fi; \
for d in $$dirs; do \
for s in tap sh; do \
- ls $$d/t/*.$$s $$d/t/ax/*.$$s 2>/dev/null; \
+ ls $$d/t/ax/*.$$s $$d/t/*.$$s $$d/contrib/t/*.$$s 2>/dev/null; \
done; \
done | sort)
-xdefs = $(srcdir)/defs $(srcdir)/defs-static.in
+xdefs = \
+ $(srcdir)/t/ax/am-test-lib.sh \
+ $(srcdir)/t/ax/test-lib.sh \
+ $(srcdir)/t/ax/test-defs.in \
+ $(srcdir)/defs
ams := $(shell find $(srcdir) -name '*.dir' -prune -o -name '*.am' -print)
sc_perl_local \
sc_AMDEP_TRUE_in_automake_in \
sc_tests_make_without_am_makeflags \
+$(sc_obsolete_requirements_rules) \
sc_tests_obsolete_variables \
sc_tests_here_document_format \
+sc_tests_command_subst \
sc_tests_Exit_not_exit \
sc_tests_automake_fails \
sc_tests_required_after_defs \
sc_tests_overriding_macros_on_cmdline \
sc_tests_plain_sleep \
+sc_tests_ls_t \
+sc_tests_executable \
sc_m4_am_plain_egrep_fgrep \
sc_tests_no_configure_in \
sc_tests_PATH_SEPARATOR \
@perllibdir="./lib$(PATH_SEPARATOR)$(srcdir)/lib" $(PERL) -c -w automake
@perllibdir="./lib$(PATH_SEPARATOR)$(srcdir)/lib" $(PERL) -c -w aclocal
-## expect no instances of '${...}'. However, $${...} is ok, since that
+## Expect no instances of '${...}'. However, $${...} is ok, since that
## is a shell construct, not a Makefile construct.
sc_no_brace_variable_expansions:
- @if grep -F '$${' $(ams) | grep -F -v '$$$$'; then \
+ @if grep -v '^ *#' $(ams) | grep -F '$${' | grep -F -v '$$$$'; then \
echo "Found too many uses of '\$${' in the lines above." 1>&2; \
exit 1; \
else :; fi
## Make sure 'rm' is called with '-f'.
sc_rm_minus_f:
@if grep -v '^#' $(ams) $(xtests) \
- | grep -v '/spy-rm\.tap:' \
+ | grep -vE '/(spy-rm\.tap|subobj-clean.*-pr10697\.sh):' \
| grep -E '\<rm ([^-]|\-[^f ]*\>)'; \
then \
echo "Suspicious 'rm' invocation." 1>&2; \
sc_tests_obsolete_variables:
@vars=" \
using_tap \
+ am_using_tap \
test_prefer_config_shell \
original_AUTOMAKE \
original_ACLOCAL \
exit 1; \
else :; fi
+## Look out for obsolete requirements specified in the test cases.
+sc_obsolete_requirements_rules = sc_no_texi2dvi-o sc_no_makeinfo-html
+modern-requirement.texi2dvi-o = texi2dvi
+modern-requirement.makeinfo-html = makeinfo
+
+$(sc_obsolete_requirements_rules): sc_no_% :
+ @if grep -E 'required=.*\b$*\b' $(xtests); then \
+ echo "Requirement '$*' is obsolete and shouldn't" \
+ "be used anymore." >&2; \
+ echo "You should use '$(modern-requirement.$*)' instead." >&2; \
+ exit 1; \
+ fi
+
## Tests should never call some programs directly, but only through the
## corresponding variable (e.g., '$MAKE', not 'make'). This will allow
## the programs to be overridden at configure time (for less brittleness)
## Tests should only use END and EOF for here documents
## (so that the next test is effective).
sc_tests_here_document_format:
- @if grep '<<' $(xtests) | grep -Ev '\b(END|EOF)\b|\bstd::cout <<'; then \
+ @if grep '<<' $(xtests) | grep -Ev '\b(END|EOF)\b|\bcout <<'; then \
echo 'Use here documents with "END" and "EOF" only, for greppability.' 1>&2; \
exit 1; \
fi
-## Tests should never call exit directly, but use Exit.
