source dlog_test_header
-#relevant pids default vals
-UTIL_PID=-1
-DLOGSEND_PID=-1
-MT_TEST=-1
-LOGGER=-1
-TEST_DYNAMIC_FILTERS=true
-
-
-cleanup() {
- [ "$UTIL_PID" -ne -1 ] && kill "$UTIL_PID" > /dev/null 2>&1
- [ "$MT_TEST" -ne -1 ] && kill "$MT_TEST" > /dev/null 2>&1
- [ "$LOGGER" -ne -1 ] && kill "$LOGGER" > /dev/null 2>&1
- # Shellcheck doesn't like this because the rm call is bad if $TESTDIR is empty.
- # However, such cases would be caught by the conditional.
- # shellcheck disable=SC2115
- [ -d "$TESTDIR" ] && rm -rf "$TESTDIR"/*
- [ -d "$RUNTIME_FILTERS_DIR" ] && rm -rf "$RUNTIME_FILTERS_DIR"
-}
-
trap cleanup 0
USAGE_MESSAGE="usage: $0 [--verbose] [--quick] pipe|logger|zero-copy"
RUNTIME_FILTERS_DIR="/tmp/dlog-filters/"
mkdir -m 777 -p "$RUNTIME_FILTERS_DIR"
- PREEARLYQUIT_CONFIG_PATH="$DLOG_CONFIG_PATH"
- DLOG_CONFIG_PATH="$TESTDIR/earlyquit.conf"
if [ "$quick" -ne 1 ]; then
- for PERSISTENT in 1 0; do
- for KMSG in 1 0; do
- for SYSLOG in 1 0; do
- for QOS in 1 0; do
- # TODO: Does syslog even work? Disabling for now.
- [ "$SYSLOG" -eq 1 ] && continue
-
- if [ "$QOS" -eq 1 ]; then
- SOURCE="@datadir@/dlog-$type.conf.qos"
- else
- SOURCE="@datadir@/dlog-$type.conf.test"
- fi
-
- if [ "$PERSISTENT" -eq 1 ]; then
- cp "$SOURCE" "$DLOG_CONFIG_PATH"
- else
- sed 's/^dlog_logger_conf.*$/#\0/' <"$SOURCE" >"$DLOG_CONFIG_PATH"
- fi
-
- echo "handle_kmsg=$KMSG" >> "$DLOG_CONFIG_PATH"
- echo "syslog_force=$SYSLOG" >> "$DLOG_CONFIG_PATH"
-
- dlog_logger -t 0 &
- LOGGER=$!
- sleep 1
-
- kill $LOGGER > /dev/null
- STOPPED=$?
- LOGGER=-1
-
- if [ "$PERSISTENT" -eq 0 ] && [ "$KMSG" -eq 0 ] && [ "$SYSLOG" -eq 0 ] && [ "$QOS" -eq 0 ] && [ "$type" = "logger" ]; then
- EXPECTED=1
- else
- EXPECTED=0
- fi
-
- LOG_DETAILS="testing if daemon stops when not needed (persistent=$PERSISTENT, kmsg=$KMSG, syslog=$SYSLOG, qos=$QOS)"
- [ "$STOPPED" -eq "$EXPECTED" ] && ok || fail
- done; done; done; done
+ dlog_test_daemon_early_quit $type
fi
- DLOG_CONFIG_PATH="$PREEARLYQUIT_CONFIG_PATH"
# Start the daemon
dlog_logger -t 0 &
format="json"
if [ "$type" = "pipe" ]; then
- REGEX="s/^\{\"priority\":\"(verbose|debug|info|warning|error|fatal|silent)\",\"pid\":[1-9][0-9]*,\"tid\":[1-9][0-9]*,\"recv_real\":\"[0-9]{4}-[0-9]{2}-[0-9]{2}T[0-9]{2}:[0-9]{2}:[0-9]{2}$regex_timezone\",\"recv_mono\":[1-9][0-9]+\.[0-9]{9},\"sent_real\":\"[0-9]{4}-[0-9]{2}-[0-9]{2}T[0-9]{2}:[0-9]{2}:[0-9]{2}$regex_timezone\",\"sent_mono\":[1-9][0-9]+\.[0-9]{9},\"tag\":\"[[:print:]]*\",\"msg\":\"[[:print:]]*\"\}$/1/g"
