#ifndef LIBINPUT_H
#define LIBINPUT_H
+#ifdef __cplusplus
+extern "C" {
+#endif
+
#include <stdlib.h>
#include <stdint.h>
#include <libudev.h>
+#define LIBINPUT_ATTRIBUTE_PRINTF(_format, _args) \
+ __attribute__ ((format (printf, _format, _args)))
+#define LIBINPUT_ATTRIBUTE_DEPRECATED __attribute__ ((deprecated))
+
/**
* @mainpage
* libinput is a generic input device handling library. It abstracts
*/
/**
- * @ingroup fixed_point
+ * @page tpbuttons Touchpad button behavior
+ *
+ * For touchpad devices without physical buttons, libinput enables an
+ * emulated right button area through either of two methods.
+ *
+ * Software button areas
+ * =====================
+ * On most touchpads, the bottom area of the touchpad is split into a left
+ * and a right-button area. Pressing the touchpad down with a finger in
+ * those areas will generate clicks as shown in the diagram below:
+ *
+ * @code
+ +------------------------+
+ | |
+ | |
+ | LEFT |
+ | |
+ | |
+ +------------------------+
+ | LEFT | RIGHT |
+ +------------------------+
+ * @endcode
+ *
+ * Generally, the touchpad will emulate a right-button click if the finger
+ * was set down in the right button area and did not leave the
+ * right button area before clicking, even if another finger was already
+ * down on the touchpad in another area.
+ * A middle click is generated by clicking the touchpad when one finger is
+ * in the bottom left button area, and one finger is in the botton right
+ * button area.
+ * The exact behavior of the touchpad is implementation-dependent.
+ *
+ * Top software button area
+ * ========================
+ * On selected touchpads, the top area of the touchpad is a separate set of
+ * software buttons split into a left, middle and right button area.
+ * Pressing the touchpad down with a finger in those areas will generate
+ * clicks as shown in the diagram below:
+ *
+ * @code
+ +------------------------+
+ | LEFT | MIDDLE | RIGHT |
+ +------------------------+
+ | |
+ | LEFT |
+ | |
+ +------------------------+
+ | LEFT | RIGHT |
+ +------------------------+
+ * @endcode
+ * This behavior is enabled on the Lenovo *40 series (T440, T540, T240...)
+ * and the Lenovo Helix, Yoga S1 and Carbon X1 2nd.
*
- * libinput 24.8 fixed point real number.
+ * Clickfinger
+ * ===========
+ * On Apple touchpads, no button areas are provided. Instead, use a
+ * two-finger click for a right button click, and a three-finger click for a
+ * middle button click.
*/
-typedef int32_t li_fixed_t;
+
+/**
+ * Log priority for internal logging messages.
+ */
+enum libinput_log_priority {
+ LIBINPUT_LOG_PRIORITY_DEBUG = 10,
+ LIBINPUT_LOG_PRIORITY_INFO = 20,
+ LIBINPUT_LOG_PRIORITY_ERROR = 30,
+};
/**
* @ingroup device
*
* Capabilities on a device. A device may have one or more capabilities
* at a time, and capabilities may appear or disappear during the
- * lifteime of the device.
+ * lifetime of the device.
*/
enum libinput_device_capability {
LIBINPUT_DEVICE_CAP_KEYBOARD = 0,
* Logical state of a key. Note that the logical state may not represent
* the physical state of the key.
*/
-enum libinput_keyboard_key_state {
- LIBINPUT_KEYBOARD_KEY_STATE_RELEASED = 0,
- LIBINPUT_KEYBOARD_KEY_STATE_PRESSED = 1
+enum libinput_key_state {
+ LIBINPUT_KEY_STATE_RELEASED = 0,
+ LIBINPUT_KEY_STATE_PRESSED = 1
};
/**
* Logical state of a physical button. Note that the logical state may not
* represent the physical state of the button.
*/
-enum libinput_pointer_button_state {
- LIBINPUT_POINTER_BUTTON_STATE_RELEASED = 0,
- LIBINPUT_POINTER_BUTTON_STATE_PRESSED = 1
+enum libinput_button_state {
+ LIBINPUT_BUTTON_STATE_RELEASED = 0,
+ LIBINPUT_BUTTON_STATE_PRESSED = 1
};
* Axes on a device that are not x or y coordinates.
*/
enum libinput_pointer_axis {
- LIBINPUT_POINTER_AXIS_VERTICAL_SCROLL = 0,
- LIBINPUT_POINTER_AXIS_HORIZONTAL_SCROLL = 1
-};
-
-/**
- * @ingroup device
- *
- * Logical touch state of a touch point. A touch point usually follows the
- * sequence down, motion, up, with the number of motion events being zero or
- * greater. If a touch point was used for gesture interpretation internally
- * and will not generate any further events, the touchpoint is cancelled.
- */
-enum libinput_touch_type {
- LIBINPUT_TOUCH_TYPE_DOWN = 0,
- LIBINPUT_TOUCH_TYPE_UP = 1,
- LIBINPUT_TOUCH_TYPE_MOTION = 2,
- LIBINPUT_TOUCH_TYPE_CANCEL = 4
+ LIBINPUT_POINTER_AXIS_SCROLL_VERTICAL = 0,
+ LIBINPUT_POINTER_AXIS_SCROLL_HORIZONTAL = 1,
};
/**
* Event type for events returned by libinput_get_event().
