/*
- * Copyright (c) 2017 Samsung Electronics Co., Ltd All Rights Reserved
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
*
* Contact: Jin Yoon <jinny.yoon@samsung.com>
* Geunsun Lee <gs86.lee@samsung.com>
* Eunyoung Lee <ey928.lee@samsung.com>
* Junkyu Han <junkyu.han@samsung.com>
*
- * Licensed under the Apache License, Version 2.0 (the "License");
+ * Licensed under the Flora License, Version 1.1 (the License);
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
- * http://www.apache.org/licenses/LICENSE-2.0
+ * http://floralicense.org/license/
*
* Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
+ * distributed under the License is distributed on an AS IS BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
-
-#include <tizen.h>
-#include <Ecore.h>
-#include <service_app.h>
#include <unistd.h>
#include <glib.h>
+#include <Ecore.h>
+#include <tizen.h>
+#include <service_app.h>
#include "log.h"
-#include "controller.h"
#include "resource.h"
+#include "connectivity.h"
+#include "controller.h"
+#include "controller_util.h"
+#include "webutil.h"
-#define I2C_BUS_1 0x1
-#define GPIO_NOT_USED -1
-#define GPIO_ULTRASONIC_TRIG_NUM_1 20
-#define GPIO_ULTRASONIC_ECHO_NUM_1 21
-#define GPIO_INFRARED_MOTION_NUM_1 4
-#define I2C_ILLUMINANCE_FIRST_PIN_1 3
-
-#define USE_MULTIPLE_SENSOR 1
+#define CONNECTIVITY_KEY "opened"
+#define SENSORING_TIME_INTERVAL 5.0f
+#define CAMERA_TIME_INTERVAL 2
+#define TEST_CAMERA_SAVE 0
+#define CAMERA_ENABLED 0
typedef struct app_data_s {
- Ecore_Timer *getter_timer[PIN_MAX];
+ Ecore_Timer *getter_timer;
+ connectivity_resource_s *resource_info;
} app_data;
-static Eina_Bool _infrared_motion_getter_timer(void *data)
+static void __resource_camera_capture_completed_cb(const void *image, unsigned int size, void *user_data)
{
-#if USE_MULTIPLE_SENSOR
- int gpio_num[3] = { 16, 23, 26 };
- int i = 0;
- int value[3] = { 0, };
-
- for (i = 0; i < 3; i++) {
- if (model_read_infrared_motion_sensor(gpio_num[i], &value[i]) == -1) {
- _E("Failed to get Infrared Motion value [GPIO:%d]", gpio_num[i]);
- continue;
- }
- _I("[GPIO:%d] Infrared Motion Value is [%d]", gpio_num[i], value[i]);
- }
+ /* TODO */
+ const char *path = NULL;
+ const char *url = NULL;
+ controller_util_get_path(&path);
- //@TODO: Send the data to Analyzer using connectivity APIs
+ controller_util_get_image_address(&url);
-#else
- int value = 0;
+ web_util_noti_post_image_data(url, path, image, size);
- retv_if(resource_read_infrared_motion_sensor(GPIO_INFRARED_MOTION_NUM_1, &value) == -1, ECORE_CALLBACK_CANCEL);
- _I("Infrared Motion Value is [%d]", value);
-#endif
+#if TEST_CAMERA_SAVE
+ FILE *fp = NULL;
+ char *data_path = NULL;
+ char file[256];
- return ECORE_CALLBACK_RENEW;
-}
+ data_path = app_get_data_path();
-static Eina_Bool _ultrasonic_getter_timer(void *data)
-{
- double value = 0;
+ snprintf(file, sizeof(file), "%sjjoggoba.jpg", data_path);
+ free(data_path);
+ _D("File : %s", file);
- retv_if(resource_read_ultrasonic_sensor(GPIO_ULTRASONIC_TRIG_NUM_1, GPIO_ULTRASONIC_ECHO_NUM_1, &value) == -1, ECORE_CALLBACK_CANCEL);
- _I("Ultra Sonic Distance is [%d cm]", value);
+ fp = fopen(file, "w");
+ if (!fp) {
+ _E("Failed to open file: %s", file);
+ return;
+ }
- return ECORE_CALLBACK_RENEW;
+ if (fwrite(image, size, 1, fp) != 1) {
+ _E("Failed to write image to file");
+ return;
+ }
+
+ fclose(fp);
+#endif
}
-static Eina_Bool _illuminance_getter_timer(void *data)
+static Eina_Bool control_sensors_cb(void *data)
{
- int value = 0;
+ app_data *ad = data;
+ int value = 1;
+ int ret = 0;
