Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
- without fee, provided that\n the above copyright notice appear in
+ without fee, provided that the above copyright notice appear in
all copies and that both that copyright notice and this permission
notice appear in supporting documentation, and that the name of
the copyright holders not be used in advertising or publicity
THIS SOFTWARE.
</copyright>
- <!-- The core global object. This is a special singleton object.
- It is used for internal wayland protocol features. -->
<interface name="wl_display" version="1">
- <request name="bind">
- <arg name="name" type="uint"/>
- <arg name="interface" type="string"/>
- <arg name="version" type="uint"/>
- <arg name="id" type="new_id" interface="wl_object"/>
- </request>
+ <description summary="core global object">
+ The core global object. This is a special singleton object. It
+ is used for internal Wayland protocol features.
+ </description>
- <!-- sync is an just an echo, which will reply with a key event.
- Since requests are handled in-order, this can be used as a
- barrier to ensure all previous requests have been handled.
- The key argument can be used to correlate between multiple
- sync invocations. -->
<request name="sync">
+ <description summary="asynchronous roundtrip">
+ The sync request asks the server to emit the 'done' event
+ on the provided wl_callback object. Since requests are
+ handled in-order, this can be used as a barrier to ensure all
+ previous requests have been handled.
+ </description>
<arg name="callback" type="new_id" interface="wl_callback"/>
</request>
- <!-- A fatal error has occurred. -->
+ <request name="get_registry">
+ <description summary="get global registry object">
+ This request creates a registry object that allows the client
+ to list and bind the global objects available from the
+ compositor.
+ </description>
+ <arg name="callback" type="new_id" interface="wl_registry"/>
+ </request>
+
<event name="error">
- <arg name="object_id" type="object" interface="wl_object"/>
+ <description summary="fatal error event">
+ The error event is sent out when a fatal (non-recoverable)
+ error has occurred. The @object_id argument is the object
+ where the error occurred, most often in response to a request
+ to that object. The @code identifies the error and is defined
+ by the object interface. As such, each interface defines its
+ own set of error codes. The @message is an brief description
+ of the error, for (debugging) convenience.
+ </description>
+ <arg name="object_id" type="object"/>
<arg name="code" type="uint"/>
<arg name="message" type="string"/>
</event>
<enum name="error">
- <entry name="invalid_object" value="0"/>
- <entry name="invalid_method" value="1"/>
- <entry name="no_memory" value="2"/>
+ <description summary="global error values">
+ These errors are global and can be emitted in response to any
+ server request.
+ </description>
+ <entry name="invalid_object" value="0"
+ summary="server couldn't find object"/>
+ <entry name="invalid_method" value="1"
+ summary="method doesn't exist on the specified interface"/>
+ <entry name="no_memory" value="2"
+ summary="server is out of memory"/>
</enum>
- <!-- Notify the client of global objects. These are objects that
- are created by the server. Globals are published on the
- initial client connection sequence, upon device hotplugs,
- device disconnects, reconfiguration or other events. The
- server will always announce an object before the object sends
- out events. -->
+ <event name="delete_id">
+ <description summary="acknowledge object id deletion">
+ This event is used internally by the object ID management
+ logic. When a client deletes an object, the server will send
+ this event to acknowledge that it has seen the delete request.
+ When the client receive this event, it will know that it can
+ safely reuse the object ID
+ </description>
+ <arg name="id" type="uint" />
+ </event>
+ </interface>
+
+ <interface name="wl_registry" version="1">
+ <description summary="global registry object">
+ The global registry object. The server has a number of global
+ objects that are available to all clients. These objects
+ typically represent an actual object in the server (for example,
+ an input device) or they are singleton objects that provides
+ extension functionality.
+
+ When a client creates a registry object, the registry object
+ will emit a global event for each global currently in the
+ registry. Globals come and go as a result of device hotplugs,
+ reconfiguration or other events, and the registry will send out
+ @global and @global_remove events to keep the client up to date
+ with the changes. To mark the end of the initial burst of
+ events, the client can use the wl_display.sync request
+ immediately after calling wl_display.get_registry.
+
+ A client can 'bind' to a global object by using the bind
+ request. This creates a client side handle that lets the object
+ emit events to the client and lets the client invoke requests on
+ the object.
+ </description>
+
+ <request name="bind">
+ <description summary="bind an object to the display">
+ Binds a new, client-created object to the server using @name as
+ the identifier.
+ </description>
+ <arg name="name" type="uint" summary="unique number id for object"/>
+ <arg name="id" type="new_id"/>
+ </request>
+
<event name="global">
+ <description summary="announce global object">
+ Notify the client of global objects.
+ </description>
<arg name="name" type="uint"/>
<arg name="interface" type="string"/>
<arg name="version" type="uint"/>
</event>
- <!-- Notify the client of removed global objects. -->
<event name="global_remove">
- <arg name="name" type="uint" />
- </event>
-
- <!-- Server has deleted the id and client can now reuse it. -->
- <event name="delete_id">
- <arg name="id" type="uint" />
+ <description summary="announce removal of global object">
+ Notify the client of removed global objects. This event
+ notifies the client that the global identifies by @name is no
+ longer available. If the client bound to the global using the
+ 'bind' request, the client should now destroy that object.
+ The object remains valid and requests to the object will be
+ ignored until the client destroys it, to avoid races between
+ the global going away and a client sending a request to it.
+ </description>
+ <arg name="name" type="uint"/>
</event>
</interface>
<interface name="wl_callback" version="1">
<event name="done">
- <arg name="time" type="uint"/>
+ <arg name="serial" type="uint"/>
</event>
</interface>
- <!-- A compositor. This object is a global. The compositor is in
- charge of combining the contents of multiple surfaces into one
- displayable output. -->
<interface name="wl_compositor" version="1">
- <!-- Factory request for a surface objects. A surface is akin to a
- window. -->
+ <description summary="the compositor singleton">
+ A compositor. This object is a singleton global. The
+ compositor is in charge of combining the contents of multiple
+ surfaces into one displayable output.
+ </description>
+
<request name="create_surface">
+ <description summary="create new surface">
+ Ask the compositor to create a new surface.
+ </description>
<arg name="id" type="new_id" interface="wl_surface"/>
</request>
+
+ <request name="create_region">
+ <description summary="create new region">
+ Ask the compositor to create a new region.
+ </description>
+ <arg name="id" type="new_id" interface="wl_region"/>
+ </request>
+ </interface>
+
+ <interface name="wl_shm_pool" version="1">
+ <description summary="a shared memory pool">
+ The wl_shm_pool object encapsulates a piece of memory shared
+ between the compositor and client. Through the wl_shm_pool
+ object, the client can allocate shared memory wl_buffer objects.
+ The objects will share the same underlying mapped memory.
