* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
- * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* KIND, either express or implied.
*
***************************************************************************/
-#include "setup.h"
+#include "tool_setup.h"
#include "tool_panykey.h"
#include "tool_help.h"
+#include "tool_libinfo.h"
+#include "tool_version.h"
#include "memdebug.h" /* keep this as LAST include */
" --digest Use HTTP Digest Authentication (H)",
" --disable-eprt Inhibit using EPRT or LPRT (F)",
" --disable-epsv Inhibit using EPSV (F)",
+ " --dns-servers DNS server addrs to use: 1.1.1.1;2.2.2.2",
+ " --dns-interface Interface to use for DNS requests",
+ " --dns-ipv4-addr IPv4 address to use for DNS requests, dot notation",
+ " --dns-ipv6-addr IPv6 address to use for DNS requests, dot notation",
" -D, --dump-header FILE Write the headers to this file",
" --egd-file FILE EGD socket path for random data (SSL)",
- " --engine ENGINGE Crypto engine (SSL). \"--engine list\" for list",
+ " --engine ENGINE Crypto engine (SSL). \"--engine list\" for list",
#ifdef USE_ENVIRONMENT
" --environment Write results to environment variables (RISC OS)",
#endif
" --hostpubmd5 MD5 "
"Hex encoded MD5 string of the host public key. (SSH)",
" -0, --http1.0 Use HTTP 1.0 (H)",
+ " --http1.1 Use HTTP 1.1 (H)",
+ " --http2 Use HTTP 2 (H)",
" --ignore-content-length Ignore the HTTP Content-Length header",
" -i, --include Include protocol headers in the output (H/F)",
" -k, --insecure Allow connections to SSL sites without certs (H)",
" --key KEY Private key file name (SSL/SSH)",
" --key-type TYPE Private key file type (DER/PEM/ENG) (SSL)",
" --krb LEVEL Enable Kerberos with specified security level (F)",
+#ifndef CURL_DISABLE_LIBCURL_OPTION
" --libcurl FILE Dump libcurl equivalent code of this command line",
+#endif
" --limit-rate RATE Limit transfer speed to this rate",
- " -l, --list-only List only names of an FTP directory (F)",
+ " -l, --list-only List only mode (F/POP3)",
" --local-port RANGE Force use of these local port numbers",
" -L, --location Follow redirects (H)",
" --location-trusted like --location and send auth to other hosts (H)",
+ " --login-options OPTIONS Server login options (IMAP, POP3, SMTP)",
" -M, --manual Display the full manual",
- " --mail-from FROM Mail from this address",
- " --mail-rcpt TO Mail to this receiver(s)",
+ " --mail-from FROM Mail from this address (SMTP)",
+ " --mail-rcpt TO Mail to this/these addresses (SMTP)",
+ " --mail-auth AUTH Originator address of the original email (SMTP)",
" --max-filesize BYTES Maximum file size to download (H/F)",
" --max-redirs NUM Maximum number of redirects allowed (H)",
" -m, --max-time SECONDS Maximum time allowed for the transfer",
+ " --metalink Process given URLs as metalink XML file",
" --negotiate Use HTTP Negotiate Authentication (H)",
" -n, --netrc Must read .netrc for user name and password",
" --netrc-optional Use either .netrc or URL; overrides -n",
" --netrc-file FILE Set up the netrc filename to use",
+ " -: --next "
+ "Allows the following URL to use a separate set of options",
+ " --no-alpn Disable the ALPN TLS extension (H)",
" -N, --no-buffer Disable buffering of the output stream",
" --no-keepalive Disable keepalive use on the connection",
+ " --no-npn Disable the NPN TLS extension (H)",
" --no-sessionid Disable SSL session-ID reusing (SSL)",
" --noproxy List of hosts which do not use proxy",
" --ntlm Use HTTP NTLM authentication (H)",