*/
enum libinput_event_type {
+ /**
+ * This is not a real event type, and is only used to tell the user that
+ * no new event is available in the queue. See
+ * libinput_next_event_type().
+ */
LIBINPUT_EVENT_NONE = 0,
+
+ /**
+ * Signals that a device has been added to the context. The device will
+ * not be read until the next time the user calls libinput_dispatch()
+ * and data is available.
+ *
+ * This allows setting up initial device configuration before any events
+ * are created.
+ */
LIBINPUT_EVENT_DEVICE_ADDED,
+
+ /**
+ * Signals that a device has been removed. No more events from the
+ * associated device will be in the queue or be queued after this event.
+ */
LIBINPUT_EVENT_DEVICE_REMOVED,
LIBINPUT_EVENT_KEYBOARD_KEY = 300,
LIBINPUT_EVENT_POINTER_BUTTON,
LIBINPUT_EVENT_POINTER_AXIS,
- LIBINPUT_EVENT_TOUCH_TOUCH = 500,
+ LIBINPUT_EVENT_TOUCH_DOWN = 500,
+ LIBINPUT_EVENT_TOUCH_UP,
+ LIBINPUT_EVENT_TOUCH_MOTION,
+ LIBINPUT_EVENT_TOUCH_CANCEL,
/**
* Signals the end of a set of touchpoints at one device sample
* time. This event has no coordinate information attached.
*
* Touch event representing a touch down, move or up, as well as a touch
* cancel and touch frame events. Valid event types for this event are @ref
- * LIBINPUT_EVENT_TOUCH_TOUCH and @ref LIBINPUT_EVENT_TOUCH_FRAME.
+ * LIBINPUT_EVENT_TOUCH_DOWN, @ref LIBINPUT_EVENT_TOUCH_MOTION, @ref
+ * LIBINPUT_EVENT_TOUCH_UP, @ref LIBINPUT_EVENT_TOUCH_CANCEL and @ref
+ * LIBINPUT_EVENT_TOUCH_FRAME.
*/
struct libinput_event_touch;
/**
- * @defgroup fixed_point Fixed point utilities
- */
-
-/**
- * @ingroup fixed_point
- *
- * Convert li_fixed_t to a double
- *
- * @param f fixed point number
- * @return Converted double
- */
-static inline double
-li_fixed_to_double (li_fixed_t f)
-{
- union {
- double d;
- int64_t i;
- } u;
-
- u.i = ((1023LL + 44LL) << 52) + (1LL << 51) + f;
-
- return u.d - (3LL << 43);
-}
-
-/**
- * @ingroup fixed_point
- *
- * Convert li_fixed_t to a int. The fraction part is discarded.
- *
- * @param f fixed point number
- * @return Converted int
- */
-static inline int
-li_fixed_to_int(li_fixed_t f)
-{
- return f / 256;
-}
-
-/**
- * @defgroup event Acessing and destruction of events
+ * @defgroup event Accessing and destruction of events
*/
/**
* @param event The libinput event
* @return The libinput context for this event.
*/
-struct libinput*
+struct libinput *
libinput_event_get_context(struct libinput_event *event);
/**
* @return The device associated with this event
*/
-struct libinput_device*
+struct libinput_device *
libinput_event_get_device(struct libinput_event *event);
/**
* Return the pointer event that is this input event. If the event type does
* not match the pointer event types, this function returns NULL.
*
+ * The inverse of this function is libinput_event_pointer_get_base_event().
+ *
* @return A pointer event, or NULL for other events
*/
-struct libinput_event_pointer*
+struct libinput_event_pointer *
libinput_event_get_pointer_event(struct libinput_event *event);
/**
* Return the keyboard event that is this input event. If the event type does
* not match the keyboard event types, this function returns NULL.
*
+ * The inverse of this function is libinput_event_keyboard_get_base_event().
+ *
* @return A keyboard event, or NULL for other events
*/
-struct libinput_event_keyboard*
+struct libinput_event_keyboard *
libinput_event_get_keyboard_event(struct libinput_event *event);
/**
* Return the touch event that is this input event. If the event type does
* not match the touch event types, this function returns NULL.
*
+ * The inverse of this function is libinput_event_touch_get_base_event().
+ *
* @return A touch event, or NULL for other events
*/
-struct libinput_event_touch*
+struct libinput_event_touch *
libinput_event_get_touch_event(struct libinput_event *event);
/**
* Return the device event that is this input event. If the event type does
* not match the device event types, this function returns NULL.
*
+ * The inverse of this function is
+ * libinput_event_device_notify_get_base_event().
