msgstr ""
"Project-Id-Version: glib 2.31.21\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2012-08-21 19:16+0800\n"
-"PO-Revision-Date: 2012-08-21 19:16+0800\n"
+"POT-Creation-Date: 2013-08-03 21:06+0800\n"
+"PO-Revision-Date: 2013-08-03 21:06+0800\n"
"Last-Translator: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>\n"
"Language-Team: Chinese (Hong Kong) <community@linuxhall.org>\n"
"Language: zh_TW\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Poedit 1.5.5\n"
-#: ../gio/gbufferedinputstream.c:427 ../gio/gbufferedinputstream.c:508
-#: ../gio/ginputstream.c:185 ../gio/ginputstream.c:376
-#: ../gio/ginputstream.c:615 ../gio/ginputstream.c:850
-#: ../gio/goutputstream.c:203 ../gio/goutputstream.c:800
+#: ../gio/gbufferedinputstream.c:424 ../gio/gbufferedinputstream.c:503
+#: ../gio/ginputstream.c:174 ../gio/ginputstream.c:366
+#: ../gio/ginputstream.c:604 ../gio/ginputstream.c:822
+#: ../gio/goutputstream.c:192 ../gio/goutputstream.c:721
#: ../gio/gpollableinputstream.c:207 ../gio/gpollableoutputstream.c:208
#, c-format
msgid "Too large count value passed to %s"
msgstr "傳給 %s 的計數值太大"
-#: ../gio/gbufferedinputstream.c:905 ../gio/gbufferedoutputstream.c:581
-#: ../gio/gdataoutputstream.c:568
+#: ../gio/gbufferedinputstream.c:896 ../gio/gbufferedoutputstream.c:577
+#: ../gio/gdataoutputstream.c:564
msgid "Seek not supported on base stream"
msgstr "不支援在基礎串流中搜尋"
-#: ../gio/gbufferedinputstream.c:951
+#: ../gio/gbufferedinputstream.c:942
msgid "Cannot truncate GBufferedInputStream"
msgstr "不能截短 GBufferedInputStream"
-#: ../gio/gbufferedinputstream.c:996 ../gio/ginputstream.c:1050
-#: ../gio/giostream.c:292 ../gio/goutputstream.c:1368
+#: ../gio/gbufferedinputstream.c:987 ../gio/ginputstream.c:1012
+#: ../gio/giostream.c:280 ../gio/goutputstream.c:1323
msgid "Stream is already closed"
msgstr "串流已經關閉"
-#: ../gio/gbufferedoutputstream.c:618 ../gio/gdataoutputstream.c:598
+#: ../gio/gbufferedoutputstream.c:614 ../gio/gdataoutputstream.c:594
msgid "Truncate not supported on base stream"
msgstr "在基礎串流中不支援截短(truncate)"
-#: ../gio/gcancellable.c:318 ../gio/gdbusconnection.c:1885
-#: ../gio/gdbusconnection.c:1977 ../gio/gdbusprivate.c:1414
-#: ../gio/glocalfile.c:2152 ../gio/gsimpleasyncresult.c:841
-#: ../gio/gsimpleasyncresult.c:867
+#: ../gio/gcancellable.c:314 ../gio/gdbusconnection.c:1897
+#: ../gio/gdbusconnection.c:1989 ../gio/gdbusprivate.c:1421
+#: ../gio/glocalfile.c:2177 ../gio/gsimpleasyncresult.c:843
+#: ../gio/gsimpleasyncresult.c:869
#, c-format
msgid "Operation was cancelled"
msgstr "操作已被取消"
msgid "Not enough space in destination"
msgstr "在目的端中沒有足夠的空間"
-#: ../gio/gcharsetconverter.c:344 ../gio/gdatainputstream.c:854
-#: ../gio/gdatainputstream.c:1294 ../glib/gconvert.c:768
-#: ../glib/gconvert.c:1160 ../glib/giochannel.c:1583 ../glib/giochannel.c:1625
-#: ../glib/giochannel.c:2468 ../glib/gutf8.c:841 ../glib/gutf8.c:1292
+#: ../gio/gcharsetconverter.c:344 ../gio/gdatainputstream.c:849
+#: ../gio/gdatainputstream.c:1259 ../glib/gconvert.c:467
+#: ../glib/gconvert.c:859 ../glib/giochannel.c:1586 ../glib/giochannel.c:1628
+#: ../glib/giochannel.c:2472 ../glib/gutf8.c:833 ../glib/gutf8.c:1284
msgid "Invalid byte sequence in conversion input"
msgstr "轉換輸入資料時遇到不正確的位元組組合"
-#: ../gio/gcharsetconverter.c:349 ../glib/gconvert.c:776
-#: ../glib/gconvert.c:1085 ../glib/giochannel.c:1590 ../glib/giochannel.c:2480
+#: ../gio/gcharsetconverter.c:349 ../glib/gconvert.c:475
+#: ../glib/gconvert.c:784 ../glib/giochannel.c:1593 ../glib/giochannel.c:2484
#, c-format
msgid "Error during conversion: %s"
msgstr "轉換時發生錯誤:%s"
-#: ../gio/gcharsetconverter.c:446 ../gio/gsocket.c:963
+#: ../gio/gcharsetconverter.c:446 ../gio/gsocket.c:990
msgid "Cancellable initialization not supported"
msgstr "不支援可取消的初始化"
-#: ../gio/gcharsetconverter.c:457 ../glib/gconvert.c:568
-#: ../glib/gconvert.c:646 ../glib/giochannel.c:1411
+#: ../gio/gcharsetconverter.c:457 ../glib/gconvert.c:347
+#: ../glib/giochannel.c:1414
#, c-format
msgid "Conversion from character set '%s' to '%s' is not supported"
msgstr "不支援將字符集‘%s’轉換成‘%s’"
-#: ../gio/gcharsetconverter.c:461 ../glib/gconvert.c:572
-#: ../glib/gconvert.c:650
+#: ../gio/gcharsetconverter.c:461 ../glib/gconvert.c:351
#, c-format
msgid "Could not open converter from '%s' to '%s'"
msgstr "無法將‘%s’轉換至‘%s’"
msgid "%s filetype"
msgstr "%s 檔案類型"
-#: ../gio/gcredentials.c:273 ../gio/gcredentials.c:495
+#: ../gio/gcredentials.c:264 ../gio/gcredentials.c:528
msgid "GCredentials is not implemented on this OS"
msgstr "GCredentials 沒有在這個 OS 上實作"
-#: ../gio/gcredentials.c:447
+#: ../gio/gcredentials.c:438
msgid "There is no GCredentials support for your platform"
msgstr "你的平臺沒有 GCredentials 支援"
-#: ../gio/gdatainputstream.c:311
+#: ../gio/gcredentials.c:480
+msgid "GCredentials does not contain a process ID on this OS"
+msgstr "GCredentials 沒有包含在這個 OS 上的程序 ID"
+
+#: ../gio/gdatainputstream.c:306
msgid "Unexpected early end-of-stream"
msgstr "未預期的串流過早結束"
-#: ../gio/gdbusaddress.c:149 ../gio/gdbusaddress.c:237
-#: ../gio/gdbusaddress.c:318
+#: ../gio/gdbusaddress.c:150 ../gio/gdbusaddress.c:238
+#: ../gio/gdbusaddress.c:319
#, c-format
-msgid "Unsupported key `%s' in address entry `%s'"
+msgid "Unsupported key '%s' in address entry '%s'"
msgstr "位址項目「%2$s」有不支援的設定鍵「%1$s」"
-#: ../gio/gdbusaddress.c:176
+#: ../gio/gdbusaddress.c:177
#, c-format
msgid ""
-"Address `%s' is invalid (need exactly one of path, tmpdir or abstract keys)"
+"Address '%s' is invalid (need exactly one of path, tmpdir or abstract keys)"
msgstr "位址「%s」是無效的(需要有明確的 path、tmpdir 或 abstract 設定鍵之一)"
-#: ../gio/gdbusaddress.c:189
+#: ../gio/gdbusaddress.c:190
#, c-format
-msgid "Meaningless key/value pair combination in address entry `%s'"
+msgid "Meaningless key/value pair combination in address entry '%s'"
msgstr "在位址項「%s」有無意義的設定鍵/數值組合配對"
-#: ../gio/gdbusaddress.c:252 ../gio/gdbusaddress.c:333
+#: ../gio/gdbusaddress.c:253 ../gio/gdbusaddress.c:334
#, c-format
-msgid "Error in address `%s' - the port attribute is malformed"
+msgid "Error in address '%s' - the port attribute is malformed"
msgstr "位址「%s」有錯誤 - port 屬性的格式不良"
-#: ../gio/gdbusaddress.c:263 ../gio/gdbusaddress.c:344
+#: ../gio/gdbusaddress.c:264 ../gio/gdbusaddress.c:345
#, c-format
-msgid "Error in address `%s' - the family attribute is malformed"
+msgid "Error in address '%s' - the family attribute is malformed"
msgstr "位址「%s」有錯誤 - family 屬性的格式不良"
-#: ../gio/gdbusaddress.c:453
+#: ../gio/gdbusaddress.c:454
#, c-format
-msgid "Address element `%s' does not contain a colon (:)"
+msgid "Address element '%s' does not contain a colon (:)"
msgstr "位址元素「%s」,並未包含分號 (:)"
-#: ../gio/gdbusaddress.c:474
+#: ../gio/gdbusaddress.c:475
#, c-format
msgid ""
-"Key/Value pair %d, `%s', in address element `%s' does not contain an equal "
+"Key/Value pair %d, '%s', in address element '%s' does not contain an equal "
"sign"
msgstr "設定鍵/數值配對 %d,「%s」,於位址元素「%s」,並未包含等於符號"
-#: ../gio/gdbusaddress.c:488
+#: ../gio/gdbusaddress.c:489
#, c-format
msgid ""
-"Error unescaping key or value in Key/Value pair %d, `%s', in address element "
-"`%s'"
+"Error unescaping key or value in Key/Value pair %d, '%s', in address element "
+"'%s'"
msgstr "在設定鍵/數值配對 %d,「%s」,位址元素「%s」中有錯誤的反轉義設定鍵"
-#: ../gio/gdbusaddress.c:566
+#: ../gio/gdbusaddress.c:567
#, c-format
msgid ""
-"Error in address `%s' - the unix transport requires exactly one of the keys "
-"`path' or `abstract' to be set"
+"Error in address '%s' - the unix transport requires exactly one of the keys "
+"'path' or 'abstract' to be set"
msgstr "位址「%s」有錯誤 - unix 傳輸需要明確的設定一個「path」或「abstract」設定鍵"
-#: ../gio/gdbusaddress.c:602
+#: ../gio/gdbusaddress.c:603
#, c-format
-msgid "Error in address `%s' - the host attribute is missing or malformed"
+msgid "Error in address '%s' - the host attribute is missing or malformed"
msgstr "位址「%s」有錯誤 - host 屬性遺失或格式不良"
-#: ../gio/gdbusaddress.c:616
+#: ../gio/gdbusaddress.c:617
#, c-format
-msgid "Error in address `%s' - the port attribute is missing or malformed"
+msgid "Error in address '%s' - the port attribute is missing or malformed"
msgstr "位址「%s」有錯誤 - port 屬性遺失或格式不良"
-#: ../gio/gdbusaddress.c:630
+#: ../gio/gdbusaddress.c:631
#, c-format
-msgid "Error in address `%s' - the noncefile attribute is missing or malformed"
+msgid "Error in address '%s' - the noncefile attribute is missing or malformed"
msgstr "位址「%s」有錯誤 - noncefile 屬性遺失或格式不良"
-#: ../gio/gdbusaddress.c:651
+#: ../gio/gdbusaddress.c:652
msgid "Error auto-launching: "
msgstr "自動執行失敗:"
-#: ../gio/gdbusaddress.c:659
+#: ../gio/gdbusaddress.c:660
#, c-format
-msgid "Unknown or unsupported transport `%s' for address `%s'"
+msgid "Unknown or unsupported transport '%s' for address '%s'"
msgstr "位址「%2$s」有不明或不支援的傳輸「%1$s」"
-#: ../gio/gdbusaddress.c:695
+#: ../gio/gdbusaddress.c:696
#, c-format
-msgid "Error opening nonce file `%s': %s"
+msgid "Error opening nonce file '%s': %s"
msgstr "開啟臨時檔案「%s」時發生錯誤:%s"
-#: ../gio/gdbusaddress.c:713
+#: ../gio/gdbusaddress.c:714
#, c-format
-msgid "Error reading from nonce file `%s': %s"
+msgid "Error reading from nonce file '%s': %s"
msgstr "讀取臨時檔案「%s」時發生錯誤:%s"
-#: ../gio/gdbusaddress.c:722
+#: ../gio/gdbusaddress.c:723
#, c-format
-msgid "Error reading from nonce file `%s', expected 16 bytes, got %d"
+msgid "Error reading from nonce file '%s', expected 16 bytes, got %d"
msgstr "讀取臨時檔案「%s」時發生錯誤,預期為 16 位元組,卻得到 %d"
-#: ../gio/gdbusaddress.c:740
+#: ../gio/gdbusaddress.c:741
#, c-format
-msgid "Error writing contents of nonce file `%s' to stream:"
+msgid "Error writing contents of nonce file '%s' to stream:"
msgstr "寫入臨時檔案「%s」的內容到串流時發生錯誤:"
-#: ../gio/gdbusaddress.c:959
+#: ../gio/gdbusaddress.c:960
msgid "The given address is empty"
msgstr "指定的位址是空白的"
-#: ../gio/gdbusaddress.c:1028
+#: ../gio/gdbusaddress.c:1030
+#, c-format
+msgid "Cannot spawn a message bus when setuid"
+msgstr "在 setuid 時不能產生訊息匯流排"
+
+#: ../gio/gdbusaddress.c:1037
msgid "Cannot spawn a message bus without a machine-id: "
msgstr "沒有 machine-id 不能產生訊息匯流排:"
-#: ../gio/gdbusaddress.c:1070
+#: ../gio/gdbusaddress.c:1079
#, c-format
-msgid "Error spawning command line `%s': "
+msgid "Error spawning command line '%s': "
msgstr "產生命令列「%s」時出現錯誤:"
-#: ../gio/gdbusaddress.c:1287
+#: ../gio/gdbusaddress.c:1296
#, c-format
msgid "(Type any character to close this window)\n"
msgstr "(輸入任何字符以關閉這個視窗)\n"
-#: ../gio/gdbusaddress.c:1412
+#: ../gio/gdbusaddress.c:1421
#, c-format
msgid "Session dbus not running, and autolaunch failed"
msgstr "作業階段 dbus 尚未執行,且自動執行失敗"
-#: ../gio/gdbusaddress.c:1433
+#: ../gio/gdbusaddress.c:1442
#, c-format
msgid "Cannot determine session bus address (not implemented for this OS)"
msgstr "不能判斷作業階段匯流排位址(沒有在這個 OS 實作)"
-#: ../gio/gdbusaddress.c:1532 ../gio/gdbusconnection.c:6755
+#: ../gio/gdbusaddress.c:1541 ../gio/gdbusconnection.c:6908
#, c-format
msgid ""
"Cannot determine bus address from DBUS_STARTER_BUS_TYPE environment variable "
-"- unknown value `%s'"
+"- unknown value '%s'"
msgstr "不能從 DBUS_STARTER_BUS_TYPE 環境變數判斷匯流排位址 - 不明的數值「%s」"
-#: ../gio/gdbusaddress.c:1541 ../gio/gdbusconnection.c:6764
+#: ../gio/gdbusaddress.c:1550 ../gio/gdbusconnection.c:6917
msgid ""
"Cannot determine bus address because the DBUS_STARTER_BUS_TYPE environment "
"variable is not set"
msgstr "不能判斷匯流排位址,因為尚未設定 DBUS_STARTER_BUS_TYPE 環境變數"
-#: ../gio/gdbusaddress.c:1551
+#: ../gio/gdbusaddress.c:1560
#, c-format
msgid "Unknown bus type %d"
msgstr "不明的匯流排類型 %d"
-#: ../gio/gdbusauth.c:298
+#: ../gio/gdbusauth.c:295
msgid "Unexpected lack of content trying to read a line"
msgstr "未預期的內容缺乏嘗試讀取行"
-#: ../gio/gdbusauth.c:342
+#: ../gio/gdbusauth.c:339
msgid "Unexpected lack of content trying to (safely) read a line"
msgstr "未預期的內容缺乏嘗試(安全的)讀取行"
-#: ../gio/gdbusauth.c:513
+#: ../gio/gdbusauth.c:510
#, c-format
msgid ""
"Exhausted all available authentication mechanisms (tried: %s) (available: %s)"
msgstr "竭盡所有可用的驗證機制 (已嘗試:%s) (可用:%s)"
-#: ../gio/gdbusauth.c:1174
+#: ../gio/gdbusauth.c:1172
msgid "Cancelled via GDBusAuthObserver::authorize-authenticated-peer"
msgstr "已透過 GDBusAuthObserver::authorize-authenticated-peer 取消"
-#: ../gio/gdbusauthmechanismsha1.c:266
+#: ../gio/gdbusauthmechanismsha1.c:262
#, c-format
-msgid "Error when getting information for directory `%s': %s"
+msgid "Error when getting information for directory '%s': %s"
msgstr "從目錄「%s」取得資訊時發生錯誤:%s"
-#: ../gio/gdbusauthmechanismsha1.c:278
+#: ../gio/gdbusauthmechanismsha1.c:274
#, c-format
msgid ""
-"Permissions on directory `%s' are malformed. Expected mode 0700, got 0%o"
+"Permissions on directory '%s' are malformed. Expected mode 0700, got 0%o"
msgstr "目錄「%s」的權限格式下良。預期的模式為 0700,卻得到 0%o"
-#: ../gio/gdbusauthmechanismsha1.c:299
+#: ../gio/gdbusauthmechanismsha1.c:295
#, c-format
-msgid "Error creating directory `%s': %s"
+msgid "Error creating directory '%s': %s"
msgstr "建立目錄「%s」時發生錯誤:%s"
-#: ../gio/gdbusauthmechanismsha1.c:382
+#: ../gio/gdbusauthmechanismsha1.c:378
#, c-format
-msgid "Error opening keyring `%s' for reading: "
+msgid "Error opening keyring '%s' for reading: "
msgstr "開啟密碼匙圈「%s」讀取時發生錯誤:"
-#: ../gio/gdbusauthmechanismsha1.c:406 ../gio/gdbusauthmechanismsha1.c:718
+#: ../gio/gdbusauthmechanismsha1.c:402 ../gio/gdbusauthmechanismsha1.c:715
#, c-format
-msgid "Line %d of the keyring at `%s' with content `%s' is malformed"
+msgid "Line %d of the keyring at '%s' with content '%s' is malformed"
msgstr "位於「%2$s」內容「%3$s」的密碼匙圈第 %1$d 列格式不良"
-#: ../gio/gdbusauthmechanismsha1.c:420 ../gio/gdbusauthmechanismsha1.c:732
+#: ../gio/gdbusauthmechanismsha1.c:416 ../gio/gdbusauthmechanismsha1.c:729
#, c-format
msgid ""
-"First token of line %d of the keyring at `%s' with content `%s' is malformed"
+"First token of line %d of the keyring at '%s' with content '%s' is malformed"
msgstr "位於「%2$s」內容「%3$s」的密碼匙圈第 %1$d 列第一記號格式不良"
-#: ../gio/gdbusauthmechanismsha1.c:435 ../gio/gdbusauthmechanismsha1.c:746
+#: ../gio/gdbusauthmechanismsha1.c:431 ../gio/gdbusauthmechanismsha1.c:743
#, c-format
msgid ""
-"Second token of line %d of the keyring at `%s' with content `%s' is malformed"
+"Second token of line %d of the keyring at '%s' with content '%s' is malformed"
msgstr "位於「%2$s」內容「%3$s」的密碼匙圈第 %1$d 列第二記號格式不良"
-#: ../gio/gdbusauthmechanismsha1.c:459
+#: ../gio/gdbusauthmechanismsha1.c:455
#, c-format
-msgid "Didn't find cookie with id %d in the keyring at `%s'"
+msgid "Didn't find cookie with id %d in the keyring at '%s'"
msgstr "在「%2$s」密碼匙圈找不到 id %1$d 的 cookie"
-#: ../gio/gdbusauthmechanismsha1.c:536
+#: ../gio/gdbusauthmechanismsha1.c:533
#, c-format
-msgid "Error deleting stale lock file `%s': %s"
+msgid "Error deleting stale lock file '%s': %s"
msgstr "刪除舊的鎖定檔案「%s」時發生錯誤:%s"
-#: ../gio/gdbusauthmechanismsha1.c:568
+#: ../gio/gdbusauthmechanismsha1.c:565
#, c-format
-msgid "Error creating lock file `%s': %s"
+msgid "Error creating lock file '%s': %s"
msgstr "建立鎖定檔案「%s」時發生錯誤:%s"
-#: ../gio/gdbusauthmechanismsha1.c:598
+#: ../gio/gdbusauthmechanismsha1.c:595
#, c-format
-msgid "Error closing (unlinked) lock file `%s': %s"
+msgid "Error closing (unlinked) lock file '%s': %s"
msgstr "關閉(取消連結)鎖定檔案時發生錯誤「%s」:%s"
-#: ../gio/gdbusauthmechanismsha1.c:608
+#: ../gio/gdbusauthmechanismsha1.c:605
#, c-format
-msgid "Error unlinking lock file `%s': %s"
+msgid "Error unlinking lock file '%s': %s"
msgstr "取消連結鎖定檔案時發生錯誤「%s」:%s"
-#: ../gio/gdbusauthmechanismsha1.c:685
+#: ../gio/gdbusauthmechanismsha1.c:682
#, c-format
-msgid "Error opening keyring `%s' for writing: "
+msgid "Error opening keyring '%s' for writing: "
msgstr "開啟密碼匙圈「%s」寫入時發生錯誤:"
-#: ../gio/gdbusauthmechanismsha1.c:882
+#: ../gio/gdbusauthmechanismsha1.c:879
#, c-format
-msgid "(Additionally, releasing the lock for `%s' also failed: %s) "
+msgid "(Additionally, releasing the lock for '%s' also failed: %s) "
msgstr "(另外,釋放「%s」的鎖定失敗:%s)"
-#: ../gio/gdbusconnection.c:597 ../gio/gdbusconnection.c:2440
+#: ../gio/gdbusconnection.c:609 ../gio/gdbusconnection.c:2452
msgid "The connection is closed"
msgstr "這個連線已關閉"
-#: ../gio/gdbusconnection.c:1930
+#: ../gio/gdbusconnection.c:1942
msgid "Timeout was reached"
msgstr "已達逾時時間"
-#: ../gio/gdbusconnection.c:2562
+#: ../gio/gdbusconnection.c:2574
msgid ""
"Unsupported flags encountered when constructing a client-side connection"
msgstr "當建立客戶端連線時遇到不支援的旗標"
-#: ../gio/gdbusconnection.c:4065 ../gio/gdbusconnection.c:4381
+#: ../gio/gdbusconnection.c:4146 ../gio/gdbusconnection.c:4489
#, c-format
msgid ""
-"No such interface `org.freedesktop.DBus.Properties' on object at path %s"
+"No such interface 'org.freedesktop.DBus.Properties' on object at path %s"
msgstr "在路徑 %s 的物件沒有「org.freedesktop.DBus.Properties」這個介面"
-#: ../gio/gdbusconnection.c:4136
+#: ../gio/gdbusconnection.c:4288
#, c-format
-msgid "Error setting property `%s': Expected type `%s' but got `%s'"
-msgstr "設定屬性「%s」錯誤:預期的類型為「%s」但得到「%s」"
-
-#: ../gio/gdbusconnection.c:4231
-#, c-format
-msgid "No such property `%s'"
+msgid "No such property '%s'"
msgstr "沒有這個屬性「%s」"
-#: ../gio/gdbusconnection.c:4243
+#: ../gio/gdbusconnection.c:4300
#, c-format
-msgid "Property `%s' is not readable"
+msgid "Property '%s' is not readable"
msgstr "屬性「%s」無法讀取"
-#: ../gio/gdbusconnection.c:4254
+#: ../gio/gdbusconnection.c:4311
#, c-format
-msgid "Property `%s' is not writable"
+msgid "Property '%s' is not writable"
msgstr "屬性「%s」無法寫入"
-#: ../gio/gdbusconnection.c:4324 ../gio/gdbusconnection.c:6198
+#: ../gio/gdbusconnection.c:4331
+#, c-format
+msgid "Error setting property '%s': Expected type '%s' but got '%s'"
+msgstr "設定屬性「%s」錯誤:預期的類型為「%s」但得到「%s」"
+
+#: ../gio/gdbusconnection.c:4432 ../gio/gdbusconnection.c:6351
#, c-format
-msgid "No such interface `%s'"
+msgid "No such interface '%s'"
msgstr "沒有這個介面「%s」"
-#: ../gio/gdbusconnection.c:4508
+#: ../gio/gdbusconnection.c:4639
msgid "No such interface"
msgstr "沒有這個介面"
-#: ../gio/gdbusconnection.c:4726 ../gio/gdbusconnection.c:6704
+#: ../gio/gdbusconnection.c:4857 ../gio/gdbusconnection.c:6857
#, c-format
-msgid "No such interface `%s' on object at path %s"
+msgid "No such interface '%s' on object at path %s"
msgstr "在路徑 %2$s 的物件沒有「%1$s」這個介面"
-#: ../gio/gdbusconnection.c:4781
+#: ../gio/gdbusconnection.c:4954
#, c-format
-msgid "No such method `%s'"
+msgid "No such method '%s'"
msgstr "沒有這個方法「%s」"
-#: ../gio/gdbusconnection.c:4812
+#: ../gio/gdbusconnection.c:4985
#, c-format
-msgid "Type of message, `%s', does not match expected type `%s'"
+msgid "Type of message, '%s', does not match expected type '%s'"
msgstr "訊息的類型,「%s」,不符合預期的類型「%s」"
-#: ../gio/gdbusconnection.c:5032
+#: ../gio/gdbusconnection.c:5183
#, c-format
msgid "An object is already exported for the interface %s at %s"
msgstr "有物件已為介面 %s 匯出於 %s"
-#: ../gio/gdbusconnection.c:5230
+#: ../gio/gdbusconnection.c:5381
#, c-format
-msgid "Method `%s' returned type `%s', but expected `%s'"
+msgid "Method '%s' returned type '%s', but expected '%s'"
msgstr "方法「%s」傳回類型「%s」,但預期為「%s」"
-#: ../gio/gdbusconnection.c:6309
+#: ../gio/gdbusconnection.c:6462
#, c-format
-msgid "Method `%s' on interface `%s' with signature `%s' does not exist"
+msgid "Method '%s' on interface '%s' with signature '%s' does not exist"
msgstr "介面「%2$s」簽署「%3$s」的方法「%1$s」不存在"
-#: ../gio/gdbusconnection.c:6428
+#: ../gio/gdbusconnection.c:6581
#, c-format
msgid "A subtree is already exported for %s"
msgstr "子樹狀目錄已為 %s 匯出"
-#: ../gio/gdbusmessage.c:859
+#: ../gio/gdbusmessage.c:1271
msgid "type is INVALID"
msgstr "類型為無效"
-#: ../gio/gdbusmessage.c:870
+#: ../gio/gdbusmessage.c:1282
msgid "METHOD_CALL message: PATH or MEMBER header field is missing"
msgstr "METHOD_CALL 訊息:缺少 PATH 或 MEMBER 標頭欄位"
-#: ../gio/gdbusmessage.c:881
+#: ../gio/gdbusmessage.c:1293
msgid "METHOD_RETURN message: REPLY_SERIAL header field is missing"
msgstr "METHOD_RETURN 訊息:缺少 REPLY_SERIAL 標頭欄位"
-#: ../gio/gdbusmessage.c:893
+#: ../gio/gdbusmessage.c:1305
msgid "ERROR message: REPLY_SERIAL or ERROR_NAME header field is missing"
msgstr "ERROR 訊息:缺少 REPLY_SERIAL 或 ERROR_NAME 標頭欄位"
-#: ../gio/gdbusmessage.c:906
+#: ../gio/gdbusmessage.c:1318
msgid "SIGNAL message: PATH, INTERFACE or MEMBER header field is missing"
msgstr "SIGNAL 訊息:缺少 PATH、INTERFACE 或 MEMBER 標頭欄位"
-#: ../gio/gdbusmessage.c:914
+#: ../gio/gdbusmessage.c:1326
msgid ""
"SIGNAL message: The PATH header field is using the reserved value /org/"
"freedesktop/DBus/Local"
msgstr "SIGNAL 訊息:PATH 標頭欄位使用了保留的數值 /org/freedesktop/DBus/Local"
-#: ../gio/gdbusmessage.c:922
+#: ../gio/gdbusmessage.c:1334
msgid ""
"SIGNAL message: The INTERFACE header field is using the reserved value org."
