#!/bin/bash
-CRYPTSETUP=../src/cryptsetup
+PS4='$LINENO:'
+[ -z "$CRYPTSETUP_PATH" ] && CRYPTSETUP_PATH=".."
+CRYPTSETUP=$CRYPTSETUP_PATH/cryptsetup
+CRYPTSETUP_RAW=$CRYPTSETUP
-CRYPTSETUP_VALGRIND=../src/.libs/cryptsetup
-CRYPTSETUP_LIB_VALGRIND=../lib/.libs
+CRYPTSETUP_VALGRIND=../.libs/cryptsetup
+CRYPTSETUP_LIB_VALGRIND=../.libs
DEV_NAME=dummy
DEV_NAME2=dummy2
DEV_NAME3=dummy3
ORIG_IMG=luks-test-orig
IMG=luks-test
+IMG10=luks-test-v10
HEADER_IMG=luks-header
KEY1=key1
KEY2=key2
KEY5=key5
KEYE=keye
+PWD0="compatkey"
+PWD1="93R4P4pIqAH8"
+PWD2="mymJeD8ivEhE"
+PWD3="ocMakf3fAcQO"
+PWDW="rUkL4RUryBom"
+VK_FILE="compattest_vkfile"
+
+FAST_PBKDF_OPT="--pbkdf pbkdf2 --pbkdf-force-iterations 1000"
LUKS_HEADER="S0-5 S6-7 S8-39 S40-71 S72-103 S104-107 S108-111 R112-131 R132-163 S164-167 S168-207 A0-591"
KEY_SLOT0="S208-211 S212-215 R216-247 A248-251 A251-255"
TEST_UUID="12345678-1234-1234-1234-123456789abc"
LOOPDEV=$(losetup -f 2>/dev/null)
+[ -f /etc/system-fips ] && FIPS_MODE=$(cat /proc/sys/crypto/fips_enabled 2>/dev/null)
function remove_mapping()
{
- [ -b /dev/mapper/$DEV_NAME3 ] && dmsetup remove $DEV_NAME3
- [ -b /dev/mapper/$DEV_NAME2 ] && dmsetup remove $DEV_NAME2
- [ -b /dev/mapper/$DEV_NAME ] && dmsetup remove $DEV_NAME
+ [ -b /dev/mapper/$DEV_NAME3 ] && dmsetup remove --retry $DEV_NAME3 >/dev/null 2>&1
+ [ -b /dev/mapper/$DEV_NAME2 ] && dmsetup remove --retry $DEV_NAME2 >/dev/null 2>&1
+ [ -b /dev/mapper/$DEV_NAME ] && dmsetup remove --retry $DEV_NAME >/dev/null 2>&1
losetup -d $LOOPDEV >/dev/null 2>&1
- rm -f $ORIG_IMG $IMG $KEY1 $KEY2 $KEY5 $KEYE $HEADER_IMG >/dev/null 2>&1
+ rm -f $ORIG_IMG $IMG $IMG10 $KEY1 $KEY2 $KEY5 $KEYE $HEADER_IMG $VK_FILE missing-file >/dev/null 2>&1
+ rmmod scsi_debug 2> /dev/null
+ scsi_debug_teardown $DEV
}
function force_uevent()
{
[ -n "$1" ] && echo "$1"
remove_mapping
- echo "FAILED"
+ echo "FAILED backtrace:"
+ while caller $frame; do ((frame++)); done
exit 2
}
+function fips_mode()
+{
+ [ -n "$FIPS_MODE" ] && [ "$FIPS_MODE" -gt 0 ]
+}
+
+function can_fail_fips()
+{
+ # Ignore this fail if running in FIPS mode
+ fips_mode || fail $1
+}
+
function skip()
{
[ -n "$1" ] && echo "$1"
- exit 0
+ remove_mapping
+ [ -z "$2" ] && exit $2
+ exit 77
}
function prepare()
{
- [ -b /dev/mapper/$DEV_NAME ] && dmsetup remove $DEV_NAME
+ [ -b /dev/mapper/$DEV_NAME ] && dmsetup remove --retry $DEV_NAME >/dev/null 2>&1
case "$2" in
+ file)
+ remove_mapping
+ dd if=/dev/zero of=$IMG bs=1k count=10000 >/dev/null 2>&1
+ sync
+ ;;
wipe)
remove_mapping
dd if=/dev/zero of=$IMG bs=1k count=10000 >/dev/null 2>&1
;;
new)
remove_mapping
- bzip2 -cd compatimage.img.bz2 > $IMG
+ xz -cd compatimage.img.xz > $IMG
+ # FIXME: switch to internal loop (no losetup at all)
+ echo "bad" | $CRYPTSETUP luksOpen --key-slot 0 --test-passphrase $IMG 2>&1 | \
+ grep "autoclear flag" && skip "WARNING: Too old kernel, test skipped."
losetup $LOOPDEV $IMG
+ xz -cd compatv10image.img.xz > $IMG10
;;
reuse | *)
if [ ! -e $IMG ]; then
- bzip2 -cd compatimage.img.bz2 > $IMG
+ xz -cd compatimage.img.xz > $IMG
losetup $LOOPDEV $IMG
fi
+ [ ! -e $IMG10 ] && xz -cd compatv10image.img.xz > $IMG10
;;
esac
if [ ! -e $KEY1 ]; then
- dd if=/dev/urandom of=$KEY1 count=1 bs=32 >/dev/null 2>&1
+ #dd if=/dev/urandom of=$KEY1 count=1 bs=32 >/dev/null 2>&1
+ echo -n $'\x48\xc6\x74\x4f\x41\x4e\x50\xc0\x79\xc2\x2d\x5b\x5f\x68\x84\x17' >$KEY1
+ echo -n $'\x9c\x03\x5e\x1b\x4d\x0f\x9a\x75\xb3\x90\x70\x32\x0a\xf8\xae\xc4'>>$KEY1
fi
if [ ! -e $KEY2 ]; then
check $1
}
+# $1 path to scsi debug bdev
+scsi_debug_teardown() {
+ local _tries=15;
+
+ while [ -b "$1" -a $_tries -gt 0 ]; do
+ rmmod scsi_debug 2> /dev/null
+ if [ -b "$1" ]; then
+ sleep .1
+ _tries=$((_tries-1))
+ fi
+ done
+
+ test ! -b "$1" || rmmod scsi_debug 2> /dev/null
+}
+
+function add_scsi_device() {
+ scsi_debug_teardown $DEV
+ modprobe scsi_debug $@ delay=0
+ if [ $? -ne 0 ] ; then
+ echo "This kernel seems to not support proper scsi_debug module, test skipped."
