/**
* This function Initializes the OC Stack. Must be called prior to starting the stack.
*
+ * @param mode OCMode Host device is client, server, or client-server.
+ * @param serverFlags OCTransportFlags Default server transport flags.
+ * @param clientFlags OCTransportFlags Default client transport flags.
+ * @param transportType OCTransportAdapter value to initialize.
+ *
+ * @return ::OC_STACK_OK on success, some other value upon failure.
+ */
+OCStackResult OCInit2(OCMode mode, OCTransportFlags serverFlags, OCTransportFlags clientFlags,
+ OCTransportAdapter transportType);
+
+/**
+ * This function Initializes the OC Stack. Must be called prior to starting the stack.
+ *
* @param ipAddr IP Address of host device. Deprecated parameter.
* @param port Port of host device. Deprecated parameter.
* @param mode OCMode Host device is client, server, or client-server.
* This function discovers or Perform requests on a specified resource
* (specified by that Resource's respective URI).
*
+ * @deprecated: Use OCDoRequest instead which does not free given payload.
+ *
* @param handle To refer to the request sent out on behalf of
* calling this API. This handle can be used to cancel this operation
* via the OCCancel API.
* the consumer. A NULL handle is permitted in the event where the caller
* has no use for the return value.
* @param method To perform on the resource.
- * @param requestUri URI of the resource to interact with. (Address prefix is deprecated in
+ * @param requestUri URI of the resource to interact with. (Address prefix is deprecated in
* favor of destination.)
* @param destination Complete description of destination.
- * @param payload Encoded request payload.
+ * @param payload Encoded request payload,
+ OCDoResource will free given payload when return OC_STATUS_OK.
* @param connectivityType Modifier flags when destination is not given.
* @param qos Quality of service. Note that if this API is called on a uri with the
* well-known multicast IP address, the qos will be forced to ::OC_LOW_QOS
* since it is impractical to send other QOS levels on such addresses.
* @param cbData Asynchronous callback function that is invoked by the stack when
- * discovery or resource interaction is complete.
+ * discovery or resource interaction is received. The discovery could be
+ * related to filtered/scoped/particular resource. The callback is
+ * generated for each response received.
* @param options The address of an array containing the vendor specific header options
* to be sent with the request.
* @param numOptions Number of header options to be included.
* @return ::OC_STACK_OK on success, some other value upon failure.
*/
OCStackResult OCDoResource(OCDoHandle *handle,
- OCMethod method,
- const char *requestUri,
- const OCDevAddr *destination,
- OCPayload* payload,
- OCConnectivityType connectivityType,
- OCQualityOfService qos,
- OCCallbackData *cbData,
- OCHeaderOption *options,
- uint8_t numOptions);
+ OCMethod method,
+ const char *requestUri,
+ const OCDevAddr *destination,
+ OCPayload* payload,
+ OCConnectivityType connectivityType,
+ OCQualityOfService qos,
+ OCCallbackData *cbData,
+ OCHeaderOption *options,
+ uint8_t numOptions);
+
+/**
+ * This function discovers or Perform requests on a specified resource
+ * (specified by that Resource's respective URI).
+ *
+ * @param handle To refer to the request sent out on behalf of
+ * calling this API. This handle can be used to cancel this operation
+ * via the OCCancel API.
+ * @note: This reference is handled internally, and should not be free'd by
+ * the consumer. A NULL handle is permitted in the event where the caller
+ * has no use for the return value.
+ * @param method To perform on the resource.
+ * @param requestUri URI of the resource to interact with. (Address prefix is deprecated in
+ * favor of destination.)
+ * @param destination Complete description of destination.
+ * @param payload Encoded request payload.
+ OCDoRequest does not free given payload.
+ * @param connectivityType Modifier flags when destination is not given.
+ * @param qos Quality of service. Note that if this API is called on a uri with the
+ * well-known multicast IP address, the qos will be forced to ::OC_LOW_QOS
+ * since it is impractical to send other QOS levels on such addresses.
+ * @param cbData Asynchronous callback function that is invoked by the stack when
+ * discovery or resource interaction is received. The discovery could be
+ * related to filtered/scoped/particular resource. The callback is
+ * generated for each response received.
+ * @param options The address of an array containing the vendor specific header options
+ * to be sent with the request.
+ * @param numOptions Number of header options to be included.
+ *
+ * @note: Presence subscription amendments (i.e. adding additional resource type filters by calling
+ * this API again) require the use of the same base URI as the original request to successfully
+ * amend the presence filters.
