#include <signal.h>
+
+#include "sim-main.h"
+#include "sim-options.h"
+#include "sim-hw.h"
+
#include "sysdep.h"
#include "bfd.h"
+#include "sim-assert.h"
+
+
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
-#include "mn10300_sim.h"
+#include "bfd.h"
#ifndef INLINE
#ifdef __GNUC__
#endif
#endif
+
host_callback *mn10300_callback;
int mn10300_debug;
+struct _state State;
-static struct hash_entry *lookup_hash PARAMS ((uint32 ins, int));
-static long hash PARAMS ((long));
-static void init_system PARAMS ((void));
-#define MAX_HASH 63
-struct hash_entry
-{
- struct hash_entry *next;
- long opcode;
- long mask;
- struct simops *ops;
-};
+/* simulation target board. NULL=default configuration */
+static char* board = NULL;
-struct hash_entry hash_table[MAX_HASH+1];
+static DECLARE_OPTION_HANDLER (mn10300_option_handler);
+enum {
+ OPTION_BOARD = OPTION_START,
+};
-/* This probably doesn't do a very good job at bucket filling, but
- it's simple... */
-static INLINE long
-hash(insn)
- long insn;
+static SIM_RC
+mn10300_option_handler (SIM_DESC sd,
+ sim_cpu *cpu,
+ int opt,
+ char *arg,
+ int is_command)
{
- /* These are one byte insns. */
- if ((insn & 0xffffff00) == 0)
+ int cpu_nr;
+ switch (opt)
{
- if ((insn & 0xf0) == 0x00
- || (insn & 0xf0) == 0x40)
- return (insn & 0xf3) & 0x3f;
+ case OPTION_BOARD:
+ {
+ if (arg)
+ {
+ board = zalloc(strlen(arg) + 1);
+ strcpy(board, arg);
+ }
+ return SIM_RC_OK;
+ }
+ }
+
+ return SIM_RC_OK;
+}
- if ((insn & 0xf0) == 0x10
- || (insn & 0xf0) == 0x30
- || (insn & 0xf0) == 0x50)
- return (insn & 0xfc) & 0x3f;
+static const OPTION mn10300_options[] =
+{
+#define BOARD_AM32 "stdeval1"
+ { {"board", required_argument, NULL, OPTION_BOARD},
+ '\0', "none" /* rely on compile-time string concatenation for other options */
+ "|" BOARD_AM32
+ , "Customize simulation for a particular board.", mn10300_option_handler },
+
+ { {NULL, no_argument, NULL, 0}, '\0', NULL, NULL, NULL }
+};
+
+/* For compatibility */
+SIM_DESC simulator;
- if ((insn & 0xf0) == 0x60
- || (insn & 0xf0) == 0x70
- || (insn & 0xf0) == 0x80
- || (insn & 0xf0) == 0x90
- || (insn & 0xf0) == 0xa0
- || (insn & 0xf0) == 0xb0
- || (insn & 0xf0) == 0xe0)
- return (insn & 0xf0) & 0x3f;
+/* These default values correspond to expected usage for the chip. */
- return (insn & 0xff) & 0x3f;
+SIM_DESC
+sim_open (SIM_OPEN_KIND kind,
+ host_callback *cb,
+ struct bfd *abfd,
+ char **argv)
+{
+ SIM_DESC sd = sim_state_alloc (kind, cb);
+ mn10300_callback = cb;
+
+ SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER);
+
+ /* for compatibility */
+ simulator = sd;
+
+ /* FIXME: should be better way of setting up interrupts. For
+ moment, only support watchpoints causing a breakpoint (gdb
+ halt). */
+ STATE_WATCHPOINTS (sd)->pc = &(PC);
+ STATE_WATCHPOINTS (sd)->sizeof_pc = sizeof (PC);
+ STATE_WATCHPOINTS (sd)->interrupt_handler = NULL;
+ STATE_WATCHPOINTS (sd)->interrupt_names = NULL;
+
+ if (sim_pre_argv_init (sd, argv[0]) != SIM_RC_OK)
+ return 0;
+ sim_add_option_table (sd, NULL, mn10300_options);
+
+ /* Allocate core managed memory */
+ sim_do_command (sd, "memory region 0,0x100000");
+ sim_do_command (sd, "memory region 0x40000000,0x200000");
+
+ /* getopt will print the error message so we just have to exit if this fails.
+ FIXME: Hmmm... in the case of gdb we need getopt to call
+ print_filtered. */
+ if (sim_parse_args (sd, argv) != SIM_RC_OK)
+ {
+ /* Uninstall the modules to avoid memory leaks,
+ file descriptor leaks, etc. */
+ sim_module_uninstall (sd);
+ return 0;
}
- /* These are two byte insns */
- if ((insn & 0xffff0000) == 0)
+ if ( NULL != board
+ && (strcmp(board, BOARD_AM32) == 0 ) )
{
- if ((insn & 0xf000) == 0x2000
- || (insn & 0xf000) == 0x5000)
- return ((insn & 0xfc00) >> 8) & 0x3f;
+ /* environment */
+ STATE_ENVIRONMENT (sd) = OPERATING_ENVIRONMENT;
- if ((insn & 0xf000) == 0x4000)
- return ((insn & 0xf300) >> 8) & 0x3f;
+ sim_do_command (sd, "memory region 0x44000000,0x40000");
+ sim_do_command (sd, "memory region 0x48000000,0x400000");
- if ((insn & 0xf000) == 0x8000
- || (insn & 0xf000) == 0x9000
- || (insn & 0xf000) == 0xa000
- || (insn & 0xf000) == 0xb000)
- return ((insn & 0xf000) >> 8) & 0x3f;
+ /* device support for mn1030002 */
+ /* interrupt controller */
- return ((insn & 0xff00) >> 8) & 0x3f;
- }
+ sim_hw_parse (sd, "/mn103int@0x34000100/reg 0x34000100 0x7C 0x34000200 0x8 0x34000280 0x8");
- /* These are three byte insns. */
- if ((insn & 0xff000000) == 0)
+ /* DEBUG: NMI input's */
+ sim_hw_parse (sd, "/glue@0x30000000/reg 0x30000000 12");
+ sim_hw_parse (sd, "/glue@0x30000000 > int0 nmirq /mn103int");
+ sim_hw_parse (sd, "/glue@0x30000000 > int1 watchdog /mn103int");
+ sim_hw_parse (sd, "/glue@0x30000000 > int2 syserr /mn103int");
+
+ /* DEBUG: ACK input */
+ sim_hw_parse (sd, "/glue@0x30002000/reg 0x30002000 4");
+ sim_hw_parse (sd, "/glue@0x30002000 > int ack /mn103int");
+
+ /* DEBUG: LEVEL output */
+ sim_hw_parse (sd, "/glue@0x30004000/reg 0x30004000 8");
+ sim_hw_parse (sd, "/mn103int > nmi int0 /glue@0x30004000");
+ sim_hw_parse (sd, "/mn103int > level int1 /glue@0x30004000");
