%% TeX macros to handle texinfo files
-% Copyright (C) 1985, 1986, 1988, 1990, 1991 Free Software Foundation, Inc.
+% Copyright (C) 1985, 86, 88, 90, 91, 92, 93,
+% 94, 95, 1996 Free Software Foundation, Inc.
%This texinfo.tex file is free software; you can redistribute it and/or
%modify it under the terms of the GNU General Public License as
%You should have received a copy of the GNU General Public License
%along with this texinfo.tex file; see the file COPYING. If not, write
-%to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
-%USA.
+%to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+%Boston, MA 02111-1307, USA.
%In other words, you are welcome to use, share and improve this program.
%You are forbidden to forbid anyone else to use, share and improve
%what you give them. Help stamp out software-hoarding!
-\def\texinfoversion{2.46}
+
+% Send bug reports to bug-texinfo@prep.ai.mit.edu.
+% Please include a *precise* test case in each bug report.
+
+
+% Make it possible to create a .fmt file just by loading this file:
+% if the underlying format is not loaded, start by loading it now.
+% Added by gildea November 1993.
+\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
+
+% This automatically updates the version number based on RCS.
+\def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}}
+\deftexinfoversion$Revision$
\message{Loading texinfo package [Version \texinfoversion]:}
-\message{}
-% Print the version number if in a .fmt file.
-\everyjob{\message{[Texinfo version \texinfoversion]}\message{}}
+% If in a .fmt file, print the version number
+% and turn on active characters that we couldn't do earlier because
+% they might have appeared in the input file name.
+\everyjob{\message{[Texinfo version \texinfoversion]}\message{}
+ \catcode`+=\active \catcode`\_=\active}
% Save some parts of plain tex whose names we will redefine.
-\let\ptexlbrace=\{
-\let\ptexrbrace=\}
-\let\ptexdots=\dots
-\let\ptexdot=\.
-\let\ptexstar=\*
-\let\ptexend=\end
-\let\ptexbullet=\bullet
\let\ptexb=\b
+\let\ptexbullet=\bullet
\let\ptexc=\c
+\let\ptexcomma=\,
+\let\ptexdot=\.
+\let\ptexdots=\dots
+\let\ptexend=\end
+\let\ptexequiv = \equiv
\let\ptexi=\i
+\let\ptexlbrace=\{
+\let\ptexrbrace=\}
+\let\ptexstar=\*
\let\ptext=\t
-\let\ptexl=\l
-\let\ptexL=\L
+\let\ptextilde=\~
+
+% Be sure we're in horizontal mode when doing a tie, since we make space
+% equivalent to this in @example-like environments. Otherwise, a space
+% at the beginning of a line will start with \penalty -- and
+% since \penalty is valid in vertical mode, we'd end up putting the
+% penalty on the vertical list instead of in the new paragraph.
+{\catcode`@ = 11
+ % Avoid using \@M directly, because that causes trouble
+ % if the definition is written into an index file.
+ \global\let\tiepenalty = \@M
+ \gdef\tie{\leavevmode\penalty\tiepenalty\ }
+}
+\let\~ = \tie % And make it available as @~.
-\def\tie{\penalty 10000\ } % Save plain tex definition of ~.
\message{Basics,}
\chardef\other=12
+% If this character appears in an error message or help string, it
+% starts a new line in the output.
+\newlinechar = `^^J
+
+% Set up fixed words for English.
+\ifx\putwordChapter\undefined{\gdef\putwordChapter{Chapter}}\fi%
+\def\putwordInfo{Info}%
+\ifx\putwordSee\undefined{\gdef\putwordSee{See}}\fi%
+\ifx\putwordsee\undefined{\gdef\putwordsee{see}}\fi%
+\ifx\putwordfile\undefined{\gdef\putwordfile{file}}\fi%
+\ifx\putwordpage\undefined{\gdef\putwordpage{page}}\fi%
+\ifx\putwordsection\undefined{\gdef\putwordsection{section}}\fi%
+\ifx\putwordSection\undefined{\gdef\putwordSection{Section}}\fi%
+\ifx\putwordTableofContents\undefined{\gdef\putwordTableofContents{Table of Contents}}\fi%
+\ifx\putwordShortContents\undefined{\gdef\putwordShortContents{Short Contents}}\fi%
+\ifx\putwordAppendix\undefined{\gdef\putwordAppendix{Appendix}}\fi%
+
+% Ignore a token.
+%
+\def\gobble#1{}
+
\hyphenation{ap-pen-dix}
\hyphenation{mini-buf-fer mini-buf-fers}
\hyphenation{eshell}
% Margin to add to right of even pages, to left of odd pages.
-\newdimen \bindingoffset \bindingoffset=0pt
-\newdimen \normaloffset \normaloffset=\hoffset
+\newdimen \bindingoffset
+\newdimen \normaloffset
\newdimen\pagewidth \newdimen\pageheight
-\pagewidth=\hsize \pageheight=\vsize
+
+% Sometimes it is convenient to have everything in the transcript file
+% and nothing on the terminal. We don't just call \tracingall here,
+% since that produces some useless output on the terminal.
+%
+\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
+\def\loggingall{\tracingcommands2 \tracingstats2
+ \tracingpages1 \tracingoutput1 \tracinglostchars1
+ \tracingmacros2 \tracingparagraphs1 \tracingrestores1
+ \showboxbreadth\maxdimen\showboxdepth\maxdimen
+}%
%---------------------Begin change-----------------------
%
+%%%% For @cropmarks command.
% Dimensions to add cropmarks at corners Added by P. A. MacKay, 12 Nov. 1986
%
\newdimen\cornerlong \newdimen\cornerthick
\newdimen \topandbottommargin
\newdimen \outerhsize \newdimen \outervsize
-\cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks
+\cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks
\outerhsize=7in
-\outervsize=9.5in
+%\outervsize=9.5in
+% Alternative @smallbook page size is 9.25in
+\outervsize=9.25in
\topandbottommargin=.75in
%
%---------------------End change-----------------------
% \onepageout takes a vbox as an argument. Note that \pagecontents
-% does insertions itself, but you have to call it yourself.
+% does insertions, but you have to call it yourself.
\chardef\PAGE=255 \output={\onepageout{\pagecontents\PAGE}}
-\def\onepageout#1{\hoffset=\normaloffset
-\ifodd\pageno \advance\hoffset by \bindingoffset
-\else \advance\hoffset by -\bindingoffset\fi
-{\escapechar=`\\\relax % makes sure backslash is used in output files.
-\shipout\vbox{{\let\hsize=\pagewidth \makeheadline} \pagebody{#1}%
-{\let\hsize=\pagewidth \makefootline}}}%
-\advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi}
+\def\onepageout#1{%
+ \hoffset=\normaloffset
+ \ifodd\pageno \advance\hoffset by \bindingoffset
+ \else \advance\hoffset by -\bindingoffset\fi
+ {%
+ \escapechar = `\\ % use backslash in output files.
+ \indexdummies
+ \shipout\vbox{%
+ {\let\hsize=\pagewidth \makeheadline}%
+ \pagebody{#1}%
+ {\let\hsize=\pagewidth \makefootline}%
+ }%
+ }%
+ \advancepageno
+ \ifnum\outputpenalty>-20000 \else\dosupereject\fi
+}
+%%%% For @cropmarks command %%%%
% Here is a modification of the main output routine for Near East Publications
% This provides right-angle cropmarks at all four corners.
% site of the centerlined box. (P. A. MacKay, 12 November, 1986)
%
\def\croppageout#1{\hoffset=0pt % make sure this doesn't mess things up
- \shipout
- \vbox to \outervsize{\hsize=\outerhsize
+{\escapechar=`\\\relax % makes sure backslash is used in output files.
+ \shipout
+ \vbox to \outervsize{\hsize=\outerhsize
\vbox{\line{\ewtop\hfill\ewtop}}
\nointerlineskip
\line{\vbox{\moveleft\cornerthick\nstop}
\vbox{\moveright\cornerthick\nstop}}
\vskip \topandbottommargin
\centerline{\ifodd\pageno\hskip\bindingoffset\fi
- \vbox{
- {\let\hsize=\pagewidth \makeheadline}
- \pagebody{#1}
- {\let\hsize=\pagewidth \makefootline}}
- \ifodd\pageno\else\hskip\bindingoffset\fi}
- \vskip \topandbottommargin plus1fill minus1fill
+ \vbox{
+ {\let\hsize=\pagewidth \makeheadline}
+ \pagebody{#1}
+ {\let\hsize=\pagewidth \makefootline}}
+ \ifodd\pageno\else\hskip\bindingoffset\fi}
+ \vskip \topandbottommargin plus1fill minus1fill
\boxmaxdepth\cornerthick
\line{\vbox{\moveleft\cornerthick\nsbot}
\hfill
\vbox{\moveright\cornerthick\nsbot}}
\nointerlineskip
\vbox{\line{\ewbot\hfill\ewbot}}
- }
- \advancepageno
+ }}
+ \advancepageno
\ifnum\outputpenalty>-20000 \else\dosupereject\fi}
%
% Do @cropmarks to get crop marks
\def\cropmarks{\let\onepageout=\croppageout }
+\newinsert\margin \dimen\margin=\maxdimen
+
\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
{\catcode`\@ =11
\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
+% marginal hacks, juha@viisa.uucp (Juha Takala)
+\ifvoid\margin\else % marginal info is present
+ \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
\dimen@=\dp#1 \unvbox#1
\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
\def\nsbot{\vbox
{\hrule height\cornerlong depth\cornerthick width\cornerthick}}
-% Parse an argument, then pass it to #1.
-% The argument can be delimited with [...] or with "..." or braces
-% or it can be a whole line.
-% #1 should be a macro which expects
-% an ordinary undelimited TeX argument.
-
-\def\parsearg #1{\let\next=#1\begingroup\obeylines\futurelet\temp\parseargx}
+% Parse an argument, then pass it to #1. The argument is the rest of
+% the input line (except we remove a trailing comment). #1 should be a
+% macro which expects an ordinary undelimited TeX argument.
+%
+\def\parsearg#1{%
+ \let\next = #1%
+ \begingroup
+ \obeylines
+ \futurelet\temp\parseargx
+}
+% If the next token is an obeyed space (from an @example environment or
+% the like), remove it and recurse. Otherwise, we're done.
\def\parseargx{%
-\ifx \obeyedspace\temp \aftergroup\parseargdiscardspace \else%
-\aftergroup \parseargline %
-\fi \endgroup}
+ % \obeyedspace is defined far below, after the definition of \sepspaces.
+ \ifx\obeyedspace\temp
+ \expandafter\parseargdiscardspace
+ \else
+ \expandafter\parseargline
+ \fi
+}
+% Remove a single space (as the delimiter token to the macro call).
{\obeyspaces %
-\gdef\parseargdiscardspace {\begingroup\obeylines\futurelet\temp\parseargx}}
+ \gdef\parseargdiscardspace {\futurelet\temp\parseargx}}
-\gdef\obeyedspace{\ }
-
-\def\parseargline{\begingroup \obeylines \parsearglinex}
{\obeylines %
-\gdef\parsearglinex #1^^M{\endgroup \next {#1}}}
+ \gdef\parseargline#1^^M{%
+ \endgroup % End of the group started in \parsearg.
+ %
+ % First remove any @c comment, then any @comment.
+ % Result of each macro is put in \toks0.
+ \argremovec #1\c\relax %
+ \expandafter\argremovecomment \the\toks0 \comment\relax %
+ %
+ % Call the caller's macro, saved as \next in \parsearg.
+ \expandafter\next\expandafter{\the\toks0}%
+ }%
+}
+
+% Since all \c{,omment} does is throw away the argument, we can let TeX
+% do that for us. The \relax here is matched by the \relax in the call
+% in \parseargline; it could be more or less anything, its purpose is
+% just to delimit the argument to the \c.
+\def\argremovec#1\c#2\relax{\toks0 = {#1}}
+\def\argremovecomment#1\comment#2\relax{\toks0 = {#1}}
+
+% \argremovec{,omment} might leave us with trailing spaces, though; e.g.,
+% @end itemize @c foo
+% will have two active spaces as part of the argument with the
+% `itemize'. Here we remove all active spaces from #1, and assign the
+% result to \toks0.
+%
+% This loses if there are any *other* active characters besides spaces
+% in the argument -- _ ^ +, for example -- since they get expanded.
+% Fortunately, Texinfo does not define any such commands. (If it ever
+% does, the catcode of the characters in questionwill have to be changed
+% here.) But this means we cannot call \removeactivespaces as part of
+% \argremovec{,omment}, since @c uses \parsearg, and thus the argument
+% that \parsearg gets might well have any character at all in it.
+%
+\def\removeactivespaces#1{%
+ \begingroup
+ \ignoreactivespaces
+ \edef\temp{#1}%
+ \global\toks0 = \expandafter{\temp}%
+ \endgroup
+}
+
+% Change the active space to expand to nothing.
+%
+\begingroup
+ \obeyspaces
+ \gdef\ignoreactivespaces{\obeyspaces\let =\empty}
+\endgroup
+
\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
\endgroup\fi} % This is not perfect, but it should reduce lossage
% @begin foo is the same as @foo, for now.
-\newhelp\EMsimple{Type <Return> to continue}
+\newhelp\EMsimple{Type <Return> to continue.}
\outer\def\begin{\parsearg\beginxxx}
{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else
\csname #1\endcsname\fi}
-%% @end foo executes the definition of \Efoo.
-%% foo can be delimited by doublequotes or brackets.
-
+% @end foo executes the definition of \Efoo.
+%
\def\end{\parsearg\endxxx}
-
\def\endxxx #1{%
-\expandafter\ifx\csname E#1\endcsname\relax
-\expandafter\ifx\csname #1\endcsname\relax
-\errmessage{Undefined command @end #1}\else
-\errorE{#1}\fi\fi
-\csname E#1\endcsname}
-\def\errorE#1{
-{\errhelp=\EMsimple \errmessage{@end #1 not within #1 environment}}}
+ \removeactivespaces{#1}%
+ \edef\endthing{\the\toks0}%
+ %
+ \expandafter\ifx\csname E\endthing\endcsname\relax
+ \expandafter\ifx\csname \endthing\endcsname\relax
+ % There's no \foo, i.e., no ``environment'' foo.
+ \errhelp = \EMsimple
+ \errmessage{Undefined command `@end \endthing'}%
+ \else
+ \unmatchedenderror\endthing
+ \fi
+ \else
+ % Everything's ok; the right environment has been started.
+ \csname E\endthing\endcsname
+ \fi
+}
-% Single-spacing is done by various environments.
+% There is an environment #1, but it hasn't been started. Give an error.
+%
+\def\unmatchedenderror#1{%
+ \errhelp = \EMsimple
+ \errmessage{This `@end #1' doesn't have a matching `@#1'}%
+}
+
+% Define the control sequence \E#1 to give an unmatched @end error.
+%
+\def\defineunmatchedend#1{%
+ \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}%
+}
-\newskip\singlespaceskip \singlespaceskip = \baselineskip
+
+% Single-spacing is done by various environments (specifically, in
+% \nonfillstart and \quotations).
+\newskip\singlespaceskip \singlespaceskip = 12.5pt
\def\singlespace{%
-{\advance \baselineskip by -\singlespaceskip
-\kern \baselineskip}%
-\baselineskip=\singlespaceskip
+ % Why was this kern here? It messes up equalizing space above and below
+ % environments. --karl, 6may93
+ %{\advance \baselineskip by -\singlespaceskip
+ %\kern \baselineskip}%
+ \setleading \singlespaceskip
}
%% Simple single-character @ commands
% Kludge this until the fonts are right (grr).
\def\@{{\tt \char '100}}
-% Define @` and @' to be the same as ` and '
-% but suppressing ligatures.
-\def\`{{`}}
-\def\'{{'}}
+% This is turned off because it was never documented
+% and you can use @w{...} around a quote to suppress ligatures.
+%% Define @` and @' to be the same as ` and '
+%% but suppressing ligatures.
+%\def\`{{`}}
+%\def\'{{'}}
% Used to generate quoted braces.
-
\def\mylbrace {{\tt \char '173}}
\def\myrbrace {{\tt \char '175}}
\let\{=\mylbrace
\let\}=\myrbrace
+\begingroup
+ % Definitions to produce actual \{ & \} command in an index.
+ \catcode`\{ = 12 \catcode`\} = 12
+ \catcode`\[ = 1 \catcode`\] = 2
+ \catcode`\@ = 0 \catcode`\\ = 12
+ @gdef@lbracecmd[\{]%
+ @gdef@rbracecmd[\}]%
+@endgroup
+
+% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
+% Others are defined by plain TeX: @` @' @" @^ @~ @= @v @H.
+\let\, = \c
+\let\dotaccent = \.
+\def\ringaccent#1{{\accent23 #1}}
+\let\tieaccent = \t
+\let\ubaraccent = \b
+\let\udotaccent = \d
+
+% Other special characters: @questiondown @exclamdown
+% Plain TeX defines: @AA @AE @O @OE @L (and lowercase versions) @ss.
+\def\questiondown{?`}
+\def\exclamdown{!`}
+
+% Dotless i and dotless j, used for accents.
+\def\imacro{i}
+\def\jmacro{j}
+\def\dotless#1{%
+ \def\temp{#1}%
+ \ifx\temp\imacro \ptexi
+ \else\ifx\temp\jmacro \j
+ \else \errmessage{@dotless can be used only with i or j}%
+ \fi\fi
+}
% @: forces normal size whitespace following.
\def\:{\spacefactor=1000 }
% @. is an end-of-sentence period.
\def\.{.\spacefactor=3000 }
-% @w prevents a word break
-\def\w #1{\hbox{#1}}
+% @enddots{} is an end-of-sentence ellipsis.
+\gdef\enddots{$\mathinner{\ldotp\ldotp\ldotp\ldotp}$\spacefactor=3000}
-% @group ... @end group forces ... to be all on one page.
+% @! is an end-of-sentence bang.
+\gdef\!{!\spacefactor=3000 }
-\def\group{\begingroup% \inENV ???
-\def \Egroup{\egroup\endgroup}
-\vbox\bgroup}
+% @? is an end-of-sentence query.
+\gdef\?{?\spacefactor=3000 }
+
+% @w prevents a word break. Without the \leavevmode, @w at the
+% beginning of a paragraph, when TeX is still in vertical mode, would
+% produce a whole line of output instead of starting the paragraph.
+\def\w#1{\leavevmode\hbox{#1}}
+
+% @group ... @end group forces ... to be all on one page, by enclosing
+% it in a TeX vbox. We use \vtop instead of \vbox to construct the box
+% to keep its height that of a normal line. According to the rules for
+% \topskip (p.114 of the TeXbook), the glue inserted is
+% max (\topskip - \ht (first item), 0). If that height is large,
+% therefore, no glue is inserted, and the space between the headline and
+% the text is small, which looks bad.
+%
+\def\group{\begingroup
+ \ifnum\catcode13=\active \else
+ \errhelp = \groupinvalidhelp
+ \errmessage{@group invalid in context where filling is enabled}%
+ \fi
+ %
+ % The \vtop we start below produces a box with normal height and large
+ % depth; thus, TeX puts \baselineskip glue before it, and (when the
+ % next line of text is done) \lineskip glue after it. (See p.82 of
+ % the TeXbook.) Thus, space below is not quite equal to space
+ % above. But it's pretty close.
+ \def\Egroup{%
+ \egroup % End the \vtop.
+ \endgroup % End the \group.
+ }%
+ %
+ \vtop\bgroup
+ % We have to put a strut on the last line in case the @group is in
+ % the midst of an example, rather than completely enclosing it.
+ % Otherwise, the interline space between the last line of the group
+ % and the first line afterwards is too small. But we can't put the
+ % strut in \Egroup, since there it would be on a line by itself.
+ % Hence this just inserts a strut at the beginning of each line.
+ \everypar = {\strut}%
+ %
+ % Since we have a strut on every line, we don't need any of TeX's
+ % normal interline spacing.
+ \offinterlineskip
+ %
+ % OK, but now we have to do something about blank
+ % lines in the input in @example-like environments, which normally
+ % just turn into \lisppar, which will insert no space now that we've
+ % turned off the interline space. Simplest is to make them be an
+ % empty paragraph.
+ \ifx\par\lisppar
+ \edef\par{\leavevmode \par}%
+ %
+ % Reset ^^M's definition to new definition of \par.
+ \obeylines
+ \fi
+ %
+ % Do @comment since we are called inside an environment such as
+ % @example, where each end-of-line in the input causes an
+ % end-of-line in the output. We don't want the end-of-line after
+ % the `@group' to put extra space in the output. Since @group
+ % should appear on a line by itself (according to the Texinfo
+ % manual), we don't worry about eating any user text.
+ \comment
+}
+%
+% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
+% message, so this ends up printing `@group can only ...'.
+%
+\newhelp\groupinvalidhelp{%
+group can only be used in environments such as @example,^^J%
+where each line of input produces a line of output.}
% @need space-in-mils
% forces a page break if there is not space-in-mils remaining.