+ exit 77
+ fi
+
+ sleep 1
+ DEV="/dev/"$(grep -l -e scsi_debug /sys/block/*/device/model | cut -f4 -d /)
+ [ -b $DEV ] || fail "Cannot find $DEV."
+}
+
function valgrind_setup()
{
+ [ -n "$VALG" ] || return
which valgrind >/dev/null 2>&1 || fail "Cannot find valgrind."
[ ! -f $CRYPTSETUP_VALGRIND ] && fail "Unable to get location of cryptsetup executable."
export LD_LIBRARY_PATH="$CRYPTSETUP_LIB_VALGRIND:$LD_LIBRARY_PATH"
+ CRYPTSETUP=valgrind_run
+ CRYPTSETUP_RAW="./valg.sh ${CRYPTSETUP_VALGRIND}"
}
function valgrind_run()
{
- INFOSTRING="$(basename ${BASH_SOURCE[1]})-line-${BASH_LINENO[0]}" ./valg.sh ${CRYPTSETUP_VALGRIND} "$@"
+ export INFOSTRING="$(basename ${BASH_SOURCE[1]})-line-${BASH_LINENO[0]}"
+ $CRYPTSETUP_RAW "$@"
}
-[ $(id -u) != 0 ] && skip "WARNING: You must be root to run this test, test skipped."
-[ -z "$LOOPDEV" ] && skip "Cannot find free loop device, test skipped."
+function expect_run()
+{
+ export INFOSTRING="$(basename ${BASH_SOURCE[1]})-line-${BASH_LINENO[0]}"
+ expect "$@"
+}
-[ -n "$VALG" ] && valgrind_setup && CRYPTSETUP=valgrind_run
+export LANG=C
+valgrind_setup
-# LUKS tests
+# LUKS non-root-tests
+if [ $(id -u) != 0 ]; then
+ $CRYPTSETUP benchmark -c aes-xts-plain64 >/dev/null 2>&1 || \
+ skip "WARNING: Cannot run test without kernel userspace crypto API, test skipped."
+fi
+
+prepare "Image in file tests (root capabilities not required)" file
+echo "[1] format"
+echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $IMG $FAST_PBKDF_OPT || fail
+echo "[2] open"
+echo $PWD0 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
+[ $? -ne 2 ] && fail "luksOpen should return EPERM exit code"
+echo $PWD1 | $CRYPTSETUP luksOpen $IMG --test-passphrase || fail
+# test detached header --test-passphrase
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --header $HEADER_IMG $IMG || fail
+echo $PWD1 | $CRYPTSETUP open --test-passphrase $HEADER_IMG || fail
+rm -f $HEADER_IMG
+echo "[3] add key"
+echo $PWD1 | $CRYPTSETUP luksAddKey $IMG $FAST_PBKDF_OPT 2>/dev/null && fail
+echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $IMG $FAST_PBKDF_OPT || fail
+echo -e "$PWD0\n$PWD1" | $CRYPTSETUP luksAddKey $IMG $FAST_PBKDF_OPT 2>/dev/null && fail
+echo "[4] change key"
+echo -e "$PWD1\n$PWD0\n" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT $IMG || fail
+echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT $IMG 2>/dev/null && fail
+[ $? -ne 2 ] && fail "luksChangeKey should return EPERM exit code"
+echo "[5] remove key"
+# delete active keys PWD0, PWD2
+echo $PWD1 | $CRYPTSETUP luksRemoveKey $IMG 2>/dev/null && fail
+[ $? -ne 2 ] && fail "luksRemove should return EPERM exit code"
+echo $PWD0 | $CRYPTSETUP luksRemoveKey $IMG || fail
+echo $PWD2 | $CRYPTSETUP luksRemoveKey $IMG || fail
+# check if keys were deleted
+echo $PWD0 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
+[ $? -ne 1 ] && fail "luksOpen should return ENOENT exit code"
+echo $PWD2 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
+[ $? -ne 1 ] && fail "luksOpen should return ENOENT exit code"
+echo "[6] kill slot"
+# format new luks device with active keys PWD1, PWD2
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $IMG $FAST_PBKDF_OPT || fail
+echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $IMG $FAST_PBKDF_OPT || fail
+# deactivate keys by killing slots
+$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 0: ENABLED" || fail
+$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 1: ENABLED" || fail
+$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 2: DISABLED" || fail
+echo $PWD1 | $CRYPTSETUP -q luksKillSlot $IMG 0 2>/dev/null && fail
+echo $PWD2 | $CRYPTSETUP -q luksKillSlot $IMG 0 || fail
+$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 0: DISABLED" || fail
+echo $PWD1 | $CRYPTSETUP -q luksKillSlot $IMG 1 2>/dev/null && fail
+[ $? -ne 2 ] && fail "luksKill should return EPERM exit code"
+echo $PWD2 | $CRYPTSETUP -q luksKillSlot $IMG 1 || fail
+$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 1: DISABLED" || fail
+# check if keys were deactivated
+echo $PWD1 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
+echo $PWD2 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
+echo "[7] header backup"
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $IMG $FAST_PBKDF_OPT || fail
+$CRYPTSETUP luksHeaderBackup $IMG --header-backup-file $HEADER_IMG || fail
+echo $PWD1 | $CRYPTSETUP luksRemoveKey $IMG || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
+echo "[8] header restore"
+$CRYPTSETUP luksHeaderRestore -q $IMG --header-backup-file $HEADER_IMG || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $IMG --test-passphrase || fail
+echo "[9] luksDump"
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid $TEST_UUID $IMG $KEY1 || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $IMG -d $KEY1 || fail
+$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 0: ENABLED" || fail
+$CRYPTSETUP luksDump $IMG | grep -q $TEST_UUID || fail
+echo $PWDW | $CRYPTSETUP luksDump $IMG --dump-master-key 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksDump $IMG --dump-master-key | grep -q "MK dump:" || fail
+$CRYPTSETUP luksDump -q $IMG --dump-master-key -d $KEY1 | grep -q "MK dump:" || fail
+echo $PWD1 | $CRYPTSETUP luksDump -q $IMG --dump-master-key --master-key-file $VK_FILE >/dev/null || fail
+echo $PWD1 | $CRYPTSETUP luksDump -q $IMG --dump-master-key --master-key-file $VK_FILE 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --master-key-file $VK_FILE $IMG || fail
+
+echo "[10] uuid"
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid $TEST_UUID $IMG || fail
+$CRYPTSETUP -q luksUUID $IMG | grep -q $TEST_UUID || fail
+
+[ $(id -u) != 0 ] && skip "WARNING: You must be root to run this test, test skipped."
