# | (__| |_| | _ <| |___
# \___|\___/|_| \_\_____|
#
-# Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+# Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# These should be the only variables that might be needed to get edited:
BEGIN {
- @INC=(@INC, $ENV{'srcdir'}, ".");
+ push(@INC, $ENV{'srcdir'}) if(defined $ENV{'srcdir'});
+ push(@INC, ".");
# run time statistics needs Time::HiRes
eval {
no warnings "all";
find_sshd
find_ssh
find_sftp
- find_gnutls_serv
+ find_httptlssrv
sshversioninfo
);
my $base = 8990; # base port number
-my $HTTPPORT; # HTTP server port
-my $HTTP6PORT; # HTTP IPv6 server port
-my $HTTPSPORT; # HTTPS server port
-my $FTPPORT; # FTP server port
-my $FTP2PORT; # FTP server 2 port
-my $FTPSPORT; # FTPS server port
-my $FTP6PORT; # FTP IPv6 server port
-my $TFTPPORT; # TFTP
-my $TFTP6PORT; # TFTP
-my $SSHPORT; # SCP/SFTP
-my $SOCKSPORT; # SOCKS4/5 port
-my $POP3PORT; # POP3
-my $POP36PORT; # POP3 IPv6 server port
-my $IMAPPORT; # IMAP
-my $IMAP6PORT; # IMAP IPv6 server port
-my $SMTPPORT; # SMTP
-my $SMTP6PORT; # SMTP IPv6 server port
-my $RTSPPORT; # RTSP
-my $RTSP6PORT; # RTSP IPv6 server port
-my $GOPHERPORT; # Gopher
-my $GOPHER6PORT; # Gopher IPv6 server port
-my $HTTPTLSSRPPORT; # TLS-SRP HTTP port
+my $HTTPPORT; # HTTP server port
+my $HTTP6PORT; # HTTP IPv6 server port
+my $HTTPSPORT; # HTTPS (stunnel) server port
+my $FTPPORT; # FTP server port
+my $FTP2PORT; # FTP server 2 port
+my $FTPSPORT; # FTPS (stunnel) server port
+my $FTP6PORT; # FTP IPv6 server port
+my $TFTPPORT; # TFTP
+my $TFTP6PORT; # TFTP
+my $SSHPORT; # SCP/SFTP
+my $SOCKSPORT; # SOCKS4/5 port
+my $POP3PORT; # POP3
+my $POP36PORT; # POP3 IPv6 server port
+my $IMAPPORT; # IMAP
+my $IMAP6PORT; # IMAP IPv6 server port
+my $SMTPPORT; # SMTP
+my $SMTP6PORT; # SMTP IPv6 server port
+my $RTSPPORT; # RTSP
+my $RTSP6PORT; # RTSP IPv6 server port
+my $GOPHERPORT; # Gopher
+my $GOPHER6PORT; # Gopher IPv6 server port
+my $HTTPTLSPORT; # HTTP TLS (non-stunnel) server port
+my $HTTPTLS6PORT; # HTTP TLS (non-stunnel) IPv6 server port
+my $HTTPPROXYPORT; # HTTP proxy port, when using CONNECT
+my $HTTPPIPEPORT; # HTTP pipelining port
my $srcdir = $ENV{'srcdir'} || '.';
my $CURL="../src/curl".exe_ext(); # what curl executable to run on the tests
my $TESTDIR="$srcdir/data";
my $LIBDIR="./libtest";
my $UNITDIR="./unit";
+# TODO: change this to use server_inputfilename()
my $SERVERIN="$LOGDIR/server.input"; # what curl sent the server
my $SERVER2IN="$LOGDIR/server2.input"; # what curl sent the second server
+my $PROXYIN="$LOGDIR/proxy.input"; # what curl sent the proxy
my $CURLLOG="$LOGDIR/curl.log"; # all command lines run
my $FTPDCMD="$LOGDIR/ftpserver.cmd"; # copy ftp server instructions here
my $SERVERLOGS_LOCK="$LOGDIR/serverlogs.lock"; # server logs advisor read lock
my $perl="perl -I$srcdir";
my $server_response_maxtime=13;
-my $debug_build=0; # curl built with --enable-debug
-my $curl_debug=0; # curl built with --enable-curldebug (memory tracking)
+my $debug_build=0; # built debug enabled (--enable-debug)
+my $has_memory_tracking=0; # built with memory tracking (--enable-curldebug)
my $libtool;
# name of the file that the memory debugging creates:
my $pwd = getcwd(); # current working directory
my $start;
-my $forkserver=0;
my $ftpchecktime=1; # time it took to verify our test FTP server
-my $stunnel = checkcmd("stunnel4") || checkcmd("stunnel");
+my $stunnel = checkcmd("stunnel4") || checkcmd("tstunnel") || checkcmd("stunnel");
my $valgrind = checktestcmd("valgrind");
my $valgrind_logfile="--logfile";
my $valgrind_tool;
my $gdb = checktestcmd("gdb");
+my $httptlssrv = find_httptlssrv();
my $ssl_version; # set if libcurl is built with SSL support
my $large_file; # set if libcurl is built with large file support
my $has_libz; # set if libcurl is built with libz support
my $has_getrlimit; # set if system has getrlimit()
my $has_ntlm; # set if libcurl is built with NTLM support
-my $has_ntlm_sso; # set if libcurl is built with NTLM single-sign-on support
+my $has_ntlm_wb; # set if libcurl is built with NTLM delegation to winbind
+my $has_sspi; # set if libcurl is built with SSPI support
my $has_charconv;# set if libcurl is built with CharConv support
my $has_tls_srp; # set if libcurl is built with TLS-SRP support
+my $has_metalink;# set if curl is built with Metalink support
-my $has_openssl; # built with a lib using an OpenSSL-like API
-my $has_gnutls; # built with GnuTLS
-my $has_nss; # built with NSS
-my $has_yassl; # built with yassl
-my $has_polarssl;# built with polarssl
-my $has_axtls; # built with axTLS
+my $has_openssl; # built with a lib using an OpenSSL-like API
+my $has_gnutls; # built with GnuTLS
+my $has_nss; # built with NSS
+my $has_yassl; # built with yassl
+my $has_polarssl; # built with polarssl
+my $has_axtls; # built with axTLS
+my $has_winssl; # built with WinSSL (Secure Channel aka Schannel)
+my $has_darwinssl;# build with DarwinSSL (Secure Transport)
-my $has_shared; # built shared
+my $has_shared = "unknown"; # built shared
+
+my $resolver; # string to hold the resolver backend
+my $has_cares; # if built with c-ares
+my $has_threadedres; # if built with threaded resolver
my $ssllib; # name of the lib we use (for human presentation)
my $has_crypto; # set if libcurl is built with cryptographic support
my $has_textaware; # set if running on a system that has a text mode concept
# on files. Windows for example
-my @protocols; # array of supported protocols
+
+my @protocols; # array of lowercase supported protocol servers
my $skipped=0; # number of tests skipped; reported in main loop
my %skipped; # skipped{reason}=counter, reasons for skip
my @teststat; # teststat[testnum]=reason, reasons for skip
my %disabled_keywords; # key words of tests to skip
my %enabled_keywords; # key words of tests to run
-my %disabled; # disabled test cases
+my %disabled; # disabled test cases
my $sshdid; # for socks server, ssh daemon version id
my $sshdvernum; # for socks server, ssh daemon version number
my %oldenv;
#######################################################################
-# variables the command line options may set
+# variables that command line options may set
#
my $short;
+my $automakestyle;
my $verbose;
my $debugprotocol;
my $anyway;
my $gdbthis; # run test case with gdb debugger
+my $gdbxwin; # use windowed gdb when using gdb
my $keepoutfiles; # keep stdout and stderr files after tests
my $listonly; # only list the tests
my $postmortem; # display detailed info about failed tests
+my $run_event_based; # run curl with --test-event to test the event API
my %run; # running server
my %doesntrun; # servers that don't work, identified by pidfile
# enable memory debugging if curl is compiled with it
$ENV{'CURL_MEMDEBUG'} = $memdump;
+$ENV{'CURL_ENTROPY'}="12345678";
+$ENV{'CURL_FORCETIME'}=1; # for debug NTLM magic
$ENV{'HOME'}=$pwd;
sub catch_zap {
# Load serverpidfile hash with pidfile names for all possible servers.
#
sub init_serverpidfile_hash {
- for my $proto (('ftp', 'http', 'imap', 'pop3', 'smtp')) {
+ for my $proto (('ftp', 'http', 'imap', 'pop3', 'smtp', 'http')) {
for my $ssl (('', 's')) {
for my $ipvnum ((4, 6)) {
- for my $idnum ((1, 2)) {
+ for my $idnum ((1, 2, 3)) {
my $serv = servername_id("$proto$ssl", $ipvnum, $idnum);
my $pidf = server_pidfilename("$proto$ssl", $ipvnum, $idnum);
$serverpidfile{$serv} = $pidf;
}
}
}
- for my $proto (('tftp', 'sftp', 'socks', 'ssh', 'rtsp', 'gopher', 'http+tls-srp')) {
+ for my $proto (('tftp', 'sftp', 'socks', 'ssh', 'rtsp', 'gopher', 'httptls')) {
for my $ipvnum ((4, 6)) {
for my $idnum ((1, 2)) {
my $serv = servername_id($proto, $ipvnum, $idnum);
die "error: exec() has returned";
}
- # Ugly hack but ssh client doesn't support pid files
+ # Ugly hack but ssh client and gnutls-serv don't support pid files
if ($fake) {
if(open(OUT, ">$pidfile")) {
print OUT $child . "\n";
if(-f $pidfile && -s $pidfile && open(PID, "<$pidfile")) {
$pid2 = 0 + <PID>;
close(PID);
