#define PA_CONTEXT_NOFAIL PA_CONTEXT_NOFAIL
/** \endcond */
+/** Direction bitfield - while we currently do not expose anything bidirectional,
+ one should test against the bit instead of the value (e g if (d & PA_DIRECTION_OUTPUT)),
+ because we might add bidirectional stuff in the future. \since 2.0
+*/
+typedef enum pa_direction {
+ PA_DIRECTION_OUTPUT = 0x0001U, /**< Output direction */
+ PA_DIRECTION_INPUT = 0x0002U /**< Input direction */
+} pa_direction_t;
+
+/** \cond fulldocs */
+#define PA_DIRECTION_OUTPUT PA_DIRECTION_OUTPUT
+#define PA_DIRECTION_INPUT PA_DIRECTION_INPUT
+/** \endcond */
+
+/** The type of device we are dealing with */
+typedef enum pa_device_type {
+ PA_DEVICE_TYPE_SINK, /**< Playback device */
+ PA_DEVICE_TYPE_SOURCE /**< Recording device */
+} pa_device_type_t;
+
+/** \cond fulldocs */
+#define PA_DEVICE_TYPE_SINK PA_DEVICE_TYPE_SINK
+#define PA_DEVICE_TYPE_SOURCE PA_DEVICE_TYPE_SOURCE
+/** \endcond */
+
/** The direction of a pa_stream object */
typedef enum pa_stream_direction {
PA_STREAM_NODIRECTION, /**< Invalid direction */
* consider absolute when the sink is in flat volume mode,
* relative otherwise. \since 0.9.20 */
- PA_STREAM_PASSTHROUGH = 0x80000U
+ PA_STREAM_PASSTHROUGH = 0x80000U,
/**< Used to tag content that will be rendered by passthrough sinks.
* The data will be left as is and not reformatted, resampled.
* \since 1.0 */
+ PA_STREAM_START_RAMP_MUTED = 0x100000U
+ /**< Used to tag content that the stream will be started ramp volume
+ * muted so that you can nicely fade it in */
+
} pa_stream_flags_t;
/** \cond fulldocs */
#define PA_STREAM_FAIL_ON_SUSPEND PA_STREAM_FAIL_ON_SUSPEND
#define PA_STREAM_RELATIVE_VOLUME PA_STREAM_RELATIVE_VOLUME
#define PA_STREAM_PASSTHROUGH PA_STREAM_PASSTHROUGH
+#define PA_STREAM_START_RAMP_MUTED PA_STREAM_START_RAMP_MUTED
/** \endcond */
/** Playback and record buffer metrics */
typedef struct pa_buffer_attr {
uint32_t maxlength;
- /**< Maximum length of the buffer. Setting this to (uint32_t) -1
+ /**< Maximum length of the buffer in bytes. Setting this to (uint32_t) -1
* will initialize this to the maximum value supported by server,
* which is recommended. */
} pa_buffer_attr;
/** Error values as used by pa_context_errno(). Use pa_strerror() to convert these values to human readable strings */
-enum {
+typedef enum pa_error_code {
PA_OK = 0, /**< No error */
PA_ERR_ACCESS, /**< Access failure */
PA_ERR_COMMAND, /**< Unknown command */
PA_ERR_IO, /**< An IO error happened. \since 0.9.16 */
PA_ERR_BUSY, /**< Device or resource busy. \since 0.9.17 */
PA_ERR_MAX /**< Not really an error but the first invalid error code */
-};
+} pa_error_code_t;
/** \cond fulldocs */
#define PA_OK PA_OK
/**< The latency can be adjusted dynamically depending on the
* needs of the connected streams. \since 0.9.15 */
- PA_SINK_SYNC_VOLUME = 0x0100U,
- /**< The HW volume changes are syncronized with SW volume.
- * \since 1.0 */
+ PA_SINK_SET_FORMATS = 0x0100U,
+ /**< The sink allows setting what formats are supported by the connected
+ * hardware. The actual functionality to do this might be provided by an
+ * extension. \since 1.0 */
+#ifdef __INCLUDED_FROM_PULSE_AUDIO
/** \cond fulldocs */
/* PRIVATE: Server-side values -- do not try to use these at client-side.