\def\need{\parsearg\needx}
-\def\needx #1{\par %
-% This method tries to make TeX break the page naturally
-% if the depth of the box does not fit.
-{\baselineskip=0pt%
-\vtop to #1\mil{\vfil}\kern -#1\mil\penalty 10000
-\prevdepth=-1000pt
-}}
+% Old definition--didn't work.
+%\def\needx #1{\par %
+%% This method tries to make TeX break the page naturally
+%% if the depth of the box does not fit.
+%{\baselineskip=0pt%
+%\vtop to #1\mil{\vfil}\kern -#1\mil\penalty 10000
+%\prevdepth=-1000pt
+%}}
+
+\def\needx#1{%
+ % Go into vertical mode, so we don't make a big box in the middle of a
+ % paragraph.
+ \par
+ %
+ % Don't add any leading before our big empty box, but allow a page
+ % break, since the best break might be right here.
+ \allowbreak
+ \nointerlineskip
+ \vtop to #1\mil{\vfil}%
+ %
+ % TeX does not even consider page breaks if a penalty added to the
+ % main vertical list is 10000 or more. But in order to see if the
+ % empty box we just added fits on the page, we must make it consider
+ % page breaks. On the other hand, we don't want to actually break the
+ % page after the empty box. So we use a penalty of 9999.
+ %
+ % There is an extremely small chance that TeX will actually break the
+ % page at this \penalty, if there are no other feasible breakpoints in
+ % sight. (If the user is using lots of big @group commands, which
+ % almost-but-not-quite fill up a page, TeX will have a hard time doing
+ % good page breaking, for example.) However, I could not construct an
+ % example where a page broke at this \penalty; if it happens in a real
+ % document, then we can reconsider our strategy.
+ \penalty9999
+ %
+ % Back up by the size of the box, whether we did a page break or not.
+ \kern -#1\mil
+ %
+ % Do not allow a page break right after this kern.
+ \nobreak
+}
% @br forces paragraph break
% @exdent text....
% outputs text on separate line in roman font, starting at standard page margin
-\def\exdent{\errmessage{@exdent in filled text}}
- % @lisp, etc, define \exdent locally from \internalexdent
+% This records the amount of indent in the innermost environment.
+% That's how much \exdent should take out.
+\newskip\exdentamount
-{\obeyspaces
-\gdef\internalexdent{\parsearg\exdentzzz}}
+% This defn is used inside fill environments such as @defun.
+\def\exdent{\parsearg\exdentyyy}
+\def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}}
-\def\exdentzzz #1{{\advance \leftskip by -\lispnarrowing
-\advance \hsize by -\leftskip
-\advance \hsize by -\rightskip
-\leftline{{\rm#1}}}}
+% This defn is used inside nofill environments such as @example.
+\def\nofillexdent{\parsearg\nofillexdentyyy}
+\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount
+\leftline{\hskip\leftskip{\rm#1}}}}
-% @include file insert text of that file as input.
+% @inmargin{TEXT} puts TEXT in the margin next to the current paragraph.
-\def\include{\parsearg\includezzz}
-\def\includezzz #1{{\def\thisfile{#1}\input #1
-}}
+\def\inmargin#1{%
+\strut\vadjust{\nobreak\kern-\strutdepth
+ \vtop to \strutdepth{\baselineskip\strutdepth\vss
+ \llap{\rightskip=\inmarginspacing \vbox{\noindent #1}}\null}}}
+\newskip\inmarginspacing \inmarginspacing=1cm
+\def\strutdepth{\dp\strutbox}
+
+%\hbox{{\rm#1}}\hfil\break}}
+
+% @include file insert text of that file as input.
+% Allow normal characters that we make active in the argument (a file name).
+\def\include{\begingroup
+ \catcode`\\=12
+ \catcode`~=12
+ \catcode`^=12
+ \catcode`_=12
+ \catcode`|=12
+ \catcode`<=12
+ \catcode`>=12
+ \catcode`+=12
+ \parsearg\includezzz}
+% Restore active chars for included file.
+\def\includezzz#1{\endgroup\begingroup
+ % Read the included file in a group so nested @include's work.
+ \def\thisfile{#1}%
+ \input\thisfile
+\endgroup}
\def\thisfile{}
% @sp n outputs n lines of vertical space
\def\sp{\parsearg\spxxx}
-\def\spxxx #1{\par \vskip #1\baselineskip}
+\def\spxxx #1{\vskip #1\baselineskip}
% @comment ...line which is ignored...
% @c is the same as @comment
\let\c=\comment
+% @paragraphindent is defined for the Info formatting commands only.
+\let\paragraphindent=\comment
+
% Prevent errors for section commands.
% Used in @ignore and in failing conditionals.
\def\ignoresections{%
\let\titlepage=\relax
}
-\def\ignore{\begingroup\ignoresections
-% Make sure that spaces turn into tokens that match what \ignorexxx wants.
-\catcode32=10
-\ignorexxx}
-\long\def\ignorexxx #1\end ignore{\endgroup\ignorespaces}
+% Used in nested conditionals, where we have to parse the Texinfo source
+% and so want to turn off most commands, in case they are used
+% incorrectly.
+%
+\def\ignoremorecommands{%
+ \let\defcodeindex = \relax
+ \let\defcv = \relax
+ \let\deffn = \relax
+ \let\deffnx = \relax
+ \let\defindex = \relax
+ \let\defivar = \relax
+ \let\defmac = \relax
+ \let\defmethod = \relax
+ \let\defop = \relax
+ \let\defopt = \relax
+ \let\defspec = \relax
+ \let\deftp = \relax
+ \let\deftypefn = \relax
+ \let\deftypefun = \relax
+ \let\deftypevar = \relax
+ \let\deftypevr = \relax
+ \let\defun = \relax
+ \let\defvar = \relax
+ \let\defvr = \relax
+ \let\ref = \relax
+ \let\xref = \relax
+ \let\printindex = \relax
+ \let\pxref = \relax
+ \let\settitle = \relax
+ \let\setchapternewpage = \relax
+ \let\setchapterstyle = \relax
+ \let\everyheading = \relax
+ \let\evenheading = \relax
+ \let\oddheading = \relax
+ \let\everyfooting = \relax
+ \let\evenfooting = \relax
+ \let\oddfooting = \relax
+ \let\headings = \relax
+ \let\include = \relax
+ \let\lowersections = \relax
+ \let\down = \relax
+ \let\raisesections = \relax
+ \let\up = \relax
+ \let\set = \relax
+ \let\clear = \relax
+ \let\item = \relax
+}
-\def\direntry{\begingroup\direntryxxx}
-\long\def\direntryxxx #1\end direntry{\endgroup\ignorespaces}
+% Ignore @ignore ... @end ignore.
+%
+\def\ignore{\doignore{ignore}}
-% Conditionals to test whether a flag is set.
+% Also ignore @ifinfo, @ifhtml, @html, @menu, and @direntry text.
+%
+\def\ifinfo{\doignore{ifinfo}}
+\def\ifhtml{\doignore{ifhtml}}
+\def\html{\doignore{html}}
+\def\menu{\doignore{menu}}
+\def\direntry{\doignore{direntry}}
-\outer\def\ifset{\begingroup\ignoresections\parsearg\ifsetxxx}
+% Also ignore @macro ... @end macro. The user must run texi2dvi,
+% which runs makeinfo to do macro expansion. Ignore @unmacro, too.
+\def\macro{\doignore{macro}}
+\let\unmacro = \comment
-\def\ifsetxxx #1{\endgroup
-\expandafter\ifx\csname IF#1\endcsname\relax \let\temp=\ifsetfail
-\else \let\temp=\relax \fi
-\temp}
-\def\Eifset{}
-\def\ifsetfail{\begingroup\ignoresections\ifsetfailxxx}
-\long\def\ifsetfailxxx #1\end ifset{\endgroup\ignorespaces}
-\outer\def\ifclear{\begingroup\ignoresections\parsearg\ifclearxxx}
+% @dircategory CATEGORY -- specify a category of the dir file
+% which this file should belong to. Ignore this in TeX.
+\let\dircategory = \comment
-\def\ifclearxxx #1{\endgroup
-\expandafter\ifx\csname IF#1\endcsname\relax \let\temp=\relax
-\else \let\temp=\ifclearfail \fi
-\temp}
-\def\Eifclear{}
-\def\ifclearfail{\begingroup\ignoresections\ifclearfailxxx}
-\long\def\ifclearfailxxx #1\end ifclear{\endgroup\ignorespaces}
+% Ignore text until a line `@end #1'.
+%
+\def\doignore#1{\begingroup
+ % Don't complain about control sequences we have declared \outer.
+ \ignoresections
+ %
+ % Define a command to swallow text until we reach `@end #1'.
+ \long\def\doignoretext##1\end #1{\enddoignore}%
+ %
+ % Make sure that spaces turn into tokens that match what \doignoretext wants.
+ \catcode32 = 10
+ %
+ % And now expand that command.
+ \doignoretext
+}
-% Some texinfo constructs that are trivial in tex
+% What we do to finish off ignored text.
+%
+\def\enddoignore{\endgroup\ignorespaces}%
+
+\newif\ifwarnedobs\warnedobsfalse
+\def\obstexwarn{%
+ \ifwarnedobs\relax\else
+ % We need to warn folks that they may have trouble with TeX 3.0.
+ % This uses \immediate\write16 rather than \message to get newlines.
+ \immediate\write16{}
+ \immediate\write16{***WARNING*** for users of Unix TeX 3.0!}
+ \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
+ \immediate\write16{If you are running another version of TeX, relax.}
+ \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
+ \immediate\write16{ Then upgrade your TeX installation if you can.}
+ \immediate\write16{ (See ftp://ftp.gnu.ai.mit.edu/pub/gnu/TeX.README.)}
+ \immediate\write16{If you are stuck with version 3.0, run the}
+ \immediate\write16{ script ``tex3patch'' from the Texinfo distribution}
+ \immediate\write16{ to use a workaround.}
+ \immediate\write16{}
+ \global\warnedobstrue
+ \fi
+}
+
+% **In TeX 3.0, setting text in \nullfont hangs tex. For a
+% workaround (which requires the file ``dummy.tfm'' to be installed),
+% uncomment the following line:
+%%%%%\font\nullfont=dummy\let\obstexwarn=\relax
+
+% Ignore text, except that we keep track of conditional commands for
+% purposes of nesting, up to an `@end #1' command.
+%
+\def\nestedignore#1{%
+ \obstexwarn
+ % We must actually expand the ignored text to look for the @end
+ % command, so that nested ignore constructs work. Thus, we put the
+ % text into a \vbox and then do nothing with the result. To minimize
+ % the change of memory overflow, we follow the approach outlined on
+ % page 401 of the TeXbook: make the current font be a dummy font.
+ %
+ \setbox0 = \vbox\bgroup
+ % Don't complain about control sequences we have declared \outer.
+ \ignoresections
+ %
+ % Define `@end #1' to end the box, which will in turn undefine the
+ % @end command again.
+ \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
+ %
+ % We are going to be parsing Texinfo commands. Most cause no
+ % trouble when they are used incorrectly, but some commands do
+ % complicated argument parsing or otherwise get confused, so we
+ % undefine them.
+ %
+ % We can't do anything about stray @-signs, unfortunately;
+ % they'll produce `undefined control sequence' errors.
+ \ignoremorecommands
+ %
+ % Set the current font to be \nullfont, a TeX primitive, and define
+ % all the font commands to also use \nullfont. We don't use
+ % dummy.tfm, as suggested in the TeXbook, because not all sites
+ % might have that installed. Therefore, math mode will still
+ % produce output, but that should be an extremely small amount of
+ % stuff compared to the main input.
+ %
+ \nullfont
+ \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont
+ \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont
+ \let\tensf = \nullfont
+ % Similarly for index fonts (mostly for their use in
+ % smallexample)
+ \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont
+ \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont
+ \let\indsf = \nullfont
+ %
+ % Don't complain when characters are missing from the fonts.
+ \tracinglostchars = 0
+ %
+ % Don't bother to do space factor calculations.
+ \frenchspacing
+ %
+ % Don't report underfull hboxes.
+ \hbadness = 10000
+ %
+ % Do minimal line-breaking.
+ \pretolerance = 10000
+ %
+ % Do not execute instructions in @tex
+ \def\tex{\doignore{tex}}
+}
+
+% @set VAR sets the variable VAR to an empty value.
+% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
+%
+% Since we want to separate VAR from REST-OF-LINE (which might be
+% empty), we can't just use \parsearg; we have to insert a space of our
+% own to delimit the rest of the line, and then take it out again if we
+% didn't need it. Make sure the catcode of space is correct to avoid
+% losing inside @example, for instance.
+%
+\def\set{\begingroup\catcode` =10 \parsearg\setxxx}
+\def\setxxx#1{\setyyy#1 \endsetyyy}
+\def\setyyy#1 #2\endsetyyy{%
+ \def\temp{#2}%
+ \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
+ \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
+ \fi
+ \endgroup
+}
+% Can't use \xdef to pre-expand #2 and save some time, since \temp or
+% \next or other control sequences that we've defined might get us into
+% an infinite loop. Consider `@set foo @cite{bar}'.
+\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
+
+% @clear VAR clears (i.e., unsets) the variable VAR.
+%
+\def\clear{\parsearg\clearxxx}
+\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
+
+% @value{foo} gets the text saved in variable foo.
+%
+\def\value#1{\expandafter
+ \ifx\csname SET#1\endcsname\relax
+ {\{No value for ``#1''\}}
+ \else \csname SET#1\endcsname \fi}
-\def\iftex{}
-\def\Eiftex{}
-\def\ifinfo{\begingroup\ignoresections\ifinfoxxx}
-\long\def\ifinfoxxx #1\end ifinfo{\endgroup\ignorespaces}
+% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
+% with @set.
+%
+\def\ifset{\parsearg\ifsetxxx}
+\def\ifsetxxx #1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ \expandafter\ifsetfail
+ \else
+ \expandafter\ifsetsucceed
+ \fi
+}
+\def\ifsetsucceed{\conditionalsucceed{ifset}}
+\def\ifsetfail{\nestedignore{ifset}}
+\defineunmatchedend{ifset}
-\long\def\menu #1\end menu{}
+% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
+% defined with @set, or has been undefined with @clear.
+%
+\def\ifclear{\parsearg\ifclearxxx}
+\def\ifclearxxx #1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ \expandafter\ifclearsucceed
+ \else
+ \expandafter\ifclearfail
+ \fi
+}
+\def\ifclearsucceed{\conditionalsucceed{ifclear}}
+\def\ifclearfail{\nestedignore{ifclear}}
+\defineunmatchedend{ifclear}
+
+% @iftex always succeeds; we read the text following, through @end
+% iftex). But `@end iftex' should be valid only after an @iftex.
+%
+\def\iftex{\conditionalsucceed{iftex}}
+\defineunmatchedend{iftex}
+
+% We can't just want to start a group at @iftex (for example) and end it
+% at @end iftex, since then @set commands inside the conditional have no
+% effect (they'd get reverted at the end of the group). So we must
+% define \Eiftex to redefine itself to be its previous value. (We can't
+% just define it to fail again with an ``unmatched end'' error, since
+% the @ifset might be nested.)
+%
+\def\conditionalsucceed#1{%
+ \edef\temp{%
+ % Remember the current value of \E#1.
+ \let\nece{prevE#1} = \nece{E#1}%
+ %
+ % At the `@end #1', redefine \E#1 to be its previous value.
+ \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}%
+ }%
+ \temp
+}
+
+% We need to expand lots of \csname's, but we don't want to expand the
+% control sequences after we've constructed them.
+%
+\def\nece#1{\expandafter\noexpand\csname#1\endcsname}
+
+% @asis just yields its argument. Used with @table, for example.
+%
\def\asis#1{#1}
% @math means output in math mode.
% we read the toc file back, the $'s will be normal characters (as they
% should be, according to the definition of Texinfo). So we must use a
% control sequence to switch into and out of math mode.
-%
+%
% This isn't quite enough for @math to work properly in indices, but it
% seems unlikely it will ever be needed there.
-%
+%
\let\implicitmath = $
\def\math#1{\implicitmath #1\implicitmath}
+% @bullet and @minus need the same treatment as @math, just above.
+\def\bullet{\implicitmath\ptexbullet\implicitmath}
+\def\minus{\implicitmath-\implicitmath}
+
\def\node{\ENVcheck\parsearg\nodezzz}
\def\nodezzz#1{\nodexxx [#1,]}
\def\nodexxx[#1,#2]{\gdef\lastnode{#1}}
+\let\nwnode=\node
\let\lastnode=\relax
\def\donoderef{\ifx\lastnode\relax\else
\expandafter\expandafter\expandafter\setref{\lastnode}\fi
-\let\lastnode=\relax}
+\global\let\lastnode=\relax}
\def\unnumbnoderef{\ifx\lastnode\relax\else
\expandafter\expandafter\expandafter\unnumbsetref{\lastnode}\fi
-\let\lastnode=\relax}
+\global\let\lastnode=\relax}
\def\appendixnoderef{\ifx\lastnode\relax\else
\expandafter\expandafter\expandafter\appendixsetref{\lastnode}\fi
-\let\lastnode=\relax}
+\global\let\lastnode=\relax}
+% @refill is a no-op.
\let\refill=\relax
-
+
% @setfilename is done at the beginning of every texinfo file.
% So open here the files we need to have open while reading the input.
% This makes it possible to make a .fmt file for texinfo.
\comment % Ignore the actual filename.
}
+% @bye.
\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
-\def\inforef #1{\inforefzzz #1,,,,**}
-\def\inforefzzz #1,#2,#3,#4**{See Info file \file{\losespace#3{}},
- node \samp{\losespace#1{}}}
-\def\losespace #1{#1}
+% \def\macro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\macroxxx}
+% \def\macroxxx#1#2 \end macro{%
+% \expandafter\gdef\macrotemp#1{#2}%
+% \endgroup}
+
+%\def\linemacro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\linemacroxxx}
+%\def\linemacroxxx#1#2 \end linemacro{%
+%\let\parsearg=\relax
+%\edef\macrotempx{\csname M\butfirst\expandafter\string\macrotemp\endcsname}%
+%\expandafter\xdef\macrotemp{\parsearg\macrotempx}%
+%\expandafter\gdef\macrotempx#1{#2}%
+%\endgroup}
+
+%\def\butfirst#1{}
+
\message{fonts,}
\def\sf{\fam=\sffam \tensf}
\let\li = \sf % Sometimes we call it \li, not \sf.
+% We don't need math for this one.
+\def\ttsl{\tenttsl}
+
%% Try out Computer Modern fonts at \magstephalf
-\font\textrm=cmr10 scaled \magstephalf
-\font\texttt=cmtt10 scaled \magstephalf
+\let\mainmagstep=\magstephalf
+
+% Set the font macro #1 to the font named #2, adding on the
+% specified font prefix (normally `cm').
+% #3 is the font's design size, #4 is a scale factor
+\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
+
+% Use cm as the default font prefix.
+% To specify the font prefix, you must define \fontprefix
+% before you read in texinfo.tex.
+\ifx\fontprefix\undefined
+\def\fontprefix{cm}
+\fi
+% Support font families that don't use the same naming scheme as CM.
+\def\rmshape{r}
+\def\rmbshape{bx} %where the normal face is bold
+\def\bfshape{b}
+\def\bxshape{bx}
+\def\ttshape{tt}
+\def\ttbshape{tt}
+\def\ttslshape{sltt}
+\def\itshape{ti}
+\def\itbshape{bxti}
+\def\slshape{sl}
+\def\slbshape{bxsl}
+\def\sfshape{ss}
+\def\sfbshape{ss}
+\def\scshape{csc}
+\def\scbshape{csc}
+
+\ifx\bigger\relax
+\let\mainmagstep=\magstep1
+\setfont\textrm\rmshape{12}{1000}
+\setfont\texttt\ttshape{12}{1000}
+\else
+\setfont\textrm\rmshape{10}{\mainmagstep}
+\setfont\texttt\ttshape{10}{\mainmagstep}
+\fi
% Instead of cmb10, you many want to use cmbx10.
% cmbx10 is a prettier font on its own, but cmb10
% looks better when embedded in a line with cmr10.
-\font\textbf=cmb10 scaled \magstephalf
-\font\textit=cmti10 scaled \magstephalf
-\font\textsl=cmsl10 scaled \magstephalf
-\font\textsf=cmss10 scaled \magstephalf
-\font\textsc=cmcsc10 scaled \magstephalf
-\font\texti=cmmi10 scaled \magstephalf
-\font\textsy=cmsy10 scaled \magstephalf
+\setfont\textbf\bfshape{10}{\mainmagstep}
+\setfont\textit\itshape{10}{\mainmagstep}
+\setfont\textsl\slshape{10}{\mainmagstep}
+\setfont\textsf\sfshape{10}{\mainmagstep}
+\setfont\textsc\scshape{10}{\mainmagstep}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
% A few fonts for @defun, etc.