- if(($pid2 > 0) && kill(0, $pid2)) {
+ if(($pid2 > 0) && pidexists($pid2)) {
# if $pid2 is valid, then make sure this pid is alive, as
# otherwise it is just likely to be the _previous_ pidfile or
# similar!
#
sub runclient {
my ($cmd)=@_;
- return system($cmd);
+ my $ret = system($cmd);
+ print "CMD ($ret): $cmd\n" if($verbose && !$torture);
+ return $ret;
# This is one way to test curl on a remote machine
# my $out = system("ssh $CLIENTIP cd \'$pwd\' \\; \'$cmd\'");
else {
$ret = runclient($testcmd);
}
- #logmsg "$_ Returned " . $ret >> 8 . "\n";
+ #logmsg "$_ Returned " . ($ret >> 8) . "\n";
# Now clear the variable again
delete $ENV{'CURL_MEMLIMIT'} if($ENV{'CURL_MEMLIMIT'});
# verify that it returns a proper error code, doesn't leak memory
# and doesn't core dump
- if($ret & 255) {
+ if(($ret & 255) || ($ret >> 8) >= 128) {
logmsg " system() returned $ret\n";
$fail=1;
}
# All servers relative to the given one must be stopped also
#
my @killservers;
- if($server =~ /^(ftp|http|imap|pop3|smtp)s(.*)$/) {
- # given an ssl server, also kill non-ssl underlying one
+ if($server =~ /^(ftp|http|imap|pop3|smtp|httppipe)s((\d*)(-ipv6|))$/) {
+ # given a stunnel based ssl server, also kill non-ssl underlying one
push @killservers, "${1}${2}";
}
- elsif($server =~ /^(ftp|http|imap|pop3|smtp)(.*)$/) {
- # given a non-ssl server, also kill ssl piggybacking one
+ elsif($server =~ /^(ftp|http|imap|pop3|smtp|httppipe)((\d*)(-ipv6|))$/) {
+ # given a non-ssl server, also kill stunnel based ssl piggybacking one
push @killservers, "${1}s${2}";
}
- elsif($server =~ /^(socks)(.*)$/) {
- # given an socks server, also kill ssh underlying one
+ elsif($server =~ /^(socks)((\d*)(-ipv6|))$/) {
+ # given a socks server, also kill ssh underlying one
push @killservers, "ssh${2}";
}
- elsif($server =~ /^(ssh)(.*)$/) {
- # given an ssh server, also kill socks piggybacking one
+ elsif($server =~ /^(ssh)((\d*)(-ipv6|))$/) {
+ # given a ssh server, also kill socks piggybacking one
push @killservers, "socks${2}";
}
push @killservers, $server;
#
foreach my $server (@killservers) {
if($run{$server}) {
- # we must prepend a space since $pidlist may already contain
- # a pid
+ # we must prepend a space since $pidlist may already contain a pid
$pidlist .= " $run{$server}";
$run{$server} = 0;
}
# Verify that the server that runs on $ip, $port is our server. This also
# implies that we can speak with it, as there might be occasions when the
# server runs fine but we cannot talk to it ("Failed to connect to ::1: Can't
-# assign requested address" #
-
+# assign requested address")
+#
sub verifyhttp {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
my $server = servername_id($proto, $ipvnum, $idnum);
# Verify that the server that runs on $ip, $port is our server. This also
# implies that we can speak with it, as there might be occasions when the
# server runs fine but we cannot talk to it ("Failed to connect to ::1: Can't
-# assign requested address" #
-
+# assign requested address")
+#
sub verifyftp {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
my $server = servername_id($proto, $ipvnum, $idnum);
if($proto eq "ftps") {
$extra .= "--insecure --ftp-ssl-control ";
}
- elsif($proto eq "smtp") {
- # SMTP is a bit different since it requires more options and it
- # has _no_ output!
- $extra .= "--mail-rcpt verifiedserver ";
- $extra .= "--mail-from fake ";
- $extra .= "--upload /dev/null ";
- $extra .= "--stderr - "; # move stderr to parse the verbose stuff
- }
my $flags = "--max-time $server_response_maxtime ";
$flags .= "--silent ";
# Verify that the server that runs on $ip, $port is our server. This also
# implies that we can speak with it, as there might be occasions when the
# server runs fine but we cannot talk to it ("Failed to connect to ::1: Can't
-# assign requested address" #
-
+# assign requested address")
+#
sub verifyrtsp {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
my $server = servername_id($proto, $ipvnum, $idnum);
# Verify that the ssh server has written out its pidfile, recovering
# the pid from the file and returning it if a process with that pid is
# actually alive.
-
+#
sub verifyssh {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
my $server = servername_id($proto, $ipvnum, $idnum);
if($pid > 0) {
# if we have a pid it is actually our ssh server,
# since runsshserver() unlinks previous pidfile
- if(!kill(0, $pid)) {
+ if(!pidexists($pid)) {
logmsg "RUN: SSH server has died after starting up\n";
checkdied($pid);
unlink($pidfile);
#######################################################################
# Verify that we can connect to the sftp server, properly authenticate
# with generated config and key files and run a simple remote pwd.
-
+#
sub verifysftp {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
my $server = servername_id($proto, $ipvnum, $idnum);
}
#######################################################################
-# Verify that the TLS-SRP HTTP server that runs on $ip, $port is our server.
-# This also implies that we can speak with it, as there might be occasions when
-# the server runs fine but we cannot talk to it ("Failed to connect to ::1:
-# Can't assign requested address" #
-
-sub verifyhttptlssrp {
+# Verify that the non-stunnel HTTP TLS extensions capable server that runs
+# on $ip, $port is our server. This also implies that we can speak with it,
+# as there might be occasions when the server runs fine but we cannot talk
+# to it ("Failed to connect to ::1: Can't assign requested address")
+#
+sub verifyhttptls {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
my $server = servername_id($proto, $ipvnum, $idnum);
my $pidfile = server_pidfilename($proto, $ipvnum, $idnum);
my $pid = 0;
- my $bonus="";
my $verifyout = "$LOGDIR/".
servername_canon($proto, $ipvnum, $idnum) .'_verify.out';
$flags .= "--verbose ";
$flags .= "--globoff ";
$flags .= "--insecure ";
- $flags .= "--tlsauthtype SRP --tlsuser jsmith --tlspassword abc ";
+ $flags .= "--tlsauthtype SRP ";
+ $flags .= "--tlsuser jsmith ";
+ $flags .= "--tlspassword abc ";
$flags .= "\"https://$ip:$port/verifiedserver\"";
my $cmd = "$VCURL $flags 2>$verifylog";
close(FILE);
}
- if($data && ($data =~ /GNUTLS/) && open(FILE, "<$pidfile")) {
+ if($data && ($data =~ /(GNUTLS|GnuTLS)/) && open(FILE, "<$pidfile")) {
$pid=0+<FILE>;
close(FILE);
+ if($pid > 0) {
+ # if we have a pid it is actually our httptls server,
+ # since runhttptlsserver() unlinks previous pidfile
+ if(!pidexists($pid)) {
+ logmsg "RUN: $server server has died after starting up\n";
+ checkdied($pid);
+ unlink($pidfile);
+ $pid = -1;
+ }
+ }
return $pid;
}
elsif($res == 6) {
#######################################################################
# STUB for verifying socks
-
+#
sub verifysocks {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
my $server = servername_id($proto, $ipvnum, $idnum);
if($pid > 0) {
# if we have a pid it is actually our socks server,
# since runsocksserver() unlinks previous pidfile
- if(!kill(0, $pid)) {
+ if(!pidexists($pid)) {
logmsg "RUN: SOCKS server has died after starting up\n";
checkdied($pid);
unlink($pidfile);
# particular can take a long time to start if it needs to generate
# keys on a slow or loaded host.
#
+# Just for convenience, test harness uses 'https' and 'httptls' literals
+# as values for 'proto' variable in order to differentiate different
+# servers. 'https' literal is used for stunnel based https test servers,
+# and 'httptls' is used for non-stunnel https test servers.
+#
my %protofunc = ('http' => \&verifyhttp,
'https' => \&verifyhttp,
'pop3' => \&verifyftp,
'imap' => \&verifyftp,
'smtp' => \&verifyftp,
+ 'httppipe' => \&verifyhttp,
'ftps' => \&verifyftp,
'tftp' => \&verifyftp,
'ssh' => \&verifyssh,
'socks' => \&verifysocks,
'gopher' => \&verifyhttp,
- 'http+tls-srp' => \&verifyhttptlssrp);
+ 'httptls' => \&verifyhttptls);
sub verifyserver {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
return $pid;
}
+#######################################################################
+# Single shot server responsiveness test. This should only be used
+# to verify that a server present in %run hash is still functional
+#
+sub responsiveserver {
+ my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
+ my $prev_verbose = $verbose;
+
+ $verbose = 0;
+ my $fun = $protofunc{$proto};
+ my $pid = &$fun($proto, $ipvnum, $idnum, $ip, $port);
+ $verbose = $prev_verbose;
+
+ if($pid > 0) {
+ return 1; # responsive
+ }
+ my $srvrname = servername_str($proto, $ipvnum, $idnum);
+ logmsg " server precheck FAILED (unresponsive $srvrname server)\n";
+ return 0;
+}
#######################################################################
# start the http server
#
sub runhttpserver {
- my ($proto, $verbose, $ipv6, $port) = @_;
+ my ($proto, $verbose, $alt, $port) = @_;
my $ip = $HOSTIP;
my $ipvnum = 4;
my $idnum = 1;
my $pidfile;
my $logfile;
my $flags = "";
+ my $exe = "$perl $srcdir/httpserver.pl";
+ my $verbose_flag = "--verbose ";
-
- if($ipv6) {
+ if($alt eq "ipv6") {
# if IPv6, use a different setup
$ipvnum = 6;
$ip = $HOST6IP;
}
+ elsif($alt eq "proxy") {
+ # basically the same, but another ID
+ $idnum = 2;
+ }
+ elsif($alt eq "pipe") {
+ # basically the same, but another ID
+ $idnum = 3;
+ $exe = "python $srcdir/http_pipe.py";
+ $verbose_flag .= "1 ";
+ }
$server = servername_id($proto, $ipvnum, $idnum);
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
- $flags .= "--fork " if($forkserver);
$flags .= "--gopher " if($proto eq "gopher");
- $flags .= "--verbose " if($debugprotocol);
+ $flags .= "--connect $HOSTIP " if($alt eq "proxy");
+ $flags .= $verbose_flag if($debugprotocol);
$flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
$flags .= "--id $idnum " if($idnum > 1);
$flags .= "--ipv$ipvnum --port $port --srcdir \"$srcdir\"";
- my $cmd = "$perl $srcdir/httpserver.pl $flags";
+ my $cmd = "$exe $flags";
+ my ($httppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
+
+ if($httppid <= 0 || !pidexists($httppid)) {
+ # it is NOT alive
+ logmsg "RUN: failed to start the $srvrname server\n";
+ stopserver($server, "$pid2");
+ displaylogs($testnumcheck);
+ $doesntrun{$pidfile} = 1;
+ return (0,0);
+ }
+
+ # Server is up. Verify that we can speak to it.