+
+ /* DEBUG: A bunch of interrupt inputs */
+ sim_hw_parse (sd, "/glue@0x30006000/reg 0x30006000 32");
+ sim_hw_parse (sd, "/glue@0x30006000 > int0 irq-0 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int1 irq-1 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int2 irq-2 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int3 irq-3 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int4 irq-4 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int5 irq-5 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int6 irq-6 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int7 irq-7 /mn103int");
+
+ /* processor interrupt device */
+
+ /* the device */
+ sim_hw_parse (sd, "/mn103cpu@0x20000000");
+ sim_hw_parse (sd, "/mn103cpu@0x20000000/reg 0x20000000 0x42");
+
+ /* DEBUG: ACK output wired upto a glue device */
+ sim_hw_parse (sd, "/glue@0x20002000");
+ sim_hw_parse (sd, "/glue@0x20002000/reg 0x20002000 4");
+ sim_hw_parse (sd, "/mn103cpu > ack int0 /glue@0x20002000");
+
+ /* DEBUG: RESET/NMI/LEVEL wired up to a glue device */
+ sim_hw_parse (sd, "/glue@0x20004000");
+ sim_hw_parse (sd, "/glue@0x20004000/reg 0x20004000 12");
+ sim_hw_parse (sd, "/glue@0x20004000 > int0 reset /mn103cpu");
+ sim_hw_parse (sd, "/glue@0x20004000 > int1 nmi /mn103cpu");
+ sim_hw_parse (sd, "/glue@0x20004000 > int2 level /mn103cpu");
+
+ /* REAL: The processor wired up to the real interrupt controller */
+ sim_hw_parse (sd, "/mn103cpu > ack ack /mn103int");
+ sim_hw_parse (sd, "/mn103int > level level /mn103cpu");
+ sim_hw_parse (sd, "/mn103int > nmi nmi /mn103cpu");
+
+
+ /* PAL */
+
+ /* the device */
+ sim_hw_parse (sd, "/pal@0x31000000");
+ sim_hw_parse (sd, "/pal@0x31000000/reg 0x31000000 64");
+ sim_hw_parse (sd, "/pal@0x31000000/poll? true");
+
+ /* DEBUG: PAL wired up to a glue device */
+ sim_hw_parse (sd, "/glue@0x31002000");
+ sim_hw_parse (sd, "/glue@0x31002000/reg 0x31002000 16");
+ sim_hw_parse (sd, "/pal@0x31000000 > countdown int0 /glue@0x31002000");
+ sim_hw_parse (sd, "/pal@0x31000000 > timer int1 /glue@0x31002000");
+ sim_hw_parse (sd, "/pal@0x31000000 > int int2 /glue@0x31002000");
+ sim_hw_parse (sd, "/glue@0x31002000 > int0 int3 /glue@0x31002000");
+ sim_hw_parse (sd, "/glue@0x31002000 > int1 int3 /glue@0x31002000");
+ sim_hw_parse (sd, "/glue@0x31002000 > int2 int3 /glue@0x31002000");
+
+ /* REAL: The PAL wired up to the real interrupt controller */
+ sim_hw_parse (sd, "/pal@0x31000000 > countdown irq-0 /mn103int");
+ sim_hw_parse (sd, "/pal@0x31000000 > timer irq-1 /mn103int");
+ sim_hw_parse (sd, "/pal@0x31000000 > int irq-2 /mn103int");
+
+ /* 8 and 16 bit timers */
+ sim_hw_parse (sd, "/mn103tim@0x34001000/reg 0x34001000 36 0x34001080 100 0x34004000 16");
+
+ /* Hook timer interrupts up to interrupt controller */
+ sim_hw_parse (sd, "/mn103tim > timer-0-underflow timer-0-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-1-underflow timer-1-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-2-underflow timer-2-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-3-underflow timer-3-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-4-underflow timer-4-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-5-underflow timer-5-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-6-underflow timer-6-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-6-compare-a timer-6-compare-a /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-6-compare-b timer-6-compare-b /mn103int");
+
+
+ /* Serial devices 0,1,2 */
+ sim_hw_parse (sd, "/mn103ser@0x34000800/reg 0x34000800 48");
+ sim_hw_parse (sd, "/mn103ser@0x34000800/poll? true");
+
+ /* Hook serial interrupts up to interrupt controller */
+ sim_hw_parse (sd, "/mn103ser > serial-0-receive serial-0-receive /mn103int");
+ sim_hw_parse (sd, "/mn103ser > serial-0-transmit serial-0-transmit /mn103int");
+ sim_hw_parse (sd, "/mn103ser > serial-1-receive serial-1-receive /mn103int");
+ sim_hw_parse (sd, "/mn103ser > serial-1-transmit serial-1-transmit /mn103int");
+ sim_hw_parse (sd, "/mn103ser > serial-2-receive serial-2-receive /mn103int");
+ sim_hw_parse (sd, "/mn103ser > serial-2-transmit serial-2-transmit /mn103int");
+
+ sim_hw_parse (sd, "/mn103iop@0x36008000/reg 0x36008000 8 0x36008020 8 0x36008040 0xc 0x36008060 8 0x36008080 8");
+
+ /* Memory control registers */
+ sim_do_command (sd, "memory region 0x32000020,0x30");
+ /* Cache control register */
+ sim_do_command (sd, "memory region 0x20000070,0x4");
+ /* Cache purge regions */
+ sim_do_command (sd, "memory region 0x28400000,0x800");
+ sim_do_command (sd, "memory region 0x28401000,0x800");
+ /* DMA registers */
+ sim_do_command (sd, "memory region 0x32000100,0xF");
+ sim_do_command (sd, "memory region 0x32000200,0xF");
+ sim_do_command (sd, "memory region 0x32000400,0xF");
+ sim_do_command (sd, "memory region 0x32000800,0xF");
+ }
+ else
+ {
+ if (board != NULL)
+ {
+ sim_io_eprintf (sd, "Error: Board `%s' unknown.\n", board);
+ return 0;
+ }
+ }
+
+
+
+ /* check for/establish the a reference program image */
+ if (sim_analyze_program (sd,