+ *
* @return A device event, or NULL for other events
*/
-struct libinput_event_device_notify*
+struct libinput_event_device_notify *
libinput_event_get_device_notify_event(struct libinput_event *event);
/**
+ * @ingroup event
+ *
+ * @return The generic libinput_event of this event
+ */
+struct libinput_event *
+libinput_event_device_notify_get_base_event(struct libinput_event_device_notify *event);
+
+/**
* @defgroup event_keyboard Keyboard events
*
* Key events are generated when a key changes its logical state, usually by
* @return The event time for this event
*/
uint32_t
-libinput_event_keyboard_get_time(
- struct libinput_event_keyboard *event);
+libinput_event_keyboard_get_time(struct libinput_event_keyboard *event);
/**
* @ingroup event_keyboard
* @return The keycode that triggered this key event
*/
uint32_t
-libinput_event_keyboard_get_key(
- struct libinput_event_keyboard *event);
+libinput_event_keyboard_get_key(struct libinput_event_keyboard *event);
/**
* @ingroup event_keyboard
*
* @return The state change of the key
*/
-enum libinput_keyboard_key_state
-libinput_event_keyboard_get_key_state(
+enum libinput_key_state
+libinput_event_keyboard_get_key_state(struct libinput_event_keyboard *event);
+
+
+/**
+ * @ingroup event_keyboard
+ *
+ * @return The generic libinput_event of this event
+ */
+struct libinput_event *
+libinput_event_keyboard_get_base_event(struct libinput_event_keyboard *event);
+
+/**
+ * @ingroup event_keyboard
+ *
+ * For the key of a LIBINPUT_EVENT_KEYBOARD_KEY event, return the total number
+ * of keys pressed on all devices on the associated seat after the event was
+ * triggered.
+ *
+ " @note It is an application bug to call this function for events other than
+ * LIBINPUT_EVENT_KEYBOARD_KEY. For other events, this function returns 0.
+ *
+ * @return the seat wide pressed key count for the key of this event
+ */
+uint32_t
+libinput_event_keyboard_get_seat_key_count(
struct libinput_event_keyboard *event);
/**
* @return The event time for this event
*/
uint32_t
-libinput_event_pointer_get_time(
- struct libinput_event_pointer *event);
+libinput_event_pointer_get_time(struct libinput_event_pointer *event);
/**
* @ingroup event_pointer
*
- * Return the delta between the last event and the current event. The axis'
- * positive direction is device-specific. For pointer events that are
- * not of type LIBINPUT_EVENT_POINTER_MOTION, this function returns 0.
+ * Return the delta between the last event and the current event. For pointer
+ * events that are not of type LIBINPUT_EVENT_POINTER_MOTION, this function
+ * returns 0.
*
* @note It is an application bug to call this function for events other than
* LIBINPUT_EVENT_POINTER_MOTION.
*
* @return the relative x movement since the last event
*/
-li_fixed_t
-libinput_event_pointer_get_dx(
- struct libinput_event_pointer *event);
+double
+libinput_event_pointer_get_dx(struct libinput_event_pointer *event);
/**
* @ingroup event_pointer
*
- * Return the delta between the last event and the current event. The
- * axis' positive direction is device-specific. For pointer events that are
- * not of type LIBINPUT_EVENT_POINTER_MOTION, this function returns 0.
+ * Return the delta between the last event and the current event. For pointer
+ * events that are not of type LIBINPUT_EVENT_POINTER_MOTION, this function
+ * returns 0.
*
* @note It is an application bug to call this function for events other than
* LIBINPUT_EVENT_POINTER_MOTION.
*
* @return the relative y movement since the last event
*/
-li_fixed_t
-libinput_event_pointer_get_dy(
- struct libinput_event_pointer *event);
+double
+libinput_event_pointer_get_dy(struct libinput_event_pointer *event);
/**
* @ingroup event_pointer
*
- * Return the absolute x coordinate of the device, scaled to screen
- * coordinates.
- * The axes' positive direction is device-specific. For pointer events that
- * are not of type LIBINPUT_EVENT_POINTER_MOTION_ABSOLUTE, this function
- * returns 0.
+ * Return the current absolute x coordinate of the pointer event, in mm from
+ * the top left corner of the device. To get the corresponding output screen
+ * coordinate, use libinput_event_pointer_get_absolute_x_transformed().
+ *
+ * For pointer events that are not of type
+ * LIBINPUT_EVENT_POINTER_MOTION_ABSOLUTE, this function returns 0.
*
* @note It is an application bug to call this function for events other than
* LIBINPUT_EVENT_POINTER_MOTION_ABSOLUTE.
*
- * @return the current absolute x coordinate scaled to screen coordinates.
+ * @return the current absolute x coordinate
*/
-li_fixed_t
-libinput_event_pointer_get_absolute_x(
- struct libinput_event_pointer *event);
+double
+libinput_event_pointer_get_absolute_x(struct libinput_event_pointer *event);
/**
* @ingroup event_pointer
*
- * Return the absolute y coordinate of the device, scaled to screen coordinates.
- * The axes' positive direction is device-specific. For pointer events that
- * are not of type LIBINPUT_EVENT_POINTER_MOTION_ABSOLUTE, this function
- * returns 0.
+ * Return the current absolute y coordinate of the pointer event, in mm from
+ * the top left corner of the device. To get the corresponding output screen
+ * coordinate, use libinput_event_pointer_get_absolute_y_transformed().