+ my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
+ if(!$pid3) {
+ logmsg "RUN: $srvrname server failed verification\n";
+ # failed to talk to it properly. Kill the server and return failure
+ stopserver($server, "$httppid $pid2");
+ displaylogs($testnumcheck);
+ $doesntrun{$pidfile} = 1;
+ return (0,0);
+ }
+ $pid2 = $pid3;
+
+ if($verbose) {
+ logmsg "RUN: $srvrname server is now running PID $httppid\n";
+ }
+
+ sleep(1);
+
+ return ($httppid, $pid2);
+}
+
+#######################################################################
+# start the http server
+#
+sub runhttp_pipeserver {
+ my ($proto, $verbose, $alt, $port) = @_;
+ my $ip = $HOSTIP;
+ my $ipvnum = 4;
+ my $idnum = 1;
+ my $server;
+ my $srvrname;
+ my $pidfile;
+ my $logfile;
+ my $flags = "";
+
+ if($alt eq "ipv6") {
+ # No IPv6
+ }
+
+ $server = servername_id($proto, $ipvnum, $idnum);
+
+ $pidfile = $serverpidfile{$server};
+
+ # don't retry if the server doesn't work
+ if ($doesntrun{$pidfile}) {
+ return (0,0);
+ }
+
+ my $pid = processexists($pidfile);
+ if($pid > 0) {
+ stopserver($server, "$pid");
+ }
+ unlink($pidfile) if(-f $pidfile);
+
+ $srvrname = servername_str($proto, $ipvnum, $idnum);
+
+ $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
+
+ $flags .= "--verbose 1 " if($debugprotocol);
+ $flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
+ $flags .= "--id $idnum " if($idnum > 1);
+ $flags .= "--port $port --srcdir \"$srcdir\"";
+
+ my $cmd = "$srcdir/http_pipe.py $flags";
my ($httppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
- if($httppid <= 0 || !kill(0, $httppid)) {
+ if($httppid <= 0 || !pidexists($httppid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
}
#######################################################################
-# start the https server (or rather, tunnel)
+# start the https stunnel based server
#
sub runhttpsserver {
my ($verbose, $ipv6, $certfile) = @_;
my $cmd = "$perl $srcdir/secureserver.pl $flags";
my ($httpspid, $pid2) = startnew($cmd, $pidfile, 15, 0);
- if($httpspid <= 0 || !kill(0, $httpspid)) {
+ if($httpspid <= 0 || !pidexists($httpspid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
}
#######################################################################
-# start the TLS-SRP HTTP server
+# start the non-stunnel HTTP TLS extensions capable server
#
-sub runhttptlssrpserver {
- my ($verbose) = @_;
- my $proto = "http+tls-srp";
- my $ip = $HOSTIP;
- my $port = $HTTPTLSSRPPORT;
- my $ipvnum = 4;
+sub runhttptlsserver {
+ my ($verbose, $ipv6) = @_;
+ my $proto = "httptls";
+ my $port = ($ipv6 && ($ipv6 =~ /6$/)) ? $HTTPTLS6PORT : $HTTPTLSPORT;
+ my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
+ my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
my $idnum = 1;
my $server;
my $srvrname;
my $logfile;
my $flags = "";
+ if(!$httptlssrv) {
+ return (0,0);
+ }
+
$server = servername_id($proto, $ipvnum, $idnum);
$pidfile = $serverpidfile{$server};
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
- $flags .= "--fork " if($forkserver);
$flags .= "--http ";
- $flags .= "-d 1 " if($debugprotocol);
+ $flags .= "--debug 1 " if($debugprotocol);
$flags .= "--port $port ";
- $flags .= "--srppasswd certs/srp-verifier-db --srppasswdconf certs/srp-verifier-conf ";
- $flags .=" >log/gnutls.out 2>&1";
+ $flags .= "--priority NORMAL:+SRP ";
+ $flags .= "--srppasswd $srcdir/certs/srp-verifier-db ";
+ $flags .= "--srppasswdconf $srcdir/certs/srp-verifier-conf";
- # Find gnutls-serv
- my $gnutlsserv = find_gnutls_serv();
- if(!$gnutlsserv) {
- logmsg "RUN: cannot find gnutls-serv\n";
- return (0,0);
- }
- my $cmd = "$gnutlsserv $flags";
- my ($httptlssrppid, $pid2) = startnew($cmd, $pidfile, 1, 1);
+ my $cmd = "$httptlssrv $flags > $logfile 2>&1";
+ my ($httptlspid, $pid2) = startnew($cmd, $pidfile, 10, 1); # fake pidfile
- if($httptlssrppid <= 0 || !kill(0, $httptlssrppid)) {
+ if($httptlspid <= 0 || !pidexists($httptlspid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
return (0,0);
}
- # Server is up. Verify that we can speak to it.
+ # Server is up. Verify that we can speak to it. PID is from fake pidfile
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
if(!$pid3) {
logmsg "RUN: $srvrname server failed verification\n";
# failed to talk to it properly. Kill the server and return failure
- stopserver($server, "$httptlssrppid $pid2");
+ stopserver($server, "$httptlspid $pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return (0,0);
$pid2 = $pid3;
if($verbose) {
- logmsg "RUN: $srvrname server is now running PID $httptlssrppid\n";
+ logmsg "RUN: $srvrname server is now running PID $httptlspid\n";
}
sleep(1);
- return ($httptlssrppid, $pid2);
+ return ($httptlspid, $pid2);
}
#######################################################################
my $cmd = "$perl $srcdir/ftpserver.pl $flags";
my ($ftppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
- if($ftppid <= 0 || !kill(0, $ftppid)) {
+ if($ftppid <= 0 || !pidexists($ftppid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
my $cmd = "$perl $srcdir/secureserver.pl $flags";
my ($ftpspid, $pid2) = startnew($cmd, $pidfile, 15, 0);
- if($ftpspid <= 0 || !kill(0, $ftpspid)) {
+ if($ftpspid <= 0 || !pidexists($ftpspid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
my $cmd = "$perl $srcdir/tftpserver.pl $flags";
my ($tftppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
- if($tftppid <= 0 || !kill(0, $tftppid)) {
+ if($tftppid <= 0 || !pidexists($tftppid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
my $cmd = "$perl $srcdir/rtspserver.pl $flags";
my ($rtsppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
- if($rtsppid <= 0 || !kill(0, $rtsppid)) {
+ if($rtsppid <= 0 || !pidexists($rtsppid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
# passed to startnew, when this happens startnew completes without being
# able to read the pidfile and consequently returns a zero pid2 above.
- if($sshpid <= 0 || !kill(0, $sshpid)) {
+ if($sshpid <= 0 || !pidexists($sshpid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
# start our socks server
my $cmd="$ssh -N -F $sshconfig $ip > $sshlog 2>&1";
- my ($sshpid, $pid2) = startnew($cmd, $pidfile, 30, 1);
+ my ($sshpid, $pid2) = startnew($cmd, $pidfile, 30, 1); # fake pidfile
- if($sshpid <= 0 || !kill(0, $sshpid)) {
+ if($sshpid <= 0 || !pidexists($sshpid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
display_sshlog();
return (0,0);
}
- # Ugly hack but ssh doesn't support pid files
+ # Ugly hack but ssh doesn't support pid files. PID is from fake pidfile.
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
if(!$pid3) {
logmsg "RUN: $srvrname server failed verification\n";
}
#######################################################################
+# Single shot http and gopher server responsiveness test. This should only
+# be used to verify that a server present in %run hash is still functional
+#
+sub responsive_http_server {
+ my ($proto, $verbose, $alt, $port) = @_;
+ my $ip = $HOSTIP;
+ my $ipvnum = 4;
+ my $idnum = 1;
+
+ if($alt eq "ipv6") {
+ # if IPv6, use a different setup
+ $ipvnum = 6;
+ $ip = $HOST6IP;
+ }
+ elsif($alt eq "proxy") {
+ $idnum = 2;
+ }
+
+ return &responsiveserver($proto, $ipvnum, $idnum, $ip, $port);
+}
+
+#######################################################################
+# Single shot pingpong server responsiveness test. This should only be
+# used to verify that a server present in %run hash is still functional
+#
+sub responsive_pingpong_server {
+ my ($proto, $id, $verbose, $ipv6) = @_;
+ my $port;
+ my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
+ my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
+ my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
+
+ if($proto eq "ftp") {
+ $port = ($idnum>1)?$FTP2PORT:$FTPPORT;
+
+ if($ipvnum==6) {
+ # if IPv6, use a different setup
+ $port = $FTP6PORT;
+ }
+ }
+ elsif($proto eq "pop3") {
+ $port = ($ipvnum==6) ? $POP36PORT : $POP3PORT;
+ }
+ elsif($proto eq "imap") {
+ $port = ($ipvnum==6) ? $IMAP6PORT : $IMAPPORT;
+ }
+ elsif($proto eq "smtp") {
+ $port = ($ipvnum==6) ? $SMTP6PORT : $SMTPPORT;
+ }
+ else {
+ print STDERR "Unsupported protocol $proto!!\n";
+ return 0;
+ }
+
+ return &responsiveserver($proto, $ipvnum, $idnum, $ip, $port);
+}
+
+#######################################################################
+# Single shot rtsp server responsiveness test. This should only be
+# used to verify that a server present in %run hash is still functional
+#
+sub responsive_rtsp_server {
+ my ($verbose, $ipv6) = @_;
+ my $port = $RTSPPORT;
+ my $ip = $HOSTIP;
+ my $proto = 'rtsp';
+ my $ipvnum = 4;
+ my $idnum = 1;
+
+ if($ipv6) {
+ # if IPv6, use a different setup
+ $ipvnum = 6;
+ $port = $RTSP6PORT;
+ $ip = $HOST6IP;
+ }
+
+ return &responsiveserver($proto, $ipvnum, $idnum, $ip, $port);
+}
+
+#######################################################################
+# Single shot tftp server responsiveness test. This should only be
+# used to verify that a server present in %run hash is still functional
+#
+sub responsive_tftp_server {
+ my ($id, $verbose, $ipv6) = @_;
+ my $port = $TFTPPORT;
+ my $ip = $HOSTIP;
+ my $proto = 'tftp';
+ my $ipvnum = 4;
+ my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
+
+ if($ipv6) {
+ # if IPv6, use a different setup
+ $ipvnum = 6;
+ $port = $TFTP6PORT;
+ $ip = $HOST6IP;
+ }
+
+ return &responsiveserver($proto, $ipvnum, $idnum, $ip, $port);
+}
+
+#######################################################################
+# Single shot non-stunnel HTTP TLS extensions capable server
+# responsiveness test. This should only be used to verify that a
+# server present in %run hash is still functional
+#
+sub responsive_httptls_server {
+ my ($verbose, $ipv6) = @_;
+ my $proto = "httptls";
+ my $port = ($ipv6 && ($ipv6 =~ /6$/)) ? $HTTPTLS6PORT : $HTTPTLSPORT;
+ my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
+ my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
+ my $idnum = 1;
+
+ return &responsiveserver($proto, $ipvnum, $idnum, $ip, $port);
+}
+
+#######################################################################
# Remove all files in the specified directory
#
sub cleardir {
# compare test results with the expected output, we might filter off
# some pattern that is allowed to differ, output test results
#
-
sub compare {
# filter off patterns _before_ this comparison!
- my ($subject, $firstref, $secondref)=@_;
+ my ($testnum, $testname, $subject, $firstref, $secondref)=@_;
my $result = compareparts($firstref, $secondref);
if($result) {
+ # timestamp test result verification end
+ $timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
+
if(!$short) {
- logmsg "\n $subject FAILED:\n";
+ logmsg "\n $testnum: $subject FAILED:\n";
logmsg showdiff($LOGDIR, $firstref, $secondref);
}
- else {
+ elsif(!$automakestyle) {
logmsg "FAILED\n";
}
+ else {
+ # automakestyle
+ logmsg "FAIL: $testnum - $testname - $subject\n";
+ }
}
return $result;
}
@version = <VERSOUT>;
close(VERSOUT);
+ $resolver="stock";
for(@version) {
chomp;
$libcurl = $2;
if($curl =~ /mingw32/) {
# This is a windows minw32 build, we need to translate the
- # given path to the "actual" windows path.