+ (STATE_PROG_ARGV (sd) != NULL
+ ? *STATE_PROG_ARGV (sd)
+ : NULL),
+ abfd) != SIM_RC_OK)
{
- if ((insn & 0xf00000) == 0x000000)
- return ((insn & 0xf30000) >> 16) & 0x3f;
+ sim_module_uninstall (sd);
+ return 0;
+ }
- if ((insn & 0xf00000) == 0x200000
- || (insn & 0xf00000) == 0x300000)
- return ((insn & 0xfc0000) >> 16) & 0x3f;
+ /* establish any remaining configuration options */
+ if (sim_config (sd) != SIM_RC_OK)
+ {
+ sim_module_uninstall (sd);
+ return 0;
+ }
- return ((insn & 0xff0000) >> 16) & 0x3f;
+ if (sim_post_argv_init (sd) != SIM_RC_OK)
+ {
+ /* Uninstall the modules to avoid memory leaks,
+ file descriptor leaks, etc. */
+ sim_module_uninstall (sd);
+ return 0;
}
- /* These are four byte or larger insns. */
- return ((insn & 0xff000000) >> 24) & 0x3f;
+
+ /* set machine specific configuration */
+/* STATE_CPU (sd, 0)->psw_mask = (PSW_NP | PSW_EP | PSW_ID | PSW_SAT */
+/* | PSW_CY | PSW_OV | PSW_S | PSW_Z); */
+
+ return sd;
}
-static struct hash_entry *
-lookup_hash (ins, length)
- uint32 ins;
- int length;
+
+void
+sim_close (SIM_DESC sd, int quitting)
{
- struct hash_entry *h;
+ sim_module_uninstall (sd);
+}
+
- h = &hash_table[hash(ins)];
+SIM_RC
+sim_create_inferior (SIM_DESC sd,
+ struct bfd *prog_bfd,
+ char **argv,
+ char **env)
+{
+ memset (&State, 0, sizeof (State));
+ if (prog_bfd != NULL) {
+ PC = bfd_get_start_address (prog_bfd);
+ } else {
+ PC = 0;
+ }
+ CIA_SET (STATE_CPU (sd, 0), (unsigned64) PC);
+
+ if (STATE_ARCHITECTURE (sd)->mach == bfd_mach_am33_2)
+ PSW |= PSW_FE;
+
+ return SIM_RC_OK;
+}
+
+void
+sim_do_command (SIM_DESC sd, char *cmd)
+{
+ char *mm_cmd = "memory-map";
+ char *int_cmd = "interrupt";
- while ((ins & h->mask) != h->opcode
- || (length != h->ops->length))
+ if (sim_args_command (sd, cmd) != SIM_RC_OK)
{
- if (h->next == NULL)
- {
- (*mn10300_callback->printf_filtered) (mn10300_callback, "ERROR looking up hash for 0x%x, PC=0x%x\n", ins, PC);
- exit(1);
- }
- h = h->next;
+ if (strncmp (cmd, mm_cmd, strlen (mm_cmd) == 0))
+ sim_io_eprintf (sd, "`memory-map' command replaced by `sim memory'\n");
+ else if (strncmp (cmd, int_cmd, strlen (int_cmd)) == 0)
+ sim_io_eprintf (sd, "`interrupt' command replaced by `sim watch'\n");
+ else
+ sim_io_eprintf (sd, "Unknown command `%s'\n", cmd);
}
- return (h);
}
/* FIXME These would more efficient to use than load_mem/store_mem,
but need to be changed to use the memory map. */
uint8
-get_byte (x)
- uint8 *x;
+get_byte (uint8 *x)
{
return *x;
}
uint16
-get_half (x)
- uint8 *x;
+get_half (uint8 *x)
{
uint8 *a = x;
return (a[1] << 8) + (a[0]);
}
uint32
-get_word (x)
- uint8 *x;
+get_word (uint8 *x)
{
uint8 *a = x;
return (a[3]<<24) + (a[2]<<16) + (a[1]<<8) + (a[0]);
}
void
-put_byte (addr, data)
- uint8 *addr;
- uint8 data;
+put_byte (uint8 *addr, uint8 data)
{
uint8 *a = addr;
a[0] = data;
}
void
-put_half (addr, data)
- uint8 *addr;
- uint16 data;
+put_half (uint8 *addr, uint16 data)
{
uint8 *a = addr;
a[0] = data & 0xff;
}
void
-put_word (addr, data)
- uint8 *addr;
- uint32 data;
+put_word (uint8 *addr, uint32 data)
{
uint8 *a = addr;
a[0] = data & 0xff;
a[3] = (data >> 24) & 0xff;
}
-
-uint32
-load_mem_big (addr, len)
- SIM_ADDR addr;
- int len;
-{
- uint8 *p = addr + State.mem;
-
- switch (len)
- {
- case 1:
- return p[0];
- case 2:
- return p[0] << 8 | p[1];
- case 3:
- return p[0] << 16 | p[1] << 8 | p[2];
- case 4:
- return p[0] << 24 | p[1] << 16 | p[2] << 8 | p[3];
- default:
- abort ();
- }
+int
+sim_fetch_register (SIM_DESC sd,
+ int rn,
+ unsigned char *memory,
+ int length)
+{
+ put_word (memory, State.regs[rn]);
+ return -1;
}
-
-uint32
-load_mem (addr, len)
- SIM_ADDR addr;
- int len;
-{
- uint8 *p = addr + State.mem;
-
- switch (len)
- {
- case 1:
- return p[0];
- case 2:
- return p[1] << 8 | p[0];
- case 3:
- return p[2] << 16 | p[1] << 8 | p[0];
- case 4:
- return p[3] << 24 | p[2] << 16 | p[1] << 8 | p[0];
- default:
- abort ();
- }
+
+int
+sim_store_register (SIM_DESC sd,
+ int rn,
+ unsigned char *memory,
+ int length)
+{
+ State.regs[rn] = get_word (memory);
+ return -1;
}
+
void
-store_mem (addr, len, data)
- SIM_ADDR addr;
- int len;
- uint32 data;
-{
- uint8 *p = addr + State.mem;
-
- switch (len)
- {
- case 1:
- p[0] = data;
- return;
- case 2:
- p[0] = data;
- p[1] = data >> 8;
- return;
- case 4:
- p[0] = data;
- p[1] = data >> 8;
- p[2] = data >> 16;
- p[3] = data >> 24;
- return;
+mn10300_core_signal (SIM_DESC sd,
+ sim_cpu *cpu,
+ sim_cia cia,
+ unsigned map,
+ int nr_bytes,
+ address_word addr,
+ transfer_type transfer,
+ sim_core_signals sig)
+{
+ const char *copy = (transfer == read_transfer ? "read" : "write");
+ address_word ip = CIA_ADDR (cia);
+
+ switch (sig)
+ {
+ case sim_core_unmapped_signal:
+ sim_io_eprintf (sd, "mn10300-core: %d byte %s to unmapped address 0x%lx at 0x%lx\n",
+ nr_bytes, copy,
+ (unsigned long) addr, (unsigned long) ip);
+ program_interrupt(sd, cpu, cia, SIM_SIGSEGV);
+ break;
+
+ case sim_core_unaligned_signal:
+ sim_io_eprintf (sd, "mn10300-core: %d byte %s to unaligned address 0x%lx at 0x%lx\n",
+ nr_bytes, copy,