+[ -z "$LOOPDEV" ] && skip "WARNING: Cannot find free loop device, test skipped."
+# LUKS root-tests
prepare "[1] open - compat image - acceptance check" new
-echo "compatkey" | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+echo $PWD0 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
check_exists
ORG_SHA1=$(sha1sum -b /dev/mapper/$DEV_NAME | cut -f 1 -d' ')
[ "$ORG_SHA1" = 676062b66ebf36669dab705442ea0762dfc091b0 ] || fail
+$CRYPTSETUP -q luksClose $DEV_NAME || fail
+
+# Check it can be opened from header backup as well
+$CRYPTSETUP luksHeaderBackup $IMG --header-backup-file $HEADER_IMG || fail
+echo $PWD0 | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME --header $HEADER_IMG || fail
+check_exists
+$CRYPTSETUP -q luksClose $DEV_NAME || fail
+# Check restore
+$CRYPTSETUP luksHeaderRestore -q $IMG --header-backup-file $HEADER_IMG || fail
+
+# Repeat for V1.0 header - not aligned first keyslot
+echo $PWD0 | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME || fail
+check_exists
+ORG_SHA1=$(sha1sum -b /dev/mapper/$DEV_NAME | cut -f 1 -d' ')
+[ "$ORG_SHA1" = 51b48c2471a7593ceaf14dc5e66bca86ed05f6cc ] || fail
+$CRYPTSETUP -q luksClose $DEV_NAME || fail
+
+rm -f $HEADER_IMG
+$CRYPTSETUP luksHeaderBackup $IMG10 --header-backup-file $HEADER_IMG
+echo $PWD0 | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME --header $HEADER_IMG || fail
+check_exists
+$CRYPTSETUP -q luksClose $DEV_NAME || fail
prepare "[2] open - compat image - denial check" new
-echo "wrongkey" | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+echo $PWDW | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+echo $PWDW | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME 2>/dev/null && fail
check
# All headers items and first key material section must change
prepare "[3] format" wipe
-echo "key0" | $CRYPTSETUP -i 1000 -c aes-cbc-essiv:sha256 -s 128 luksFormat $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP -i 1000 -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks1 $LOOPDEV || fail
check "$LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0"
prepare "[4] format using hash sha512" wipe
-echo "key0" | $CRYPTSETUP -i 1000 -h sha512 -c aes-cbc-essiv:sha256 -s 128 luksFormat $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP -i 1000 -h sha512 -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks1 $LOOPDEV || fail
check "$LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0"
prepare "[5] open"
-echo "key0" | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --without-activation || fail
-echo "blah" | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --without-activation 2>/dev/null && fail
-echo "key0" | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase || fail
+echo $PWDW | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
check_exists
# Key Slot 1 and key material section 1 must change, the rest must not.
prepare "[6] add key"
-echo -e "key0\nkey1" | $CRYPTSETUP luksAddKey $LOOPDEV || fail
+echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $LOOPDEV || fail
check "$KEY_SLOT1 $KEY_MATERIAL1"
-echo "key1" | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
# Unsuccessful Key Delete - nothing may change
prepare "[7] unsuccessful delete"
-echo "invalid" | $CRYPTSETUP luksKillSlot $LOOPDEV 1 2>/dev/null && fail
+echo $PWDW | $CRYPTSETUP luksKillSlot $LOOPDEV 1 2>/dev/null && fail
$CRYPTSETUP -q luksKillSlot $LOOPDEV 8 2>/dev/null && fail
$CRYPTSETUP -q luksKillSlot $LOOPDEV 7 2>/dev/null && fail
check
prepare "[8] successful delete"
$CRYPTSETUP -q luksKillSlot $LOOPDEV 1 || fail
check "$KEY_SLOT1 $KEY_MATERIAL1_EXT"
-echo "key1" | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2> /dev/null && fail
-echo "key0" | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2> /dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
# Key Slot 1 and key material section 1 must change, the rest must not
prepare "[9] add key test for key files"
-echo "key0" | $CRYPTSETUP luksAddKey $LOOPDEV $KEY1 || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV $KEY1 || fail
check "$KEY_SLOT1 $KEY_MATERIAL1"
$CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail
prepare "[10] delete key test with key1 as remaining key"
$CRYPTSETUP -d $KEY1 luksKillSlot $LOOPDEV 0 || fail
check "$KEY_SLOT0 $KEY_MATERIAL0_EXT"
-echo "key0" | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail
# Delete last slot
prepare "[11] delete last key" wipe
-echo "key0" | $CRYPTSETUP luksFormat $LOOPDEV || fail
-echo "key0" | $CRYPTSETUP luksKillSlot $LOOPDEV 0 || fail
-echo "key0" | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $LOOPDEV $FAST_PBKDF_OPT || fail
+echo $PWD1 | $CRYPTSETUP luksKillSlot $LOOPDEV 0 || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