"freedesktop.DBus.Local"
msgstr "SIGNAL 訊息:INTERFACE 標頭欄位使用了保留的數值 org.freedesktop.DBus.Local"
-#: ../gio/gdbusmessage.c:998
+#: ../gio/gdbusmessage.c:1383
+#, c-format
+msgid "Wanted to read %lu byte but only got %lu"
+msgid_plural "Wanted to read %lu bytes but only got %lu"
+msgstr[0] "嘗試讀取 %lu 位元組卻只得到 %lu"
+
+#: ../gio/gdbusmessage.c:1398
#, c-format
-msgid "Wanted to read %lu byte but got EOF"
-msgid_plural "Wanted to read %lu bytes but got EOF"
-msgstr[0] "嘗試讀取 %lu 位元組卻得到 EOF"
+msgid "Expected NUL byte after the string '%s' but found byte %d"
+msgstr "預期在字串「%s」之後為 NUL 位元組,但是發現位元組 %d"
-#: ../gio/gdbusmessage.c:1025
+#: ../gio/gdbusmessage.c:1417
#, c-format
msgid ""
"Expected valid UTF-8 string but found invalid bytes at byte offset %d "
-"(length of string is %d). The valid UTF-8 string up until that point was `%s'"
+"(length of string is %d). The valid UTF-8 string up until that point was '%s'"
msgstr "預期為有效的 UTF-8 字串但是在位元組 %d 處發現無效的位元組(字串的長度為 %d)。到那一點之前的有效 UTF-8 字串為「%s」"
-#: ../gio/gdbusmessage.c:1038
-#, c-format
-msgid "Expected NUL byte after the string `%s' but found byte %d"
-msgstr "預期在字串「%s」之後為 NUL 位元組,但是發現位元組 %d"
-
-#: ../gio/gdbusmessage.c:1242
+#: ../gio/gdbusmessage.c:1619
#, c-format
-msgid "Parsed value `%s' is not a valid D-Bus object path"
+msgid "Parsed value '%s' is not a valid D-Bus object path"
msgstr "已解析數值「%s」不是有效的 D-Bus 物件路徑"
-#: ../gio/gdbusmessage.c:1268
+#: ../gio/gdbusmessage.c:1643
#, c-format
-msgid "Parsed value `%s' is not a valid D-Bus signature"
+msgid "Parsed value '%s' is not a valid D-Bus signature"
msgstr "已解析數值「%s」不是一個有效的 D-Bus 簽署"
-#: ../gio/gdbusmessage.c:1325
+#: ../gio/gdbusmessage.c:1698
#, c-format
msgid ""
"Encountered array of length %u byte. Maximum length is 2<<26 bytes (64 MiB)."
"Encountered array of length %u bytes. Maximum length is 2<<26 bytes (64 MiB)."
msgstr[0] "遇到長度為 %u 位元組的陣列。最大長度為 2<<26 位元組 (64 MiB)。"
-#: ../gio/gdbusmessage.c:1483
+#: ../gio/gdbusmessage.c:1851
#, c-format
-msgid "Parsed value `%s' for variant is not a valid D-Bus signature"
+msgid "Parsed value '%s' for variant is not a valid D-Bus signature"
msgstr "已分析數值「%s」不是有效的 D-Bus 簽署"
-#: ../gio/gdbusmessage.c:1510
+#: ../gio/gdbusmessage.c:1875
#, c-format
msgid ""
-"Error deserializing GVariant with type string `%s' from the D-Bus wire format"
+"Error deserializing GVariant with type string '%s' from the D-Bus wire format"
msgstr "從 D-Bus 線性格式以類型字串「%s」反序列化 GVariant 時發生錯誤"
-#: ../gio/gdbusmessage.c:1698
+#: ../gio/gdbusmessage.c:2062
#, c-format
msgid ""
"Invalid endianness value. Expected 0x6c ('l') or 0x42 ('B') but found value "
"0x%02x"
msgstr "無效的位元組順序數值。預期為 0x6c「I」或 0x42「B」卻得到數值 0x%02x"
-#: ../gio/gdbusmessage.c:1712
+#: ../gio/gdbusmessage.c:2075
#, c-format
msgid "Invalid major protocol version. Expected 1 but found %d"
msgstr "無效的主通訊協定版本。預期為 1 但找到 %d"
-#: ../gio/gdbusmessage.c:1769
+#: ../gio/gdbusmessage.c:2131
#, c-format
-msgid "Signature header with signature `%s' found but message body is empty"
+msgid "Signature header with signature '%s' found but message body is empty"
msgstr "發現簽署「%s」的簽署標頭但訊息主體是空的"
-#: ../gio/gdbusmessage.c:1783
+#: ../gio/gdbusmessage.c:2145
#, c-format
-msgid "Parsed value `%s' is not a valid D-Bus signature (for body)"
+msgid "Parsed value '%s' is not a valid D-Bus signature (for body)"
msgstr "已解析數值「%s」不是有效的 D-Bus 簽署 (於主體)"
-#: ../gio/gdbusmessage.c:1814
+#: ../gio/gdbusmessage.c:2175
#, c-format
msgid "No signature header in message but the message body is %u byte"
msgid_plural "No signature header in message but the message body is %u bytes"
msgstr[0] "在訊息中沒有簽署標頭但訊息主體有 %u 位元組"
-#: ../gio/gdbusmessage.c:1824
+#: ../gio/gdbusmessage.c:2185
msgid "Cannot deserialize message: "
msgstr "不能反序列化訊息:"
-#: ../gio/gdbusmessage.c:2156
+#: ../gio/gdbusmessage.c:2506
#, c-format
msgid ""
-"Error serializing GVariant with type string `%s' to the D-Bus wire format"
+"Error serializing GVariant with type string '%s' to the D-Bus wire format"
msgstr "從 D-Bus 線性格式以類型字串「%s」序列化 GVariant 時發生錯誤"
-#: ../gio/gdbusmessage.c:2297
+#: ../gio/gdbusmessage.c:2643
#, c-format
msgid ""
"Message has %d file descriptors but the header field indicates %d file "
"descriptors"
msgstr "訊息有 %d 檔案描述符但標頭欄位表示有 %d 檔案描述符"
-#: ../gio/gdbusmessage.c:2305
+#: ../gio/gdbusmessage.c:2651
msgid "Cannot serialize message: "
msgstr "不能序列化訊息:"
-#: ../gio/gdbusmessage.c:2349
+#: ../gio/gdbusmessage.c:2695
#, c-format
-msgid "Message body has signature `%s' but there is no signature header"
+msgid "Message body has signature '%s' but there is no signature header"
msgstr "訊息主體有簽署「%s」但是沒有簽署標頭"
-#: ../gio/gdbusmessage.c:2359
+#: ../gio/gdbusmessage.c:2705
#, c-format
msgid ""
-"Message body has type signature `%s' but signature in the header field is `"
-"%s'"
+"Message body has type signature '%s' but signature in the header field is "
+"'%s'"
msgstr "訊息主體有類型簽署「%s」但是標頭欄位中的簽署為「%s」"
-#: ../gio/gdbusmessage.c:2375
+#: ../gio/gdbusmessage.c:2721
#, c-format
-msgid "Message body is empty but signature in the header field is `(%s)'"
+msgid "Message body is empty but signature in the header field is '(%s)'"
msgstr "訊息主體是空的但是標頭欄位中的簽署為「%s」"
-#: ../gio/gdbusmessage.c:2932
+#: ../gio/gdbusmessage.c:3271
#, c-format
-msgid "Error return with body of type `%s'"
+msgid "Error return with body of type '%s'"
msgstr "傳回類型「%s」主體時發生錯誤"
-#: ../gio/gdbusmessage.c:2940
+#: ../gio/gdbusmessage.c:3279
msgid "Error return with empty body"
msgstr "傳回空白主體錯誤"
-#: ../gio/gdbusprivate.c:2062
+#: ../gio/gdbusprivate.c:2069
#, c-format
msgid "Unable to get Hardware profile: %s"
msgstr "無法取得硬件設定組合:%s"
-#: ../gio/gdbusprivate.c:2107
+#: ../gio/gdbusprivate.c:2114
msgid "Unable to load /var/lib/dbus/machine-id or /etc/machine-id: "
msgstr "無法載入 /var/lib/dbus/machine-id 或 /etc/machine-id:"
-#: ../gio/gdbusproxy.c:1640
+#: ../gio/gdbusproxy.c:1638
#, c-format
msgid "Error calling StartServiceByName for %s: "
msgstr "呼叫 %s StartServiceByName 時發生錯誤:"
-#: ../gio/gdbusproxy.c:1663
+#: ../gio/gdbusproxy.c:1661
#, c-format
msgid "Unexpected reply %d from StartServiceByName(\"%s\") method"
msgstr "來自 StartServiceByName(\"%2$s\") 方法的未預期回應 %1$d"
-#: ../gio/gdbusproxy.c:2763 ../gio/gdbusproxy.c:2900
+#: ../gio/gdbusproxy.c:2761 ../gio/gdbusproxy.c:2898
msgid ""
"Cannot invoke method; proxy is for a well-known name without an owner and "
"proxy was constructed with the G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START flag"
msgstr "不能呼叫方法;proxy 是沒有擁有者的知名名稱,而 proxy 是以 G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START 旗標建立的"
-#: ../gio/gdbusserver.c:708
+#: ../gio/gdbusserver.c:709
msgid "Abstract name space not supported"
msgstr "不支援抽象命名空間"
-#: ../gio/gdbusserver.c:795
+#: ../gio/gdbusserver.c:796
msgid "Cannot specify nonce file when creating a server"
msgstr "當建立伺服器時不能指定臨時檔案"
-#: ../gio/gdbusserver.c:873
+#: ../gio/gdbusserver.c:874
#, c-format
-msgid "Error writing nonce file at `%s': %s"
+msgid "Error writing nonce file at '%s': %s"
msgstr "在「%s」寫入臨時檔案時發生錯誤:%s"
-#: ../gio/gdbusserver.c:1041
+#: ../gio/gdbusserver.c:1043
#, c-format
-msgid "The string `%s' is not a valid D-Bus GUID"
+msgid "The string '%s' is not a valid D-Bus GUID"
msgstr "字串「%s」不是一個有效的 D-Bus GUID"
-#: ../gio/gdbusserver.c:1081
+#: ../gio/gdbusserver.c:1083
#, c-format
-msgid "Cannot listen on unsupported transport `%s'"
+msgid "Cannot listen on unsupported transport '%s'"
msgstr "不能聽取不支援的傳輸「%s」"
-#: ../gio/gdbus-tool.c:88
+#: ../gio/gdbus-tool.c:92
msgid "COMMAND"
msgstr "指令"
-#: ../gio/gdbus-tool.c:93
+#: ../gio/gdbus-tool.c:97
#, c-format
msgid ""
"Commands:\n"
"\n"
"使用「%s COMMAND --help」來取得每個指令的求助資訊。\n"
-#: ../gio/gdbus-tool.c:162 ../gio/gdbus-tool.c:218 ../gio/gdbus-tool.c:290
-#: ../gio/gdbus-tool.c:314 ../gio/gdbus-tool.c:691 ../gio/gdbus-tool.c:1010
-#: ../gio/gdbus-tool.c:1443
+#: ../gio/gdbus-tool.c:166 ../gio/gdbus-tool.c:222 ../gio/gdbus-tool.c:294
+#: ../gio/gdbus-tool.c:318 ../gio/gdbus-tool.c:701 ../gio/gdbus-tool.c:1022
+#: ../gio/gdbus-tool.c:1456
#, c-format
msgid "Error: %s\n"
msgstr "錯誤:%s\n"
-#: ../gio/gdbus-tool.c:173 ../gio/gdbus-tool.c:231 ../gio/gdbus-tool.c:1459
+#: ../gio/gdbus-tool.c:177 ../gio/gdbus-tool.c:235 ../gio/gdbus-tool.c:1472
#, c-format
msgid "Error parsing introspection XML: %s\n"
msgstr "解析檢討 XML 時出現錯誤:%s\n"
-#: ../gio/gdbus-tool.c:348
+#: ../gio/gdbus-tool.c:352
msgid "Connect to the system bus"
msgstr "連線到系統匯流排"
-#: ../gio/gdbus-tool.c:349
+#: ../gio/gdbus-tool.c:353
msgid "Connect to the session bus"
msgstr "連線到作業階段匯流排"
-#: ../gio/gdbus-tool.c:350
+#: ../gio/gdbus-tool.c:354
msgid "Connect to given D-Bus address"
msgstr "連線到指定的 D-Bus 位址"
-#: ../gio/gdbus-tool.c:360
+#: ../gio/gdbus-tool.c:364
msgid "Connection Endpoint Options:"
msgstr "連線端點選項:"
-#: ../gio/gdbus-tool.c:361
+#: ../gio/gdbus-tool.c:365
msgid "Options specifying the connection endpoint"
msgstr "指定連線端點的選項"
-#: ../gio/gdbus-tool.c:383
+#: ../gio/gdbus-tool.c:387
#, c-format
msgid "No connection endpoint specified"
msgstr "沒有指定連線端點"
-#: ../gio/gdbus-tool.c:393
+#: ../gio/gdbus-tool.c:397
#, c-format
msgid "Multiple connection endpoints specified"
msgstr "指定了多重連線端點"
-#: ../gio/gdbus-tool.c:463
+#: ../gio/gdbus-tool.c:467
#, c-format
msgid ""
-"Warning: According to introspection data, interface `%s' does not exist\n"
+"Warning: According to introspection data, interface '%s' does not exist\n"
msgstr "警告:根據檢討資料,介面「%s」不存在\n"
-#: ../gio/gdbus-tool.c:472
+#: ../gio/gdbus-tool.c:476
#, c-format
msgid ""
-"Warning: According to introspection data, method `%s' does not exist on "
-"interface `%s'\n"
+"Warning: According to introspection data, method '%s' does not exist on "
+"interface '%s'\n"
msgstr "警告:根據檢討資料,介面「%2$s」的方法「%1$s」不存在\n"
-#: ../gio/gdbus-tool.c:534
+#: ../gio/gdbus-tool.c:538
msgid "Optional destination for signal (unique name)"
msgstr "信號的選擇性目的端 (獨特名稱)"
-#: ../gio/gdbus-tool.c:535
+#: ../gio/gdbus-tool.c:539
msgid "Object path to emit signal on"
msgstr "要發出信號的物件路徑"
-#: ../gio/gdbus-tool.c:536
+#: ../gio/gdbus-tool.c:540
msgid "Signal and interface name"
msgstr "信號和介面名稱"
-#: ../gio/gdbus-tool.c:568
+#: ../gio/gdbus-tool.c:572
msgid "Emit a signal."
msgstr "發出信號。"
-#: ../gio/gdbus-tool.c:602 ../gio/gdbus-tool.c:822 ../gio/gdbus-tool.c:1549
-#: ../gio/gdbus-tool.c:1781
+#: ../gio/gdbus-tool.c:606 ../gio/gdbus-tool.c:832 ../gio/gdbus-tool.c:1562
+#: ../gio/gdbus-tool.c:1794
#, c-format
msgid "Error connecting: %s\n"
msgstr "連線錯誤:%s\n"
-#: ../gio/gdbus-tool.c:614
+#: ../gio/gdbus-tool.c:618
#, c-format
msgid "Error: object path not specified.\n"
msgstr "錯誤:沒有指定物件路徑。\n"
-#: ../gio/gdbus-tool.c:619 ../gio/gdbus-tool.c:883 ../gio/gdbus-tool.c:1607
-#: ../gio/gdbus-tool.c:1840
+#: ../gio/gdbus-tool.c:623 ../gio/gdbus-tool.c:893 ../gio/gdbus-tool.c:1620
+#: ../gio/gdbus-tool.c:1853
#, c-format
msgid "Error: %s is not a valid object path\n"
msgstr "錯誤:%s 不是有效的物件路徑\n"
-#: ../gio/gdbus-tool.c:625
+#: ../gio/gdbus-tool.c:629
#, c-format
msgid "Error: signal not specified.\n"
msgstr "錯誤:尚未指定信號。\n"
-#: ../gio/gdbus-tool.c:634
+#: ../gio/gdbus-tool.c:636
+#, c-format
+msgid "Error: signal must be the fully-qualified name.\n"
+msgstr "錯誤:信號必須為完全合規定的名稱。\n"
+
+#: ../gio/gdbus-tool.c:644
#, c-format
msgid "Error: %s is not a valid interface name\n"
msgstr "錯誤:%s 不是有效的介面名稱\n"
-#: ../gio/gdbus-tool.c:640
+#: ../gio/gdbus-tool.c:650
#, c-format
msgid "Error: %s is not a valid member name\n"
msgstr "錯誤:%s 不是有效的成員名稱\n"
-#: ../gio/gdbus-tool.c:646
+#: ../gio/gdbus-tool.c:656
#, c-format
msgid "Error: %s is not a valid unique bus name.\n"
msgstr "錯誤:%s 不是有效的獨特匯流排名稱。\n"
-#: ../gio/gdbus-tool.c:669 ../gio/gdbus-tool.c:982
+#: ../gio/gdbus-tool.c:679 ../gio/gdbus-tool.c:992
#, c-format
msgid "Error parsing parameter %d: %s\n"
msgstr "解析參數 %d 時發生錯誤:%s\n"
-#: ../gio/gdbus-tool.c:698
+#: ../gio/gdbus-tool.c:708
#, c-format
msgid "Error flushing connection: %s\n"
msgstr "清除連線時發生錯誤:%s\n"
-#: ../gio/gdbus-tool.c:725
+#: ../gio/gdbus-tool.c:735
msgid "Destination name to invoke method on"
msgstr "要呼叫方法的目的端名稱"
-#: ../gio/gdbus-tool.c:726
+#: ../gio/gdbus-tool.c:736
msgid "Object path to invoke method on"
msgstr "要呼叫方法的物件路徑"
-#: ../gio/gdbus-tool.c:727
+#: ../gio/gdbus-tool.c:737
msgid "Method and interface name"
msgstr "方法和介面名稱"
-#: ../gio/gdbus-tool.c:728
+#: ../gio/gdbus-tool.c:738
msgid "Timeout in seconds"
msgstr "逾時時間(秒)"
-#: ../gio/gdbus-tool.c:767
+#: ../gio/gdbus-tool.c:777
msgid "Invoke a method on a remote object."