+ (unsigned long) addr, (unsigned long) ip);
+ program_interrupt(sd, cpu, cia, SIM_SIGBUS);
+ break;
+
default:
- abort ();
+ sim_engine_abort (sd, cpu, cia,
+ "mn10300_core_signal - internal error - bad switch");
}
}
-void
-sim_size (power)
- int power;
+void
+program_interrupt (SIM_DESC sd,
+ sim_cpu *cpu,
+ sim_cia cia,
+ SIM_SIGNAL sig)
{
- if (State.mem)
- free (State.mem);
+ int status;
+ struct hw *device;
+ static int in_interrupt = 0;
- State.mem = (uint8 *) calloc (1, 1 << power);
- if (!State.mem)
+#ifdef SIM_CPU_EXCEPTION_TRIGGER
+ SIM_CPU_EXCEPTION_TRIGGER(sd,cpu,cia);
+#endif
+
+ /* avoid infinite recursion */
+ if (in_interrupt)
{
- (*mn10300_callback->printf_filtered) (mn10300_callback, "Allocation of main memory failed.\n");
- exit (1);
+ (*mn10300_callback->printf_filtered) (mn10300_callback,
+ "ERROR: recursion in program_interrupt during software exception dispatch.");
}
+ else
+ {
+ in_interrupt = 1;
+ /* copy NMI handler code from dv-mn103cpu.c */
+ store_word (SP - 4, CIA_GET (cpu));
+ store_half (SP - 8, PSW);
+
+ /* Set the SYSEF flag in NMICR by backdoor method. See
+ dv-mn103int.c:write_icr(). This is necessary because
+ software exceptions are not modelled by actually talking to
+ the interrupt controller, so it cannot set its own SYSEF
+ flag. */
+ if ((NULL != board) && (strcmp(board, BOARD_AM32) == 0))
+ store_byte (0x34000103, 0x04);
+ }
+
+ PSW &= ~PSW_IE;
+ SP = SP - 8;
+ CIA_SET (cpu, 0x40000008);
+
+ in_interrupt = 0;
+ sim_engine_halt(sd, cpu, NULL, cia, sim_stopped, sig);
}
-static void
-init_system ()
+
+void
+mn10300_cpu_exception_trigger(SIM_DESC sd, sim_cpu* cpu, address_word cia)
{
- if (!State.mem)
- sim_size(18);
+ ASSERT(cpu != NULL);
+
+ if(State.exc_suspended > 0)
+ sim_io_eprintf(sd, "Warning, nested exception triggered (%d)\n", State.exc_suspended);
+
+ CIA_SET (cpu, cia);
+ memcpy(State.exc_trigger_regs, State.regs, sizeof(State.exc_trigger_regs));
+ State.exc_suspended = 0;
}
-int
-sim_write (addr, buffer, size)
- SIM_ADDR addr;
- unsigned char *buffer;
- int size;
+void
+mn10300_cpu_exception_suspend(SIM_DESC sd, sim_cpu* cpu, int exception)
{
- int i;
-
- init_system ();
+ ASSERT(cpu != NULL);
- for (i = 0; i < size; i++)
- store_mem (addr + i, 1, buffer[i]);
+ if(State.exc_suspended > 0)
+ sim_io_eprintf(sd, "Warning, nested exception signal (%d then %d)\n",
+ State.exc_suspended, exception);
- return size;
+ memcpy(State.exc_suspend_regs, State.regs, sizeof(State.exc_suspend_regs));
+ memcpy(State.regs, State.exc_trigger_regs, sizeof(State.regs));
+ CIA_SET (cpu, PC); /* copy PC back from new State.regs */
+ State.exc_suspended = exception;
}
void
-sim_open (args)
- char *args;
+mn10300_cpu_exception_resume(SIM_DESC sd, sim_cpu* cpu, int exception)
{
- struct simops *s;
- struct hash_entry *h;
- if (args != NULL)
+ ASSERT(cpu != NULL);
+
+ if(exception == 0 && State.exc_suspended > 0)
{
-#ifdef DEBUG
- if (strcmp (args, "-t") == 0)
- mn10300_debug = DEBUG;
- else
-#endif
- (*mn10300_callback->printf_filtered) (mn10300_callback, "ERROR: unsupported option(s): %s\n",args);
+ if(State.exc_suspended != SIGTRAP) /* warn not for breakpoints */
+ sim_io_eprintf(sd, "Warning, resuming but ignoring pending exception signal (%d)\n",
+ State.exc_suspended);
}
-
- /* put all the opcodes in the hash table */
- for (s = Simops; s->func; s++)
+ else if(exception != 0 && State.exc_suspended > 0)
{
- h = &hash_table[hash(s->opcode)];
+ if(exception != State.exc_suspended)
+ sim_io_eprintf(sd, "Warning, resuming with mismatched exception signal (%d vs %d)\n",
+ State.exc_suspended, exception);
- /* go to the last entry in the chain */
- while (h->next)
- h = h->next;
-
- if (h->ops)
- {
- h->next = calloc(1,sizeof(struct hash_entry));
- h = h->next;
- }
- h->ops = s;
- h->mask = s->mask;
- h->opcode = s->opcode;
+ memcpy(State.regs, State.exc_suspend_regs, sizeof(State.regs));
+ CIA_SET (cpu, PC); /* copy PC back from new State.regs */
}
+ else if(exception != 0 && State.exc_suspended == 0)
+ {
+ sim_io_eprintf(sd, "Warning, ignoring spontanous exception signal (%d)\n", exception);
+ }
+ State.exc_suspended = 0;
}
-
+/* This is called when an FP instruction is issued when the FP unit is
+ disabled, i.e., the FE bit of PSW is zero. It raises interrupt
+ code 0x1c0. */
void
-sim_close (quitting)
- int quitting;
+fpu_disabled_exception (SIM_DESC sd, sim_cpu *cpu, sim_cia cia)
{
- /* nothing to do */
+ sim_io_eprintf(sd, "FPU disabled exception\n");
+ program_interrupt (sd, cpu, cia, SIM_SIGFPE);
}
+/* This is called when the FP unit is enabled but one of the
+ unimplemented insns is issued. It raises interrupt code 0x1c8. */
void
-sim_set_profile (n)
- int n;
+fpu_unimp_exception (SIM_DESC sd, sim_cpu *cpu, sim_cia cia)
{
- (*mn10300_callback->printf_filtered) (mn10300_callback, "sim_set_profile %d\n", n);
+ sim_io_eprintf(sd, "Unimplemented FPU instruction exception\n");
+ program_interrupt (sd, cpu, cia, SIM_SIGFPE);
}
+/* This is called at the end of any FP insns that may have triggered
+ FP exceptions. If no exception is enabled, it returns immediately.
