Merge remote-tracking branch 'asoc/fix/wm8962' into asoc-linus

[platform/adaptation/renesas_rcar/renesas_kernel.git] / sound / soc / codecs / wm8962.c

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 2bf9ee7..48dce72 100644 (file)
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -1758,6 +1758,9 @@ SOC_DOUBLE_R_TLV("EQ4 Volume", WM8962_EQ3, WM8962_EQ23,
                 WM8962_EQL_B4_GAIN_SHIFT, 31, 0, eq_tlv),
 SOC_DOUBLE_R_TLV("EQ5 Volume", WM8962_EQ3, WM8962_EQ23,
                 WM8962_EQL_B5_GAIN_SHIFT, 31, 0, eq_tlv),
+SND_SOC_BYTES("EQL Coefficients", WM8962_EQ4, 18),
+SND_SOC_BYTES("EQR Coefficients", WM8962_EQ24, 18),
+
 
 SOC_SINGLE("3D Switch", WM8962_THREED1, 0, 1, 0),
 SND_SOC_BYTES_MASK("3D Coefficients", WM8962_THREED1, 4, WM8962_THREED_ENA),
@@ -1775,6 +1778,11 @@ WM8962_DSP2_ENABLE("HPF2 Switch", WM8962_HPF2_ENA_SHIFT),
 SND_SOC_BYTES("HPF Coefficients", WM8962_LHPF2, 1),
 WM8962_DSP2_ENABLE("HD Bass Switch", WM8962_HDBASS_ENA_SHIFT),
 SND_SOC_BYTES("HD Bass Coefficients", WM8962_HDBASS_AI_1, 30),
+
+SOC_DOUBLE("ALC Switch", WM8962_ALC1, WM8962_ALCL_ENA_SHIFT,
+               WM8962_ALCR_ENA_SHIFT, 1, 0),
+SND_SOC_BYTES_MASK("ALC Coefficients", WM8962_ALC1, 4,
+               WM8962_ALCL_ENA_MASK | WM8962_ALCR_ENA_MASK),
 };
 
 static const struct snd_kcontrol_new wm8962_spk_mono_controls[] = {
@@ -3616,28 +3624,28 @@ static int wm8962_i2c_probe(struct i2c_client *i2c,
                           0);
 
        /* Apply static configuration for GPIOs */
-       for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++)
-               if (pdata->gpio_init[i]) {
+       for (i = 0; i < ARRAY_SIZE(wm8962->pdata.gpio_init); i++)
+               if (wm8962->pdata.gpio_init[i]) {
                        wm8962_set_gpio_mode(wm8962, i + 1);
                        regmap_write(wm8962->regmap, 0x200 + i,
-                                    pdata->gpio_init[i] & 0xffff);
+                                    wm8962->pdata.gpio_init[i] & 0xffff);
                }
 
 
        /* Put the speakers into mono mode? */
-       if (pdata->spk_mono)
+       if (wm8962->pdata.spk_mono)
                regmap_update_bits(wm8962->regmap, WM8962_CLASS_D_CONTROL_2,
                                   WM8962_SPK_MONO_MASK, WM8962_SPK_MONO);
 
        /* Micbias setup, detection enable and detection
         * threasholds. */
-       if (pdata->mic_cfg)
+       if (wm8962->pdata.mic_cfg)
                regmap_update_bits(wm8962->regmap, WM8962_ADDITIONAL_CONTROL_4,
                                   WM8962_MICDET_ENA |
                                   WM8962_MICDET_THR_MASK |
                                   WM8962_MICSHORT_THR_MASK |
                                   WM8962_MICBIAS_LVL,
-                                  pdata->mic_cfg);
+                                  wm8962->pdata.mic_cfg);
 
        /* Latch volume update bits */
        regmap_update_bits(wm8962->regmap, WM8962_LEFT_INPUT_VOLUME,
@@ -3682,7 +3690,7 @@ static int wm8962_i2c_probe(struct i2c_client *i2c,
        }
 
        if (wm8962->irq) {
-               if (pdata->irq_active_low) {
+               if (wm8962->pdata.irq_active_low) {
                        trigger = IRQF_TRIGGER_LOW;
                        irq_pol = WM8962_IRQ_POL;
                } else {
@@ -3720,6 +3728,8 @@ static int wm8962_i2c_probe(struct i2c_client *i2c,
        if (ret < 0)
                goto err_enable;
 
+       regcache_cache_only(wm8962->regmap, true);
+
        /* The drivers should power up as needed */
        regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies), wm8962->supplies);