patman: Convert camel case in checkpatch.py

[platform/kernel/u-boot.git] / scripts / config_whitelist.txt

diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 7b45d57..6b21e39 100644 (file)
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -21,7 +21,6 @@ CONFIG_AT91SAM9M10G45EK
 CONFIG_AT91_GPIO_PULLUP
 CONFIG_AT91_LED
 CONFIG_AT91_WANTS_COMMON_PHY
-CONFIG_ATAPI
 CONFIG_ATMEL_LCD
 CONFIG_ATMEL_LCD_BGR555
 CONFIG_ATMEL_LCD_RGB565
@@ -440,7 +439,6 @@ CONFIG_I2C_RTC_ADDR
 CONFIG_ICACHE
 CONFIG_ICS307_REFCLK_HZ
 CONFIG_IDE_PREINIT
-CONFIG_IDE_RESET
 CONFIG_IMX
 CONFIG_IMX6_PWM_PER_CLK
 CONFIG_IMX_HDMI
@@ -683,7 +681,6 @@ CONFIG_RAMDISK_ADDR
 CONFIG_RAMDISK_BOOT
 CONFIG_RD_LVL
 CONFIG_RED_LED
-CONFIG_REMAKE_ELF
 CONFIG_RESERVED_01_BASE
 CONFIG_RESERVED_02_BASE
 CONFIG_RESERVED_03_BASE
@@ -725,7 +722,6 @@ CONFIG_SAR_REG
 CONFIG_SATA1
 CONFIG_SATA2
 CONFIG_SCIF_A
-CONFIG_SCSI_AHCI_PLAT
 CONFIG_SCSI_DEV_LIST
 CONFIG_SC_TIMER_CLK
 CONFIG_SDCARD
@@ -844,13 +840,6 @@ CONFIG_SYS_AT91_MAIN_CLOCK
 CONFIG_SYS_AT91_PLLA
 CONFIG_SYS_AT91_PLLB
 CONFIG_SYS_AT91_SLOW_CLOCK
-CONFIG_SYS_ATA_ALT_OFFSET
-CONFIG_SYS_ATA_BASE_ADDR
-CONFIG_SYS_ATA_DATA_OFFSET
-CONFIG_SYS_ATA_IDE0_OFFSET
-CONFIG_SYS_ATA_IDE1_OFFSET
-CONFIG_SYS_ATA_REG_OFFSET
-CONFIG_SYS_ATA_STRIDE
 CONFIG_SYS_AUTOLOAD
 CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
 CONFIG_SYS_AUXCORE_BOOTDATA
@@ -1416,8 +1405,6 @@ CONFIG_SYS_I2C_RTC_ADDR
 CONFIG_SYS_I2C_TCA642X_ADDR
 CONFIG_SYS_I2C_TCA642X_BUS_NUM
 CONFIG_SYS_ICACHE_INV
-CONFIG_SYS_IDE_MAXBUS
-CONFIG_SYS_IDE_MAXDEVICE
 CONFIG_SYS_IFC_ADDR
 CONFIG_SYS_IFC_CCR
 CONFIG_SYS_INIT_DBCR
@@ -1800,7 +1787,6 @@ CONFIG_SYS_PIOC_PDR_VAL1
 CONFIG_SYS_PIOC_PPUDR_VAL
 CONFIG_SYS_PIOD_PDR_VAL1
 CONFIG_SYS_PIOD_PPUDR_VAL
-CONFIG_SYS_PIO_MODE
 CONFIG_SYS_PJPAR
 CONFIG_SYS_PL310_BASE
 CONFIG_SYS_PLLAR_VAL
@@ -1859,7 +1845,6 @@ CONFIG_SYS_SATA2
 CONFIG_SYS_SATA2_FLAGS
 CONFIG_SYS_SATA2_OFFSET
 CONFIG_SYS_SATA_FAT_BOOT_PARTITION
-CONFIG_SYS_SATA_MAX_DEVICE
 CONFIG_SYS_SBFHDR_DATA_OFFSET
 CONFIG_SYS_SBFHDR_SIZE
 CONFIG_SYS_SCCR_SATACM
@@ -1867,9 +1852,6 @@ CONFIG_SYS_SCCR_TSEC1CM
 CONFIG_SYS_SCCR_TSEC2CM
 CONFIG_SYS_SCCR_USBDRCM
 CONFIG_SYS_SCR
-CONFIG_SYS_SCSI_MAX_DEVICE
-CONFIG_SYS_SCSI_MAX_LUN
-CONFIG_SYS_SCSI_MAX_SCSI_ID
 CONFIG_SYS_SDRAM
 CONFIG_SYS_SDRAM_BASE
 CONFIG_SYS_SDRAM_BASE0