</request>
<request name="get_registry">
+ <description summary="get global registry object">
+ This request creates a registry object that allows the client
+ to list and bind the global objects available from the
+ compositor.
+ </description>
<arg name="callback" type="new_id" interface="wl_registry"/>
</request>
<event name="error">
<description summary="fatal error event">
The error event is sent out when a fatal (non-recoverable)
- error has occurred.
+ error has occurred. The @object_id argument is the object
+ where the error occurred, most often in response to a request
+ to that object. The @code identifies the error and is defined
+ by the object interface. As such, each interface defines its
+ own set of error codes. The @message is an brief description
+ of the error, for (debugging) convenience.
</description>
<arg name="object_id" type="object"/>
<arg name="code" type="uint"/>
<event name="delete_id">
<description summary="acknowledge object id deletion">
- Server has deleted the id and client can now reuse it.
+ This event is used internally by the object ID management
+ logic. When a client deletes an object, the server will send
+ this event to acknowledge that it has seen the delete request.
+ When the client receive this event, it will know that it can
+ safely reuse the object ID
</description>
<arg name="id" type="uint" />
</event>
</interface>
<interface name="wl_registry" version="1">
+ <description summary="global registry object">
+ The global registry object. The server has a number of global
+ objects that are available to all clients. These objects
+ typically represent an actual object in the server (for example,
+ an input device) or they are singleton objects that provides
+ extension functionality.
+
+ When a client creates a registry object, the registry object
+ will emit a global event for each global currently in the
+ registry. Globals come and go as a result of device hotplugs,
+ reconfiguration or other events, and the registry will send out
+ @global and @global_remove events to keep the client up to date
+ with the changes. To mark the end of the initial burst of
+ events, the client can use the wl_display.sync request
+ immediately after calling wl_display.get_registry.
+
+ A client can 'bind' to a global object by using the bind
+ request. This creates a client side handle that lets the object
+ emit events to the client and lets the client invoke requests on
+ the object.
+ </description>
+
<request name="bind">
<description summary="bind an object to the display">
Binds a new, client-created object to the server using @name as
<event name="global">
<description summary="announce global object">
- Notify the client of global objects. These are objects that
- are created by the server. Globals are published on the
- initial client connection sequence, upon device hotplugs,
- device disconnects, reconfiguration or other events. A client
- can 'bind' to a global object by using the bind request. This
- creates a client side handle that lets the object emit events
- to the client and lets the client invoke requests on the
- object.
+ Notify the client of global objects.
</description>
<arg name="name" type="uint"/>
<arg name="interface" type="string"/>
<event name="global_remove">
<description summary="announce removal of global object">
- Notify the client of removed global objects.
+ Notify the client of removed global objects. This event
+ notifies the client that the global identifies by @name is no
+ longer available. If the client bound to the global using the
+ 'bind' request, the client should now destroy that object.
+ The object remains valid and requests to the object will be
+ ignored until the client destroys it, to avoid races between
+ the global going away and a client sending a request to it.
</description>
<arg name="name" type="uint"/>
</event>
<interface name="wl_buffer" version="1">
<description summary="content for a wl_surface">
- A buffer provides the content for a wl_surface. Buffers are
+ A buffer provides the content for a wl_surface. Buffers are
created through factory interfaces such as wl_drm, wl_shm or
- similar. It has a width and a height and can be attached to a
+ similar. It has a width and a height and can be attached to a
wl_surface, but the mechanism by which a client provides and
- updates the contents is defined by the buffer factory interface
+ updates the contents is defined by the buffer factory interface.
</description>
<request name="destroy" type="destructor">
<description summary="destroy a buffer">
- Destroy a buffer. This will invalidate the object id.
+ Destroy a buffer. If and how you need to release the backing
+ storage is defined by the buffer factory interface.
For possible side-effects to a surface, see wl_surface.attach.
</description>
<event name="release">
<description summary="compositor releases buffer">
Sent when this wl_buffer is no longer used by the compositor.
-
- If a client does not get a release event before the frame callback
- requested in the same wl_surface.commit that attaches this wl_buffer
- to a surface, then the client may assume, that the compositor will
- be using this wl_buffer until the client attaches another wl_buffer.
- Therefore the client will need a second wl_buffer to update the
- surface contents again.