# Format test for ESSIV, and some other parameters.
prepare "[12] parameter variation test" wipe
-$CRYPTSETUP -q -i 1000 -c aes-cbc-essiv:sha256 -s 128 luksFormat $LOOPDEV $KEY1 || fail
+$CRYPTSETUP -q -i 1000 -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks1 $LOOPDEV $KEY1 || fail
check "$LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0"
$CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail
prepare "[13] open/close - stacked devices" wipe
-echo "key0" | $CRYPTSETUP -q luksFormat $LOOPDEV || fail
-echo "key0" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
-echo "key0" | $CRYPTSETUP -q luksFormat /dev/mapper/$DEV_NAME || fail
-echo "key0" | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $LOOPDEV $FAST_PBKDF_OPT || fail
+echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 /dev/mapper/$DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail
$CRYPTSETUP -q luksClose $DEV_NAME2 || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
prepare "[14] format/open - passphrase on stdin & new line" wipe
# stdin defined by "-" must take even newline
-#echo -n $'foo\nbar' | $CRYPTSETUP -q luksFormat $LOOPDEV - || fail
-echo -n $'foo\nbar' | $CRYPTSETUP -q --key-file=- luksFormat $LOOPDEV || fail
-echo -n $'foo\nbar' | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail
+#echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksFormat $LOOPDEV - || fail
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q --key-file=- luksFormat --type luks1 $LOOPDEV || fail
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
-echo -n $'foo\nbar' | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
# now also try --key-file
-echo -n $'foo\nbar' | $CRYPTSETUP -q luksFormat $LOOPDEV --key-file=- || fail
-echo -n $'foo\nbar' | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q luksFormat --type luks1 $LOOPDEV --key-file=- || fail
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
# process newline if from stdin
-echo -n $'foo\nbar' | $CRYPTSETUP -q luksFormat $LOOPDEV || fail
-echo 'foo' | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q luksFormat --type luks1 $LOOPDEV || fail
+echo "$PWD1" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
prepare "[15] UUID - use and report provided UUID" wipe
-echo "key0" | $CRYPTSETUP -q luksFormat --uuid blah $LOOPDEV 2>/dev/null && fail
-echo "key0" | $CRYPTSETUP -q luksFormat --uuid $TEST_UUID $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid blah $LOOPDEV 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid $TEST_UUID $LOOPDEV || fail
tst=$($CRYPTSETUP -q luksUUID $LOOPDEV)
[ "$tst"x = "$TEST_UUID"x ] || fail
-echo "key0" | $CRYPTSETUP -q luksFormat $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV || fail
$CRYPTSETUP -q luksUUID --uuid $TEST_UUID $LOOPDEV || fail
tst=$($CRYPTSETUP -q luksUUID $LOOPDEV)
[ "$tst"x = "$TEST_UUID"x ] || fail
prepare "[16] luksFormat" wipe
-echo "key0" | $CRYPTSETUP -q luksFormat --master-key-file /dev/urandom $LOOPDEV || fail
-echo "key0" | $CRYPTSETUP -q luksFormat --master-key-file /dev/urandom $LOOPDEV -d $KEY1 || fail
-$CRYPTSETUP -q luksFormat --master-key-file /dev/urandom -s 256 --uuid $TEST_UUID $LOOPDEV $KEY1 || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --master-key-file /dev/urandom $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --master-key-file /dev/urandom $LOOPDEV -d $KEY1 || fail
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --master-key-file /dev/urandom -s 256 --uuid $TEST_UUID $LOOPDEV $KEY1 || fail
$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
# open by UUID
$CRYPTSETUP luksOpen -d $KEY1 UUID=$TEST_UUID $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
# empty keyfile
-$CRYPTSETUP -q luksFormat $LOOPDEV $KEYE || fail
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEYE || fail
$CRYPTSETUP luksOpen -d $KEYE $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
# open by volume key
-echo "key0" | $CRYPTSETUP -q luksFormat -s 256 --master-key-file $KEY1 $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT -s 256 --master-key-file $KEY1 $LOOPDEV || fail
$CRYPTSETUP luksOpen --master-key-file /dev/urandom $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP luksOpen --master-key-file $KEY1 $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
+# unsupported pe-keyslot encryption
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT -s 128 --keyslot-cipher "aes-cbc-plain" $LOOPDEV 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT -s 128 --keyslot-key-size 256 $LOOPDEV 2>/dev/null && fail
prepare "[17] AddKey volume key, passphrase and keyfile" wipe
# masterkey
-echo "key0" | $CRYPTSETUP -q luksFormat $LOOPDEV --master-key-file /dev/zero --key-slot 3 || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --master-key-file /dev/zero --key-slot 3 || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: ENABLED" || fail
-echo "key1" | $CRYPTSETUP luksAddKey $LOOPDEV --master-key-file /dev/zero --key-slot 4 || fail
+echo $PWD2 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --master-key-file /dev/zero --key-slot 4 || fail
+echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 4 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 4: ENABLED" || fail
-echo "key2" | $CRYPTSETUP luksAddKey $LOOPDEV --master-key-file /dev/null --key-slot 5 2>/dev/null && fail
-# [0]key0 [1]key1 [2]$KEY1/1 [3]$KEY1 [4]$KEY2
-$CRYPTSETUP -q luksFormat $LOOPDEV $KEY1 --key-slot 3 || fail
+echo $PWD3 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --master-key-file /dev/null --key-slot 5 2>/dev/null && fail
+$CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --master-key-file /dev/zero --key-slot 5 $KEY1 || fail
+$CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 5 -d $KEY1 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: ENABLED" || fail
+
+# special "-" handling
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 3 || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 - || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - --test-passphrase || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d - $KEY2 || fail
+$CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - -d $KEY1 --test-passphrase 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d $KEY1 -d $KEY1 --test-passphrase 2>/dev/null && fail
+
+# [0]PWD1 [1]PWD2 [2]$KEY1/1 [3]$KEY1 [4]$KEY2
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 3 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: ENABLED" || fail
-$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 --key-slot 3 2>/dev/null && fail
+$CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 3 2>/dev/null && fail
# keyfile/keyfile
-$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 --key-slot 4 || fail
+$CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 4 || fail
+$CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase --key-slot 4 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 4: ENABLED" || fail
# passphrase/keyfile
-echo "key0" | $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 --key-slot 0 || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 --key-slot 0 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: ENABLED" || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 0 || fail
# passphrase/passphrase
-echo -e "key0\nkey1\n" | $CRYPTSETUP luksAddKey $LOOPDEV --key-slot 1 || fail
+echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --key-slot 1 || fail
+echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: ENABLED" || fail
# keyfile/passphrase
-echo -e "key1\n" | $CRYPTSETUP luksAddKey $LOOPDEV $KEY1 --key-slot 2 --new-keyfile-size 1 || fail
+echo -e "$PWD2\n" | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 2 --new-keyfile-size 3 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 2: ENABLED" || fail
prepare "[18] RemoveKey passphrase and keyfile" reuse
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: DISABLED" || fail
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 2>/dev/null && fail
+$CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 $KEY1 --key-slot 3 2>/dev/null || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: ENABLED" || fail
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 --keyfile-size 1 2>/dev/null && fail
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 4: DISABLED" || fail
+# if password or keyfile is provided, batch mode must not suppress it
+echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 2>/dev/null && fail
+echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 -q 2>/dev/null && fail
+echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 --key-file=- 2>/dev/null && fail
+echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 --key-file=- -q 2>/dev/null && fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 2: ENABLED" || fail
# kill slot using passphrase from 1
-echo "key1" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 || fail
+echo $PWD2 | $CRYPTSETUP luksKillSlot $LOOPDEV 2 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 2: DISABLED" || fail
+# kill slot with redirected stdin
+$CRYPTSETUP luksKillSlot $LOOPDEV 3 </dev/null 2>/dev/null || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: DISABLED" || fail
# remove key0 / slot 0
-echo "key0" | $CRYPTSETUP luksRemoveKey $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: DISABLED" || fail