+ Otherwise, it raises an exception code 0x1d0. */
void
-sim_set_profile_size (n)
- int n;
+fpu_check_signal_exception (SIM_DESC sd, sim_cpu *cpu, sim_cia cia)
{
- (*mn10300_callback->printf_filtered) (mn10300_callback, "sim_set_profile_size %d\n", n);
+ if ((FPCR & EC_MASK) == 0)
+ return;
+
+ sim_io_eprintf(sd, "FPU %s%s%s%s%s exception\n",
+ (FPCR & EC_V) ? "V" : "",
+ (FPCR & EC_Z) ? "Z" : "",
+ (FPCR & EC_O) ? "O" : "",
+ (FPCR & EC_U) ? "U" : "",
+ (FPCR & EC_I) ? "I" : "");
+ program_interrupt (sd, cpu, cia, SIM_SIGFPE);
}
-void
-sim_resume (step, siggnal)
- int step, siggnal;
+/* Convert a 32-bit single-precision FP value in the target platform
+ format to a sim_fpu value. */
+static void
+reg2val_32 (const void *reg, sim_fpu *val)
{
- uint32 inst;
- reg_t oldpc;
- struct hash_entry *h;
+ FS2FPU (*(reg_t *)reg, *val);
+}
- if (step)
- State.exception = SIGTRAP;
- else
- State.exception = 0;
-
- do
- {
- unsigned long insn, extension;
-
- /* Fetch the current instruction. */
- inst = load_mem_big (PC, 1);
- oldpc = PC;
-
- /* These are one byte insns. */
- if ((inst & 0xf3) == 0x00
- || (inst & 0xf0) == 0x10
- || (inst & 0xfc) == 0x3c
- || (inst & 0xf3) == 0x41
- || (inst & 0xf3) == 0x40
- || (inst & 0xfc) == 0x50
- || (inst & 0xfc) == 0x54
- || (inst & 0xf0) == 0x60
- || (inst & 0xf0) == 0x70
- || ((inst & 0xf0) == 0x80
- && (inst & 0x0c) >> 2 != (inst & 0x03))
- || ((inst & 0xf0) == 0x90
- && (inst & 0x0c) >> 2 != (inst & 0x03))
- || ((inst & 0xf0) == 0xa0
- && (inst & 0x0c) >> 2 != (inst & 0x03))
- || ((inst & 0xf0) == 0xb0
- && (inst & 0x0c) >> 2 != (inst & 0x03))
- || (inst & 0xff) == 0xcb
- || (inst & 0xfc) == 0xd0
- || (inst & 0xfc) == 0xd4
- || (inst & 0xfc) == 0xd8
- || (inst & 0xf0) == 0xe0)
- {
- insn = inst;
- h = lookup_hash (insn, 1);
- extension = 0;
- (h->ops->func)(insn, extension);
- PC += 1;
- }
+/* Round the given sim_fpu value to single precision, following the
+ target platform rounding and denormalization conventions. On
+ AM33/2.0, round_near is the only rounding mode. */
+static int
+round_32 (sim_fpu *val)
+{
+ return sim_fpu_round_32 (val, sim_fpu_round_near, sim_fpu_denorm_zero);
+}
- /* These are two byte insns. */
- else if ((inst & 0xf0) == 0x80
- || (inst & 0xf0) == 0x90
- || (inst & 0xf0) == 0xa0
- || (inst & 0xf0) == 0xb0
- || (inst & 0xfc) == 0x20
- || (inst & 0xfc) == 0x28
- || (inst & 0xf3) == 0x43
- || (inst & 0xf3) == 0x42
- || (inst & 0xfc) == 0x58
- || (inst & 0xfc) == 0x5c
- || ((inst & 0xf0) == 0xc0
- && (inst & 0xff) != 0xcb
- && (inst & 0xff) != 0xcc
- && (inst & 0xff) != 0xcd)
- || (inst & 0xff) == 0xf0
- || (inst & 0xff) == 0xf1
- || (inst & 0xff) == 0xf2
- || (inst & 0xff) == 0xf3
- || (inst & 0xff) == 0xf4
- || (inst & 0xff) == 0xf5
- || (inst & 0xff) == 0xf6)
- {
- insn = load_mem_big (PC, 2);
- h = lookup_hash (insn, 2);
- extension = 0;
- (h->ops->func)(insn, extension);
- PC += 2;
- }
+/* Convert a sim_fpu value to the 32-bit single-precision target
+ representation. */
+static void
+val2reg_32 (const sim_fpu *val, void *reg)
+{
+ FPU2FS (*val, *(reg_t *)reg);
+}
- /* These are three byte insns. */
- else if ((inst & 0xff) == 0xf8
- || (inst & 0xff) == 0xcc
- || (inst & 0xff) == 0xf9
- || (inst & 0xf3) == 0x01
- || (inst & 0xf3) == 0x02
- || (inst & 0xf3) == 0x03
- || (inst & 0xfc) == 0x24
- || (inst & 0xfc) == 0x2c
- || (inst & 0xfc) == 0x30
- || (inst & 0xfc) == 0x34
- || (inst & 0xfc) == 0x38
- || (inst & 0xff) == 0xde
- || (inst & 0xff) == 0xdf
- || (inst & 0xff) == 0xcc)
- {
- insn = load_mem_big (PC, 3);
- h = lookup_hash (insn, 3);
- extension = 0;
- (h->ops->func)(insn, extension);
- PC += 3;
- }
+/* Define the 32-bit single-precision conversion and rounding uniform
+ interface. */
+const struct fp_prec_t
+fp_single_prec = {
+ reg2val_32, round_32, val2reg_32
+};
- /* These are four byte insns. */
- else if ((inst & 0xff) == 0xfa
- || (inst & 0xff) == 0xfb)
- {
- insn = load_mem_big (PC, 4);
- h = lookup_hash (insn, 4);
- extension = 0;
- (h->ops->func)();
- PC += 4;
- }
+/* Convert a 64-bit double-precision FP value in the target platform
+ format to a sim_fpu value. */
+static void
+reg2val_64 (const void *reg, sim_fpu *val)
+{
+ FD2FPU (*(dword *)reg, *val);
+}
- /* These are five byte insns. */
- else if ((inst & 0xff) == 0xcd
- || (inst & 0xff) == 0xdc)
- {
- insn = load_mem_big (PC, 4);
- h = lookup_hash (insn, 5);
- extension = load_mem_big (PC + 4, 1);
- (h->ops->func)(insn, extension);
- PC += 5;
- }