-
- my @m = `mount`;
- my $matchlen;
- my $bestmatch;
- my $mount;
-
-# example mount output:
-# C:\DOCUME~1\Temp on /tmp type user (binmode,noumount)
-# c:\ActiveState\perl on /perl type user (binmode)
-# C:\msys\1.0\bin on /usr/bin type user (binmode,cygexec,noumount)
-# C:\msys\1.0\bin on /bin type user (binmode,cygexec,noumount)
-
- foreach $mount (@m) {
- if( $mount =~ /(.*) on ([^ ]*) type /) {
- my ($mingw, $real)=($2, $1);
- if($pwd =~ /^$mingw/) {
- # the path we got from pwd starts with the path
- # we found on this line in the mount output
-
- my $len = length($real);
- if($len > $matchlen) {
- # we remember the match that is the longest
- $matchlen = $len;
- $bestmatch = $real;
- }
- }
- }
- }
- if(!$matchlen) {
- logmsg "Serious error, can't find our \"real\" path\n";
- }
- else {
- # now prepend the prefix from the mount command to build
- # our "actual path"
- $pwd = "$bestmatch$pwd";
- }
- $pwd =~ s#\\#/#g;
+ # given path to the "actual" windows path. The MSYS shell
+ # has a builtin 'pwd -W' command which converts the path.
+ $pwd = `sh -c "echo \$(pwd -W)"`;
+ chomp($pwd);
}
elsif ($curl =~ /win32/) {
# Native Windows builds don't understand the
# through a shell.
chomp($pwd = `cygpath -m $pwd`);
}
+ if ($libcurl =~ /winssl/i) {
+ $has_winssl=1;
+ $ssllib="WinSSL";
+ }
elsif ($libcurl =~ /openssl/i) {
$has_openssl=1;
$ssllib="OpenSSL";
}
elsif ($libcurl =~ /yassl/i) {
$has_yassl=1;
- $has_openssl=1;
$ssllib="yassl";
}
elsif ($libcurl =~ /polarssl/i) {
$has_polarssl=1;
- $has_openssl=1;
$ssllib="polarssl";
- }
- elsif ($libcurl =~ /axtls/i) {
- $has_axtls=1;
- $ssllib="axTLS";
- }
+ }
+ elsif ($libcurl =~ /axtls/i) {
+ $has_axtls=1;
+ $ssllib="axTLS";
+ }
+ elsif ($libcurl =~ /securetransport/i) {
+ $has_darwinssl=1;
+ $ssllib="DarwinSSL";
+ }
+ if ($libcurl =~ /ares/i) {
+ $has_cares=1;
+ $resolver="c-ares";
+ }
}
elsif($_ =~ /^Protocols: (.*)/i) {
# these are the protocols compiled in to this libcurl
- @protocols = split(' ', $1);
+ @protocols = split(' ', lc($1));
# Generate a "proto-ipv6" version of each protocol to match the
# IPv6 <server> name. This works even if IPv6 support isn't
# compiled in because the <features> test will fail.
- push @protocols, map($_ . "-ipv6", @protocols);
+ push @protocols, map($_ . '-ipv6', @protocols);
- # Hack - we need a different, non-stunnel server to test HTTP
- # TLS-SRP, but we don't want to add HTTP+TLS-SRP as a protocol
- # throughout curl
- if ($has_gnutls) {
- push @protocols, ('http+tls-srp');
- }
+ # 'http-proxy' is used in test cases to do CONNECT through
+ push @protocols, 'http-proxy';
+
+ # 'http-pipe' is the special server for testing pipelining
+ push @protocols, 'http-pipe';
# 'none' is used in test cases to mean no server
- push @protocols, ('none');
+ push @protocols, 'none';
}
elsif($_ =~ /^Features: (.*)/i) {
$feat = $1;
if($feat =~ /TrackMemory/i) {
- # curl was built with --enable-curldebug (memory tracking)
- $curl_debug = 1;
+ # built with memory tracking support (--enable-curldebug)
+ $has_memory_tracking = 1;
}
if($feat =~ /debug/i) {
# curl was built with --enable-debug
if($feat =~ /NTLM/i) {
# NTLM enabled
$has_ntlm=1;
+ # Use this as a proxy for any cryptographic authentication
+ $has_crypto=1;
}
- if($feat =~ /NTLM_SSO/i) {
- # NTLM single-sign-on enabled
- $has_ntlm_sso=1;
+ if($feat =~ /NTLM_WB/i) {
+ # NTLM delegation to winbind daemon ntlm_auth helper enabled
+ $has_ntlm_wb=1;
+ }
+ if($feat =~ /SSPI/i) {
+ # SSPI enabled
+ $has_sspi=1;
}
if($feat =~ /CharConv/i) {
# CharConv enabled
# TLS-SRP enabled
$has_tls_srp=1;
}
+ if($feat =~ /Metalink/i) {
+ # Metalink enabled
+ $has_metalink=1;
+ }
+ if($feat =~ /AsynchDNS/i) {
+ if(!$has_cares) {
+ # this means threaded resolver
+ $has_threadedres=1;
+ $resolver="threaded";
+ }
+ }
+ }
+ #
+ # Test harness currently uses a non-stunnel server in order to
+ # run HTTP TLS-SRP tests required when curl is built with https
+ # protocol support and TLS-SRP feature enabled. For convenience
+ # 'httptls' may be included in the test harness protocols array
+ # to differentiate this from classic stunnel based 'https' test
+ # harness server.
+ #
+ if($has_tls_srp) {
+ my $add_httptls;
+ for(@protocols) {
+ if($_ =~ /^https(-ipv6|)$/) {
+ $add_httptls=1;
+ last;
+ }
+ }
+ if($add_httptls && (! grep /^httptls$/, @protocols)) {
+ push @protocols, 'httptls';
+ push @protocols, 'httptls-ipv6';
+ }
}
}
if(!$curl) {
}
}
- if(!$curl_debug && $torture) {
- die "can't run torture tests since curl was not built with curldebug";
+ if(!$has_memory_tracking && $torture) {
+ die "can't run torture tests since curl was built without ".
+ "TrackMemory feature (--enable-curldebug)";
}
$has_shared = `sh $CURLCONFIG --built-shared`;
chomp $has_shared;
- # curl doesn't list cryptographic support separately, so assume it's
- # always available
- $has_crypto=1;
-
my $hostname=join(' ', runclientoutput("hostname"));
my $hosttype=join(' ', runclientoutput("uname -a"));
"* Host: $hostname",
"* System: $hosttype");
+ if($has_memory_tracking && $has_threadedres) {
+ $has_memory_tracking = 0;
+ logmsg("*\n",
+ "*** DISABLES memory tracking when using threaded resolver\n",
+ "*\n");
+ }
+
logmsg sprintf("* Server SSL: %8s", $stunnel?"ON ":"OFF");
logmsg sprintf(" libcurl SSL: %s\n", $ssl_version?"ON ":"OFF");
logmsg sprintf("* debug build: %8s", $debug_build?"ON ":"OFF");
- logmsg sprintf(" track memory: %s\n", $curl_debug?"ON ":"OFF");
+ logmsg sprintf(" track memory: %s\n", $has_memory_tracking?"ON ":"OFF");
logmsg sprintf("* valgrind: %8s", $valgrind?"ON ":"OFF");
logmsg sprintf(" HTTP IPv6 %s\n", $http_ipv6?"ON ":"OFF");
logmsg sprintf("* FTP IPv6 %8s", $ftp_ipv6?"ON ":"OFF");
logmsg sprintf(" Libtool lib: %s\n", $libtool?"ON ":"OFF");
- logmsg sprintf("* Shared build: %s\n", $has_shared);
+ logmsg sprintf("* Shared build: %-3s", $has_shared);
+ logmsg sprintf(" Resolver: %s\n", $resolver);
if($ssl_version) {
logmsg sprintf("* SSL library: %13s\n", $ssllib);
}
logmsg sprintf("IMAP-IPv6/%d ", $IMAP6PORT);
logmsg sprintf("SMTP-IPv6/%d\n", $SMTP6PORT);
}
+ if($httptlssrv) {
+ logmsg sprintf("* HTTPTLS/%d ", $HTTPTLSPORT);
+ if($has_ipv6) {
+ logmsg sprintf("HTTPTLS-IPv6/%d ", $HTTPTLS6PORT);
+ }
+ logmsg "\n";
+ }
+ logmsg sprintf("* HTTP-PIPE/%d \n", $HTTPPIPEPORT);
$has_textaware = ($^O eq 'MSWin32') || ($^O eq 'msys');
#
sub subVariables {
my ($thing) = @_;
- $$thing =~ s/%HOSTIP/$HOSTIP/g;
- $$thing =~ s/%HTTPPORT/$HTTPPORT/g;
- $$thing =~ s/%HOST6IP/$HOST6IP/g;
- $$thing =~ s/%HTTP6PORT/$HTTP6PORT/g;
- $$thing =~ s/%HTTPSPORT/$HTTPSPORT/g;
- $$thing =~ s/%FTPPORT/$FTPPORT/g;
+
+ # ports
+
$$thing =~ s/%FTP6PORT/$FTP6PORT/g;
$$thing =~ s/%FTP2PORT/$FTP2PORT/g;
$$thing =~ s/%FTPSPORT/$FTPSPORT/g;
- $$thing =~ s/%SRCDIR/$srcdir/g;
- $$thing =~ s/%PWD/$pwd/g;
- $$thing =~ s/%TFTPPORT/$TFTPPORT/g;
- $$thing =~ s/%TFTP6PORT/$TFTP6PORT/g;
- $$thing =~ s/%SSHPORT/$SSHPORT/g;
- $$thing =~ s/%SOCKSPORT/$SOCKSPORT/g;
- $$thing =~ s/%POP3PORT/$POP3PORT/g;
- $$thing =~ s/%POP36PORT/$POP36PORT/g;
- $$thing =~ s/%IMAPPORT/$IMAPPORT/g;
+ $$thing =~ s/%FTPPORT/$FTPPORT/g;
+
+ $$thing =~ s/%GOPHER6PORT/$GOPHER6PORT/g;
+ $$thing =~ s/%GOPHERPORT/$GOPHERPORT/g;
+
+ $$thing =~ s/%HTTPTLS6PORT/$HTTPTLS6PORT/g;
+ $$thing =~ s/%HTTPTLSPORT/$HTTPTLSPORT/g;
+ $$thing =~ s/%HTTP6PORT/$HTTP6PORT/g;
+ $$thing =~ s/%HTTPSPORT/$HTTPSPORT/g;
+ $$thing =~ s/%HTTPPORT/$HTTPPORT/g;
+ $$thing =~ s/%HTTPPIPEPORT/$HTTPPIPEPORT/g;
+ $$thing =~ s/%PROXYPORT/$HTTPPROXYPORT/g;
+
$$thing =~ s/%IMAP6PORT/$IMAP6PORT/g;
- $$thing =~ s/%SMTPPORT/$SMTPPORT/g;
+ $$thing =~ s/%IMAPPORT/$IMAPPORT/g;
+
+ $$thing =~ s/%POP36PORT/$POP36PORT/g;
+ $$thing =~ s/%POP3PORT/$POP3PORT/g;
+
+ $$thing =~ s/%RTSP6PORT/$RTSP6PORT/g;
+ $$thing =~ s/%RTSPPORT/$RTSPPORT/g;
+
$$thing =~ s/%SMTP6PORT/$SMTP6PORT/g;
+ $$thing =~ s/%SMTPPORT/$SMTPPORT/g;
+
+ $$thing =~ s/%SOCKSPORT/$SOCKSPORT/g;
+ $$thing =~ s/%SSHPORT/$SSHPORT/g;
+
+ $$thing =~ s/%TFTP6PORT/$TFTP6PORT/g;
+ $$thing =~ s/%TFTPPORT/$TFTPPORT/g;
+
+ # client IP addresses
+
+ $$thing =~ s/%CLIENT6IP/$CLIENT6IP/g;
+ $$thing =~ s/%CLIENTIP/$CLIENTIP/g;
+
+ # server IP addresses
+
+ $$thing =~ s/%HOST6IP/$HOST6IP/g;
+ $$thing =~ s/%HOSTIP/$HOSTIP/g;
+
+ # misc
+
$$thing =~ s/%CURL/$CURL/g;
+ $$thing =~ s/%PWD/$pwd/g;
+ $$thing =~ s/%SRCDIR/$srcdir/g;
$$thing =~ s/%USER/$USER/g;
- $$thing =~ s/%CLIENTIP/$CLIENTIP/g;
- $$thing =~ s/%CLIENT6IP/$CLIENT6IP/g;
- $$thing =~ s/%RTSPPORT/$RTSPPORT/g;
- $$thing =~ s/%RTSP6PORT/$RTSP6PORT/g;
- $$thing =~ s/%GOPHERPORT/$GOPHERPORT/g;
- $$thing =~ s/%GOPHER6PORT/$GOPHER6PORT/g;
- $$thing =~ s/%HTTPTLSSRPPORT/$HTTPTLSSRPPORT/g;