# last keyslot, in batch mode no passphrase needed...
$CRYPTSETUP luksKillSlot -q $LOOPDEV 1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: DISABLED" || fail
prepare "[19] create & status & resize" wipe
-echo "key0" | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash xxx 2>/dev/null && fail
-echo "key0" | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --cipher aes-cbc-essiv:sha256 --offset 3 --skip 4 --readonly || fail
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash xxx 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --cipher aes-cbc-essiv:sha256 --offset 3 --skip 4 --readonly || fail
$CRYPTSETUP -q status $DEV_NAME | grep "offset:" | grep -q "3 sectors" || fail
$CRYPTSETUP -q status $DEV_NAME | grep "skipped:" | grep -q "4 sectors" || fail
$CRYPTSETUP -q status $DEV_NAME | grep "mode:" | grep -q "readonly" || fail
$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
$CRYPTSETUP -q resize $DEV_NAME || fail
$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "19997 sectors" || fail
+$CRYPTSETUP -q resize $DEV_NAME --device-size 1M || fail
+$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail
+$CRYPTSETUP -q resize $DEV_NAME --device-size 512k --size 1023 >/dev/null 2>&1 && fail
+$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail
+$CRYPTSETUP -q resize $DEV_NAME --device-size 513 >/dev/null 2>&1 && fail
+$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail
+# Resize underlying loop device as well
+truncate -s 16M $IMG || fail
+$CRYPTSETUP -q resize $DEV_NAME || fail
+$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "32765 sectors" || fail
$CRYPTSETUP -q remove $DEV_NAME || fail
$CRYPTSETUP -q status $DEV_NAME >/dev/null && fail
-echo "key0" | $CRYPTSETUP create $DEV_NAME --hash sha1 $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha1 $LOOPDEV || fail
$CRYPTSETUP -q remove $DEV_NAME || fail
-echo "key0" | $CRYPTSETUP -q create $DEV_NAME --hash sha1 $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP -q create $DEV_NAME --hash sha1 $LOOPDEV || fail
$CRYPTSETUP -q remove $DEV_NAME || fail
-echo "key0" | $CRYPTSETUP -q create $DEV_NAME --hash sha1 --size 100 $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP -q create $DEV_NAME --hash sha1 --size 100 $LOOPDEV || fail
$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
$CRYPTSETUP -q remove $DEV_NAME || fail
+# 4k sector resize (if kernel supports it)
+echo $PWD1 | $CRYPTSETUP -q open --type plain $LOOPDEV $DEV_NAME --sector-size 4096 --size 8 >/dev/null 2>&1
+if [ $? -eq 0 ] ; then
+ $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "8 sectors" || fail
+ $CRYPTSETUP -q resize $DEV_NAME --size 16 || fail
+ $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "16 sectors" || fail
+ $CRYPTSETUP -q resize $DEV_NAME --size 9 2>/dev/null && fail
+ $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "16 sectors" || fail
+ $CRYPTSETUP -q resize $DEV_NAME --device-size 4608 2>/dev/null && fail
+ $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "16 sectors" || fail
+ $CRYPTSETUP -q remove $DEV_NAME || fail
+fi
+# Resize not aligned to logical block size
+add_scsi_device dev_size_mb=32 sector_size=4096
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha1 $DEV || fail
+OLD_SIZE=$($CRYPTSETUP status $DEV_NAME | grep "^ \+size:" | sed 's/.* \([0-9]\+\) .*/\1/')
+$CRYPTSETUP resize $DEV_NAME -b 7 2> /dev/null && fail
+dmsetup info $DEV_NAME | grep -q SUSPENDED && fail
+NEW_SIZE=$($CRYPTSETUP status $DEV_NAME | grep "^ \+size:" | sed 's/.* \([0-9]\+\) .*/\1/')
+test $OLD_SIZE -eq $NEW_SIZE || fail
+$CRYPTSETUP close $DEV_NAME || fail
+# Add check for unaligned plain crypt activation
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha1 $DEV -b 7 2>/dev/null && fail
+$CRYPTSETUP status $DEV_NAME >/dev/null 2>&1 && fail
# verify is ignored on non-tty input
-echo "key0" | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --verify-passphrase 2>/dev/null || fail
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --verify-passphrase 2>/dev/null || fail
$CRYPTSETUP -q remove $DEV_NAME || fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 --key-size 255 2>/dev/null && fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 --key-size -1 2>/dev/null && fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 || fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 2>/dev/null && fail
$CRYPTSETUP create $DEV_NAME2 $LOOPDEV -d $KEY1 2>/dev/null && fail
-echo "key0" | $CRYPTSETUP -q luksFormat $LOOPDEV 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $LOOPDEV 2>/dev/null && fail
$CRYPTSETUP remove $DEV_NAME || fail
-echo "key0" | $CRYPTSETUP -q luksFormat $LOOPDEV || fail
-echo "key0" | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
-echo "key0" | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME2 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME2 2>/dev/null && fail
$CRYPTSETUP luksClose $DEV_NAME || fail
prepare "[21] luksDump" wipe
-echo "key0" | $CRYPTSETUP -q luksFormat --uuid $TEST_UUID $LOOPDEV $KEY1 || fail
-echo "key0" | $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid $TEST_UUID $LOOPDEV $KEY1 || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: ENABLED" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q $TEST_UUID || fail
-echo "bad" | $CRYPTSETUP luksDump $LOOPDEV --dump-master-key 2>/dev/null && fail
-echo "key0" | $CRYPTSETUP luksDump $LOOPDEV --dump-master-key | grep -q "MK dump:" || fail
+echo $PWDW | $CRYPTSETUP luksDump $LOOPDEV --dump-master-key 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksDump $LOOPDEV --dump-master-key | grep -q "MK dump:" || fail
$CRYPTSETUP luksDump -q $LOOPDEV --dump-master-key -d $KEY1 | grep -q "MK dump:" || fail
+echo $PWD1 | $CRYPTSETUP luksDump -q $LOOPDEV --dump-master-key --master-key-file $VK_FILE > /dev/null || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --master-key-file $VK_FILE $LOOPDEV || fail
prepare "[22] remove disappeared device" wipe
dmsetup create $DEV_NAME --table "0 5000 linear $LOOPDEV 2" || fail
-echo "key0" | $CRYPTSETUP -q -i 0 luksFormat /dev/mapper/$DEV_NAME || fail
-echo "key0" | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail
+echo $PWD1 | $CRYPTSETUP -q $FAST_PBKDF_OPT luksFormat --type luks1 /dev/mapper/$DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail
# underlying device now returns error but node is still present
dmsetup load $DEV_NAME --table "0 5000 error" || fail
dmsetup resume $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME2 || fail
-dmsetup remove $DEV_NAME || fail
+dmsetup remove --retry $DEV_NAME || fail
prepare "[23] ChangeKey passphrase and keyfile" wipe
# [0]$KEY1 [1]key0
-$CRYPTSETUP -q luksFormat $LOOPDEV $KEY1 --key-slot 0 || fail
-echo "key0" | $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 --key-slot 1 || fail
+$CRYPTSETUP -q luksFormat --type luks1 $LOOPDEV $KEY1 $FAST_PBKDF_OPT --key-slot 0 || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 --key-slot 1 || fail