+ *
+ * @return ::OC_STACK_OK on success, some other value upon failure.
+ */
+OCStackResult OCDoRequest(OCDoHandle *handle,
+ OCMethod method,
+ const char *requestUri,
+ const OCDevAddr *destination,
+ OCPayload* payload,
+ OCConnectivityType connectivityType,
+ OCQualityOfService qos,
+ OCCallbackData *cbData,
+ OCHeaderOption *options,
+ uint8_t numOptions);
+
/**
* This function cancels a request associated with a specific @ref OCDoResource invocation.
*
*
* @return ::OC_STACK_OK on success, some other value upon failure.
*/
-OCStackResult OCCancel(OCDoHandle handle, OCQualityOfService qos, OCHeaderOption * options,
- uint8_t numOptions);
+OCStackResult OCCancel(OCDoHandle handle,
+ OCQualityOfService qos,
+ OCHeaderOption * options,
+ uint8_t numOptions);
/**
* Register Persistent storage callback.
*/
OCStackResult OCStopPresence();
-#endif
+#endif // WITH_PRESENCE
/**
/**
* This function sets device information.
*
- * @param deviceInfo Structure passed by the server application containing the device information.
+ * Upon call to OCInit, the default Device Type (i.e. "rt") has already been set to the default
+ * Device Type "oic.wk.d". You do not have to specify "oic.wk.d" in the OCDeviceInfo.types linked
+ * list. The default Device Type is mandatory and always specified by this Device as the first
+ * Device Type.
+ *
+ * @param deviceInfo Structure passed by the server application containing the device
+ * information.
*
* @return
* ::OC_STACK_OK no errors.
void* callbackParam,
uint8_t resourceProperties);
-
/**
* This function adds a resource to a collection resource.
*
*
* @return ::OC_STACK_OK on success, some other value upon failure.
*/
-OCStackResult OCBindResourceHandler(OCResourceHandle handle, OCEntityHandler entityHandler,
- void *callbackParameter);
+OCStackResult OCBindResourceHandler(OCResourceHandle handle,
+ OCEntityHandler entityHandler,
+ void *callbackParameter);
/**
* This function gets the number of resources that have been created in the stack.
*/
OCStackResult
OCNotifyListOfObservers (OCResourceHandle handle,
- OCObservationId *obsIdList,
- uint8_t numberOfIds,
- const OCRepPayload *payload,
- OCQualityOfService qos);
+ OCObservationId *obsIdList,
+ uint8_t numberOfIds,
+ const OCRepPayload *payload,
+ OCQualityOfService qos);
/**
*/
OCStackResult OCDoResponse(OCEntityHandlerResponse *response);
+//#ifdef DIRECT_PAIRING
+/**
+ * The function is responsible for discovery of direct-pairing device is current subnet. It will list
+ * all the device in subnet which support direct-pairing.
+ * Caller must NOT free returned constant pointer
+ *
+ * @param[in] timeout Timeout in seconds, value till which function will listen to responses from
+ * client before returning the list of devices.
+ * @return OCDirectPairingDev_t pointer in case of success and NULL otherwise.
+ */
+const OCDPDev_t* OCDiscoverDirectPairingDevices(unsigned short waittime);
+
+/**
+ * The function is responsible for return of paired device list via direct-pairing. It will list
+ * all the device which is previousely paired with client.
+ * Caller must NOT free returned constant pointer
+ *
+ * @return OCDirectPairingDev_t pointer in case of success and NULL otherwise.
+ */
+const OCDPDev_t* OCGetDirectPairedDevices();
+
+/**
+ * The function is responsible for establishment of direct-pairing. It will proceed mode negotiation
+ * and connect PIN based dtls session.
+ *
+ * @param[in] peer Target device to establish direct-pairing.
+ * @param[in] pmSel Selected mode of pairing.
+ * @param[in] pinNumber PIN number for authentication, pin lenght is defined DP_PIN_LENGTH(8).
+ * @param[in] resultCallback Callback fucntion to event status of process.
+ * @return OTM_SUCCESS in case of success and other value otherwise.
+ */
+OCStackResult OCDoDirectPairing(void *ctx, OCDPDev_t* peer, OCPrm_t pmSel, char *pinNumber,
+ OCDirectPairingCB resultCallback);
+
+#ifdef WITH_CHPROXY
+/**
+ * This function sets uri being used for proxy.
+ *
+ * @param uri NULL terminated resource uri for CoAP-HTTP Proxy.
