
-;
-close SSHFILE || die "Could not close $conffile_ssh";
-
-if(($ssh_daemon =~ /OpenSSH/) && ($ssh_version >= 37)) {
- set_ssh_option('ConnectTimeout 20'); # Supported in OpenSSH 3.7 and later
-}
-
-
-# Verify that sshd supports our configuration file
-if (system "$sshd -t -f $conffile > log/sshd.log 2>&1") {
- print "sshd configuration file failed verification\n";
- displayfile("log/sshd.log");
- displayfile("$conffile");
- unlink "log/sshd.log";
- unlink $conffile;
+ if($cfgarr[$i] =~ /^ClearAllForwardings/) {
+ splice @cfgarr, $i, 1, "ClearAllForwardings yes";
+ next;
+ }
+}
+
+
+#***************************************************************************
+# Write out resulting sftp client configuration file for curl's tests
+#
+$error = dump_array($sftpconfig, @cfgarr);
+if($error) {
+ logmsg $error;
+ exit 1;
+}
+@cfgarr = ();
+
+
+#***************************************************************************
+# Generate client sftp commands batch file for sftp server verification
+#
+logmsg 'generating sftp client commands file...' if($verbose);
+push @cfgarr, 'pwd';
+push @cfgarr, 'quit';
+$error = dump_array($sftpcmds, @cfgarr);
+if($error) {
+ logmsg $error;
exit 1;
}
+@cfgarr = ();
-# Start the server
-my $rc = system "$sshd -e -D -f $conffile > log/sshd.log 2>&1";
+
+#***************************************************************************
+# Start the ssh server daemon without forking it
+#
+logmsg "SCP/SFTP server listening on port $port" if($verbose);
+my $rc = system "$sshd -e -D -f $sshdconfig > $sshdlog 2>&1";
if($rc == -1) {
- print "$sshd failed with: $!\n";
- $showfiles=1;
+ logmsg "$sshd failed with: $!";
}
elsif($rc & 127) {
- printf("$sshd died with signal %d, and %s coredump.\n",
- ($rc & 127), ($rc & 128)?"a":"no");
- $showfiles=1;
+ logmsg sprintf("$sshd died with signal %d, and %s coredump",
+ ($rc & 127), ($rc & 128)?'a':'no');
}
elsif($verbose && ($rc >> 8)) {
- printf("$sshd exited with %d \n", $rc >> 8);
+ logmsg sprintf("$sshd exited with %d", $rc >> 8);
}
-if($showfiles) {
- displayfile("log/sshd.log");
- displayfile("$conffile");
-}
-unlink "log/sshd.log";
-unlink $conffile;
+#***************************************************************************
+# Clean up once the server has stopped
+#
+unlink($hstprvkeyf, $hstpubkeyf, $cliprvkeyf, $clipubkeyf, $knownhosts);
+unlink($sshdconfig, $sshconfig, $sftpconfig);
+
-exit $rc >> 8;
+exit 0;
projects / platform / upstream / curl.git / blobdiff