msgstr "呼叫遠端物件的方法。"
-#: ../gio/gdbus-tool.c:842 ../gio/gdbus-tool.c:1568 ../gio/gdbus-tool.c:1800
+#: ../gio/gdbus-tool.c:852 ../gio/gdbus-tool.c:1581 ../gio/gdbus-tool.c:1813
#, c-format
msgid "Error: Destination is not specified\n"
msgstr "錯誤:尚未指定目的端\n"
-#: ../gio/gdbus-tool.c:863 ../gio/gdbus-tool.c:1587
+#: ../gio/gdbus-tool.c:873 ../gio/gdbus-tool.c:1600
#, c-format
msgid "Error: Object path is not specified\n"
msgstr "錯誤:沒有指定物件路徑\n"
-#: ../gio/gdbus-tool.c:898
+#: ../gio/gdbus-tool.c:908
#, c-format
msgid "Error: Method name is not specified\n"
msgstr "錯誤:沒有指定方法名稱\n"
-#: ../gio/gdbus-tool.c:909
+#: ../gio/gdbus-tool.c:919
#, c-format
-msgid "Error: Method name `%s' is invalid\n"
+msgid "Error: Method name '%s' is invalid\n"
msgstr "錯誤:方法名稱「%s」是無效的\n"
-#: ../gio/gdbus-tool.c:974
+#: ../gio/gdbus-tool.c:984
#, c-format
-msgid "Error parsing parameter %d of type `%s': %s\n"
+msgid "Error parsing parameter %d of type '%s': %s\n"
msgstr "解析類型「%2$s」的參數 %1$d 時發生錯誤:%3$s\n"
-#: ../gio/gdbus-tool.c:1406
+#: ../gio/gdbus-tool.c:1419
msgid "Destination name to introspect"
msgstr "要檢討的目的端名稱"
-#: ../gio/gdbus-tool.c:1407
+#: ../gio/gdbus-tool.c:1420
msgid "Object path to introspect"
msgstr "要檢討的物件路徑"
-#: ../gio/gdbus-tool.c:1408
+#: ../gio/gdbus-tool.c:1421
msgid "Print XML"
msgstr "顯示 XML"
-#: ../gio/gdbus-tool.c:1409
+#: ../gio/gdbus-tool.c:1422
msgid "Introspect children"
msgstr "Introspect 子項目"
-#: ../gio/gdbus-tool.c:1410
+#: ../gio/gdbus-tool.c:1423
msgid "Only print properties"
msgstr "只有列印屬性"
-#: ../gio/gdbus-tool.c:1501
+#: ../gio/gdbus-tool.c:1514
msgid "Introspect a remote object."
msgstr "檢討遠端物件。"
-#: ../gio/gdbus-tool.c:1699
+#: ../gio/gdbus-tool.c:1712
msgid "Destination name to monitor"
msgstr "要監控的目的端名稱"
-#: ../gio/gdbus-tool.c:1700
+#: ../gio/gdbus-tool.c:1713
msgid "Object path to monitor"
msgstr "要監控的物件路徑"
-#: ../gio/gdbus-tool.c:1733
+#: ../gio/gdbus-tool.c:1746
msgid "Monitor a remote object."
msgstr "監控遠端物件。"
-#: ../gio/gdesktopappinfo.c:580 ../gio/gwin32appinfo.c:221
+#: ../gio/gdesktopappinfo.c:660 ../gio/gdesktopappinfo.c:3793
+#: ../gio/gwin32appinfo.c:221
msgid "Unnamed"
msgstr "未命名的"
-#: ../gio/gdesktopappinfo.c:993
+#: ../gio/gdesktopappinfo.c:1074
msgid "Desktop file didn't specify Exec field"
msgstr "桌面(Desktop)檔案未指定 Exec 欄位"
-#: ../gio/gdesktopappinfo.c:1281
+#: ../gio/gdesktopappinfo.c:1359
msgid "Unable to find terminal required for application"
msgstr "無法找到應用程式要求的終端機"
-#: ../gio/gdesktopappinfo.c:1569
+#: ../gio/gdesktopappinfo.c:1772
#, c-format
msgid "Can't create user application configuration folder %s: %s"
msgstr "不能建立使用者應用程式組態資料夾 %s:%s"
-#: ../gio/gdesktopappinfo.c:1573
+#: ../gio/gdesktopappinfo.c:1776
#, c-format
msgid "Can't create user MIME configuration folder %s: %s"
msgstr "不能建立使用者 MIME 組態資料夾 %s:%s"
-#: ../gio/gdesktopappinfo.c:1813 ../gio/gdesktopappinfo.c:1837
+#: ../gio/gdesktopappinfo.c:2016 ../gio/gdesktopappinfo.c:2040
msgid "Application information lacks an identifier"
msgstr "應用程式資訊缺少識別碼"
-#: ../gio/gdesktopappinfo.c:2069
+#: ../gio/gdesktopappinfo.c:2272
#, c-format
msgid "Can't create user desktop file %s"
msgstr "不能建立使用者桌面檔案 %s"
-#: ../gio/gdesktopappinfo.c:2191
+#: ../gio/gdesktopappinfo.c:2396
#, c-format
msgid "Custom definition for %s"
msgstr "自選 %s 的定義"
-#: ../gio/gdrive.c:363
+#: ../gio/gdrive.c:394
msgid "drive doesn't implement eject"
msgstr "裝置無法實作退出功能(eject)"
#. Translators: This is an error
#. * message for drive objects that
#. * don't implement any of eject or eject_with_operation.
-#: ../gio/gdrive.c:440
+#: ../gio/gdrive.c:472
msgid "drive doesn't implement eject or eject_with_operation"
msgstr "裝置無法實作退出功能(eject) 或 eject_with_operation"
-#: ../gio/gdrive.c:513
+#: ../gio/gdrive.c:548
msgid "drive doesn't implement polling for media"
msgstr "裝置無法實作媒體的輪詢"
-#: ../gio/gdrive.c:716
+#: ../gio/gdrive.c:753
msgid "drive doesn't implement start"
msgstr "裝置無法實作啟動功能(start)"
-#: ../gio/gdrive.c:815
+#: ../gio/gdrive.c:855
msgid "drive doesn't implement stop"
msgstr "裝置無法實作停止功能(stop)"
-#: ../gio/gdummytlsbackend.c:172 ../gio/gdummytlsbackend.c:292
-#: ../gio/gdummytlsbackend.c:382
+#: ../gio/gdummytlsbackend.c:168 ../gio/gdummytlsbackend.c:288
+#: ../gio/gdummytlsbackend.c:378
msgid "TLS support is not available"
msgstr "TLS 支援無法使用"
msgid "Malformed number of tokens (%d) in GEmblem encoding"
msgstr "GEmblem 編碼中記號 (%d) 的數量格式不正確"
-#: ../gio/gemblemedicon.c:367
+#: ../gio/gemblemedicon.c:364
#, c-format
msgid "Can't handle version %d of GEmblemedIcon encoding"
msgstr "不能處理版本為 %d 的 GEmblemedIcon 編碼"
-#: ../gio/gemblemedicon.c:377
+#: ../gio/gemblemedicon.c:374
#, c-format
msgid "Malformed number of tokens (%d) in GEmblemedIcon encoding"
msgstr "GEmblemedIcon 編碼中記號 (%d) 的數量格式不正確"
-#: ../gio/gemblemedicon.c:400
+#: ../gio/gemblemedicon.c:397
msgid "Expected a GEmblem for GEmblemedIcon"
msgstr "預期為 GEmblemedIcon 的 GEmblem"
-#: ../gio/gfile.c:884 ../gio/gfile.c:1111 ../gio/gfile.c:1242
-#: ../gio/gfile.c:1471 ../gio/gfile.c:1525 ../gio/gfile.c:1582
-#: ../gio/gfile.c:1665 ../gio/gfile.c:1720 ../gio/gfile.c:1780
-#: ../gio/gfile.c:1834 ../gio/gfile.c:3273 ../gio/gfile.c:3327
-#: ../gio/gfile.c:3470 ../gio/gfile.c:3511 ../gio/gfile.c:3901
-#: ../gio/gfile.c:4303 ../gio/gfile.c:4385 ../gio/gfile.c:4470
-#: ../gio/gfile.c:4564 ../gio/gfile.c:4647 ../gio/gfile.c:4737
-#: ../gio/gfile.c:5067 ../gio/gfile.c:5391 ../gio/gfile.c:5459
-#: ../gio/gfile.c:7083 ../gio/gfile.c:7169 ../gio/gfile.c:7251
+#: ../gio/gfile.c:938 ../gio/gfile.c:1177 ../gio/gfile.c:1316
+#: ../gio/gfile.c:1556 ../gio/gfile.c:1611 ../gio/gfile.c:1669
+#: ../gio/gfile.c:1753 ../gio/gfile.c:1810 ../gio/gfile.c:1874
+#: ../gio/gfile.c:1929 ../gio/gfile.c:3559 ../gio/gfile.c:3614
+#: ../gio/gfile.c:3822 ../gio/gfile.c:3864 ../gio/gfile.c:4330
+#: ../gio/gfile.c:4742 ../gio/gfile.c:4827 ../gio/gfile.c:4917
+#: ../gio/gfile.c:5014 ../gio/gfile.c:5101 ../gio/gfile.c:5202
+#: ../gio/gfile.c:7381 ../gio/gfile.c:7471 ../gio/gfile.c:7555
#: ../gio/win32/gwinhttpfile.c:439
msgid "Operation not supported"
msgstr "不支援的操作"
-#. Translators: This is an error message when trying to find the
-#. * enclosing (user visible) mount of a file, but none exists.
+#. Translators: This is an error message when
+#. * trying to find the enclosing (user visible)
+#. * mount of a file, but none exists.
+#.
#. Translators: This is an error message when trying to
#. * find the enclosing (user visible) mount of a file, but
#. * none exists.
#. Translators: This is an error message when trying to find
#. * the enclosing (user visible) mount of a file, but none
#. * exists.
-#: ../gio/gfile.c:1359 ../gio/glocalfile.c:1089 ../gio/glocalfile.c:1100
-#: ../gio/glocalfile.c:1113
+#: ../gio/gfile.c:1440 ../gio/glocalfile.c:1101 ../gio/glocalfile.c:1112
+#: ../gio/glocalfile.c:1125
msgid "Containing mount does not exist"
msgstr "包含了不存在的掛載點"
-#: ../gio/gfile.c:2380 ../gio/glocalfile.c:2308
+#: ../gio/gfile.c:2495 ../gio/glocalfile.c:2333
msgid "Can't copy over directory"
msgstr "不能複製整個目錄"
-#: ../gio/gfile.c:2441
+#: ../gio/gfile.c:2555
msgid "Can't copy directory over directory"
msgstr "不能將目錄複製到目錄上"
-#: ../gio/gfile.c:2449 ../gio/glocalfile.c:2317
+#: ../gio/gfile.c:2563 ../gio/glocalfile.c:2342
msgid "Target file exists"
msgstr "目標檔案已存在"
-#: ../gio/gfile.c:2467
+#: ../gio/gfile.c:2582
msgid "Can't recursively copy directory"
msgstr "不能遞廻複製目錄"
-#: ../gio/gfile.c:2727
+#: ../gio/gfile.c:2864
msgid "Splice not supported"
msgstr "不支援拼接"
-#: ../gio/gfile.c:2731
+#: ../gio/gfile.c:2868
#, c-format
msgid "Error splicing file: %s"
msgstr "拼接檔案時發生錯誤:%s"
-#: ../gio/gfile.c:2878
+#: ../gio/gfile.c:2999
+msgid "Copy (reflink/clone) between mounts is not supported"
+msgstr "不支援在掛載點之間複製 (參照連結/重製)"
+
+#: ../gio/gfile.c:3003
+msgid "Copy (reflink/clone) is not supported or invalid"
+msgstr "複製 (參照連結/重製) 不支援或無效"
+
+#: ../gio/gfile.c:3008
+msgid "Copy (reflink/clone) is not supported or didn't work"
+msgstr "複製 (參照連結/重製) 不支援或無法運作"
+
+#: ../gio/gfile.c:3071
msgid "Can't copy special file"
msgstr "不能複製特殊的檔案"
-#: ../gio/gfile.c:3460
+#: ../gio/gfile.c:3812
msgid "Invalid symlink value given"
msgstr "提供了無效的符號連結值"
-#: ../gio/gfile.c:3618
+#: ../gio/gfile.c:3974
msgid "Trash not supported"
msgstr "不支援回收筒"
-#: ../gio/gfile.c:3667
+#: ../gio/gfile.c:4087
#, c-format
msgid "File names cannot contain '%c'"
msgstr "檔案名稱不能包含「%c」"
-#: ../gio/gfile.c:6146 ../gio/gvolume.c:332
+#: ../gio/gfile.c:6504 ../gio/gvolume.c:365
msgid "volume doesn't implement mount"
msgstr "儲存區尚未實作掛載功能"
-#: ../gio/gfile.c:6253
+#: ../gio/gfile.c:6613
msgid "No application is registered as handling this file"
msgstr "沒有應用程式註冊為用以處理這個檔案"
-#: ../gio/gfileenumerator.c:205
+#: ../gio/gfileenumerator.c:213
msgid "Enumerator is closed"
msgstr "檔案列舉器(enumerator)已關閉"
-#: ../gio/gfileenumerator.c:212 ../gio/gfileenumerator.c:271
-#: ../gio/gfileenumerator.c:371 ../gio/gfileenumerator.c:476
+#: ../gio/gfileenumerator.c:220 ../gio/gfileenumerator.c:279
+#: ../gio/gfileenumerator.c:379 ../gio/gfileenumerator.c:479
msgid "File enumerator has outstanding operation"
msgstr "檔案列舉器(enumerator)有異常操作"
-#: ../gio/gfileenumerator.c:361 ../gio/gfileenumerator.c:466
+#: ../gio/gfileenumerator.c:370 ../gio/gfileenumerator.c:470
msgid "File enumerator is already closed"
msgstr "檔案列舉器(enumerator)已經關閉"
msgid "Malformed input data for GFileIcon"
msgstr "給 GFileIcon 的輸入資料格式不良"
-#: ../gio/gfileinputstream.c:154 ../gio/gfileinputstream.c:415
-#: ../gio/gfileiostream.c:170 ../gio/gfileoutputstream.c:169
-#: ../gio/gfileoutputstream.c:518
+#: ../gio/gfileinputstream.c:151 ../gio/gfileinputstream.c:397
+#: ../gio/gfileiostream.c:169 ../gio/gfileoutputstream.c:166
+#: ../gio/gfileoutputstream.c:500
msgid "Stream doesn't support query_info"
msgstr "串流不支援 query_info"
-#: ../gio/gfileinputstream.c:330 ../gio/gfileiostream.c:382
-#: ../gio/gfileoutputstream.c:376
+#: ../gio/gfileinputstream.c:328 ../gio/gfileiostream.c:382
+#: ../gio/gfileoutputstream.c:374
msgid "Seek not supported on stream"
msgstr "不支援在串流中搜尋"
-#: ../gio/gfileinputstream.c:374
+#: ../gio/gfileinputstream.c:372
msgid "Truncate not allowed on input stream"
msgstr "在輸入串流中不允許截短(truncate)"
-#: ../gio/gfileiostream.c:458 ../gio/gfileoutputstream.c:452
+#: ../gio/gfileiostream.c:458 ../gio/gfileoutputstream.c:450
msgid "Truncate not supported on stream"
msgstr "在串流中不支援截短(truncate)"
-#: ../gio/gicon.c:284
+#: ../gio/gicon.c:297
#, c-format
msgid "Wrong number of tokens (%d)"
msgstr "記號數量 (%d) 錯誤"
-#: ../gio/gicon.c:304
+#: ../gio/gicon.c:317
#, c-format
msgid "No type for class name %s"
msgstr "類別名稱 %s 沒有類型"
-#: ../gio/gicon.c:314
+#: ../gio/gicon.c:327
#, c-format
msgid "Type %s does not implement the GIcon interface"
msgstr "類型 %s 沒有實作 GIcon 介面"
-#: ../gio/gicon.c:325
+#: ../gio/gicon.c:338
#, c-format
msgid "Type %s is not classed"
msgstr "類型 %s 尚未歸類"
-#: ../gio/gicon.c:339
+#: ../gio/gicon.c:352
#, c-format
msgid "Malformed version number: %s"
msgstr "格式不良的版本號碼:%s"
-#: ../gio/gicon.c:353
+#: ../gio/gicon.c:366
#, c-format
msgid "Type %s does not implement from_tokens() on the GIcon interface"
msgstr "類型 %s 沒有實作 GIcon 介面的 from_tokens()"
-#: ../gio/gicon.c:428
+#: ../gio/gicon.c:468
msgid "Can't handle the supplied version of the icon encoding"
msgstr "不能處理提供的圖示編碼版本"
-#: ../gio/ginetaddressmask.c:184
+#: ../gio/ginetaddressmask.c:183
msgid "No address specified"
msgstr "尚未指定位址"
-#: ../gio/ginetaddressmask.c:192
+#: ../gio/ginetaddressmask.c:191
#, c-format
msgid "Length %u is too long for address"
msgstr "長度 %u 對位址來說太長了"
-#: ../gio/ginetaddressmask.c:225
+#: ../gio/ginetaddressmask.c:224
msgid "Address has bits set beyond prefix length"
msgstr "位址在 prefix length 後有位元設定"
-#: ../gio/ginetaddressmask.c:304
+#: ../gio/ginetaddressmask.c:301
#, c-format
msgid "Could not parse '%s' as IP address mask"
msgstr "無法解析「%s」做為 IP 位址遮罩"
-#: ../gio/ginetsocketaddress.c:206 ../gio/ginetsocketaddress.c:223
-#: ../gio/gunixsocketaddress.c:221
+#: ../gio/ginetsocketaddress.c:197 ../gio/ginetsocketaddress.c:214
+#: ../gio/gunixsocketaddress.c:211
msgid "Not enough space for socket address"
msgstr "socket 位址沒有足夠的空間"
-#: ../gio/ginetsocketaddress.c:238
+#: ../gio/ginetsocketaddress.c:229
msgid "Unsupported socket address"
msgstr "不支援的 socket 位址"
-#: ../gio/ginputstream.c:194
+#: ../gio/ginputstream.c:183
msgid "Input stream doesn't implement read"
msgstr "輸入串流尚未實作讀取"
#. Translators: This is an error you get if there is
#. * already an operation running against this stream when
#. * you try to start one
-#: ../gio/ginputstream.c:1060 ../gio/giostream.c:302
-#: ../gio/goutputstream.c:1378
+#: ../gio/ginputstream.c:1022 ../gio/giostream.c:290
+#: ../gio/goutputstream.c:1333
msgid "Stream has outstanding operation"
msgstr "串流有異常操作"
-#: ../gio/glib-compile-resources.c:141 ../gio/glib-compile-schemas.c:1455
+#: ../gio/glib-compile-resources.c:145 ../gio/glib-compile-schemas.c:1459
#, c-format
msgid "Element <%s> not allowed inside <%s>"
msgstr "元素 <%s> 不可出現在 <%s> 內"
-#: ../gio/glib-compile-resources.c:145
+#: ../gio/glib-compile-resources.c:149
#, c-format
msgid "Element <%s> not allowed at toplevel"
msgstr "元素 <%s> 不允許在頂端層級"
-#: ../gio/glib-compile-resources.c:235
+#: ../gio/glib-compile-resources.c:239
#, c-format
msgid "File %s appears multiple times in the resource"
msgstr "檔案 %s 似乎在這個資源出出現多次"
-#: ../gio/glib-compile-resources.c:248
+#: ../gio/glib-compile-resources.c:252
#, c-format
msgid "Failed to locate '%s' in any source directory"
msgstr "無法在任何來源目錄中定位「%s」"
-#: ../gio/glib-compile-resources.c:259
+#: ../gio/glib-compile-resources.c:263
#, c-format
msgid "Failed to locate '%s' in current directory"
msgstr "無法在目前的目錄中定位「%s」"
-#: ../gio/glib-compile-resources.c:288
+#: ../gio/glib-compile-resources.c:291
#, c-format
msgid "Unknown processing option \"%s\""
msgstr "不明的置處理選項「%s」"
-#: ../gio/glib-compile-resources.c:306 ../gio/glib-compile-resources.c:365
+#: ../gio/glib-compile-resources.c:310 ../gio/glib-compile-resources.c:370
#, c-format
msgid "Failed to create temp file: %s"
msgstr "無法建立暫存檔案:%s"
-#: ../gio/glib-compile-resources.c:336
+#: ../gio/glib-compile-resources.c:340
#, c-format
msgid ""
"Error processing input file with xmllint:\n"
"以 xmllint 處理輸入檔案時發生錯誤:\n"
"%s"
-#: ../gio/glib-compile-resources.c:391
+#: ../gio/glib-compile-resources.c:396
#, c-format
msgid ""
"Error processing input file with to-pixdata:\n"
"以 to-pixdata 處理輸入檔案時發生錯誤:\n"
"%s"
-#: ../gio/glib-compile-resources.c:404
+#: ../gio/glib-compile-resources.c:410
#, c-format
msgid "Error reading file %s: %s"
msgstr "讀取檔案 %s 時發生錯誤:%s"
-#: ../gio/glib-compile-resources.c:424
+#: ../gio/glib-compile-resources.c:430
#, c-format
msgid "Error compressing file %s"
msgstr "壓縮檔案 %s 時發生錯誤"
-#: ../gio/glib-compile-resources.c:488 ../gio/glib-compile-schemas.c:1567
+#: ../gio/glib-compile-resources.c:494 ../gio/glib-compile-schemas.c:1571
#, c-format
msgid "text may not appear inside <%s>"
msgstr "在 <%s> 內不能出現文字"
-#: ../gio/glib-compile-resources.c:611
+#: ../gio/glib-compile-resources.c:619
msgid "name of the output file"
msgstr "輸出檔案的名稱"
-#: ../gio/glib-compile-resources.c:611 ../gio/glib-compile-resources.c:644
-#: ../gio/gresource-tool.c:477 ../gio/gresource-tool.c:543
+#: ../gio/glib-compile-resources.c:619 ../gio/glib-compile-resources.c:650
+#: ../gio/gresource-tool.c:482 ../gio/gresource-tool.c:548
msgid "FILE"
msgstr "FILE"
-#: ../gio/glib-compile-resources.c:612
+#: ../gio/glib-compile-resources.c:620
msgid ""
"The directories where files are to be read from (default to current "
"directory)"
msgstr "用來讀取檔案的目錄 (預設為目前的目錄)"
-#: ../gio/glib-compile-resources.c:612 ../gio/glib-compile-schemas.c:1995
-#: ../gio/glib-compile-schemas.c:2025
+#: ../gio/glib-compile-resources.c:620 ../gio/glib-compile-schemas.c:1999
+#: ../gio/glib-compile-schemas.c:2028
msgid "DIRECTORY"
msgstr "目錄"
-#: ../gio/glib-compile-resources.c:613
+#: ../gio/glib-compile-resources.c:621
msgid ""
"Generate output in the format selected for by the target filename extension"
msgstr "以目標檔案名稱的延伸檔名來選擇要產生輸出的格式"
-#: ../gio/glib-compile-resources.c:614
+#: ../gio/glib-compile-resources.c:622
msgid "Generate source header"
msgstr "產生來源標頭"
-#: ../gio/glib-compile-resources.c:615
+#: ../gio/glib-compile-resources.c:623
msgid "Generate sourcecode used to link in the resource file into your code"
msgstr "產生原始碼用來連結資源檔到你的程式碼中"
-#: ../gio/glib-compile-resources.c:616
+#: ../gio/glib-compile-resources.c:624
msgid "Generate dependency list"
msgstr "產生相根據性清單"
-#: ../gio/glib-compile-resources.c:617
+#: ../gio/glib-compile-resources.c:625
msgid "Don't automatically create and register resource"
msgstr "不要自動建立與註冊資源"
-#: ../gio/glib-compile-resources.c:618
+#: ../gio/glib-compile-resources.c:626
+msgid "Don't export functions; declare them G_GNUC_INTERNAL"
+msgstr "不用匯出函數;宣告他們為 G_GNUC_INTERNAL"
+
+#: ../gio/glib-compile-resources.c:627
msgid "C identifier name used for the generated source code"
msgstr "用於產生原始碼的 C 識別碼名稱"
-#: ../gio/glib-compile-resources.c:647
+#: ../gio/glib-compile-resources.c:653
msgid ""
"Compile a resource specification into a resource file.\n"
"Resource specification files have the extension .gresource.xml,\n"
"資源規格檔案的延伸檔名必須為 .gresource.xml,\n"
"而資源檔案的延伸檔名叫做 .gresource。"
-#: ../gio/glib-compile-resources.c:663
+#: ../gio/glib-compile-resources.c:669
#, c-format
msgid "You should give exactly one file name\n"
msgstr "你應該明確指定一個檔案名稱\n"
-#: ../gio/glib-compile-schemas.c:774
+#: ../gio/glib-compile-schemas.c:778
msgid "empty names are not permitted"
msgstr "不允許空名名稱"
-#: ../gio/glib-compile-schemas.c:784
+#: ../gio/glib-compile-schemas.c:788
#, c-format
msgid "invalid name '%s': names must begin with a lowercase letter"
msgstr "無效的名稱「%s」:名稱必須以小寫字母開頭"
-#: ../gio/glib-compile-schemas.c:796
+#: ../gio/glib-compile-schemas.c:800
#, c-format
msgid ""
"invalid name '%s': invalid character '%c'; only lowercase letters, numbers "
"and hyphen ('-') are permitted."