+ */
+OCStackResult OCSetProxyURI(const char *uri);
+#endif
+
+#if defined(RD_CLIENT) || defined(RD_SERVER)
+/**
+ * This function binds an resource unique id to the resource.
+ *
+ * @param handle Handle to the resource that the contained resource is to be bound.
+ * @param ins Unique ID for resource.
+ *
+ * @return ::OC_STACK_OK on success, some other value upon failure.
+ */
+OCStackResult OCBindResourceInsToResource(OCResourceHandle handle, int64_t ins);
+
+/**
+ * This function gets the resource unique id for a resource.
+ *
+ * @param handle Handle of resource.
+ * @param ins Unique ID for resource.
+ *
+ * @return Ins if resource found or 0 resource not found.
+ */
+OCStackResult OCGetResourceIns(OCResourceHandle handle, int64_t *ins);
+
+#endif
+
+/**
+* This function gets a resource handle by resource uri.
+*
+* @param uri Uri of Resource to get Resource handle.
+*
+* @return Found resource handle or NULL if not found.
+*/
+OCResourceHandle OCGetResourceHandleAtUri(const char *uri);
+
+
+#ifdef RD_SERVER
+/**
+* Search the RD database for queries.
+*
+* @param interfaceType is the interface type that is queried.
+* @param resourceType is the resource type that is queried.
+* @param discPayload is NULL if no resource found or else OCDiscoveryPayload with the details
+* about the resource.
+*
+* @return ::OC_STACK_OK in case of success or else other value.
+*/
+OCStackResult OCRDDatabaseCheckResources(const char *interfaceType, const char *resourceType,
+ OCDiscoveryPayload *discPayload);
+#endif
+//#endif // DIRECT_PAIRING
+
+/**
+ * Add a header option to the given header option array.
+ *
+ * @param ocHdrOpt Pointer to existing options.
+ * @param numOptions Number of existing options.
+ * @param optionID COAP option ID.
+ * @param optionData Option data value.
+ * @param optionDataLength Size of Option data value.
+ *
+ * @return ::OC_STACK_OK on success and other value otherwise.
+ */
+OCStackResult
+OCSetHeaderOption(OCHeaderOption* ocHdrOpt,
+ size_t* numOptions,
+ uint16_t optionID,
+ void* optionData,
+ size_t optionDataLength);
+
+/**
+ * Get data value of the option with specified option ID from given header option array.
+ *
+ * @param ocHdrOpt Pointer to existing options.
+ * @param numOptions Number of existing options.
+ * @param optionID COAP option ID.
+ * @param optionData Pointer to option data.
+ * @param optionDataLength Size of option data value.
+ * @param receivedDatalLength Pointer to the actual length of received data.
+ *
+ * @return ::OC_STACK_OK on success and other value otherwise.
+ */
+OCStackResult
+OCGetHeaderOption(OCHeaderOption* ocHdrOpt,
+ size_t numOptions,
+ uint16_t optionID,
+ void* optionData,
+ size_t optionDataLength,
+ uint16_t* receivedDatalLength);
+
+/**
+ * gets the deviceId of the client
+ *
+ * @param deviceId pointer.
+ * @return Returns ::OC_STACK_OK if success.
+ */
+OCStackResult OCGetDeviceId(OCUUIdentity *deviceId);
+
+/**
+ * sets the deviceId of the client
+ *
+ * @param deviceId pointer.
+ * @return Returns ::OC_STACK_OK if success.
+ */
+OCStackResult OCSetDeviceId(const OCUUIdentity *deviceId);
+
+ /**
+ * Gets the bool state of "isOwned" property on the doxm resource.
+ *
+ * @param isOwned a pointer to be assigned to isOwned property
+ * @return Returns ::OC_STACK_OK if success.
+ */
+OCStackResult OCGetDeviceOwnedState(bool *isOwned);
+
+/**
+ * Encode an address string to match RFC 6874.
+ *
+ * @param outputAddress a char array to be written with the encoded string.
+ *
+ * @param outputSize size of outputAddress buffer.
+ *
+ * @param inputAddress a char array of size <= CA_MAX_URI_LENGTH
+ * containing a valid IPv6 address string.
+ *
+ * @return ::OC_STACK_OK on success and other value otherwise.
+ */
+OCStackResult OCEncodeAddressForRFC6874(char* outputAddress,
+ size_t outputSize,
+ const char* inputAddress);
+
+/**
+ * Decode an address string according to RFC 6874.
+ *
+ * @param outputAddress a char array to be written with the decoded string.
+ *
+ * @param outputSize size of outputAddress buffer.
