/* Definitions for data structures and routines for the regular
expression library.
- Copyright (C) 1985,1989-93,1995-98,2000,2001,2002,2003,2005,2006
- Free Software Foundation, Inc.
+ Copyright (C) 1985, 1989-2015 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
- License along with the GNU C Library; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
- 02111-1307 USA. */
+ License along with the GNU C Library; if not, see
+ <http://www.gnu.org/licenses/>. */
#ifndef _REGEX_H
#define _REGEX_H 1
add or remove a bit, only one other definition need change. */
typedef unsigned long int reg_syntax_t;
+#ifdef __USE_GNU
/* If this bit is not set, then \ inside a bracket expression is literal.
If set, then such a \ quotes the following character. */
-#define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1)
+# define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1)
/* If this bit is not set, then + and ? are operators, and \+ and \? are
literals.
If set, then \+ and \? are operators and + and ? are literals. */
-#define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1)
+# define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1)
/* If this bit is set, then character classes are supported. They are:
[:alpha:], [:upper:], [:lower:], [:digit:], [:alnum:], [:xdigit:],
[:space:], [:print:], [:punct:], [:graph:], and [:cntrl:].
If not set, then character classes are not supported. */
-#define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1)
+# define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1)
/* If this bit is set, then ^ and $ are always anchors (outside bracket
expressions, of course).
If this bit is not set, then it depends:
- ^ is an anchor if it is at the beginning of a regular
- expression or after an open-group or an alternation operator;
- $ is an anchor if it is at the end of a regular expression, or
- before a close-group or an alternation operator.
+ ^ is an anchor if it is at the beginning of a regular
+ expression or after an open-group or an alternation operator;
+ $ is an anchor if it is at the end of a regular expression, or
+ before a close-group or an alternation operator.
This bit could be (re)combined with RE_CONTEXT_INDEP_OPS, because
POSIX draft 11.2 says that * etc. in leading positions is undefined.
We already implemented a previous draft which made those constructs
invalid, though, so we haven't changed the code back. */
-#define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1)
+# define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1)
/* If this bit is set, then special characters are always special
regardless of where they are in the pattern.
some contexts; otherwise they are ordinary. Specifically,
* + ? and intervals are only special when not after the beginning,
open-group, or alternation operator. */
-#define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1)
+# define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1)
/* If this bit is set, then *, +, ?, and { cannot be first in an re or
immediately after an alternation or begin-group operator. */
-#define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1)
+# define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1)
/* If this bit is set, then . matches newline.
If not set, then it doesn't. */
-#define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1)
+# define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1)
/* If this bit is set, then . doesn't match NUL.
If not set, then it does. */
-#define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1)
+# define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1)
/* If this bit is set, nonmatching lists [^...] do not match newline.
If not set, they do. */
-#define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1)
+# define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1)
/* If this bit is set, either \{...\} or {...} defines an
interval, depending on RE_NO_BK_BRACES.
If not set, \{, \}, {, and } are literals. */
-#define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1)
+# define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1)
/* If this bit is set, +, ? and | aren't recognized as operators.
If not set, they are. */
-#define RE_LIMITED_OPS (RE_INTERVALS << 1)
+# define RE_LIMITED_OPS (RE_INTERVALS << 1)
/* If this bit is set, newline is an alternation operator.
If not set, newline is literal. */
-#define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1)
+# define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1)
/* If this bit is set, then `{...}' defines an interval, and \{ and \}
are literals.
If not set, then `\{...\}' defines an interval. */
-#define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1)
+# define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1)
/* If this bit is set, (...) defines a group, and \( and \) are literals.
If not set, \(...\) defines a group, and ( and ) are literals. */
-#define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1)
+# define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1)
/* If this bit is set, then \<digit> matches <digit>.
If not set, then \<digit> is a back-reference. */
-#define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1)
+# define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1)
/* If this bit is set, then | is an alternation operator, and \| is literal.
If not set, then \| is an alternation operator, and | is literal. */
-#define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1)
+# define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1)
/* If this bit is set, then an ending range point collating higher
than the starting range point, as in [z-a], is invalid.
If not set, then when ending range point collates higher than the
starting range point, the range is ignored. */
-#define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1)
+# define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1)
/* If this bit is set, then an unmatched ) is ordinary.
If not set, then an unmatched ) is invalid. */
-#define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1)
+# define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1)
/* If this bit is set, succeed as soon as we match the whole pattern,
without further backtracking. */
-#define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1)
+# define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1)
/* If this bit is set, do not process the GNU regex operators.
If not set, then the GNU regex operators are recognized. */
-#define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1)
+# define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1)
/* If this bit is set, turn on internal regex debugging.
If not set, and debugging was on, turn it off.