+/* Round the given sim_fpu value to double precision, following the
+ target platform rounding and denormalization conventions. On
+ AM33/2.0, round_near is the only rounding mode. */
+int
+round_64 (sim_fpu *val)
+{
+ return sim_fpu_round_64 (val, sim_fpu_round_near, sim_fpu_denorm_zero);
+}
- /* These are six byte insns. */
- else if ((inst & 0xff) == 0xfd
- || (inst & 0xff) == 0xfc)
- {
- insn = load_mem_big (PC, 4);
- h = lookup_hash (insn, 6);
- extension = load_mem_big (PC + 4, 2);
- (h->ops->func)(insn, extension);
- PC += 6;
- }
+/* Convert a sim_fpu value to the 64-bit double-precision target
+ representation. */
+static void
+val2reg_64 (const sim_fpu *val, void *reg)
+{
+ FPU2FD (*val, *(dword *)reg);
+}
+
+/* Define the 64-bit single-precision conversion and rounding uniform
+ interface. */
+const struct fp_prec_t
+fp_double_prec = {
+ reg2val_64, round_64, val2reg_64
+};
+
+/* Define shortcuts to the uniform interface operations. */
+#define REG2VAL(reg,val) (*ops->reg2val) (reg,val)
+#define ROUND(val) (*ops->round) (val)
+#define VAL2REG(val,reg) (*ops->val2reg) (val,reg)
+
+/* Check whether overflow, underflow or inexact exceptions should be
+ raised. */
+int
+fpu_status_ok (sim_fpu_status stat)
+{
+ if ((stat & sim_fpu_status_overflow)
+ && (FPCR & EE_O))
+ FPCR |= EC_O;
+ else if ((stat & (sim_fpu_status_underflow | sim_fpu_status_denorm))
+ && (FPCR & EE_U))
+ FPCR |= EC_U;
+ else if ((stat & (sim_fpu_status_inexact | sim_fpu_status_rounded))
+ && (FPCR & EE_I))
+ FPCR |= EC_I;
+ else if (stat & ~ (sim_fpu_status_overflow
+ | sim_fpu_status_underflow
+ | sim_fpu_status_denorm
+ | sim_fpu_status_inexact
+ | sim_fpu_status_rounded))
+ abort ();
+ else
+ return 1;
+ return 0;
+}
- /* Else its a seven byte insns (in theory). */
+/* Implement a 32/64 bit reciprocal square root, signaling FP
+ exceptions when appropriate. */
+void
+fpu_rsqrt (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
+ const void *reg_in, void *reg_out, const struct fp_prec_t *ops)
+{
+ sim_fpu in, med, out;
+
+ REG2VAL (reg_in, &in);
+ ROUND (&in);
+ FPCR &= ~ EC_MASK;
+ switch (sim_fpu_is (&in))
+ {
+ case SIM_FPU_IS_SNAN:
+ case SIM_FPU_IS_NNUMBER:
+ case SIM_FPU_IS_NINF:
+ if (FPCR & EE_V)
+ FPCR |= EC_V;
+ else
+ VAL2REG (&sim_fpu_qnan, reg_out);
+ break;
+
+ case SIM_FPU_IS_QNAN:
+ VAL2REG (&sim_fpu_qnan, reg_out);
+ break;
+
+ case SIM_FPU_IS_PINF:
+ VAL2REG (&sim_fpu_zero, reg_out);
+ break;
+
+ case SIM_FPU_IS_PNUMBER:
+ {
+ /* Since we don't have a function to compute rsqrt directly,
+ use sqrt and inv. */
+ sim_fpu_status stat = 0;
+ stat |= sim_fpu_sqrt (&med, &in);
+ stat |= sim_fpu_inv (&out, &med);
+ stat |= ROUND (&out);
+ if (fpu_status_ok (stat))
+ VAL2REG (&out, reg_out);
+ }
+ break;
+
+ case SIM_FPU_IS_NZERO:
+ case SIM_FPU_IS_PZERO:
+ if (FPCR & EE_Z)
+ FPCR |= EC_Z;
else
{
- insn = load_mem_big (PC, 4);
- h = lookup_hash (insn, 7);
- extension = load_mem_big (PC + 4, 3);
- (h->ops->func)(insn, extension);
- PC += 7;
+ /* Generate an INF with the same sign. */
+ sim_fpu_inv (&out, &in);
+ VAL2REG (&out, reg_out);
}
+ break;
+
+ default:
+ abort ();
}
- while (!State.exception);
+
+ fpu_check_signal_exception (sd, cpu, cia);
}
-int
-sim_trace ()
+static inline reg_t
+cmp2fcc (int res)
{
-#ifdef DEBUG
- mn10300_debug = DEBUG;
-#endif
- sim_resume (0, 0);
- return 1;
+ switch (res)
+ {
+ case SIM_FPU_IS_SNAN:
+ case SIM_FPU_IS_QNAN:
+ return FCC_U;
+
+ case SIM_FPU_IS_NINF:
+ case SIM_FPU_IS_NNUMBER:
+ case SIM_FPU_IS_NDENORM:
+ return FCC_L;
+
+ case SIM_FPU_IS_PINF:
+ case SIM_FPU_IS_PNUMBER:
+ case SIM_FPU_IS_PDENORM:
+ return FCC_G;
+
+ case SIM_FPU_IS_NZERO:
+ case SIM_FPU_IS_PZERO:
+ return FCC_E;
+
+ default:
+ abort ();
+ }
}
+/* Implement a 32/64 bit FP compare, setting the FPCR status and/or
+ exception bits as specified. */
void
-sim_info (verbose)
- int verbose;
+fpu_cmp (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
+ const void *reg_in1, const void *reg_in2,
+ const struct fp_prec_t *ops)
{
- (*mn10300_callback->printf_filtered) (mn10300_callback, "sim_info\n");
+ sim_fpu m, n;
+
+ REG2VAL (reg_in1, &m);
+ REG2VAL (reg_in2, &n);
+ FPCR &= ~ EC_MASK;
+ FPCR &= ~ FCC_MASK;
+ ROUND (&m);
+ ROUND (&n);
+ if (sim_fpu_is_snan (&m) || sim_fpu_is_snan (&n))
+ {
+ if (FPCR & EE_V)
+ FPCR |= EC_V;
+ else
+ FPCR |= FCC_U;
+ }
+ else
+ FPCR |= cmp2fcc (sim_fpu_cmp (&m, &n));
+
+ fpu_check_signal_exception (sd, cpu, cia);
}
+/* Implement a 32/64 bit FP add, setting FP exception bits when
+ appropriate. */
void