+ " --oauth2-bearer TOKEN OAuth 2 Bearer Token (IMAP, POP3, SMTP)",
" -o, --output FILE Write output to <file> instead of stdout",
" --pass PASS Pass phrase for the private key (SSL/SSH)",
" --post301 "
"Do not switch to GET after following a 301 redirect (H)",
" --post302 "
"Do not switch to GET after following a 302 redirect (H)",
+ " --post303 "
+ "Do not switch to GET after following a 303 redirect (H)",
" -#, --progress-bar Display transfer progress as a progress bar",
" --proto PROTOCOLS Enable/disable specified protocols",
" --proto-redir PROTOCOLS "
" --retry-delay SECONDS "
"When retrying, wait this many seconds between each",
" --retry-max-time SECONDS Retry only within this period",
+ " --sasl-ir Enable initial response in SASL authentication",
" -S, --show-error "
"Show error. With -s, make curl show errors when they occur",
" -s, --silent Silent mode. Don't output anything",
" --ssl-reqd Require SSL/TLS (FTP, IMAP, POP3, SMTP)",
" -2, --sslv2 Use SSLv2 (SSL)",
" -3, --sslv3 Use SSLv3 (SSL)",
+ " --ssl-allow-beast Allow security flaw to improve interop (SSL)",
" --stderr FILE Where to redirect stderr. - means stdout",
" --tcp-nodelay Use the TCP_NODELAY option",
" -t, --telnet-option OPT=VAL Set telnet option",
" --tftp-blksize VALUE Set TFTP BLKSIZE option (must be >512)",
" -z, --time-cond TIME Transfer based on a time condition",
- " -1, --tlsv1 Use TLSv1 (SSL)",
+ " -1, --tlsv1 Use => TLSv1 (SSL)",
+ " --tlsv1.0 Use TLSv1.0 (SSL)",
+ " --tlsv1.1 Use TLSv1.1 (SSL)",
+ " --tlsv1.2 Use TLSv1.2 (SSL)",
" --trace FILE Write a debug trace to the given file",
" --trace-ascii FILE Like --trace but without the hex output",
" --trace-time Add time stamps to trace/verbose output",
# define PRINT_LINES_PAUSE 16
#endif
+struct feat {
+ const char *name;
+ int bitmask;
+};
+
+static const struct feat feats[] = {
+ {"AsynchDNS", CURL_VERSION_ASYNCHDNS},
+ {"Debug", CURL_VERSION_DEBUG},
+ {"TrackMemory", CURL_VERSION_CURLDEBUG},
+ {"GSS-Negotiate", CURL_VERSION_GSSNEGOTIATE},
+ {"IDN", CURL_VERSION_IDN},
+ {"IPv6", CURL_VERSION_IPV6},
+ {"Largefile", CURL_VERSION_LARGEFILE},
+ {"NTLM", CURL_VERSION_NTLM},
+ {"NTLM_WB", CURL_VERSION_NTLM_WB},
+ {"SPNEGO", CURL_VERSION_SPNEGO},
+ {"SSL", CURL_VERSION_SSL},
+ {"SSPI", CURL_VERSION_SSPI},
+ {"krb4", CURL_VERSION_KERBEROS4},
+ {"libz", CURL_VERSION_LIBZ},
+ {"CharConv", CURL_VERSION_CONV},
+ {"TLS-SRP", CURL_VERSION_TLSAUTH_SRP},
+ {"HTTP2", CURL_VERSION_HTTP2}
+};
+
void tool_help(void)
{
int i;
}
}
+void tool_version_info(void)
+{
+ const char *const *proto;
+
+ printf(CURL_ID "%s\n", curl_version());
+ if(curlinfo->protocols) {
+ printf("Protocols: ");
+ for(proto = curlinfo->protocols; *proto; ++proto) {
+ printf("%s ", *proto);
+ }
+ puts(""); /* newline */
+ }
+ if(curlinfo->features) {
+ unsigned int i;
+ printf("Features: ");
+ for(i = 0; i < sizeof(feats)/sizeof(feats[0]); i++) {
+ if(curlinfo->features & feats[i].bitmask)
+ printf("%s ", feats[i].name);
+ }
+#ifdef USE_METALINK
+ printf("Metalink ");
+#endif
+ puts(""); /* newline */
+ }
+}
+
+void tool_list_engines(CURL *curl)
+{
+ struct curl_slist *engines = NULL;
+
+ /* Get the list of engines */
+ curl_easy_getinfo(curl, CURLINFO_SSL_ENGINES, &engines);
+
+ puts("Build-time engines:");
+ if(engines) {
+ for(; engines; engines = engines->next)
+ printf(" %s\n", engines->data);
+ }
+ else {
+ puts(" <none>");
+ }
+
+ /* Cleanup the list of engines */
+ curl_slist_free_all(engines);
+}
projects / platform / upstream / curl.git / blobdiff