-/* This file is part of the program GDB, the GU debugger.
+/* This file is part of the program GDB, the GNU debugger.
- Copyright (C) 1998 Free Software Foundation, Inc.
+ Copyright (C) 1998, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
Contributed by Cygnus Solutions.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
-
+
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
+
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "sim-main.h"
-#include "hw-base.h"
+#include "hw-main.h"
+#include "sim-hw.h"
/* DEVICE
- mn103int - mn10300 interrupt controller
+ mn103int - mn103002 interrupt controller
DESCRIPTION
- Implements the mn10300 interrupt controller described in the
- mn10300 user guide.
+ Implements the mn103002 interrupt controller described in the
+ mn103002 user guide.
PROPERTIES
reg = <icr-adr> <icr-siz> <iagr-adr> <iadr-siz> <extmd-adr> <extmd-siz>
- Specify the address of the ICR (total of 25 registers), IAGR and
+ Specify the address of the ICR (total of 30 registers), IAGR and
EXTMD registers (within the parent bus).
- The reg property value `0x34000100 0x68 0x34000200 0x8 0x3400280
+ The reg property value `0x34000100 0x7C 0x34000200 0x8 0x3400280
0x8' locates the interrupt controller at the addresses specified in
- the mn10300 interrupt controller user guide.
+ the mn103002 interrupt controller user guide.
PORTS
int[0..100] (input)
- Level or edge triggered interrupt input port. Each of the 25
- groups (0..24) can have up to 4 (0..3) interrupt inputs. The
+ Level or edge triggered interrupt input port. Each of the 30
+ groups (0..30) can have up to 4 (0..3) interrupt inputs. The
interpretation of a port event/value is determined by the
configuration of the corresponding interrupt group.
edges. Instead any input port event is considered to be an
interrupt trigger.
- For level sensative interrupts, the interrupt controller ignores
+ For level sensitive interrupts, the interrupt controller ignores
active HIGH/LOW settings and instead always interprets a nonzero
- port value as an interupt assertion and a zero port value as a
+ port value as an interrupt assertion and a zero port value as a
negation.
*/
-/* The interrupt groups - numbered according to mn10300 convention */
+/* The interrupt groups - numbered according to mn103002 convention */
enum mn103int_trigger {
ACTIVE_LOW,
FIRST_NMI_GROUP = 0,
LAST_NMI_GROUP = 1,
FIRST_LEVEL_GROUP = 2,
- LAST_LEVEL_GROUP = 24,
+ LAST_LEVEL_GROUP = 30,
NR_GROUPS,
};
G21_PORT = 84,
G22_PORT = 88,
G23_PORT = 92,
+ IRQ0_PORT = G23_PORT,
G24_PORT = 96,
- NR_G_PORTS = 100,
+ G25_PORT = 100,
+ G26_PORT = 104,
+ G27_PORT = 108,
+ IRQ4_PORT = G27_PORT,
+ G28_PORT = 112,
+ G29_PORT = 116,
+ G30_PORT = 120,
+ NR_G_PORTS = 124,
ACK_PORT,
};
{ "watchdog", G0_PORT + 1, 0, input_port, },
{ "syserr", G0_PORT + 2, 0, input_port, },
- { "timer-0-underflow", G2_PORT + 0, 0, input_port, },
- { "timer-1-underflow", G2_PORT + 1, 0, input_port, },
- { "timer-2-underflow", G2_PORT + 2, 0, input_port, },
- { "timer-3-underflow", G2_PORT + 3, 0, input_port, },
- { "timer-4-underflow", G3_PORT + 0, 0, input_port, },
- { "timer-5-underflow", G3_PORT + 1, 0, input_port, },
- { "timer-6-underflow", G3_PORT + 2, 0, input_port, },
- { "timer-7-underflow", G3_PORT + 3, 0, input_port, },
-
- { "timer-8-underflow", G4_PORT + 0, 0, input_port, },
- { "timer-8-compare-a", G4_PORT + 1, 0, input_port, },
- { "timer-8-compare-b", G4_PORT + 2, 0, input_port, },
-
- { "timer-9-underflow", G5_PORT + 0, 0, input_port, },
- { "timer-9-compare-a", G5_PORT + 1, 0, input_port, },
- { "timer-9-compare-b", G5_PORT + 2, 0, input_port, },
-
- { "timer-10-underflow", G6_PORT + 0, 0, input_port, },
- { "timer-10-compare-a", G6_PORT + 1, 0, input_port, },
- { "timer-10-compare-b", G6_PORT + 2, 0, input_port, },
- { "timer-10-compare-c", G6_PORT + 3, 0, input_port, },
-
- { "timer-11-underflow", G7_PORT + 0, 0, input_port, },
- { "timer-11-compare-a", G7_PORT + 1, 0, input_port, },
- { "timer-11-compare-b", G7_PORT + 2, 0, input_port, },
- { "timer-11-compare-c", G7_PORT + 3, 0, input_port, },
-
- { "timer-12-underflow", G8_PORT + 0, 0, input_port, },
- { "timer-12-compare-a", G8_PORT + 1, 0, input_port, },
- { "timer-12-compare-b", G8_PORT + 2, 0, input_port, },
- { "timer-12-compare-c", G8_PORT + 3, 0, input_port, },
-
- { "timer-11-compare-d", G9_PORT + 0, 0, input_port, },