-sim_create_inferior (start_address, argv, env)
- SIM_ADDR start_address;
- char **argv;
- char **env;
+fpu_add (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
+ const void *reg_in1, const void *reg_in2,
+ void *reg_out, const struct fp_prec_t *ops)
{
- PC = start_address;
+ sim_fpu m, n, r;
+
+ REG2VAL (reg_in1, &m);
+ REG2VAL (reg_in2, &n);
+ ROUND (&m);
+ ROUND (&n);
+ FPCR &= ~ EC_MASK;
+ if (sim_fpu_is_snan (&m) || sim_fpu_is_snan (&n)
+ || (sim_fpu_is (&m) == SIM_FPU_IS_PINF
+ && sim_fpu_is (&n) == SIM_FPU_IS_NINF)
+ || (sim_fpu_is (&m) == SIM_FPU_IS_NINF
+ && sim_fpu_is (&n) == SIM_FPU_IS_PINF))
+ {
+ if (FPCR & EE_V)
+ FPCR |= EC_V;
+ else
+ VAL2REG (&sim_fpu_qnan, reg_out);
+ }
+ else
+ {
+ sim_fpu_status stat = sim_fpu_add (&r, &m, &n);
+ stat |= ROUND (&r);
+ if (fpu_status_ok (stat))
+ VAL2REG (&r, reg_out);
+ }
+
+ fpu_check_signal_exception (sd, cpu, cia);
}
+/* Implement a 32/64 bit FP sub, setting FP exception bits when
+ appropriate. */
void
-sim_kill ()
+fpu_sub (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
+ const void *reg_in1, const void *reg_in2,
+ void *reg_out, const struct fp_prec_t *ops)
{
- /* nothing to do */
+ sim_fpu m, n, r;
+
+ REG2VAL (reg_in1, &m);
+ REG2VAL (reg_in2, &n);
+ ROUND (&m);
+ ROUND (&n);
+ FPCR &= ~ EC_MASK;
+ if (sim_fpu_is_snan (&m) || sim_fpu_is_snan (&n)
+ || (sim_fpu_is (&m) == SIM_FPU_IS_PINF
+ && sim_fpu_is (&n) == SIM_FPU_IS_PINF)
+ || (sim_fpu_is (&m) == SIM_FPU_IS_NINF
+ && sim_fpu_is (&n) == SIM_FPU_IS_NINF))
+ {
+ if (FPCR & EE_V)
+ FPCR |= EC_V;
+ else
+ VAL2REG (&sim_fpu_qnan, reg_out);
+ }
+ else
+ {
+ sim_fpu_status stat = sim_fpu_sub (&r, &m, &n);
+ stat |= ROUND (&r);
+ if (fpu_status_ok (stat))
+ VAL2REG (&r, reg_out);
+ }
+
+ fpu_check_signal_exception (sd, cpu, cia);
}
+/* Implement a 32/64 bit FP mul, setting FP exception bits when
+ appropriate. */
void
-sim_set_callbacks (p)
- host_callback *p;
+fpu_mul (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
+ const void *reg_in1, const void *reg_in2,
+ void *reg_out, const struct fp_prec_t *ops)
{
- mn10300_callback = p;
+ sim_fpu m, n, r;
+
+ REG2VAL (reg_in1, &m);
+ REG2VAL (reg_in2, &n);
+ ROUND (&m);
+ ROUND (&n);
+ FPCR &= ~ EC_MASK;
+ if (sim_fpu_is_snan (&m) || sim_fpu_is_snan (&n)
+ || (sim_fpu_is_infinity (&m) && sim_fpu_is_zero (&n))
+ || (sim_fpu_is_zero (&m) && sim_fpu_is_infinity (&n)))
+ {
+ if (FPCR & EE_V)
+ FPCR |= EC_V;
+ else
+ VAL2REG (&sim_fpu_qnan, reg_out);
+ }
+ else
+ {
+ sim_fpu_status stat = sim_fpu_mul (&r, &m, &n);
+ stat |= ROUND (&r);
+ if (fpu_status_ok (stat))
+ VAL2REG (&r, reg_out);
+ }
+
+ fpu_check_signal_exception (sd, cpu, cia);
}
-/* All the code for exiting, signals, etc needs to be revamped.
-
- This is enough to get c-torture limping though. */
-
+/* Implement a 32/64 bit FP div, setting FP exception bits when
+ appropriate. */
void
-sim_stop_reason (reason, sigrc)
- enum sim_stop *reason;
- int *sigrc;
+fpu_div (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
+ const void *reg_in1, const void *reg_in2,
+ void *reg_out, const struct fp_prec_t *ops)
{
- *reason = sim_stopped;
- if (State.exception == SIGQUIT)
- *sigrc = 0;
+ sim_fpu m, n, r;
+
+ REG2VAL (reg_in1, &m);
+ REG2VAL (reg_in2, &n);
+ ROUND (&m);
+ ROUND (&n);
+ FPCR &= ~ EC_MASK;
+ if (sim_fpu_is_snan (&m) || sim_fpu_is_snan (&n)
+ || (sim_fpu_is_infinity (&m) && sim_fpu_is_infinity (&n))
+ || (sim_fpu_is_zero (&m) && sim_fpu_is_zero (&n)))
+ {
+ if (FPCR & EE_V)
+ FPCR |= EC_V;
+ else
+ VAL2REG (&sim_fpu_qnan, reg_out);
+ }
+ else if (sim_fpu_is_number (&m) && sim_fpu_is_zero (&n)
+ && (FPCR & EE_Z))
+ FPCR |= EC_Z;
else
- *sigrc = State.exception;
+ {
+ sim_fpu_status stat = sim_fpu_div (&r, &m, &n);
+ stat |= ROUND (&r);
+ if (fpu_status_ok (stat))
+ VAL2REG (&r, reg_out);
+ }
+
+ fpu_check_signal_exception (sd, cpu, cia);
}
+/* Implement a 32/64 bit FP madd, setting FP exception bits when
+ appropriate. */
void
-sim_fetch_register (rn, memory)
- int rn;
- unsigned char *memory;
+fpu_fmadd (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
+ const void *reg_in1, const void *reg_in2, const void *reg_in3,
+ void *reg_out, const struct fp_prec_t *ops)
{
- put_word (memory, State.regs[rn]);
+ sim_fpu m1, m2, m, n, r;
+
+ REG2VAL (reg_in1, &m1);
+ REG2VAL (reg_in2, &m2);
+ REG2VAL (reg_in3, &n);
+ ROUND (&m1);
+ ROUND (&m2);
+ ROUND (&n);
+ FPCR &= ~ EC_MASK;
+ if (sim_fpu_is_snan (&m1) || sim_fpu_is_snan (&m2) || sim_fpu_is_snan (&n)
+ || (sim_fpu_is_infinity (&m1) && sim_fpu_is_zero (&m2))