+ REGEX="s/^\{\"priority\":\"(verbose|debug|info|warning|error|fatal|silent)\",\"pid\":[1-9][0-9]*,\"tid\":[1-9][0-9]*,\"recv_real\":\"[0-9]{4}-[0-9]{2}-[0-9]{2}T[0-9]{2}:[0-9]{2}:[0-9]{2}$regex_timezone\",\"recv_real_ns\":[1-9][0-9]*,\"recv_mono\":[1-9][0-9]+\.[0-9]{9},\"sent_real\":\"[0-9]{4}-[0-9]{2}-[0-9]{2}T[0-9]{2}:[0-9]{2}:[0-9]{2}$regex_timezone\",\"sent_real_ns\":[1-9][0-9]*,\"sent_mono\":[1-9][0-9]+\.[0-9]{9},\"tag\":\"[[:print:]]*\",\"msg\":\"[[:print:]]*\"\}$/1/g"
elif [ "$type" = "logger" ]; then
- REGEX="s/^\{\"priority\":\"(verbose|debug|info|warning|error|fatal|silent)\",\"pid\":[1-9][0-9]*,\"tid\":[1-9][0-9]*,\"sent_real\":\"[0-9]{4}-[0-9]{2}-[0-9]{2}T[0-9]{2}:[0-9]{2}:[0-9]{2}$regex_timezone\",\"tag\":\"[[:print:]]*\",\"msg\":\"[[:print:]]*\"\}$/1/g"
+ REGEX="s/^\{\"priority\":\"(verbose|debug|info|warning|error|fatal|silent)\",\"pid\":[1-9][0-9]*,\"tid\":[1-9][0-9]*,\"sent_real\":\"[0-9]{4}-[0-9]{2}-[0-9]{2}T[0-9]{2}:[0-9]{2}:[0-9]{2}$regex_timezone\",\"sent_real_ns\":[1-9][0-9]*,\"tag\":\"[[:print:]]*\",\"msg\":\"[[:print:]]*\"\}$/1/g"
else # zero-copy
REGEX="s/^\{\"priority\":\"(verbose|debug|info|warning|error|fatal|silent)\",\"pid\":[1-9][0-9]*,\"tid\":[1-9][0-9]*,\"sent_mono\":[1-9][0-9]+\.[0-9]{9},\"tag\":\"[[:print:]]*\",\"msg\":\"[[:print:]]*\"\}$/1/g"
fi
dlogutil -db kmsg -v raw | grep -Fm1 "$last_dmesg" >/dev/null && ok || fail
fi
- LOG_DETAILS="testing if pid filtering works"
- dlogsend -b main -t DLOG_TESTSUITE pidTEST &
- sleep 1
- line=$(dlogutil -v raw -d --pid $!)
- [ "$line" = "pidTEST" ] && ok || fail
+ dlog_test_tid_filtering_secure_logging $type
+fi
- LOG_DETAILS="testing if tid filtering works"
- dlogsend -b main -t DLOG_TESTSUITE tidTEST &
- sleep 1
- line=$(dlogutil -v raw -d --tid $!) #dlogsend is a single threaded app so tid is the same as pid
- [ "$line" = "tidTEST" ] && ok || fail
+DLOG_CONFIG_PATH="@datadir@/dlog-$type.conf.test"
- mv $DLOG_CONFIG_PATH $DLOG_CONFIG_PATH.1
- LOG_DETAILS="testing if secure logging works (1/2)"
- grep -v enable_secure_logs $DLOG_CONFIG_PATH.1 > $DLOG_CONFIG_PATH
- echo "enable_secure_logs=1" >> $DLOG_CONFIG_PATH
- dlogutil -c
- dlogsend -zb main -t DLOG_TESTSUITE secure &
- sleep 1
- dlogsend -b main -t DLOG_TESTSUITE insecure &
- sleep 1
- line=$(dlogutil -v raw -d | head -n1)
- [ "$line" = "secure" ] && ok || fail
- LOG_DETAILS="testing if secure logging works (2/2)"
- grep -v enable_secure_logs $DLOG_CONFIG_PATH.1 > $DLOG_CONFIG_PATH
- echo "enable_secure_logs=0" >> $DLOG_CONFIG_PATH
- dlogutil -c
- dlogsend -zb main -t DLOG_TESTSUITE secure &
- sleep 1
- dlogsend -b main -t DLOG_TESTSUITE insecure &
- sleep 1
- line=$(dlogutil -v raw -d | head -n1)
- [ "$line" = "insecure" ] && ok || fail
- mv $DLOG_CONFIG_PATH.1 $DLOG_CONFIG_PATH
-fi
+dlog_logger -t 0 &
+LOGGER=$!