msgstr "無效的名稱「%s」:無效的字符「%c」;只允許小寫字母、數字和破折號 ('-')。"
-#: ../gio/glib-compile-schemas.c:805
+#: ../gio/glib-compile-schemas.c:809
#, c-format
msgid "invalid name '%s': two successive hyphens ('--') are not permitted."
msgstr "無效的名稱「%s」:不允許兩個破折號 ('--')。"
-#: ../gio/glib-compile-schemas.c:814
+#: ../gio/glib-compile-schemas.c:818
#, c-format
msgid "invalid name '%s': the last character may not be a hyphen ('-')."
msgstr "無效的名稱「%s」:最後一個字符不能是破折號 ('-')。"
-#: ../gio/glib-compile-schemas.c:822
+#: ../gio/glib-compile-schemas.c:826
#, c-format
msgid "invalid name '%s': maximum length is 1024"
msgstr "無效的名稱「%s」:最大長度為 1024"
-#: ../gio/glib-compile-schemas.c:891
+#: ../gio/glib-compile-schemas.c:895
#, c-format
msgid "<child name='%s'> already specified"
msgstr "<child name='%s'> 已經指定了"
-#: ../gio/glib-compile-schemas.c:917
+#: ../gio/glib-compile-schemas.c:921
msgid "cannot add keys to a 'list-of' schema"
msgstr "不能將設定鍵加入 'list-of' schema"
-#: ../gio/glib-compile-schemas.c:928
+#: ../gio/glib-compile-schemas.c:932
#, c-format
msgid "<key name='%s'> already specified"
msgstr "<key name='%s'> 已經指定了"
-#: ../gio/glib-compile-schemas.c:946
+#: ../gio/glib-compile-schemas.c:950
#, c-format
msgid ""
"<key name='%s'> shadows <key name='%s'> in <schema id='%s'>; use <override> "
"to modify value"
msgstr "<key name='%s'> 遮蔽 <key name='%s'> 於 <schema id='%s'>;使用 <override> 來修改數值"
-#: ../gio/glib-compile-schemas.c:957
+#: ../gio/glib-compile-schemas.c:961
#, c-format
msgid ""
"exactly one of 'type', 'enum' or 'flags' must be specified as an attribute "
"to <key>"
msgstr "必須明確指定「type」、「enum」或「flags」之一做為 <key> 的屬性"
-#: ../gio/glib-compile-schemas.c:976
+#: ../gio/glib-compile-schemas.c:980
#, c-format
msgid "<%s id='%s'> not (yet) defined."
msgstr "<%s id='%s'> 尚未定義。"
-#: ../gio/glib-compile-schemas.c:991
+#: ../gio/glib-compile-schemas.c:995
#, c-format
msgid "invalid GVariant type string '%s'"
msgstr "無效的 GVariant 類型字串「%s」"
-#: ../gio/glib-compile-schemas.c:1021
+#: ../gio/glib-compile-schemas.c:1025
msgid "<override> given but schema isn't extending anything"
msgstr "指定了 <override> 但 schema 並未延伸任何東西"
-#: ../gio/glib-compile-schemas.c:1034
+#: ../gio/glib-compile-schemas.c:1038
#, c-format
msgid "no <key name='%s'> to override"
msgstr "沒有 <key name='%s'> 要覆蓋"
-#: ../gio/glib-compile-schemas.c:1042
+#: ../gio/glib-compile-schemas.c:1046
#, c-format
msgid "<override name='%s'> already specified"
msgstr "<override name='%s'> 已經指定了"
-#: ../gio/glib-compile-schemas.c:1113
+#: ../gio/glib-compile-schemas.c:1117
#, c-format
msgid "<schema id='%s'> already specified"
msgstr "<schema id='%s'> 已經指定了"
-#: ../gio/glib-compile-schemas.c:1125
+#: ../gio/glib-compile-schemas.c:1129
#, c-format
-msgid "<schema id='%s'> extends not-yet-existing schema '%s'"
-msgstr "<schema id='%s'> 延伸了尚不存在的 schema '%s'"
+msgid "<schema id='%s'> extends not yet existing schema '%s'"
+msgstr "<schema id='%s'> 延伸了尚不存在的 schema「%s」"
-#: ../gio/glib-compile-schemas.c:1141
+#: ../gio/glib-compile-schemas.c:1145
#, c-format
-msgid "<schema id='%s'> is list of not-yet-existing schema '%s'"
-msgstr "<schema id='%s'> 是尚不存在的 schema '%s' 的清單"
+msgid "<schema id='%s'> is list of not yet existing schema '%s'"
+msgstr "<schema id='%s'> 是尚不存在的 schema「%s」的清單"
-#: ../gio/glib-compile-schemas.c:1149
+#: ../gio/glib-compile-schemas.c:1153
#, c-format
msgid "Can not be a list of a schema with a path"
msgstr "不能成為有路徑 schema 的清單"
-#: ../gio/glib-compile-schemas.c:1159
+#: ../gio/glib-compile-schemas.c:1163
#, c-format
msgid "Can not extend a schema with a path"
msgstr "不能延伸有路徑的 schema"
-#: ../gio/glib-compile-schemas.c:1169
+#: ../gio/glib-compile-schemas.c:1173
#, c-format
msgid ""
"<schema id='%s'> is a list, extending <schema id='%s'> which is not a list"
msgstr "<schema id='%s'> 是清單,卻延伸了不是清單的 <schema id='%s'>"
-#: ../gio/glib-compile-schemas.c:1179
+#: ../gio/glib-compile-schemas.c:1183
#, c-format
msgid ""
"<schema id='%s' list-of='%s'> extends <schema id='%s' list-of='%s'> but '%s' "
"does not extend '%s'"
msgstr "<schema id='%s' list-of='%s'> 延伸了 <schema id='%s' list-of='%s'> 但是 '%s' 並未延伸 '%s'"
-#: ../gio/glib-compile-schemas.c:1196
+#: ../gio/glib-compile-schemas.c:1200
#, c-format
msgid "a path, if given, must begin and end with a slash"
msgstr "如果指定了路徑,開頭與結尾都要加上斜線"
-#: ../gio/glib-compile-schemas.c:1203
+#: ../gio/glib-compile-schemas.c:1207
#, c-format
msgid "the path of a list must end with ':/'"
msgstr "清單的路徑不能以‘:/’為結尾"
-#: ../gio/glib-compile-schemas.c:1235
+#: ../gio/glib-compile-schemas.c:1239
#, c-format
msgid "<%s id='%s'> already specified"
msgstr "<%s id='%s'> 已經指定了"
-#: ../gio/glib-compile-schemas.c:1459
+#: ../gio/glib-compile-schemas.c:1463
#, c-format
msgid "Element <%s> not allowed at the top level"
msgstr "元素 <%s> 不允許在頂端層級"
#. Translators: Do not translate "--strict".
-#: ../gio/glib-compile-schemas.c:1753 ../gio/glib-compile-schemas.c:1824
-#: ../gio/glib-compile-schemas.c:1900
+#: ../gio/glib-compile-schemas.c:1757 ../gio/glib-compile-schemas.c:1828
+#: ../gio/glib-compile-schemas.c:1904
#, c-format
msgid "--strict was specified; exiting.\n"
msgstr "並且指定了 --strict;正在結束。\n"
-#: ../gio/glib-compile-schemas.c:1761
+#: ../gio/glib-compile-schemas.c:1765
#, c-format
msgid "This entire file has been ignored.\n"
msgstr "這整個檔案都被忽略了。\n"
-#: ../gio/glib-compile-schemas.c:1820
+#: ../gio/glib-compile-schemas.c:1824
#, c-format
msgid "Ignoring this file.\n"
msgstr "忽略這個檔案。\n"
-#: ../gio/glib-compile-schemas.c:1860
+#: ../gio/glib-compile-schemas.c:1864
#, c-format
-msgid "No such key `%s' in schema `%s' as specified in override file `%s'"
+msgid "No such key '%s' in schema '%s' as specified in override file '%s'"
msgstr "在覆蓋檔案「%3$s」的 schema「%2$s」中沒有指定這個設定鍵「%1$s」"
-#: ../gio/glib-compile-schemas.c:1866 ../gio/glib-compile-schemas.c:1924
-#: ../gio/glib-compile-schemas.c:1952
+#: ../gio/glib-compile-schemas.c:1870 ../gio/glib-compile-schemas.c:1928
+#: ../gio/glib-compile-schemas.c:1956
#, c-format
msgid "; ignoring override for this key.\n"
msgstr ";忽略這個設定鍵的覆蓋。\n"
-#: ../gio/glib-compile-schemas.c:1870 ../gio/glib-compile-schemas.c:1928
-#: ../gio/glib-compile-schemas.c:1956
+#: ../gio/glib-compile-schemas.c:1874 ../gio/glib-compile-schemas.c:1932
+#: ../gio/glib-compile-schemas.c:1960
#, c-format
msgid " and --strict was specified; exiting.\n"
msgstr "並且指定了 --strict;正在結束。\n"
-#: ../gio/glib-compile-schemas.c:1886
+#: ../gio/glib-compile-schemas.c:1890
#, c-format
msgid ""
-"error parsing key `%s' in schema `%s' as specified in override file `%s': "
-"%s. "
-msgstr "在覆蓋檔案「%3$s」中指定的 schema「%2$s」解析設定鍵「%1$s」時發生錯誤:%4$s。"
+"error parsing key '%s' in schema '%s' as specified in override file '%s': %s."
+msgstr "在覆蓋檔案「%3$s」指定的 schema「%2$s」分析設定鍵「%1$s」時發生錯誤:%4$s。"
-#: ../gio/glib-compile-schemas.c:1896
+#: ../gio/glib-compile-schemas.c:1900
#, c-format
msgid "Ignoring override for this key.\n"
msgstr "忽略這個設定鍵的覆蓋。\n"
-#: ../gio/glib-compile-schemas.c:1914
+#: ../gio/glib-compile-schemas.c:1918
#, c-format
msgid ""
-"override for key `%s' in schema `%s' in override file `%s' is outside the "
+"override for key '%s' in schema '%s' in override file '%s' is outside the "
"range given in the schema"
msgstr "在覆蓋檔案「%3$s」中覆蓋 schema「%2$s」的設定鍵「%1$s」超出了 schema 指定的範圍"
-#: ../gio/glib-compile-schemas.c:1942
+#: ../gio/glib-compile-schemas.c:1946
#, c-format
msgid ""
-"override for key `%s' in schema `%s' in override file `%s' is not in the "
+"override for key '%s' in schema '%s' in override file '%s' is not in the "
"list of valid choices"
msgstr "在覆蓋檔案「%3$s」中覆蓋 schema「%2$s」的設定鍵「%1$s」不在有效的選擇清單中"
-#: ../gio/glib-compile-schemas.c:1995
+#: ../gio/glib-compile-schemas.c:1999
msgid "where to store the gschemas.compiled file"
msgstr "要將 gschemas.compiled 檔案儲存到哪裏"
-#: ../gio/glib-compile-schemas.c:1996
+#: ../gio/glib-compile-schemas.c:2000
msgid "Abort on any errors in schemas"
msgstr "在 schema 中有任何錯誤即中止"
-#: ../gio/glib-compile-schemas.c:1997
+#: ../gio/glib-compile-schemas.c:2001
msgid "Do not write the gschema.compiled file"
msgstr "不要寫入 gschemas.compiled 檔案"
-#: ../gio/glib-compile-schemas.c:1998
+#: ../gio/glib-compile-schemas.c:2002
msgid "Do not enforce key name restrictions"
msgstr "不要強制設定鍵名稱限制"
-#: ../gio/glib-compile-schemas.c:2028
+#: ../gio/glib-compile-schemas.c:2031
msgid ""
"Compile all GSettings schema files into a schema cache.\n"
"Schema files are required to have the extension .gschema.xml,\n"
"Schema 檔案的延伸檔名必須為 .gschema.xml,\n"
"而快取檔案叫做 gschemas.compiled。"
-#: ../gio/glib-compile-schemas.c:2044
+#: ../gio/glib-compile-schemas.c:2047
#, c-format
msgid "You should give exactly one directory name\n"
msgstr "你應該明確指定一個目錄名稱\n"
-#: ../gio/glib-compile-schemas.c:2083
+#: ../gio/glib-compile-schemas.c:2086
#, c-format
msgid "No schema files found: "
msgstr "找不到 schema 檔案:"
-#: ../gio/glib-compile-schemas.c:2086
+#: ../gio/glib-compile-schemas.c:2089
#, c-format
msgid "doing nothing.\n"
msgstr "不做任何事。\n"
-#: ../gio/glib-compile-schemas.c:2089
+#: ../gio/glib-compile-schemas.c:2092
#, c-format
msgid "removed existing output file.\n"
msgstr "移除現有的輸出檔案。\n"
-#: ../gio/glocaldirectorymonitor.c:287
+#: ../gio/glocaldirectorymonitor.c:252
msgid "Unable to find default local directory monitor type"
msgstr "無法找到預設的本地端目錄監視器類型"
-#: ../gio/glocalfile.c:590 ../gio/win32/gwinhttpfile.c:422
+#: ../gio/glocalfile.c:602 ../gio/win32/gwinhttpfile.c:422
#, c-format
msgid "Invalid filename %s"
msgstr "無效的檔案名稱 %s"
-#: ../gio/glocalfile.c:967
+#: ../gio/glocalfile.c:979
#, c-format
msgid "Error getting filesystem info: %s"
msgstr "取得檔案系統資訊時發生錯誤:%s"
-#: ../gio/glocalfile.c:1135
+#: ../gio/glocalfile.c:1147
msgid "Can't rename root directory"
msgstr "不能重新命名根目錄"
-#: ../gio/glocalfile.c:1155 ../gio/glocalfile.c:1181
+#: ../gio/glocalfile.c:1167 ../gio/glocalfile.c:1193
#, c-format
msgid "Error renaming file: %s"
msgstr "重新命名檔案時發生錯誤:%s"
-#: ../gio/glocalfile.c:1164
+#: ../gio/glocalfile.c:1176
msgid "Can't rename file, filename already exists"
msgstr "不能重新命名檔案,該檔案名稱已存在"
-#: ../gio/glocalfile.c:1177 ../gio/glocalfile.c:2181 ../gio/glocalfile.c:2210
-#: ../gio/glocalfile.c:2370 ../gio/glocalfileoutputstream.c:581
-#: ../gio/glocalfileoutputstream.c:634 ../gio/glocalfileoutputstream.c:679
-#: ../gio/glocalfileoutputstream.c:1167
+#: ../gio/glocalfile.c:1189 ../gio/glocalfile.c:2206 ../gio/glocalfile.c:2235
+#: ../gio/glocalfile.c:2395 ../gio/glocalfileoutputstream.c:553
msgid "Invalid filename"
msgstr "無效的檔案名稱"
-#: ../gio/glocalfile.c:1344 ../gio/glocalfile.c:1368
+#: ../gio/glocalfile.c:1356 ../gio/glocalfile.c:1380
msgid "Can't open directory"
msgstr "不能開啟目錄"
-#: ../gio/glocalfile.c:1352
+#: ../gio/glocalfile.c:1364
#, c-format
msgid "Error opening file: %s"
msgstr "開啓檔案時發生錯誤:%s"
-#: ../gio/glocalfile.c:1493
+#: ../gio/glocalfile.c:1505
#, c-format
msgid "Error removing file: %s"
msgstr "移除檔案時發生錯誤:%s"
-#: ../gio/glocalfile.c:1860
+#: ../gio/glocalfile.c:1885
#, c-format
msgid "Error trashing file: %s"
msgstr "移動檔案至回收筒時發生錯誤:%s"
-#: ../gio/glocalfile.c:1883
+#: ../gio/glocalfile.c:1908
#, c-format
msgid "Unable to create trash dir %s: %s"
msgstr "無法建立回收筒目錄 %s:%s"
-#: ../gio/glocalfile.c:1904
+#: ../gio/glocalfile.c:1929
msgid "Unable to find toplevel directory for trash"
msgstr "無法找到回收筒的頂端層級目錄"
-#: ../gio/glocalfile.c:1983 ../gio/glocalfile.c:2003
+#: ../gio/glocalfile.c:2008 ../gio/glocalfile.c:2028
msgid "Unable to find or create trash directory"
msgstr "無法找到或建立回收筒目錄"
-#: ../gio/glocalfile.c:2037
+#: ../gio/glocalfile.c:2062
#, c-format
msgid "Unable to create trashing info file: %s"
msgstr "無法建立回收筒資訊檔案:%s"
-#: ../gio/glocalfile.c:2066 ../gio/glocalfile.c:2071 ../gio/glocalfile.c:2151
-#: ../gio/glocalfile.c:2158
+#: ../gio/glocalfile.c:2091 ../gio/glocalfile.c:2096 ../gio/glocalfile.c:2176
+#: ../gio/glocalfile.c:2183
#, c-format
msgid "Unable to trash file: %s"
msgstr "無法將檔案移至回收筒:%s"
-#: ../gio/glocalfile.c:2159 ../glib/gregex.c:280
+#: ../gio/glocalfile.c:2184 ../glib/gregex.c:280
msgid "internal error"
msgstr "內部的錯誤"
-#: ../gio/glocalfile.c:2185
+#: ../gio/glocalfile.c:2210
#, c-format
msgid "Error creating directory: %s"
msgstr "建立目錄發生錯誤:%s"
-#: ../gio/glocalfile.c:2214
+#: ../gio/glocalfile.c:2239
#, c-format
msgid "Filesystem does not support symbolic links"
msgstr "檔案系統不支援符號連結"
-#: ../gio/glocalfile.c:2218
+#: ../gio/glocalfile.c:2243
#, c-format
msgid "Error making symbolic link: %s"
msgstr "建立符號連結時發生錯誤:%s"
-#: ../gio/glocalfile.c:2280 ../gio/glocalfile.c:2374
+#: ../gio/glocalfile.c:2305 ../gio/glocalfile.c:2399
#, c-format
msgid "Error moving file: %s"
msgstr "移動檔案時發生錯誤:%s"
-#: ../gio/glocalfile.c:2303
+#: ../gio/glocalfile.c:2328
msgid "Can't move directory over directory"
msgstr "不能將目錄移動至目錄上"
-#: ../gio/glocalfile.c:2330 ../gio/glocalfileoutputstream.c:965
-#: ../gio/glocalfileoutputstream.c:979 ../gio/glocalfileoutputstream.c:994
-#: ../gio/glocalfileoutputstream.c:1010 ../gio/glocalfileoutputstream.c:1024
+#: ../gio/glocalfile.c:2355 ../gio/glocalfileoutputstream.c:929
+#: ../gio/glocalfileoutputstream.c:943 ../gio/glocalfileoutputstream.c:958
+#: ../gio/glocalfileoutputstream.c:974 ../gio/glocalfileoutputstream.c:988
msgid "Backup file creation failed"
msgstr "建立備份檔案失敗"
-#: ../gio/glocalfile.c:2349
+#: ../gio/glocalfile.c:2374
#, c-format
msgid "Error removing target file: %s"
msgstr "移除目標檔案時發生錯誤:%s"
-#: ../gio/glocalfile.c:2363
+#: ../gio/glocalfile.c:2388
msgid "Move between mounts not supported"
msgstr "不支援在掛載點之間移動"
-#: ../gio/glocalfileinfo.c:718
+#: ../gio/glocalfileinfo.c:722
msgid "Attribute value must be non-NULL"
msgstr "屬性數值必須為非-NULL"
-#: ../gio/glocalfileinfo.c:725
+#: ../gio/glocalfileinfo.c:729
msgid "Invalid attribute type (string expected)"
msgstr "無效的屬性類型(應為字串值)"
-#: ../gio/glocalfileinfo.c:732
+#: ../gio/glocalfileinfo.c:736
msgid "Invalid extended attribute name"
msgstr "無效的延伸屬性名稱"
-#: ../gio/glocalfileinfo.c:772
+#: ../gio/glocalfileinfo.c:776
#, c-format
msgid "Error setting extended attribute '%s': %s"
msgstr "設定延伸屬性「%s」時發生錯誤:%s"
-#: ../gio/glocalfileinfo.c:1425
+#: ../gio/glocalfileinfo.c:1544
msgid " (invalid encoding)"
msgstr "(無效的編碼)"
-#: ../gio/glocalfileinfo.c:1526 ../gio/glocalfileoutputstream.c:843
+#: ../gio/glocalfileinfo.c:1736 ../gio/glocalfileoutputstream.c:807
#, c-format
msgid "Error when getting information for file '%s': %s"
msgstr "取得檔案「%s」資訊時發生錯誤:%s"
-#: ../gio/glocalfileinfo.c:1778
+#: ../gio/glocalfileinfo.c:1982
#, c-format
msgid "Error when getting information for file descriptor: %s"
msgstr "取得檔案描述狀態資訊時發生錯誤:%s"
-#: ../gio/glocalfileinfo.c:1823
+#: ../gio/glocalfileinfo.c:2027
msgid "Invalid attribute type (uint32 expected)"
msgstr "無效的屬性類型(應為 uint32 值)"
-#: ../gio/glocalfileinfo.c:1841
+#: ../gio/glocalfileinfo.c:2045
msgid "Invalid attribute type (uint64 expected)"
msgstr "無效的屬性類型(應為 uint64 值)"
-#: ../gio/glocalfileinfo.c:1860 ../gio/glocalfileinfo.c:1879
+#: ../gio/glocalfileinfo.c:2064 ../gio/glocalfileinfo.c:2083
msgid "Invalid attribute type (byte string expected)"
msgstr "無效的屬性類型(應為 byte string 值)"
-#: ../gio/glocalfileinfo.c:1914
+#: ../gio/glocalfileinfo.c:2118
msgid "Cannot set permissions on symlinks"
msgstr "不能設定符號連結的權限"
-#: ../gio/glocalfileinfo.c:1930
+#: ../gio/glocalfileinfo.c:2134
#, c-format
msgid "Error setting permissions: %s"
msgstr "設定權限時發生錯誤:%s"
-#: ../gio/glocalfileinfo.c:1981
+#: ../gio/glocalfileinfo.c:2185
#, c-format