+ || (sim_fpu_is_zero (&m1) && sim_fpu_is_infinity (&m2)))
+ {
+ invalid_operands:
+ if (FPCR & EE_V)
+ FPCR |= EC_V;
+ else
+ VAL2REG (&sim_fpu_qnan, reg_out);
+ }
+ else
+ {
+ sim_fpu_status stat = sim_fpu_mul (&m, &m1, &m2);
+
+ if (sim_fpu_is_infinity (&m) && sim_fpu_is_infinity (&n)
+ && sim_fpu_sign (&m) != sim_fpu_sign (&n))
+ goto invalid_operands;
+
+ stat |= sim_fpu_add (&r, &m, &n);
+ stat |= ROUND (&r);
+ if (fpu_status_ok (stat))
+ VAL2REG (&r, reg_out);
+ }
+
+ fpu_check_signal_exception (sd, cpu, cia);
}
-
+
+/* Implement a 32/64 bit FP msub, setting FP exception bits when
+ appropriate. */
void
-sim_store_register (rn, memory)
- int rn;
- unsigned char *memory;
+fpu_fmsub (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
+ const void *reg_in1, const void *reg_in2, const void *reg_in3,
+ void *reg_out, const struct fp_prec_t *ops)
{
- State.regs[rn] = get_word (memory);
-}
+ sim_fpu m1, m2, m, n, r;
+
+ REG2VAL (reg_in1, &m1);
+ REG2VAL (reg_in2, &m2);
+ REG2VAL (reg_in3, &n);
+ ROUND (&m1);
+ ROUND (&m2);
+ ROUND (&n);
+ FPCR &= ~ EC_MASK;
+ if (sim_fpu_is_snan (&m1) || sim_fpu_is_snan (&m2) || sim_fpu_is_snan (&n)
+ || (sim_fpu_is_infinity (&m1) && sim_fpu_is_zero (&m2))
+ || (sim_fpu_is_zero (&m1) && sim_fpu_is_infinity (&m2)))
+ {
+ invalid_operands:
+ if (FPCR & EE_V)
+ FPCR |= EC_V;
+ else
+ VAL2REG (&sim_fpu_qnan, reg_out);
+ }
+ else
+ {
+ sim_fpu_status stat = sim_fpu_mul (&m, &m1, &m2);
-int
-sim_read (addr, buffer, size)
- SIM_ADDR addr;
- unsigned char *buffer;
- int size;
-{
- int i;
- for (i = 0; i < size; i++)
- buffer[i] = load_mem (addr + i, 1);
+ if (sim_fpu_is_infinity (&m) && sim_fpu_is_infinity (&n)
+ && sim_fpu_sign (&m) == sim_fpu_sign (&n))
+ goto invalid_operands;
- return size;
-}
+ stat |= sim_fpu_sub (&r, &m, &n);
+ stat |= ROUND (&r);
+ if (fpu_status_ok (stat))
+ VAL2REG (&r, reg_out);
+ }
+
+ fpu_check_signal_exception (sd, cpu, cia);
+}
+/* Implement a 32/64 bit FP nmadd, setting FP exception bits when
+ appropriate. */
void
-sim_do_command (cmd)
- char *cmd;
+fpu_fnmadd (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
+ const void *reg_in1, const void *reg_in2, const void *reg_in3,
+ void *reg_out, const struct fp_prec_t *ops)
{
- (*mn10300_callback->printf_filtered) (mn10300_callback, "\"%s\" is not a valid mn10300 simulator command.\n", cmd);
+ sim_fpu m1, m2, m, mm, n, r;
+
+ REG2VAL (reg_in1, &m1);
+ REG2VAL (reg_in2, &m2);
+ REG2VAL (reg_in3, &n);
+ ROUND (&m1);
+ ROUND (&m2);
+ ROUND (&n);
+ FPCR &= ~ EC_MASK;
+ if (sim_fpu_is_snan (&m1) || sim_fpu_is_snan (&m2) || sim_fpu_is_snan (&n)
+ || (sim_fpu_is_infinity (&m1) && sim_fpu_is_zero (&m2))
+ || (sim_fpu_is_zero (&m1) && sim_fpu_is_infinity (&m2)))
+ {
+ invalid_operands:
+ if (FPCR & EE_V)
+ FPCR |= EC_V;
+ else
+ VAL2REG (&sim_fpu_qnan, reg_out);
+ }
+ else
+ {
+ sim_fpu_status stat = sim_fpu_mul (&m, &m1, &m2);
+
+ if (sim_fpu_is_infinity (&m) && sim_fpu_is_infinity (&n)
+ && sim_fpu_sign (&m) == sim_fpu_sign (&n))
+ goto invalid_operands;
+
+ stat |= sim_fpu_neg (&mm, &m);
+ stat |= sim_fpu_add (&r, &mm, &n);
+ stat |= ROUND (&r);
+ if (fpu_status_ok (stat))
+ VAL2REG (&r, reg_out);
+ }
+
+ fpu_check_signal_exception (sd, cpu, cia);
}
-int
-sim_load (prog, from_tty)
- char *prog;
- int from_tty;
+/* Implement a 32/64 bit FP nmsub, setting FP exception bits when
+ appropriate. */
+void
+fpu_fnmsub (SIM_DESC sd, sim_cpu *cpu, sim_cia cia,
+ const void *reg_in1, const void *reg_in2, const void *reg_in3,
+ void *reg_out, const struct fp_prec_t *ops)
{
- /* Return nonzero so GDB will handle it. */
- return 1;
-}
+ sim_fpu m1, m2, m, mm, n, r;
+
+ REG2VAL (reg_in1, &m1);
+ REG2VAL (reg_in2, &m2);
+ REG2VAL (reg_in3, &n);
+ ROUND (&m1);
+ ROUND (&m2);
+ ROUND (&n);
+ FPCR &= ~ EC_MASK;
+ if (sim_fpu_is_snan (&m1) || sim_fpu_is_snan (&m2) || sim_fpu_is_snan (&n)
+ || (sim_fpu_is_infinity (&m1) && sim_fpu_is_zero (&m2))
+ || (sim_fpu_is_zero (&m1) && sim_fpu_is_infinity (&m2)))
+ {
+ invalid_operands:
+ if (FPCR & EE_V)
+ FPCR |= EC_V;
+ else
+ VAL2REG (&sim_fpu_qnan, reg_out);
+ }
+ else
+ {
+ sim_fpu_status stat = sim_fpu_mul (&m, &m1, &m2);
+
+ if (sim_fpu_is_infinity (&m) && sim_fpu_is_infinity (&n)
+ && sim_fpu_sign (&m) != sim_fpu_sign (&n))
+ goto invalid_operands;
+
+ stat |= sim_fpu_neg (&mm, &m);
+ stat |= sim_fpu_sub (&r, &mm, &n);
+ stat |= ROUND (&r);
+ if (fpu_status_ok (stat))
+ VAL2REG (&r, reg_out);
+ }
+
+ fpu_check_signal_exception (sd, cpu, cia);
+}