+ Reusing the mapped memory avoids the setup/teardown overhead and
+ is useful when interactively resizing a surface or for many
+ small buffers.
+ </description>
+
+ <request name="create_buffer">
+ <description summary="create wl_buffer from pool">
+ Create a wl_buffer from the pool. The buffer is created a
+ offset bytes into the pool and has width and height as
+ specified. The stride arguments specifies the number of bytes
+ from beginning of one row to the beginning of the next. The
+ format is the pixel format of the buffer and must be one of
+ those advertised through the wl_shm.format event.
+
+ A buffer will keep a reference to the pool it was created from
+ so it is valid to destroy the pool immediately after creating
+ a buffer from it.
+ </description>
+
+ <arg name="id" type="new_id" interface="wl_buffer"/>
+ <arg name="offset" type="int"/>
+ <arg name="width" type="int"/>
+ <arg name="height" type="int"/>
+ <arg name="stride" type="int"/>
+ <arg name="format" type="uint"/>
+ </request>
+
+ <request name="destroy" type="destructor">
+ <description summary="destroy the pool">
+ Destroy the pool.
+ </description>
+ </request>
+
+ <request name="resize">
+ <description summary="change the size of the pool mapping">
+ This request will cause the server to remap the backing memory
+ for the pool from the fd passed when the pool was creating but
+ using the new size.
+ </description>
+
+ <arg name="size" type="int"/>
+ </request>
</interface>
- <!-- Shared memory support -->
<interface name="wl_shm" version="1">
+ <description summary="shared memory support">
+ Support for shared memory buffers.
+ </description>
+
<enum name="error">
<entry name="invalid_format" value="0"/>
<entry name="invalid_stride" value="1"/>
</enum>
<enum name="format">
- <entry name="argb32" value="0"/>
- <entry name="premultiplied_argb32" value="1"/>
- <entry name="xrgb32" value="2"/>
+ <entry name="argb8888" value="0"/>
+ <entry name="xrgb8888" value="1"/>
</enum>
- <!-- Transfer a shm buffer to the server. The allocated buffer
- would include at least stride * height bytes starting at the
- beginning of fd. The file descriptor is transferred over the
- socket using AF_UNIX magical features. width, height, stride
- and format describe the respective properties of the pixel
- data contained in the buffer. -->
- <request name="create_buffer">
- <arg name="id" type="new_id" interface="wl_buffer"/>
+ <request name="create_pool">
+ <description summary="create a shm pool">
+ This creates wl_shm_pool object, which can be used to create
+ shared memory based wl_buffer objects. The server will mmap
+ size bytes of the passed fd, to use as backing memory for then
+ pool.
+ </description>
+
+ <arg name="id" type="new_id" interface="wl_shm_pool"/>
<arg name="fd" type="fd"/>
- <arg name="width" type="int"/>
- <arg name="height" type="int"/>
- <arg name="stride" type="uint"/>
- <arg name="format" type="uint"/>
+ <arg name="size" type="int"/>
</request>
<event name="format">
</event>
</interface>
-
- <!-- A pixel buffer. Created using the drm, shm or similar objects.
- It has a size, visual and contents, but not a location on the
- screen. -->
<interface name="wl_buffer" version="1">
- <!-- Notify the server that the specified area of the buffers
- contents have changed. To describe a more complicated area
- of damage, break down the region into rectangles and use this
- request several times.
- -->
- <request name="damage">
- <arg name="x" type="int"/>
- <arg name="y" type="int"/>
- <arg name="width" type="int"/>
- <arg name="height" type="int"/>
+ <description summary="content for a wl_surface">
+ A buffer provides the content for a wl_surface. Buffers are
+ created through factory interfaces such as wl_drm, wl_shm or
+ similar. It has a width and a height and can be attached to a
+ wl_surface, but the mechanism by which a client provides and
+ updates the contents is defined by the buffer factory interface.
+ </description>
+
+ <request name="destroy" type="destructor">
+ <description summary="destroy a buffer">
+ Destroy a buffer. If and how you need to release the backing
+ storage is defined by the buffer factory interface.
+
+ For possible side-effects to a surface, see wl_surface.attach.
+ </description>
</request>
- <!-- Destroy a buffer. This will invalidate the object id. -->
- <request name="destroy" type="destructor"/>
-
- <!-- Sent when an attached buffer is no longer used by the compositor. -->
- <event name="release"/>
+ <event name="release">
+ <description summary="compositor releases buffer">
+ Sent when this wl_buffer is no longer used by the compositor.
+ The client is now free to re-use or destroy this buffer and its
+ backing storage.
+
+ If a client receives a release event before the frame callback
+ requested in the same wl_surface.commit that attaches this
+ wl_buffer to a surface, then the client is immediately free to
+ re-use the buffer and its backing storage, and does not need a
+ second buffer for the next surface content update. Typically
+ this is possible, when the compositor maintains a copy of the
+ wl_surface contents, e.g. as a GL texture. This is an important
+ optimization for GL(ES) compositors with wl_shm clients.
+ </description>
+ </event>
</interface>
<interface name="wl_data_offer" version="1">
- <!-- Indicate that the client can accept the given mime-type, or
- NULL for not accepted. Use for feedback during drag and
- drop. -->
+ <description summary="offer to transfer data">
+ A wl_data_offer represents a piece of data offered for transfer
+ by another client (the source client). It is used by the
+ copy-and-paste and drag-and-drop mechanisms. The offer
+ describes the different mime types that the data can be
+ converted to and provides the mechanism for transferring the
+ data directly from the source client.
+ </description>
+
<request name="accept">
- <arg name="time" type="uint"/>
- <arg name="type" type="string"/>
+ <description summary="accept one of the offered mime-types">
+ Indicate that the client can accept the given mime-type, or
+ NULL for not accepted. Use for feedback during drag and drop.
+ </description>
+
+ <arg name="serial" type="uint"/>
+ <arg name="type" type="string" allow-null="true"/>
</request>
<request name="receive">
+ <description summary="request that the data is transferred">
+ To transfer the offered data, the client issues this request
+ and indicates the mime-type it wants to receive. The transfer
+ happens through the passed fd (typically a pipe(7) file
+ descriptor). The source client writes the data in the
+ mime-type representation requested and then closes the fd.
+ The receiving client reads from the read end of the pipe until
+ EOF and the closes its end, at which point the transfer is
+ complete.
+ </description>
<arg name="mime_type" type="string"/>
<arg name="fd" type="fd"/>
</request>
<request name="destroy" type="destructor"/>
- <!-- Sent immediately after creating the wl_data_offer object. One
- event per offered mime type. -->
<event name="offer">
+ <description summary="advertise offered mime-type">
+ Sent immediately after creating the wl_data_offer object. One
+ event per offered mime type.