+sleep 1
dlogsend -b main -t DLOG_TESTSUITE_TAG0 -pI tagTEST0
dlogsend -b main -t DLOG_TESTSUITE_TAG1 -pI tagTEST1
fi
LOG_DETAILS="testing if libdlogutil clears the buffer correctly"
+sleep 1 # make sure the earlier logs are handled so that they don't end up handled after the clear
test_libdlogutil clear $LIBDLOGUTIL_CORRECT_PID $type && ok || fail
if [ "$(date +%Y)" -le 2000 ]; then
DLOG_PREV_PATH=$DLOG_CONFIG_PATH
-LOG_DETAILS="testing if config has control over redirecting to stdout (1/3)"
-DLOG_CONFIG_PATH="@datadir@/dlog-$type.conf.stdout_enable.1"
-
-test_config_redirect 1 1 1 1 && ok || fail
-
-LOG_DETAILS="testing if config has control over redirecting to stdout (2/3)"
-DLOG_CONFIG_PATH="@datadir@/dlog-$type.conf.stdout_enable.2"
-test_config_redirect 0 0 1 1 && ok || fail
-
-LOG_DETAILS="testing if config has control over redirecting to stdout (3/3)"
-DLOG_CONFIG_PATH="@datadir@/dlog-$type.conf.stdout_enable.3"
-test_config_redirect 1 1 0 0 && ok || fail
+dlog_test_stdout_redirect $type
DLOG_CONFIG_PATH=$DLOG_PREV_PATH
if [ "$quick" -ne 1 ]; then
if [ "$type" != "zero-copy" ]; then # Backend autodection and logger daemon stuff don't really work on zero-copy
- PREAUTODETECT_CONFIG_PATH=$DLOG_CONFIG_PATH
- DLOG_CONFIG_PATH="@datadir@/dlog-$type.conf.autodetect"
- kill $LOGGER > /dev/null
- sleep 1
- if [ "$type" = "logger" ]; then
- dlogutil -cb main
- fi
- dlog_logger -t 0 &
- LOGGER=$!
- sleep 1
-
- LOG_DETAILS="testing if backend autodetection works properly (1/2)"
- dlogsend -b main -t DLOG_AUTODETECT "xd" && ok || fail
- sleep 1
-
- DLOG_CONFIG_PATH=$PREAUTODETECT_CONFIG_PATH
- LOG_DETAILS="testing if backend autodetection works properly (2/2)"
- [ "$(dlogutil -db main -v raw)" = "xd" ] && ok || fail
-
kill $LOGGER > /dev/null
sleep 1
- rm "$TESTDIR"/test*
- dlog_logger -t 0 &
- LOGGER=$!