# The purpose of FTPTIME2 and FTPTIME3 is to provide times that can be
# used for time-out tests and that whould work on most hosts as these
# Run a single specified test case
#
sub singletest {
- my ($testnum, $count, $total)=@_;
+ my ($evbased, # 1 means switch on if possible (and "curl" is tested)
+ # returns "not a test" if it can't be used for this test
+ $testnum,
+ $count,
+ $total)=@_;
my @what;
my $why;
@what = getpart("client", "features");
}
+ # We require a feature to be present
for(@what) {
my $f = $_;
$f =~ s/\s//g;
- $feature{$f}=$f; # we require this feature
+ if($f =~ /^([^!].*)$/) {
+ # Store the feature for later
+ $feature{$1} = $1;
- if($f eq "SSL") {
- if($ssl_version) {
- next;
+ if($1 eq "SSL") {
+ if($ssl_version) {
+ next;
+ }
}
- }
- elsif($f eq "OpenSSL") {
- if($has_openssl) {
- next;
+ elsif($1 eq "OpenSSL") {
+ if($has_openssl) {
+ next;
+ }
}
- }
- elsif($f eq "GnuTLS") {
- if($has_gnutls) {
- next;
+ elsif($1 eq "GnuTLS") {
+ if($has_gnutls) {
+ next;
+ }
}
- }
- elsif($f eq "NSS") {
- if($has_nss) {
- next;
+ elsif($1 eq "NSS") {
+ if($has_nss) {
+ next;
+ }
}
- }
- elsif($f eq "axTLS") {
- if($has_axtls) {
- next;
+ elsif($1 eq "axTLS") {
+ if($has_axtls) {
+ next;
+ }
}
- }
- elsif($f eq "unittest") {
- if($debug_build) {
- next;
+ elsif($1 eq "WinSSL") {
+ if($has_winssl) {
+ next;
+ }
}
- }
- elsif($f eq "large_file") {
- if($large_file) {
- next;
+ elsif($1 eq "DarwinSSL") {
+ if($has_darwinssl) {
+ next;
+ }
}
- }
- elsif($f eq "idn") {
- if($has_idn) {
- next;
+ elsif($1 eq "unittest") {
+ if($debug_build) {
+ next;
+ }
}
- }
- elsif($f eq "ipv6") {
- if($has_ipv6) {
- next;
+ elsif($1 eq "debug") {
+ if($debug_build) {
+ next;
+ }
}
- }
- elsif($f eq "libz") {
- if($has_libz) {
- next;
+ elsif($1 eq "TrackMemory") {
+ if($has_memory_tracking) {
+ next;
+ }
}
- }
- elsif($f eq "NTLM") {
- if($has_ntlm) {
- next;
+ elsif($1 eq "large_file") {
+ if($large_file) {
+ next;
+ }
}
- }
- elsif($f eq "NTLM_SSO") {
- if($has_ntlm_sso) {
- next;
+ elsif($1 eq "idn") {
+ if($has_idn) {
+ next;
+ }
}
- }
- elsif($f eq "getrlimit") {
- if($has_getrlimit) {
+ elsif($1 eq "ipv6") {
+ if($has_ipv6) {
+ next;
+ }
+ }
+ elsif($1 eq "libz") {
+ if($has_libz) {
+ next;
+ }
+ }
+ elsif($1 eq "NTLM") {
+ if($has_ntlm) {
+ next;
+ }
+ }
+ elsif($1 eq "NTLM_WB") {
+ if($has_ntlm_wb) {
+ next;
+ }
+ }
+ elsif($1 eq "SSPI") {
+ if($has_sspi) {
+ next;
+ }
+ }
+ elsif($1 eq "getrlimit") {
+ if($has_getrlimit) {
+ next;
+ }
+ }
+ elsif($1 eq "crypto") {
+ if($has_crypto) {
+ next;
+ }
+ }
+ elsif($1 eq "TLS-SRP") {
+ if($has_tls_srp) {
+ next;
+ }
+ }
+ elsif($1 eq "Metalink") {
+ if($has_metalink) {
+ next;
+ }
+ }
+ elsif($1 eq "socks") {
next;
}
- }
- elsif($f eq "crypto") {
- if($has_crypto) {
+ # See if this "feature" is in the list of supported protocols
+ elsif (grep /^\Q$1\E$/i, @protocols) {
next;
}
+
+ $why = "curl lacks $1 support";
+ last;
}
- elsif($f eq "TLS-SRP") {
- if($has_tls_srp) {
+ }
+
+ # We require a feature to not be present
+ if(!$why) {
+ for(@what) {
+ my $f = $_;
+ $f =~ s/\s//g;
+
+ if($f =~ /^!(.*)$/) {
+ if($1 eq "SSL") {
+ if(!$ssl_version) {
+ next;
+ }
+ }
+ elsif($1 eq "OpenSSL") {
+ if(!$has_openssl) {
+ next;
+ }
+ }
+ elsif($1 eq "GnuTLS") {
+ if(!$has_gnutls) {
+ next;
+ }
+ }
+ elsif($1 eq "NSS") {
+ if(!$has_nss) {
+ next;
+ }
+ }
+ elsif($1 eq "axTLS") {
+ if(!$has_axtls) {
+ next;
+ }
+ }
+ elsif($1 eq "WinSSL") {
+ if(!$has_winssl) {
+ next;
+ }
+ }
+ elsif($1 eq "DarwinSSL") {
+ if(!$has_darwinssl) {
+ next;
+ }
+ }
+ elsif($1 eq "TrackMemory") {
+ if(!$has_memory_tracking) {
+ next;
+ }
+ }
+ elsif($1 eq "large_file") {
+ if(!$large_file) {
+ next;
+ }
+ }
+ elsif($1 eq "idn") {
+ if(!$has_idn) {
+ next;
+ }
+ }
+ elsif($1 eq "ipv6") {
+ if(!$has_ipv6) {
+ next;
+ }
+ }
+ elsif($1 eq "libz") {
+ if(!$has_libz) {
+ next;
+ }
+ }
+ elsif($1 eq "NTLM") {
+ if(!$has_ntlm) {
+ next;
+ }
+ }
+ elsif($1 eq "NTLM_WB") {
+ if(!$has_ntlm_wb) {
+ next;
+ }
+ }
+ elsif($1 eq "SSPI") {
+ if(!$has_sspi) {
+ next;
+ }
+ }
+ elsif($1 eq "getrlimit") {
+ if(!$has_getrlimit) {
+ next;
+ }
+ }
+ elsif($1 eq "crypto") {
+ if(!$has_crypto) {
+ next;
+ }
+ }
+ elsif($1 eq "TLS-SRP") {
+ if(!$has_tls_srp) {
+ next;
+ }
+ }
+ elsif($1 eq "Metalink") {
+ if(!$has_metalink) {
+ next;
+ }
+ }
+ else {
+ next;
+ }
+ }
+ else {
next;
}
- }
- elsif($f eq "socks") {
- next;
- }
- # See if this "feature" is in the list of supported protocols
- elsif (grep /^$f$/, @protocols) {
- next;
- }
- $why = "curl lacks $f support";
- last;
+ $why = "curl has $1 support";
+ last;
+ }
}
if(!$why) {
my @keywords = getpart("info", "keywords");
my $match;
my $k;
+
+ if(!$keywords[0]) {
+ $why = "missing the <keywords> section!";
+ }
+
for $k (@keywords) {
chomp $k;
if ($disabled_keywords{$k}) {
delete $oldenv{$var};
}
+ # remove test server commands file before servers are started/verified
+ unlink($FTPDCMD) if(-f $FTPDCMD);
+
# timestamp required servers verification start
$timesrvrini{$testnum} = Time::HiRes::time() if($timestats);
$teststat[$testnum]=$why; # store reason for this test case
if(!$short) {
- printf "test %03d SKIPPED: $why\n", $testnum;
+ if($skipped{$why} <= 3) {
+ # show only the first three skips for each reason
+ logmsg sprintf("test %03d SKIPPED: $why\n", $testnum);
+ }
}
timestampskippedevents($testnum);
return -1;
}
- logmsg sprintf("test %03d...", $testnum);
+ logmsg sprintf("test %03d...", $testnum) if(!$automakestyle);
# extract the reply data
my @reply = getpart("reply", "data");
my @replycheck = getpart("reply", "datacheck");
+ my %replyattr = getpartattr("reply", "data");
+ my %replycheckattr = getpartattr("reply", "datacheck");
+
if (@replycheck) {
# we use this file instead to check the final output against
- my %hash = getpartattr("reply", "datacheck");
- if($hash{'nonewline'}) {
+ if($replycheckattr{'nonewline'}) {
# Yes, we must cut off the final newline from the final line
# of the datacheck
chomp($replycheck[$#replycheck]);
}
+ if($replycheckattr{'mode'}) {
+ $replyattr{'mode'} = $replycheckattr{'mode'};
+ }
@reply=@replycheck;
}
# this is the valid protocol blurb curl should generate
my @protocol= fixarray ( getpart("verify", "protocol") );
+ # this is the valid protocol blurb curl should generate to a proxy
+ my @proxyprot = fixarray ( getpart("verify", "proxy") );
+
# redirected stdout/stderr to these files
$STDOUT="$LOGDIR/stdout$testnum";
$STDERR="$LOGDIR/stderr$testnum";
# name of the test
my @testname= getpart("client", "name");
-
- if(!$short) {
- my $name = $testname[0];
- $name =~ s/\n//g;
- logmsg "[$name]\n";
- }
+ my $testname = $testname[0];
+ $testname =~ s/\n//g;
+ logmsg "[$testname]\n" if(!$short);
if($listonly) {
timestampskippedevents($testnum);
chomp $tool;
}
- # remove server output logfiles
+ # remove server output logfile
unlink($SERVERIN);
unlink($SERVER2IN);
+ unlink($PROXYIN);
if(@ftpservercmd) {
# write the instructions to file
# there was no command given, use something silly
$cmd="-";
}
- if($curl_debug) {
+ if($has_memory_tracking) {
unlink($memdump);
}
my $CMDLINE;
my $cmdargs;
my $cmdtype = $cmdhash{'type'} || "default";
+ my $fail_due_event_based = $evbased;
if($cmdtype eq "perl") {
# run the command line prepended with "perl"
$cmdargs ="$cmd";
$tool=$CMDLINE;
$disablevalgrind=1;
}
+ elsif($cmdtype eq "shell") {
+ # run the command line prepended with "/bin/sh"
+ $cmdargs ="$cmd";
+ $CMDLINE = "/bin/sh ";
+ $tool=$CMDLINE;
+ $disablevalgrind=1;
+ }
elsif(!$tool) {
- # run curl, add --verbose for debug information output
- $cmd = "-1 ".$cmd if(exists $feature{"SSL"} && ($has_axtls));
- $cmdargs ="$out --include --verbose --trace-time $cmd";
+ # run curl, add suitable command line options
+ $cmd = "-1 ".$cmd if(exists $feature{"SSL"} && ($has_axtls));
+
+ my $inc="";
+ if((!$cmdhash{'option'}) || ($cmdhash{'option'} !~ /no-include/)) {
+ $inc = " --include";
+ }
+
+ $cmdargs = "$out$inc ";
+ $cmdargs .= "--trace-ascii log/trace$testnum ";
+ $cmdargs .= "--trace-time ";
+ if($evbased) {
+ $cmdargs .= "--test-event ";
+ $fail_due_event_based--;
+ }
+ $cmdargs .= $cmd;
}
else {
$cmdargs = " $cmd"; # $cmd is the command line for the test file
}
if(! -f $CMDLINE) {
- print "The tool set in the test case for this: '$tool' does not exist\n";
+ logmsg "The tool set in the test case for this: '$tool' does not exist\n";
timestampskippedevents($testnum);
return -1;
}
$DBGCURL=$CMDLINE;
}
+ if($gdbthis) {
+ # gdb is incompatible with valgrind, so disable it when debugging
+ # Perhaps a better approach would be to run it under valgrind anyway
+ # with --db-attach=yes or --vgdb=yes.