-\font\defbf=cmbx10 scaled \magstep1 %was 1314
-\font\deftt=cmtt10 scaled \magstep1
+\setfont\defbf\bxshape{10}{\magstep1} %was 1314
+\setfont\deftt\ttshape{10}{\magstep1}
\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
-% Fonts for indices and small examples.
-% We actually use the slanted font rather than the italic,
+% Fonts for indices and small examples (9pt).
+% We actually use the slanted font rather than the italic,
% because texinfo normally uses the slanted fonts for that.
% Do not make many font distinctions in general in the index, since they
% aren't very useful.
-\font\ninett=cmtt9
-\font\indrm=cmr9
-\font\indit=cmsl9
+\setfont\ninett\ttshape{9}{1000}
+\setfont\indrm\rmshape{9}{1000}
+\setfont\indit\slshape{9}{1000}
\let\indsl=\indit
\let\indtt=\ninett
+\let\indttsl=\ninett
\let\indsf=\indrm
\let\indbf=\indrm
-\let\indsc=\indrm
+\setfont\indsc\scshape{10}{900}
\font\indi=cmmi9
\font\indsy=cmsy9
-% Fonts for headings
-\font\chaprm=cmbx12 scaled \magstep2
-\font\chapit=cmti12 scaled \magstep2
-\font\chapsl=cmsl12 scaled \magstep2
-\font\chaptt=cmtt12 scaled \magstep2
-\font\chapsf=cmss12 scaled \magstep2
+% Chapter (and unnumbered) fonts (17.28pt).
+\setfont\chaprm\rmbshape{12}{\magstep2}
+\setfont\chapit\itbshape{10}{\magstep3}
+\setfont\chapsl\slbshape{10}{\magstep3}
+\setfont\chaptt\ttbshape{12}{\magstep2}
+\setfont\chapttsl\ttslshape{10}{\magstep3}
+\setfont\chapsf\sfbshape{12}{\magstep2}
\let\chapbf=\chaprm
-\font\chapsc=cmcsc10 scaled\magstep3
+\setfont\chapsc\scbshape{10}{\magstep3}
\font\chapi=cmmi12 scaled \magstep2
\font\chapsy=cmsy10 scaled \magstep3
-\font\secrm=cmbx12 scaled \magstep1
-\font\secit=cmti12 scaled \magstep1
-\font\secsl=cmsl12 scaled \magstep1
-\font\sectt=cmtt12 scaled \magstep1
-\font\secsf=cmss12 scaled \magstep1
-\font\secbf=cmbx12 scaled \magstep1
-\font\secsc=cmcsc10 scaled\magstep2
+% Section fonts (14.4pt).
+\setfont\secrm\rmbshape{12}{\magstep1}
+\setfont\secit\itbshape{10}{\magstep2}
+\setfont\secsl\slbshape{10}{\magstep2}
+\setfont\sectt\ttbshape{12}{\magstep1}
+\setfont\secttsl\ttslshape{10}{\magstep2}
+\setfont\secsf\sfbshape{12}{\magstep1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep2}
\font\seci=cmmi12 scaled \magstep1
\font\secsy=cmsy10 scaled \magstep2
-% \font\ssecrm=cmbx10 scaled \magstep1 % This size an font looked bad.
-% \font\ssecit=cmti10 scaled \magstep1 % The letters were too crowded.
-% \font\ssecsl=cmsl10 scaled \magstep1
-% \font\ssectt=cmtt10 scaled \magstep1
-% \font\ssecsf=cmss10 scaled \magstep1
+% \setfont\ssecrm\bxshape{10}{\magstep1} % This size an font looked bad.
+% \setfont\ssecit\itshape{10}{\magstep1} % The letters were too crowded.
+% \setfont\ssecsl\slshape{10}{\magstep1}
+% \setfont\ssectt\ttshape{10}{\magstep1}
+% \setfont\ssecsf\sfshape{10}{\magstep1}
-%\font\ssecrm=cmb10 scaled 1315 % Note the use of cmb rather than cmbx.
-%\font\ssecit=cmti10 scaled 1315 % Also, the size is a little larger than
-%\font\ssecsl=cmsl10 scaled 1315 % being scaled magstep1.
-%\font\ssectt=cmtt10 scaled 1315
-%\font\ssecsf=cmss10 scaled 1315
+%\setfont\ssecrm\bfshape{10}{1315} % Note the use of cmb rather than cmbx.
+%\setfont\ssecit\itshape{10}{1315} % Also, the size is a little larger than
+%\setfont\ssecsl\slshape{10}{1315} % being scaled magstep1.
+%\setfont\ssectt\ttshape{10}{1315}
+%\setfont\ssecsf\sfshape{10}{1315}
%\let\ssecbf=\ssecrm
-\font\ssecrm=cmbx12 scaled \magstephalf
-\font\ssecit=cmti12 scaled \magstephalf
-\font\ssecsl=cmsl12 scaled \magstephalf
-\font\ssectt=cmtt12 scaled \magstephalf
-\font\ssecsf=cmss12 scaled \magstephalf
-\font\ssecbf=cmbx12 scaled \magstephalf
-\font\ssecsc=cmcsc10 scaled \magstep1
+% Subsection fonts (13.15pt).
+\setfont\ssecrm\rmbshape{12}{\magstephalf}
+\setfont\ssecit\itbshape{10}{1315}
+\setfont\ssecsl\slbshape{10}{1315}
+\setfont\ssectt\ttbshape{12}{\magstephalf}
+\setfont\ssecttsl\ttslshape{10}{\magstep1}
+\setfont\ssecsf\sfbshape{12}{\magstephalf}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{\magstep1}
\font\sseci=cmmi12 scaled \magstephalf
\font\ssecsy=cmsy10 scaled \magstep1
% The smallcaps and symbol fonts should actually be scaled \magstep1.5,
% but that is not a standard magnification.
% Fonts for title page:
-\font\titlerm = cmbx12 scaled \magstep3
+\setfont\titlerm\rmbshape{12}{\magstep3}
\let\authorrm = \secrm
% In order for the font changes to affect most math symbols and letters,
% texinfo doesn't allow for producing subscripts and superscripts, we
% don't bother to reset \scriptfont and \scriptscriptfont (which would
% also require loading a lot more fonts).
-%
+%
\def\resetmathfonts{%
\textfont0 = \tenrm \textfont1 = \teni \textfont2 = \tensy
\textfont\itfam = \tenit \textfont\slfam = \tensl \textfont\bffam = \tenbf
% The font-changing commands redefine the meanings of \tenSTYLE, instead
% of just \STYLE. We do this so that font changes will continue to work
% in math mode, where it is the current \fam that is relevant in most
-% cases, not the current. Plain TeX does, for example,
-% \def\bf{\fam=\bffam \tenbf} By redefining \tenbf, we obviate the need
-% to redefine \bf itself.
+% cases, not the current font. Plain TeX does \def\bf{\fam=\bffam
+% \tenbf}, for example. By redefining \tenbf, we obviate the need to
+% redefine \bf itself.
\def\textfonts{%
\let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
\let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
- \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
+ \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
\resetmathfonts}
\def\chapfonts{%
- \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
+ \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
\let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
- \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
- \resetmathfonts}
+ \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
+ \resetmathfonts \setleading{19pt}}
\def\secfonts{%
\let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
- \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\sectt
- \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
- \resetmathfonts}
+ \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
+ \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl
+ \resetmathfonts \setleading{16pt}}
\def\subsecfonts{%
\let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
\let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
- \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
- \resetmathfonts}
+ \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
+ \resetmathfonts \setleading{15pt}}
+\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
\def\indexfonts{%
- \let\tenrm=\indrm \let\tenit=\tenit \let\tensl=\indsl
+ \let\tenrm=\indrm \let\tenit=\indit \let\tensl=\indsl
\let\tenbf=\indbf \let\tentt=\indtt \let\smallcaps=\indsc
- \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy
- \resetmathfonts}
+ \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy \let\tenttsl=\indttsl
+ \resetmathfonts \setleading{12pt}}
% Set up the default fonts, so we can use them for creating boxes.
-%
+%
\textfonts
% Count depth in font-changes, for error checks
\newcount\fontdepth \fontdepth=0
% Fonts for short table of contents.
-\font\shortcontrm=cmr12
-\font\shortcontbf=cmbx12
-\font\shortcontsl=cmsl12
+\setfont\shortcontrm\rmshape{12}{1000}
+\setfont\shortcontbf\bxshape{12}{1000}
+\setfont\shortcontsl\slshape{12}{1000}
%% Add scribe-like font environments, plus @l for inline lisp (usually sans
%% serif) and @ii for TeX italic
\def\b#1{{\bf #1}}
\let\strong=\b
-\def\t#1{{\tt \exhyphenpenalty=10000\rawbackslash \frenchspacing #1}\null}
-\let\ttfont = \t
-%\def\samp #1{`{\tt \rawbackslash \frenchspacing #1}'\null}
+% We can't just use \exhyphenpenalty, because that only has effect at
+% the end of a paragraph. Restore normal hyphenation at the end of the
+% group within which \nohyphenation is presumably called.
+%
+\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
+\def\restorehyphenation{\hyphenchar\font = `- }
+
+\def\t#1{%
+ {\tt \rawbackslash \frenchspacing #1}%
+ \null
+}
+\let\ttfont=\t
\def\samp #1{`\tclose{#1}'\null}
-\def\key #1{{\tt \exhyphenpenalty=10000\uppercase{#1}}\null}
+\setfont\smallrm\rmshape{8}{1000}
+\font\smallsy=cmsy9
+\def\key#1{{\smallrm\textfont2=\smallsy \leavevmode\hbox{%
+ \raise0.4pt\hbox{$\langle$}\kern-.08em\vtop{%
+ \vbox{\hrule\kern-0.4pt
+ \hbox{\raise0.4pt\hbox{\vphantom{$\langle$}}#1}}%
+ \kern-0.4pt\hrule}%
+ \kern-.06em\raise0.4pt\hbox{$\rangle$}}}}
+% The old definition, with no lozenge:
+%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
\def\ctrl #1{{\tt \rawbackslash \hat}#1}
\let\file=\samp
+\let\url=\samp % perhaps include a hypertex \special eventually
+\def\email#1{$\langle${\tt #1}$\rangle$}
% @code is a modification of @t,
% which makes spaces the same size as normal in the surrounding text.
-\newdimen\tclosesave
-\newdimen\tcloserm
-\def\tclose#1{{\rm \tcloserm=\fontdimen2\font \tt \tclosesave=\fontdimen2\font
-\fontdimen2\font=\tcloserm
-% prevent breaking lines at hyphens.
-\exhyphenpenalty=10000
-\def\ {{\fontdimen2\font=\tclosesave{} }}%
- \rawbackslash \frenchspacing #1\fontdimen2\font=\tclosesave}\null}
-\let\code=\tclose
+\def\tclose#1{%
+ {%
+ % Change normal interword space to be same as for the current font.
+ \spaceskip = \fontdimen2\font
+ %
+ % Switch to typewriter.
+ \tt
+ %
+ % But `\ ' produces the large typewriter interword space.
+ \def\ {{\spaceskip = 0pt{} }}%
+ %
+ % Turn off hyphenation.
+ \nohyphenation
+ %
+ \rawbackslash
+ \frenchspacing
+ #1%
+ }%
+ \null
+}
+
+% We *must* turn on hyphenation at `-' and `_' in \code.
+% Otherwise, it is too hard to avoid overfull hboxes
+% in the Emacs manual, the Library manual, etc.
+
+% Unfortunately, TeX uses one parameter (\hyphenchar) to control
+% both hyphenation at - and hyphenation within words.
+% We must therefore turn them both off (\tclose does that)
+% and arrange explicitly to hyphenate at a dash.
+% -- rms.
+{
+\catcode`\-=\active
+\catcode`\_=\active
+\global\def\code{\begingroup \catcode`\-=\active \let-\codedash \catcode`\_=\active \let_\codeunder \codex}
+% The following is used by \doprintindex to insure that long function names
+% wrap around. It is necessary for - and _ to be active before the index is
+% read from the file, as \entry parses the arguments long before \code is
+% ever called. -- mycroft
+\global\def\indexbreaks{\catcode`\-=\active \let-\realdash \catcode`\_=\active \let_\realunder}
+}
+
+\def\realdash{-}
+\def\realunder{_}
+\def\codedash{-\discretionary{}{}{}}
+\def\codeunder{\normalunderscore\discretionary{}{}{}}
+\def\codex #1{\tclose{#1}\endgroup}
+
%\let\exp=\tclose %Was temporary
-% @kbd is like @code, except that if the argument is just one @key command,
+% @kbd is like @code, except that if the argument is just one @key command,
% then @kbd has no effect.
-
+%
\def\xkey{\key}
\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
\ifx\one\xkey\ifx\threex\three \key{#2}%
-\else\tclose{\look}\fi
-\else\tclose{\look}\fi}
+\else{\tclose{\ttsl\look}}\fi
+\else{\tclose{\ttsl\look}}\fi}
+
+% Check if we are currently using a typewriter font. Since all the
+% Computer Modern typewriter fonts have zero interword stretch (and
+% shrink), and it is reasonable to expect all typewriter fonts to have
+% this property, we can check that font parameter.
+%
+\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
% argument is to make the input look right: @dmn{pt} instead of
% @dmn{}pt.
-%
+%
\def\dmn#1{\thinspace #1}
\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
-\def\l#1{{\li #1}\null} %
+% @l was never documented to mean ``switch to the Lisp font'',
+% and it is not used as such in any manual I can find. We need it for
+% Polish suppressed-l. --karl, 22sep96.
+%\def\l#1{{\li #1}\null}
-\def\r#1{{\rm #1}} % roman font
+\def\r#1{{\rm #1}} % roman font
% Use of \lowercase was suggested.
-\def\sc#1{{\smallcaps#1}} % smallcaps font
-\def\ii#1{{\it #1}} % italic font
+\def\sc#1{{\smallcaps#1}} % smallcaps font
+\def\ii#1{{\it #1}} % italic font
+
+% @pounds{} is a sterling sign.
+\def\pounds{{\it\$}}
+
\message{page headings,}
% First the title page. Must do @settitle before @titlepage.
\def\titlefont#1{{\titlerm #1}}
-\newtoks\realeverypar
\newif\ifseenauthor
\newif\iffinishedtitlepage
+\def\shorttitlepage{\parsearg\shorttitlepagezzz}
+\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
+ \endgroup\page\hbox{}\page}
+
\def\titlepage{\begingroup \parindent=0pt \textfonts
\let\subtitlerm=\tenrm
% I deinstalled the following change because \cmr12 is undefined.
% Now you can print the title using @title.
\def\title{\parsearg\titlezzz}%
\def\titlezzz##1{\leftline{\titlefont{##1}}
- % print a rule at the page bottom also.
- \finishedtitlepagefalse
- \vskip4pt \hrule height 4pt \vskip4pt}%
+ % print a rule at the page bottom also.
+ \finishedtitlepagefalse
+ \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
% No rule at page bottom unless we print one at the top with @title.
\finishedtitlepagetrue
%
\def\author{\parsearg\authorzzz}%
\def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi
{\authorfont \leftline{##1}}}%
- %
+ %
% Most title ``pages'' are actually two pages long, with space
% at the top of the second. We don't want the ragged left on the second.
\let\oldpage = \page
\def\page{%
\iffinishedtitlepage\else
- \finishtitlepage
+ \finishtitlepage
\fi
\oldpage
\let\page = \oldpage
}
\def\finishtitlepage{%
- \vskip4pt \hrule height 2pt
+ \vskip4pt \hrule height 2pt width \hsize
\vskip\titlepagebottomglue
\finishedtitlepagetrue
}
%
}% unbind the catcode of @.
-% @headings double turns headings on for double-sided printing.
-% @headings single turns headings on for single-sided printing.
-% @headings off turns them off.
-% @headings on same as @headings double, retained for compatibility.
-% @headings after turns on double-sided headings after this page.
-% @headings doubleafter turns on double-sided headings after this page.
+% @headings double turns headings on for double-sided printing.
+% @headings single turns headings on for single-sided printing.
+% @headings off turns them off.
+% @headings on same as @headings double, retained for compatibility.
+% @headings after turns on double-sided headings after this page.
+% @headings doubleafter turns on double-sided headings after this page.
% @headings singleafter turns on single-sided headings after this page.
-% By default, they are off.
+% By default, they are off at the start of a document,
+% and turned `on' after @end titlepage.
\def\headings #1 {\csname HEADINGS#1\endcsname}
% title on inside top of left hand pages, and page numbers on outside top
% edge of all pages.
\def\HEADINGSdouble{
-%\pagealignmacro
\global\pageno=1
\global\evenfootline={\hfil}
\global\oddfootline={\hfil}
\global\evenheadline={\line{\folio\hfil\thistitle}}
\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
}
+\let\contentsalignmacro = \chappager
+
% For single-sided printing, chapter title goes across top left of page,
% page number on top right.
\def\HEADINGSsingle{
-%\pagealignmacro
\global\pageno=1
\global\evenfootline={\hfil}
\global\oddfootline={\hfil}
\global\evenheadline={\line{\thischapter\hfil\folio}}
\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
}
\def\HEADINGSon{\HEADINGSdouble}
\global\oddfootline={\hfil}
\global\evenheadline={\line{\folio\hfil\thistitle}}
\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
}
\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
\global\oddfootline={\hfil}
\global\evenheadline={\line{\thischapter\hfil\folio}}
\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
}
% Subroutines used in generating headings
\def\settitle{\parsearg\settitlezzz}
\def\settitlezzz #1{\gdef\thistitle{#1}}
+
\message{tables,}
% @tabs -- simple alignment
%\def\tablinezzz #1{\+#1\cr}
%\def\&{&}
-% Tables -- @table, @ftable, @item(x), @kitem(x), @xitem(x).
+% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
% default indentation of table text
\newdimen\tableindent \tableindent=.8in
% used internally for \itemindent minus \itemmargin
\newdimen\itemmax
-% Note @table and @ftable define @item, @itemx, etc., with these defs.
+% Note @table, @vtable, and @vtable define @item, @itemx, etc., with
+% these defs.
% They also define \itemindex
% to index the item name in whatever manner is desired (perhaps none).
+\newif\ifitemxneedsnegativevskip
+
+\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
+
\def\internalBitem{\smallbreak \parsearg\itemzzz}
-\def\internalBitemx{\par \parsearg\itemzzz}
+\def\internalBitemx{\itemxpar \parsearg\itemzzz}
\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz}
-\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \par \parsearg\xitemzzz}
+\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz}
\def\internalBkitem{\smallbreak \parsearg\kitemzzz}
-\def\internalBkitemx{\par \parsearg\kitemzzz}
+\def\internalBkitemx{\itemxpar \parsearg\kitemzzz}
\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}%
\itemzzz {#1}}
\itemzzz {#1}}
\def\itemzzz #1{\begingroup %
-\advance \hsize by -\rightskip %
-\advance \hsize by -\leftskip %
-\setbox0=\hbox{\itemfont{#1}}%
-\itemindex{#1}%
-\parskip=0in %
-\noindent %
-\ifdim \wd0>\itemmax %
-\vadjust{\penalty 10000}%
-\hbox to \hsize{\hskip -\tableindent\box0\hss}\ %
-\else %
-\hbox to 0pt{\hskip -\tableindent\box0\hss}%
-\fi %
-\endgroup %
+ \advance\hsize by -\rightskip
+ \advance\hsize by -\tableindent
+ \setbox0=\hbox{\itemfont{#1}}%
+ \itemindex{#1}%
+ \nobreak % This prevents a break before @itemx.
+ %
+ % Be sure we are not still in the middle of a paragraph.
+ %{\parskip = 0in
+ %\par
+ %}%
+ %
+ % If the item text does not fit in the space we have, put it on a line
+ % by itself, and do not allow a page break either before or after that
+ % line. We do not start a paragraph here because then if the next
+ % command is, e.g., @kindex, the whatsit would get put into the
+ % horizontal list on a line by itself, resulting in extra blank space.
+ \ifdim \wd0>\itemmax
+ %
+ % Make this a paragraph so we get the \parskip glue and wrapping,
+ % but leave it ragged-right.
+ \begingroup
+ \advance\leftskip by-\tableindent
+ \advance\hsize by\tableindent
+ \advance\rightskip by0pt plus1fil
+ \leavevmode\unhbox0\par
+ \endgroup
+ %
+ % We're going to be starting a paragraph, but we don't want the
+ % \parskip glue -- logically it's part of the @item we just started.
+ \nobreak \vskip-\parskip
+ %
+ % Stop a page break at the \parskip glue coming up. Unfortunately
+ % we can't prevent a possible page break at the following
+ % \baselineskip glue.