+ </description>
+
<arg name="type" type="string"/>
</event>
</interface>
<interface name="wl_data_source" version="1">
- <!-- Add an offered mime type. Can be called several times to
- offer multiple types. -->
+ <description summary="offer to transfer data">
+ The wl_data_source object is the source side of a wl_data_offer.
+ It is created by the source client in a data transfer and
+ provides a way to describe the offered data and a way to respond
+ to requests to transfer the data.
+ </description>
+
<request name="offer">
+ <description summary="add an offered mime type">
+ This request adds a mime-type to the set of mime-types
+ advertised to targets. Can be called several times to offer
+ multiple types.
+ </description>
<arg name="type" type="string"/>
</request>
- <!-- Destroy the selection. -->
- <request name="destroy" type="destructor"/>
+ <request name="destroy" type="destructor">
+ <description summary="destroy the data source">
+ Destroy the data source.
+ </description>
+ </request>
- <!-- Sent when a target accepts pointer_focus or motion events.
- If a target does not accept any of the offered types, type is
- NULL -->
<event name="target">
- <arg name="mime_type" type="string"/>
+ <description summary="a target accepts an offered mime-type">
+ Sent when a target accepts pointer_focus or motion events. If
+ a target does not accept any of the offered types, type is NULL.
+ </description>
+
+ <arg name="mime_type" type="string" allow-null="true"/>
</event>
- <!-- Request for data from another client. Send the data in the
- specified mime-type over the passed fd, the close it. -->
<event name="send">
+ <description summary="send the data">
+ Request for data from another client. Send the data as the
+ specified mime-type over the passed fd, then close the fd.
+ </description>
+
<arg name="mime_type" type="string"/>
<arg name="fd" type="fd"/>
</event>
- <!-- Another selection became active. -->
- <event name="cancelled"/>
+ <event name="cancelled">
+ <description summary="selection was cancelled">
+ This data source has been replaced by another data source.
+ The client should clean up and destroy this data source.
+ </description>
+ </event>
+
</interface>
<interface name="wl_data_device" version="1">
<request name="start_drag">
- <arg name="source" type="object" interface="wl_data_source"/>
- <arg name="surface" type="object" interface="wl_surface"/>
- <arg name="time" type="uint"/>
- </request>
-
- <request name="attach">
- <arg name="time" type="uint"/>
- <arg name="buffer" type="object" interface="wl_buffer"/>
- <arg name="x" type="int"/>
- <arg name="y" type="int"/>
+ <description summary="start drag and drop operation">
+ This request asks the compositor to start a drag and drop
+ operation on behalf of the client.
+
+ The source argument is the data source that provides the data
+ for the eventual data transfer. If source is NULL, enter, leave
+ and motion events are sent only to the client that initiated the
+ drag and the client is expected to handle the data passing
+ internally.
+
+ The origin surface is the surface where the drag originates and
+ the client must have an active implicit grab that matches the
+ serial.
+
+ The icon surface is an optional (can be nil) surface that
+ provides an icon to be moved around with the cursor. Initially,
+ the top-left corner of the icon surface is placed at the cursor
+ hotspot, but subsequent wl_surface.attach request can move the
+ relative position. Attach requests must be confirmed with
+ wl_surface.commit as usual.
+
+ The current and pending input regions of the icon wl_surface are
+ cleared, and wl_surface.set_input_region is ignored until the
+ wl_surface is no longer used as the icon surface. When the use
+ as an icon ends, the the current and pending input regions
+ become undefined, and the wl_surface is unmapped.
+ </description>
+ <arg name="source" type="object" interface="wl_data_source" allow-null="true"/>
+ <arg name="origin" type="object" interface="wl_surface"/>
+ <arg name="icon" type="object" interface="wl_surface" allow-null="true"/>
+ <arg name="serial" type="uint"/>
</request>
<request name="set_selection">
- <arg name="source" type="object" interface="wl_data_source"/>
- <arg name="time" type="uint"/>
+ <arg name="source" type="object" interface="wl_data_source" allow-null="true"/>
+ <arg name="serial" type="uint"/>
</request>
<event name="data_offer">
+ <description summary="introduce a new wl_data_offer">
+ The data_offer event introduces a new wl_data_offer object,
+ which will subsequently be used in either the
+ data_device.enter event (for drag and drop) or the
+ data_device.selection event (for selections). Immediately
+ following the data_device_data_offer event, the new data_offer
+ object will send out data_offer.offer events to describe the
+ mime-types it offers.
+ </description>
+
<arg name="id" type="new_id" interface="wl_data_offer"/>
</event>
<event name="enter">
- <arg name="time" type="uint"/>
+ <description summary="initiate drag and drop session">
+ This event is sent when an active drag-and-drop pointer enters
+ a surface owned by the client. The position of the pointer at
+ enter time is provided by the @x an @y arguments, in surface
+ local coordinates.
+ </description>
+
+ <arg name="serial" type="uint"/>
<arg name="surface" type="object" interface="wl_surface"/>
- <arg name="x" type="int"/>
- <arg name="y" type="int"/>
- <arg name="id" type="object" interface="wl_data_offer"/>
+ <arg name="x" type="fixed"/>
+ <arg name="y" type="fixed"/>
+ <arg name="id" type="object" interface="wl_data_offer" allow-null="true"/>
</event>
- <event name="leave"/>
+ <event name="leave">
+ <description summary="end drag and drop session">
+ This event is sent when the drag-and-drop pointer leaves the
+ surface and the session ends. The client must destroy the
+ wl_data_offer introduced at enter time at this point.
+ </description>
+ </event>
<event name="motion">
+ <description summary="drag and drop session motion">
+ This event is sent when the drag-and-drop pointer moves within
+ the currently focused surface. The new position of the pointer
+ is provided by the @x an @y arguments, in surface local
+ coordinates.
+ </description>
<arg name="time" type="uint"/>
- <arg name="x" type="int"/>
- <arg name="y" type="int"/>
+ <arg name="x" type="fixed"/>
+ <arg name="y" type="fixed"/>
</event>
<event name="drop"/>
<event name="selection">
- <arg name="id" type="object" interface="wl_data_offer"/>
+ <description summary="advertise new selection">
+ The selection event is sent out to notify the client of a new
+ wl_data_offer for the selection for this device. The
+ data_device.data_offer and the data_offer.offer events are
+ sent out immediately before this event to introduce the data
+ offer object. The selection event is sent to a client
+ immediately before receiving keyboard focus and when a new
+ selection is set while the client has keyboard focus. The
+ data_offer is valid until a new data_offer or NULL is received
+ or until the client loses keyboard focus.