msgid "Error setting owner: %s"
msgstr "設定擁有者時發生錯誤:%s"
-#: ../gio/glocalfileinfo.c:2004
+#: ../gio/glocalfileinfo.c:2208
msgid "symlink must be non-NULL"
msgstr "符號連結必須為非-NULL"
-#: ../gio/glocalfileinfo.c:2014 ../gio/glocalfileinfo.c:2033
-#: ../gio/glocalfileinfo.c:2044
+#: ../gio/glocalfileinfo.c:2218 ../gio/glocalfileinfo.c:2237
+#: ../gio/glocalfileinfo.c:2248
#, c-format
msgid "Error setting symlink: %s"
msgstr "設定符號連結時發生錯誤:%s"
-#: ../gio/glocalfileinfo.c:2023
+#: ../gio/glocalfileinfo.c:2227
msgid "Error setting symlink: file is not a symlink"
msgstr "設定符號連結時發生錯誤:檔案不是符號連結"
-#: ../gio/glocalfileinfo.c:2149
+#: ../gio/glocalfileinfo.c:2353
#, c-format
msgid "Error setting modification or access time: %s"
msgstr "設定修改或存取時刻時發生錯誤:%s"
-#: ../gio/glocalfileinfo.c:2172
+#: ../gio/glocalfileinfo.c:2376
msgid "SELinux context must be non-NULL"
msgstr "SELinux 關聯必須為非-NULL"
-#: ../gio/glocalfileinfo.c:2187
+#: ../gio/glocalfileinfo.c:2391
#, c-format
msgid "Error setting SELinux context: %s"
msgstr "設定 SELinux 關聯時發生錯誤:%s"
-#: ../gio/glocalfileinfo.c:2194
+#: ../gio/glocalfileinfo.c:2398
msgid "SELinux is not enabled on this system"
msgstr "SELinux 在這個系統上並未啟用"
-#: ../gio/glocalfileinfo.c:2286
+#: ../gio/glocalfileinfo.c:2490
#, c-format
msgid "Setting attribute %s not supported"
msgstr "不支援設定屬性 %s"
-#: ../gio/glocalfileinputstream.c:185 ../gio/glocalfileoutputstream.c:732
+#: ../gio/glocalfileinputstream.c:172 ../gio/glocalfileoutputstream.c:698
#, c-format
msgid "Error reading from file: %s"
msgstr "從檔案讀取時發生錯誤:%s"
-#: ../gio/glocalfileinputstream.c:216 ../gio/glocalfileinputstream.c:228
-#: ../gio/glocalfileinputstream.c:340 ../gio/glocalfileoutputstream.c:470
-#: ../gio/glocalfileoutputstream.c:1042
+#: ../gio/glocalfileinputstream.c:203 ../gio/glocalfileinputstream.c:215
+#: ../gio/glocalfileinputstream.c:322 ../gio/glocalfileoutputstream.c:460
+#: ../gio/glocalfileoutputstream.c:1006
#, c-format
msgid "Error seeking in file: %s"
msgstr "在檔案中搜尋時發生錯誤:%s"
-#: ../gio/glocalfileinputstream.c:261 ../gio/glocalfileoutputstream.c:256
-#: ../gio/glocalfileoutputstream.c:351
+#: ../gio/glocalfileinputstream.c:244 ../gio/glocalfileoutputstream.c:250
+#: ../gio/glocalfileoutputstream.c:344
#, c-format
msgid "Error closing file: %s"
msgstr "關閉檔案時發生錯誤:%s"
-#: ../gio/glocalfilemonitor.c:212
+#: ../gio/glocalfilemonitor.c:176
msgid "Unable to find default local file monitor type"
msgstr "無法找到預設的本地端檔案監視器類型"
-#: ../gio/glocalfileoutputstream.c:202 ../gio/glocalfileoutputstream.c:235
-#: ../gio/glocalfileoutputstream.c:753
+#: ../gio/glocalfileoutputstream.c:198 ../gio/glocalfileoutputstream.c:230
+#: ../gio/glocalfileoutputstream.c:719
#, c-format
msgid "Error writing to file: %s"
msgstr "寫入至檔案時發生錯誤:%s"
-#: ../gio/glocalfileoutputstream.c:283
+#: ../gio/glocalfileoutputstream.c:277
#, c-format
msgid "Error removing old backup link: %s"
msgstr "移除舊備份連結時發生錯誤:%s"
-#: ../gio/glocalfileoutputstream.c:297 ../gio/glocalfileoutputstream.c:310
+#: ../gio/glocalfileoutputstream.c:291 ../gio/glocalfileoutputstream.c:304
#, c-format
msgid "Error creating backup copy: %s"
msgstr "建立備份複本時發生錯誤:%s"
-#: ../gio/glocalfileoutputstream.c:328
+#: ../gio/glocalfileoutputstream.c:322
#, c-format
msgid "Error renaming temporary file: %s"
msgstr "重新命名暫存檔案時發生錯誤:%s"
-#: ../gio/glocalfileoutputstream.c:516 ../gio/glocalfileoutputstream.c:1093
+#: ../gio/glocalfileoutputstream.c:506 ../gio/glocalfileoutputstream.c:1057
#, c-format
msgid "Error truncating file: %s"
msgstr "截短檔案時發生錯誤:%s"
-#: ../gio/glocalfileoutputstream.c:587 ../gio/glocalfileoutputstream.c:640
-#: ../gio/glocalfileoutputstream.c:685 ../gio/glocalfileoutputstream.c:825
-#: ../gio/glocalfileoutputstream.c:1074 ../gio/glocalfileoutputstream.c:1173
+#: ../gio/glocalfileoutputstream.c:559 ../gio/glocalfileoutputstream.c:789
+#: ../gio/glocalfileoutputstream.c:1038
#, c-format
msgid "Error opening file '%s': %s"
msgstr "開啟檔案「%s」時發生錯誤:%s"
-#: ../gio/glocalfileoutputstream.c:856
+#: ../gio/glocalfileoutputstream.c:820
msgid "Target file is a directory"
msgstr "目標檔案是一個目錄"
-#: ../gio/glocalfileoutputstream.c:861
+#: ../gio/glocalfileoutputstream.c:825
msgid "Target file is not a regular file"
msgstr "目標檔案不是正規的檔案"
-#: ../gio/glocalfileoutputstream.c:873
+#: ../gio/glocalfileoutputstream.c:837
msgid "The file was externally modified"
msgstr "該檔案已被外部程式修改過"
-#: ../gio/glocalfileoutputstream.c:1058
+#: ../gio/glocalfileoutputstream.c:1022
#, c-format
msgid "Error removing old file: %s"
msgstr "移除舊檔案時發生錯誤:%s"
-#: ../gio/gmemoryinputstream.c:483 ../gio/gmemoryoutputstream.c:734
+#: ../gio/gmemoryinputstream.c:473 ../gio/gmemoryoutputstream.c:736
msgid "Invalid GSeekType supplied"
msgstr "提供了無效的 GSeek 類型"
-#: ../gio/gmemoryinputstream.c:493
+#: ../gio/gmemoryinputstream.c:483
msgid "Invalid seek request"
msgstr "無效的搜尋要求"
-#: ../gio/gmemoryinputstream.c:517
+#: ../gio/gmemoryinputstream.c:507
msgid "Cannot truncate GMemoryInputStream"
msgstr "不能截短 GMemoryInputStream"
-#: ../gio/gmemoryoutputstream.c:530
+#: ../gio/gmemoryoutputstream.c:541
msgid "Memory output stream not resizable"
msgstr "記憶體輸出串流不能改變大小"
-#: ../gio/gmemoryoutputstream.c:546
+#: ../gio/gmemoryoutputstream.c:557
msgid "Failed to resize memory output stream"
msgstr "改變記憶體輸出串流的大小失敗"
-#: ../gio/gmemoryoutputstream.c:634
+#: ../gio/gmemoryoutputstream.c:645
msgid ""
"Amount of memory required to process the write is larger than available "
"address space"
msgstr "進行寫入所需的記憶體總額大於可用的位址空間"
-#: ../gio/gmemoryoutputstream.c:744
+#: ../gio/gmemoryoutputstream.c:746
msgid "Requested seek before the beginning of the stream"
msgstr "在串流的開頭之前要求的搜索"
-#: ../gio/gmemoryoutputstream.c:753
+#: ../gio/gmemoryoutputstream.c:755
msgid "Requested seek beyond the end of the stream"
msgstr "在串流的開頭之後要求的搜索"
#. Translators: This is an error
#. * message for mount objects that
#. * don't implement unmount.
-#: ../gio/gmount.c:363
+#: ../gio/gmount.c:395
msgid "mount doesn't implement \"unmount\""
msgstr "掛載點尚未實作卸載(umount)"
#. Translators: This is an error
#. * message for mount objects that
#. * don't implement eject.
-#: ../gio/gmount.c:438
+#: ../gio/gmount.c:471
msgid "mount doesn't implement \"eject\""
msgstr "掛載點尚未實作退出(eject)"
#. Translators: This is an error
#. * message for mount objects that
#. * don't implement any of unmount or unmount_with_operation.
-#: ../gio/gmount.c:515
+#: ../gio/gmount.c:549
msgid "mount doesn't implement \"unmount\" or \"unmount_with_operation\""
msgstr "掛載點尚未實作卸載(umount)或「umount_with_operation」"
#. Translators: This is an error
#. * message for mount objects that
#. * don't implement any of eject or eject_with_operation.
-#: ../gio/gmount.c:599
+#: ../gio/gmount.c:634
msgid "mount doesn't implement \"eject\" or \"eject_with_operation\""
msgstr "掛載點尚未實作退出(eject)或「eject_with_operation」"
#. Translators: This is an error
#. * message for mount objects that
#. * don't implement remount.
-#: ../gio/gmount.c:685
+#: ../gio/gmount.c:722
msgid "mount doesn't implement \"remount\""
msgstr "掛載點尚未實作重新掛載(remount)"
#. Translators: This is an error
#. * message for mount objects that
#. * don't implement content type guessing.
-#: ../gio/gmount.c:765
+#: ../gio/gmount.c:803
msgid "mount doesn't implement content type guessing"
msgstr "掛載點尚未實作內容類型預測"
#. Translators: This is an error
#. * message for mount objects that
#. * don't implement content type guessing.
-#: ../gio/gmount.c:850
+#: ../gio/gmount.c:889
msgid "mount doesn't implement synchronous content type guessing"
msgstr "掛載點尚未實作同步內容類型預測"
-#: ../gio/gnetworkaddress.c:322
+#: ../gio/gnetworkaddress.c:353
#, c-format
msgid "Hostname '%s' contains '[' but not ']'"
msgstr "主機名稱「%s」含有 '[' but not ']'"
-#: ../gio/gnetworkmonitorbase.c:178
+#: ../gio/gnetworkmonitorbase.c:191 ../gio/gnetworkmonitorbase.c:294
msgid "Network unreachable"
msgstr "無法連接網絡"
-#: ../gio/gnetworkmonitorbase.c:218
+#: ../gio/gnetworkmonitorbase.c:229 ../gio/gnetworkmonitorbase.c:259
msgid "Host unreachable"
msgstr "無法連接主機"
#: ../gio/gnetworkmonitornetlink.c:97 ../gio/gnetworkmonitornetlink.c:109
-#: ../gio/gnetworkmonitornetlink.c:120
+#: ../gio/gnetworkmonitornetlink.c:128
#, c-format
msgid "Could not create network monitor: %s"
msgstr "無法建立網絡監控:%s"
-#: ../gio/gnetworkmonitornetlink.c:129
+#: ../gio/gnetworkmonitornetlink.c:118
msgid "Could not create network monitor: "
msgstr "無法建立網絡監控:"
-#: ../gio/gnetworkmonitornetlink.c:177
+#: ../gio/gnetworkmonitornetlink.c:176
msgid "Could not get network status: "
msgstr "無法取得網絡狀態:"
-#: ../gio/goutputstream.c:212 ../gio/goutputstream.c:464
+#: ../gio/goutputstream.c:201 ../gio/goutputstream.c:453
msgid "Output stream doesn't implement write"
msgstr "輸出串流尚未實作寫入"
-#: ../gio/goutputstream.c:425 ../gio/goutputstream.c:1029
+#: ../gio/goutputstream.c:414 ../gio/goutputstream.c:939
msgid "Source stream is already closed"
msgstr "來源串流已經關閉"
-#: ../gio/gresolver.c:922
-#, c-format
-msgid "Error resolving '%s': %s"
-msgstr "解析「%s」時發生錯誤:%s"
-
-#: ../gio/gresolver.c:972
-#, c-format
-msgid "Error reverse-resolving '%s': %s"
-msgstr "反向解析「%s」時發生錯誤:%s"
-
-#: ../gio/gresolver.c:1175 ../gio/gresolver.c:1374
-#, c-format
-msgid "No DNS record of the requested type for '%s'"
-msgstr "「%s」的要求類型沒有 DNS 紀錄"
-
-#: ../gio/gresolver.c:1180 ../gio/gresolver.c:1379
-#, c-format
-msgid "Temporarily unable to resolve '%s'"
-msgstr "暫時無法解析「%s」"
-
-#: ../gio/gresolver.c:1185 ../gio/gresolver.c:1384
-#, c-format
-msgid "Error resolving '%s'"
-msgstr "解析「%s」時發生錯誤"
-
-#: ../gio/gresolver.c:1213 ../gio/gresolver.c:1274
-#, c-format
-msgid "Incomplete data received for '%s'"
-msgstr "收到「%s」的不完整資料"
-
-#: ../gio/gresource.c:295 ../gio/gresource.c:543 ../gio/gresource.c:560
-#: ../gio/gresource.c:681 ../gio/gresource.c:750 ../gio/gresource.c:811
-#: ../gio/gresource.c:891 ../gio/gresourcefile.c:452
-#: ../gio/gresourcefile.c:553 ../gio/gresourcefile.c:655
+#: ../gio/gresource.c:291 ../gio/gresource.c:539 ../gio/gresource.c:556
+#: ../gio/gresource.c:677 ../gio/gresource.c:746 ../gio/gresource.c:807
+#: ../gio/gresource.c:887 ../gio/gresourcefile.c:454
+#: ../gio/gresourcefile.c:555 ../gio/gresourcefile.c:657
#, c-format
msgid "The resource at '%s' does not exist"
msgstr "「%s」的資源不存在"
-#: ../gio/gresource.c:460
+#: ../gio/gresource.c:456
#, c-format
msgid "The resource at '%s' failed to decompress"
msgstr "「%s」的資源無法解壓縮"
-#: ../gio/gresourcefile.c:651
+#: ../gio/gresourcefile.c:653
#, c-format
msgid "The resource at '%s' is not a directory"
msgstr "「%s」的資源不是目錄"
-#: ../gio/gresourcefile.c:859
+#: ../gio/gresourcefile.c:861
msgid "Input stream doesn't implement seek"
msgstr "輸入串流尚未實作尋找"
-#: ../gio/gresource-tool.c:470 ../gio/gsettings-tool.c:530
+#: ../gio/gresource-tool.c:475 ../gio/gsettings-tool.c:542
msgid "Print help"
msgstr "顯示求助"
-#: ../gio/gresource-tool.c:471 ../gio/gresource-tool.c:539
+#: ../gio/gresource-tool.c:476 ../gio/gresource-tool.c:544
msgid "[COMMAND]"
msgstr "[指令]"
-#: ../gio/gresource-tool.c:476
+#: ../gio/gresource-tool.c:481
msgid "List sections containing resources in an elf FILE"
msgstr "列出 elf FILE 中包含資源的節區"
-#: ../gio/gresource-tool.c:482
+#: ../gio/gresource-tool.c:487
msgid ""
"List resources\n"
"If SECTION is given, only list resources in this section\n"
"如果指定 SECTION,只會列出這個節區的資源\n"
"如果指定 PATH,只會列出符合的資源"
-#: ../gio/gresource-tool.c:485 ../gio/gresource-tool.c:495
+#: ../gio/gresource-tool.c:490 ../gio/gresource-tool.c:500
msgid "FILE [PATH]"
msgstr "檔案 [路徑]"
-#: ../gio/gresource-tool.c:486 ../gio/gresource-tool.c:496
-#: ../gio/gresource-tool.c:503
+#: ../gio/gresource-tool.c:491 ../gio/gresource-tool.c:501
+#: ../gio/gresource-tool.c:508
msgid "SECTION"
msgstr "SECTION"
-#: ../gio/gresource-tool.c:491
+#: ../gio/gresource-tool.c:496
msgid ""
"List resources with details\n"
"If SECTION is given, only list resources in this section\n"
"如果指定 PATH,只會列出符合的資源\n"
"詳細資料包含節區、大小和壓縮率"
-#: ../gio/gresource-tool.c:501
+#: ../gio/gresource-tool.c:506
msgid "Extract a resource file to stdout"
msgstr "解壓縮資源檔案到 stdout"
-#: ../gio/gresource-tool.c:502
+#: ../gio/gresource-tool.c:507
msgid "FILE PATH"
msgstr "檔案路徑"
-#: ../gio/gresource-tool.c:508 ../gio/gsettings-tool.c:610
+#: ../gio/gresource-tool.c:513 ../gio/gsettings-tool.c:628
#, c-format
msgid ""
"Unknown command %s\n"
"不明指令 %s\n"
"\n"
-#: ../gio/gresource-tool.c:516
+#: ../gio/gresource-tool.c:521
msgid ""
"Usage:\n"
" gresource [--section SECTION] COMMAND [ARGS...]\n"
"使用 'gresource help COMMAND' 以取得詳細的說明文件。\n"
"\n"
-#: ../gio/gresource-tool.c:530
+#: ../gio/gresource-tool.c:535
#, c-format
msgid ""
"Usage:\n"
"%s\n"
"\n"
-#: ../gio/gresource-tool.c:533 ../gio/gsettings-tool.c:643
+#: ../gio/gresource-tool.c:538 ../gio/gsettings-tool.c:661
msgid "Arguments:\n"
msgstr "引數:\n"
-#: ../gio/gresource-tool.c:537
+#: ../gio/gresource-tool.c:542
msgid " SECTION An (optional) elf section name\n"
msgstr " SECTION 一個 (選擇性的) elf 節區名稱\n"
-#: ../gio/gresource-tool.c:541 ../gio/gsettings-tool.c:650
+#: ../gio/gresource-tool.c:546 ../gio/gsettings-tool.c:668
msgid " COMMAND The (optional) command to explain\n"
msgstr " COMMAND 要解釋的(選擇性)指令\n"
-#: ../gio/gresource-tool.c:547
+#: ../gio/gresource-tool.c:552
msgid " FILE An elf file (a binary or a shared library)\n"
msgstr " FILE 一個 elf 檔案 (二元檔或共享程式庫)\n"
-#: ../gio/gresource-tool.c:550
+#: ../gio/gresource-tool.c:555
msgid ""
" FILE An elf file (a binary or a shared library)\n"
" or a compiled resource file\n"
" FILE 一個 elf 檔案 (二元檔或共享程式庫)\n"
" 或編譯過的資源檔案\n"
-#: ../gio/gresource-tool.c:554
+#: ../gio/gresource-tool.c:559
msgid "[PATH]"
msgstr "[路徑]"
-#: ../gio/gresource-tool.c:556
+#: ../gio/gresource-tool.c:561
msgid " PATH An (optional) resource path (may be partial)\n"
msgstr " PATH 一個 (選擇性的) 資源路徑 (可能為部分)\n"
-#: ../gio/gresource-tool.c:557
+#: ../gio/gresource-tool.c:562
msgid "PATH"
msgstr "路徑"
-#: ../gio/gresource-tool.c:559
+#: ../gio/gresource-tool.c:564
msgid " PATH A resource path\n"
msgstr " PATH 資源路徑\n"
-#: ../gio/gsettings-tool.c:53 ../gio/gsettings-tool.c:74
+#: ../gio/gsettings-tool.c:57 ../gio/gsettings-tool.c:78
#, c-format
msgid "No such schema '%s'\n"
msgstr "沒有這個 schema「%s」\n"
-#: ../gio/gsettings-tool.c:59
+#: ../gio/gsettings-tool.c:63
#, c-format
msgid "Schema '%s' is not relocatable (path must not be specified)\n"
msgstr "Schema「%s」不是可重新配置的(路徑不能指定)\n"
-#: ../gio/gsettings-tool.c:80
+#: ../gio/gsettings-tool.c:84
#, c-format
msgid "Schema '%s' is relocatable (path must be specified)\n"
msgstr "Schema「%s」是可重新配置的(路徑必須指定)\n"
-#: ../gio/gsettings-tool.c:94
+#: ../gio/gsettings-tool.c:98
#, c-format
msgid "Empty path given.\n"
msgstr "指定了空白的路徑。\n"
-#: ../gio/gsettings-tool.c:100
+#: ../gio/gsettings-tool.c:104
#, c-format
msgid "Path must begin with a slash (/)\n"
msgstr "路徑不能以斜線 (/) 開頭\n"
-#: ../gio/gsettings-tool.c:106
+#: ../gio/gsettings-tool.c:110
#, c-format
msgid "Path must end with a slash (/)\n"
msgstr "路徑不能以斜線 (/) 結尾\n"
-#: ../gio/gsettings-tool.c:112
+#: ../gio/gsettings-tool.c:116
#, c-format
msgid "Path must not contain two adjacent slashes (//)\n"
msgstr "路徑不能包含兩個相鄰的斜線 (//)\n"
-#: ../gio/gsettings-tool.c:133
+#: ../gio/gsettings-tool.c:137
#, c-format
msgid "No such key '%s'\n"
msgstr "沒有設定鍵「%s」\n"
-#: ../gio/gsettings-tool.c:503
+#: ../gio/gsettings-tool.c:511
#, c-format
msgid "The provided value is outside of the valid range\n"
msgstr "提供的數值超出了有效的範圍\n"
-#: ../gio/gsettings-tool.c:536