We define this bit always, so that all that's needed to turn on
debugging is to recompile regex.c; the calling code can always have
this bit set, and it won't affect anything in the normal case. */
-#define RE_DEBUG (RE_NO_GNU_OPS << 1)
+# define RE_DEBUG (RE_NO_GNU_OPS << 1)
/* If this bit is set, a syntactically invalid interval is treated as
a string of ordinary characters. For example, the ERE 'a{1' is
treated as 'a\{1'. */
-#define RE_INVALID_INTERVAL_ORD (RE_DEBUG << 1)
+# define RE_INVALID_INTERVAL_ORD (RE_DEBUG << 1)
/* If this bit is set, then ignore case when matching.
If not set, then case is significant. */
-#define RE_ICASE (RE_INVALID_INTERVAL_ORD << 1)
+# define RE_ICASE (RE_INVALID_INTERVAL_ORD << 1)
/* This bit is used internally like RE_CONTEXT_INDEP_ANCHORS but only
for ^, because it is difficult to scan the regex backwards to find
whether ^ should be special. */
-#define RE_CARET_ANCHORS_HERE (RE_ICASE << 1)
+# define RE_CARET_ANCHORS_HERE (RE_ICASE << 1)
/* If this bit is set, then \{ cannot be first in an bre or
immediately after an alternation or begin-group operator. */
-#define RE_CONTEXT_INVALID_DUP (RE_CARET_ANCHORS_HERE << 1)
+# define RE_CONTEXT_INVALID_DUP (RE_CARET_ANCHORS_HERE << 1)
/* If this bit is set, then no_sub will be set to 1 during
re_compile_pattern. */
-#define RE_NO_SUB (RE_CONTEXT_INVALID_DUP << 1)
+# define RE_NO_SUB (RE_CONTEXT_INVALID_DUP << 1)
+#endif
/* This global variable defines the particular regexp syntax to use (for
some interfaces). When a regexp is compiled, the syntax used is
already-compiled regexps. */
extern reg_syntax_t re_syntax_options;
\f
+#ifdef __USE_GNU
/* Define combinations of the above bits for the standard possibilities.
(The [[[ comments delimit what gets put into the Texinfo file, so
don't delete them!) */
| RE_NO_BK_PARENS | RE_NO_BK_REFS \
| RE_NO_BK_VBAR | RE_NO_EMPTY_RANGES \
| RE_DOT_NEWLINE | RE_CONTEXT_INDEP_ANCHORS \
+ | RE_CHAR_CLASSES \
| RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS)
#define RE_SYNTAX_GNU_AWK \
- ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DEBUG) \
- & ~(RE_DOT_NOT_NULL | RE_INTERVALS | RE_CONTEXT_INDEP_OPS \
- | RE_CONTEXT_INVALID_OPS ))
+ ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS \
+ | RE_INVALID_INTERVAL_ORD) \
+ & ~(RE_DOT_NOT_NULL | RE_CONTEXT_INDEP_OPS \
+ | RE_CONTEXT_INVALID_OPS ))
#define RE_SYNTAX_POSIX_AWK \
(RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS \
- | RE_INTERVALS | RE_NO_GNU_OPS)
+ | RE_INTERVALS | RE_NO_GNU_OPS \
+ | RE_INVALID_INTERVAL_ORD)
#define RE_SYNTAX_GREP \
(RE_BK_PLUS_QM | RE_CHAR_CLASSES \
/* Maximum number of duplicates an interval can allow. Some systems
(erroneously) define this in other header files, but we want our
value, so remove any previous define. */
-#ifdef RE_DUP_MAX
-# undef RE_DUP_MAX
-#endif
+# ifdef RE_DUP_MAX
+# undef RE_DUP_MAX
+# endif
/* If sizeof(int) == 2, then ((1 << 15) - 1) overflows. */
-#define RE_DUP_MAX (0x7fff)
+# define RE_DUP_MAX (0x7fff)
+#endif
/* POSIX `cflags' bits (i.e., information for `regcomp'). */
`re_error_msg' table in regex.c. */
typedef enum
{
-#if defined _XOPEN_SOURCE || defined __USE_UNIX98
+#if defined _XOPEN_SOURCE || defined __USE_XOPEN2K
REG_ENOSYS = -1, /* This will never happen for this implementation. */
#endif
\f
/* This data structure represents a compiled pattern. Before calling
the pattern compiler, the fields `buffer', `allocated', `fastmap',
- `translate', and `no_sub' can be set. After the pattern has been
- compiled, the `re_nsub' field is available. All other fields are
- private to the regex routines. */
+ and `translate' can be set. After the pattern has been compiled,
+ the fields `re_nsub', `not_bol' and `not_eol' are available. All
+ other fields are private to the regex routines. */
#ifndef RE_TRANSLATE_TYPE
-# define RE_TRANSLATE_TYPE unsigned char *
+# define __RE_TRANSLATE_TYPE unsigned char *
+# ifdef __USE_GNU
+# define RE_TRANSLATE_TYPE __RE_TRANSLATE_TYPE
+# endif
+#endif
+
+#ifdef __USE_GNU
+# define __REPB_PREFIX(name) name
+#else
+# define __REPB_PREFIX(name) __##name
#endif
struct re_pattern_buffer
/* Space that holds the compiled pattern. It is declared as