# keyfile [0] / keyfile [0]
-$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 --key-slot 0 || fail
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 0 || fail
# passphrase [1] / passphrase [1]
-echo -e "key0\nkey1\n" | $CRYPTSETUP luksChangeKey $LOOPDEV --key-slot 1 || fail
+echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT --key-slot 1 || fail
# keyfile [0] / keyfile [new]
-$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY2 $KEY1 || fail
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 $KEY1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: DISABLED" || fail
# passphrase [1] / passphrase [new]
-echo -e "key1\nkey0\n" | $CRYPTSETUP luksChangeKey $LOOPDEV || fail
+echo -e "$PWD2\n$PWD1\n" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT $LOOPDEV || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: DISABLED" || fail
# use all slots
-$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -i 1 || fail
-$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -i 1 || fail
-$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -i 1 || fail
-$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -i 1 || fail
-$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -i 1 || fail
-$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -i 1 || fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
# still allows replace
-$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 || fail
-$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 2>/dev/null && fail
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 || fail
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 2>/dev/null && fail
prepare "[24] Keyfile limit" wipe
-$CRYPTSETUP -q luksFormat -i1 $LOOPDEV $KEY1 --key-slot 0 -l 13 || fail
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 0 -l 13 || fail
$CRYPTSETUP --key-file=$KEY1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l 0 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l 13 luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksClose $DEV_NAME || fail
-$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 2>/dev/null && fail
-$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -l 14 2>/dev/null && fail
-$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -l -1 2>/dev/null && fail
-$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -i1 -l 13 --new-keyfile-size 12 || fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT 2>/dev/null && fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 14 2>/dev/null && fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l -1 2>/dev/null && fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 13 --new-keyfile-size 12 || fail
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 2>/dev/null && fail
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 -l 12 || fail
-$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 2>/dev/null && fail
-$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 -l 14 2>/dev/null && fail
-$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 -i1 -l 13 || fail
+$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT 2>/dev/null && fail
+$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 14 2>/dev/null && fail
+$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 13 || fail
# -l is ignored for stdin if _only_ passphrase is used
-echo "key0" | $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY2 -i1 || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY2 $FAST_PBKDF_OPT || fail
# this is stupid, but expected
-echo "key0" | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 2 2>/dev/null && fail
-echo "key01" | $CRYPTSETUP luksRemoveKey $LOOPDEV -d 4 2>/dev/null && fail
-echo -e "key0\n" | $CRYPTSETUP luksRemoveKey $LOOPDEV -d- -l 4 || fail
+echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 11 2>/dev/null && fail
+echo $PWDW"0" | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 12 2>/dev/null && fail
+echo -e "$PWD1\n" | $CRYPTSETUP luksRemoveKey $LOOPDEV -d- -l 12 || fail
# offset
-$CRYPTSETUP -q luksFormat -i1 $LOOPDEV $KEY1 --key-slot 0 -l 13 --keyfile-offset 16 || fail
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 0 -l 13 --keyfile-offset 16 || fail
$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 15 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 16 luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksClose $DEV_NAME || fail
-$CRYPTSETUP luksAddKey $LOOPDEV -i1 -d $KEY1 -l 13 --keyfile-offset 16 $KEY2 --new-keyfile-offset 1 || fail
+$CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 -l 13 --keyfile-offset 16 $KEY2 --new-keyfile-offset 1 || fail
$CRYPTSETUP --key-file=$KEY2 --keyfile-offset 11 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY2 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksClose $DEV_NAME || fail
-$CRYPTSETUP luksChangeKey $LOOPDEV -i1 -d $KEY2 --keyfile-offset 1 $KEY2 --new-keyfile-offset 0 || fail
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 --keyfile-offset 1 $KEY2 --new-keyfile-offset 0 || fail
$CRYPTSETUP luksOpen -d $KEY2 $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksClose $DEV_NAME || fail
+# large device with keyfile
+echo -e '0 10000000 error'\\n'10000000 1000000 zero' | dmsetup create $DEV_NAME2 || fail
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV /dev/mapper/$DEV_NAME2 -l 13 --keyfile-offset 5120000000 || fail
+$CRYPTSETUP --key-file=/dev/mapper/$DEV_NAME2 -l 13 --keyfile-offset 5119999999 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=/dev/mapper/$DEV_NAME2 -l 13 --keyfile-offset 5120000000 luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksClose $DEV_NAME || fail
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d /dev/mapper/$DEV_NAME2 \
+ --keyfile-offset 5120000000 -l 13 /dev/mapper/$DEV_NAME2 --new-keyfile-offset 5120000001 --new-keyfile-size 15 || fail
+dmsetup remove --retry $DEV_NAME2
prepare "[25] Create shared segments" wipe
-echo "key0" | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --offset 0 --size 256 || fail
-echo "key0" | $CRYPTSETUP create $DEV_NAME2 $LOOPDEV --hash sha1 --offset 512 --size 256 2>/dev/null && fail
-echo "key0" | $CRYPTSETUP create $DEV_NAME2 $LOOPDEV --hash sha1 --offset 512 --size 256 --shared || fail
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --offset 0 --size 256 || fail
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME2 $LOOPDEV --hash sha1 --offset 512 --size 256 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME2 $LOOPDEV --hash sha1 --offset 512 --size 256 --shared || fail
$CRYPTSETUP -q remove $DEV_NAME2 || fail
$CRYPTSETUP -q remove $DEV_NAME || fail
prepare "[26] Suspend/Resume" wipe
# only LUKS is supported
-echo "key0" | $CRYPTSETUP create $DEV_NAME --hash sha1 $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha1 $LOOPDEV || fail
$CRYPTSETUP luksSuspend $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP -q remove $DEV_NAME || fail
$CRYPTSETUP luksSuspend $DEV_NAME 2>/dev/null && fail
# LUKS
-echo "key0" | $CRYPTSETUP -q luksFormat $LOOPDEV || fail