+ $disablevalgrind=1;
+ }
+
+ if($fail_due_event_based) {
+ logmsg "This test cannot run event based\n";
+ return -1;
+ }
+
my @stdintest = getpart("client", "stdin");
if(@stdintest) {
my $stdinfile="$LOGDIR/stdin-for-$testnum";
+
+ my %hash = getpartattr("client", "stdin");
+ if($hash{'nonewline'}) {
+ # cut off the final newline from the final line of the stdin data
+ chomp($stdintest[$#stdintest]);
+ }
+
writearray($stdinfile, \@stdintest);
$cmdargs .= " <$stdinfile";
my $valgrindcmd = "$valgrind ";
$valgrindcmd .= "$valgrind_tool " if($valgrind_tool);
$valgrindcmd .= "--leak-check=yes ";
+ $valgrindcmd .= "--suppressions=$srcdir/valgrind.supp ";
+ # $valgrindcmd .= "--gen-suppressions=all ";
$valgrindcmd .= "--num-callers=16 ";
$valgrindcmd .= "${valgrind_logfile}=$LOGDIR/valgrind$testnum";
$CMDLINE = "$valgrindcmd $CMDLINE";
"$gdb --directory libtest $DBGCURL -x $LOGDIR/gdbcmd");
}
elsif($gdbthis) {
- runclient("$gdb --directory libtest $DBGCURL -x $LOGDIR/gdbcmd");
+ my $GDBW = ($gdbxwin) ? "-w" : "";
+ runclient("$gdb --directory libtest $DBGCURL $GDBW -x $LOGDIR/gdbcmd");
$cmdres=0; # makes it always continue after a debugged run
}
else {
# Test harness ssh server does not have this synchronization mechanism,
# this implies that some ssh server based tests might need a small delay
# once that the client command has run to avoid false test failures.
+ #
+ # gnutls-serv also lacks this synchronization mechanism, so gnutls-serv
+ # based tests might need a small delay once that the client command has
+ # run to avoid false test failures.
sleep($postcommanddelay) if($postcommanddelay);
my @killservers;
foreach my $server (@killtestservers) {
chomp $server;
- if($server =~ /^(ftp|http|imap|pop3|smtp)s(.*)$/) {
- # given an ssl server, also kill non-ssl underlying one
+ if($server =~ /^(ftp|http|imap|pop3|smtp)s((\d*)(-ipv6|))$/) {
+ # given a stunnel ssl server, also kill non-ssl underlying one
push @killservers, "${1}${2}";
}
- elsif($server =~ /^(ftp|http|imap|pop3|smtp)(.*)$/) {
- # given a non-ssl server, also kill ssl piggybacking one
+ elsif($server =~ /^(ftp|http|imap|pop3|smtp)((\d*)(-ipv6|))$/) {
+ # given a non-ssl server, also kill stunnel piggybacking one
push @killservers, "${1}s${2}";
}
- elsif($server =~ /^(socks)(.*)$/) {
- # given an socks server, also kill ssh underlying one
+ elsif($server =~ /^(socks)((\d*)(-ipv6|))$/) {
+ # given a socks server, also kill ssh underlying one
push @killservers, "ssh${2}";
}
- elsif($server =~ /^(ssh)(.*)$/) {
- # given an ssh server, also kill socks piggybacking one
+ elsif($server =~ /^(ssh)((\d*)(-ipv6|))$/) {
+ # given a ssh server, also kill socks piggybacking one
push @killservers, "socks${2}";
}
push @killservers, $server;
}
# remove the test server commands file after each test
- unlink($FTPDCMD);
+ unlink($FTPDCMD) if(-f $FTPDCMD);
# run the postcheck command
my @postcheck= getpart("client", "postcheck");
my $errorcode = $err[0] || "0";
my $ok="";
my $res;
+ chomp $errorcode;
if (@validstdout) {
# verify redirected stdout
my @actual = loadarray($STDOUT);
my $filemode=$hash{'mode'};
if($filemode && ($filemode eq "text") && $has_textaware) {
# text mode when running on windows: fix line endings
- map s/\r\n/\n/g, @actual;
+ map s/\r\n/\n/g, @validstdout;
+ map s/\n/\r\n/g, @validstdout;
}
if($hash{'nonewline'}) {
chomp($validstdout[$#validstdout]);
}
- $res = compare("stdout", \@actual, \@validstdout);
+ $res = compare($testnum, $testname, "stdout", \@actual, \@validstdout);
if($res) {
- # timestamp test result verification end
- $timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
return 1;
}
$ok .= "s";
$ok .= "-"; # stdout not checked
}
- my %replyattr = getpartattr("reply", "data");
+ if(@protocol) {
+ # Verify the sent request
+ my @out = loadarray($SERVERIN);
+
+ # what to cut off from the live protocol sent by curl
+ my @strip = getpart("verify", "strip");
+
+ my @protstrip=@protocol;
+
+ # check if there's any attributes on the verify/protocol section
+ my %hash = getpartattr("verify", "protocol");
+
+ if($hash{'nonewline'}) {
+ # Yes, we must cut off the final newline from the final line
+ # of the protocol data
+ chomp($protstrip[$#protstrip]);
+ }
+
+ for(@strip) {
+ # strip off all lines that match the patterns from both arrays
+ chomp $_;
+ @out = striparray( $_, \@out);
+ @protstrip= striparray( $_, \@protstrip);
+ }
+
+ # what parts to cut off from the protocol
+ my @strippart = getpart("verify", "strippart");
+ my $strip;
+ for $strip (@strippart) {
+ chomp $strip;
+ for(@out) {
+ eval $strip;
+ }
+ }
+
+ $res = compare($testnum, $testname, "protocol", \@out, \@protstrip);
+ if($res) {
+ return 1;
+ }
+
+ $ok .= "p";
+
+ }
+ else {
+ $ok .= "-"; # protocol not checked
+ }
+
if(!$replyattr{'nocheck'} && (@reply || $replyattr{'sendzero'})) {
# verify the received data
my @out = loadarray($CURLOUT);
- my %hash = getpartattr("reply", "data");
# get the mode attribute
- my $filemode=$hash{'mode'};
+ my $filemode=$replyattr{'mode'};
if($filemode && ($filemode eq "text") && $has_textaware) {
# text mode when running on windows: fix line endings
- map s/\r\n/\n/g, @out;
+ map s/\r\n/\n/g, @reply;
+ map s/\n/\r\n/g, @reply;
}
- $res = compare("data", \@out, \@reply);
+ $res = compare($testnum, $testname, "data", \@out, \@reply);
if ($res) {
- # timestamp test result verification end
- $timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
return 1;
}
$ok .= "d";
if(@upload) {
# verify uploaded data
my @out = loadarray("$LOGDIR/upload.$testnum");
- $res = compare("upload", \@out, \@upload);
+ $res = compare($testnum, $testname, "upload", \@out, \@upload);
if ($res) {
- # timestamp test result verification end
- $timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
return 1;
}
$ok .= "u";
$ok .= "-"; # upload not checked
}
- if(@protocol) {
- # Verify the sent request
- my @out = loadarray($SERVERIN);
+ if(@proxyprot) {
+ # Verify the sent proxy request
+ my @out = loadarray($PROXYIN);
- # what to cut off from the live protocol sent by curl
+ # what to cut off from the live protocol sent by curl, we use the
+ # same rules as for <protocol>
my @strip = getpart("verify", "strip");
- my @protstrip=@protocol;
+ my @protstrip=@proxyprot;
# check if there's any attributes on the verify/protocol section
- my %hash = getpartattr("verify", "protocol");
+ my %hash = getpartattr("verify", "proxy");
if($hash{'nonewline'}) {
# Yes, we must cut off the final newline from the final line
}
}
- $res = compare("protocol", \@out, \@protstrip);
+ $res = compare($testnum, $testname, "proxy", \@out, \@protstrip);
if($res) {
- # timestamp test result verification end
- $timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
return 1;
}
- $ok .= "p";
+ $ok .= "P";
}
else {
$ok .= "-"; # protocol not checked
}
- my @outfile=getpart("verify", "file");
- if(@outfile) {
- # we're supposed to verify a dynamically generated file!
- my %hash = getpartattr("verify", "file");
+ my $outputok;
+ for my $partsuffix (('', '1', '2', '3', '4')) {
+ my @outfile=getpart("verify", "file".$partsuffix);
+ if(@outfile || partexists("verify", "file".$partsuffix) ) {
+ # we're supposed to verify a dynamically generated file!
+ my %hash = getpartattr("verify", "file".$partsuffix);
- my $filename=$hash{'name'};
- if(!$filename) {
- logmsg "ERROR: section verify=>file has no name attribute\n";
- stopservers($verbose);
- # timestamp test result verification end
- $timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
- return -1;
- }
- my @generated=loadarray($filename);
+ my $filename=$hash{'name'};
+ if(!$filename) {
+ logmsg "ERROR: section verify=>file$partsuffix ".