- { "timer-12-compare-d", G9_PORT + 1, 0, input_port, },
-
- { "dma-0-end", G10_PORT, 0, input_port, },
- { "dma-1-end", G11_PORT, 0, input_port, },
- { "dma-2-end", G12_PORT, 0, input_port, },
- { "dma-3-end", G13_PORT, 0, input_port, },
-
- { "serial-0-recieve", G14_PORT + 0, 0, input_port, },
- { "serial-0-transmit", G14_PORT + 1, 0, input_port, },
-
- { "serial-1-recieve", G15_PORT + 0, 0, input_port, },
- { "serial-1-transmit", G15_PORT + 1, 0, input_port, },
-
- { "irq-0", G16_PORT, 0, input_port, },
- { "irq-1", G17_PORT, 0, input_port, },
- { "irq-2", G18_PORT, 0, input_port, },
- { "irq-3", G19_PORT, 0, input_port, },
- { "irq-4", G20_PORT, 0, input_port, },
- { "irq-5", G21_PORT, 0, input_port, },
- { "irq-6", G22_PORT, 0, input_port, },
- { "irq-7", G23_PORT, 0, input_port, },
-
- { "ad-end", G24_PORT, 0, input_port, },
+ { "timer-0-underflow", G2_PORT, 0, input_port, },
+ { "timer-1-underflow", G3_PORT, 0, input_port, },
+ { "timer-2-underflow", G4_PORT, 0, input_port, },
+ { "timer-3-underflow", G5_PORT, 0, input_port, },
+ { "timer-4-underflow", G6_PORT, 0, input_port, },
+ { "timer-5-underflow", G7_PORT, 0, input_port, },
+ { "timer-6-underflow", G8_PORT, 0, input_port, },
+
+ { "timer-6-compare-a", G9_PORT, 0, input_port, },
+ { "timer-6-compare-b", G10_PORT, 0, input_port, },
+
+ { "dma-0-end", G12_PORT, 0, input_port, },
+ { "dma-1-end", G13_PORT, 0, input_port, },
+ { "dma-2-end", G14_PORT, 0, input_port, },
+ { "dma-3-end", G15_PORT, 0, input_port, },
+
+ { "serial-0-receive", G16_PORT, 0, input_port, },
+ { "serial-0-transmit", G17_PORT, 0, input_port, },
+
+ { "serial-1-receive", G18_PORT, 0, input_port, },
+ { "serial-1-transmit", G19_PORT, 0, input_port, },
+
+ { "serial-2-receive", G20_PORT, 0, input_port, },
+ { "serial-2-transmit", G21_PORT, 0, input_port, },
+
+ { "irq-0", G23_PORT, 0, input_port, },
+ { "irq-1", G24_PORT, 0, input_port, },
+ { "irq-2", G25_PORT, 0, input_port, },
+ { "irq-3", G26_PORT, 0, input_port, },
+ { "irq-4", G27_PORT, 0, input_port, },
+ { "irq-5", G28_PORT, 0, input_port, },
+ { "irq-6", G29_PORT, 0, input_port, },
+ { "irq-7", G30_PORT, 0, input_port, },
/* interrupt inputs (as generic numbers) */
/* Finish off the partially created hw device. Attach our local
callbacks. Wire up our port names etc */
-static hw_io_read_buffer_callback mn103int_io_read_buffer;
-static hw_io_write_buffer_callback mn103int_io_write_buffer;
-static hw_port_event_callback mn103int_port_event;
+static hw_io_read_buffer_method mn103int_io_read_buffer;
+static hw_io_write_buffer_method mn103int_io_write_buffer;
+static hw_port_event_method mn103int_port_event;
+static hw_ioctl_method mn103int_ioctl;
+
+
static void
attach_mn103int_regs (struct hw *me,
set_hw_io_write_buffer (me, mn103int_io_write_buffer);
set_hw_ports (me, mn103int_ports);
set_hw_port_event (me, mn103int_port_event);
+ me->to_ioctl = mn103int_ioctl;
/* Attach ourself to our parent bus */
attach_mn103int_regs (me, controller);
for (gid = 0; gid < NR_GROUPS; gid++)
{
struct mn103int_group *group = &controller->group[gid];
- group->enable = 0xf;
group->trigger = NEGATIVE_EDGE;
group->gid = gid;
if (FIRST_NMI_GROUP <= gid && gid <= LAST_NMI_GROUP)
{
+ group->enable = 0xf;
group->type = NMI_GROUP;
}
else if (FIRST_LEVEL_GROUP <= gid && gid <= LAST_LEVEL_GROUP)
{
+ group->enable = 0x0;
group->type = LEVEL_GROUP;
}
else
group->gid, val));
group->request &= ~EXTRACT_ID (val);
break;
+ /* Special backdoor access to SYSEF flag from CPU. See
+ interp.c:program_interrupt(). */
+ case 3:
+ HW_TRACE ((me, "write-icr-special group=%d:0 nmi 0x%02x",
+ group->gid, val));
+ group->request |= EXTRACT_ID (val);
default:
break;
}
switch (offset)
{
case 0:
- return &controller->group[16];
+ return &controller->group[IRQ0_PORT/4];
case 1:
- return &controller->group[20];
+ return &controller->group[IRQ4_PORT/4];
default:
return NULL;
}
return nr_bytes;
}
+static int
+mn103int_ioctl(struct hw *me,
+ hw_ioctl_request request,
+ va_list ap)
+{
+ struct mn103int *controller = (struct mn103int *)hw_data(me);
+ controller->group[0].request = EXTRACT_ID(4);
+ mn103int_port_event(me, 2 /* nmi_port(syserr) */, NULL, 0, 0);
+ return 0;
+}
+
-const struct hw_device_descriptor dv_mn103int_descriptor[] = {
+const struct hw_descriptor dv_mn103int_descriptor[] = {
{ "mn103int", mn103int_finish, },
{ NULL },
};