+#: ../gio/gsettings-tool.c:518
+#, c-format
+msgid "The key is not writable\n"
+msgstr "這個設定鍵無法寫入\n"
+
+#: ../gio/gsettings-tool.c:548
+msgid "Print version information and exit"
+msgstr "輸出版本資訊並離開"
+
+#: ../gio/gsettings-tool.c:554
msgid "List the installed (non-relocatable) schemas"
msgstr "列出已安裝的(非-可重新配置)schema"
-#: ../gio/gsettings-tool.c:542
+#: ../gio/gsettings-tool.c:560
msgid "List the installed relocatable schemas"
msgstr "列出已安裝的可重新配置 schema"
-#: ../gio/gsettings-tool.c:548
+#: ../gio/gsettings-tool.c:566
msgid "List the keys in SCHEMA"
msgstr "列出 SCHEMA 中的設定鍵"
-#: ../gio/gsettings-tool.c:549 ../gio/gsettings-tool.c:555
-#: ../gio/gsettings-tool.c:592
+#: ../gio/gsettings-tool.c:567 ../gio/gsettings-tool.c:573
+#: ../gio/gsettings-tool.c:610
msgid "SCHEMA[:PATH]"
msgstr "SCHEMA[:PATH]"
-#: ../gio/gsettings-tool.c:554
+#: ../gio/gsettings-tool.c:572
msgid "List the children of SCHEMA"
msgstr "列出 SCHEMA 的子項"
-#: ../gio/gsettings-tool.c:560
+#: ../gio/gsettings-tool.c:578
msgid ""
"List keys and values, recursively\n"
"If no SCHEMA is given, list all keys\n"
"遞迴的列出設定鍵與鍵值\n"
"如果沒有指定 SCHEMA,列出所有設定鍵\n"
-#: ../gio/gsettings-tool.c:562
+#: ../gio/gsettings-tool.c:580
msgid "[SCHEMA[:PATH]]"
msgstr "[SCHEMA[:PATH]]"
-#: ../gio/gsettings-tool.c:567
+#: ../gio/gsettings-tool.c:585
msgid "Get the value of KEY"
msgstr "取得 KEY 的數值"
-#: ../gio/gsettings-tool.c:568 ../gio/gsettings-tool.c:574
-#: ../gio/gsettings-tool.c:586 ../gio/gsettings-tool.c:598
+#: ../gio/gsettings-tool.c:586 ../gio/gsettings-tool.c:592
+#: ../gio/gsettings-tool.c:604 ../gio/gsettings-tool.c:616
msgid "SCHEMA[:PATH] KEY"
msgstr "SCHEMA[:PATH] KEY"
-#: ../gio/gsettings-tool.c:573
+#: ../gio/gsettings-tool.c:591
msgid "Query the range of valid values for KEY"
msgstr "查詢 KEY 有效數值的範圍"
-#: ../gio/gsettings-tool.c:579
+#: ../gio/gsettings-tool.c:597
msgid "Set the value of KEY to VALUE"
msgstr "將 KEY 的數值設定為 VALUE"
-#: ../gio/gsettings-tool.c:580
+#: ../gio/gsettings-tool.c:598
msgid "SCHEMA[:PATH] KEY VALUE"
msgstr "SCHEMA[:PATH] KEY VALUE"
-#: ../gio/gsettings-tool.c:585
+#: ../gio/gsettings-tool.c:603
msgid "Reset KEY to its default value"
msgstr "將 KEY 設定為預設值"
-#: ../gio/gsettings-tool.c:591
+#: ../gio/gsettings-tool.c:609
msgid "Reset all keys in SCHEMA to their defaults"
msgstr "將 SCHEMA 的所有設定鍵重設為預設值"
-#: ../gio/gsettings-tool.c:597
+#: ../gio/gsettings-tool.c:615
msgid "Check if KEY is writable"
msgstr "檢查 KEY 是否可寫入"
-#: ../gio/gsettings-tool.c:603
+#: ../gio/gsettings-tool.c:621
msgid ""
"Monitor KEY for changes.\n"
"If no KEY is specified, monitor all keys in SCHEMA.\n"
"如果沒有指定 KEY,會監控 SCHEMA 的所有設定鍵。\n"
"使用 ^C 可停止監控。\n"
-#: ../gio/gsettings-tool.c:606
+#: ../gio/gsettings-tool.c:624
msgid "SCHEMA[:PATH] [KEY]"
msgstr "SCHEMA[:PATH] [KEY]"
-#: ../gio/gsettings-tool.c:618
+#: ../gio/gsettings-tool.c:636
msgid ""
"Usage:\n"
" gsettings [--schemadir SCHEMADIR] COMMAND [ARGS...]\n"
"使用「gsettings help COMMAND」取得詳細的說明。\n"
"\n"
-#: ../gio/gsettings-tool.c:640
+#: ../gio/gsettings-tool.c:658
#, c-format
msgid ""
"Usage:\n"
"%s\n"
"\n"
-#: ../gio/gsettings-tool.c:646
+#: ../gio/gsettings-tool.c:664
msgid " SCHEMADIR A directory to search for additional schemas\n"
msgstr " SCHEMADIR 搜尋額外 schema 的目錄\n"
-#: ../gio/gsettings-tool.c:654
+#: ../gio/gsettings-tool.c:672
msgid ""
" SCHEMA The name of the schema\n"
" PATH The path, for relocatable schemas\n"
" SCHEMA 這個 schema 的名稱\n"
" PATH 路徑,用於可重新配置的 schema\n"
-#: ../gio/gsettings-tool.c:659
+#: ../gio/gsettings-tool.c:677
msgid " KEY The (optional) key within the schema\n"
msgstr " KEY schema 中的(選擇性的)設定鍵\n"
-#: ../gio/gsettings-tool.c:663
+#: ../gio/gsettings-tool.c:681
msgid " KEY The key within the schema\n"
msgstr " KEY schema 中的設定鍵\n"
-#: ../gio/gsettings-tool.c:667
+#: ../gio/gsettings-tool.c:685
msgid " VALUE The value to set\n"
msgstr " VALUE 要設定的數值\n"
-#: ../gio/gsettings-tool.c:788
+#: ../gio/gsettings-tool.c:744
+#, c-format
+msgid "Could not load schemas from %s: %s\n"
+msgstr "無法載入 %s 的 schema:%s\n"
+
+#: ../gio/gsettings-tool.c:806
#, c-format
msgid "Empty schema name given\n"
msgstr "指定了空的 schema 名稱\n"
-#: ../gio/gsocket.c:286
+#: ../gio/gsocket.c:312
msgid "Invalid socket, not initialized"
msgstr "無效的 socket,尚未初始化"
-#: ../gio/gsocket.c:293
+#: ../gio/gsocket.c:319
#, c-format
msgid "Invalid socket, initialization failed due to: %s"
msgstr "無效的 socket,初始化失敗原因為:%s"
-#: ../gio/gsocket.c:301
+#: ../gio/gsocket.c:327
msgid "Socket is already closed"
msgstr "Socket 已經關閉"
-#: ../gio/gsocket.c:309 ../gio/gsocket.c:3529 ../gio/gsocket.c:3584
+#: ../gio/gsocket.c:335 ../gio/gsocket.c:3510 ../gio/gsocket.c:3565
msgid "Socket I/O timed out"
msgstr "Socket I/O 逾時"
-#: ../gio/gsocket.c:476
+#: ../gio/gsocket.c:482
#, c-format
msgid "creating GSocket from fd: %s"
msgstr "正在從 fd 建立 GSocket:%s"
-#: ../gio/gsocket.c:510 ../gio/gsocket.c:517 ../gio/gsocket.c:533
+#: ../gio/gsocket.c:510 ../gio/gsocket.c:564 ../gio/gsocket.c:571
#, c-format
msgid "Unable to create socket: %s"
msgstr "無法建立 socket:%s"
-#: ../gio/gsocket.c:510
+#: ../gio/gsocket.c:564
msgid "Unknown family was specified"
msgstr "指定了不明的字族"
-#: ../gio/gsocket.c:517
+#: ../gio/gsocket.c:571
msgid "Unknown protocol was specified"
msgstr "指定了不明的通訊協定"
-#: ../gio/gsocket.c:1722
+#: ../gio/gsocket.c:1727
#, c-format
msgid "could not get local address: %s"
msgstr "無法取得本地端位址:%s"
-#: ../gio/gsocket.c:1765
+#: ../gio/gsocket.c:1770
#, c-format
msgid "could not get remote address: %s"
msgstr "無法取得遠端位址:%s"
-#: ../gio/gsocket.c:1826
+#: ../gio/gsocket.c:1831
#, c-format
msgid "could not listen: %s"
msgstr "無法聽取:%s"
-#: ../gio/gsocket.c:1900
+#: ../gio/gsocket.c:1903
#, c-format
msgid "Error binding to address: %s"
msgstr "綁定至位址時發生錯誤:%s"
-#: ../gio/gsocket.c:1953 ../gio/gsocket.c:1989
+#: ../gio/gsocket.c:1956 ../gio/gsocket.c:1993
#, c-format
msgid "Error joining multicast group: %s"
msgstr "加入多點廣播羣組時發生錯誤:%s"
-#: ../gio/gsocket.c:1954 ../gio/gsocket.c:1990
+#: ../gio/gsocket.c:1957 ../gio/gsocket.c:1994
#, c-format
msgid "Error leaving multicast group: %s"
msgstr "離開多點廣播羣組時發生錯誤:%s"
-#: ../gio/gsocket.c:1955
+#: ../gio/gsocket.c:1958
msgid "No support for source-specific multicast"
msgstr "不支援指定來源的多點廣播"
-#: ../gio/gsocket.c:2174
+#: ../gio/gsocket.c:2177
#, c-format
msgid "Error accepting connection: %s"
msgstr "接受連線時發生錯誤:%s"
-#: ../gio/gsocket.c:2295
+#: ../gio/gsocket.c:2298
msgid "Connection in progress"
msgstr "連線進行中"
-#: ../gio/gsocket.c:2347 ../gio/gsocket.c:4326
-#, c-format
-msgid "Unable to get pending error: %s"
-msgstr "無法取得未處理的錯誤:%s"
+#: ../gio/gsocket.c:2345
+msgid "Unable to get pending error: "
+msgstr "無法取得未處理的錯誤:"
-#: ../gio/gsocket.c:2517
+#: ../gio/gsocket.c:2511
#, c-format
msgid "Error receiving data: %s"
msgstr "接收資料時發生錯誤:%s"
-#: ../gio/gsocket.c:2695
+#: ../gio/gsocket.c:2689
#, c-format
msgid "Error sending data: %s"
msgstr "傳送資料時發生錯誤:%s"
-#: ../gio/gsocket.c:2809
+#: ../gio/gsocket.c:2803
#, c-format
msgid "Unable to shutdown socket: %s"
msgstr "無法關閉 socket:%s"
-#: ../gio/gsocket.c:2888
+#: ../gio/gsocket.c:2882
#, c-format
msgid "Error closing socket: %s"
msgstr "關閉 socket 時發生錯誤:%s"
-#: ../gio/gsocket.c:3522
+#: ../gio/gsocket.c:3503
#, c-format
msgid "Waiting for socket condition: %s"
msgstr "等候 socket 情況:%s"
-#: ../gio/gsocket.c:3800 ../gio/gsocket.c:3881
+#: ../gio/gsocket.c:3781 ../gio/gsocket.c:3862
#, c-format
msgid "Error sending message: %s"
msgstr "傳送訊息時發生錯誤:%s"
-#: ../gio/gsocket.c:3825
+#: ../gio/gsocket.c:3806
msgid "GSocketControlMessage not supported on Windows"
msgstr "視窗不支援 GSocketControlMessage"
-#: ../gio/gsocket.c:4105 ../gio/gsocket.c:4241
+#: ../gio/gsocket.c:4140 ../gio/gsocket.c:4275
#, c-format
msgid "Error receiving message: %s"
msgstr "取回郵件發生錯誤:%s"
-#: ../gio/gsocket.c:4345
+#: ../gio/gsocket.c:4357
+#, c-format
+msgid "Unable to read socket credentials: %s"
+msgstr "無法讀取 socket 機密:%s"
+
+#: ../gio/gsocket.c:4376
msgid "g_socket_get_credentials not implemented for this OS"
msgstr "g_socket_get_credentials 沒有在這個 OS 上實作"
-#: ../gio/gsocketclient.c:174
+#: ../gio/gsocketclient.c:177
#, c-format
msgid "Could not connect to proxy server %s: "
msgstr "無法連線到代理伺服器 %s:"
-#: ../gio/gsocketclient.c:188
+#: ../gio/gsocketclient.c:191
#, c-format
msgid "Could not connect to %s: "
msgstr "無法連接到 %s:"
-#: ../gio/gsocketclient.c:190
+#: ../gio/gsocketclient.c:193
msgid "Could not connect: "
msgstr "無法連接:"
-#: ../gio/gsocketclient.c:976 ../gio/gsocketclient.c:1547
+#: ../gio/gsocketclient.c:1067 ../gio/gsocketclient.c:1631
msgid "Unknown error on connect"
msgstr "連線時有不明的錯誤"
-#: ../gio/gsocketclient.c:1029 ../gio/gsocketclient.c:1486
+#: ../gio/gsocketclient.c:1120 ../gio/gsocketclient.c:1569
msgid "Proxying over a non-TCP connection is not supported."
msgstr "不支援嘗試透過非-TCP 連線使用代理伺服器。"
-#: ../gio/gsocketclient.c:1055 ../gio/gsocketclient.c:1507
+#: ../gio/gsocketclient.c:1146 ../gio/gsocketclient.c:1590
#, c-format
msgid "Proxy protocol '%s' is not supported."
msgstr "指定的通訊協定「%s」不被支援。"
-#: ../gio/gsocketlistener.c:191
+#: ../gio/gsocketlistener.c:187
msgid "Listener is already closed"
msgstr "聽取程式已經關閉"
-#: ../gio/gsocketlistener.c:232
+#: ../gio/gsocketlistener.c:228
msgid "Added socket is closed"
msgstr "加入的 socket 已經關閉"
-#: ../gio/gsocks4aproxy.c:121
+#: ../gio/gsocks4aproxy.c:120
#, c-format
msgid "SOCKSv4 does not support IPv6 address '%s'"
msgstr "SOCKSv4 不支援 IPv6 位址「%s」"
-#: ../gio/gsocks4aproxy.c:139
+#: ../gio/gsocks4aproxy.c:138
msgid "Username is too long for SOCKSv4 protocol"
msgstr "使用者名稱對 SOCKSv4 通訊協定"
-#: ../gio/gsocks4aproxy.c:156
+#: ../gio/gsocks4aproxy.c:155
#, c-format
msgid "Hostname '%s' is too long for SOCKSv4 protocol"
msgstr "主機名稱「%s」對 SOCKSv4 通訊協定來說太長了"
-#: ../gio/gsocks4aproxy.c:182
+#: ../gio/gsocks4aproxy.c:181
msgid "The server is not a SOCKSv4 proxy server."
msgstr "伺服器不是 SOCKSv4 代理伺服器。"
-#: ../gio/gsocks4aproxy.c:189
+#: ../gio/gsocks4aproxy.c:188
msgid "Connection through SOCKSv4 server was rejected"
msgstr "透過 SOCKSv4 伺服器連線被拒絕"
msgid "Can't handle version %d of GThemedIcon encoding"
msgstr "不能處理版本為 %d 的 GThemedIcon 編碼"
-#: ../gio/gtlscertificate.c:286
+#: ../gio/gthreadedresolver.c:110
+#, c-format
+msgid "Error resolving '%s': %s"
+msgstr "解析「%s」時發生錯誤:%s"
+
+#: ../gio/gthreadedresolver.c:195
+#, c-format
+msgid "Error reverse-resolving '%s': %s"
+msgstr "反向解析「%s」時發生錯誤:%s"
+
+#: ../gio/gthreadedresolver.c:533 ../gio/gthreadedresolver.c:614
+#: ../gio/gthreadedresolver.c:715 ../gio/gthreadedresolver.c:766
+#, c-format
+msgid "No DNS record of the requested type for '%s'"
+msgstr "「%s」的要求類型沒有 DNS 紀錄"
+
+#: ../gio/gthreadedresolver.c:538 ../gio/gthreadedresolver.c:720
+#, c-format
+msgid "Temporarily unable to resolve '%s'"
+msgstr "暫時無法解析「%s」"
+
+#: ../gio/gthreadedresolver.c:543 ../gio/gthreadedresolver.c:725
+#, c-format
+msgid "Error resolving '%s'"
+msgstr "解析「%s」時發生錯誤"
+
+#: ../gio/gtlscertificate.c:248
msgid "Cannot decrypt PEM-encoded private key"
msgstr "不能解鎖 PEM 編碼的私人密碼匙"
-#: ../gio/gtlscertificate.c:291
+#: ../gio/gtlscertificate.c:253
msgid "No PEM-encoded private key found"
msgstr "找不到 PEM 編碼的私人密碼匙"
-#: ../gio/gtlscertificate.c:301
+#: ../gio/gtlscertificate.c:263
msgid "Could not parse PEM-encoded private key"
msgstr "無法解析 PEM 編碼的私人密碼匙"
-#: ../gio/gtlscertificate.c:326
+#: ../gio/gtlscertificate.c:288
msgid "No PEM-encoded certificate found"
msgstr "找到非 PEM 編碼的證書"
-#: ../gio/gtlscertificate.c:335
+#: ../gio/gtlscertificate.c:297
msgid "Could not parse PEM-encoded certificate"
msgstr "無法解析 PEM 編碼的證書"
-#: ../gio/gtlspassword.c:114
+#: ../gio/gtlspassword.c:113
msgid ""
"This is the last chance to enter the password correctly before your access "
"is locked out."
msgstr "這是在你的存取被鎖定之前最後輸入密碼的機會。"
-#: ../gio/gtlspassword.c:116
+#: ../gio/gtlspassword.c:115
msgid ""
"Several password entered have been incorrect, and your access will be locked "
"out after further failures."
msgstr "你已經輸入多入不正確的密碼,如果接下來還是輸入錯誤將會鎖定你的存取權限。"
-#: ../gio/gtlspassword.c:118
+#: ../gio/gtlspassword.c:117
msgid "The password entered is incorrect."
msgstr "輸入的密碼是不正確的。"
-#: ../gio/gunixconnection.c:164 ../gio/gunixconnection.c:579
+#: ../gio/gunixconnection.c:159 ../gio/gunixconnection.c:554
#, c-format
msgid "Expecting 1 control message, got %d"
-msgstr "預期有 1 個控制訊息,卻收到 %d"
+msgid_plural "Expecting 1 control message, got %d"
+msgstr[0] "預期有 1 個控制訊息,卻收到 %d"
-#: ../gio/gunixconnection.c:177 ../gio/gunixconnection.c:589
+#: ../gio/gunixconnection.c:175 ../gio/gunixconnection.c:566
msgid "Unexpected type of ancillary data"
msgstr "輔助資料的未預期類型"
-#: ../gio/gunixconnection.c:195
+#: ../gio/gunixconnection.c:193
#, c-format
msgid "Expecting one fd, but got %d\n"
-msgstr "預期有 1 個 fd,卻收到 %d\n"
+msgid_plural "Expecting one fd, but got %d\n"
+msgstr[0] "預期有 1 個 fd,卻收到 %d\n"
-#: ../gio/gunixconnection.c:211
+#: ../gio/gunixconnection.c:212
msgid "Received invalid fd"
msgstr "收到無效的 fd"
-#: ../gio/gunixconnection.c:347
+#: ../gio/gunixconnection.c:348
msgid "Error sending credentials: "
msgstr "傳送證書時發生錯誤:"
-#: ../gio/gunixconnection.c:510
+#: ../gio/gunixconnection.c:496
#, c-format
msgid "Error checking if SO_PASSCRED is enabled for socket: %s"
msgstr "檢查 SO_PASSCRED 在 socket 是否啟用時發生錯誤:%s"
-#: ../gio/gunixconnection.c:519
-#, c-format
-msgid ""
-"Unexpected option length while checking if SO_PASSCRED is enabled for "
-"socket. Expected %d bytes, got %d"
-msgstr "檢查 SO_PASSCRED 在 socket 是否啟用時有未預期的選項長度。預期為 %d 位元組,得到 %d"
-
-#: ../gio/gunixconnection.c:536
+#: ../gio/gunixconnection.c:511
#, c-format
msgid "Error enabling SO_PASSCRED: %s"
msgstr "啟用 SO_PASSCRED 時發生錯誤:%s"
-#: ../gio/gunixconnection.c:565
+#: ../gio/gunixconnection.c:540
msgid ""
"Expecting to read a single byte for receiving credentials but read zero bytes"
msgstr "預期接收證書要讀取單一位元組,但讀取到零位元組"
-#: ../gio/gunixconnection.c:603
+#: ../gio/gunixconnection.c:580
#, c-format
msgid "Not expecting control message, but got %d"
msgstr "不是預期的控制訊息,卻收到 %d"
-#: ../gio/gunixconnection.c:629
+#: ../gio/gunixconnection.c:604
#, c-format
msgid "Error while disabling SO_PASSCRED: %s"
msgstr "停用 SO_PASSCRED 時發生錯誤:%s"
-#: ../gio/gunixinputstream.c:382 ../gio/gunixinputstream.c:403
+#: ../gio/gunixinputstream.c:372 ../gio/gunixinputstream.c:393
#, c-format
msgid "Error reading from file descriptor: %s"
msgstr "讀取檔案描述狀態時發生錯誤:%s"
-#: ../gio/gunixinputstream.c:438 ../gio/gunixinputstream.c:510
-#: ../gio/gunixoutputstream.c:424 ../gio/gunixoutputstream.c:465
+#: ../gio/gunixinputstream.c:426 ../gio/gunixoutputstream.c:412
#, c-format
msgid "Error closing file descriptor: %s"
msgstr "關閉檔案描述狀態時發生錯誤:%s"
-#: ../gio/gunixmounts.c:1983 ../gio/gunixmounts.c:2020
+#: ../gio/gunixmounts.c:1985 ../gio/gunixmounts.c:2038
msgid "Filesystem root"
msgstr "根檔案系統"
-#: ../gio/gunixoutputstream.c:368 ../gio/gunixoutputstream.c:389
+#: ../gio/gunixoutputstream.c:358 ../gio/gunixoutputstream.c:379
#, c-format
msgid "Error writing to file descriptor: %s"
msgstr "寫入檔案描述狀態時發生錯誤:%s"
-#: ../gio/gunixsocketaddress.c:244
+#: ../gio/gunixsocketaddress.c:234
msgid "Abstract UNIX domain socket addresses not supported on this system"
msgstr "這個系統不支授抽象 UNIX 網域 socket 位址"
-#: ../gio/gvolume.c:404
+#: ../gio/gvolume.c:439
msgid "volume doesn't implement eject"
msgstr "儲存區尚未實作退出(eject)"
#. Translators: This is an error
#. * message for volume objects that
#. * don't implement any of eject or eject_with_operation.