* The server will filter out these flags anyway, so you should never see
* these flags in sinks. */
- PA_SINK_SHARE_VOLUME_WITH_MASTER = 0x0200U,
+ PA_SINK_SHARE_VOLUME_WITH_MASTER = 0x1000000U,
/**< This sink shares the volume with the master sink (used by some filter
* sinks). */
+
+ PA_SINK_DEFERRED_VOLUME = 0x2000000U,
+ /**< The HW volume changes are syncronized with SW volume. */
/** \endcond */
+#endif
- PA_SINK_SET_FORMATS = 0x0400U,
- /**< The sink allows setting what formats are supported by the connected
- * hardware. The actual functionality to do this might be provided by an
- * extension. \since 1.0 */
} pa_sink_flags_t;
/** \cond fulldocs */
#define PA_SINK_DECIBEL_VOLUME PA_SINK_DECIBEL_VOLUME
#define PA_SINK_FLAT_VOLUME PA_SINK_FLAT_VOLUME
#define PA_SINK_DYNAMIC_LATENCY PA_SINK_DYNAMIC_LATENCY
-#define PA_SINK_SYNC_VOLUME PA_SINK_SYNC_VOLUME
-#define PA_SINK_SHARE_VOLUME_WITH_MASTER PA_SINK_SHARE_VOLUME_WITH_MASTER
+#define PA_SINK_SET_FORMATS PA_SINK_SET_FORMATS
+#ifdef __INCLUDED_FROM_PULSE_AUDIO
+#define PA_SINK_CLIENT_FLAGS_MASK 0xFFFFFF
+#endif
/** \endcond */
return x == PA_SINK_RUNNING || x == PA_SINK_IDLE;
}
+/** Returns non-zero if sink is running. \since 1.0 */
+static inline int PA_SINK_IS_RUNNING(pa_sink_state_t x) {
+ return x == PA_SINK_RUNNING;
+}
+
/** \cond fulldocs */
#define PA_SINK_INVALID_STATE PA_SINK_INVALID_STATE
#define PA_SINK_RUNNING PA_SINK_RUNNING
/**< This source is in flat volume mode, i.e. always the maximum of
* the volume of all connected outputs. \since 1.0 */
- PA_SOURCE_PASSTHROUGH = 0x0100U,
- /**< This sink has support for passthrough mode. The data will be left
- * as is and not reformatted, resampled, mixed.
- * \since 1.0 */
-
- PA_SOURCE_SYNC_VOLUME = 0x0200U,
- /**< The HW volume changes are syncronized with SW volume.
- * \since 1.0 */
-
+#ifdef __INCLUDED_FROM_PULSE_AUDIO
/** \cond fulldocs */
/* PRIVATE: Server-side values -- do not try to use these at client-side.
* The server will filter out these flags anyway, so you should never see
* these flags in sources. */
- PA_SOURCE_SHARE_VOLUME_WITH_MASTER = 0x0400U,
+ PA_SOURCE_SHARE_VOLUME_WITH_MASTER = 0x1000000U,
/**< This source shares the volume with the master source (used by some filter
* sources). */
+
+ PA_SOURCE_DEFERRED_VOLUME = 0x2000000U,
+ /**< The HW volume changes are syncronized with SW volume. */
+#endif
} pa_source_flags_t;
/** \cond fulldocs */
#define PA_SOURCE_DECIBEL_VOLUME PA_SOURCE_DECIBEL_VOLUME
#define PA_SOURCE_DYNAMIC_LATENCY PA_SOURCE_DYNAMIC_LATENCY
#define PA_SOURCE_FLAT_VOLUME PA_SOURCE_FLAT_VOLUME
-#define PA_SOURCE_PASSTHROUGH PA_SOURCE_PASSTHROUGH
-#define PA_SOURCE_SYNC_VOLUME PA_SOURCE_SYNC_VOLUME
-#define PA_SOURCE_SHARE_VOLUME_WITH_MASTER PA_SOURCE_SHARE_VOLUME_WITH_MASTER
+#ifdef __INCLUDED_FROM_PULSE_AUDIO
+#define PA_SOURCE_CLIENT_FLAGS_MASK 0xFFFFFF
+#endif
/** \endcond */
return x == PA_SOURCE_RUNNING || x == PA_SOURCE_IDLE;
}
+/** Returns non-zero if source is running \since 1.0 */
+static inline int PA_SOURCE_IS_RUNNING(pa_source_state_t x) {
+ return x == PA_SOURCE_RUNNING;
+}
+
/** \cond fulldocs */
#define PA_SOURCE_INVALID_STATE PA_SOURCE_INVALID_STATE
#define PA_SOURCE_RUNNING PA_SOURCE_RUNNING
* playback, \since 1.0 */
#define PA_STREAM_EVENT_FORMAT_LOST "format-lost"
+/** Port availability / jack detection status
+ * \since 2.0 */
+typedef enum pa_port_available {
+ PA_PORT_AVAILABLE_UNKNOWN = 0, /**< This port does not support jack detection \since 2.0 */
+ PA_PORT_AVAILABLE_NO = 1, /**< This port is not available, likely because the jack is not plugged in. \since 2.0 */
+ PA_PORT_AVAILABLE_YES = 2, /**< This port is available, likely because the jack is plugged in. \since 2.0 */
+} pa_port_available_t;
+
+/** \cond fulldocs */
+#define PA_PORT_AVAILABLE_UNKNOWN PA_PORT_AVAILABLE_UNKNOWN
+#define PA_PORT_AVAILABLE_NO PA_PORT_AVAILABLE_NO
+#define PA_PORT_AVAILABLE_YES PA_PORT_AVAILABLE_YES
+
+/** \endcond */
+
+/** \cond fulldocs */
+#define PA_VOLUMER_RAMP_TYPE_LINEAR PA_VOLUMER_RAMP_TYPE_LINEAR
+#define PA_VOLUMER_RAMP_TYPE_LOGARITHMIC PA_VOLUMER_RAMP_TYPE_LOGARITHMIC
+#define PA_VOLUMER_RAMP_TYPE_CUBIC PA_VOLUMER_RAMP_TYPE_CUBIC
+/** \endcond */
+
PA_C_DECL_END
#endif
projects / profile / ivi / pulseaudio.git / blobdiff