+ *
+ * For pointer events that are not of type
+ * LIBINPUT_EVENT_POINTER_MOTION_ABSOLUTE, this function returns 0.
*
* @note It is an application bug to call this function for events other than
* LIBINPUT_EVENT_POINTER_MOTION_ABSOLUTE.
*
- * @return the current absolute y coordinate scaled to screen coordinates.
+ * @return the current absolute y coordinate
*/
-li_fixed_t
-libinput_event_pointer_get_absolute_y(
- struct libinput_event_pointer *event);
+double
+libinput_event_pointer_get_absolute_y(struct libinput_event_pointer *event);
+
+/**
+ * @ingroup event_pointer
+ *
+ * Return the current absolute x coordinate of the pointer event, transformed to
+ * screen coordinates.
+ *
+ * For pointer events that are not of type
+ * LIBINPUT_EVENT_POINTER_MOTION_ABSOLUTE, the return value of this function is
+ * undefined.
+ *
+ * @note It is an application bug to call this function for events other than
+ * LIBINPUT_EVENT_POINTER_MOTION_ABSOLUTE.
+ *
+ * @param event The libinput pointer event
+ * @param width The current output screen width
+ * @return the current absolute x coordinate transformed to a screen coordinate
+ */
+double
+libinput_event_pointer_get_absolute_x_transformed(
+ struct libinput_event_pointer *event,
+ uint32_t width);
+
+/**
+ * @ingroup event_pointer
+ *
+ * Return the current absolute y coordinate of the pointer event, transformed to
+ * screen coordinates.
+ *
+ * For pointer events that are not of type
+ * LIBINPUT_EVENT_POINTER_MOTION_ABSOLUTE, the return value of this function is
+ * undefined.
+ *
+ * @note It is an application bug to call this function for events other than
+ * LIBINPUT_EVENT_POINTER_MOTION_ABSOLUTE.
+ *
+ * @param event The libinput pointer event
+ * @param height The current output screen height
+ * @return the current absolute y coordinate transformed to a screen coordinate
+ */
+double
+libinput_event_pointer_get_absolute_y_transformed(
+ struct libinput_event_pointer *event,
+ uint32_t height);
/**
* @ingroup event_pointer
* @return the button triggering this event
*/
uint32_t
-libinput_event_pointer_get_button(
- struct libinput_event_pointer *event);
+libinput_event_pointer_get_button(struct libinput_event_pointer *event);
/**
* @ingroup event_pointer
*
* @return the button state triggering this event
*/
-enum libinput_pointer_button_state
-libinput_event_pointer_get_button_state(
+enum libinput_button_state
+libinput_event_pointer_get_button_state(struct libinput_event_pointer *event);
+
+/**
+ * @ingroup event_pointer
+ *
+ * For the button of a LIBINPUT_EVENT_POINTER_BUTTON event, return the total
+ * number of buttons pressed on all devices on the associated seat after the
+ * the event was triggered.
+ *
+ " @note It is an application bug to call this function for events other than
+ * LIBINPUT_EVENT_POINTER_BUTTON. For other events, this function returns 0.
+ *
+ * @return the seat wide pressed button count for the key of this event
+ */
+uint32_t
+libinput_event_pointer_get_seat_button_count(
struct libinput_event_pointer *event);
/**
* @return the axis triggering this event
*/
enum libinput_pointer_axis
-libinput_event_pointer_get_axis(
- struct libinput_event_pointer *event);
+libinput_event_pointer_get_axis(struct libinput_event_pointer *event);
/**
* @ingroup event_pointer
*
* Return the axis value of the given axis. The interpretation of the value
* is dependent on the axis. For the two scrolling axes
- * LIBINPUT_POINTER_AXIS_VERTICAL_SCROLL and
- * LIBINPUT_POINTER_AXIS_HORIZONTAL_SCROLL, the value of the event is in
+ * LIBINPUT_POINTER_AXIS_SCROLL_VERTICAL and
+ * LIBINPUT_POINTER_AXIS_SCROLL_HORIZONTAL, the value of the event is in
* relative scroll units, with the positive direction being down or right,
* respectively. The dimension of a scroll unit is equal to one unit of
* motion in the respective axis, where applicable (e.g. touchpad two-finger
*
* @return the axis value of this event
*/
-li_fixed_t
-libinput_event_pointer_get_axis_value(
- struct libinput_event_pointer *event);
+double
+libinput_event_pointer_get_axis_value(struct libinput_event_pointer *event);
+
+/**
+ * @ingroup event_pointer
+ *
+ * @return The generic libinput_event of this event
+ */
+struct libinput_event *
+libinput_event_pointer_get_base_event(struct libinput_event_pointer *event);
+
/**
* @defgroup event_touch Touch events
* @return The event time for this event
*/
uint32_t
-libinput_event_touch_get_time(
- struct libinput_event_touch *event);
+libinput_event_touch_get_time(struct libinput_event_touch *event);
/**
* @ingroup event_touch
*
- * Get the currently active slot on this device. See the kernel's multitouch
+ * Get the slot of this touch event. See the kernel's multitouch
* protocol B documentation for more information.