+ *
+ * @param inputAddress a valid percent-encoded address string.
+ *
+ * @param end NULL if the entire entire inputAddress is a null-terminated percent-
+ * encoded address string. Otherwise, a pointer to the first byte that
+ * is not part of the address string (e.g., ']' in a URI).
+ *
+ * @return ::OC_STACK_OK on success and other value otherwise.
+ */
+OCStackResult OCDecodeAddressForRFC6874(char* outputAddress,
+ size_t outputSize,
+ const char* inputAddress,
+ const char* end);
+
+/**
+ * Set the value of /oic/d and /oic/p properties. This function is a generic function that sets for
+ * all OCF defined properties.
+ *
+ * @param type the payload type for device and platform as defined in @ref OCPayloadType.
+ * @param propName the pre-defined property as per OCF spec.
+ * @param value the value of the property to be set.
+ *
+ * @return ::OC_STACK_OK on success and other value otherwise.
+ */
+OCStackResult OCSetPropertyValue(OCPayloadType type, const char *propName, const void *value);
+
+/**
+ * Get the value of /oic/d and /oic/p properties. This function is a generic function that get value
+ * for all OCF defined properties.
+ *
+ * @param type the payload type for device and platform as defined in @ref OCPayloadType.
+ * @param propName the pre-defined as per OCF spec.
+ * @param value this holds the return value. In case of error will be set to NULL.
+ *
+ * @return ::OC_STACK_OK on success and other value otherwise.
+ */
+OCStackResult OCGetPropertyValue(OCPayloadType type, const char *propName, void **value);
+
+/**
+* Delete client callback info all.
+*/
+void OCClearCallBackList();
+
+/**
+ * Delete observer info all.
+ */
+void OCClearObserverlist();
+
+/**
+ * API to encrypt the un-encrypted DB file before OCRegisterPersistentStorageHandler
+ * If the API is successful, un-encrypted file will be removed, and if the encrypted file
+ * is currupted, then it restores encrypted file using rescue file.
+ *
+ * @param[in] key key used for encryption
+ * @param[in] psPlain OCPersistentStorage for the plain DB
+ * @param[in] psEnc OCPersistentStorage for the encrypted DB
+ * @param[in] psRescue OCPersistentStorage for the rescue DB
+ *
+ * @return ::OC_STACK_OK on success and other value otherwise.
+ */
+OCStackResult OCSetSecurePSI(const unsigned char *key, const OCPersistentStorage *psPlain,
+ const OCPersistentStorage *psEnc, const OCPersistentStorage *psRescue);
+
+/**
+ * Generic Encryption function to encrypt data buffer in pt
+ * and update in ct and len in ct_len. (AES-CBC-HMAC)
+ *
+ * @param[in] pt plaintext to be encrypted
+ * @param[in] pt_len length of plaintext
+ * @param[out] ct ciphered text
+ * @param[out] ct_len is length of the ciphered text.
+ *
+ * @return ::0 for Success.
+ */
+int OCEncrypt(const unsigned char *pt, size_t pt_len,
+ unsigned char **ct, size_t *ct_len);
+
+/**
+ * Generic Decryption fucntion to decrypt data buffer in ct
+ * and update in pt and len in pt_len. (AES-CBC-HMAC)
+ *
+ * @param[in] ct ciphered to be decrypted
+ * @param[in] ct_len length of cipher text
+ * @param[out] pt plaintext text
+ * @param[out] pt_len is length of the palintext text.
+ *
+ * @return ::0 for Success.
+ */
+int OCDecrypt(const unsigned char *ct, size_t ct_len,
+ unsigned char **pt, size_t *pt_len);
+
+/**
+ * API to set key to psi
+ *
+ * @param[in] key key used for encryption
+ * @return ::OC_STACK_OK for Success, otherwise some error value.
+ */
+OCStackResult OCSetKey(const unsigned char* key);
+
+/**
+ * API to get key from psi
+ *
+ * @param[out] key key used for encryption
+ * @return ::OC_STACK_OK for Success, otherwise some error value.
+ */
+OCStackResult OCGetKey(unsigned char* key);
+
+/**
+ * API to register OTM event handler
+ *
+ * @param[in] ctx user context returned in the callback
+ * @param[in] cb callback function to receive the OTM event on server side
+ * @return ::OC_STACK_OK for Success, otherwise some error value.
+ */
+OCStackResult OCSetOtmEventHandler(void *ctx, OCOtmEventHandler cb);
+
#ifdef __cplusplus
}
#endif // __cplusplus