-
- Otherwise, if a release event arrives before the frame callback, the
- client is immediately free to re-use the buffer and its backing
- storage, and does not necessarily need a second buffer. Typically
+ The client is now free to re-use or destroy this buffer and its
+ backing storage.
+
+ If a client receives a release event before the frame callback
+ requested in the same wl_surface.commit that attaches this
+ wl_buffer to a surface, then the client is immediately free to
+ re-use the buffer and its backing storage, and does not need a
+ second buffer for the next surface content update. Typically
this is possible, when the compositor maintains a copy of the
wl_surface contents, e.g. as a GL texture. This is an important
optimization for GL(ES) compositors with wl_shm clients.
<interface name="wl_data_offer" version="1">
+ <description summary="offer to transfer data">
+ A wl_data_offer represents a piece of data offered for transfer
+ by another client (the source client). It is used by the
+ copy-and-paste and drag-and-drop mechanisms. The offer
+ describes the different mime types that the data can be
+ converted to and provides the mechanism for transferring the
+ data directly from the source client.
+ </description>
+
<request name="accept">
<description summary="accept one of the offered mime-types">
Indicate that the client can accept the given mime-type, or
</request>
<request name="receive">
+ <description summary="request that the data is transferred">
+ To transfer the offered data, the client issues this request
+ and indicates the mime-type it wants to receive. The transfer
+ happens through the passed fd (typically a pipe(7) file
+ descriptor). The source client writes the data in the
+ mime-type representation requested and then closes the fd.
+ The receiving client reads from the read end of the pipe until
+ EOF and the closes its end, at which point the transfer is
+ complete.
+ </description>
<arg name="mime_type" type="string"/>
<arg name="fd" type="fd"/>
</request>
</interface>
<interface name="wl_data_source" version="1">
+ <description summary="offer to transfer data">
+ The wl_data_source object is the source side of a wl_data_offer.
+ It is created by the source client in a data transfer and
+ provides a way to describe the offered data and a way to respond
+ to requests to transfer the data.
+ </description>
+
<request name="offer">
<description summary="add an offered mime type">
This request adds a mime-type to the set of mime-types
<event name="cancelled">
<description summary="selection was cancelled">
- Another selection became active.
+ This data source has been replaced by another data source.
+ The client should clean up and destroy this data source.
</description>
</event>
</event>
<event name="enter">
+ <description summary="initiate drag and drop session">
+ This event is sent when an active drag-and-drop pointer enters
+ a surface owned by the client. The position of the pointer at
+ enter time is provided by the @x an @y arguments, in surface
+ local coordinates.
+ </description>
+
<arg name="serial" type="uint"/>
<arg name="surface" type="object" interface="wl_surface"/>
<arg name="x" type="fixed"/>
<arg name="id" type="object" interface="wl_data_offer" allow-null="true"/>
</event>
- <event name="leave"/>
+ <event name="leave">
+ <description summary="end drag and drop session">
+ This event is sent when the drag-and-drop pointer leaves the
+ surface and the session ends. The client must destroy the
+ wl_data_offer introduced at enter time at this point.
+ </description>
+ </event>
<event name="motion">
+ <description summary="drag and drop session motion">
+ This event is sent when the drag-and-drop pointer moves within
+ the currently focused surface. The new position of the pointer
+ is provided by the @x an @y arguments, in surface local
+ coordinates.
+ </description>
<arg name="time" type="uint"/>
<arg name="x" type="fixed"/>
<arg name="y" type="fixed"/>
</interface>
<interface name="wl_data_device_manager" version="1">
+ <description summary="data transfer interface">
+ The wl_data_device_manager is a a singleton global object that
+ provides access to inter-client data transfer mechanisms such as
+ copy and paste and drag and drop. These mechanisms are tied to
+ a wl_seat and this interface lets a client get a wl_data_device
+ corresponding to a wl_seat.
+ </description>
+
<request name="create_data_source">
<arg name="id" type="new_id" interface="wl_data_source"/>
</request>
A client can request a frame callback even without an attach,
damage, or any other state changes. wl_surface.commit triggers a
- repaint, so the callback event will arrive after the next output
- refresh where the surface is visible.
+ display update, so the callback event will arrive after the next
+ output refresh where the surface is visible.
</description>
<arg name="callback" type="new_id" interface="wl_callback"/>