+ </description>
+ <arg name="id" type="object" interface="wl_data_offer" allow-null="true"/>
</event>
</interface>
<interface name="wl_data_device_manager" version="1">
+ <description summary="data transfer interface">
+ The wl_data_device_manager is a a singleton global object that
+ provides access to inter-client data transfer mechanisms such as
+ copy and paste and drag and drop. These mechanisms are tied to
+ a wl_seat and this interface lets a client get a wl_data_device
+ corresponding to a wl_seat.
+ </description>
+
<request name="create_data_source">
<arg name="id" type="new_id" interface="wl_data_source"/>
</request>
<request name="get_data_device">
<arg name="id" type="new_id" interface="wl_data_device"/>
- <arg name="input_device" type="object" interface="wl_input_device"/>
+ <arg name="seat" type="object" interface="wl_seat"/>
</request>
</interface>
<interface name="wl_shell" version="1">
- <request name="move">
+ <request name="get_shell_surface">
+ <arg name="id" type="new_id" interface="wl_shell_surface"/>
<arg name="surface" type="object" interface="wl_surface"/>
- <arg name="input_device" type="object" interface="wl_input_device"/>
- <arg name="time" type="uint"/>
+ </request>
+ </interface>
+
+ <interface name="wl_shell_surface" version="1">
+
+ <description summary="desktop style meta data interface">
+ An interface implemented by a wl_surface. On server side the
+ object is automatically destroyed when the related wl_surface is
+ destroyed. On client side, wl_shell_surface_destroy() must be
+ called before destroying the wl_surface object.
+ </description>
+
+ <request name="pong">
+ <description summary="respond to a ping event">
+ A client must respond to a ping event with a pong request or
+ the client may be deemed unresponsive.
+ </description>
+ <arg name="serial" type="uint"/>
+ </request>
+
+ <request name="move">
+ <arg name="seat" type="object" interface="wl_seat"/>
+ <arg name="serial" type="uint"/>
</request>
<enum name="resize">
</enum>
<request name="resize">
- <arg name="surface" type="object" interface="wl_surface"/>
- <arg name="input_device" type="object" interface="wl_input_device"/>
- <arg name="time" type="uint"/>
- <!-- edges is an enum, need to get the values in here -->
+ <arg name="seat" type="object" interface="wl_seat"/>
+ <arg name="serial" type="uint"/>
<arg name="edges" type="uint"/>
</request>
- <!-- Make the surface visible as a toplevel window. -->
<request name="set_toplevel">
- <arg name="surface" type="object" interface="wl_surface"/>
+ <description summary="make the surface a top level surface">
+ Make the surface a toplevel window.
+ </description>
</request>
- <!-- Map the surface relative to an existing surface. The x and y
- arguments specify the locations of the upper left corner of
- the surface relative to the upper left corner of the parent
- surface. The flags argument controls overflow/clipping
- behaviour when the surface would intersect a screen edge,
- panel or such. And possibly whether the offset only
- determines the initial position or if the surface is locked
- to that relative position during moves. -->
+ <enum name="transient">
+ <entry name="inactive" value="0x1" summary="do not set keyboard focus"/>
+ </enum>
+
<request name="set_transient">
- <arg name="surface" type="object" interface="wl_surface"/>
+ <description summary="make the surface a transient surface">
+ Map the surface relative to an existing surface. The x and y
+ arguments specify the locations of the upper left corner of
+ the surface relative to the upper left corner of the parent
+ surface. The flags argument controls overflow/clipping
+ behaviour when the surface would intersect a screen edge,
+ panel or such. And possibly whether the offset only
+ determines the initial position or if the surface is locked to
+ that relative position during moves.
+ </description>
+
<arg name="parent" type="object" interface="wl_surface"/>
<arg name="x" type="int"/>
<arg name="y" type="int"/>
<arg name="flags" type="uint"/>
</request>
- <!-- Map the surface as a fullscreen surface. There are a number
- of options here: on which output? if the surface size doesn't
- match the output size, do we scale, change resolution, or add
- black borders? is that something the client controls? what
- about transient surfaces, do they float on top of the
- fullscreen? what if there's already a fullscreen surface on
- the output, maybe you can only go fullscreen if you're
- active? -->
<request name="set_fullscreen">
- <arg name="surface" type="object" interface="wl_surface"/>
+ <description summary="make the surface a fullscreen surface">
+ Map the surface as a fullscreen surface. If an output parameter is
+ given then the surface will be made fullscreen on that output. If the
+ client does not specify the output then the compositor will apply its
+ policy - usually choosing the output on which the surface has the
+ biggest surface area.
+
+ The client may specify a method to resolve a size conflict between the
+ output size and the surface size - this is provided through the
+ fullscreen_method parameter.
+
+ The framerate parameter is used only when the fullscreen_method is set
+ to "driver", to indicate the preferred framerate. framerate=0 indicates
+ that the app does not care about framerate. The framerate is
+ specified in mHz, that is framerate of 60000 is 60Hz.
+
+ The compositor must reply to this request with a configure event with
+ the dimensions for the output on which the surface will be made fullscreen.
+ </description>
+ <arg name="method" type="uint"/>
+ <arg name="framerate" type="uint"/>
+ <arg name="output" type="object" interface="wl_output" allow-null="true"/>
+ </request>
+
+ <enum name="fullscreen_method">
+ <description summary="different method to set the surface fullscreen">
+ Hints to indicate compositor how to deal with a conflict between the
+ dimensions for the surface and the dimensions of the output. As a hint
+ the compositor is free to ignore this parameter.
+
+ "default" The client has no preference on fullscreen behavior,
+ policies are determined by compositor.
+
+ "scale" The client prefers scaling by the compositor. Scaling would
+ always preserve surface's aspect ratio with surface centered on the
+ output
+
+ "driver" The client wants to switch video mode to the smallest mode
+ that can fit the client buffer. If the sizes do not match the
+ compositor must add black borders.
+
+ "fill" The surface is centered on the output on the screen with no
+ scaling. If the surface is of insufficient size the compositor must
+ add black borders.
+ </description>
+ <entry name="default" value="0"/>
+ <entry name="scale" value="1"/>
+ <entry name="driver" value="2"/>
+ <entry name="fill" value="3"/>
+ </enum>
+
+ <request name="set_popup">
+ <description summary="make the surface a popup surface">
+ Popup surfaces. Will switch an implicit grab into
+ owner-events mode, and grab will continue after the implicit
+ grab ends (button released). Once the implicit grab is over,
+ the popup grab continues until the window is destroyed or a
+ mouse button is pressed in any other clients window. A click
+ in any of the clients surfaces is reported as normal, however,
+ clicks in other clients surfaces will be discarded and trigger
+ the callback.
+
+ TODO: Grab keyboard too, maybe just terminate on any click
+ inside or outside the surface?