-## This is so that the exit status is transported correctly across the 0 trap.
-## Ignore comments, testsuite self tests, and one perl line in ext2.sh.
-sc_tests_Exit_not_exit:
- @found=false; for file in $(xtests); do \
- case $$file in */self-check-*) continue;; esac; \
- res=`sed -n -e '/^#/d; /^\$$PERL/d' -e '/<<.*END/,/^END/b' \
- -e '/<<.*EOF/,/^EOF/b' -e '/exit [$$0-9]/p' $$file`; \
+## Our test case should use the $(...) POSIX form for command substitution,
+## rather than the older `...` form.
+## The point of ignoring text on here-documents is that we want to exempt
+## Makefile.am rules, configure.ac code and helper shell script created and
+## used by out shell scripts, because Autoconf (as of version 2.69) does not
+## yet ensure that $CONFIG_SHELL will be set to a proper POSIX shell.
+sc_tests_command_subst:
+ @found=false; \
+ scan () { \
+ sed -n -e '/^#/d' \
+ -e '/<<.*END/,/^END/b' -e '/<<.*EOF/,/^EOF/b' \
+ -e 's/\\`/\\{backtick}/' \
+ -e "s/[^\\]'\([^']*\`[^']*\)*'/'{quoted-text}'/g" \
+ -e '/`/p' $$*; \
+ }; \
+ for file in $(xtests); do \
+ res=`scan $$file`; \
if test -n "$$res"; then \
echo "$$file:$$res"; \
found=true; \
fi; \
done; \
if $$found; then \
- echo 'Do not call plain "exit", use "Exit" instead, in above tests.' 1>&2; \
+ echo 'Use $$(...), not `...`, for command substitutions.' >&2; \
+ exit 1; \
+ fi
+
+## Tests should no more call 'Exit', just 'exit'. That's because we
+## now have in place a better workaround to ensure the exit status is
+## transported correctly across the exit trap.
+sc_tests_Exit_not_exit:
+ @if grep 'Exit' $(xtests) $(xdefs) | grep -Ev '^[^:]+: *#' | grep .; then \
+ echo "Use 'exit', not 'Exit'; it's obsolete now." 1>&2; \
exit 1; \
fi
## Use AUTOMAKE_fails when appropriate
sc_tests_automake_fails:
- @if grep -v '^#' $(xtests) | grep '\$$AUTOMAKE.*&&.*[eE]xit'; then \
+ @if grep -v '^#' $(xtests) | grep '\$$AUTOMAKE.*&&.*exit'; then \
echo 'Use AUTOMAKE_fails + grep to catch automake failures in the above tests.' 1>&2; \
exit 1; \
fi
exit 1; \
fi
+## Prefer use of our 'is_newest' auxiliary script over the more hacky
+## idiom "test $(ls -1t new old | sed 1q) = new", which is both more
+## cumbersome and more fragile.
+sc_tests_ls_t:
+ @if LC_ALL=C grep -E '\bls(\s+-[a-zA-Z0-9]+)*\s+-[a-zA-Z0-9]*t' \
+ $(xtests); then \
+ echo "Use 'is_newest' rather than hacks based on 'ls -t'" 1>&2; \
+ exit 1; \
+ fi
+
+## Test scripts must be executable.
+sc_tests_executable:
+ @st=0; \
+ for f in $(xtests); do \
+ case $$f in \
+ t/ax/*|./t/ax/*|$(srcdir)/t/ax/*);; \
+ *) test -x $$f || { echo "$$f: not executable" >&2; st=1; }; \
+ esac; \
+ done; \
+ test $$st -eq 0 || echo '$@: some test scripts are not executable' >&2; \
+ exit $$st;
+
+
## Never use 'sleep 1' to create files with different timestamps.
## Use '$sleep' instead. Some filesystems (e.g., Windows) have only
## a 2sec resolution.
projects / platform / upstream / automake.git / blobdiff