*
- * @note this function should not be called for LIBINPUT_EVENT_TOUCH_FRAME.
+ * If the touch event has no assigned slot, for example if it is from a
+ * single touch device, this function returns -1.
+ *
+ * @note this function should not be called for LIBINPUT_EVENT_TOUCH_CANCEL or
+ * LIBINPUT_EVENT_TOUCH_FRAME.
*
- * @return The currently active slot on this multitouch device
+ * @return The slot of this touch event
*/
-uint32_t
-libinput_event_touch_get_slot(
- struct libinput_event_touch *event);
+int32_t
+libinput_event_touch_get_slot(struct libinput_event_touch *event);
+
+/**
+ * @ingroup event_touch
+ *
+ * Get the seat slot of the touch event. A seat slot is a non-negative seat
+ * wide unique identifier of an active touch point.
+ *
+ * Events from single touch devices will be represented as one individual
+ * touch point per device.
+ *
+ * @note this function should not be called for LIBINPUT_EVENT_TOUCH_CANCEL or
+ * LIBINPUT_EVENT_TOUCH_FRAME.
+ *
+ * @return The seat slot of the touch event
+ */
+int32_t
+libinput_event_touch_get_seat_slot(struct libinput_event_touch *event);
+
+/**
+ * @ingroup event_touch
+ *
+ * Return the current absolute x coordinate of the touch event, in mm from
+ * the top left corner of the device. To get the corresponding output screen
+ * coordinate, use libinput_event_touch_get_x_transformed().
+ *
+ * @note this function should only be called for LIBINPUT_EVENT_TOUCH_DOWN and
+ * LIBINPUT_EVENT_TOUCH_MOTION.
+ *
+ * @param event The libinput touch event
+ * @return the current absolute x coordinate
+ */
+double
+libinput_event_touch_get_x(struct libinput_event_touch *event);
/**
* @ingroup event_touch
*
- * @note this function should not be called for LIBINPUT_EVENT_TOUCH_FRAME.
+ * Return the current absolute y coordinate of the touch event, in mm from
+ * the top left corner of the device. To get the corresponding output screen
+ * coordinate, use libinput_event_touch_get_y_transformed().
+ *
+ * For LIBINPUT_EVENT_TOUCH_UP 0 is returned.
+ *
+ * @note this function should only be called for LIBINPUT_EVENT_TOUCH_DOWN and
+ * LIBINPUT_EVENT_TOUCH_MOTION.
*
- * @return the absolute X coordinate on this touch device, scaled to screen coordinates.
+ * @param event The libinput touch event
+ * @return the current absolute y coordinate
*/
-li_fixed_t
-libinput_event_touch_get_x(
- struct libinput_event_touch *event);
+double
+libinput_event_touch_get_y(struct libinput_event_touch *event);
/**
* @ingroup event_touch
*
- * @note this function should not be called for LIBINPUT_EVENT_TOUCH_FRAME.
+ * Return the current absolute x coordinate of the touch event, transformed to
+ * screen coordinates.
*
- * @return the absolute X coordinate on this touch device, scaled to screen coordinates.
+ * @note this function should only be called for LIBINPUT_EVENT_TOUCH_DOWN and
+ * LIBINPUT_EVENT_TOUCH_MOTION.
+ *
+ * @param event The libinput touch event
+ * @param width The current output screen width
+ * @return the current absolute x coordinate transformed to a screen coordinate
*/
-li_fixed_t
-libinput_event_touch_get_y(
- struct libinput_event_touch *event);
+double
+libinput_event_touch_get_x_transformed(struct libinput_event_touch *event,
+ uint32_t width);
/**
* @ingroup event_touch
*
- * @note this function should not be called for LIBINPUT_EVENT_TOUCH_FRAME.
+ * Return the current absolute y coordinate of the touch event, transformed to
+ * screen coordinates.
+ *
+ * @note this function should only be called for LIBINPUT_EVENT_TOUCH_DOWN and
+ * LIBINPUT_EVENT_TOUCH_MOTION.
+ *
+ * @param event The libinput touch event
+ * @param height The current output screen height
+ * @return the current absolute y coordinate transformed to a screen coordinate
+ */
+double
+libinput_event_touch_get_y_transformed(struct libinput_event_touch *event,
+ uint32_t height);
+
+/**
+ * @ingroup event_touch
*
- * @return the type of touch that occured on the device
+ * @return The generic libinput_event of this event
*/
-enum libinput_touch_type
-libinput_event_touch_get_touch_type(
- struct libinput_event_touch *event);
+struct libinput_event *
+libinput_event_touch_get_base_event(struct libinput_event_touch *event);
/**
* @defgroup base Initialization and manipulation of libinput contexts
* @param path The device path to open
* @param flags Flags as defined by open(2)
* @param user_data The user_data provided in
- * libinput_create_from_udev()
+ * libinput_udev_create_context()
*
* @return the file descriptor, or a negative errno on failure.