+ </description>
+
+ <arg name="seat" type="object" interface="wl_seat"/>
+ <arg name="serial" type="uint"/>
+ <arg name="parent" type="object" interface="wl_surface"/>
+ <arg name="x" type="int"/>
+ <arg name="y" type="int"/>
+ <arg name="flags" type="uint"/>
+ </request>
+
+ <request name="set_maximized">
+ <description summary="make the surface a maximized surface">
+ A request from the client to notify the compositor the maximized
+ operation. The compositor will reply with a configure event telling
+ the expected new surface size. The operation is completed on the
+ next buffer attach to this surface.
+ A maximized client will fill the fullscreen of the output it is bound
+ to, except the panel area. This is the main difference between
+ a maximized shell surface and a fullscreen shell surface.
+ </description>
+ <arg name="output" type="object" interface="wl_output" allow-null="true"/>
</request>
- <!-- The configure event asks the client to resize its surface.
- The size is a hint, in the sense that the client is free to
- ignore it if it doesn't resize, pick a smaller size (to
- satisfy aspect ration or resize in steps of NxM pixels). The
- client is free to dismiss all but the last configure event it
- received. -->
+ <request name="set_title">
+ <description summary="set surface title">
+ </description>
+ <arg name="title" type="string"/>
+ </request>
+
+ <request name="set_class">
+ <description summary="set surface class">
+ The surface class identifies the general class of applications
+ to which the surface belongs. The class is the file name of
+ the applications .desktop file (absolute path if non-standard
+ location).
+ </description>
+ <arg name="class_" type="string"/>
+ </request>
+
+ <event name="ping">
+ <description summary="ping client">
+ Ping a client to check if it is receiving events and sending
+ requests. A client is expected to reply with a pong request.
+ </description>
+ <arg name="serial" type="uint"/>
+ </event>
+
<event name="configure">
- <arg name="time" type="uint"/>
+ <description summary="suggest resize">
+ The configure event asks the client to resize its surface.
+ The size is a hint, in the sense that the client is free to
+ ignore it if it doesn't resize, pick a smaller size (to
+ satisfy aspect ratio or resize in steps of NxM pixels). The
+ client is free to dismiss all but the last configure event it
+ received.
+ </description>
+
<arg name="edges" type="uint"/>
- <arg name="surface" type="object" interface="wl_surface"/>
<arg name="width" type="int"/>
<arg name="height" type="int"/>
</event>
- </interface>
+ <event name="popup_done">
+ <description summary="popup interaction is done">
+ The popup_done event is sent out when a popup grab is broken,
+ that is, when the users clicks a surface that doesn't belong
+ to the client owning the popup surface.
+ </description>
+ </event>
+ </interface>
- <!-- A surface. This is an image that is displayed on the screen.
- It has a location, size and pixel contents. Similar to a window. -->
<interface name="wl_surface" version="1">
- <!-- Deletes the surface and invalidates its object id. -->
- <request name="destroy" type="destructor"/>
+ <description summary="an onscreen surface">
+ A surface. This is an image that is displayed on the screen.
+ It has a location, size and pixel contents.
+ </description>
+
+ <request name="destroy" type="destructor">
+ <description summary="delete surface">
+ Deletes the surface and invalidates its object id.
+ </description>
+ </request>
- <!-- Copy the contents of a buffer into this surface. The x and y
- arguments specify the location of the new buffers upper left
- corner, relative to the old buffers upper left corner. -->
<request name="attach">
- <arg name="buffer" type="object" interface="wl_buffer"/>
+ <description summary="set the surface contents">
+ Set the contents of a buffer into this surface. The x and y
+ arguments specify the location of the new pending buffer's upper
+ left corner, relative to the current buffer's upper left corner. In
+ other words, the x and y, and the width and height of the wl_buffer
+ together define in which directions the surface's size changes.
+
+ Surface contents are double-buffered state, see wl_surface.commit.
+
+ The initial surface contents are void; there is no content.
+ wl_surface.attach assigns the given wl_buffer as the pending wl_buffer.
+ wl_surface.commit applies the pending wl_buffer as the new
+ surface contents, and the size of the surface becomes the size of
+ the wl_buffer. The wl_buffer is also kept as pending, until
+ changed by wl_surface.attach or the wl_buffer is destroyed.
+
+ Committing a pending wl_buffer allows the compositor to read the
+ pixels in the wl_buffer. The compositor may access the pixels at any
+ time after the wl_surface.commit request. When the compositor will
+ not access the pixels anymore, it will send the wl_buffer.release
+ event. Only after receiving wl_buffer.release, the client may re-use
+ the wl_buffer. A wl_buffer, that has been attached and then replaced
+ by another attach instead of committed, will not receive a release
+ event, and is not used by the compositor.
+
+ Destroying the wl_buffer after wl_buffer.release does not change the
+ surface contents, even if the wl_buffer is still pending for the
+ next commit. In such case, the next commit does not change the
+ surface contents. However, if the client destroys the wl_buffer
+ before receiving wl_buffer.release, the surface contents become
+ undefined immediately.
+
+ Only if wl_surface.attach is sent with a nil wl_buffer, the
+ following wl_surface.commit will remove the surface content.
+ </description>
+
+ <arg name="buffer" type="object" interface="wl_buffer" allow-null="true"/>
<arg name="x" type="int"/>
<arg name="y" type="int"/>
</request>
- <!-- After attaching a new buffer, this request is used to
- describe the regions where the new buffer is different from
- the previous buffer and needs to be repainted. Coordinates
- are relative to the new buffer. -->
<request name="damage">
+ <description summary="mark part of the surface damaged">
+ This request is used to describe the regions where the pending
+ buffer (or if pending buffer is none, the current buffer as updated
+ in-place) on the next wl_surface.commit will be different from the
+ current buffer, and needs to be repainted. The pending buffer can be
+ set by wl_surface.attach. The compositor ignores the parts of the
+ damage that fall outside of the surface.
+
+ Damage is double-buffered state, see wl_surface.commit.
+
+ The initial value for pending damage is empty: no damage.
+ wl_surface.damage adds pending damage: the new pending damage is the
+ union of old pending damage and the given rectangle.
+ wl_surface.commit assigns pending damage as the current damage, and
+ clears pending damage. The server will clear the current damage as
+ it repaints the surface.
+ </description>
+
<arg name="x" type="int"/>
<arg name="y" type="int"/>
<arg name="width" type="int"/>
<arg name="height" type="int"/>
</request>
- <!-- Request notification when the next frame is displayed.
- Useful for throttling redrawing operations, and driving
- animations. The notification will only be posted for one
- frame unless requested again. -->
<request name="frame">
+ <description summary="request repaint feedback">
+ Request notification when the next frame is displayed. Useful
+ for throttling redrawing operations, and driving animations.