- sleep 1
-
- dlogsend -b main -t DLOG_LOGGER_TEST0 -c 100 "hi"
- sleep 1
- LOG_DETAILS="testing if logger daemon persistent logging works (1/3)"
- [ "$(grep -c DLOG_LOGGER_TEST0 "$TESTDIR"/test0)" -eq 100 ] && ok || fail
- LOG_DETAILS="testing if logger daemon persistent logging works (2/3)"
- [ "$(grep -c DLOG_LOGGER_TEST0 "$TESTDIR"/test1)" -eq 100 ] && ok || fail
- LOG_DETAILS="testing if logger daemon persistent logging works (3/3)"
- [ "$(grep -c DLOG_LOGGER_TEST0 "$TESTDIR"/test2)" -eq 0 ] && ok || fail
-
- dlogsend -b main -t DLOG_LOGGER_TEST1 -c 500000 "hi"
- sleep 1
- RESULT=$(du -c "$TESTDIR"/test0* | tail -n 1 | cut -f 1)
- LOG_DETAILS="testing if logger daemon log rotating works (1/2)"
- [ "$RESULT" -gt 4096 ] && ok || fail # Min 4 MB
- LOG_DETAILS="testing if logger daemon log rotating works (2/2)"
- [ "$RESULT" -lt 6144 ] && ok || fail # Max 6 MB
-
- dlogutil -cb main
- kill $LOGGER > /dev/null
- sleep 1
- rm "$TESTDIR"/test0*
- dlog_logger -t 5 -b 100000 &
- LOGGER=$!
- sleep 1
-
- dlogsend -b main -t DLOG_LOGGER_TEST2 -c 100 "hi"
- sleep 1
- LOG_DETAILS="testing if logger daemon buffering works (1/5)"
- [ "$(grep -c DLOG_LOGGER_TEST2 "$TESTDIR"/test0)" -eq 0 ] && ok || fail
-
- sleep 6
- LOG_DETAILS="testing if logger daemon buffering works (2/5)"
- [ "$(grep -c DLOG_LOGGER_TEST2 "$TESTDIR"/test0)" -eq 100 ] && ok || fail
-
- dlogsend -b main -t DLOG_LOGGER_TEST3 -c 100 "hi"
- sleep 1
- LOG_DETAILS="testing if logger daemon buffering works (3/5)"
- [ "$(grep -c DLOG_LOGGER_TEST3 "$TESTDIR"/test0)" -eq 0 ] && ok || fail
- sleep 1
- kill $LOGGER > /dev/null
- LOGGER=-1
- sleep 1
- LOG_DETAILS="testing if logger daemon buffering works (4/5)"
- [ "$(grep -c DLOG_LOGGER_TEST3 "$TESTDIR"/test0)" -eq 100 ] && ok || fail
-
- dlogutil -cb main
-
- dlog_logger -t 10000 -b 100 &
- LOGGER=$!
- sleep 1
-
- dlogsend -b main -t DLOG_LOGGER_TEST4 -c 100 "hi"
- sleep 1
- LOG_DETAILS="testing if logger daemon buffering works (5/5)"
- [ "$(grep -c DLOG_LOGGER_TEST4 "$TESTDIR"/test0)" -gt 90 ] && ok || fail
-
- dlogutil -cb main
- kill $LOGGER > /dev/null
- sleep 1
- dlog_logger -t 0 &
- LOGGER=$!
- sleep 1
+ dlog_test_backend_autodetection $type
+ dlog_test_logger_buffering_logging $type
fi
+ dlog_logger -t 0 &
+ LOGGER=$!
+ sleep 1
+
LOG_DETAILS="testing if the library works with multithreaded app"
dlogutil -f $TESTDIR/dlog_mt_test &
MT_TEST=$!
LOG_DETAILS="testing if dlogutil --sort-by sorts correctly (${P}_mono)"
dlogutil -db main --sort-by "${P}_mono" -v json | sed -Ee "s/^.*\"${P}_mono\":([^,}]*).*\$/\\1/" | sort -c && ok || fail
LOG_DETAILS="testing if dlogutil --sort-by sorts correctly (${P}_real)"
- dlogutil -db main --sort-by "${P}_real" -v json | sed -Ee "s/^.*\"${P}_real\":\"([^\"]*)\".*\$/\\1/" | sort -c && ok || fail
+ dlogutil -db main --sort-by "${P}_real" -v json | sed -Ee "s/^.*\"${P}_real\":\"([^\"]*)\",\"${P}_real_ns\":([^,}]*).*\$/\\1 \2/" | sort -c -k1,1 -k2,2g && ok || fail
done
fi
projects / platform / core / system / dlog.git / blobdiff