-#: ../gio/gvolume.c:480
+#: ../gio/gvolume.c:516
msgid "volume doesn't implement eject or eject_with_operation"
msgstr "儲存區尚未實作退出(eject) 或 eject_with_operation"
msgid "Association creation not supported on win32"
msgstr "關聯建立在 win32 上不支援"
-#: ../gio/gwin32inputstream.c:355
+#: ../gio/gwin32inputstream.c:343
#, c-format
msgid "Error reading from handle: %s"
msgstr "從處理器讀取時發生錯誤:%s"
-#: ../gio/gwin32inputstream.c:387 ../gio/gwin32outputstream.c:375
+#: ../gio/gwin32inputstream.c:375 ../gio/gwin32outputstream.c:362
#, c-format
msgid "Error closing handle: %s"
msgstr "關閉處理器時發生錯誤:%s"
-#: ../gio/gwin32outputstream.c:343
+#: ../gio/gwin32outputstream.c:330
#, c-format
msgid "Error writing to handle: %s"
msgstr "寫入至處理器時發生錯誤:%s"
msgid "Print address in shell mode"
msgstr "以系統殼模式顯示位址"
-#: ../gio/tests/gdbus-daemon.c:30
+#: ../gio/tests/gdbus-daemon.c:28
msgid "Run a dbus service"
msgstr "執行 dbus 服務"
-#: ../gio/tests/gdbus-daemon.c:44
+#: ../gio/tests/gdbus-daemon.c:42
#, c-format
msgid "Wrong args\n"
msgstr "錯誤引數\n"
msgid "Unexpected tag '%s' inside '%s'"
msgstr "「%2$s」中有未預期的標籤「%1$s」"
-#: ../glib/gbookmarkfile.c:1806
+#: ../glib/gbookmarkfile.c:1798
msgid "No valid bookmark file found in data dirs"
msgstr "在資料目錄中找不到有效的書籤檔案"
-#: ../glib/gbookmarkfile.c:2007
+#: ../glib/gbookmarkfile.c:1999
#, c-format
msgid "A bookmark for URI '%s' already exists"
msgstr "URI「%s」的書籤已經存在"
-#: ../glib/gbookmarkfile.c:2053 ../glib/gbookmarkfile.c:2211
-#: ../glib/gbookmarkfile.c:2296 ../glib/gbookmarkfile.c:2376
-#: ../glib/gbookmarkfile.c:2461 ../glib/gbookmarkfile.c:2544
-#: ../glib/gbookmarkfile.c:2622 ../glib/gbookmarkfile.c:2701
-#: ../glib/gbookmarkfile.c:2743 ../glib/gbookmarkfile.c:2840
-#: ../glib/gbookmarkfile.c:2960 ../glib/gbookmarkfile.c:3150
-#: ../glib/gbookmarkfile.c:3226 ../glib/gbookmarkfile.c:3391
-#: ../glib/gbookmarkfile.c:3480 ../glib/gbookmarkfile.c:3570
-#: ../glib/gbookmarkfile.c:3698
+#: ../glib/gbookmarkfile.c:2045 ../glib/gbookmarkfile.c:2203
+#: ../glib/gbookmarkfile.c:2288 ../glib/gbookmarkfile.c:2368
+#: ../glib/gbookmarkfile.c:2453 ../glib/gbookmarkfile.c:2536
+#: ../glib/gbookmarkfile.c:2614 ../glib/gbookmarkfile.c:2693
+#: ../glib/gbookmarkfile.c:2735 ../glib/gbookmarkfile.c:2832
+#: ../glib/gbookmarkfile.c:2952 ../glib/gbookmarkfile.c:3142
+#: ../glib/gbookmarkfile.c:3218 ../glib/gbookmarkfile.c:3386
+#: ../glib/gbookmarkfile.c:3475 ../glib/gbookmarkfile.c:3565
+#: ../glib/gbookmarkfile.c:3693
#, c-format
msgid "No bookmark found for URI '%s'"
msgstr "找不到 URI「%s」的書籤"
-#: ../glib/gbookmarkfile.c:2385
+#: ../glib/gbookmarkfile.c:2377
#, c-format
msgid "No MIME type defined in the bookmark for URI '%s'"
msgstr "URI「%s」書籤中沒有定義 MIME 類型"
-#: ../glib/gbookmarkfile.c:2470
+#: ../glib/gbookmarkfile.c:2462
#, c-format
msgid "No private flag has been defined in bookmark for URI '%s'"
msgstr "URI「%s」書籤中沒有私有旗幟"
-#: ../glib/gbookmarkfile.c:2849
+#: ../glib/gbookmarkfile.c:2841
#, c-format
msgid "No groups set in bookmark for URI '%s'"
msgstr "URI「%s」書籤中沒有設定羣組"
-#: ../glib/gbookmarkfile.c:3244 ../glib/gbookmarkfile.c:3401
+#: ../glib/gbookmarkfile.c:3239 ../glib/gbookmarkfile.c:3396
#, c-format
msgid "No application with name '%s' registered a bookmark for '%s'"
msgstr "沒有名為「%s」的應用程式註冊書籤「%s」"
-#: ../glib/gbookmarkfile.c:3424
+#: ../glib/gbookmarkfile.c:3419
#, c-format
msgid "Failed to expand exec line '%s' with URI '%s'"
msgstr "以 URI‘%2$s’ 展開 exec 行‘%1$s’失敗"
-#: ../glib/gconvert.c:807 ../glib/gutf8.c:837 ../glib/gutf8.c:1047
-#: ../glib/gutf8.c:1184 ../glib/gutf8.c:1288
+#: ../glib/gconvert.c:506 ../glib/gutf8.c:829 ../glib/gutf8.c:1039
+#: ../glib/gutf8.c:1176 ../glib/gutf8.c:1280
msgid "Partial character sequence at end of input"
msgstr "輸入資料結束時字符仍未完整"
-#: ../glib/gconvert.c:1057
+#: ../glib/gconvert.c:756
#, c-format
msgid "Cannot convert fallback '%s' to codeset '%s'"
msgstr "無法將後備字串‘%s’的字符集轉換成‘%s’"
-#: ../glib/gconvert.c:1874
+#: ../glib/gconvert.c:1574
#, c-format
msgid "The URI '%s' is not an absolute URI using the \"file\" scheme"
msgstr "URI‘%s’不是使用“file”格式的絕對 URI"
-#: ../glib/gconvert.c:1884
+#: ../glib/gconvert.c:1584
#, c-format
msgid "The local file URI '%s' may not include a '#'"
msgstr "本機檔案的 URI‘%s’不應含有‘#’"
-#: ../glib/gconvert.c:1901
+#: ../glib/gconvert.c:1601
#, c-format
msgid "The URI '%s' is invalid"
msgstr "URI‘%s’無效"
-#: ../glib/gconvert.c:1913
+#: ../glib/gconvert.c:1613
#, c-format
msgid "The hostname of the URI '%s' is invalid"
msgstr "URI‘%s’中的主機名稱無效"
-#: ../glib/gconvert.c:1929
+#: ../glib/gconvert.c:1629
#, c-format
msgid "The URI '%s' contains invalidly escaped characters"
msgstr "URI‘%s’含有「不正確跳出」的字符"
-#: ../glib/gconvert.c:2024
+#: ../glib/gconvert.c:1724
#, c-format
msgid "The pathname '%s' is not an absolute path"
msgstr "路徑名稱‘%s’不是絕對路徑"
-#: ../glib/gconvert.c:2034
+#: ../glib/gconvert.c:1734
msgid "Invalid hostname"
msgstr "主機名稱無效"
msgid "Sun"
msgstr "週日"
-#: ../glib/gdir.c:121 ../glib/gdir.c:144
+#: ../glib/gdir.c:120 ../glib/gdir.c:143
#, c-format
msgid "Error opening directory '%s': %s"
msgstr "開啟目錄‘%s’時發生錯誤:%s"
-#: ../glib/gfileutils.c:675 ../glib/gfileutils.c:763
+#: ../glib/gfileutils.c:671 ../glib/gfileutils.c:759
#, c-format
-msgid "Could not allocate %lu bytes to read file \"%s\""
-msgstr "無法配置 %lu 位元來讀取檔案“%s”"
+msgid "Could not allocate %lu byte to read file \"%s\""
+msgid_plural "Could not allocate %lu bytes to read file \"%s\""
+msgstr[0] "無法配置 %lu 位元組來讀取檔案「%s」"
-#: ../glib/gfileutils.c:690
+#: ../glib/gfileutils.c:686
#, c-format
msgid "Error reading file '%s': %s"
msgstr "讀取檔案‘%s’時發生錯誤:%s"
-#: ../glib/gfileutils.c:704
+#: ../glib/gfileutils.c:700
#, c-format
msgid "File \"%s\" is too large"
msgstr "檔案「%s」太過巨大"
-#: ../glib/gfileutils.c:787
+#: ../glib/gfileutils.c:783
#, c-format
msgid "Failed to read from file '%s': %s"
msgstr "讀取檔案‘%s’失敗:%s"
-#: ../glib/gfileutils.c:838 ../glib/gfileutils.c:925
+#: ../glib/gfileutils.c:834 ../glib/gfileutils.c:921
#, c-format
msgid "Failed to open file '%s': %s"
msgstr "開啟檔案「%s」失敗:%s"
-#: ../glib/gfileutils.c:855
+#: ../glib/gfileutils.c:851
#, c-format
msgid "Failed to get attributes of file '%s': fstat() failed: %s"
msgstr "獲取檔案‘%s’的屬性失敗:fstat() 失敗:%s"
-#: ../glib/gfileutils.c:889
+#: ../glib/gfileutils.c:885
#, c-format
msgid "Failed to open file '%s': fdopen() failed: %s"
msgstr "開啟檔案‘%s’失敗:fdopen() 失敗:%s"
-#: ../glib/gfileutils.c:997
+#: ../glib/gfileutils.c:993
#, c-format
msgid "Failed to rename file '%s' to '%s': g_rename() failed: %s"
msgstr "檔案名稱由‘%s’改為‘%s’失敗:g_rename() 失敗:%s"
-#: ../glib/gfileutils.c:1039 ../glib/gfileutils.c:1583
+#: ../glib/gfileutils.c:1047 ../glib/gfileutils.c:1554
#, c-format
msgid "Failed to create file '%s': %s"
msgstr "建立檔案‘%s’失敗:%s"
-#: ../glib/gfileutils.c:1053
-#, c-format
-msgid "Failed to open file '%s' for writing: fdopen() failed: %s"
-msgstr "開啟檔案‘%s’作寫入失敗:fdopen() 失敗:%s"
-
-#: ../glib/gfileutils.c:1078
+#: ../glib/gfileutils.c:1071
#, c-format
-msgid "Failed to write file '%s': fwrite() failed: %s"
-msgstr "寫入檔案‘%s’失敗:fwrite() 失敗:%s"
+msgid "Failed to write file '%s': write() failed: %s"
+msgstr "無法寫入檔案「%s」:write() 失敗:%s"
-#: ../glib/gfileutils.c:1097
-#, c-format
-msgid "Failed to write file '%s': fflush() failed: %s"
-msgstr "無法寫入檔案「%s」:fflush() 失敗:%s"
-
-#: ../glib/gfileutils.c:1141
+#: ../glib/gfileutils.c:1111
#, c-format
msgid "Failed to write file '%s': fsync() failed: %s"
msgstr "無法寫入檔案「%s」:fsync() 失敗:%s"
-#: ../glib/gfileutils.c:1165
-#, c-format
-msgid "Failed to close file '%s': fclose() failed: %s"
-msgstr "關閉檔案‘%s’失敗:fclose() 失敗:%s"
-
-#: ../glib/gfileutils.c:1286
+#: ../glib/gfileutils.c:1243
#, c-format
msgid "Existing file '%s' could not be removed: g_unlink() failed: %s"
msgstr "現存檔案‘%s’無法移除:g_unlink() 失敗:%s"
-#: ../glib/gfileutils.c:1546
+#: ../glib/gfileutils.c:1517
#, c-format
msgid "Template '%s' invalid, should not contain a '%s'"
msgstr "樣式‘%s’無效,不應含有‘%s’"
# (Abel) this is file template for mktemp/mkstemp
-#: ../glib/gfileutils.c:1559
+#: ../glib/gfileutils.c:1530
#, c-format
msgid "Template '%s' doesn't contain XXXXXX"
msgstr "檔案樣式‘%s’沒有包含 XXXXXX"
-#: ../glib/gfileutils.c:2087
+#: ../glib/gfileutils.c:2058
#, c-format
msgid "Failed to read the symbolic link '%s': %s"
msgstr "讀取符號連結‘%s’失敗:%s"
-#: ../glib/gfileutils.c:2108
+#: ../glib/gfileutils.c:2079
msgid "Symbolic links not supported"
msgstr "不支援符號連結"
-#: ../glib/giochannel.c:1415
+#: ../glib/giochannel.c:1418
#, c-format
msgid "Could not open converter from '%s' to '%s': %s"
msgstr "無法開啟將‘%s’轉換至‘%s’的轉換器:%s"
-#: ../glib/giochannel.c:1760
+#: ../glib/giochannel.c:1763
msgid "Can't do a raw read in g_io_channel_read_line_string"
msgstr "在 g_io_channel_read_line_string 中無法讀取原始資料"
-#: ../glib/giochannel.c:1807 ../glib/giochannel.c:2064
-#: ../glib/giochannel.c:2151
+#: ../glib/giochannel.c:1810 ../glib/giochannel.c:2068
+#: ../glib/giochannel.c:2155
msgid "Leftover unconverted data in read buffer"
msgstr "用來讀取資料的緩衝區中仍有未轉換的資料"
-#: ../glib/giochannel.c:1888 ../glib/giochannel.c:1965
+#: ../glib/giochannel.c:1891 ../glib/giochannel.c:1968
msgid "Channel terminates in a partial character"
msgstr "在字符未完整之前,輸入管道已經結束"
-#: ../glib/giochannel.c:1951
+#: ../glib/giochannel.c:1954
msgid "Can't do a raw read in g_io_channel_read_to_end"
msgstr "g_io_channel_read_to_end 中無法讀取原始資料"
-#: ../glib/gkeyfile.c:725
+#: ../glib/gkeyfile.c:722
msgid "Valid key file could not be found in search dirs"
msgstr "在資料目錄中找不到有效的設定鍵檔案"
-#: ../glib/gkeyfile.c:761
+#: ../glib/gkeyfile.c:758
msgid "Not a regular file"
msgstr "不是正規的檔案"
-#: ../glib/gkeyfile.c:1161
+#: ../glib/gkeyfile.c:1158
#, c-format
msgid ""
"Key file contains line '%s' which is not a key-value pair, group, or comment"
msgstr "設定鍵檔案中‘%s’行並非設定鍵值配對、羣組或註解"
-#: ../glib/gkeyfile.c:1218
+#: ../glib/gkeyfile.c:1215
#, c-format
msgid "Invalid group name: %s"
msgstr "無效的羣組名稱:%s"
-#: ../glib/gkeyfile.c:1240
+#: ../glib/gkeyfile.c:1237
msgid "Key file does not start with a group"
msgstr "設定鍵檔案並非以羣組開頭"
-#: ../glib/gkeyfile.c:1266
+#: ../glib/gkeyfile.c:1263
#, c-format
msgid "Invalid key name: %s"
msgstr "無效的設定鍵名稱:%s"
-#: ../glib/gkeyfile.c:1293
+#: ../glib/gkeyfile.c:1290
#, c-format
msgid "Key file contains unsupported encoding '%s'"
msgstr "設定鍵檔案包含不支援的編碼‘%s’"
-#: ../glib/gkeyfile.c:1536 ../glib/gkeyfile.c:1698 ../glib/gkeyfile.c:3076
-#: ../glib/gkeyfile.c:3142 ../glib/gkeyfile.c:3268 ../glib/gkeyfile.c:3401
-#: ../glib/gkeyfile.c:3543 ../glib/gkeyfile.c:3773 ../glib/gkeyfile.c:3840
+#: ../glib/gkeyfile.c:1533 ../glib/gkeyfile.c:1695 ../glib/gkeyfile.c:3073
+#: ../glib/gkeyfile.c:3139 ../glib/gkeyfile.c:3265 ../glib/gkeyfile.c:3398
+#: ../glib/gkeyfile.c:3540 ../glib/gkeyfile.c:3770 ../glib/gkeyfile.c:3837
#, c-format
msgid "Key file does not have group '%s'"
msgstr "設定鍵檔案沒有羣組‘%s’"
-#: ../glib/gkeyfile.c:1710
+#: ../glib/gkeyfile.c:1707
#, c-format
msgid "Key file does not have key '%s'"
msgstr "設定鍵檔案沒有設定鍵‘%s’"
-#: ../glib/gkeyfile.c:1817 ../glib/gkeyfile.c:1933
+#: ../glib/gkeyfile.c:1814 ../glib/gkeyfile.c:1930
#, c-format
msgid "Key file contains key '%s' with value '%s' which is not UTF-8"
msgstr "設定鍵檔案包含的設定鍵‘%s’(數值為‘%s’)並非 UTF-8"
-#: ../glib/gkeyfile.c:1837 ../glib/gkeyfile.c:1953 ../glib/gkeyfile.c:2322
+#: ../glib/gkeyfile.c:1834 ../glib/gkeyfile.c:1950 ../glib/gkeyfile.c:2319
#, c-format
msgid ""
"Key file contains key '%s' which has a value that cannot be interpreted."
msgstr "設定鍵檔案包含的設定鍵「%s」的數值無法解譯。"
-#: ../glib/gkeyfile.c:2539 ../glib/gkeyfile.c:2905
+#: ../glib/gkeyfile.c:2536 ../glib/gkeyfile.c:2902
#, c-format
msgid ""
"Key file contains key '%s' in group '%s' which has a value that cannot be "
"interpreted."
msgstr "設定鍵檔案包含的羣組「%2$s」中設定鍵「%1$s」數值無法解譯。"
-#: ../glib/gkeyfile.c:2617 ../glib/gkeyfile.c:2693
+#: ../glib/gkeyfile.c:2614 ../glib/gkeyfile.c:2690
#, c-format
msgid "Key '%s' in group '%s' has value '%s' where %s was expected"
msgstr "羣組「%2$s」中設定鍵「%1$s」包含數值「%3$s」,但預期為「%4$s」"
-#: ../glib/gkeyfile.c:3091 ../glib/gkeyfile.c:3283 ../glib/gkeyfile.c:3851
+#: ../glib/gkeyfile.c:3088 ../glib/gkeyfile.c:3280 ../glib/gkeyfile.c:3848
#, c-format
msgid "Key file does not have key '%s' in group '%s'"
msgstr "設定鍵檔案的羣組‘%2$s’中沒有設定鍵‘%1$s’"
-#: ../glib/gkeyfile.c:4083
+#: ../glib/gkeyfile.c:4080
msgid "Key file contains escape character at end of line"
msgstr "設定鍵檔案在行尾包含跳出字符"
-#: ../glib/gkeyfile.c:4105
+#: ../glib/gkeyfile.c:4102
#, c-format
msgid "Key file contains invalid escape sequence '%s'"
msgstr "設定鍵檔案含有不正確的「跳出字符」‘%s’"
-#: ../glib/gkeyfile.c:4247
+#: ../glib/gkeyfile.c:4244
#, c-format
msgid "Value '%s' cannot be interpreted as a number."
msgstr "數值‘%s’不能被解譯為數字。"
-#: ../glib/gkeyfile.c:4261
+#: ../glib/gkeyfile.c:4258
#, c-format
msgid "Integer value '%s' out of range"
msgstr "整數值‘%s’超出範圍"
-#: ../glib/gkeyfile.c:4294
+#: ../glib/gkeyfile.c:4291
#, c-format
msgid "Value '%s' cannot be interpreted as a float number."
msgstr "數值‘%s’不能被解譯為浮點數。"
-#: ../glib/gkeyfile.c:4318
+#: ../glib/gkeyfile.c:4315
#, c-format
msgid "Value '%s' cannot be interpreted as a boolean."
msgstr "數值‘%s’不能被解譯為邏輯值。"
-#: ../glib/gmappedfile.c:128
+#: ../glib/gmappedfile.c:130
#, c-format
msgid "Failed to get attributes of file '%s%s%s%s': fstat() failed: %s"
msgstr "獲取檔案 「%s%s%s%s」的屬性失敗:fstat() 失敗:%s"
-#: ../glib/gmappedfile.c:194
+#: ../glib/gmappedfile.c:196
#, c-format
msgid "Failed to map %s%s%s%s: mmap() failed: %s"
msgstr "對應檔案 %s%s%s%s 失敗:mmap() 失敗:%s"
-#: ../glib/gmappedfile.c:260
+#: ../glib/gmappedfile.c:262
#, c-format
msgid "Failed to open file '%s': open() failed: %s"
msgstr "開啟檔案‘%s’失敗:open() 失敗:%s"
-#: ../glib/gmarkup.c:356 ../glib/gmarkup.c:397
+#: ../glib/gmarkup.c:397 ../glib/gmarkup.c:439
#, c-format
msgid "Error on line %d char %d: "
msgstr "第 %d 列第 %d 個字發生錯誤:"
-#: ../glib/gmarkup.c:419 ../glib/gmarkup.c:502
+#: ../glib/gmarkup.c:461 ../glib/gmarkup.c:544
#, c-format
msgid "Invalid UTF-8 encoded text in name - not valid '%s'"
msgstr "名稱中無效的 UTF-8 編碼文字 - 不是合法的「%s」"
-#: ../glib/gmarkup.c:430
+#: ../glib/gmarkup.c:472
#, c-format
-msgid "'%s' is not a valid name "
+msgid "'%s' is not a valid name"
msgstr "「%s」不是一個有效的名稱"
-#: ../glib/gmarkup.c:446
+#: ../glib/gmarkup.c:488
#, c-format
-msgid "'%s' is not a valid name: '%c' "
-msgstr "「%s」不是一個有效的名稱:「%c」"
+msgid "'%s' is not a valid name: '%c'"
+msgstr "「%s」不是一個有效的名稱「%c」"
-#: ../glib/gmarkup.c:555
+#: ../glib/gmarkup.c:598
#, c-format
msgid "Error on line %d: %s"
msgstr "第 %d 列發生錯誤:%s"
-#: ../glib/gmarkup.c:639
+#: ../glib/gmarkup.c:682
#, c-format
msgid ""
"Failed to parse '%-.*s', which should have been a digit inside a character "
"reference (ê for example) - perhaps the digit is too large"
msgstr "無法解析‘%-.*s’,字符參引內應該含有數字(例如 ê)─ 可能是數字太大"
-#: ../glib/gmarkup.c:651
+#: ../glib/gmarkup.c:694
msgid ""
"Character reference did not end with a semicolon; most likely you used an "
"ampersand character without intending to start an entity - escape ampersand "
"as &"
msgstr "字符參引的結束部分不是分號;很可能你想使用 & 字符但未將它變為實體 ─ 請將 & 轉換為 &"
-#: ../glib/gmarkup.c:677
+#: ../glib/gmarkup.c:720
#, c-format
msgid "Character reference '%-.*s' does not encode a permitted character"
msgstr "字符參引‘%-.*s’無法表示任何能接受的字符"
-#: ../glib/gmarkup.c:715
+#: ../glib/gmarkup.c:758
msgid ""
"Empty entity '&;' seen; valid entities are: & " < > '"
msgstr "出現空白的實體‘&;’;可用的實體為:& " < > '"
-#: ../glib/gmarkup.c:723
+#: ../glib/gmarkup.c:766
#, c-format
msgid "Entity name '%-.*s' is not known"
msgstr "實體名稱 '%-.*s' 意義不明"
-#: ../glib/gmarkup.c:728
+#: ../glib/gmarkup.c:771
msgid ""
"Entity did not end with a semicolon; most likely you used an ampersand "
"character without intending to start an entity - escape ampersand as &"
msgstr "實體的結束部分不是分號;很可能你想使用 & 字符但未將它變為實體 ─ 請將 & 轉換為 &"
-#: ../glib/gmarkup.c:1076
+#: ../glib/gmarkup.c:1119
msgid "Document must begin with an element (e.g. <book>)"
msgstr "文件開始必須為一元素(例如 <book>)"
-#: ../glib/gmarkup.c:1116
+#: ../glib/gmarkup.c:1159
#, c-format
msgid ""
"'%s' is not a valid character following a '<' character; it may not begin an "
"element name"
msgstr "‘<’字符後的‘%s’不是有效的字符;這樣不可能是元素名稱的開始部份"
-#: ../glib/gmarkup.c:1184
+#: ../glib/gmarkup.c:1227
#, c-format
msgid ""
"Odd character '%s', expected a '>' character to end the empty-element tag "
"'%s'"
msgstr "字符「%s」只有一半,空元素標籤「%s」的結尾應該以‘>’字符結束"
-#: ../glib/gmarkup.c:1268
+#: ../glib/gmarkup.c:1311
#, c-format
msgid ""
"Odd character '%s', expected a '=' after attribute name '%s' of element '%s'"
msgstr "不尋常的字符‘%s’,屬性名稱‘%s’(屬於元素‘%s’)後應該是‘=’字符"
-#: ../glib/gmarkup.c:1309
+#: ../glib/gmarkup.c:1352
#, c-format
msgid ""
"Odd character '%s', expected a '>' or '/' character to end the start tag of "
"character in an attribute name"
msgstr "不尋常的字符‘%s’,元素‘%s’的開始標籤應該以‘>’或‘/’字符終結,也可以是屬性;或許你在屬性名稱中使用了無效的字符"
-#: ../glib/gmarkup.c:1353
+#: ../glib/gmarkup.c:1396
#, c-format
msgid ""
"Odd character '%s', expected an open quote mark after the equals sign when "
"giving value for attribute '%s' of element '%s'"
msgstr "不尋常的字符‘%s’,當指定屬性‘%s’的值(屬於元素‘%s’)時,等號後應該出現開引號"
-#: ../glib/gmarkup.c:1486
+#: ../glib/gmarkup.c:1529
#, c-format
msgid ""
"'%s' is not a valid character following the characters '</'; '%s' may not "
"begin an element name"
msgstr "‘</’字符後的‘%s’不是有效的字符;‘%s’不可能是元素名稱的開始部份"
-#: ../glib/gmarkup.c:1522
+#: ../glib/gmarkup.c:1565
#, c-format
msgid ""
"'%s' is not a valid character following the close element name '%s'; the "
"allowed character is '>'"
msgstr "字符‘%s’是無效的(位置在關閉元素‘%s’末端);允許的字符為「>」"
-#: ../glib/gmarkup.c:1533
+#: ../glib/gmarkup.c:1576
#, c-format
msgid "Element '%s' was closed, no element is currently open"
msgstr "元素‘%s’已關閉,沒有開啟中的元素"
-#: ../glib/gmarkup.c:1542
+#: ../glib/gmarkup.c:1585
#, c-format
msgid "Element '%s' was closed, but the currently open element is '%s'"
msgstr "元素‘%s’已關閉,但開啟中的元素是‘%s’"
-#: ../glib/gmarkup.c:1710
+#: ../glib/gmarkup.c:1753
msgid "Document was empty or contained only whitespace"
msgstr "文件完全空白或只含有空白字符"
-#: ../glib/gmarkup.c:1724
+#: ../glib/gmarkup.c:1767
msgid "Document ended unexpectedly just after an open angle bracket '<'"
msgstr "文件在尖角括號‘<’後突然終止"
-#: ../glib/gmarkup.c:1732 ../glib/gmarkup.c:1777
+#: ../glib/gmarkup.c:1775 ../glib/gmarkup.c:1820
#, c-format
msgid ""
"Document ended unexpectedly with elements still open - '%s' was the last "
"element opened"
msgstr "在仍然有開啟中的元素時,文件突然結束 ─‘%s’是最後一個開啟的元素"
-#: ../glib/gmarkup.c:1740
+#: ../glib/gmarkup.c:1783
#, c-format
msgid ""
"Document ended unexpectedly, expected to see a close angle bracket ending "
"the tag <%s/>"
msgstr "文件突然結束,本來應該出現用來關閉標籤 <%s/> 的尖角括號"
-#: ../glib/gmarkup.c:1746
+#: ../glib/gmarkup.c:1789
msgid "Document ended unexpectedly inside an element name"
msgstr "在元素的名稱內,文件突然結束"
-#: ../glib/gmarkup.c:1752
+#: ../glib/gmarkup.c:1795
msgid "Document ended unexpectedly inside an attribute name"
msgstr "在屬性名稱內,文件突然結束"
-#: ../glib/gmarkup.c:1757
+#: ../glib/gmarkup.c:1800
msgid "Document ended unexpectedly inside an element-opening tag."