+ "has no name attribute\n";
+ stopservers($verbose);
+ # timestamp test result verification end
+ $timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
+ return -1;
+ }
+ my @generated=loadarray($filename);
- # what parts to cut off from the file
- my @stripfile = getpart("verify", "stripfile");
+ # what parts to cut off from the file
+ my @stripfile = getpart("verify", "stripfile".$partsuffix);
- my $filemode=$hash{'mode'};
- if($filemode && ($filemode eq "text") && $has_textaware) {
- # text mode when running on windows means adding an extra
- # strip expression
- push @stripfile, "s/\r\n/\n/";
- }
+ my $filemode=$hash{'mode'};
+ if($filemode && ($filemode eq "text") && $has_textaware) {
+ # text mode when running on windows: fix line endings
+ map s/\r\n/\n/g, @outfile;
+ map s/\n/\r\n/g, @outfile;
+ }
- my $strip;
- for $strip (@stripfile) {
- chomp $strip;
- for(@generated) {
- eval $strip;
+ my $strip;
+ for $strip (@stripfile) {
+ chomp $strip;
+ my @newgen;
+ for(@generated) {
+ eval $strip;
+ if($_) {
+ push @newgen, $_;
+ }
+ }
+ # this is to get rid of array entries that vanished (zero
+ # length) because of replacements
+ @generated = @newgen;
}
- }
- @outfile = fixarray(@outfile);
+ @outfile = fixarray(@outfile);
- $res = compare("output", \@generated, \@outfile);
- if($res) {
- # timestamp test result verification end
- $timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
- return 1;
- }
+ $res = compare($testnum, $testname, "output ($filename)",
+ \@generated, \@outfile);
+ if($res) {
+ return 1;
+ }
- $ok .= "o";
- }
- else {
- $ok .= "-"; # output not checked
+ $outputok = 1; # output checked
+ }
}
+ $ok .= ($outputok) ? "o" : "-"; # output checked or not
# accept multiple comma-separated error codes
my @splerr = split(/ *, */, $errorcode);
}
else {
if(!$short) {
- printf("\n%s returned $cmdres, %d was expected\n",
- (!$tool)?"curl":$tool, $errorcode);
+ logmsg sprintf("\n%s returned $cmdres, when expecting %s\n",
+ (!$tool)?"curl":$tool, $errorcode);
}
logmsg " exit FAILED\n";
# timestamp test result verification end
return 1;
}
- if($curl_debug) {
+ if($has_memory_tracking) {
if(! -f $memdump) {
- logmsg "\n** ALERT! memory debugging with no output file?\n"
+ logmsg "\n** ALERT! memory tracking with no output file?\n"
if(!$cmdtype eq "perl");
}
else {
}
my @e = valgrindparse($srcdir, $feature{'SSL'}, "$LOGDIR/$vgfile");
if(@e && $e[0]) {
- logmsg " valgrind ERROR ";
- logmsg @e;
+ if($automakestyle) {
+ logmsg "FAIL: $testnum - $testname - valgrind\n";
+ }
+ else {
+ logmsg " valgrind ERROR ";
+ logmsg @e;
+ }
# timestamp test result verification end
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
return 1;
else {
$ok .= "-"; # valgrind not checked
}
+ # add 'E' for event-based
+ $ok .= $evbased ? "E" : "-";
logmsg "$ok " if(!$short);
my $left=sprintf("remaining: %02d:%02d",
$estleft/60,
$estleft%60);
- printf "OK (%-3d out of %-3d, %s)\n", $count, $total, $left;
+
+ if(!$automakestyle) {
+ logmsg sprintf("OK (%-3d out of %-3d, %s)\n", $count, $total, $left);
+ }
+ else {
+ logmsg "PASS: $testnum - $testname\n";
+ }
# the test succeeded, remove all log files
if(!$keepoutfiles) {
#######################################################################
# Stop all running test servers
+#
sub stopservers {
my $verbose = $_[0];
#
# startservers() starts all the named servers
#
# Returns: string with error reason or blank for success
-
+#
sub startservers {
my @what = @_;
my ($pid, $pid2);
for(@what) {
my (@whatlist) = split(/\s+/,$_);
my $what = lc($whatlist[0]);
- $what =~ s/[^a-z0-9-+]//g;
+ $what =~ s/[^a-z0-9-]//g;
my $certfile;
- if($what =~ /^(ftp|http|imap|pop3|smtp)s(.*)$/) {
+ if($what =~ /^(ftp|http|imap|pop3|smtp)s((\d*)(-ipv6|))$/) {
$certfile = ($whatlist[1]) ? $whatlist[1] : 'stunnel.pem';
}
($what eq "ftp") ||
($what eq "imap") ||
($what eq "smtp")) {
+ if($torture && $run{$what} &&
+ !responsive_pingpong_server($what, "", $verbose)) {
+ stopserver($what);
+ }
if(!$run{$what}) {
($pid, $pid2) = runpingpongserver($what, "", $verbose);
if($pid <= 0) {
}
}
elsif($what eq "ftp2") {
+ if($torture && $run{'ftp2'} &&
+ !responsive_pingpong_server("ftp", "2", $verbose)) {
+ stopserver('ftp2');
+ }
if(!$run{'ftp2'}) {
($pid, $pid2) = runpingpongserver("ftp", "2", $verbose);
if($pid <= 0) {
}
}
elsif($what eq "ftp-ipv6") {
+ if($torture && $run{'ftp-ipv6'} &&
+ !responsive_pingpong_server("ftp", "", $verbose, "ipv6")) {
+ stopserver('ftp-ipv6');
+ }
if(!$run{'ftp-ipv6'}) {
($pid, $pid2) = runpingpongserver("ftp", "", $verbose, "ipv6");
if($pid <= 0) {
}
}
elsif($what eq "gopher") {
+ if($torture && $run{'gopher'} &&
+ !responsive_http_server("gopher", $verbose, 0, $GOPHERPORT)) {
+ stopserver('gopher');
+ }
if(!$run{'gopher'}) {
($pid, $pid2) = runhttpserver("gopher", $verbose, 0,
$GOPHERPORT);
if($pid <= 0) {
return "failed starting GOPHER server";
}
- printf ("* pid gopher => %d %d\n", $pid, $pid2) if($verbose);
+ logmsg sprintf ("* pid gopher => %d %d\n", $pid, $pid2)
+ if($verbose);
$run{'gopher'}="$pid $pid2";
}
}
elsif($what eq "gopher-ipv6") {
+ if($torture && $run{'gopher-ipv6'} &&
+ !responsive_http_server("gopher", $verbose, "ipv6",
+ $GOPHER6PORT)) {
+ stopserver('gopher-ipv6');
+ }
if(!$run{'gopher-ipv6'}) {
($pid, $pid2) = runhttpserver("gopher", $verbose, "ipv6",
$GOPHER6PORT);
}
}
elsif($what eq "http") {
+ if($torture && $run{'http'} &&
+ !responsive_http_server("http", $verbose, 0, $HTTPPORT)) {
+ stopserver('http');
+ }
if(!$run{'http'}) {
($pid, $pid2) = runhttpserver("http", $verbose, 0,
$HTTPPORT);
if($pid <= 0) {
return "failed starting HTTP server";
}
- printf ("* pid http => %d %d\n", $pid, $pid2) if($verbose);
+ logmsg sprintf ("* pid http => %d %d\n", $pid, $pid2)
+ if($verbose);
$run{'http'}="$pid $pid2";
}
}
+ elsif($what eq "http-proxy") {
+ if($torture && $run{'http-proxy'} &&
+ !responsive_http_server("http", $verbose, "proxy",
+ $HTTPPROXYPORT)) {
+ stopserver('http-proxy');
+ }
+ if(!$run{'http-proxy'}) {
+ ($pid, $pid2) = runhttpserver("http", $verbose, "proxy",
+ $HTTPPROXYPORT);
+ if($pid <= 0) {
+ return "failed starting HTTP-proxy server";
+ }
+ logmsg sprintf ("* pid http-proxy => %d %d\n", $pid, $pid2)
+ if($verbose);
+ $run{'http-proxy'}="$pid $pid2";
+ }
+ }
elsif($what eq "http-ipv6") {
+ if($torture && $run{'http-ipv6'} &&
+ !responsive_http_server("http", $verbose, "IPv6", $HTTP6PORT)) {
+ stopserver('http-ipv6');
+ }
if(!$run{'http-ipv6'}) {
- ($pid, $pid2) = runhttpserver("http", $verbose, "IPv6",
+ ($pid, $pid2) = runhttpserver("http", $verbose, "ipv6",
$HTTP6PORT);
if($pid <= 0) {
return "failed starting HTTP-IPv6 server";
$run{'http-ipv6'}="$pid $pid2";
}
}
+ elsif($what eq "http-pipe") {
+ if($torture && $run{'http-pipe'} &&
+ !responsive_http_server("http", $verbose, "pipe",
+ $HTTPPIPEPORT)) {
+ stopserver('http-pipe');
+ }
+ if(!$run{'http-pipe'}) {
+ ($pid, $pid2) = runhttpserver("http", $verbose, "pipe",
+ $HTTPPIPEPORT);
+ if($pid <= 0) {
+ return "failed starting HTTP-pipe server";
+ }
+ logmsg sprintf ("* pid http-pipe => %d %d\n", $pid, $pid2)
+ if($verbose);
+ $run{'http-pipe'}="$pid $pid2";
+ }
+ }
elsif($what eq "rtsp") {
+ if($torture && $run{'rtsp'} &&
+ !responsive_rtsp_server($verbose)) {
+ stopserver('rtsp');
+ }
if(!$run{'rtsp'}) {
($pid, $pid2) = runrtspserver($verbose);
if($pid <= 0) {
}
}
elsif($what eq "rtsp-ipv6") {
+ if($torture && $run{'rtsp-ipv6'} &&
+ !responsive_rtsp_server($verbose, "IPv6")) {
+ stopserver('rtsp-ipv6');
+ }
if(!$run{'rtsp-ipv6'}) {
($pid, $pid2) = runrtspserver($verbose, "IPv6");
if($pid <= 0) {
$run{'rtsp-ipv6'}="$pid $pid2";
}
}
-
elsif($what eq "ftps") {
if(!$stunnel) {
# we can't run ftps tests without stunnel
# stop server when running and using a different cert
stopserver('ftps');
}
+ if($torture && $run{'ftp'} &&
+ !responsive_pingpong_server("ftp", "", $verbose)) {
+ stopserver('ftp');
+ }
if(!$run{'ftp'}) {
($pid, $pid2) = runpingpongserver("ftp", "", $verbose);
if($pid <= 0) {
}
elsif($what eq "https") {
if(!$stunnel) {
- # we can't run ftps tests without stunnel
+ # we can't run https tests without stunnel
return "no stunnel";
}
if(!$ssl_version) {
- # we can't run ftps tests if libcurl is SSL-less
+ # we can't run https tests if libcurl is SSL-less
return "curl lacks SSL support";
}
if($runcert{'https'} && ($runcert{'https'} ne $certfile)) {
# stop server when running and using a different cert
stopserver('https');
}
+ if($torture && $run{'http'} &&