-echo "key0" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksSuspend $DEV_NAME || fail
+$CRYPTSETUP -q status $DEV_NAME | grep -q "(suspended)" || fail
$CRYPTSETUP -q resize $DEV_NAME 2>/dev/null && fail
-echo "xxx" | $CRYPTSETUP luksResume $DEV_NAME -T 1 2>/dev/null && fail
-echo "key0" | $CRYPTSETUP luksResume $DEV_NAME || fail
+echo $PWDW | $CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail
+[ $? -ne 2 ] && fail "luksResume should return EPERM exit code"
+echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME || fail
+$CRYPTSETUP -q luksClose $DEV_NAME || fail
+echo | $CRYPTSETUP -q luksFormat -c null $FAST_PBKDF_OPT --type luks1 $LOOPDEV || fail
+echo | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksSuspend $DEV_NAME || fail
+$CRYPTSETUP -q status $DEV_NAME | grep -q "(suspended)" || fail
+echo | $CRYPTSETUP luksResume $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail
prepare "[27] luksOpen with specified key slot number" wipe
# first, let's try passphrase option
-echo "key5" | $CRYPTSETUP luksFormat -S 5 $LOOPDEV || fail
+echo $PWD3 | $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF_OPT -S 5 $LOOPDEV || fail
check $LUKS_HEADER $KEY_SLOT5 $KEY_MATERIAL5
-echo "key5" | $CRYPTSETUP luksOpen -S 4 $LOOPDEV $DEV_NAME && fail
+echo $PWD3 | $CRYPTSETUP luksOpen -S 4 $LOOPDEV $DEV_NAME 2>/dev/null && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
-echo "key5" | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME || fail
+echo $PWD3 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME || fail
check_exists
$CRYPTSETUP luksClose $DEV_NAME || fail
-echo -e "key5\nkey0" | $CRYPTSETUP luksAddKey -S 0 $LOOPDEV || fail
+echo -e "$PWD3\n$PWD1" | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 0 $LOOPDEV || fail
check $LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0
-echo "key5" | $CRYPTSETUP luksOpen -S 0 $LOOPDEV $DEV_NAME && fail
+echo $PWD3 | $CRYPTSETUP luksOpen -S 0 $LOOPDEV $DEV_NAME 2>/dev/null && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
-echo "key0" | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME && fail
+echo $PWD1 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME 2>/dev/null && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
# second, try it with keyfiles
-$CRYPTSETUP luksFormat -q -S 5 -d $KEY5 $LOOPDEV || fail
+$CRYPTSETUP luksFormat --type luks1 -q -S 5 -d $KEY5 $LOOPDEV || fail
check $LUKS_HEADER $KEY_SLOT5 $KEY_MATERIAL5
-$CRYPTSETUP luksAddKey -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail
+$CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail
check $LUKS_HEADER $KEY_SLOT1 $KEY_MATERIAL1
$CRYPTSETUP luksOpen -S 5 -d $KEY5 $LOOPDEV $DEV_NAME || fail
check_exists
$CRYPTSETUP luksClose $DEV_NAME || fail
-$CRYPTSETUP luksOpen -S 1 -d $KEY5 $LOOPDEV $DEV_NAME && fail
+$CRYPTSETUP luksOpen -S 1 -d $KEY5 $LOOPDEV $DEV_NAME 2>/dev/null && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
-$CRYPTSETUP luksOpen -S 5 -d $KEY1 $LOOPDEV $DEV_NAME && fail
+$CRYPTSETUP luksOpen -S 5 -d $KEY1 $LOOPDEV $DEV_NAME 2>/dev/null && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
prepare "[28] Detached LUKS header" wipe
-dd if=/dev/zero of=$HEADER_IMG bs=1M count=4 >/dev/null 2>&1
-echo "key0" | $CRYPTSETUP luksFormat -i1 $LOOPDEV --header $HEADER_IMG || fail
-echo "key0" | $CRYPTSETUP luksFormat -i1 $LOOPDEV --header $HEADER_IMG --align-payload 0 || fail
-echo "key0" | $CRYPTSETUP luksOpen $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG || fail
+echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 1 >/dev/null 2>&1 && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 8192 || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 0 || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 8192 --offset 8192 >/dev/null 2>&1 && fail
+truncate -s 4096 $HEADER_IMG
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG -S7 >/dev/null 2>&1 || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --offset 80000 >/dev/null 2>&1 || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --offset 8192 || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --offset 0 || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV-missing --header $HEADER_IMG $DEV_NAME 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail
$CRYPTSETUP -q resize $DEV_NAME --size 100 --header $HEADER_IMG || fail
$CRYPTSETUP -q status $DEV_NAME --header $HEADER_IMG | grep "size:" | grep -q "100 sectors" || fail
+$CRYPTSETUP -q status $DEV_NAME | grep "type:" | grep -q "n/a" || fail
+$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
$CRYPTSETUP luksSuspend $DEV_NAME --header $HEADER_IMG || fail
-echo "key0" | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail
+echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail
+$CRYPTSETUP luksSuspend $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail
$CRYPTSETUP luksClose $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 5 _fakedev_ --header $HEADER_IMG $KEY5 || fail
+$CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "Key Slot 5: ENABLED" || fail
+$CRYPTSETUP luksKillSlot -q _fakedev_ --header $HEADER_IMG 5 || fail
+$CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "Key Slot 5: DISABLED" || fail
+echo $PWD1 | $CRYPTSETUP open --test-passphrase $HEADER_IMG || fail
prepare "[29] Repair metadata" wipe
-$CRYPTSETUP -q luksFormat -i1 $LOOPDEV $KEY1 --key-slot 0 || fail
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 0 || fail
# second sector overwrite should corrupt keyslot 6+7
dd if=/dev/urandom of=$LOOPDEV bs=512 seek=1 count=1 >/dev/null 2>&1
$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME >/dev/null 2>&1 && fail
$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksClose $DEV_NAME || fail
+prepare "[30] LUKS erase" wipe
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY5 --key-slot 5 || fail
+$CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: ENABLED" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: ENABLED" || fail
+$CRYPTSETUP luksErase -q $LOOPDEV || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: DISABLED" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: DISABLED" || fail
+
+prepare "[31] Deferred removal of device" wipe
+echo $PWD1 | $CRYPTSETUP open --type plain --hash sha256 $LOOPDEV $DEV_NAME || fail
+echo $PWD2 | $CRYPTSETUP open --type plain --hash sha256 /dev/mapper/$DEV_NAME $DEV_NAME2 || fail
+$CRYPTSETUP close $DEV_NAME >/dev/null 2>&1 && fail
+$CRYPTSETUP -q status $DEV_NAME >/dev/null 2>&1 || fail
+$CRYPTSETUP close --deferred $DEV_NAME >/dev/null 2>&1
+if [ $? -eq 0 ] ; then
+ dmsetup info $DEV_NAME | grep -q "DEFERRED REMOVE" || fail
+ $CRYPTSETUP -q status $DEV_NAME >/dev/null 2>&1 || fail
+ $CRYPTSETUP close $DEV_NAME2 || fail
+ $CRYPTSETUP -q status $DEV_NAME >/dev/null 2>&1 && fail
+else
+ $CRYPTSETUP close $DEV_NAME2 >/dev/null 2>&1
+ $CRYPTSETUP close $DEV_NAME >/dev/null 2>&1
+fi
+
+# Interactive tests
+# Do not remove sleep 0.1 below, the password query flushes TTY buffer (so the code is racy).