+ \nobreak
+ \endgroup
+ \itemxneedsnegativevskipfalse
+ \else
+ % The item text fits into the space. Start a paragraph, so that the
+ % following text (if any) will end up on the same line. Since that
+ % text will be indented by \tableindent, we make the item text be in
+ % a zero-width box.
+ \noindent
+ \rlap{\hskip -\tableindent\box0}\ignorespaces%
+ \endgroup%
+ \itemxneedsnegativevskiptrue%
+ \fi
}
\def\item{\errmessage{@item while not in a table}}
{\obeylines\obeyspaces%
\gdef\ftablex #1^^M{%
\tabley\fnitemindex#1 \endtabley
-\def\Eftable{\endgraf\endgroup\afterenvbreak}%
+\def\Eftable{\endgraf\afterenvbreak\endgroup}%
+\let\Etable=\relax}}
+
+\def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex}
+{\obeylines\obeyspaces%
+\gdef\vtablex #1^^M{%
+\tabley\vritemindex#1 \endtabley
+\def\Evtable{\endgraf\afterenvbreak\endgroup}%
\let\Etable=\relax}}
\def\dontindex #1{}
\def\fnitemindex #1{\doind {fn}{\code{#1}}}%
+\def\vritemindex #1{\doind {vr}{\code{#1}}}%
{\obeyspaces %
\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup%
\def\tablez #1#2#3#4#5#6{%
\aboveenvbreak %
\begingroup %
-\def\Edescription{\Etable}% Neccessary kludge.
+\def\Edescription{\Etable}% Necessary kludge.
\let\itemindex=#1%
\ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
\ifnum 0#4>0 \tableindent=#4\mil \fi %
\itemmax=\tableindent %
\advance \itemmax by -\itemmargin %
\advance \leftskip by \tableindent %
+\exdentamount=\tableindent
\parindent = 0pt
\parskip = \smallskipamount
\ifdim \parskip=0pt \parskip=2pt \fi%
-\def\Etable{\endgraf\endgroup\afterenvbreak}%
+\def\Etable{\endgraf\afterenvbreak\endgroup}%
\let\item = \internalBitem %
\let\itemx = \internalBitemx %
\let\kitem = \internalBkitem %
\def\itemize{\parsearg\itemizezzz}
-\def\itemizezzz #1{\itemizey {#1}{\Eitemize}}
+\def\itemizezzz #1{%
+ \begingroup % ended by the @end itemsize
+ \itemizey {#1}{\Eitemize}
+}
\def\itemizey #1#2{%
\aboveenvbreak %
-\begingroup %
-\itemno = 0 %
\itemmax=\itemindent %
\advance \itemmax by -\itemmargin %
\advance \leftskip by \itemindent %
-\parindent = 0pt
-\parskip = \smallskipamount
+\exdentamount=\itemindent
+\parindent = 0pt %
+\parskip = \smallskipamount %
\ifdim \parskip=0pt \parskip=2pt \fi%
-\def#2{\endgraf\endgroup\afterenvbreak}%
+\def#2{\endgraf\afterenvbreak\endgroup}%
\def\itemcontents{#1}%
\let\item=\itemizeitem}
-\def\bullet{$\ptexbullet$}
-\def\minus{$-$}
-
% Set sfcode to normal for the chars that usually have another value.
% These are `.?!:;,'
\def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000
\sfcode58=1000 \sfcode59=1000 \sfcode44=1000 }
-\def\enumerate{\itemizey{\the\itemno.}\Eenumerate\flushcr}
+% \splitoff TOKENS\endmark defines \first to be the first token in
+% TOKENS, and \rest to be the remainder.
+%
+\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
+
+% Allow an optional argument of an uppercase letter, lowercase letter,
+% or number, to specify the first label in the enumerated list. No
+% argument is the same as `1'.
+%
+\def\enumerate{\parsearg\enumeratezzz}
+\def\enumeratezzz #1{\enumeratey #1 \endenumeratey}
+\def\enumeratey #1 #2\endenumeratey{%
+ \begingroup % ended by the @end enumerate
+ %
+ % If we were given no argument, pretend we were given `1'.
+ \def\thearg{#1}%
+ \ifx\thearg\empty \def\thearg{1}\fi
+ %
+ % Detect if the argument is a single token. If so, it might be a
+ % letter. Otherwise, the only valid thing it can be is a number.
+ % (We will always have one token, because of the test we just made.
+ % This is a good thing, since \splitoff doesn't work given nothing at
+ % all -- the first parameter is undelimited.)
+ \expandafter\splitoff\thearg\endmark
+ \ifx\rest\empty
+ % Only one token in the argument. It could still be anything.
+ % A ``lowercase letter'' is one whose \lccode is nonzero.
+ % An ``uppercase letter'' is one whose \lccode is both nonzero, and
+ % not equal to itself.
+ % Otherwise, we assume it's a number.
+ %
+ % We need the \relax at the end of the \ifnum lines to stop TeX from
+ % continuing to look for a <number>.
+ %
+ \ifnum\lccode\expandafter`\thearg=0\relax
+ \numericenumerate % a number (we hope)
+ \else
+ % It's a letter.
+ \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
+ \lowercaseenumerate % lowercase letter
+ \else
+ \uppercaseenumerate % uppercase letter
+ \fi
+ \fi
+ \else
+ % Multiple tokens in the argument. We hope it's a number.
+ \numericenumerate
+ \fi
+}
-\def\alphaenumerate{\itemizey{\ifcase\itemno\or
-a\or b\or c\or d\or e\or f\or g\or h\or i\or j\or k\or l\or m\or n\or o\or
-p\or q\or r\or s\or t\or u\or v\or w\or x\or y\or z\else
-\errmessage{More than 26 items in @ecapitate; get a bigger alphabet.}\fi.}%
-\Ealphaenumerate\flushcr}
+% An @enumerate whose labels are integers. The starting integer is
+% given in \thearg.
+%
+\def\numericenumerate{%
+ \itemno = \thearg
+ \startenumeration{\the\itemno}%
+}
-\def\capsenumerate{\itemizey{\ifcase\itemno\or
-A\or B\or C\or D\or E\or F\or G\or H\or I\or J\or K\or L\or M\or N\or O\or
-P\or Q\or R\or S\or T\or U\or V\or W\or X\or Y\or Z\else
-\errmessage{More than 26 items in @capsenumerate; get a bigger alphabet.}\fi.}%
-\Ecapsenumerate\flushcr}
+% The starting (lowercase) letter is in \thearg.
+\def\lowercaseenumerate{%
+ \itemno = \expandafter`\thearg
+ \startenumeration{%
+ % Be sure we're not beyond the end of the alphabet.
+ \ifnum\itemno=0
+ \errmessage{No more lowercase letters in @enumerate; get a bigger
+ alphabet}%
+ \fi
+ \char\lccode\itemno
+ }%
+}
+
+% The starting (uppercase) letter is in \thearg.
+\def\uppercaseenumerate{%
+ \itemno = \expandafter`\thearg
+ \startenumeration{%
+ % Be sure we're not beyond the end of the alphabet.
+ \ifnum\itemno=0
+ \errmessage{No more uppercase letters in @enumerate; get a bigger
+ alphabet}
+ \fi
+ \char\uccode\itemno
+ }%
+}
+
+% Call itemizey, adding a period to the first argument and supplying the
+% common last two arguments. Also subtract one from the initial value in
+% \itemno, since @item increments \itemno.
+%
+\def\startenumeration#1{%
+ \advance\itemno by -1
+ \itemizey{#1.}\Eenumerate\flushcr
+}
+
+% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
+% to @enumerate.
+%
+\def\alphaenumerate{\enumerate{a}}
+\def\capsenumerate{\enumerate{A}}
+\def\Ealphaenumerate{\Eenumerate}
+\def\Ecapsenumerate{\Eenumerate}
% Definition of @item while inside @itemize.
\ifhmode \errmessage{\in hmode at itemizeitem}\fi
{\parskip=0in \hskip 0pt
\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
-\vadjust{\penalty 300}}%
+\vadjust{\penalty 1200}}%
\flushcr}
+% @multitable macros
+% Amy Hendrickson, 8/18/94, 3/6/96
+%
+% @multitable ... @end multitable will make as many columns as desired.
+% Contents of each column will wrap at width given in preamble. Width
+% can be specified either with sample text given in a template line,
+% or in percent of \hsize, the current width of text on page.
+
+% Table can continue over pages but will only break between lines.
+
+% To make preamble:
+%
+% Either define widths of columns in terms of percent of \hsize:
+% @multitable @columnfractions .25 .3 .45
+% @item ...
+%
+% Numbers following @columnfractions are the percent of the total
+% current hsize to be used for each column. You may use as many
+% columns as desired.
+
+
+% Or use a template:
+% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+% @item ...
+% using the widest term desired in each column.
+%
+% For those who want to use more than one line's worth of words in
+% the preamble, break the line within one argument and it
+% will parse correctly, i.e.,
+%
+% @multitable {Column 1 template} {Column 2 template} {Column 3
+% template}
+% Not:
+% @multitable {Column 1 template} {Column 2 template}
+% {Column 3 template}
+
+% Each new table line starts with @item, each subsequent new column
+% starts with @tab. Empty columns may be produced by supplying @tab's
+% with nothing between them for as many times as empty columns are needed,
+% ie, @tab@tab@tab will produce two empty columns.
+
+% @item, @tab, @multitable or @end multitable do not need to be on their
+% own lines, but it will not hurt if they are.
+
+% Sample multitable:
+
+% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+% @item first col stuff @tab second col stuff @tab third col
+% @item
+% first col stuff
+% @tab
+% second col stuff
+% @tab
+% third col
+% @item first col stuff @tab second col stuff
+% @tab Many paragraphs of text may be used in any column.
+%
+% They will wrap at the width determined by the template.
+% @item@tab@tab This will be in third column.
+% @end multitable
+
+% Default dimensions may be reset by user.
+% @multitableparskip is vertical space between paragraphs in table.
+% @multitableparindent is paragraph indent in table.
+% @multitablecolmargin is horizontal space to be left between columns.
+% @multitablelinespace is space to leave between table items, baseline
+% to baseline.
+% 0pt means it depends on current normal line spacing.
+
+%%%%
+% Dimensions
+
+\newskip\multitableparskip
+\newskip\multitableparindent
+\newdimen\multitablecolspace
+\newskip\multitablelinespace
+\multitableparskip=0pt
+\multitableparindent=6pt
+\multitablecolspace=12pt
+\multitablelinespace=0pt
+
+%%%%
+% Macros used to set up halign preamble:
+\let\endsetuptable\relax
+\def\xendsetuptable{\endsetuptable}
+\let\columnfractions\relax
+\def\xcolumnfractions{\columnfractions}
+\newif\ifsetpercent
+
+%% 2/1/96, to allow fractions to be given with more than one digit.
+\def\pickupwholefraction#1 {\global\advance\colcount by1 %
+\expandafter\xdef\csname col\the\colcount\endcsname{.#1\hsize}%
+\setuptable}
+
+\newcount\colcount
+\def\setuptable#1{\def\firstarg{#1}%
+\ifx\firstarg\xendsetuptable\let\go\relax%
+\else
+ \ifx\firstarg\xcolumnfractions\global\setpercenttrue%
+ \else
+ \ifsetpercent
+ \let\go\pickupwholefraction % In this case arg of setuptable
+ % is the decimal point before the
+ % number given in percent of hsize.
+ % We don't need this so we don't use it.
+ \else
+ \global\advance\colcount by1
+ \setbox0=\hbox{#1 }% Add a normal word space as a separator;
+ % typically that is always in the input, anyway.
+ \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
+ \fi%
+ \fi%
+\ifx\go\pickupwholefraction\else\let\go\setuptable\fi%
+\fi\go}
+
+%%%%
+% multitable syntax
+\def\tab{&\hskip1sp\relax} % 2/2/96
+ % tiny skip here makes sure this column space is
+ % maintained, even if it is never used.
+
+
+%%%%
+% @multitable ... @end multitable definitions:
+
+\def\multitable{\parsearg\dotable}
+
+\def\dotable#1{\bgroup
+\let\item\cr
+\tolerance=9500
+\hbadness=9500
+\setmultitablespacing
+\parskip=\multitableparskip
+\parindent=\multitableparindent
+\overfullrule=0pt
+\global\colcount=0\relax%
+\def\Emultitable{\global\setpercentfalse\global\everycr{}\cr\egroup\egroup}%
+ % To parse everything between @multitable and @item :
+\setuptable#1 \endsetuptable
+ % Need to reset this to 0 after \setuptable.
+\global\colcount=0\relax%
+ %
+ % This preamble sets up a generic column definition, which will
+ % be used as many times as user calls for columns.
+ % \vtop will set a single line and will also let text wrap and
+ % continue for many paragraphs if desired.
+\halign\bgroup&\global\advance\colcount by 1\relax%
+\multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
+ % In order to keep entries from bumping into each other
+ % we will add a \leftskip of \multitablecolspace to all columns after
+ % the first one.
+ % If a template has been used, we will add \multitablecolspace
+ % to the width of each template entry.
+ % If user has set preamble in terms of percent of \hsize
+ % we will use that dimension as the width of the column, and
+ % the \leftskip will keep entries from bumping into each other.
+ % Table will start at left margin and final column will justify at
+ % right margin.
+\ifnum\colcount=1
+\else
+ \ifsetpercent
+ \else
+ % If user has <not> set preamble in terms of percent of \hsize
+ % we will advance \hsize by \multitablecolspace
+ \advance\hsize by \multitablecolspace
+ \fi
+ % In either case we will make \leftskip=\multitablecolspace:
+\leftskip=\multitablecolspace
+\fi
+\noindent##\multistrut}\cr%
+ % \everycr will reset column counter, \colcount, at the end of
+ % each line. Every column entry will cause \colcount to advance by one.
+ % The table preamble
+ % looks at the current \colcount to find the correct column width.
+\global\everycr{\noalign{%
+\filbreak%% keeps underfull box messages off when table breaks over pages.
+\global\colcount=0\relax}}
+}
+
+\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
+% If so, do nothing. If not, give it an appropriate dimension based on
+% current baselineskip.
+\ifdim\multitablelinespace=0pt
+%% strut to put in table in case some entry doesn't have descenders,
+%% to keep lines equally spaced
+\let\multistrut = \strut
+%% Test to see if parskip is larger than space between lines of
+%% table. If not, do nothing.
+%% If so, set to same dimension as multitablelinespace.
+\else
+\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
+width0pt\relax} \fi
+\ifdim\multitableparskip>\multitablelinespace
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
+ %% than skip between lines in the table.
+\fi%
+\ifdim\multitableparskip=0pt
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
+ %% than skip between lines in the table.
+\fi}
+
+
\message{indexing,}
% Index generation facilities
% It automatically defines \fooindex such that
% \fooindex ...rest of line... puts an entry in the index foo.
% It also defines \fooindfile to be the number of the output channel for
-% the file that accumulates this index. The file's extension is foo.
+% the file that accumulates this index. The file's extension is foo.
% The name of an index should be no more than 2 characters long
% for the sake of vms.
\def\newindex #1{
\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
-\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
+\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
+\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
\noexpand\doindex {#1}}
}
\def\newcodeindex #1{
\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
-\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
+\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
+\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
\noexpand\docodeindex {#1}}
}
\def\synindex #1 #2 {%
\expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
\expandafter\let\csname#1indfile\endcsname=\synindexfoo
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
+\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
\noexpand\doindex {#2}}%
}
\def\syncodeindex #1 #2 {%
\expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
\expandafter\let\csname#1indfile\endcsname=\synindexfoo
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
+\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
\noexpand\docodeindex {#2}}%
}
\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
\def\indexdummies{%
+% Take care of the plain tex accent commands.
+\def\"{\realbackslash "}%
+\def\`{\realbackslash `}%
+\def\'{\realbackslash '}%
+\def\^{\realbackslash ^}%
+\def\~{\realbackslash ~}%
+\def\={\realbackslash =}%
+\def\b{\realbackslash b}%
+\def\c{\realbackslash c}%
+\def\d{\realbackslash d}%
+\def\u{\realbackslash u}%
+\def\v{\realbackslash v}%
+\def\H{\realbackslash H}%
+% Take care of the plain tex special European modified letters.
+\def\oe{\realbackslash oe}%
+\def\ae{\realbackslash ae}%
+\def\aa{\realbackslash aa}%
+\def\OE{\realbackslash OE}%
+\def\AE{\realbackslash AE}%
+\def\AA{\realbackslash AA}%
+\def\o{\realbackslash o}%
+\def\O{\realbackslash O}%
+\def\l{\realbackslash l}%
+\def\L{\realbackslash L}%
+\def\ss{\realbackslash ss}%
+% Take care of texinfo commands likely to appear in an index entry.
+% (Must be a way to avoid doing expansion at all, and thus not have to
+% laboriously list every single command here.)
+\def\@{@}% will be @@ when we switch to @ as escape char.
+%\let\{ = \lbracecmd
+%\let\} = \rbracecmd
\def\_{{\realbackslash _}}%
\def\w{\realbackslash w }%
\def\bf{\realbackslash bf }%
-\def\rm{\realbackslash rm }%
+%\def\rm{\realbackslash rm }%
\def\sl{\realbackslash sl }%
\def\sf{\realbackslash sf}%
\def\tt{\realbackslash tt}%
\def\gtr{\realbackslash gtr}%
\def\less{\realbackslash less}%
\def\hat{\realbackslash hat}%
-\def\char{\realbackslash char}%
+%\def\char{\realbackslash char}%
\def\TeX{\realbackslash TeX}%
\def\dots{\realbackslash dots }%
\def\copyright{\realbackslash copyright }%
\def\tclose##1{\realbackslash tclose {##1}}%
\def\code##1{\realbackslash code {##1}}%
+\def\dotless##1{\realbackslash dotless {##1}}%
\def\samp##1{\realbackslash samp {##1}}%
-\def\t##1{\realbackslash r {##1}}%
+\def\,##1{\realbackslash ,{##1}}%
+\def\t##1{\realbackslash t {##1}}%
\def\r##1{\realbackslash r {##1}}%
\def\i##1{\realbackslash i {##1}}%
\def\b##1{\realbackslash b {##1}}%
\def\file##1{\realbackslash file {##1}}%
\def\var##1{\realbackslash var {##1}}%
\def\kbd##1{\realbackslash kbd {##1}}%
+\def\dfn##1{\realbackslash dfn {##1}}%
+\def\emph##1{\realbackslash emph {##1}}%
+\unsepspaces
}
+% If an index command is used in an @example environment, any spaces
+% therein should become regular spaces in the raw index file, not the
+% expansion of \tie (\\leavevmode \penalty \@M \ ).
+{\obeyspaces
+ \gdef\unsepspaces{\obeyspaces\let =\space}}
+
% \indexnofonts no-ops all font-change commands.
% This is used when outputting the strings to sort the index by.
\def\indexdummyfont#1{#1}
\def\indexdummydots{...}
\def\indexnofonts{%
+% Just ignore accents.
+\let\,=\indexdummyfont
+\let\"=\indexdummyfont
+\let\`=\indexdummyfont
+\let\'=\indexdummyfont
+\let\^=\indexdummyfont
+\let\~=\indexdummyfont
+\let\==\indexdummyfont
+\let\b=\indexdummyfont
+\let\c=\indexdummyfont
+\let\d=\indexdummyfont
+\let\u=\indexdummyfont
+\let\v=\indexdummyfont
+\let\H=\indexdummyfont
+\let\dotless=\indexdummyfont
+% Take care of the plain tex special European modified letters.
+\def\oe{oe}%
+\def\ae{ae}%
+\def\aa{aa}%
+\def\OE{OE}%
+\def\AE{AE}%
+\def\AA{AA}%
+\def\o{o}%
+\def\O{O}%
+\def\l{l}%
+\def\L{L}%
+\def\ss{ss}%
\let\w=\indexdummyfont
\let\t=\indexdummyfont
\let\r=\indexdummyfont
\let\var=\indexdummyfont
\let\TeX=\indexdummytex
\let\dots=\indexdummydots
+\def\@{@}%
}
% To define \realbackslash, we must make \ not be an escape.
\let\indexbackslash=0 %overridden during \printindex.
+\let\SETmarginindex=\relax %initialize!
+% workhorse for all \fooindexes
+% #1 is name of index, #2 is stuff to put there
\def\doind #1#2{%
-{\count10=\lastpenalty %
-{\indexdummies % Must do this here, since \bf, etc expand at this stage
-\escapechar=`\\%
-{\let\folio=0% Expand all macros now EXCEPT \folio
-\def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
-% so it will be output as is; and it will print as backslash in the indx.
-%
-% Now process the index-string once, with all font commands turned off,
-% to get the string to sort the index by.
-{\indexnofonts
-\xdef\temp1{#2}%
-}%
-% Now produce the complete index entry. We process the index-string again,
-% this time with font commands expanded, to get what to print in the index.
