{
/*
* In this function error propagation can lead to bad results:
- * - det can have an unbound error (if b*b-a*c is very small),
+ * - discr can have an unbound error (if b*b-a*c is very small),
* potentially making it the opposite sign of what it should have been
* (thus clearing a pixel that would have been colored or vice-versa)
- * or propagating the error to sqrtdet;
- * if det has the wrong sign or b is very small, this can lead to bad
+ * or propagating the error to sqrtdiscr;
+ * if discr has the wrong sign or b is very small, this can lead to bad
* results
*
* - the algorithm used to compute the solutions of the quadratic
*
* - the above problems are worse if a is small (as inva becomes bigger)
*/
- double det;
+ double discr;
if (a == 0)
{
- return _pixman_gradient_walker_pixel (walker,
- pixman_fixed_1 / 2 * c / b);
+ double t;
+
+ if (b == 0)
+ return 0;
+
+ t = pixman_fixed_1 / 2 * c / b;
+ if (repeat == PIXMAN_REPEAT_NONE)
+ {
+ if (0 <= t && t <= pixman_fixed_1)
+ return _pixman_gradient_walker_pixel (walker, t);
+ }
+ else
+ {
+ if (t * dr > mindr)
+ return _pixman_gradient_walker_pixel (walker, t);
+ }
+
+ return 0;
}
- det = fdot (b, a, 0, b, -c, 0);
- if (det >= 0)
+ discr = fdot (b, a, 0, b, -c, 0);
+ if (discr >= 0)
{
- double sqrtdet, t0, t1;
+ double sqrtdiscr, t0, t1;
- sqrtdet = sqrt (det);
- t0 = (b + sqrtdet) * inva;
- t1 = (b - sqrtdet) * inva;
+ sqrtdiscr = sqrt (discr);
+ t0 = (b + sqrtdiscr) * inva;
+ t1 = (b - sqrtdiscr) * inva;
+ /*
+ * The root that must be used is the biggest one that belongs
+ * to the valid range ([0,1] for PIXMAN_REPEAT_NONE, any
+ * solution that results in a positive radius otherwise).
+ *
+ * If a > 0, t0 is the biggest solution, so if it is valid, it
+ * is the correct result.
+ *
+ * If a < 0, only one of the solutions can be valid, so the
+ * order in which they are tested is not important.
+ */
if (repeat == PIXMAN_REPEAT_NONE)
{
if (0 <= t0 && t0 <= pixman_fixed_1)
return 0;
}
-static void
-radial_gradient_get_scanline_32 (pixman_image_t *image,
- int x,
- int y,
- int width,
- uint32_t * buffer,
- const uint32_t *mask)
+static uint32_t *
+radial_get_scanline_narrow (pixman_iter_t *iter, const uint32_t *mask)
{
/*
* Implementation of radial gradients following the PDF specification.
* See section 8.7.4.5.4 Type 3 (Radial) Shadings of the PDF Reference
* Manual (PDF 32000-1:2008 at the time of this writing).
- *
+ *
* In the radial gradient problem we are given two circles (c₁,r₁) and
* (c₂,r₂) that define the gradient itself.
*
*
* The graphical result is the same as drawing the valid (radius > 0)
* circles with increasing t in [-inf, +inf] (or in [0,1] if the gradient
- * is not repeated) using SOURCE operatior composition.
+ * is not repeated) using SOURCE operator composition.
*
* It looks like a cone pointing towards the viewer if the ending circle
* is smaller than the starting one, a cone pointing inside the page if
* in, compute the t values for that point, solving for t in:
*
* length((1-t)·c₁ + t·(c₂) - p) = (1-t)·r₁ + t·r₂
- *
+ *
* Let's rewrite it in a simpler way, by defining some auxiliary
* variables:
*
* cd = c₂ - c₁
* pd = p - c₁
* dr = r₂ - r₁
- * lenght(t·cd - pd) = r₁ + t·dr
+ * length(t·cd - pd) = r₁ + t·dr
*
* which actually means
*
* B = pdx·cdx + pdy·cdy + r₁·dr
* C = pdx² + pdy² - r₁²
* At² - 2Bt + C = 0
- *
+ *
* The solutions (unless the equation degenerates because of A = 0) are:
*
* t = (B ± ⎷(B² - A·C)) / A
* <=> for every p, the radiuses associated with the two t solutions
* have opposite sign
*/
+ pixman_image_t *image = iter->image;
+ int x = iter->x;
+ int y = iter->y;
+ int width = iter->width;
+ uint32_t *buffer = iter->buffer;
gradient_t *gradient = (gradient_t *)image;
radial_gradient_t *radial = (radial_gradient_t *)image;
if (image->common.transform)
{
if (!pixman_transform_point_3d (image->common.transform, &v))
- return;
-
+ return iter->buffer;
+
unit.vector[0] = image->common.transform->matrix[0][0];
unit.vector[1] = image->common.transform->matrix[1][0];
unit.vector[2] = image->common.transform->matrix[2][0];
v.vector[2] += unit.vector[2];
}
}
+
+ iter->y++;
+ return iter->buffer;
}
-static void
-radial_gradient_property_changed (pixman_image_t *image)
+static uint32_t *
+radial_get_scanline_wide (pixman_iter_t *iter, const uint32_t *mask)
{
- image->common.get_scanline_32 = radial_gradient_get_scanline_32;
- image->common.get_scanline_64 = _pixman_image_get_scanline_generic_64;
+ uint32_t *buffer = radial_get_scanline_narrow (iter, NULL);
+
+ pixman_expand ((uint64_t *)buffer, buffer, PIXMAN_a8r8g8b8, iter->width);
+
+ return buffer;
+}
+
+void
+_pixman_radial_gradient_iter_init (pixman_image_t *image, pixman_iter_t *iter)
+{
+ if (iter->iter_flags & ITER_NARROW)
+ iter->get_scanline = radial_get_scanline_narrow;
+ else
+ iter->get_scanline = radial_get_scanline_wide;
}
PIXMAN_EXPORT pixman_image_t *
radial->mindr = -1. * pixman_fixed_1 * radial->c1.radius;
- image->common.property_changed = radial_gradient_property_changed;
-
return image;
}
-