+#if CAMERA_ENABLED
+ static unsigned int count = 0;
+
+ if (count % CAMERA_TIME_INTERVAL == 0) {
+ ret = resource_capture_camera(__resource_camera_capture_completed_cb, NULL);
+ if (ret < 0)
+ _E("Failed to capture camera");
+ }
+
+ count++;
+#endif
- retv_if(resource_read_illuminance_sensor(I2C_BUS_1, &value) == -1, ECORE_CALLBACK_CANCEL);
- _I("Ultra Sonic Distance is [%d lux]", value);
+ /* This is example, get value from sensors first */
+ if (connectivity_notify_int(ad->resource_info, "Motion", value) == -1)
+ _E("Cannot notify message");
return ECORE_CALLBACK_RENEW;
}
static bool service_app_create(void *data)
{
app_data *ad = data;
-
-#if USE_MULTIPLE_SENSOR
- ad->getter_timer[GPIO_INFRARED_MOTION_NUM_1] = ecore_timer_add(3.0, _infrared_motion_getter_timer, ad);
- if (!ad->getter_timer[GPIO_INFRARED_MOTION_NUM_1]) {
- _E("Failed to add infrared motion getter timer");
- return false;
- }
-#else
- /* One Pin Sensor */
- ad->getter_timer[GPIO_INFRARED_MOTION_NUM_1] = ecore_timer_add(3.0, _infrared_motion_getter_timer, ad);
- if (!ad->getter_timer[GPIO_INFRARED_MOTION_NUM_1]) {
- _D("Failed to add infrared motion getter timer");
+ int ret = -1;
+ const char *path = NULL;
+
+ /**
+ * No modification required!!!
+ * Access only when modifying internal functions.
+ */
+ controller_init_internal_functions();
+
+ /**
+ * Create a connectivity resource and registers the resource in server.
+ */
+ connectivity_set_protocol(CONNECTIVITY_PROTOCOL_HTTP);
+
+ controller_util_get_path(&path);
+ if (path == NULL) {
+ _E("Failed to get path");
return false;
}
- /* Two Pins Sensor */
- ad->getter_timer[GPIO_ULTRASONIC_TRIG_NUM_1] = ecore_timer_add(1.0, _ultrasonic_getter_timer, ad);
- if (!ad->getter_timer[GPIO_ULTRASONIC_TRIG_NUM_1]) {
- _D("Failed to add ultra sonic getter timer");
- return false;
- }
+ ret = connectivity_set_resource(path, "org.tizen.door", &ad->resource_info);
+ if (ret == -1) _E("Cannot broadcast resource");
- /* I2C Protocol Sensor */
- ad->getter_timer[I2C_ILLUMINANCE_FIRST_PIN_1] = ecore_timer_add(1.0, _illuminance_getter_timer, ad);
- if (!ad->getter_timer[I2C_ILLUMINANCE_FIRST_PIN_1]) {
- _D("Failed to add ultra sonic getter timer");
+ /**
+ * Creates a timer to call the given function in the given period of time.
+ * In the control_sensors_cb(), each sensor reads the measured value or writes a specific value to the sensor.
+ */
+ ad->getter_timer = ecore_timer_add(SENSORING_TIME_INTERVAL, control_sensors_cb, ad);
+ if (!ad->getter_timer) {
+ _E("Failed to add infrared motion getter timer");
return false;
}
-#endif
- return true;
+ return true;
}
static void service_app_terminate(void *data)
{
app_data *ad = (app_data *)data;
- for (int i = 0; i < PIN_MAX; i++) {
- if (ad->getter_timer[i]) {
- ecore_timer_del(ad->getter_timer[i]);
- }
- }
- resource_close_all();
+ if (ad->getter_timer)
+ ecore_timer_del(ad->getter_timer);
+
+
+ /**
+ * Releases the resource about connectivity.
+ */
+ connectivity_unset_resource(ad->resource_info);
+
+ /**
+ * No modification required!!!
+ * Access only when modifying internal functions.
+ */
+ controller_fini_internal_functions();
+
free(ad);
}
static void service_app_control(app_control_h app_control, void *data)
{
- // Todo: add your code here.
+ // Todo: add your code here.
}
static void service_app_lang_changed(app_event_info_h event_info, void *user_data)
app_event_handler_h handlers[5] = {NULL, };
ad = calloc(1, sizeof(app_data));
+ retv_if(!ad, -1);
event_callback.create = service_app_create;
event_callback.terminate = service_app_terminate;