-\edef\temp{%
-\write \csname#1indfile\endcsname{%
-\realbackslash entry {\temp1}{\folio}{#2}}}%
-\temp }%
-}\penalty\count10}}
+ % Put the index entry in the margin if desired.
+ \ifx\SETmarginindex\relax\else
+ \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
+ \fi
+ {%
+ \count255=\lastpenalty
+ {%
+ \indexdummies % Must do this here, since \bf, etc expand at this stage
+ \escapechar=`\\
+ {%
+ \let\folio=0 % We will expand all macros now EXCEPT \folio.
+ \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
+ % so it will be output as is; and it will print as backslash.
+ %
+ % First process the index-string with all font commands turned off
+ % to get the string to sort by.
+ {\indexnofonts \xdef\indexsorttmp{#2}}%
+ %
+ % Now produce the complete index entry, with both the sort key and the
+ % original text, including any font commands.
+ \toks0 = {#2}%
+ \edef\temp{%
+ \write\csname#1indfile\endcsname{%
+ \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
+ }%
+ \temp
+ }%
+ }%
+ \penalty\count255
+ }%
+}
\def\dosubind #1#2#3{%
{\count10=\lastpenalty %
% \secondary {subtopic}{pagelist}
% for each subtopic.
-% Define the user-accessible indexing commands
+% Define the user-accessible indexing commands
% @findex, @vindex, @kindex, @cindex.
\def\findex {\fnindex}
\def\printindex{\parsearg\doprintindex}
-\def\doprintindex#1{\tex %
-\dobreak \chapheadingskip {10000}
-\catcode`\%=\other\catcode`\&=\other\catcode`\#=\other
-\catcode`\$=\other\catcode`\_=\other
-\catcode`\~=\other
-% The following don't help, since the chars were translated
-% when the raw index was written, and their fonts were discarded
-% due to \indexnofonts.
-%\catcode`\"=\active
-%\catcode`\^=\active
-%\catcode`\_=\active
-%\catcode`\|=\active
-%\catcode`\<=\active
-%\catcode`\>=\active
-\def\indexbackslash{\rawbackslashxx}
-\indexfonts\rm \tolerance=9500 \advance\baselineskip -1pt
-\begindoublecolumns
-\openin 1 \jobname.#1s
-\ifeof 1
-% \enddoublecolumns gets confused if there is no text in the index,
-% and it loses the chapter title and the aux file entries for the index.
-% The easiest way to prevent this problem is to make sure there is some text.
-(Index is empty)
-\else \closein 1 \input \jobname.#1s
-\fi
-\enddoublecolumns
-\Etex}
+\def\doprintindex#1{\begingroup
+ \dobreak \chapheadingskip{10000}%
+ %
+ \indexfonts \rm
+ \tolerance = 9500
+ \indexbreaks
+ \def\indexbackslash{\rawbackslashxx}%
+ % Index files are almost Texinfo source, but we use \ as the escape
+ % character. It would be better to use @, but that's too big a change
+ % to make right now.
+ \catcode`\\ = 0
+ \catcode`\@ = 11
+ \escapechar = `\\
+ \begindoublecolumns
+ %
+ % See if the index file exists and is nonempty.
+ \openin 1 \jobname.#1s
+ \ifeof 1
+ % \enddoublecolumns gets confused if there is no text in the index,
+ % and it loses the chapter title and the aux file entries for the
+ % index. The easiest way to prevent this problem is to make sure
+ % there is some text.
+ (Index is nonexistent)
+ \else
+ %
+ % If the index file exists but is empty, then \openin leaves \ifeof
+ % false. We have to make TeX try to read something from the file, so
+ % it can discover if there is anything in it.
+ \read 1 to \temp
+ \ifeof 1
+ (Index is empty)
+ \else
+ \input \jobname.#1s
+ \fi
+ \fi
+ \closein 1
+ \enddoublecolumns
+\endgroup}
% These macros are used by the sorted index file itself.
% Change them to control the appearance of the index.
% \balancecolumns gets confused if there is any shrink.
\newskip\initialskipamount \initialskipamount 12pt plus4pt
-\outer\def\initial #1{%
+\def\initial #1{%
{\let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
\ifdim\lastskip<\initialskipamount
\removelastskip \penalty-200 \vskip \initialskipamount\fi
\line{\secbf#1\hfill}\kern 2pt\penalty10000}}
-\outer\def\entry #1#2{
-{\parfillskip=0in \parskip=0in \parindent=0in
-\hangindent=1in \hangafter=1%
-\noindent\hbox{#1}\indexdotfill #2\par
-}}
+% This typesets a paragraph consisting of #1, dot leaders, and then #2
+% flush to the right margin. It is used for index and table of contents
+% entries. The paragraph is indented by \leftskip.
+%
+\def\entry #1#2{\begingroup
+ %
+ % Start a new paragraph if necessary, so our assignments below can't
+ % affect previous text.
+ \par
+ %
+ % Do not fill out the last line with white space.
+ \parfillskip = 0in
+ %
+ % No extra space above this paragraph.
+ \parskip = 0in
+ %
+ % Do not prefer a separate line ending with a hyphen to fewer lines.
+ \finalhyphendemerits = 0
+ %
+ % \hangindent is only relevant when the entry text and page number
+ % don't both fit on one line. In that case, bob suggests starting the
+ % dots pretty far over on the line. Unfortunately, a large
+ % indentation looks wrong when the entry text itself is broken across
+ % lines. So we use a small indentation and put up with long leaders.
+ %
+ % \hangafter is reset to 1 (which is the value we want) at the start
+ % of each paragraph, so we need not do anything with that.
+ \hangindent=2em
+ %
+ % When the entry text needs to be broken, just fill out the first line
+ % with blank space.
+ \rightskip = 0pt plus1fil
+ %
+ % Start a ``paragraph'' for the index entry so the line breaking
+ % parameters we've set above will have an effect.
+ \noindent
+ %
+ % Insert the text of the index entry. TeX will do line-breaking on it.
+ #1%
+ % The following is kludged to not output a line of dots in the index if
+ % there are no page numbers. The next person who breaks this will be
+ % cursed by a Unix daemon.
+ \def\tempa{{\rm }}%
+ \def\tempb{#2}%
+ \edef\tempc{\tempa}%
+ \edef\tempd{\tempb}%
+ \ifx\tempc\tempd\ \else%
+ %
+ % If we must, put the page number on a line of its own, and fill out
+ % this line with blank space. (The \hfil is overwhelmed with the
+ % fill leaders glue in \indexdotfill if the page number does fit.)
+ \hfil\penalty50
+ \null\nobreak\indexdotfill % Have leaders before the page number.
+ %
+ % The `\ ' here is removed by the implicit \unskip that TeX does as
+ % part of (the primitive) \par. Without it, a spurious underfull
+ % \hbox ensues.
+ \ #2% The page number ends the paragraph.
+ \fi%
+ \par
+\endgroup}
% Like \dotfill except takes at least 1 em.
\def\indexdotfill{\cleaders
- \hbox{$\mathsurround=0pt \mkern1.5mu . \mkern1.5mu$}\hskip 1em plus 1fill}
+ \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
\def\primary #1{\line{#1\hfil}}
\noindent\hskip\secondaryindent\hbox{#1}\indexdotfill #2\par
}}
-%% Define two-column mode, which is used in indexes.
-%% Adapted from the TeXBook, page 416
-\catcode `\@=11
+% Define two-column mode, which we use to typeset indexes.
+% Adapted from the TeXbook, page 416, which is to say,
+% the manmac.tex format used to print the TeXbook itself.
+\catcode`\@=11
\newbox\partialpage
-
-\newdimen\doublecolumnhsize \doublecolumnhsize = 3.11in
-\newdimen\doublecolumnvsize \doublecolumnvsize = 19.1in
-\newdimen\availdimen@
-
-\def\begindoublecolumns{\begingroup
- \output={\global\setbox\partialpage=
- \vbox{\unvbox255\kern -\topskip \kern \baselineskip}}\eject
+\newdimen\doublecolumnhsize
+
+\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
+ % Grab any single-column material above us.
+ \output = {\global\setbox\partialpage
+ =\vbox{\unvbox255\kern -\topskip \kern \baselineskip}}%
+ \eject
+ %
+ % Now switch to the double-column output routine.
\output={\doublecolumnout}%
- \hsize=\doublecolumnhsize \vsize=\doublecolumnvsize}
-\def\enddoublecolumns{\output={\balancecolumns}\eject
- \endgroup \pagegoal=\vsize}
-
-\def\doublecolumnout{\splittopskip=\topskip \splitmaxdepth=\maxdepth
+ %
+ % Change the page size parameters. We could do this once outside this
+ % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
+ % format, but then we repeat the same computation. Repeating a couple
+ % of assignments once per index is clearly meaningless for the
+ % execution time, so we may as well do it once.
+ %
+ % First we halve the line length, less a little for the gutter between
+ % the columns. We compute the gutter based on the line length, so it
+ % changes automatically with the paper format. The magic constant
+ % below is chosen so that the gutter has the same value (well, +- <
+ % 1pt) as it did when we hard-coded it.
+ %
+ % We put the result in a separate register, \doublecolumhsize, so we
+ % can restore it in \pagesofar, after \hsize itself has (potentially)
+ % been clobbered.
+ %
+ \doublecolumnhsize = \hsize
+ \advance\doublecolumnhsize by -.04154\hsize
+ \divide\doublecolumnhsize by 2
+ \hsize = \doublecolumnhsize
+ %
+ % Double the \vsize as well. (We don't need a separate register here,
+ % since nobody clobbers \vsize.)
+ \vsize = 2\vsize
+}
+\def\doublecolumnout{%
+ \splittopskip=\topskip \splitmaxdepth=\maxdepth
+ % Get the available space for the double columns -- the normal
+ % (undoubled) page height minus any material left over from the
+ % previous page.
\dimen@=\pageheight \advance\dimen@ by-\ht\partialpage
+ % box0 will be the left-hand column, box1 the right.
\setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
- \onepageout\pagesofar \unvbox255 \penalty\outputpenalty}
-\def\pagesofar{\unvbox\partialpage %
- \hsize=\doublecolumnhsize % have to restore this since output routine
-% changes it to set cropmarks (P. A. MacKay, 12 Nov. 1986)
- \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}}
+ \onepageout\pagesofar
+ \unvbox255 \penalty\outputpenalty
+}
+\def\pagesofar{%
+ % The contents of the output page -- any previous material,
+ % followed by the two boxes we just split.
+ \unvbox\partialpage
+ \hsize = \doublecolumnhsize
+ \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}%
+}
+\def\enddoublecolumns{%
+ \output={\balancecolumns}\eject % split what we have
+ \endgroup
+ % Back to normal single-column typesetting, but take account of the
+ % fact that we just accumulated some stuff on the output page.
+ \pagegoal=\vsize
+}
\def\balancecolumns{%
-% Unset the glue.
- \setbox255=\vbox{\unvbox255}
- \dimen@=\ht255
- \advance\dimen@ by\topskip \advance\dimen@ by-\baselineskip
- \divide\dimen@ by2
- \availdimen@=\pageheight \advance\availdimen@ by-\ht\partialpage
-% If the remaining data is too big for one page,
-% output one page normally, then work with what remains.
- \ifdim \dimen@>\availdimen@
- {
- \splittopskip=\topskip \splitmaxdepth=\maxdepth
- \dimen@=\pageheight \advance\dimen@ by-\ht\partialpage
- \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
- \onepageout\pagesofar
- }
-% Recompute size of what remains, in case we just output some of it.
- \dimen@=\ht255
- \advance\dimen@ by\topskip \advance\dimen@ by-\baselineskip
- \divide\dimen@ by2
- \fi
- \setbox0=\vbox{\unvbox255}
- \splittopskip=\topskip
+ % Called on the last page of the double column material.
+ \setbox0=\vbox{\unvbox255}%
+ \dimen@ = \ht0
+ \advance\dimen@ by \topskip
+ \advance\dimen@ by-\baselineskip
+ \divide\dimen@ by 2
+ \splittopskip = \topskip
+ % Loop until we get a decent breakpoint.
{\vbadness=10000 \loop \global\setbox3=\copy0
\global\setbox1=\vsplit3 to\dimen@
- \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt \repeat}
- \setbox0=\vbox to\dimen@{\unvbox1} \setbox2=\vbox to\dimen@{\unvbox3}
- \pagesofar}
-
+ \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt \repeat}%
+ \setbox0=\vbox to\dimen@{\unvbox1}%
+ \setbox2=\vbox to\dimen@{\unvbox3}%
+ \pagesofar
+}
\catcode `\@=\other
+
+
\message{sectioning,}
% Define chapters, sections, etc.
\newcount \chapno
-\newcount \secno
-\newcount \subsecno
-\newcount \subsubsecno
+\newcount \secno \secno=0
+\newcount \subsecno \subsecno=0
+\newcount \subsubsecno \subsubsecno=0
% This counter is funny since it counts through charcodes of letters A, B, ...
\newcount \appendixno \appendixno = `\@
\def\chapternofonts{%
\let\rawbackslash=\relax%
\let\frenchspacing=\relax%
+\def\result{\realbackslash result}
+\def\equiv{\realbackslash equiv}
+\def\expansion{\realbackslash expansion}
+\def\print{\realbackslash print}
\def\TeX{\realbackslash TeX}
\def\dots{\realbackslash dots}
\def\copyright{\realbackslash copyright}
\def\dfn##1{\realbackslash dfn {##1}}
}
-\outer\def\chapter{\parsearg\chapterzzz}
+\newcount\absseclevel % used to calculate proper heading level
+\newcount\secbase\secbase=0 % @raise/lowersections modify this count
+
+% @raisesections: treat @section as chapter, @subsection as section, etc.
+\def\raisesections{\global\advance\secbase by -1}
+\let\up=\raisesections % original BFox name
+
+% @lowersections: treat @chapter as section, @section as subsection, etc.
+\def\lowersections{\global\advance\secbase by 1}
+\let\down=\lowersections % original BFox name
+
+% Choose a numbered-heading macro
+% #1 is heading level if unmodified by @raisesections or @lowersections
+% #2 is text for heading
+\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
+\ifcase\absseclevel
+ \chapterzzz{#2}
+\or
+ \seczzz{#2}
+\or
+ \numberedsubseczzz{#2}
+\or
+ \numberedsubsubseczzz{#2}
+\else
+ \ifnum \absseclevel<0
+ \chapterzzz{#2}
+ \else
+ \numberedsubsubseczzz{#2}
+ \fi
+\fi
+}
+
+% like \numhead, but chooses appendix heading levels
+\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
+\ifcase\absseclevel
+ \appendixzzz{#2}
+\or
+ \appendixsectionzzz{#2}
+\or
+ \appendixsubseczzz{#2}
+\or
+ \appendixsubsubseczzz{#2}
+\else
+ \ifnum \absseclevel<0
+ \appendixzzz{#2}
+ \else
+ \appendixsubsubseczzz{#2}
+ \fi
+\fi
+}
+
+% like \numhead, but chooses numberless heading levels
+\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
+\ifcase\absseclevel
+ \unnumberedzzz{#2}
+\or
+ \unnumberedseczzz{#2}
+\or
+ \unnumberedsubseczzz{#2}
+\or
+ \unnumberedsubsubseczzz{#2}
+\else
+ \ifnum \absseclevel<0
+ \unnumberedzzz{#2}
+ \else
+ \unnumberedsubsubseczzz{#2}
+ \fi
+\fi
+}
+
+
+\def\thischaptername{No Chapter Title}
+\outer\def\chapter{\parsearg\chapteryyy}
+\def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz
\def\chapterzzz #1{\seccheck{chapter}%
\secno=0 \subsecno=0 \subsubsecno=0
-\global\advance \chapno by 1 \message{Chapter \the\chapno}%
+\global\advance \chapno by 1 \message{\putwordChapter \the\chapno}%
\chapmacro {#1}{\the\chapno}%
\gdef\thissection{#1}%
\gdef\thischaptername{#1}%
% We don't substitute the actual chapter name into \thischapter
% because we don't want its macros evaluated now.
-\xdef\thischapter{Chapter \the\chapno: \noexpand\thischaptername}%
+\xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
{\chapternofonts%
\edef\temp{{\realbackslash chapentry {#1}{\the\chapno}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\donoderef %
-\global\let\section = \numberedsection
+\global\let\section = \numberedsec
+\global\let\subsection = \numberedsubsec
+\global\let\subsubsection = \numberedsubsubsec
}}
-\outer\def\appendix{\parsearg\appendixzzz}
+\outer\def\appendix{\parsearg\appendixyyy}
+\def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz
\def\appendixzzz #1{\seccheck{appendix}%
\secno=0 \subsecno=0 \subsubsecno=0
\global\advance \appendixno by 1 \message{Appendix \appendixletter}%
-\chapmacro {#1}{Appendix \appendixletter}%
+\chapmacro {#1}{\putwordAppendix{} \appendixletter}%
\gdef\thissection{#1}%
\gdef\thischaptername{#1}%
-\xdef\thischapter{Appendix \appendixletter: \noexpand\thischaptername}%
+\xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
{\chapternofonts%
-\edef\temp{{\realbackslash chapentry
- {#1}{Appendix \appendixletter}{\noexpand\folio}}}%
+\edef\temp{{\realbackslash chapentry
+ {#1}{\putwordAppendix{} \appendixletter}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\appendixnoderef %
\global\let\section = \appendixsec
+\global\let\subsection = \appendixsubsec
+\global\let\subsubsection = \appendixsubsubsec
}}
-\outer\def\top{\parsearg\unnumberedzzz}
-\outer\def\unnumbered{\parsearg\unnumberedzzz}
+% @centerchap is like @unnumbered, but the heading is centered.
+\outer\def\centerchap{\parsearg\centerchapyyy}
+\def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}}
+
+\outer\def\top{\parsearg\unnumberedyyy}
+\outer\def\unnumbered{\parsearg\unnumberedyyy}
+\def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
\def\unnumberedzzz #1{\seccheck{unnumbered}%
-\secno=0 \subsecno=0 \subsubsecno=0 \message{(#1)}
+\secno=0 \subsecno=0 \subsubsecno=0
+%
+% This used to be simply \message{#1}, but TeX fully expands the
+% argument to \message. Therefore, if #1 contained @-commands, TeX
+% expanded them. For example, in `@unnumbered The @cite{Book}', TeX
+% expanded @cite (which turns out to cause errors because \cite is meant
+% to be executed, not expanded).
+%
+% Anyway, we don't want the fully-expanded definition of @cite to appear
+% as a result of the \message, we just want `@cite' itself. We use
+% \the<toks register> to achieve this: TeX expands \the<toks> only once,
+% simply yielding the contents of the <toks register>.
+\toks0 = {#1}\message{(\the\toks0)}%
+%
\unnumbchapmacro {#1}%
\gdef\thischapter{#1}\gdef\thissection{#1}%
{\chapternofonts%
\write \contentsfile \temp %
\unnumbnoderef %
\global\let\section = \unnumberedsec
+\global\let\subsection = \unnumberedsubsec
+\global\let\subsubsection = \unnumberedsubsubsec
}}
-\outer\def\numberedsection{\parsearg\sectionzzz}
-\def\sectionzzz #1{\seccheck{section}%
+\outer\def\numberedsec{\parsearg\secyyy}
+\def\secyyy #1{\numhead1{#1}} % normally calls seczzz
+\def\seczzz #1{\seccheck{section}%
\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
\gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
{\chapternofonts%
\write \contentsfile \temp %
\donoderef %
\penalty 10000 %
-\global\let\subsection = \numberedsubsection
}}
-\outer\def\appendixsection{\parsearg\appendixsectionzzz}
-\outer\def\appendixsec{\parsearg\appendixsectionzzz}
+\outer\def\appendixsection{\parsearg\appendixsecyyy}
+\outer\def\appendixsec{\parsearg\appendixsecyyy}
+\def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz
\def\appendixsectionzzz #1{\seccheck{appendixsection}%
\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
\gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
\write \contentsfile \temp %
\appendixnoderef %
\penalty 10000 %
-\global\let\subsection = \appendixsubsec
}}
-\outer\def\unnumberedsec{\parsearg\unnumberedseczzz}
+\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
+\def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz
\def\unnumberedseczzz #1{\seccheck{unnumberedsec}%
\plainsecheading {#1}\gdef\thissection{#1}%
{\chapternofonts%
\write \contentsfile \temp %
\unnumbnoderef %
\penalty 10000 %
-\global\let\subsection = \unnumberedsubsec
}}
-\outer\def\numberedsubsection{\parsearg\subsectionzzz}
-\def\subsectionzzz #1{\seccheck{subsection}%
+\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
+\def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz
+\def\numberedsubseczzz #1{\seccheck{subsection}%
\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
\subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
{\chapternofonts%
\write \contentsfile \temp %
\donoderef %
\penalty 10000 %
-\global\let\subsubsection = \numberedsubsubsection
}}
-\outer\def\appendixsubsec{\parsearg\appendixsubseczzz}
+\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
+\def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz
\def\appendixsubseczzz #1{\seccheck{appendixsubsec}%
\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
\subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
\write \contentsfile \temp %
\appendixnoderef %
\penalty 10000 %
-\global\let\subsubsection = \appendixsubsubsec
}}
-\outer\def\unnumberedsubsec{\parsearg\unnumberedsubseczzz}
+\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
+\def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
\def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}%
-\plainsecheading {#1}\gdef\thissection{#1}%
+\plainsubsecheading {#1}\gdef\thissection{#1}%
{\chapternofonts%
\edef\temp{{\realbackslash unnumbsubsecentry{#1}{\noexpand\folio}}}%
\escapechar=`\\%
\write \contentsfile \temp %
\unnumbnoderef %
\penalty 10000 %
-\global\let\subsubsection = \unnumberedsubsubsec
}}
-\outer\def\numberedsubsubsection{\parsearg\subsubsectionzzz}
-\def\subsubsectionzzz #1{\seccheck{subsubsection}%
+\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
+\def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz
+\def\numberedsubsubseczzz #1{\seccheck{subsubsection}%
\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
\subsubsecheading {#1}
{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
\penalty 10000 %
}}
-\outer\def\appendixsubsubsec{\parsearg\appendixsubsubseczzz}
+\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
+\def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz
\def\appendixsubsubseczzz #1{\seccheck{appendixsubsubsec}%
\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
\subsubsecheading {#1}
\penalty 10000 %
}}
-\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
+\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
+\def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
\def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}%
-\plainsecheading {#1}\gdef\thissection{#1}%
+\plainsubsubsecheading {#1}\gdef\thissection{#1}%
{\chapternofonts%
\edef\temp{{\realbackslash unnumbsubsubsecentry{#1}{\noexpand\folio}}}%
\escapechar=`\\%
}}
% These are variants which are not "outer", so they can appear in @ifinfo.