+ !responsive_http_server("http", $verbose, 0, $HTTPPORT)) {
+ stopserver('http');
+ }
if(!$run{'http'}) {
($pid, $pid2) = runhttpserver("http", $verbose, 0,
$HTTPPORT);
$run{'https'}="$pid $pid2";
}
}
- elsif($what eq "http+tls-srp") {
- if(!$has_gnutls) {
- return "no GnuTLS";
+ elsif($what eq "httptls") {
+ if(!$httptlssrv) {
+ # for now, we can't run http TLS-EXT tests without gnutls-serv
+ return "no gnutls-serv";
}
- if(!$run{'http+tls-srp'}) {
- ($pid, $pid2) = runhttptlssrpserver($verbose);
+ if($torture && $run{'httptls'} &&
+ !responsive_httptls_server($verbose, "IPv4")) {
+ stopserver('httptls');
+ }
+ if(!$run{'httptls'}) {
+ ($pid, $pid2) = runhttptlsserver($verbose, "IPv4");
if($pid <= 0) {
- return "failed starting HTTP+TLS-SRP server (gnutls-serv)";
+ return "failed starting HTTPTLS server (gnutls-serv)";
}
- logmsg sprintf("* pid http+tls-srp => %d %d\n", $pid, $pid2)
+ logmsg sprintf("* pid httptls => %d %d\n", $pid, $pid2)
if($verbose);
- $run{'http+tls-srp'}="$pid $pid2";
+ $run{'httptls'}="$pid $pid2";
+ }
+ }
+ elsif($what eq "httptls-ipv6") {
+ if(!$httptlssrv) {
+ # for now, we can't run http TLS-EXT tests without gnutls-serv
+ return "no gnutls-serv";
+ }
+ if($torture && $run{'httptls-ipv6'} &&
+ !responsive_httptls_server($verbose, "IPv6")) {
+ stopserver('httptls-ipv6');
+ }
+ if(!$run{'httptls-ipv6'}) {
+ ($pid, $pid2) = runhttptlsserver($verbose, "IPv6");
+ if($pid <= 0) {
+ return "failed starting HTTPTLS-IPv6 server (gnutls-serv)";
+ }
+ logmsg sprintf("* pid httptls-ipv6 => %d %d\n", $pid, $pid2)
+ if($verbose);
+ $run{'httptls-ipv6'}="$pid $pid2";
}
}
elsif($what eq "tftp") {
+ if($torture && $run{'tftp'} &&
+ !responsive_tftp_server("", $verbose)) {
+ stopserver('tftp');
+ }
if(!$run{'tftp'}) {
($pid, $pid2) = runtftpserver("", $verbose);
if($pid <= 0) {
}
}
elsif($what eq "tftp-ipv6") {
+ if($torture && $run{'tftp-ipv6'} &&
+ !responsive_tftp_server("", $verbose, "IPv6")) {
+ stopserver('tftp-ipv6');
+ }
if(!$run{'tftp-ipv6'}) {
($pid, $pid2) = runtftpserver("", $verbose, "IPv6");
if($pid <= 0) {
#
# Returns: a string, blank if everything is fine or a reason why it failed
#
-
sub serverfortest {
my ($testnum)=@_;
return "no server specified";
}
- for (@what) {
- my $proto = lc($_);
- chomp $proto;
- $proto =~ s/\s.*//g; # take first word
- if (! grep /^\Q$proto\E$/, @protocols) {
- if (substr($proto,0,5) ne "socks") {
- return "curl lacks $proto support";
+ for(my $i = scalar(@what) - 1; $i >= 0; $i--) {
+ my $srvrline = $what[$i];
+ chomp $srvrline if($srvrline);
+ if($srvrline =~ /^(\S+)((\s*)(.*))/) {
+ my $server = "${1}";
+ my $lnrest = "${2}";
+ my $tlsext;
+ if($server =~ /^(httptls)(\+)(ext|srp)(\d*)(-ipv6|)$/) {
+ $server = "${1}${4}${5}";
+ $tlsext = uc("TLS-${3}");
+ }
+ if(! grep /^\Q$server\E$/, @protocols) {
+ if(substr($server,0,5) ne "socks") {
+ if($tlsext) {
+ return "curl lacks $tlsext support";
+ }
+ else {
+ return "curl lacks $server server support";
+ }
+ }
}
+ $what[$i] = "$server$lnrest" if($tlsext);
}
}
$DBGCURL=$CURL=$ARGV[1];
shift @ARGV;
}
+ elsif ($ARGV[0] eq "-vc") {
+ # use this path to a curl used to verify servers
+
+ # Particularly useful when you introduce a crashing bug somewhere in
+ # the development version as then it won't be able to run any tests
+ # since it can't verify the servers!
+
+ $VCURL=$ARGV[1];
+ shift @ARGV;
+ }
elsif ($ARGV[0] eq "-d") {
# have the servers display protocol output
$debugprotocol=1;
}
- elsif ($ARGV[0] eq "-f") {
- # run fork-servers, which makes the server fork for all new
- # connections This is NOT what you wanna do without knowing exactly
- # why and for what
- $forkserver=1;
- }
elsif ($ARGV[0] eq "-g") {
# run this test with gdb
$gdbthis=1;
}
+ elsif ($ARGV[0] eq "-gw") {
+ # run this test with windowed gdb
+ $gdbthis=1;
+ $gdbxwin=1;
+ }
elsif($ARGV[0] eq "-s") {
# short output
$short=1;
}
+ elsif($ARGV[0] eq "-am") {
+ # automake-style output
+ $short=1;
+ $automakestyle=1;
+ }
elsif($ARGV[0] eq "-n") {
# no valgrind
undef $valgrind;
# continue anyway, even if a test fail
$anyway=1;
}
+ elsif($ARGV[0] eq "-e") {
+ # run the tests cases event based if possible
+ $run_event_based=1;
+ }
elsif($ARGV[0] eq "-p") {
$postmortem=1;
}
-c path use this curl executable
-d display server debug info
-g run the test case with gdb
+ -gw run the test case with gdb as a windowed application
-h this help text
-k keep stdout and stderr files present after tests
-l list all test case names/descriptions
-r run time statistics
-rf full run time statistics
-s short output
+ -am automake style output PASS/FAIL: [number] [name]
-t[N] torture (simulate memory alloc failures); N means fail Nth alloc
-v verbose output
+ -vc path use this curl only to verify the existing servers
[num] like "5 6 9" or " 5 to 22 " to run those tests only
[!num] like "!5 !6 !9" to disable those tests
[keyword] like "IPv6" to select only tests containing the key word
}
}
-$HTTPPORT = $base++; # HTTP server port
-$HTTPSPORT = $base++; # HTTPS server port
-$FTPPORT = $base++; # FTP server port
-$FTPSPORT = $base++; # FTPS server port
-$HTTP6PORT = $base++; # HTTP IPv6 server port (different IP protocol
- # but we follow the same port scheme anyway)
-$FTP2PORT = $base++; # FTP server 2 port
-$FTP6PORT = $base++; # FTP IPv6 port
-$TFTPPORT = $base++; # TFTP (UDP) port
-$TFTP6PORT = $base++; # TFTP IPv6 (UDP) port
-$SSHPORT = $base++; # SSH (SCP/SFTP) port
-$SOCKSPORT = $base++; # SOCKS port
-$POP3PORT = $base++;
-$POP36PORT = $base++;
-$IMAPPORT = $base++;
-$IMAP6PORT = $base++;
-$SMTPPORT = $base++;
-$SMTP6PORT = $base++;
-$RTSPPORT = $base++;
-$RTSP6PORT = $base++;
-$GOPHERPORT =$base++;
-$GOPHER6PORT=$base++;
-$HTTPTLSSRPPORT=$base++;
+$HTTPPORT = $base++; # HTTP server port
+$HTTPSPORT = $base++; # HTTPS (stunnel) server port
+$FTPPORT = $base++; # FTP server port
+$FTPSPORT = $base++; # FTPS (stunnel) server port
+$HTTP6PORT = $base++; # HTTP IPv6 server port
+$FTP2PORT = $base++; # FTP server 2 port
+$FTP6PORT = $base++; # FTP IPv6 port
+$TFTPPORT = $base++; # TFTP (UDP) port
+$TFTP6PORT = $base++; # TFTP IPv6 (UDP) port
+$SSHPORT = $base++; # SSH (SCP/SFTP) port
+$SOCKSPORT = $base++; # SOCKS port
+$POP3PORT = $base++; # POP3 server port
+$POP36PORT = $base++; # POP3 IPv6 server port
+$IMAPPORT = $base++; # IMAP server port
+$IMAP6PORT = $base++; # IMAP IPv6 server port
+$SMTPPORT = $base++; # SMTP server port
+$SMTP6PORT = $base++; # SMTP IPv6 server port
+$RTSPPORT = $base++; # RTSP server port
+$RTSP6PORT = $base++; # RTSP IPv6 server port
+$GOPHERPORT = $base++; # Gopher IPv4 server port
+$GOPHER6PORT = $base++; # Gopher IPv6 server port
+$HTTPTLSPORT = $base++; # HTTP TLS (non-stunnel) server port
+$HTTPTLS6PORT = $base++; # HTTP TLS (non-stunnel) IPv6 server port
+$HTTPPROXYPORT = $base++; # HTTP proxy port, when using CONNECT
+$HTTPPIPEPORT = $base++; # HTTP pipelining port
#######################################################################
# clear and create logging directory:
$TESTCASES .= " $n";
}
}
+else {
+ my $verified="";
+ map {
+ if (-e "$TESTDIR/test$_") {
+ $verified.="$_ ";
+ }
+ } split(" ", $TESTCASES);
+ if($verified eq "") {
+ print "No existing test cases were specified\n";
+ exit;
+ }
+ $TESTCASES = $verified;
+}
#######################################################################
# Start the command line log
if(($log =~ /^file\d+\.txt/) && ($log !~ /^file$testnum\.txt/)) {
next; # skip fileNnn.txt of other tests
}
+ if(($log =~ /^netrc\d+/) && ($log !~ /^netrc$testnum/)) {
+ next; # skip netrcNnn of other tests
+ }
+ if(($log =~ /^trace\d+/) && ($log !~ /^trace$testnum/)) {
+ next; # skip traceNnn of other tests
+ }
if(($log =~ /^valgrind\d+/) && ($log !~ /^valgrind$testnum(\..*|)$/)) {
next; # skip valgrindNnn of other tests
}
$lasttest = $testnum if($testnum > $lasttest);
$count++;
- my $error = singletest($testnum, $count, scalar(@at));
+ my $error = singletest($run_event_based, $testnum, $count, scalar(@at));
if($error < 0) {
# not a test we can run
next;
# now show all test case numbers that had this reason for being
# skipped
my $c=0;
+ my $max = 9;
for(0 .. scalar @teststat) {
my $t = $_;
if($teststat[$_] && ($teststat[$_] eq $r)) {
- logmsg ", " if($c);
- logmsg $_;
+ if($c < $max) {
+ logmsg ", " if($c);
+ logmsg $_;
+ }
$c++;
}
}
+ if($c > $max) {
+ logmsg " and ".($c-$max)." more";
+ }
logmsg ")\n";
}
}
projects / platform / upstream / curl.git / blobdiff