+ The frame request will take effect on the next wl_surface.commit.
+ The notification will only be posted for one frame unless
+ requested again.
+
+ A server should avoid signalling the frame callbacks if the
+ surface is not visible in any way, e.g. the surface is off-screen,
+ or completely obscured by other opaque surfaces.
+
+ A client can request a frame callback even without an attach,
+ damage, or any other state changes. wl_surface.commit triggers a
+ display update, so the callback event will arrive after the next
+ output refresh where the surface is visible.
+ </description>
+
<arg name="callback" type="new_id" interface="wl_callback"/>
</request>
+ <request name="set_opaque_region">
+ <description summary="set opaque region">
+ This request sets the region of the surface that contains
+ opaque content. The opaque region is an optimization hint for
+ the compositor that lets it optimize out redrawing of content
+ behind opaque regions. Setting an opaque region is not
+ required for correct behaviour, but marking transparent
+ content as opaque will result in repaint artifacts.
+ The compositor ignores the parts of the opaque region that fall
+ outside of the surface.
+
+ Opaque region is double-buffered state, see wl_surface.commit.
+
+ wl_surface.set_opaque_region changes the pending opaque region.
+ wl_surface.commit copies the pending region to the current region.
+ Otherwise the pending and current regions are never changed.
+
+ The initial value for opaque region is empty. Setting the pending
+ opaque region has copy semantics, and the wl_region object can be
+ destroyed immediately. A nil wl_region causes the pending opaque
+ region to be set to empty.
+ </description>
+
+ <arg name="region" type="object" interface="wl_region" allow-null="true"/>
+ </request>
+
+ <request name="set_input_region">
+ <description summary="set input region">
+ This request sets the region of the surface that can receive
+ pointer and touch events. Input events happening outside of
+ this region will try the next surface in the server surface
+ stack. The compositor ignores the parts of the input region that
+ fall outside of the surface.
+
+ Input region is double-buffered state, see wl_surface.commit.
+
+ wl_surface.set_input_region changes the pending input region.
+ wl_surface.commit copies the pending region to the current region.
+ Otherwise the pending and current regions are never changed,
+ except cursor and icon surfaces are special cases, see
+ wl_pointer.set_cursor and wl_data_device.start_drag.
+
+ The initial value for input region is infinite. That means the whole
+ surface will accept input. Setting the pending input region has copy
+ semantics, and the wl_region object can be destroyed immediately. A
+ nil wl_region causes the input region to be set to infinite.
+ </description>
+
+ <arg name="region" type="object" interface="wl_region" allow-null="true"/>
+ </request>
+
+ <request name="commit">
+ <description summary="commit pending surface state">
+ Surface state (input, opaque, and damage regions, attached buffers,
+ etc.) is double-buffered. Protocol requests modify the pending
+ state, as opposed to current state in use by the compositor. Commit
+ request atomically applies all pending state, replacing the current
+ state. After commit, the new pending state is as documented for each
+ related request.
+
+ On commit, a pending wl_buffer is applied first, all other state
+ second. This means that all coordinates in double-buffered state are
+ relative to the new wl_buffer coming into use, except for
+ wl_surface.attach itself. If the pending wl_buffer is none, the
+ coordinates are relative to the current surface contents.
+
+ All requests that need a commit to become effective are documented
+ to affect double-buffered state.
+
+ Other interfaces may add further double-buffered surface state.
+ </description>
+ </request>
+
+ <event name="enter">
+ <description summary="surface enters an output">
+ This is emitted whenever a surface's creation, movement, or resizing
+ results in some part of it being within the scanout region of an
+ output.
+ </description>
+ <arg name="output" type="object" interface="wl_output"/>
+ </event>
+
+ <event name="leave">
+ <description summary="surface leaves an output">
+ This is emitted whenever a surface's creation, movement, or resizing
+ results in it no longer having any part of it within the scanout region
+ of an output.
+ </description>
+ <arg name="output" type="object" interface="wl_output"/>
+ </event>
</interface>
+ <interface name="wl_seat" version="1">
+ <description summary="seat">
+ A group of keyboards, pointer (mice, for example) and touch
+ devices . This object is published as a global during start up,
+ or when such a device is hot plugged. A seat typically has a
+ pointer and maintains a keyboard_focus and a pointer_focus.
+ </description>
+
+ <enum name="capability">
+ <description summary="seat capability bitmask">
+ This is a bitmask of capabilities this seat has; if a member is
+ set, then it is present on the seat.
+ </description>
+ <entry name="pointer" value="1" summary="wl_pointer"/>
+ <entry name="keyboard" value="2" summary="wl_keyboard"/>
+ <entry name="touch" value="4" summary="wl_touch"/>
+ </enum>
- <!-- A group of keyboards and pointer devices (mice, for
- example). This object is published as a global during start up,
- or when such a device is hot plugged. A input_device group
- typically has a pointer and maintains a keyboard_focus and a
- pointer_focus. -->
- <interface name="wl_input_device" version="1">
- <!-- Set the pointer's image. This request only takes effect if
- the pointer focus for this device is one of the requesting
- clients surfaces. -->
- <request name="attach">
- <arg name="time" type="uint"/>
- <arg name="buffer" type="object" interface="wl_buffer"/>
+
+ <event name="capabilities">
+ <description summary="seat capabilities changed">
+ This is emitted whenever a seat gains or loses the pointer,
+ keyboard or touch capabilities. The argument is a wl_seat_caps_mask
+ enum containing the complete set of capabilities this seat has.
+ </description>
+ <arg name="capabilities" type="uint"/>
+ </event>
+
+ <request name="get_pointer">
+ <description summary="return pointer object">
+ The ID provided will be initialized to the wl_pointer interface
+ for this seat.
+ </description>
+ <arg name="id" type="new_id" interface="wl_pointer"/>
+ </request>
+
+ <request name="get_keyboard">
+ <description summary="return pointer object">
+ The ID provided will be initialized to the wl_keyboard interface
+ for this seat.
+ </description>
+ <arg name="id" type="new_id" interface="wl_keyboard"/>
+ </request>
+
+ <request name="get_touch">
+ <description summary="return pointer object">
+ The ID provided will be initialized to the wl_touch interface
+ for this seat.
+ </description>
+ <arg name="id" type="new_id" interface="wl_touch"/>
+ </request>
+ </interface>
+
+ <interface name="wl_pointer" version="1">
+ <request name="set_cursor">
+ <description summary="set the pointer surface">
+ Set the pointer surface, i.e., the surface that contains the
+ pointer image (cursor). This request only takes effect if the pointer
+ focus for this device is one of the requesting client's surfaces
+ or the surface parameter is the current pointer surface. If
+ there was a previous surface set with this request it is
+ replaced. If surface is NULL, the pointer image is hidden.