*/
*
* @param fd The file descriptor to close
* @param user_data The user_data provided in
- * libinput_create_from_udev()
+ * libinput_udev_create_context()
*/
void (*close_restricted)(int fd, void *user_data);
-
- void (*get_current_screen_dimensions)(struct libinput_device *device,
- int *width,
- int *height,
- void *user_data);
};
/**
* @ingroup base
*
- * Create a new libinput context from udev, for input devices matching
- * the given seat ID. New devices or devices removed will appear as events
- * during libinput_dispatch.
+ * Create a new libinput context from udev. This context is inactive until
+ * assigned a seat ID with libinput_udev_assign_seat().
*
* @param interface The callback interface
* @param user_data Caller-specific data passed to the various callback
* interfaces.
* @param udev An already initialized udev context
- * @param seat_id A seat identifier. This string must not be NULL.
*
- * @return An initialized libinput context, ready to handle events or NULL on
- * error.
+ * @return An initialized, but inactive libinput context or NULL on error
*/
struct libinput *
-libinput_create_from_udev(const struct libinput_interface *interface,
- void *user_data,
- struct udev *udev,
+libinput_udev_create_context(const struct libinput_interface *interface,
+ void *user_data,
+ struct udev *udev);
+
+/**
+ * @ingroup base
+ *
+ * Assign a seat to this libinput context. New devices or the removal of
+ * existing devices will appear as events during libinput_dispatch().
+ *
+ * libinput_udev_assign_seat() succeeds even if no input devices are currently
+ * available on this seat, or if devices are available but fail to open in
+ * @ref libinput_interface::open_restricted. Devices that do not have the
+ * minimum capabilities to be recognized as pointer, keyboard or touch
+ * device are ignored. Such devices and those that failed to open
+ * ignored until the next call to libinput_resume().
+ *
+ * This function may only be called once per context.
+ *
+ * @param libinput A libinput context initialized with
+ * libinput_udev_create_context()
+ * @param seat_id A seat identifier. This string must not be NULL.
+ *
+ * @return 0 on success or -1 on failure.
+ */
+int
+libinput_udev_assign_seat(struct libinput *libinput,
const char *seat_id);
+
/**
* @ingroup base
*
- * Create a new libinput context from the given path. This context
- * represents one single device only, it will not respond to new devices
- * being added and reading from the device after it was removed will fail.
+ * Create a new libinput context that requires the caller to manually add or
+ * remove devices with libinput_path_add_device() and
+ * libinput_path_remove_device().
+ *
+ * The context is fully initialized but will not generate events until at
+ * least one device has been added.
+ *
+ * The reference count of the context is initialized to 1. See @ref
+ * libinput_unref.
*
* @param interface The callback interface
* @param user_data Caller-specific data passed to the various callback
* interfaces.
- * @param path Path to an input device
*
- * @return An initialized libinput context, ready to handle events or NULL on
- * error.
+ * @return An initialized, empty libinput context.
*/
struct libinput *
-libinput_create_from_path(const struct libinput_interface *interface,
- void *user_data,
- const char *path);
+libinput_path_create_context(const struct libinput_interface *interface,
+ void *user_data);
+
+/**
+ * @ingroup base
+ *
+ * Add a device to a libinput context initialized with
+ * libinput_path_create_context(). If successful, the device will be
+ * added to the internal list and re-opened on libinput_resume(). The device
+ * can be removed with libinput_path_remove_device().
+ *
+ * If the device was successfully initialized, it is returned in the device
+ * argument. The lifetime of the returned device pointer is limited until
+ * the next libinput_dispatch(), use libinput_device_ref() to keep a permanent
+ * reference.
+ *
+ * @param libinput A previously initialized libinput context
+ * @param path Path to an input device
+ * @return The newly initiated device on success, or NULL on failure.
+ *
+ * @note It is an application bug to call this function on a libinput
+ * context initialized with libinput_udev_create_context().
+ */
+struct libinput_device *
+libinput_path_add_device(struct libinput *libinput,
+ const char *path);
+
+/**
+ * @ingroup base
+ *
+ * Remove a device from a libinput context initialized with
+ * libinput_path_create_context() or added to such a context with
+ * libinput_path_add_device().
+ *
+ * Events already processed from this input device are kept in the queue,
+ * the LIBINPUT_EVENT_DEVICE_REMOVED event marks the end of events for this
+ * device.
+ *
+ * If no matching device exists, this function does nothing.
+ *
+ * @param device A libinput device
+ *
+ * @note It is an application bug to call this function on a libinput
+ * context initialized with libinput_udev_create_context().
+ */
+void
+libinput_path_remove_device(struct libinput_device *device);
/**
* @ingroup base
/**
* @ingroup base
*
- * Destroy the libinput context. After this, object references associated with
- * the destroyed context are invalid and may not be interacted with.
+ * Add a reference to the context. A context is destroyed whenever the
+ * reference count reaches 0. See @ref libinput_unref.
+ *
+ * @param libinput A previously initialized valid libinput context
+ * @return The passed libinput context
+ */
+struct libinput *
+libinput_ref(struct libinput *libinput);
+
+/**
+ * @ingroup base
+ *
+ * Dereference the libinput context. After this, the context may have been
+ * destroyed, if the last reference was dereferenced. If so, the context is
+ * invalid and may not be interacted with.