+% Actually, they should now be obsolete; ordinary section commands should work.
\def\infotop{\parsearg\unnumberedzzz}
\def\infounnumbered{\parsearg\unnumberedzzz}
\def\infounnumberedsec{\parsearg\unnumberedseczzz}
\def\infosubsection{\parsearg\subsectionzzz}
\def\infosubsubsection{\parsearg\subsubsectionzzz}
+% These macros control what the section commands do, according
+% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
+% Define them by default for a numbered chapter.
+\global\let\section = \numberedsec
+\global\let\subsection = \numberedsubsec
+\global\let\subsubsection = \numberedsubsubsec
+
% Define @majorheading, @heading and @subheading
+% NOTE on use of \vbox for chapter headings, section headings, and
+% such:
+% 1) We use \vbox rather than the earlier \line to permit
+% overlong headings to fold.
+% 2) \hyphenpenalty is set to 10000 because hyphenation in a
+% heading is obnoxious; this forbids it.
+% 3) Likewise, headings look best if no \parindent is used, and
+% if justification is not attempted. Hence \raggedright.
+
+
\def\majorheading{\parsearg\majorheadingzzz}
\def\majorheadingzzz #1{%
{\advance\chapheadingskip by 10pt \chapbreak }%
-{\chapfonts \line{\rm #1\hfill}}\bigskip \par\penalty 200}
+{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+ \parindent=0pt\raggedright
+ \rm #1\hfill}}\bigskip \par\penalty 200}
\def\chapheading{\parsearg\chapheadingzzz}
\def\chapheadingzzz #1{\chapbreak %
-{\chapfonts \line{\rm #1\hfill}}\bigskip \par\penalty 200}
-
-\def\heading{\parsearg\secheadingi}
+{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+ \parindent=0pt\raggedright
+ \rm #1\hfill}}\bigskip \par\penalty 200}
-\def\subheading{\parsearg\subsecheadingi}
-
-\def\subsubheading{\parsearg\subsubsecheadingi}
+% @heading, @subheading, @subsubheading.
+\def\heading{\parsearg\plainsecheading}
+\def\subheading{\parsearg\plainsubsecheading}
+\def\subsubheading{\parsearg\plainsubsubsecheading}
% These macros generate a chapter, section, etc. heading only
% (including whitespace, linebreaking, etc. around it),
%%% Define plain chapter starts, and page on/off switching for it
% Parameter controlling skip before chapter headings (if needed)
-\newskip \chapheadingskip \chapheadingskip = 30pt plus 8pt minus 4pt
+\newskip\chapheadingskip
\def\chapbreak{\dobreak \chapheadingskip {-4000}}
\def\chappager{\par\vfill\supereject}
\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
\def\CHAPPAGoff{
+\global\let\contentsalignmacro = \chappager
\global\let\pchapsepmacro=\chapbreak
\global\let\pagealignmacro=\chappager}
\def\CHAPPAGon{
+\global\let\contentsalignmacro = \chappager
\global\let\pchapsepmacro=\chappager
\global\let\pagealignmacro=\chappager
\global\def\HEADINGSon{\HEADINGSsingle}}
\def\CHAPPAGodd{
+\global\let\contentsalignmacro = \chapoddpage
\global\let\pchapsepmacro=\chapoddpage
\global\let\pagealignmacro=\chapoddpage
\global\def\HEADINGSon{\HEADINGSdouble}}
\def\CHAPFplain{
\global\let\chapmacro=\chfplain
-\global\let\unnumbchapmacro=\unnchfplain}
+\global\let\unnumbchapmacro=\unnchfplain
+\global\let\centerchapmacro=\centerchfplain}
-\def\chfplain #1#2{%
+% Plain chapter opening.
+% #1 is the text, #2 the chapter number or empty if unnumbered.
+\def\chfplain#1#2{%
\pchapsepmacro
{%
- \chapfonts
- \leftline{\rm #2\enspace #1}%
+ \chapfonts \rm
+ \def\chapnum{#2}%
+ \setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}%
+ \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+ \hangindent = \wd0 \centerparametersmaybe
+ \unhbox0 #1\par}%
}%
- \bigskip
- \penalty5000
+ \nobreak\bigskip % no page break after a chapter title
+ \nobreak
}
-\def\unnchfplain #1{%
-\pchapsepmacro %
-{\chapfonts \line{\rm #1\hfill}}\bigskip \par\penalty 10000 %
-}
+% Plain opening for unnumbered.
+\def\unnchfplain#1{\chfplain{#1}{}}
+
+% @centerchap -- centered and unnumbered.
+\let\centerparametersmaybe = \relax
+\def\centerchfplain#1{{%
+ \def\centerparametersmaybe{%
+ \advance\rightskip by 3\rightskip
+ \leftskip = \rightskip
+ \parfillskip = 0pt
+ }%
+ \chfplain{#1}{}%
+}}
+
\CHAPFplain % The default
\def\unnchfopen #1{%
-\chapoddpage {\chapfonts \line{\rm #1\hfill}}\bigskip \par\penalty 10000 %
+\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+ \parindent=0pt\raggedright
+ \rm #1\hfill}}\bigskip \par\penalty 10000 %
}
\def\chfopen #1#2{\chapoddpage {\chapfonts
\par\penalty 5000 %
}
+\def\centerchfopen #1{%
+\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+ \parindent=0pt
+ \hfill {\rm #1}\hfill}}\bigskip \par\penalty 10000 %
+}
+
\def\CHAPFopen{
\global\let\chapmacro=\chfopen
-\global\let\unnumbchapmacro=\unnchfopen}
+\global\let\unnumbchapmacro=\unnchfopen
+\global\let\centerchapmacro=\centerchfopen}
-% Parameter controlling skip before section headings.
-\newskip \subsecheadingskip \subsecheadingskip = 17pt plus 8pt minus 4pt
-\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
-
-\newskip \secheadingskip \secheadingskip = 21pt plus 8pt minus 4pt
+% Section titles.
+\newskip\secheadingskip
\def\secheadingbreak{\dobreak \secheadingskip {-1000}}
+\def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}}
+\def\plainsecheading#1{\sectionheading{sec}{}{#1}}
+% Subsection titles.
+\newskip \subsecheadingskip
+\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
+\def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}}
+\def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}}
-% Section fonts are the base font at magstep2, which produces
-% a size a bit more than 14 points in the default situation.
-
-\def\secheading #1#2#3{\secheadingi {#2.#3\enspace #1}}
-\def\plainsecheading #1{\secheadingi {#1}}
-\def\secheadingi #1{{\advance \secheadingskip by \parskip %
-\secheadingbreak}%
-{\secfonts \line{\rm #1\hfill}}%
-\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000 }
-
-
-% Subsection fonts are the base font at magstep1,
-% which produces a size of 12 points.
+% Subsubsection titles.
+\let\subsubsecheadingskip = \subsecheadingskip
+\let\subsubsecheadingbreak = \subsecheadingbreak
+\def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}}
+\def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}}
-\def\subsecheading #1#2#3#4{\subsecheadingi {#2.#3.#4\enspace #1}}
-\def\subsecheadingi #1{{\advance \subsecheadingskip by \parskip %
-\subsecheadingbreak}%
-{\subsecfonts \line{\rm #1\hfill}}%
-\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000 }
-\def\subsubsecfonts{\subsecfonts} % Maybe this should change:
- % Perhaps make sssec fonts scaled
- % magstep half
-\def\subsubsecheading #1#2#3#4#5{\subsubsecheadingi {#2.#3.#4.#5\enspace #1}}
-\def\subsubsecheadingi #1{{\advance \subsecheadingskip by \parskip %
-\subsecheadingbreak}%
-{\subsubsecfonts \line{\rm #1\hfill}}%
-\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000}
+% Print any size section title.
+%
+% #1 is the section type (sec/subsec/subsubsec), #2 is the section
+% number (maybe empty), #3 the text.
+\def\sectionheading#1#2#3{%
+ {%
+ \expandafter\advance\csname #1headingskip\endcsname by \parskip
+ \csname #1headingbreak\endcsname
+ }%
+ {%
+ % Switch to the right set of fonts.
+ \csname #1fonts\endcsname \rm
+ %
+ % Only insert the separating space if we have a section number.
+ \def\secnum{#2}%
+ \setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}%
+ %
+ \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+ \hangindent = \wd0 % zero if no section number
+ \unhbox0 #3}%
+ }%
+ \ifdim\parskip<10pt \nobreak\kern10pt\nobreak\kern-\parskip\fi \nobreak
+}
\message{toc printing,}
-
% Finish up the main text and prepare to read what we've written
% to \contentsfile.
+\newskip\contentsrightmargin \contentsrightmargin=1in
\def\startcontents#1{%
+ % If @setchapternewpage on, and @headings double, the contents should
+ % start on an odd page, unlike chapters. Thus, we maintain
+ % \contentsalignmacro in parallel with \pagealignmacro.
+ % From: Torbjorn Granlund <tege@matematik.su.se>
+ \contentsalignmacro
+ \immediate\closeout \contentsfile
\ifnum \pageno>0
- \pagealignmacro
- \immediate\closeout \contentsfile
- \pageno = -1 % Request roman numbered pages.
+ \pageno = -1 % Request roman numbered pages.
\fi
- % Don't need to put `Contents' or `Short Contents' in the headline.
+ % Don't need to put `Contents' or `Short Contents' in the headline.
% It is abundantly clear what they are.
\unnumbchapmacro{#1}\def\thischapter{}%
- \begingroup % Set up to handle contents files properly.
+ \begingroup % Set up to handle contents files properly.
\catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
+ \catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
\raggedbottom % Worry more about breakpoints than the bottom.
- \advance\hsize by -1in % Don't use the full line length.
+ \advance\hsize by -\contentsrightmargin % Don't use the full line length.
}
-
+
% Normal (long) toc.
\outer\def\contents{%
- \startcontents{Table of Contents}%
+ \startcontents{\putwordTableofContents}%
\input \jobname.toc
\endgroup
\vfill \eject
% And just the chapters.
\outer\def\summarycontents{%
- \startcontents{Short Contents}%
+ \startcontents{\putwordShortContents}%
%
\let\chapentry = \shortchapentry
\let\unnumbchapentry = \shortunnumberedentry
\secfonts
\let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl
\rm
+ \hyphenpenalty = 10000
\advance\baselineskip by 1pt % Open it up a little.
\def\secentry ##1##2##3##4{}
\def\unnumbsecentry ##1##2{}
% Chapter-level things, for both the long and short contents.
\def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}}
+
+% See comments in \dochapentry re vbox and related settings
\def\shortchapentry#1#2#3{%
- \line{{#2\labelspace #1}\dotfill\doshortpageno{#3}}%
+ \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno{#3}}%
}
-\def\unnumbchapentry#1#2{\dochapentry{#1}{#2}}
-\def\shortunnumberedentry#1#2{%
- \line{#1\dotfill\doshortpageno{#2}}%
+% Typeset the label for a chapter or appendix for the short contents.
+% The arg is, e.g. `Appendix A' for an appendix, or `3' for a chapter.
+% We could simplify the code here by writing out an \appendixentry
+% command in the toc file for appendices, instead of using \chapentry
+% for both, but it doesn't seem worth it.
+\setbox0 = \hbox{\shortcontrm \putwordAppendix }
+\newdimen\shortappendixwidth \shortappendixwidth = \wd0
+
+\def\shortchaplabel#1{%
+ % We typeset #1 in a box of constant width, regardless of the text of
+ % #1, so the chapter titles will come out aligned.
+ \setbox0 = \hbox{#1}%
+ \dimen0 = \ifdim\wd0 > \shortappendixwidth \shortappendixwidth \else 0pt \fi
+ %
+ % This space should be plenty, since a single number is .5em, and the
+ % widest letter (M) is 1em, at least in the Computer Modern fonts.
+ % (This space doesn't include the extra space that gets added after
+ % the label; that gets put in by \shortchapentry above.)
+ \advance\dimen0 by 1.1em
+ \hbox to \dimen0{#1\hfil}%
}
+\def\unnumbchapentry#1#2{\dochapentry{#1}{#2}}
+\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno{#2}}}
+
% Sections.
\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}}
\def\unnumbsecentry#1#2{\dosecentry{#1}{#2}}
\dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}}
\def\unnumbsubsubsecentry#1#2{\dosubsubsecentry{#1}{#2}}
-
% This parameter controls the indentation of the various levels.
\newdimen\tocindent \tocindent = 3pc
-% Now for the actual typesetting. In all these, #1 is the text and #2 is the
+% Now for the actual typesetting. In all these, #1 is the text and #2 is the
% page number.
%
-% If the toc has to be broken over pages, we would want to be at chapters
+% If the toc has to be broken over pages, we want it to be at chapters
% if at all possible; hence the \penalty.
\def\dochapentry#1#2{%
- \penalty-300 \vskip\baselineskip
- \line{\chapentryfonts #1\dotfill \dopageno{#2}}%
- \nobreak\vskip .25\baselineskip
+ \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
+ \begingroup
+ \chapentryfonts
+ \tocentry{#1}{\dopageno{#2}}%
+ \endgroup
+ \nobreak\vskip .25\baselineskip plus.1\baselineskip
}
-\def\dosecentry#1#2{%
- \line{\secentryfonts \hskip\tocindent #1\dotfill \dopageno{#2}}%
-}
+\def\dosecentry#1#2{\begingroup
+ \secentryfonts \leftskip=\tocindent
+ \tocentry{#1}{\dopageno{#2}}%
+\endgroup}
-\def\dosubsecentry#1#2{%
- \line{\subsecentryfonts \hskip2\tocindent #1\dotfill \dopageno{#2}}%
-}
+\def\dosubsecentry#1#2{\begingroup
+ \subsecentryfonts \leftskip=2\tocindent
+ \tocentry{#1}{\dopageno{#2}}%
+\endgroup}
-\def\dosubsubsecentry#1#2{%
- \line{\subsubsecentryfonts \hskip3\tocindent #1\dotfill \dopageno{#2}}%
-}
+\def\dosubsubsecentry#1#2{\begingroup
+ \subsubsecentryfonts \leftskip=3\tocindent
+ \tocentry{#1}{\dopageno{#2}}%
+\endgroup}
+
+% Final typesetting of a toc entry; we use the same \entry macro as for
+% the index entries, but we want to suppress hyphenation here. (We
+% can't do that in the \entry macro, since index entries might consist
+% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
+%
+% \turnoffactive is for the sake of @" used for umlauts.
+\def\tocentry#1#2{\begingroup
+ \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
+ \entry{\turnoffactive #1}{\turnoffactive #2}%
+\endgroup}
% Space between chapter (or whatever) number and the title.
\def\labelspace{\hskip1em \relax}
\message{environments,}
-% Since these characters are used in examples, it should be an even number of
+% Since these characters are used in examples, it should be an even number of
% \tt widths. Each \tt character is 1en, so two makes it 1em.
% Furthermore, these definitions must come after we define our fonts.
\newbox\dblarrowbox \newbox\longdblarrowbox
\newbox\pushcharbox \newbox\bullbox
\newbox\equivbox \newbox\errorbox
-\let\ptexequiv = \equiv
-
-{\tentt
-\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil}
-\global\setbox\longdblarrowbox = \hbox to 1em{\hfil$\mapsto$\hfil}
-\global\setbox\pushcharbox = \hbox to 1em{\hfil$\dashv$\hfil}
-\global\setbox\equivbox = \hbox to 1em{\hfil$\ptexequiv$\hfil}
+%{\tentt
+%\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil}
+%\global\setbox\longdblarrowbox = \hbox to 1em{\hfil$\mapsto$\hfil}
+%\global\setbox\pushcharbox = \hbox to 1em{\hfil$\dashv$\hfil}
+%\global\setbox\equivbox = \hbox to 1em{\hfil$\ptexequiv$\hfil}
% Adapted from the manmac format (p.420 of TeXbook)
-\global\setbox\bullbox = \hbox to 1em{\kern.15em\vrule height .75ex width .85ex
- depth .1ex\hfil}
-}
+%\global\setbox\bullbox = \hbox to 1em{\kern.15em\vrule height .75ex width .85ex
+% depth .1ex\hfil}
+%}
+% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
\def\point{$\star$}
-
-\def\result{\leavevmode\raise.15ex\copy\dblarrowbox}
-\def\expansion{\leavevmode\raise.1ex\copy\longdblarrowbox}
-\def\print{\leavevmode\lower.1ex\copy\pushcharbox}
-
-\def\equiv{\leavevmode\lower.1ex\copy\equivbox}
-
-% Does anyone really want this?
-% \def\bull{\leavevmode\copy\bullbox}
+\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
+\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
+\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
+\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
% Adapted from the TeXbook's \boxit.
{\tentt \global\dimen0 = 3em}% Width of the box.
\catcode `\$=3 \catcode `\&=4 \catcode `\#=6
\catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie
\catcode `\%=14
-\catcode 43=12
+\catcode 43=12 % plus
\catcode`\"=12
\catcode`\==12
\catcode`\|=12
\catcode`\>=12
\escapechar=`\\
%
+\let\,=\ptexcomma
+\let\~=\ptextilde
\let\{=\ptexlbrace
\let\}=\ptexrbrace
\let\.=\ptexdot
\let\*=\ptexstar
\let\dots=\ptexdots
+\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}
+\def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}
\def\@{@}%
\let\bullet=\ptexbullet
-\let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext \let\l=\ptexl
-\let\L=\ptexL
+\let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext
%
\let\Etex=\endgroup}
% Amount to narrow the margins by for @lisp.
\newskip\lispnarrowing \lispnarrowing=0.4in
-% This is the definition that ^M gets inside @lisp
-% phr: changed space to \null, to avoid overfull hbox problems.
-{\obeyspaces%
-\gdef\lisppar{\null\endgraf}}
+% This is the definition that ^^M gets inside @lisp, @example, and other
+% such environments. \null is better than a space, since it doesn't
+% have any width.
+\def\lisppar{\null\endgraf}
-% Cause \obeyspaces to make each Space cause a word-separation
-% rather than the default which is that it acts punctuation.
-% This is because space in tt font looks funny.
+% Make each space character in the input produce a normal interword
+% space in the output. Don't allow a line break at this space, as this
+% is used only in environments like @example, where each line of input
+% should produce a line of output anyway.
+%
{\obeyspaces %
-\gdef\sepspaces{\def {\ }}}
-
-\newskip\aboveenvskipamount \aboveenvskipamount= 0pt
-\def\aboveenvbreak{{\advance\aboveenvskipamount by \parskip
-\endgraf \ifdim\lastskip<\aboveenvskipamount
-\removelastskip \penalty-50 \vskip\aboveenvskipamount \fi}}
-
-\def\afterenvbreak{\endgraf \ifdim\lastskip<\aboveenvskipamount
-\removelastskip \penalty-50 \vskip\aboveenvskipamount \fi}
-
-\def\lisp{\aboveenvbreak
-\begingroup\inENV % This group ends at the end of the @lisp body
-\hfuzz=12truept % Don't be fussy
-% Make spaces be word-separators rather than space tokens.
-\sepspaces %
-% Single space lines
-\singlespace %
-% The following causes blank lines not to be ignored
-% by adding a space to the end of each line.