msgstr "在元素的開啟標籤內,文件突然結束"
-#: ../glib/gmarkup.c:1763
+#: ../glib/gmarkup.c:1806
msgid ""
"Document ended unexpectedly after the equals sign following an attribute "
"name; no attribute value"
msgstr "在屬性名稱的等號後,文件突然結束;沒有屬性值"
-#: ../glib/gmarkup.c:1770
+#: ../glib/gmarkup.c:1813
msgid "Document ended unexpectedly while inside an attribute value"
msgstr "在屬性值內,文件突然結束"
-#: ../glib/gmarkup.c:1786
+#: ../glib/gmarkup.c:1829
#, c-format
msgid "Document ended unexpectedly inside the close tag for element '%s'"
msgstr "在元素‘%s’的關閉標籤內,文件突然結束"
-#: ../glib/gmarkup.c:1792
+#: ../glib/gmarkup.c:1835
msgid "Document ended unexpectedly inside a comment or processing instruction"
msgstr "在註解或處理指示內,文件突然結束"
-#: ../glib/goption.c:747
+#: ../glib/goption.c:754
msgid "Usage:"
msgstr "用法:"
-#: ../glib/goption.c:747
+#: ../glib/goption.c:754
msgid "[OPTION...]"
msgstr "[選項…]"
-#: ../glib/goption.c:853
+#: ../glib/goption.c:870
msgid "Help Options:"
msgstr "說明選項:"
-#: ../glib/goption.c:854
+#: ../glib/goption.c:871
msgid "Show help options"
msgstr "顯示說明的選項"
-#: ../glib/goption.c:860
+#: ../glib/goption.c:877
msgid "Show all help options"
msgstr "顯示所有的說明選項"
-#: ../glib/goption.c:922
+#: ../glib/goption.c:939
msgid "Application Options:"
msgstr "應用程式選項:"
-#: ../glib/goption.c:984 ../glib/goption.c:1054
+#: ../glib/goption.c:1003 ../glib/goption.c:1073
#, c-format
msgid "Cannot parse integer value '%s' for %s"
msgstr "無法給 %2$s 解析整數值‘%1$s’"
-#: ../glib/goption.c:994 ../glib/goption.c:1062
+#: ../glib/goption.c:1013 ../glib/goption.c:1081
#, c-format
msgid "Integer value '%s' for %s out of range"
msgstr "%2$s 的整數值‘%1$s’超出範圍"
-#: ../glib/goption.c:1019
+#: ../glib/goption.c:1038
#, c-format
msgid "Cannot parse double value '%s' for %s"
msgstr "無法給 %2$s 解析雙精度浮點數‘%1$s’"
-#: ../glib/goption.c:1027
+#: ../glib/goption.c:1046
#, c-format
msgid "Double value '%s' for %s out of range"
msgstr "%2$s 的雙精度浮點數‘%1$s’超出範圍"
-#: ../glib/goption.c:1290 ../glib/goption.c:1369
+#: ../glib/goption.c:1309 ../glib/goption.c:1388
#, c-format
msgid "Error parsing option %s"
msgstr "解析 %s 選項時發生錯誤"
-#: ../glib/goption.c:1400 ../glib/goption.c:1513
+#: ../glib/goption.c:1419 ../glib/goption.c:1532
#, c-format
msgid "Missing argument for %s"
msgstr "缺少 %s 的參數"
-#: ../glib/goption.c:1966
+#: ../glib/goption.c:1985
#, c-format
msgid "Unknown option %s"
msgstr "不明的選項 %s"
msgid "character value in \\u.... sequence is too large"
msgstr "\\u.... 序列中的字符值太大"
-#: ../glib/gregex.c:745 ../glib/gregex.c:1908
+#: ../glib/gregex.c:745 ../glib/gregex.c:1914
#, c-format
msgid "Error while matching regular expression %s: %s"
msgstr "比對正規表示式 %s 發生錯誤:%s"
-#: ../glib/gregex.c:1328
+#: ../glib/gregex.c:1311
msgid "PCRE library is compiled without UTF8 support"
msgstr "PCRE 程式庫並未編譯對 UTF8 的支援"
-#: ../glib/gregex.c:1332
+#: ../glib/gregex.c:1315
msgid "PCRE library is compiled without UTF8 properties support"
msgstr "PCRE 程式庫並未編譯對 UTF8 屬性的支援"
-#: ../glib/gregex.c:1340
+#: ../glib/gregex.c:1323
msgid "PCRE library is compiled with incompatible options"
msgstr "PCRE 程式庫並未編譯不兼容的選項"
-#: ../glib/gregex.c:1399
+#: ../glib/gregex.c:1382
#, c-format
msgid "Error while compiling regular expression %s at char %d: %s"
msgstr "編譯正規表示式 %s 時於第 %d 個字發生錯誤:%s"
-#: ../glib/gregex.c:1441
+#: ../glib/gregex.c:1424
#, c-format
msgid "Error while optimizing regular expression %s: %s"
msgstr "最佳化正規表示式 %s 時發生錯誤:%s"
-#: ../glib/gregex.c:2340
+#: ../glib/gregex.c:2346
msgid "hexadecimal digit or '}' expected"
msgstr "應為 16 進位數字或「}」"
-#: ../glib/gregex.c:2356
+#: ../glib/gregex.c:2362
msgid "hexadecimal digit expected"
msgstr "應為 16 進位數字"
-#: ../glib/gregex.c:2396
+#: ../glib/gregex.c:2402
msgid "missing '<' in symbolic reference"
msgstr "在符號參照中缺少「<」"
-#: ../glib/gregex.c:2405
+#: ../glib/gregex.c:2411
msgid "unfinished symbolic reference"
msgstr "未完成的符號參照"
-#: ../glib/gregex.c:2412
+#: ../glib/gregex.c:2418
msgid "zero-length symbolic reference"
msgstr "零-長度的符號參照"
-#: ../glib/gregex.c:2423
+#: ../glib/gregex.c:2429
msgid "digit expected"
msgstr "預期數字"
-#: ../glib/gregex.c:2441
+#: ../glib/gregex.c:2447
msgid "illegal symbolic reference"
msgstr "不合法的符號參照"
-#: ../glib/gregex.c:2503
+#: ../glib/gregex.c:2509
msgid "stray final '\\'"
msgstr "缺少最後的「\\」"
-#: ../glib/gregex.c:2507
+#: ../glib/gregex.c:2513
msgid "unknown escape sequence"
msgstr "不明的跳脫序列"
-#: ../glib/gregex.c:2517
+#: ../glib/gregex.c:2523
#, c-format
msgid "Error while parsing replacement text \"%s\" at char %lu: %s"
msgstr "當解析於字符 %2$lu 的取代文字「%1$s」時發生錯誤:%3$s"
-#: ../glib/gshell.c:91
+#: ../glib/gshell.c:88
msgid "Quoted text doesn't begin with a quotation mark"
msgstr "應該用引號括起來的文字不是以括號為開始"
-#: ../glib/gshell.c:181
+#: ../glib/gshell.c:178
msgid "Unmatched quotation mark in command line or other shell-quoted text"
msgstr "指令列或其它標為指令的字串內有不對稱的引號"
-#: ../glib/gshell.c:559
+#: ../glib/gshell.c:574
#, c-format
msgid "Text ended just after a '\\' character. (The text was '%s')"
msgstr "文字在‘\\’字符後就終止了。(文字為‘%s’)"
-#: ../glib/gshell.c:566
+#: ../glib/gshell.c:581
#, c-format
msgid "Text ended before matching quote was found for %c. (The text was '%s')"
msgstr "字串完結前仍沒有對應於 %c 的引號(字串為‘%s’)"
-#: ../glib/gshell.c:578
+#: ../glib/gshell.c:593
msgid "Text was empty (or contained only whitespace)"
msgstr "文字是空白的(或只含有空白字符)"
-#: ../glib/gspawn.c:216
+#: ../glib/gspawn.c:202
#, c-format
msgid "Failed to read data from child process (%s)"
msgstr "無法從副進程讀取資料 (%s)"
-#: ../glib/gspawn.c:359
+#: ../glib/gspawn.c:345
#, c-format
msgid "Unexpected error in select() reading data from a child process (%s)"
msgstr "當 select() 從子程序讀取資料時發生未預期的錯誤 (%s)"
-#: ../glib/gspawn.c:444
+#: ../glib/gspawn.c:430
#, c-format
msgid "Unexpected error in waitpid() (%s)"
msgstr "waitpid() 發生未預期的錯誤 (%s)"
-#: ../glib/gspawn.c:863 ../glib/gspawn-win32.c:1239
+#: ../glib/gspawn.c:849 ../glib/gspawn-win32.c:1233
#, c-format
msgid "Child process exited with code %ld"
msgstr "子程序以代碼 %ld 結束"
-#: ../glib/gspawn.c:871
+#: ../glib/gspawn.c:857
#, c-format
msgid "Child process killed by signal %ld"
msgstr "子程序被信號 %ld 中止"
-#: ../glib/gspawn.c:878
+#: ../glib/gspawn.c:864
#, c-format
msgid "Child process stopped by signal %ld"
msgstr "子程序被信號 %ld 停止"
-#: ../glib/gspawn.c:885
+#: ../glib/gspawn.c:871
#, c-format
msgid "Child process exited abnormally"
msgstr "子程序異常結束"
-#: ../glib/gspawn.c:1290 ../glib/gspawn-win32.c:344 ../glib/gspawn-win32.c:352
+#: ../glib/gspawn.c:1276 ../glib/gspawn-win32.c:339 ../glib/gspawn-win32.c:347
#, c-format
msgid "Failed to read from child pipe (%s)"
msgstr "無法從管道讀取資料 (%s)"
-#: ../glib/gspawn.c:1358
+#: ../glib/gspawn.c:1344
#, c-format
msgid "Failed to fork (%s)"
msgstr "無法衍生進程 (%s)"
-#: ../glib/gspawn.c:1506 ../glib/gspawn-win32.c:375
+#: ../glib/gspawn.c:1493 ../glib/gspawn-win32.c:370
#, c-format
msgid "Failed to change to directory '%s' (%s)"
msgstr "無法進入目錄‘%s’(%s)"
-#: ../glib/gspawn.c:1516
+#: ../glib/gspawn.c:1503
#, c-format
msgid "Failed to execute child process \"%s\" (%s)"
msgstr "無法執行副進程“%s”(%s)"
-#: ../glib/gspawn.c:1526
+#: ../glib/gspawn.c:1513
#, c-format
msgid "Failed to redirect output or input of child process (%s)"
msgstr "無法將副進程的輸出或輸入重新導向 (%s)"
-#: ../glib/gspawn.c:1535
+#: ../glib/gspawn.c:1522
#, c-format
msgid "Failed to fork child process (%s)"
msgstr "無法衍生副進程 (%s)"
-#: ../glib/gspawn.c:1543
+#: ../glib/gspawn.c:1530
#, c-format
msgid "Unknown error executing child process \"%s\""
msgstr "執行副進程“%s”時發生不明的錯誤"
-#: ../glib/gspawn.c:1567
+#: ../glib/gspawn.c:1554
#, c-format
msgid "Failed to read enough data from child pid pipe (%s)"
msgstr "無法從 child pid pipe 讀取足夠的資料 (%s)"
-#: ../glib/gspawn.c:1640 ../glib/gspawn-win32.c:305
+#: ../glib/gspawn.c:1627 ../glib/gspawn-win32.c:300
#, c-format
msgid "Failed to create pipe for communicating with child process (%s)"
msgstr "無法建立管道來和副進程溝通 (%s)"
-#: ../glib/gspawn-win32.c:288
+#: ../glib/gspawn-win32.c:283
msgid "Failed to read data from child process"
msgstr "無法從副進程讀取資料"
-#: ../glib/gspawn-win32.c:381 ../glib/gspawn-win32.c:500
+#: ../glib/gspawn-win32.c:376 ../glib/gspawn-win32.c:495
#, c-format
msgid "Failed to execute child process (%s)"
msgstr "無法執行副進程 (%s)"
-#: ../glib/gspawn-win32.c:450
+#: ../glib/gspawn-win32.c:445
#, c-format
msgid "Invalid program name: %s"
msgstr "程式名稱無效:%s"
-#: ../glib/gspawn-win32.c:460 ../glib/gspawn-win32.c:728
-#: ../glib/gspawn-win32.c:1303
+#: ../glib/gspawn-win32.c:455 ../glib/gspawn-win32.c:722
+#: ../glib/gspawn-win32.c:1297
#, c-format
msgid "Invalid string in argument vector at %d: %s"
msgstr "第 %d 個引數中含無效的字串:%s"
-#: ../glib/gspawn-win32.c:471 ../glib/gspawn-win32.c:743
-#: ../glib/gspawn-win32.c:1336
+#: ../glib/gspawn-win32.c:466 ../glib/gspawn-win32.c:737
+#: ../glib/gspawn-win32.c:1330
#, c-format
msgid "Invalid string in environment: %s"
msgstr "環境變數中的字串無效:%s"
-#: ../glib/gspawn-win32.c:724 ../glib/gspawn-win32.c:1284
+#: ../glib/gspawn-win32.c:718 ../glib/gspawn-win32.c:1278
#, c-format
msgid "Invalid working directory: %s"
msgstr "無效的工作目錄:%s"
-#: ../glib/gspawn-win32.c:789
+#: ../glib/gspawn-win32.c:783
#, c-format
msgid "Failed to execute helper program (%s)"
msgstr "無法執行協助程式 (%s)"
-#: ../glib/gspawn-win32.c:1003
+#: ../glib/gspawn-win32.c:997
msgid ""
"Unexpected error in g_io_channel_win32_poll() reading data from a child "
"process"
msgstr "當 g_io_channel_win32_poll() 從副進程讀取資料時發生無法預計的錯誤"
-#: ../glib/gutf8.c:915
+#: ../glib/gutf8.c:907
msgid "Character out of range for UTF-8"
msgstr "字符不在 UTF-8 範圍之內"
-#: ../glib/gutf8.c:1015 ../glib/gutf8.c:1024 ../glib/gutf8.c:1154
-#: ../glib/gutf8.c:1163 ../glib/gutf8.c:1302 ../glib/gutf8.c:1398
+#: ../glib/gutf8.c:1007 ../glib/gutf8.c:1016 ../glib/gutf8.c:1146
+#: ../glib/gutf8.c:1155 ../glib/gutf8.c:1294 ../glib/gutf8.c:1390
msgid "Invalid sequence in conversion input"
msgstr "轉換輸入資料時出現無效的字符次序"
-#: ../glib/gutf8.c:1313 ../glib/gutf8.c:1409
+#: ../glib/gutf8.c:1305 ../glib/gutf8.c:1401
msgid "Character out of range for UTF-16"
msgstr "字符不在 UTF-16 範圍之內"
-#: ../glib/gutils.c:2184 ../glib/gutils.c:2211 ../glib/gutils.c:2315
+#: ../glib/gutils.c:2183 ../glib/gutils.c:2210 ../glib/gutils.c:2314
#, c-format
msgid "%u byte"
msgid_plural "%u bytes"
msgstr[0] "%u 位元組"
-#: ../glib/gutils.c:2190
+#: ../glib/gutils.c:2189
#, c-format
msgid "%.1f KiB"
msgstr "%.1f KiB"
-#: ../glib/gutils.c:2192
+#: ../glib/gutils.c:2191
#, c-format
msgid "%.1f MiB"
msgstr "%.1f MiB"
-#: ../glib/gutils.c:2195
+#: ../glib/gutils.c:2194
#, c-format
msgid "%.1f GiB"
msgstr "%.1f GiB"
-#: ../glib/gutils.c:2198
+#: ../glib/gutils.c:2197
#, c-format
msgid "%.1f TiB"
msgstr "%.1f TiB"
-#: ../glib/gutils.c:2201
+#: ../glib/gutils.c:2200
#, c-format
msgid "%.1f PiB"
msgstr "%.1f PiB"
-#: ../glib/gutils.c:2204
+#: ../glib/gutils.c:2203
#, c-format
msgid "%.1f EiB"
msgstr "%.1f EiB"
-#: ../glib/gutils.c:2217
+#: ../glib/gutils.c:2216
#, c-format
msgid "%.1f kB"
msgstr "%.1f kB"
-#: ../glib/gutils.c:2220 ../glib/gutils.c:2328
+#: ../glib/gutils.c:2219 ../glib/gutils.c:2332
#, c-format
msgid "%.1f MB"
msgstr "%.1f MB"
-#: ../glib/gutils.c:2223 ../glib/gutils.c:2333
+#: ../glib/gutils.c:2222 ../glib/gutils.c:2337
#, c-format
msgid "%.1f GB"
msgstr "%.1f GB"
-#: ../glib/gutils.c:2225 ../glib/gutils.c:2338
+#: ../glib/gutils.c:2224 ../glib/gutils.c:2342
#, c-format
msgid "%.1f TB"
msgstr "%.1f TB"
-#: ../glib/gutils.c:2228 ../glib/gutils.c:2343
+#: ../glib/gutils.c:2227 ../glib/gutils.c:2347
#, c-format
msgid "%.1f PB"
msgstr "%.1f PB"
-#: ../glib/gutils.c:2231 ../glib/gutils.c:2348
+#: ../glib/gutils.c:2230 ../glib/gutils.c:2352
#, c-format
msgid "%.1f EB"
msgstr "%.1f EB"
#. Translators: the %s in "%s bytes" will always be replaced by a number.
-#: ../glib/gutils.c:2268
+#: ../glib/gutils.c:2267
#, c-format
msgid "%s byte"
msgid_plural "%s bytes"
msgstr[0] "%s 位元組"
-#: ../glib/gutils.c:2323
+#. Translators: this is from the deprecated function g_format_size_for_display() which uses 'KB' to
+#. * mean 1024 bytes. I am aware that 'KB' is not correct, but it has been preserved for reasons of
+#. * compatibility. Users will not see this string unless a program is using this deprecated function.
+#. * Please translate as literally as possible.
+#.
+#: ../glib/gutils.c:2327
#, c-format
msgid "%.1f KB"
msgstr "%.1f KB"
-#~ msgid "Abnormal program termination spawning command line `%s': %s"
+#~ msgid "Unable to get pending error: %s"
+#~ msgstr "無法取得未處理的錯誤:%s"
+
+#~ msgid "Failed to open file '%s' for writing: fdopen() failed: %s"
+#~ msgstr "開啟檔案‘%s’作寫入失敗:fdopen() 失敗:%s"
+
+#~ msgid "Failed to write file '%s': fflush() failed: %s"
+#~ msgstr "無法寫入檔案「%s」:fflush() 失敗:%s"
+
+#~ msgid "Failed to close file '%s': fclose() failed: %s"
+#~ msgstr "關閉檔案‘%s’失敗:fclose() 失敗:%s"
+
+#~ msgid "Incomplete data received for '%s'"
+#~ msgstr "收到「%s」的不完整資料"
+
+#~ msgid ""
+#~ "Unexpected option length while checking if SO_PASSCRED is enabled for "
+#~ "socket. Expected %d bytes, got %d"
+#~ msgstr ""
+#~ "檢查 SO_PASSCRED 在 socket 是否啟用時有未預期的選項長度。預期為 %d 位元"
+#~ "組,得到 %d"
+
+#~ msgid "Abnormal program termination spawning command line '%s': %s"
#~ msgstr "不正常的程式中止產生命令列「%s」:%s"
-#~ msgid "Command line `%s' exited with non-zero exit status %d: %s"
+#~ msgid "Command line '%s' exited with non-zero exit status %d: %s"
#~ msgstr "命令列「%s」以非零結束狀態 %d 結束:%s"
#~ msgid "No service record for '%s'"
#~ msgid "pm"
#~ msgstr "下午"
-#~ msgid "Type of return value is incorrect, got `%s', expected `%s'"
+#~ msgid "Type of return value is incorrect, got '%s', expected '%s'"
#~ msgstr "回傳值的類型是不正確的,得到「%s」,預期為「%s」"
#~ msgid ""
#~ msgstr ""
#~ "正在嘗試設定類型 %2$s 的屬性 %1$s 但是根據預期的介面這個類型應該是 %3$s"
-#~ msgid "No such schema `%s' specified in override file `%s'"
+#~ msgid "No such schema '%s' specified in override file '%s'"
#~ msgstr "在覆蓋檔案「%2$s」沒有指定這個 schema「%1$s」"
#~ msgid ""
#~ " KEY 設定鍵的名稱\n"
#~ " VALUE 設定鍵的數值,為序列化的 GVariant\n"
-#~ msgid "Key %s is not writable\n"
-#~ msgstr "設定鍵 %s 無法寫入\n"
-
#~ msgid ""
#~ "Monitor KEY for changes and print the changed values.\n"
#~ "Monitoring will continue until the process is terminated."
#~ msgid "Error writing first 16 bytes of message to socket: "
#~ msgstr "當寫入訊息的頭 16 位元組到 socket 時發生錯誤:"
-#~ msgid "The nonce-file `%s' was %lu bytes. Expected 16 bytes."
+#~ msgid "The nonce-file '%s' was %lu bytes. Expected 16 bytes."
#~ msgstr "nonce-file「%s」有 %lu 位元組。預期應為 16 位元組。"
#, fuzzy