`unsigned char *' because its elements are sometimes used as
array indexes. */
- unsigned char *buffer;
+ unsigned char *__REPB_PREFIX(buffer);
/* Number of bytes to which `buffer' points. */
- unsigned long int allocated;
+ unsigned long int __REPB_PREFIX(allocated);
/* Number of bytes actually used in `buffer'. */
- unsigned long int used;
+ unsigned long int __REPB_PREFIX(used);
/* Syntax setting with which the pattern was compiled. */
- reg_syntax_t syntax;
+ reg_syntax_t __REPB_PREFIX(syntax);
/* Pointer to a fastmap, if any, otherwise zero. re_search uses the
fastmap, if there is one, to skip over impossible starting points
for matches. */
- char *fastmap;
+ char *__REPB_PREFIX(fastmap);
/* Either a translate table to apply to all characters before
comparing them, or zero for no translation. The translation is
applied to a pattern when it is compiled and to a string when it
is matched. */
- RE_TRANSLATE_TYPE translate;
+ __RE_TRANSLATE_TYPE __REPB_PREFIX(translate);
/* Number of subexpressions found by the compiler. */
size_t re_nsub;
Well, in truth it's used only in `re_search_2', to see whether or
not we should use the fastmap, so we don't set this absolutely
perfectly; see `re_compile_fastmap' (the `duplicate' case). */
- unsigned can_be_null : 1;
+ unsigned __REPB_PREFIX(can_be_null) : 1;
/* If REGS_UNALLOCATED, allocate space in the `regs' structure
for `max (RE_NREGS, re_nsub + 1)' groups.
If REGS_REALLOCATE, reallocate space if necessary.
If REGS_FIXED, use what's there. */
-#define REGS_UNALLOCATED 0
-#define REGS_REALLOCATE 1
-#define REGS_FIXED 2
- unsigned regs_allocated : 2;
+#ifdef __USE_GNU
+# define REGS_UNALLOCATED 0
+# define REGS_REALLOCATE 1
+# define REGS_FIXED 2
+#endif
+ unsigned __REPB_PREFIX(regs_allocated) : 2;
/* Set to zero when `regex_compile' compiles a pattern; set to one
by `re_compile_fastmap' if it updates the fastmap. */
- unsigned fastmap_accurate : 1;
+ unsigned __REPB_PREFIX(fastmap_accurate) : 1;
/* If set, `re_match_2' does not return information about
subexpressions. */
- unsigned no_sub : 1;
+ unsigned __REPB_PREFIX(no_sub) : 1;
/* If set, a beginning-of-line anchor doesn't match at the beginning
of the string. */
- unsigned not_bol : 1;
+ unsigned __REPB_PREFIX(not_bol) : 1;
/* Similarly for an end-of-line anchor. */
- unsigned not_eol : 1;
+ unsigned __REPB_PREFIX(not_eol) : 1;
/* If true, an anchor at a newline matches. */
- unsigned newline_anchor : 1;
+ unsigned __REPB_PREFIX(newline_anchor) : 1;
};
typedef struct re_pattern_buffer regex_t;
typedef int regoff_t;
+#ifdef __USE_GNU
/* This is the structure we store register match data in. See
regex.texinfo for a full description of what registers match. */
struct re_registers
/* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer,
`re_match_2' returns information about at least this many registers
the first time a `regs' structure is passed. */
-#ifndef RE_NREGS
-# define RE_NREGS 30
+# ifndef RE_NREGS
+# define RE_NREGS 30
+# endif
#endif
\f
/* Declarations for routines. */
+#ifdef __USE_GNU
/* Sets the current default syntax to SYNTAX, and return the old syntax.
You can also simply assign to the `re_syntax_options' variable. */
extern reg_syntax_t re_set_syntax (reg_syntax_t __syntax);
/* Compile the regular expression PATTERN, with length LENGTH
and syntax given by the global `re_syntax_options', into the buffer
- BUFFER. Return NULL if successful, and an error string if not. */
+ BUFFER. Return NULL if successful, and an error string if not.
+
+ To free the allocated storage, you must call `regfree' on BUFFER.
+ Note that the translate table must either have been initialised by
+ `regcomp', with a malloc'ed value, or set to NULL before calling
+ `regfree'. */
extern const char *re_compile_pattern (const char *__pattern, size_t __length,
struct re_pattern_buffer *__buffer);
struct re_registers *__regs,
unsigned int __num_regs,
regoff_t *__starts, regoff_t *__ends);
+#endif /* Use GNU */
-#if defined _REGEX_RE_COMP || defined _LIBC
+#if defined _REGEX_RE_COMP || (defined _LIBC && defined __USE_MISC)
# ifndef _CRAY
/* 4.2 bsd compatibility. */
extern char *re_comp (const char *);
projects / platform / upstream / glibc.git / blobdiff