-\let\par=\lisppar
-\def\Elisp{\endgroup\afterenvbreak}%
-\parskip=0pt
-\advance \leftskip by \lispnarrowing
-\parindent=0pt
-\let\exdent=\internalexdent
-\obeyspaces \obeylines \tt \rawbackslash
-\def\next##1{}\next}
-
-
-\let\example=\lisp
-\def\Eexample{\Elisp}
-
-\let\smallexample=\lisp
-\def\Esmallexample{\Elisp}
-
-% Macro for 9 pt. examples, necessary to print with 5" lines.
-% From Pavel@xerox. This is not really used unless the
-% @smallbook command is given.
-
-\def\smalllispx{\aboveenvbreak\begingroup\inENV
-% This group ends at the end of the @lisp body
-\hfuzz=12truept % Don't be fussy
-% Make spaces be word-separators rather than space tokens.
-\sepspaces %
-% Single space lines
-\singlespace %
-% The following causes blank lines not to be ignored
-% by adding a space to the end of each line.
-\let\par=\lisppar
-\def\Esmalllisp{\endgroup\afterenvbreak}%
-\parskip=0pt
-\advance \leftskip by \lispnarrowing
-\parindent=0pt
-\let\exdent=\internalexdent
-\obeyspaces \obeylines \ninett \indexfonts \rawbackslash
-\def\next##1{}\next}
+\gdef\sepspaces{\obeyspaces\let =\tie}}
+
+% Define \obeyedspace to be our active space, whatever it is. This is
+% for use in \parsearg.
+{\sepspaces%
+\global\let\obeyedspace= }
+
+% This space is always present above and below environments.
+\newskip\envskipamount \envskipamount = 0pt
+
+% Make spacing and below environment symmetrical. We use \parskip here
+% to help in doing that, since in @example-like environments \parskip
+% is reset to zero; thus the \afterenvbreak inserts no space -- but the
+% start of the next paragraph will insert \parskip
+%
+\def\aboveenvbreak{{\advance\envskipamount by \parskip
+\endgraf \ifdim\lastskip<\envskipamount
+\removelastskip \penalty-50 \vskip\envskipamount \fi}}
+
+\let\afterenvbreak = \aboveenvbreak
+
+% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
+\let\nonarrowing=\relax
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \cartouche: draw rectangle w/rounded corners around argument
+\font\circle=lcircle10
+\newdimen\circthick
+\newdimen\cartouter\newdimen\cartinner
+\newskip\normbskip\newskip\normpskip\newskip\normlskip
+\circthick=\fontdimen8\circle
+%
+\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
+\def\ctr{{\hskip 6pt\circle\char'010}}
+\def\cbl{{\circle\char'012\hskip -6pt}}
+\def\cbr{{\hskip 6pt\circle\char'011}}
+\def\carttop{\hbox to \cartouter{\hskip\lskip
+ \ctl\leaders\hrule height\circthick\hfil\ctr
+ \hskip\rskip}}
+\def\cartbot{\hbox to \cartouter{\hskip\lskip
+ \cbl\leaders\hrule height\circthick\hfil\cbr
+ \hskip\rskip}}
+%
+\newskip\lskip\newskip\rskip
+
+\long\def\cartouche{%
+\begingroup
+ \lskip=\leftskip \rskip=\rightskip
+ \leftskip=0pt\rightskip=0pt %we want these *outside*.
+ \cartinner=\hsize \advance\cartinner by-\lskip
+ \advance\cartinner by-\rskip
+ \cartouter=\hsize
+ \advance\cartouter by 18pt % allow for 3pt kerns on either
+% side, and for 6pt waste from
+% each corner char
+ \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
+ % Flag to tell @lisp, etc., not to narrow margin.
+ \let\nonarrowing=\comment
+ \vbox\bgroup
+ \baselineskip=0pt\parskip=0pt\lineskip=0pt
+ \carttop
+ \hbox\bgroup
+ \hskip\lskip
+ \vrule\kern3pt
+ \vbox\bgroup
+ \hsize=\cartinner
+ \kern3pt
+ \begingroup
+ \baselineskip=\normbskip
+ \lineskip=\normlskip
+ \parskip=\normpskip
+ \vskip -\parskip
+\def\Ecartouche{%
+ \endgroup
+ \kern3pt
+ \egroup
+ \kern3pt\vrule
+ \hskip\rskip
+ \egroup
+ \cartbot
+ \egroup
+\endgroup
+}}
+
+
+% This macro is called at the beginning of all the @example variants,
+% inside a group.
+\def\nonfillstart{%
+ \aboveenvbreak
+ \inENV % This group ends at the end of the body
+ \hfuzz = 12pt % Don't be fussy
+ \sepspaces % Make spaces be word-separators rather than space tokens.
+ \singlespace
+ \let\par = \lisppar % don't ignore blank lines
+ \obeylines % each line of input is a line of output
+ \parskip = 0pt
+ \parindent = 0pt
+ \emergencystretch = 0pt % don't try to avoid overfull boxes
+ % @cartouche defines \nonarrowing to inhibit narrowing
+ % at next level down.
+ \ifx\nonarrowing\relax
+ \advance \leftskip by \lispnarrowing
+ \exdentamount=\lispnarrowing
+ \let\exdent=\nofillexdent
+ \let\nonarrowing=\relax
+ \fi
+}
+
+% To ending an @example-like environment, we first end the paragraph
+% (via \afterenvbreak's vertical glue), and then the group. That way we
+% keep the zero \parskip that the environments set -- \parskip glue
+% will be inserted at the beginning of the next paragraph in the
+% document, after the environment.
+%
+\def\nonfillfinish{\afterenvbreak\endgroup}%
+
+% This macro is
+\def\lisp{\begingroup
+ \nonfillstart
+ \let\Elisp = \nonfillfinish
+ \tt
+ \rawbackslash % have \ input char produce \ char from current font
+ \gobble
+}
+
+% Define the \E... control sequence only if we are inside the
+% environment, so the error checking in \end will work.
+%
+% We must call \lisp last in the definition, since it reads the
+% return following the @example (or whatever) command.
+%
+\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
+\def\smallexample{\begingroup \def\Esmallexample{\nonfillfinish\endgroup}\lisp}
+\def\smalllisp{\begingroup \def\Esmalllisp{\nonfillfinish\endgroup}\lisp}
+
+% @smallexample and @smalllisp. This is not used unless the @smallbook
+% command is given. Originally contributed by Pavel@xerox.
+%
+\def\smalllispx{\begingroup
+ \nonfillstart
+ \let\Esmalllisp = \nonfillfinish
+ \let\Esmallexample = \nonfillfinish
+ %
+ % Smaller fonts for small examples.
+ \indexfonts \tt
+ \rawbackslash % make \ output the \ character from the current font (tt)
+ \gobble
+}
% This is @display; same as @lisp except use roman font.
+%
+\def\display{\begingroup
+ \nonfillstart
+ \let\Edisplay = \nonfillfinish
+ \gobble
+}
-\def\display{\begingroup\inENV %This group ends at the end of the @display body
-\aboveenvbreak
-% Make spaces be word-separators rather than space tokens.
-\sepspaces %
-% Single space lines
-\singlespace %
-% The following causes blank lines not to be ignored
-% by adding a space to the end of each line.
-\let\par=\lisppar
-\def\Edisplay{\endgroup\afterenvbreak}%
-\parskip=0pt
-\advance \leftskip by \lispnarrowing
-\parindent=0pt
-\let\exdent=\internalexdent
-\obeyspaces \obeylines
-\def\next##1{}\next}
-
-% This is @format; same as @lisp except use roman font and don't narrow margins
-
-\def\format{\begingroup\inENV %This group ends at the end of the @format body
-\aboveenvbreak
-% Make spaces be word-separators rather than space tokens.
-\sepspaces %
-\singlespace %
-% The following causes blank lines not to be ignored
-% by adding a space to the end of each line.
-\let\par=\lisppar
-\def\Eformat{\endgroup\afterenvbreak}
-\parskip=0pt \parindent=0pt
-\obeyspaces \obeylines
-\def\next##1{}\next}
-
-% @flushleft and @flushright
-
-\def\flushleft{%
-\begingroup\inENV %This group ends at the end of the @format body
-\aboveenvbreak
-% Make spaces be word-separators rather than space tokens.
-\sepspaces %
-% The following causes blank lines not to be ignored
-% by adding a space to the end of each line.
-% This also causes @ to work when the directive name
-% is terminated by end of line.
-\let\par=\lisppar
-\def\Eflushleft{\endgroup\afterenvbreak}%
-\parskip=0pt \parindent=0pt
-\obeyspaces \obeylines
-\def\next##1{}\next}
-
-\def\flushright{%
-\begingroup\inENV %This group ends at the end of the @format body
-\aboveenvbreak
-% Make spaces be word-separators rather than space tokens.
-\sepspaces %
-% The following causes blank lines not to be ignored
-% by adding a space to the end of each line.
-% This also causes @ to work when the directive name
-% is terminated by end of line.
-\let\par=\lisppar
-\def\Eflushright{\endgroup\afterenvbreak}%
-\parskip=0pt \parindent=0pt
-\advance \leftskip by 0pt plus 1fill
-\obeyspaces \obeylines
-\def\next##1{}\next}
-
-% @quotation - narrow the margins.
+% This is @format; same as @display except don't narrow margins.
+%
+\def\format{\begingroup
+ \let\nonarrowing = t
+ \nonfillstart
+ \let\Eformat = \nonfillfinish
+ \gobble
+}
+% @flushleft (same as @format) and @flushright.
+%
+\def\flushleft{\begingroup
+ \let\nonarrowing = t
+ \nonfillstart
+ \let\Eflushleft = \nonfillfinish
+ \gobble
+}
+\def\flushright{\begingroup
+ \let\nonarrowing = t
+ \nonfillstart
+ \let\Eflushright = \nonfillfinish
+ \advance\leftskip by 0pt plus 1fill
+ \gobble}
+
+% @quotation does normal linebreaking (hence we can't use \nonfillstart)
+% and narrows the margins.
+%
\def\quotation{%
-\begingroup\inENV %This group ends at the end of the @quotation body
-{\parskip=0pt % because we will skip by \parskip too, later
-\aboveenvbreak}%
-\singlespace
-\parindent=0pt
-\def\Equotation{\par\endgroup\afterenvbreak}%
-\advance \rightskip by \lispnarrowing
-\advance \leftskip by \lispnarrowing}
+ \begingroup\inENV %This group ends at the end of the @quotation body
+ {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
+ \singlespace
+ \parindent=0pt
+ % We have retained a nonzero parskip for the environment, since we're
+ % doing normal filling. So to avoid extra space below the environment...
+ \def\Equotation{\parskip = 0pt \nonfillfinish}%
+ %
+ % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
+ \ifx\nonarrowing\relax
+ \advance\leftskip by \lispnarrowing
+ \advance\rightskip by \lispnarrowing
+ \exdentamount = \lispnarrowing
+ \let\nonarrowing = \relax
+ \fi
+}
\message{defuns,}
% Define formatter for defuns
\def\activeparens{%
\catcode`\(=\active \catcode`\)=\active \catcode`\&=\active
\catcode`\[=\active \catcode`\]=\active}
+
+% Make control sequences which act like normal parenthesis chars.
+\let\lparen = ( \let\rparen = )
+
{\activeparens % Now, smart parens don't turn on until &foo (see \amprm)
+
+% Be sure that we always have a definition for `(', etc. For example,
+% if the fn name has parens in it, \boldbrax will not be in effect yet,
+% so TeX would otherwise complain about undefined control sequence.
+\global\let(=\lparen \global\let)=\rparen
+\global\let[=\lbrack \global\let]=\rbrack
+
\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
+% This is used to turn on special parens
+% but make & act ordinary (given that it's active).
+\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr}
% Definitions of (, ) and & used in args for functions.
% This is the definition of ( outside of all parentheses.
\advance \hsize by -\dimen2 \advance \hsize by -\dimen3
\rlap{\rightline{{\rm #2}\hskip \deftypemargin}}}%
% Make all lines underfull and no complaints:
-\tolerance=10000 \hbadness=10000
+\tolerance=10000 \hbadness=10000
+\advance\leftskip by -\defbodyindent
+\exdentamount=\defbodyindent
{\df #1}\enskip % Generate function name
}
\def#2{\begingroup\obeylines\activeparens\spacesplit#3}%
\parindent=0in
\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
+\exdentamount=\defbodyindent
\begingroup %
-\catcode 61=\active %
+\catcode 61=\active % 61 is `='
\obeylines\activeparens\spacesplit#3}
\def\defmethparsebody #1#2#3#4 {\begingroup\inENV %
\def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}%
\parindent=0in
\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
+\exdentamount=\defbodyindent
\begingroup\obeylines\activeparens\spacesplit{#3{#4}}}
\def\defopparsebody #1#2#3#4#5 {\begingroup\inENV %
\begingroup\obeylines\activeparens\spacesplit{#3{##2}}}%
\parindent=0in
\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
+\exdentamount=\defbodyindent
\begingroup\obeylines\activeparens\spacesplit{#3{#5}}}
+% These parsing functions are similar to the preceding ones
+% except that they do not make parens into active characters.
+% These are used for "variables" since they have no arguments.
+
+\def\defvarparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
+\medbreak %
+% Define the end token that this defining construct specifies
+% so that it will exit this group.
+\def#1{\endgraf\endgroup\medbreak}%
+\def#2{\begingroup\obeylines\spacesplit#3}%
+\parindent=0in
+\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
+\exdentamount=\defbodyindent
+\begingroup %
+\catcode 61=\active %
+\obeylines\spacesplit#3}
+
+% This is used for \def{tp,vr}parsebody. It could probably be used for
+% some of the others, too, with some judicious conditionals.
+%
+\def\parsebodycommon#1#2#3{%
+ \begingroup\inENV %
+ \medbreak %
+ % Define the end token that this defining construct specifies
+ % so that it will exit this group.
+ \def#1{\endgraf\endgroup\medbreak}%
+ \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}%
+ \parindent=0in
+ \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
+ \exdentamount=\defbodyindent
+ \begingroup\obeylines
+}
+
+\def\defvrparsebody#1#2#3#4 {%
+ \parsebodycommon{#1}{#2}{#3}%
+ \spacesplit{#3{#4}}%
+}
+
+% This loses on `@deftp {Data Type} {struct termios}' -- it thinks the
+% type is just `struct', because we lose the braces in `{struct
+% termios}' when \spacesplit reads its undelimited argument. Sigh.
+% \let\deftpparsebody=\defvrparsebody
+%
+% So, to get around this, we put \empty in with the type name. That
+% way, TeX won't find exactly `{...}' as an undelimited argument, and
+% won't strip off the braces.
+%
+\def\deftpparsebody #1#2#3#4 {%
+ \parsebodycommon{#1}{#2}{#3}%
+ \spacesplit{\parsetpheaderline{#3{#4}}}\empty
+}
+
+% Fine, but then we have to eventually remove the \empty *and* the
+% braces (if any). That's what this does, putting the result in \tptemp.
+%
+\def\removeemptybraces\empty#1\relax{\def\tptemp{#1}}%
+
+% After \spacesplit has done its work, this is called -- #1 is the final
+% thing to call, #2 the type name (which starts with \empty), and #3
+% (which might be empty) the arguments.
+%
+\def\parsetpheaderline#1#2#3{%
+ \removeemptybraces#2\relax
+ #1{\tptemp}{#3}%
+}%
+
+\def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV %
+\medbreak %
+% Define the end token that this defining construct specifies
+% so that it will exit this group.
+\def#1{\endgraf\endgroup\medbreak}%
+\def#2##1 ##2 {\def#4{##1}%
+\begingroup\obeylines\spacesplit{#3{##2}}}%
+\parindent=0in
+\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
+\exdentamount=\defbodyindent
+\begingroup\obeylines\spacesplit{#3{#5}}}
+
% Split up #2 at the first space token.
% call #1 with two arguments:
% the first is all of #2 before the space token,
\def\deftypefunargs #1{%
% Expand, preventing hyphenation at `-' chars.
% Note that groups don't affect changes in \hyphenchar.
-\functionparens
-\code{#1}%
+% Use \boldbraxnoamp, not \functionparens, so that & is not special.
+\boldbraxnoamp
+\tclose{#1}% avoid \code because of side effects on active chars
\interlinepenalty=10000
\advance\rightskip by 0pt plus 1fil
\endgraf\penalty 10000\vskip -\parskip\penalty 10000%
% #1 is the data type, #2 the name, #3 the args.
\def\deftypefunheaderx #1#2 #3\relax{%
\doind {fn}{\code{#2}}% Make entry in function index
-\begingroup\defname {\code{#1} #2}{Function}%
+\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Function}%
\deftypefunargs {#3}\endgroup %
\catcode 61=\other % Turn off change made in \defparsebody
}
\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader}
+% \defheaderxcond#1\relax$$$
+% puts #1 in @code, followed by a space, but does nothing if #1 is null.
+\def\defheaderxcond#1#2$$${\ifx#1\relax\else\code{#1#2} \fi}
+
% #1 is the classification. #2 is the data type. #3 is the name and args.
\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax}
% #1 is the classification, #2 the data type, #3 the name, #4 the args.
\def\deftypefnheaderx #1#2#3 #4\relax{%
\doind {fn}{\code{#3}}% Make entry in function index
-\begingroup\defname {\code{#2} #3}{#1}%
+\begingroup
+\normalparens % notably, turn off `&' magic, which prevents
+% at least some C++ text from working
+\defname {\defheaderxcond#2\relax$$$#3}{#1}%
\deftypefunargs {#4}\endgroup %
\catcode 61=\other % Turn off change made in \defparsebody
}
\defunargs {#3}\endgroup %
}
-% @deftypemethod class type frobnicate argument
-
-\def\deftypemethod{\defmethparsebody\Edeftypemethod\deftypemethodx%
-\deftypemethodheader}
-
-% #1 is the class. #2 is the data type. #3 is the name and args.
-\def\deftypemethodheader #1#2#3{\deftypemethodheaderx{#1}{#2}#3 \relax}
-% #1 is the class, #2 the data type, #3 then name , #4 the args.
-\def\deftypemethodheaderx #1#2#3 #4\relax{\dosubind {fn}{\code{#3}}{on #1}%
-\begingroup\defname {\code{#2} #3}{Method on #1}%
-\deftypefunargs {#4}\endgroup
-}
-
% @defcv {Class Option} foo-class foo-flag
\def\defcv #1 {\def\defcvtype{#1}%
-\defopparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
+\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
\def\defcvarheader #1#2#3{%
\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
% @defivar == @defcv {Instance Variable}
-\def\defivar{\defmethparsebody\Edefivar\defivarx\defivarheader}
+\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
\def\defivarheader #1#2#3{%
\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
% @defvr Counter foo-count
-\def\defvr{\defmethparsebody\Edefvr\defvrx\defvrheader}
+\def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader}
\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}%
\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup}
% @defvar == @defvr Variable
-\def\defvar{\defparsebody\Edefvar\defvarx\defvarheader}
+\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
\begingroup\defname {#1}{Variable}%
% @defopt == @defvr {User Option}
-\def\defopt{\defparsebody\Edefopt\defoptx\defoptheader}
+\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
\begingroup\defname {#1}{User Option}%
% @deftypevar int foobar
-\def\deftypevar{\defparsebody\Edeftypevar\deftypevarx\deftypevarheader}
+\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
% #1 is the data type. #2 is the name.
\def\deftypevarheader #1#2{%
\doind {vr}{\code{#2}}% Make entry in variables index
-\begingroup\defname {\code{#1} #2}{Variable}%
+\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Variable}%
\interlinepenalty=10000
\endgraf\penalty 10000\vskip -\parskip\penalty 10000
\endgroup}
% @deftypevr {Global Flag} int enable
-\def\deftypevr{\defmethparsebody\Edeftypevr\deftypevrx\deftypevrheader}
+\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
\def\deftypevrheader #1#2#3{\doind {vr}{\code{#3}}%
-\begingroup\defname {\code{#2} #3}{#1}
+\begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1}
\interlinepenalty=10000
\endgraf\penalty 10000\vskip -\parskip\penalty 10000
\endgroup}
% @deftp Class window height width ...
-\def\deftp{\defmethparsebody\Edeftp\deftpx\deftpheader}
+\def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader}
\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
\def\deftpx #1 {\errmessage{@deftpx in invalid context}}
+
\message{cross reference,}
% Define cross-reference macros
\newwrite \auxfile
\newif\ifhavexrefs % True if xref values are known.
\newif\ifwarnedxrefs % True if we warned once that they aren't known.
+% @inforef is simple.
+\def\inforef #1{\inforefzzz #1,,,,**}
+\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
+ node \samp{\ignorespaces#1{}}}
+
% \setref{foo} defines a cross-reference point named foo.