+
+ The parameters hotspot_x and hotspot_y define the position of
+ the pointer surface relative to the pointer location. Its
+ top-left corner is always at (x, y) - (hotspot_x, hotspot_y),
+ where (x, y) are the coordinates of the pointer location.
+
+ On surface.attach requests to the pointer surface, hotspot_x
+ and hotspot_y are decremented by the x and y parameters
+ passed to the request. Attach must be confirmed by
+ wl_surface.commit as usual.
+
+ The hotspot can also be updated by passing the currently set
+ pointer surface to this request with new values for hotspot_x
+ and hotspot_y.
+
+ The current and pending input regions of the wl_surface are
+ cleared, and wl_surface.set_input_region is ignored until the
+ wl_surface is no longer used as the cursor. When the use as a
+ cursor ends, the current and pending input regions become
+ undefined, and the wl_surface is unmapped.
+ </description>
+
+ <arg name="serial" type="uint"/>
+ <arg name="surface" type="object" interface="wl_surface" allow-null="true"/>
<arg name="hotspot_x" type="int"/>
<arg name="hotspot_y" type="int"/>
</request>
- <!-- Notification of pointer location change.
- x,y are the absolute location on the screen.
- surface_[xy] are the location relative to the focused surface. -->
+ <event name="enter">
+ <description summary="enter event">
+ Notification that this seat's pointer is focused on a certain
+ surface. When an seat's focus enters a surface, the pointer image
+ is undefined and a client should respond to this event by setting
+ an appropriate pointer image.
+ </description>
+
+ <arg name="serial" type="uint"/>
+ <arg name="surface" type="object" interface="wl_surface"/>
+ <arg name="surface_x" type="fixed"/>
+ <arg name="surface_y" type="fixed"/>
+ </event>
+
+ <event name="leave">
+ <description summary="leave event">
+ </description>
+ <arg name="serial" type="uint"/>
+ <arg name="surface" type="object" interface="wl_surface"/>
+ </event>
+
<event name="motion">
+ <description summary="pointer motion event">
+ Notification of pointer location change. The arguments surface_[xy]
+ are the location relative to the focused surface.
+ </description>
+
<arg name="time" type="uint"/>
- <arg name="x" type="int"/>
- <arg name="y" type="int"/>
- <arg name="surface_x" type="int"/>
- <arg name="surface_y" type="int"/>
+ <arg name="surface_x" type="fixed"/>
+ <arg name="surface_y" type="fixed"/>
</event>
- <!-- Mouse button click and release notifications. The location
- of the click is given by the last motion or pointer_focus
- event. -->
+ <enum name="button_state">
+ <description summary="physical button state">
+ Describes the physical state of a button which provoked the button
+ event.
+ </description>
+ <entry name="released" value="0" summary="button is not pressed"/>
+ <entry name="pressed" value="1" summary="button is pressed"/>
+ </enum>
+
<event name="button">
+ <description summary="pointer button event">
+ Mouse button click and release notifications. The location
+ of the click is given by the last motion or pointer_focus event.
+ </description>
+
+ <arg name="serial" type="uint"/>
<arg name="time" type="uint"/>
<arg name="button" type="uint"/>
<arg name="state" type="uint"/>
</event>
- <!-- Keyboard press. -->
- <event name="key">
+ <enum name="axis">
+ <description summary="axis types"/>
+ <entry name="vertical_scroll" value="0"/>
+ <entry name="horizontal_scroll" value="1"/>
+ </enum>
+
+ <event name="axis">
+ <description summary="axis event">
+ Scroll and other axis notifications.
+
+ For scroll events (vertical and horizontal scroll axes), the
+ value parameter is the length of a vector along the specified
+ axis in a coordinate space identical to those of motion events,
+ representing a relative movement along the specified axis.
+
+ For devices that support movements non-parallel to axes multiple
+ axis events will be emitted.
+
+ When applicable, for example for touch pads, the server can
+ choose to emit scroll events where the motion vector is
+ equivalent to a motion event vector.
+
+ When applicable, clients can transform its view relative to the
+ scroll distance.
+ </description>
+
<arg name="time" type="uint"/>
- <arg name="key" type="uint"/>
- <arg name="state" type="uint"/>
+ <arg name="axis" type="uint"/>
+ <arg name="value" type="fixed"/>
</event>
+ </interface>
- <!-- Notification that this input device's pointer is focused on
- certain surface. When an input_device enters a surface, the
- pointer image is undefined and a client should respond to
- this event by setting an apropriate pointer image. -->
- <event name="pointer_focus">
- <arg name="time" type="uint"/>
- <arg name="surface" type="object" interface="wl_surface"/>
- <arg name="x" type="int"/>
- <arg name="y" type="int"/>
- <arg name="surface_x" type="int"/>
- <arg name="surface_y" type="int"/>
+ <interface name="wl_keyboard" version="1">
+ <description summary="keyboard input device">
+ </description>
+
+ <enum name="keymap_format">
+ <description summary="keyboard mapping format">
+ This enum specifies the format of the keymap provided to the client
+ with the wl_keyboard::keymap event.
+ </description>
+ <entry name="xkb_v1" value="1" description="libxkbcommon compatible"/>
+ </enum>
+
+ <event name="keymap">
+ <description summary="keyboard mapping">
+ This event provides a file descriptor to the client which can be
+ memory-mapped to provide a keyboard mapping description.
+ </description>
+ <arg name="format" type="uint"/>
+ <arg name="fd" type="fd"/>
+ <arg name="size" type="uint"/>
</event>
- <event name="keyboard_focus">
- <arg name="time" type="uint"/>
+ <event name="enter">
+ <arg name="serial" type="uint"/>
<arg name="surface" type="object" interface="wl_surface"/>
<arg name="keys" type="array"/>
</event>
- <event name="touch_down">
+ <event name="leave">
+ <arg name="serial" type="uint"/>
+ <arg name="surface" type="object" interface="wl_surface"/>
+ </event>
+
+ <enum name="key_state">
+ <description summary="physical key state">
+ Describes the physical state of a key which provoked the key event.
+ </description>
+ <entry name="released" value="0" summary="key is not pressed"/>
+ <entry name="pressed" value="1" summary="key is pressed"/>
+ </enum>
+
+ <event name="key">
+ <description summary="key event">
+ A key was pressed or released.
+ </description>
+
+ <arg name="serial" type="uint"/>
+ <arg name="time" type="uint"/>
+ <arg name="key" type="uint"/>
+ <arg name="state" type="uint"/>
+ </event>
+
+ <event name="modifiers">
+ <description summary="modifier and group state">
+ Notifies clients that the modifier and/or group state has
+ changed, and it should update its local state.