+ *
+ * @param libinput A previously initialized libinput context
+ * @return NULL if context was destroyed otherwise the passed context
+ */
+struct libinput *
+libinput_unref(struct libinput *libinput);
+
+/**
+ * @ingroup base
+ *
+ * Set the global log priority. Messages with priorities equal to or
+ * higher than the argument will be printed to the current log handler.
+ *
+ * The default log priority is LIBINPUT_LOG_PRIORITY_ERROR.
+ *
+ * @param libinput A previously initialized libinput context
+ * @param priority The minimum priority of log messages to print.
+ *
+ * @see libinput_log_set_handler
+ * @see libinput_log_get_priority
+ */
+void
+libinput_log_set_priority(struct libinput *libinput,
+ enum libinput_log_priority priority);
+
+/**
+ * @ingroup base
+ *
+ * Get the global log priority. Messages with priorities equal to or
+ * higher than the argument will be printed to the current log handler.
+ *
+ * The default log priority is LIBINPUT_LOG_PRIORITY_ERROR.
+ *
+ * @param libinput A previously initialized libinput context
+ * @return The minimum priority of log messages to print.
+ *
+ * @see libinput_log_set_handler
+ * @see libinput_log_set_priority
+ */
+enum libinput_log_priority
+libinput_log_get_priority(const struct libinput *libinput);
+
+/**
+ * @ingroup base
+ *
+ * Log handler type for custom logging.
+ *
+ * @param libinput The libinput context
+ * @param priority The priority of the current message
+ * @param format Message format in printf-style
+ * @param args Message arguments
+ *
+ * @see libinput_set_log_priority
+ * @see libinput_log_set_handler
+ */
+typedef void (*libinput_log_handler)(struct libinput *libinput,
+ enum libinput_log_priority priority,
+ const char *format, va_list args)
+ LIBINPUT_ATTRIBUTE_PRINTF(3, 0);
+
+/**
+ * @ingroup base
+ *
+ * Set the global log handler. Messages with priorities equal to or higher
+ * than the current log priority will be passed to the given
+ * log handler.
+ *
+ * The default log handler prints to stderr.
*
* @param libinput A previously initialized libinput context
+ * @param log_handler The log handler for library messages.
+ * @param user_data Caller-specific data pointer, passed into the log
+ * handler.
+ *
+ * @see libinput_log_set_handler
*/
void
-libinput_destroy(struct libinput *libinput);
+libinput_log_set_handler(struct libinput *libinput,
+ libinput_log_handler log_handler);
/**
* @defgroup seat Initialization and manipulation of seats
* the seat correctly to avoid dangling pointers.
*
* @param seat A previously obtained seat
+ * @return The passed seat
*/
-void
+struct libinput_seat *
libinput_seat_ref(struct libinput_seat *seat);
/**
* the seat correctly to avoid dangling pointers.
*
* @param seat A previously obtained seat
+ * @return NULL if seat was destroyed, otherwise the passed seat
*/
-void
+struct libinput_seat *
libinput_seat_unref(struct libinput_seat *seat);
/**
*
* Return the physical name of the seat. For libinput contexts created from
* udev, this is always the same value as passed into
- * libinput_create_from_udev() and all seats from that context will have the
- * same physical name.
+ * libinput_udev_assign_seat() and all seats from that context will have
+ * the same physical name.
*
* The physical name of the seat is one that is usually set by the system or
* lower levels of the stack. In most cases, this is the base filter for
* the device correctly to avoid dangling pointers.
*
* @param device A previously obtained device
+ * @return The passed device
*/
-void
+struct libinput_device *
libinput_device_ref(struct libinput_device *device);
/**
* the device correctly to avoid dangling pointers.
*
* @param device A previously obtained device
+ * @return NULL if device was destroyed, otherwise the passed device
*/
-void
+struct libinput_device *
libinput_device_unref(struct libinput_device *device);
/**
*
* Get the system name of the device.
*
+ * To get the descriptive device name, use libinput_device_get_name().
+ *
* @param device A previously obtained device
* @return System name of the device
+ *
*/
const char *
libinput_device_get_sysname(struct libinput_device *device);
/**
* @ingroup device
*
+ * The descriptive device name as advertised by the kernel and/or the
+ * hardware itself. To get the sysname for this device, use
+ * libinput_device_get_sysname().
+ *
+ * The lifetime of the returned string is tied to the struct
+ * libinput_device. The string may be the empty string but is never NULL.
+ *
+ * @param device A previously obtained device
+ * @return The device name
+ */
+const char *
+libinput_device_get_name(struct libinput_device *device);
+
+/**
+ * @ingroup device
+ *
+ * Get the product ID for this device.
+ *
+ * @param device A previously obtained device
+ * @return The product ID of this device
+ */
+unsigned int
+libinput_device_get_id_product(struct libinput_device *device);
+
+/**
+ * @ingroup device
+ *
+ * Get the vendor ID for this device.
+ *
+ * @param device A previously obtained device
+ * @return The vendor ID of this device
+ */
+unsigned int
+libinput_device_get_id_vendor(struct libinput_device *device);
+
+/**
+ * @ingroup device
+ *
* A device may be mapped to a single output, or all available outputs. If a
* device is mapped to a single output only, a relative device may not move
* beyond the boundaries of this output. An absolute device has its input
*
* Get the seat associated with this input device.