\def\setref#1{%
-%\dosetq{#1-title}{Ytitle}%
+\dosetq{#1-title}{Ytitle}%
\dosetq{#1-pg}{Ypagenumber}%
\dosetq{#1-snt}{Ysectionnumberandtype}}
\def\unnumbsetref#1{%
-%\dosetq{#1-title}{Ytitle}%
+\dosetq{#1-title}{Ytitle}%
\dosetq{#1-pg}{Ypagenumber}%
\dosetq{#1-snt}{Ynothing}}
\def\appendixsetref#1{%
-%\dosetq{#1-title}{Ytitle}%
+\dosetq{#1-title}{Ytitle}%
\dosetq{#1-pg}{Ypagenumber}%
\dosetq{#1-snt}{Yappendixletterandtype}}
% cross-reference, #3 the printed node name, #4 the name of the Info
% file, #5 the name of the printed manual. All but the node name can be
% omitted.
-%
-\def\pxref#1{see \xrefX[#1,,,,,,,]}
-\def\xref#1{See \xrefX[#1,,,,,,,]}
-\def\ref#1{\xrefX[#1,,,,,,,]}
-\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup%
-\def\printedmanual{\ignorespaces #5}%
-\def\printednodename{\ignorespaces #3}%
-%
-\setbox1=\hbox{\printedmanual}%
-\setbox0=\hbox{\printednodename}%
-\ifdim \wd0=0pt%
-\def\printednodename{\ignorespaces #1}%
-%%% Uncommment the following line to make the actual chapter or section title
-%%% appear inside the square brackets.
-%\def\printednodename{#1-title}%
-\fi%
%
-%
-% If we use \unhbox0 and \unhbox1 to print the node names, TeX does
-% not insert empty discretionaries after hyphens, which means that it
-% will not find a line break at a hyphen in a node names. Since some
-% manuals are best written with fairly long node names, containing
-% hyphens, this is a loss. Therefore, we simply give the text of
-% the node name again, so it is as if TeX is seeing it for the first
-% time.
-\ifdim \wd1>0pt
-section ``\printednodename'' in \cite{\printedmanual}%
-\else%
-\turnoffactive%
-\refx{#1-snt}{} [\printednodename], page\tie\refx{#1-pg}{}%
-\fi
+\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
+\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
+\def\ref#1{\xrefX[#1,,,,,,,]}
+\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
+ \def\printedmanual{\ignorespaces #5}%
+ \def\printednodename{\ignorespaces #3}%
+ \setbox1=\hbox{\printedmanual}%
+ \setbox0=\hbox{\printednodename}%
+ \ifdim \wd0 = 0pt
+ % No printed node name was explicitly given.
+ \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
+ % Use the node name inside the square brackets.
+ \def\printednodename{\ignorespaces #1}%
+ \else
+ % Use the actual chapter/section title appear inside
+ % the square brackets. Use the real section title if we have it.
+ \ifdim \wd1>0pt%
+ % It is in another manual, so we don't have it.
+ \def\printednodename{\ignorespaces #1}%
+ \else
+ \ifhavexrefs
+ % We know the real title if we have the xref values.
+ \def\printednodename{\refx{#1-title}{}}%
+ \else
+ % Otherwise just copy the Info node name.
+ \def\printednodename{\ignorespaces #1}%
+ \fi%
+ \fi
+ \fi
+ \fi
+ %
+ % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
+ % insert empty discretionaries after hyphens, which means that it will
+ % not find a line break at a hyphen in a node names. Since some manuals
+ % are best written with fairly long node names, containing hyphens, this
+ % is a loss. Therefore, we give the text of the node name again, so it
+ % is as if TeX is seeing it for the first time.
+ \ifdim \wd1 > 0pt
+ \putwordsection{} ``\printednodename'' in \cite{\printedmanual}%
+ \else
+ % _ (for example) has to be the character _ for the purposes of the
+ % control sequence corresponding to the node, but it has to expand
+ % into the usual \leavevmode...\vrule stuff for purposes of
+ % printing. So we \turnoffactive for the \refx-snt, back on for the
+ % printing, back off for the \refx-pg.
+ {\turnoffactive \refx{#1-snt}{}}%
+ \space [\printednodename],\space
+ \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
+ \fi
\endgroup}
% \dosetq is the interface for calls from other macros
% Use \turnoffactive so that punctuation chars such as underscore
% work in node names.
-\def\dosetq #1#2{{\let\folio=0 \turnoffactive%
+\def\dosetq #1#2{{\let\folio=0 \turnoffactive \auxhat%
\edef\next{\write\auxfile{\internalsetq {#1}{#2}}}%
\next}}
\def\Ypagenumber{\folio}
-\def\Ytitle{\thischapter}
+\def\Ytitle{\thissection}
\def\Ynothing{}
\def\Ysectionnumberandtype{%
-\ifnum\secno=0 Chapter\xreftie\the\chapno %
-\else \ifnum \subsecno=0 Section\xreftie\the\chapno.\the\secno %
+\ifnum\secno=0 \putwordChapter\xreftie\the\chapno %
+\else \ifnum \subsecno=0 \putwordSection\xreftie\the\chapno.\the\secno %
\else \ifnum \subsubsecno=0 %
-Section\xreftie\the\chapno.\the\secno.\the\subsecno %
+\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno %
\else %
-Section\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno %
+\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno %
\fi \fi \fi }
\def\Yappendixletterandtype{%
-\ifnum\secno=0 Appendix\xreftie'char\the\appendixno{}%
-\else \ifnum \subsecno=0 Section\xreftie'char\the\appendixno.\the\secno %
+\ifnum\secno=0 \putwordAppendix\xreftie'char\the\appendixno{}%
+\else \ifnum \subsecno=0 \putwordSection\xreftie'char\the\appendixno.\the\secno %
\else \ifnum \subsubsecno=0 %
-Section\xreftie'char\the\appendixno.\the\secno.\the\subsecno %
+\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno %
\else %
-Section\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno %
+\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno %
\fi \fi \fi }
\gdef\xreftie{'tie}
% Use TeX 3.0's \inputlineno to get the line number, for better error
% messages, but if we're using an old version of TeX, don't do anything.
-%
+%
\ifx\inputlineno\thisisundefined
\let\linenumber = \empty % Non-3.0.
\else
\catcode `\\17=\other
\catcode `\\18=\other
\catcode `\\19=\other
-\catcode `\\1a=\other
+\catcode 26=\other
\catcode `\^^[=\other
\catcode `\^^\=\other
\catcode `\^^]=\other
\catcode `\$=\other
\catcode `\#=\other
\catcode `\&=\other
+% `\+ does not work, so use 43.
+\catcode 43=\other
+% Make the characters 128-255 be printing characters
+{%
+ \count 1=128
+ \def\loop{%
+ \catcode\count 1=\other
+ \advance\count 1 by 1
+ \ifnum \count 1<256 \loop \fi
+ }%
+}%
% the aux file uses ' as the escape.
% Turn off \ as an escape so we do not lose on
% entries which were dumped with control sequences in their names.
\catcode `\{=1 \catcode `\}=2
\catcode `\%=\other
\catcode `\'=0
+\catcode`\^=7 % to make ^^e4 etc usable in xref tags
\catcode `\\=\other
\openin 1 \jobname.aux
\ifeof 1 \else \closein 1 \input \jobname.aux \global\havexrefstrue
+\global\warnedobstrue
\fi
% Open the new aux file. Tex will close it automatically at exit.
\openout \auxfile=\jobname.aux
\newcount \footnoteno
+% The trailing space in the following definition for supereject is
+% vital for proper filling; pages come out unaligned when you do a
+% pagealignmacro call if that space before the closing brace is
+% removed. (Generally, numeric constants should always be followed by a
+% space to prevent strange expansion errors.)
\def\supereject{\par\penalty -20000\footnoteno =0 }
+% @footnotestyle is meaningful for info output only..
+\let\footnotestyle=\comment
+
\let\ptexfootnote=\footnote
{\catcode `\@=11
-\long\gdef\footnote #1{\global\advance \footnoteno by \@ne
-\removelastskip
-\edef\thisfootno{$^{\the\footnoteno}$}%
-\let\@sf\empty
-\ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi
-\thisfootno\@sf \footnotezzz{#1}}
-% \parsearg\footnotezzz}
-
-\long\gdef\footnotezzz #1{\insert\footins{
-\interlinepenalty\interfootnotelinepenalty
-\splittopskip\ht\strutbox % top baseline for broken footnotes
-\splitmaxdepth\dp\strutbox \floatingpenalty\@MM
-\leftskip\z@skip \rightskip\z@skip \spaceskip\z@skip \xspaceskip\z@skip
-\footstrut\parindent=\defaultparindent\hang\textindent{\thisfootno}#1\strut}}
+%
+% Auto-number footnotes. Otherwise like plain.
+\gdef\footnote{%
+ \global\advance\footnoteno by \@ne
+ \edef\thisfootno{$^{\the\footnoteno}$}%
+ %
+ % In case the footnote comes at the end of a sentence, preserve the
+ % extra spacing after we do the footnote number.
+ \let\@sf\empty
+ \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi
+ %
+ % Remove inadvertent blank space before typesetting the footnote number.
+ \unskip
+ \thisfootno\@sf
+ \footnotezzz
+}%
+
+% Don't bother with the trickery in plain.tex to not require the
+% footnote text as a parameter. Our footnotes don't need to be so general.
+%
+\long\gdef\footnotezzz#1{\insert\footins{%
+ % We want to typeset this text as a normal paragraph, even if the
+ % footnote reference occurs in (for example) a display environment.
+ % So reset some parameters.
+ \interlinepenalty\interfootnotelinepenalty
+ \splittopskip\ht\strutbox % top baseline for broken footnotes
+ \splitmaxdepth\dp\strutbox
+ \floatingpenalty\@MM
+ \leftskip\z@skip
+ \rightskip\z@skip
+ \spaceskip\z@skip
+ \xspaceskip\z@skip
+ \parindent\defaultparindent
+ %
+ % Hang the footnote text off the number.
+ \hang
+ \textindent{\thisfootno}%
+ %
+ % Don't crash into the line above the footnote text. Since this
+ % expands into a box, it must come within the paragraph, lest it
+ % provide a place where TeX can split the footnote.
+ \footstrut
+ #1\strut}%
+}
}%end \catcode `\@=11
+% Set the baselineskip to #1, and the lineskip and strut size
+% correspondingly. There is no deep meaning behind these magic numbers
+% used as factors; they just match (closely enough) what Knuth defined.
+%
+\def\lineskipfactor{.08333}
+\def\strutheightpercent{.70833}
+\def\strutdepthpercent {.29167}
+%
+\def\setleading#1{%
+ \normalbaselineskip = #1\relax
+ \normallineskip = \lineskipfactor\normalbaselineskip
+ \normalbaselines
+ \setbox\strutbox =\hbox{%
+ \vrule width0pt height\strutheightpercent\baselineskip
+ depth \strutdepthpercent \baselineskip
+ }%
+}
+
+% @| inserts a changebar to the left of the current line. It should
+% surround any changed text. This approach does *not* work if the
+% change spans more than two lines of output. To handle that, we would
+% have adopt a much more difficult approach (putting marks into the main
+% vertical list for the beginning and end of each change).
+%
+\def\|{%
+ % \vadjust can only be used in horizontal mode.
+ \leavevmode
+ %
+ % Append this vertical mode material after the current line in the output.
+ \vadjust{%
+ % We want to insert a rule with the height and depth of the current
+ % leading; that is exactly what \strutbox is supposed to record.
+ \vskip-\baselineskip
+ %
+ % \vadjust-items are inserted at the left edge of the type. So
+ % the \llap here moves out into the left-hand margin.
+ \llap{%
+ %
+ % For a thicker or thinner bar, change the `1pt'.
+ \vrule height\baselineskip width1pt
+ %
+ % This is the space between the bar and the text.
+ \hskip 12pt
+ }%
+ }%
+}
+
+% For a final copy, take out the rectangles
+% that mark overfull boxes (in case you have decided
+% that the text looks ok even though it passes the margin).
+%
+\def\finalout{\overfullrule=0pt}
+
+
% End of control word definitions.
\message{and turning on texinfo input format.}
% Set some numeric style parameters, for 8.5 x 11 format.
-%\hsize = 6.5in
+\hsize = 6in
+\hoffset = .25in
\newdimen\defaultparindent \defaultparindent = 15pt
\parindent = \defaultparindent
-\parskip 18pt plus 1pt
-\baselineskip 15pt
+\parskip 3pt plus 2pt minus 1pt
+\setleading{13.2pt}
\advance\topskip by 1.2cm
+\chapheadingskip = 15pt plus 4pt minus 2pt
+\secheadingskip = 12pt plus 3pt minus 2pt
+\subsecheadingskip = 9pt plus 2pt minus 2pt
+
% Prevent underfull vbox error messages.
\vbadness=10000
+% Following George Bush, just get rid of widows and orphans.
+\widowpenalty=10000
+\clubpenalty=10000
+
% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
% using an old version of TeX, don't do anything. We want the amount of
% stretch added to depend on the line length, hence the dependence on
% \hsize. This makes it come to about 9pt for the 8.5x11 format.
-%
-\ifx\emergencystretch\thisisundefined \else
+%
+\ifx\emergencystretch\thisisundefined
+ % Allow us to assign to \emergencystretch anyway.
+ \def\emergencystretch{\dimen0}%
+\else
\emergencystretch = \hsize
\divide\emergencystretch by 45
\fi
-% Use @smallbook to reset parameters for 7x9.5 format
+% Use @smallbook to reset parameters for 7x9.5 format (or else 7x9.25)
\def\smallbook{
-\global\lispnarrowing = 0.3in
-\global\baselineskip 12pt
-\global\parskip 3pt plus 1pt
-\global\hsize = 5in
-\global\doublecolumnhsize=2.4in \global\doublecolumnvsize=15.0in
-\global\vsize=7.5in
+ \global\chapheadingskip = 15pt plus 4pt minus 2pt
+ \global\secheadingskip = 12pt plus 3pt minus 2pt
+ \global\subsecheadingskip = 9pt plus 2pt minus 2pt
+ %
+ \global\lispnarrowing = 0.3in
+ \setleading{12pt}
+ \advance\topskip by -1cm
+ \global\parskip 2pt plus 1pt
+ \global\hsize = 5in
+ \global\vsize=7.5in
+ \global\tolerance=700
+ \global\hfuzz=1pt
+ \global\contentsrightmargin=0pt
+ \global\deftypemargin=0pt
+ \global\defbodyindent=.5cm
+ %
+ \global\pagewidth=\hsize
+ \global\pageheight=\vsize
+ %
+ \global\let\smalllisp=\smalllispx
+ \global\let\smallexample=\smalllispx
+ \global\def\Esmallexample{\Esmalllisp}
+}
+
+% Use @afourpaper to print on European A4 paper.
+\def\afourpaper{
\global\tolerance=700
\global\hfuzz=1pt
+\setleading{12pt}
+\global\parskip 15pt plus 1pt
+
+\global\vsize= 53\baselineskip
+\advance\vsize by \topskip
+%\global\hsize= 5.85in % A4 wide 10pt
+\global\hsize= 6.5in
+\global\outerhsize=\hsize
+\global\advance\outerhsize by 0.5in
+\global\outervsize=\vsize
+\global\advance\outervsize by 0.6in
\global\pagewidth=\hsize
\global\pageheight=\vsize
-
-\global\let\smalllisp=\smalllispx
-\global\let\smallexample=\smalllispx
-\global\def\Esmallexample{\Esmalllisp}
}
-%% For a final copy, take out the rectangles
-%% that mark overfull boxes (in case you have decided
-%% that the text looks ok even though it passes the margin).
-\def\finalout{\hfuzz=\maxdimen}
+\bindingoffset=0pt
+\normaloffset=\hoffset
+\pagewidth=\hsize
+\pageheight=\vsize
+
+% Allow control of the text dimensions. Parameters in order: textheight;
+% textwidth; voffset; hoffset; binding offset; topskip.
+% All require a dimension;
+% header is additional; added length extends the bottom of the page.
+
+\def\changepagesizes#1#2#3#4#5#6{
+ \global\vsize= #1
+ \global\topskip= #6
+ \advance\vsize by \topskip
+ \global\voffset= #3
+ \global\hsize= #2
+ \global\outerhsize=\hsize
+ \global\advance\outerhsize by 0.5in
+ \global\outervsize=\vsize
+ \global\advance\outervsize by 0.6in
+ \global\pagewidth=\hsize
+ \global\pageheight=\vsize
+ \global\normaloffset= #4
+ \global\bindingoffset= #5}
+
+% A specific text layout, 24x15cm overall, intended for A4 paper. Top margin
+% 29mm, hence bottom margin 28mm, nominal side margin 3cm.
+\def\afourlatex
+ {\global\tolerance=700
+ \global\hfuzz=1pt
+ \setleading{12pt}
+ \global\parskip 15pt plus 1pt
+ \advance\baselineskip by 1.6pt
+ \changepagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm}
+ }
+
+% Use @afourwide to print on European A4 paper in wide format.
+\def\afourwide{\afourpaper
+\changepagesizes{9.5in}{6.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}}
% Define macros to output various characters with catcode for normal text.
\catcode`\"=\other
% otherwise. Since all the Computer Modern typewriter fonts have zero
% interword stretch (and shrink), and it is reasonable to expect all
% typewriter fonts to have this, we can check that font parameter.
-%
+%
\def\ifusingtt#1#2{\ifdim \fontdimen3\the\font=0pt #1\else #2\fi}
% Turn off all special characters except @
\def~{{\tt \char '176}}
\chardef\hat=`\^
\catcode`\^=\active
+\def\auxhat{\def^{'hat}}
\def^{{\tt \hat}}
\catcode`\_=\active
\def_{\ifusingtt\normalunderscore\_}
% Subroutine for the previous macro.
-\def\_{\lvvmode \kern.06em \vbox{\hrule width.3em height.1ex}}
-
-% \lvvmode is equivalent in function to \leavevmode.
-% Using \leavevmode runs into trouble when written out to
-% an index file due to the expansion of \leavevmode into ``\unhbox
-% \voidb@x'' ---which looks to TeX like ``\unhbox \voidb\x'' due to our
-% magic tricks with @.
-\def\lvvmode{\vbox to 0pt{}}
+\def\_{\leavevmode \kern.06em \vbox{\hrule width.3em height.1ex}}
\catcode`\|=\active
\def|{{\tt \char '174}}
%\catcode 27=\active
%\def^^[{$\diamondsuit$}
-% Used sometimes to turn off (effectively) the active characters
-% even after parsing them.
-\def\turnoffactive{\let"=\normaldoublequote
-\let~=\normaltilde
-\let^=\normalcaret
-\let_=\normalunderscore
-\let|=\normalverticalbar
-\let<=\normalless
-\let>=\normalgreater
-\let+=\normalplus}
-
% Set up an active definition for =, but don't enable it most of the time.
{\catcode`\==\active
\global\def={{\tt \char 61}}}
+\catcode`+=\active
+\catcode`\_=\active
+
+% If a .fmt file is being used, characters that might appear in a file
+% name cannot be active until we have parsed the command line.
+% So turn them off again, and have \everyjob (or @setfilename) turn them on.
+% \otherifyactive is called near the end of this file.
+\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
+
\catcode`\@=0
% \rawbackslashxx output one backslash character in current font
% \catcode 17=0 % Define control-q
\catcode`\\=\active
+% Used sometimes to turn off (effectively) the active characters
+% even after parsing them.
+@def@turnoffactive{@let"=@normaldoublequote
+@let\=@realbackslash
+@let~=@normaltilde
+@let^=@normalcaret
+@let_=@normalunderscore
+@let|=@normalverticalbar
+@let<=@normalless
+@let>=@normalgreater
+@let+=@normalplus}
+
+@def@normalturnoffactive{@let"=@normaldoublequote
+@let\=@normalbackslash
+@let~=@normaltilde
+@let^=@normalcaret
+@let_=@normalunderscore
+@let|=@normalverticalbar
+@let<=@normalless
+@let>=@normalgreater
+@let+=@normalplus}
+
+% Make _ and + \other characters, temporarily.
+% This is canceled by @fixbackslash.
+@otherifyactive
+
% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
-% That is what \eatinput is for; after that, the `\' should revert to printing
+% That is what \eatinput is for; after that, the `\' should revert to printing
% a backslash.
%
@gdef@eatinput input texinfo{@fixbackslash}
@global@let\ = @eatinput
% On the other hand, perhaps the file did not have a `\input texinfo'. Then
-% the first `\{ in the file would cause an error. This macro tries to fix
+% the first `\{ in the file would cause an error. This macro tries to fix
% that, assuming it is called before the first `\' could plausibly occur.
-%
-@gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi}
+% Also back turn on active characters that might appear in the input
+% file name, in case not using a pre-dumped format.
+%
+@gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi
+ @catcode`+=@active @catcode`@_=@active}
%% These look ok in all fonts, so just make them not special. The @rm below
%% makes sure that the current font starts out as the newly loaded cmr10