+ </description>
+
+ <arg name="serial" type="uint"/>
+ <arg name="mods_depressed" type="uint"/>
+ <arg name="mods_latched" type="uint"/>
+ <arg name="mods_locked" type="uint"/>
+ <arg name="group" type="uint"/>
+ </event>
+ </interface>
+
+ <interface name="wl_touch" version="1">
+ <description summary="touch screen input device">
+ </description>
+
+ <event name="down">
+ <arg name="serial" type="uint"/>
<arg name="time" type="uint"/>
+ <arg name="surface" type="object" interface="wl_surface"/>
<arg name="id" type="int" />
- <arg name="x" type="int" />
- <arg name="y" type="int" />
+ <arg name="x" type="fixed" />
+ <arg name="y" type="fixed" />
</event>
- <event name="touch_up">
+ <event name="up">
+ <arg name="serial" type="uint"/>
<arg name="time" type="uint"/>
<arg name="id" type="int" />
</event>
- <event name="touch_motion">
+ <event name="motion">
<arg name="time" type="uint"/>
<arg name="id" type="int" />
- <arg name="x" type="int" />
- <arg name="y" type="int" />
+ <arg name="x" type="fixed" />
+ <arg name="y" type="fixed" />
</event>
- <!-- Indicates the end of a contact point list. -->
- <event name="touch_frame"/>
+ <event name="frame">
+ <description summary="end of touch frame event">
+ Indicates the end of a contact point list.
+ </description>
+ </event>
- <!-- Sent if the compositor decides the touch stream is a global
- gesture. No further events are sent to the clients from that
- particular gesture. -->
- <event name="touch_cancel"/>
+ <event name="cancel">
+ <description summary="touch session cancelled">
+ Sent if the compositor decides the touch stream is a global
+ gesture. No further events are sent to the clients from that
+ particular gesture.
+ </description>
+ </event>
</interface>
- <!-- An output describes part of the compositor geometry. The
- compositor work in the 'compositor coordinate system' and an
- output corresponds to rectangular area in that space that is
- actually visible. This typically corresponds to a monitor that
- displays part of the compositor space. This object is
- published as global during start up, or when a screen is hot
- plugged. -->
<interface name="wl_output" version="1">
+ <description summary="compositor output region">
+ An output describes part of the compositor geometry. The
+ compositor work in the 'compositor coordinate system' and an
+ output corresponds to rectangular area in that space that is
+ actually visible. This typically corresponds to a monitor that
+ displays part of the compositor space. This object is published
+ as global during start up, or when a screen is hot plugged.
+ </description>
<enum name="subpixel">
<entry name="unknown" value="0"/>
<entry name="vertical_bgr" value="5"/>
</enum>
+ <enum name="transform">
+ <description summary="transform from framebuffer to output">
+ This describes the transform that a compositor will apply to a
+ surface to compensate for the rotation or mirroring of an
+ output device.
+
+ The flipped values correspond to an initial flip around a
+ vertical axis followed by rotation.
+
+ The purpose is mainly to allow clients render accordingly and
+ tell the compositor, so that for fullscreen surfaces, the
+ compositor will still be able to scan out directly from client
+ surfaces.
+ </description>
+
+ <entry name="normal" value="0"/>
+ <entry name="90" value="1"/>
+ <entry name="180" value="2"/>
+ <entry name="270" value="3"/>
+ <entry name="flipped" value="4"/>
+ <entry name="flipped_90" value="5"/>
+ <entry name="flipped_180" value="6"/>
+ <entry name="flipped_270" value="7"/>
+ </enum>
+
<event name="geometry">
- <arg name="x" type="int"/>
- <arg name="y" type="int"/>
- <arg name="physical_width" type="int"/>
- <arg name="physical_height" type="int"/>
- <arg name="subpixel" type="int"/>
- <arg name="make" type="string"/>
- <arg name="model" type="string"/>
+ <description summary="properties of the output"/>
+ <arg name="x" type="int"
+ summary="x position within the global compositor space"/>
+ <arg name="y" type="int"
+ summary="y position within the global compositor space"/>
+ <arg name="physical_width" type="int"
+ summary="width in millimeters of the output"/>
+ <arg name="physical_height" type="int"
+ summary="height in millimeters of the output"/>
+ <arg name="subpixel" type="int"
+ summary="subpixel orientation of the output"/>
+ <arg name="make" type="string"
+ summary="textual description of the manufacturer"/>
+ <arg name="model" type="string"
+ summary="textual description of the model"/>
+ <arg name="transform" type="int"
+ summary="transform that maps framebuffer to output"/>
</event>
- <!-- Values for the flags bitfield of the mode event. -->
<enum name="mode">
- <entry name="current" value="0x1"/>
- <entry name="preferred" value="0x2"/>
+ <description summary="values for the flags bitfield in the mode event"/>
+ <entry name="current" value="0x1"
+ summary="indicates this is the current mode"/>
+ <entry name="preferred" value="0x2"
+ summary="indicates this is the preferred mode"/>
</enum>
<event name="mode">
- <arg name="flags" type="uint"/>
+ <description summary="advertise available modes for the output">
+ The mode event describes an available mode for the output.
+ The event is sent when binding to the output object and there
+ will always be one mode, the current mode. The event is sent
+ again if an output changes mode, for the mode that is now
+ current. In other words, the current mode is always the last
+ mode that was received with the current flag set.
+ </description>
+ <arg name="flags" type="uint" summary="mask of wl_output_mode flags"/>
+ <arg name="width" type="int" summary="width of the mode in pixels"/>
+ <arg name="height" type="int" summary="height of the mode in pixels"/>
+ <arg name="refresh" type="int" summary="vertical refresh rate in mHz"/>
+ </event>
+ </interface>
+
+ <interface name="wl_region" version="1">
+ <description summary="region interface">
+ Region.
+ </description>
+
+ <request name="destroy" type="destructor">
+ <description summary="destroy region">
+ Destroy the region. This will invalidate the object id.
+ </description>
+ </request>
+
+ <request name="add">
+ <description summary="add rectangle to region">
+ Add the specified rectangle to the region
+ </description>
+
+ <arg name="x" type="int"/>
+ <arg name="y" type="int"/>
<arg name="width" type="int"/>
<arg name="height" type="int"/>
- <arg name="refresh" type="int"/>
- </event>
+ </request>
+
+ <request name="subtract">
+ <description summary="subtract rectangle from region">
+ Subtract the specified rectangle from the region
+ </description>
+
+ <arg name="x" type="int"/>
+ <arg name="y" type="int"/>
+ <arg name="width" type="int"/>
+ <arg name="height" type="int"/>
+ </request>
+
</interface>
</protocol>