my $HTTPTLSPORT; # HTTP TLS (non-stunnel) server port
my $HTTPTLS6PORT; # HTTP TLS (non-stunnel) IPv6 server port
my $HTTPPROXYPORT; # HTTP proxy port, when using CONNECT
+my $HTTPPIPEPORT; # HTTP pipelining port
my $srcdir = $ENV{'srcdir'} || '.';
my $CURL="../src/curl".exe_ext(); # what curl executable to run on the tests
# Load serverpidfile hash with pidfile names for all possible servers.
#
sub init_serverpidfile_hash {
- for my $proto (('ftp', 'http', 'imap', 'pop3', 'smtp')) {
+ for my $proto (('ftp', 'http', 'imap', 'pop3', 'smtp', 'http')) {
for my $ssl (('', 's')) {
for my $ipvnum ((4, 6)) {
- for my $idnum ((1, 2)) {
+ for my $idnum ((1, 2, 3)) {
my $serv = servername_id("$proto$ssl", $ipvnum, $idnum);
my $pidf = server_pidfilename("$proto$ssl", $ipvnum, $idnum);
$serverpidfile{$serv} = $pidf;
# All servers relative to the given one must be stopped also
#
my @killservers;
- if($server =~ /^(ftp|http|imap|pop3|smtp)s((\d*)(-ipv6|))$/) {
+ if($server =~ /^(ftp|http|imap|pop3|smtp|httppipe)s((\d*)(-ipv6|))$/) {
# given a stunnel based ssl server, also kill non-ssl underlying one
push @killservers, "${1}${2}";
}
- elsif($server =~ /^(ftp|http|imap|pop3|smtp)((\d*)(-ipv6|))$/) {
+ elsif($server =~ /^(ftp|http|imap|pop3|smtp|httppipe)((\d*)(-ipv6|))$/) {
# given a non-ssl server, also kill stunnel based ssl piggybacking one
push @killservers, "${1}s${2}";
}
'pop3' => \&verifyftp,
'imap' => \&verifyftp,
'smtp' => \&verifyftp,
+ 'httppipe' => \&verifyhttp,
'ftps' => \&verifyftp,
'tftp' => \&verifyftp,
'ssh' => \&verifyssh,
my $pidfile;
my $logfile;
my $flags = "";
+ my $exe = "$perl $srcdir/httpserver.pl";
if($alt eq "ipv6") {
# if IPv6, use a different setup
# basically the same, but another ID
$idnum = 2;
}
+ elsif($alt eq "pipe") {
+ # basically the same, but another ID
+ $idnum = 3;
+ $exe = "python $srcdir/http_pipe.py";
+ }
$server = servername_id($proto, $ipvnum, $idnum);
$flags .= "--id $idnum " if($idnum > 1);
$flags .= "--ipv$ipvnum --port $port --srcdir \"$srcdir\"";
- my $cmd = "$perl $srcdir/httpserver.pl $flags";
+ my $cmd = "$exe $flags";
+ my ($httppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
+
+ if($httppid <= 0 || !kill(0, $httppid)) {
+ # it is NOT alive
+ logmsg "RUN: failed to start the $srvrname server\n";
+ stopserver($server, "$pid2");
+ displaylogs($testnumcheck);
+ $doesntrun{$pidfile} = 1;
+ return (0,0);
+ }
+
+ # Server is up. Verify that we can speak to it.
+ my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
+ if(!$pid3) {
+ logmsg "RUN: $srvrname server failed verification\n";
+ # failed to talk to it properly. Kill the server and return failure
+ stopserver($server, "$httppid $pid2");
+ displaylogs($testnumcheck);
+ $doesntrun{$pidfile} = 1;
+ return (0,0);
+ }
+ $pid2 = $pid3;
+
+ if($verbose) {
+ logmsg "RUN: $srvrname server is now running PID $httppid\n";
+ }
+
+ sleep(1);
+
+ return ($httppid, $pid2);
+}
+
+#######################################################################
+# start the http server
+#
+sub runhttp_pipeserver {
+ my ($proto, $verbose, $alt, $port) = @_;
+ my $ip = $HOSTIP;
+ my $ipvnum = 4;
+ my $idnum = 1;
+ my $server;
+ my $srvrname;
+ my $pidfile;
+ my $logfile;
+ my $flags = "";
+
+ if($alt eq "ipv6") {
+ # No IPv6
+ }
+
+ $server = servername_id($proto, $ipvnum, $idnum);
+
+ $pidfile = $serverpidfile{$server};
+
+ # don't retry if the server doesn't work
+ if ($doesntrun{$pidfile}) {
+ return (0,0);
+ }
+
+ my $pid = processexists($pidfile);
+ if($pid > 0) {
+ stopserver($server, "$pid");
+ }
+ unlink($pidfile) if(-f $pidfile);
+
+ $srvrname = servername_str($proto, $ipvnum, $idnum);
+
+ $logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
+
+ $flags .= "--verbose " if($debugprotocol);
+ $flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
+ $flags .= "--id $idnum " if($idnum > 1);
+ $flags .= "--port $port --srcdir \"$srcdir\"";
+
+ my $cmd = "$srcdir/http_pipe.py $flags";
my ($httppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
if($httppid <= 0 || !kill(0, $httppid)) {
# 'http-proxy' is used in test cases to do CONNECT through
push @protocols, 'http-proxy';
+ # 'http-pipe' is the special server for testing pipelining
+ push @protocols, 'http-pipe';
+
# 'none' is used in test cases to mean no server
push @protocols, 'none';
}
}
logmsg "\n";
}
+ logmsg sprintf("* HTTP-PIPE/%d \n", $HTTPPIPEPORT);
$has_textaware = ($^O eq 'MSWin32') || ($^O eq 'msys');
$$thing =~ s/%HTTP6PORT/$HTTP6PORT/g;
$$thing =~ s/%HTTPSPORT/$HTTPSPORT/g;
$$thing =~ s/%HTTPPORT/$HTTPPORT/g;
+ $$thing =~ s/%HTTPPIPEPORT/$HTTPPIPEPORT/g;
$$thing =~ s/%PROXYPORT/$HTTPPROXYPORT/g;
$$thing =~ s/%IMAP6PORT/$IMAP6PORT/g;
$run{'http-ipv6'}="$pid $pid2";
}
}
+ elsif($what eq "http-pipe") {
+ if($torture && $run{'http-pipe'} &&
+ !responsive_http_server("http", $verbose, "pipe",
+ $HTTPPIPEPORT)) {
+ stopserver('http-pipe');
+ }
+ if(!$run{'http-pipe'}) {
+ ($pid, $pid2) = runhttpserver("http", $verbose, "pipe",
+ $HTTPPIPEPORT);
+ if($pid <= 0) {
+ return "failed starting HTTP-pipe server";
+ }
+ logmsg sprintf ("* pid http-pipe => %d %d\n", $pid, $pid2)
+ if($verbose);
+ $run{'http-pipe'}="$pid $pid2";
+ }
+ }
elsif($what eq "rtsp") {
if($torture && $run{'rtsp'} &&
!responsive_rtsp_server($verbose)) {
$HTTPTLSPORT = $base++; # HTTP TLS (non-stunnel) server port
$HTTPTLS6PORT = $base++; # HTTP TLS (non-stunnel) IPv6 server port
$HTTPPROXYPORT = $base++; # HTTP proxy port, when using CONNECT
+$HTTPPIPEPORT = $base++; # HTTP pipelining port
#######################################################################
# clear and create logging directory:
projects / platform / upstream / curl.git / blobdiff