*
+ * A seat can be uniquely identified by the physical and logical seat name.
+ * There will ever be only one seat instance with a given physical and logical
+ * seat name pair at any given time, but if no external reference is kept, it
+ * may be destroyed if no device belonging to it is left.
+ *
* @param device A previously obtained device
* @return The seat this input device belongs to
*/
* @param device A current input device
* @param keys An array filled with the bitmask for the keys
* @param size Size of the keys array
+ *
+ * @return The number of valid bytes in keys, or a negative errno on failure
*/
int
libinput_device_get_keys(struct libinput_device *device,
libinput_device_has_capability(struct libinput_device *device,
enum libinput_device_capability capability);
+/**
+ * @ingroup device
+ *
+ * Get the physical size of a device in mm, where meaningful. This function
+ * only succeeds on devices with the required data, i.e. tablets, touchpads
+ * and touchscreens.
+ *
+ * If this function returns nonzero, width and height are unmodified.
+ *
+ * @param device The device
+ * @param width Set to the width of the device
+ * @param height Set to the height of the device
+ * @return 0 on success, or nonzero otherwise
+ */
+int
+libinput_device_get_size(struct libinput_device *device,
+ double *width,
+ double *height);
+
+
+/**
+ * @defgroup config Device configuration
+ *
+ * Enable, disable, change and/or check for device-specific features. For
+ * all features, libinput assigns a default based on the hardware
+ * configuration. This default can be obtained with the respective
+ * get_default call.
+ *
+ * Some configuration option may be dependent on or mutually exclusive with
+ * with other options. The behavior in those cases is
+ * implementation-defined, the caller must ensure that the options are set
+ * in the right order.
+ */
+
+/**
+ * @ingroup config
+ *
+ * Status codes returned when applying configuration settings.
+ */
+enum libinput_config_status {
+ LIBINPUT_CONFIG_STATUS_SUCCESS = 0, /**< Config applied successfully */
+ LIBINPUT_CONFIG_STATUS_UNSUPPORTED, /**< Configuration not available on
+ this device */
+ LIBINPUT_CONFIG_STATUS_INVALID, /**< Invalid parameter range */
+};
+
+/**
+ * @ingroup config
+ *
+ * Return a string describing the error.
+ *
+ * @param status The status to translate to a string
+ * @return A human-readable string representing the error or NULL for an
+ * invalid status.
+ */
+const char *
+libinput_config_status_to_str(enum libinput_config_status status);
+
+/**
+ * @ingroup config
+ *
+ * Check if the device supports tap-to-click. See
+ * libinput_device_config_tap_set_enabled() for more information.
+ *
+ * @param device The device to configure
+ * @return The number of fingers that can generate a tap event, or 0 if the
+ * device does not support tapping.
+ *
+ * @see libinput_device_config_tap_set_enabled
+ * @see libinput_device_config_tap_get_enabled
+ * @see libinput_device_config_tap_set_enabled_get_default
+ */
+int
+libinput_device_config_tap_get_finger_count(struct libinput_device *device);
+
+/**
+ * @ingroup config
+ *
+ * Enable or disable tap-to-click on this device, with a default mapping of
+ * 1, 2, 3 finger tap mapping to left, right, middle click, respectively.
+ * Tapping is limited by the number of simultaneous touches
+ * supported by the device, see
+ * libinput_device_config_tap_get_finger_count().
+ *
+ * @param device The device to configure
+ * @param enable Non-zero to enable, zero to disable
+ *
+ * @return A config status code. Disabling tapping on a device that does not
+ * support tapping always succeeds.
+ *
+ * @see libinput_device_config_tap_get_finger_count
+ * @see libinput_device_config_tap_get_enabled
+ * @see libinput_device_config_tap_get_default_enabled
+ */
+enum libinput_config_status
+libinput_device_config_tap_set_enabled(struct libinput_device *device,
+ int enable);
+
+/**
+ * @ingroup config
+ *
+ * Check if tap-to-click is enabled on this device. If the device does not
+ * support tapping, this function always returns 0.
+ *
+ * @param device The device to configure
+ *
+ * @return 1 if enabled, 0 otherwise.
+ *
+ * @see libinput_device_config_tap_get_finger_count
+ * @see libinput_device_config_tap_set_enabled
+ * @see libinput_device_config_tap_get_default_enabled
+ */
+int
+libinput_device_config_tap_get_enabled(struct libinput_device *device);
+
+/**
+ * @ingroup config
+ *
+ * Return the default setting for whether tapping is enabled on this device.
+ *
+ * @param device The device to configure
+ * @return 1 if tapping is enabled by default, or 0 otherwise
+ *
+ * @see libinput_device_config_tap_get_finger_count
+ * @see libinput_device_config_tap_set_enabled
+ * @see libinput_device_config_tap_get_enabled
+ */
+int
+libinput_device_config_tap_get_default_enabled(struct libinput_device *device);
+
+#ifdef __cplusplus
+}
+#endif
#endif /* LIBINPUT_H */