+which expect >/dev/null 2>&1 || skip "WARNING: expect tool missing, interactive test will be skipped." 0
+
+prepare "[32] Interactive password retry from terminal." new
+EXPECT_DEV=$(losetup $LOOPDEV | sed -e "s/.*(\(.*\))/\1/")
+EXPECT_TIMEOUT=10
+[ -n "$VALG" ] && EXPECT_TIMEOUT=60
+
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW luksOpen -v -T 2 $LOOPDEV $DEV_NAME
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0 x\n"
+expect timeout abort "No key available with this passphrase."
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Key slot 0 unlocked."
+expect timeout abort "Command successful."
+expect timeout abort eof
+exit
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+check_exists
+$CRYPTSETUP -q luksClose $DEV_NAME || fail
+
+prepare "[33] Interactive unsuccessful password retry from terminal." new
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW luksOpen -v -T 2 $LOOPDEV $DEV_NAME
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0 x\n"
+expect timeout abort "No key available with this passphrase."
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0 y\n"
+expect timeout abort "No key available with this passphrase."
+expect timeout abort eof
+exit
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+
+prepare "[34] Interactive kill of last key slot." new
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW luksKillSlot -v $LOOPDEV 0
+expect timeout abort "Are you sure? (Type 'yes' in capital letters):"
+send "YES\n"
+expect timeout abort "Enter any remaining passphrase:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksKillSlot -v $LOOPDEV 0
+expect timeout abort "Keyslot 0 is not active."
+expect timeout abort eof
+exit
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+
+prepare "[35] Interactive format of device." wipe
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW luksFormat --type luks1 $FAST_PBKDF_OPT -v $LOOPDEV
+expect timeout abort "Are you sure? (Type 'yes' in capital letters):"
+send "YES\n"
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Verify passphrase:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksOpen -v $LOOPDEV --test-passphrase
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+exit
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+
+prepare "[36] Interactive unsuccessful format of device." new
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW erase -v $LOOPDEV
+expect timeout abort "Are you sure? (Type 'yes' in capital letters):"
+send "YES\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksFormat --type luks1 $FAST_PBKDF_OPT -v $LOOPDEV
+expect timeout abort "Are you sure? (Type 'yes' in capital letters):"
+send "YES\n"
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Verify passphrase:"
+sleep 0.1
+send "$PWD0 x\n"
+expect timeout abort "Passphrases do not match."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksOpen -v $LOOPDEV -T 1 --test-passphrase
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "No usable keyslot is available."
+expect timeout abort eof
+exit
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+
+prepare "[37] Interactive add key." new
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW luksAddKey -S 2 $FAST_PBKDF_OPT -v $LOOPDEV
+expect timeout abort "Enter any existing passphrase:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Enter new passphrase for key slot:"
+sleep 0.1
+send "$PWD1\n"
+expect timeout abort "Verify passphrase:"
+sleep 0.1
+send "$PWD1\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksOpen $FAST_PBKDF_OPT -v $LOOPDEV --test-passphrase
+expect timeout abort "Enter passphrase"
+sleep 0.1
+send "$PWD1\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksKillSlot -v $LOOPDEV 1
+expect timeout abort "Keyslot 1 is not active."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksKillSlot -v $LOOPDEV 2
+expect timeout abort "Enter any remaining passphrase:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Key slot 2 removed."
+expect timeout abort eof
+exit
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+
+prepare "[38] Interactive change key." new
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW luksChangeKey $FAST_PBKDF_OPT -v $LOOPDEV
+expect timeout abort "Enter passphrase to be changed:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Enter new passphrase:"
+sleep 0.1
+send "$PWD1\n"
+expect timeout abort "Verify passphrase:"
+sleep 0.1
+send "$PWD1\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksOpen -v $LOOPDEV --test-passphrase
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD1\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+exit
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+
+prepare "[39] Interactive suspend and resume." new
+echo $PWD0 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW luksSuspend -v $DEV_NAME
+expect timeout abort "Command successful."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksResume -v -T 3 $DEV_NAME
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0 x\n"
+expect timeout abort "No key available with this passphrase."
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD1\n"
+expect timeout abort "No key available with this passphrase."
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0 y\n"
+expect timeout abort "No key available with this passphrase."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksResume -v $DEV_NAME
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+exit
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+$CRYPTSETUP remove $DEV_NAME || fail
+
+prepare "[40] Long passphrase from TTY." wipe
+EXPECT_DEV=$(losetup $LOOPDEV | sed -e "s/.*(\(.*\))/\1/")
+
+# Password of maximal length 512 characters
+LONG_PWD=\
+"0123456789abcdef0123456789ABCDEF0123456789abcdef0123456789ABCDEF"\
+"Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do "\
+"eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut e"\
+"nim ad minim veniam, quis nostrud exercitation ullamco laboris n"\
+"isi ut aliquip ex ea commodo consequat. Duis aute irure dolor in"\
+" reprehenderit in voluptate velit esse cillum dolore eu fugiat n"\
+"ulla pariatur. Excepteur sint occaecat cupidatat non proident, s"\
+"unt in culpa qui officia deserunt mollit anim id est laborum.DEF"
+
+echo -n "$LONG_PWD" >$KEYE
+
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW luksFormat --type luks1 $FAST_PBKDF_OPT -v $LOOPDEV
+expect timeout abort "Are you sure? (Type 'yes' in capital letters):"
+send "YES\n"
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$LONG_PWD\n"
+expect timeout abort "Verify passphrase:"
+sleep 0.1
+send "$LONG_PWD\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksOpen -v $LOOPDEV --test-passphrase --key-file $KEYE
+expect timeout abort "Command successful."
+expect timeout abort eof
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+
remove_mapping
exit 0
projects / platform / upstream / cryptsetup.git / blobdiff