-$! $Id$
-$! BUILD_VMS.COM
+$! BUILD_VMS.COM
$!
$! I've taken the original build_vms.com, supplied by Nico Baggus, if
$! memory serves me correctly, and made some modifications.
$!
-$! SSL support is based on logicals, or lack thereof. If SSL$INCLUDE
-$! is defined, then it assumed that hp's SSL product has been installed.
-$! If OPENSSL is defined, but SSL$INCLUDE isn't, then the OpenSSL defined
-$! via the defines.com procedure will be used. If neither logical is
-$! defined, then SSL support will not be compiled/linked in.
+$! SSL support is controlled by logical names. If SSL$INCLUDE is
+$! defined, then it is assumed that HP's SSL product has been installed.
+$! If OPENSSL is defined, but SSL$INCLUDE is not, then OpenSSL will be
+$! used. If neither logical name is defined, then SSL support will not
+$! be compiled/linked in. Command-line options NOHPSSL and NOSSL can be
+$! specified to override the automatic SSL selection.
$!
-$! If CURL_BUILD_NOSSL is defined to anything, then no SSL support will
-$! be built in. This way you can build without SSL support on systems
-$! that have it without the "automatic" build/link "features".
+$! Command-line Options:
$!
-$! If CURL_BUILD_NOHPSSL is defined to anything, it will override the
-$! SSL$INCLUDE check. This way you can build against OpenSSL, even if
-$! you have hp SSL installed.
+$! CLEAN Delete product files for this host architecture. (No
+$! build done.)
+$! CLEAN_ALL Delete product files for all host architectures. (No
+$! build done.)
$!
-$! Parameter(s):
+$! 64 Compile with 64-bit pointers.
+$! Note, you must match the pointer size that the OpenSSL
+$! shared image expects.
+$! Currently curl is not building properly with 64 bit pointers
+$! on VMS because it is trying to cast pointers to 32 bit
+$! integers and some OpenVMS library routines called by curl
+$! do not yet support 64 bit pointers.
+$! CCQUAL=x Add "x" to the C compiler qualifiers.
+$! Default qualifiers are:
+$! /standard=relaxed
+$! /names=(as_is, shortened)
+$! /repository=[.'arch']
+$! /nested_include_directory=none
+$! /define=(_LARGEFILE=1,_USE_STD_STAT=1) (non-vax)
+$! /float=ieee/ieee_mode=denorm_results (non-vax)
+$! DEBUG Compile debug and nooptimize
+$! Alpha/IA64 always compiles /debug.
+$! Always link a debug image.
+$! NOIEEE Do not use IEEE floating point. (Alpha/I64)
+$! VAX must always use DFLOAT
+$! NOLARGE Disable large-file support if large file support available.
+$! (Non-VAX, VMS >= V7.2.)
+$! NOLDAP Disable LDAP support if LDAP is available.
+$! NOKERBEROS Disable Kerberos support if Kerberos is available.
+$! LIST Create C compiler listings and linker maps.
+$! /list/show=(expan,includ)/machine
+$! FULLLIST Full detailed listing.
+$! /list/show=(all, nomessages)/machine
+$! NOHPSSL Don't use HP SSL, even if available.
+$! Note, you must match the pointer size that the OpenSSL
+$! shared image expects. This procedure will select the
+$! correct HP OpenSSL image.
+$! NOSSL Don't use any SSL, even if available.
+$! OSSLOLB Use OpenSSL object libraries (.OLB), even if shared
+$! images (.EXE) are available.
+$! NOZLIB Don't use GNV$ZLIB shared image even if available.
+$! REALCLEAN Delete product files for all host architectures. (No
+$! build done.) Alias for CLEAN_ALL
$!
-$! P1 - LISTING will create .lis files during the C compile
-$! DEBUG will compile and link with debug
+$! DCL Symbols:
+$!
+$! CURL_CCDEFS="c_macro_1=value1 [, c_macro_2=value2 [...]]"
+$! Compile with these additional C macros defined.
$!
$! Revisions:
$!
$! 2-DEC-2003, MSK, the "original" version.
$! It works for me. Your mileage may vary.
$! 13-JAN-2004, MSK, moved this procedure to the [.packages.vms] directory
-$! and updated it to do hardware dependant builds.
+$! and updated it to do hardware dependent builds.
$! 29-JAN-2004, MSK, moved logical defines into defines.com
$! 6-FEB-2004, MSK, put in various SSL support bits
$! 9-MAR-2004, MSK, the config-vms.h* files are now copied to the lib and
-$! src directories as config.h.
-$! 15-MAR-2004, MSK, All of the curlmsg*.* files have also been moved to
-$! this build directory. They will be copied to the src
-$! directory before build. The .msg file will be compiled
-$! to get the .obj for messages, but the .h and .sdl files
-$! are not automatically created since they partly rely on
+$! src directories as curl_config.h.
+$! 15-MAR-2004, MSK, All of the curlmsg*.* files have also been moved to
+$! this build directory. They will be copied to the src
+$! directory before build. The .msg file will be compiled
+$! to get the .obj for messages, but the .h and .sdl files
+$! are not automatically created since they partly rely on
$! the freeware SDL tool.
$! 8-FEB-2005, MSK, merged the two config-vms.h* files into one that uses
$! USE_SSLEAY to define if the target has SSL support built
$! in. Changed the cc/define parameter accordingly.
$! 11-FEB-2005, MSK, If [--.LIB]AMIGAOS.C and NWLIB.C are there, rename them
$! 23-MAR-2005, MSK, relocated cc_qual define so that DEBUG option would work
+$! 25-APR-2007, STL, allow compilation in 64-bit mode.
+$! 13-DEC-2009. SMS, Changed to skip unwanted source files without
+$! renaming the original files.
+$! Eliminated needless, persistent logical names.
+$! Added CURL_CCDEFS DCL symbol for user-specified C
+$! macro definitions.
+$! Added CLEAN and CLEAN_ALL options.
+$! Added CCQUAL option for user-specified C compiler
+$! qualifiers.
+$! Added IEEE option for IEEE floating point (Alpha).
+$! Added LARGE option for large-file support.
+$! Added OSSLOLB option, and support for OpenSSL
+$! shared images.
+$! Changed to put listing and map files into lisdir:.
+$! Changed to avoid case confusion on ODS5 disks.
+$! Added more default dev:[dir] save+restore.
+$! Moved remaining "defines.com" code (back) into
+$! here, eliminating the hard-coded OpenSSL nonsense.
+$! Changed to use F$GETSYI("ARCH_NAME") (or
+$! equivalent) to name architecture-specific product
+$! file destination directory, and to create the
+$! directory if needed (obviating inclusion of these
+$! directories and dummy files in the distribution
+$! kit).
+$! Changed the "compile" subroutine to break the CC
+$! command across multiple lines to avoid DCL
+$! line-too-long problems.
+$! Changed "vo_c" messages to show the CC qualifiers
+$! once, not with every compile command.
+$! 01-Jan-2013 J. Malmberg
+$! VMS build procedures need to be able to work with
+$! the default set to a search list, with created or
+$! modified files only in the first member of the search
+$! list.
+$! Whitespace change to be more compatible with current
+$! practices.
+$! One pass option parsing instead of loop.
+$! GNV ZLIB shared image support.
+$! KERBEROS support where available.
+$! LDAP default to on where available
+$! LARGEFILE default to on where available
+$! IEEE float default to on where available.
+$! Generate the curl_config.h file from system inspection.
+$! Linker finds ldap with out option file.
+$! 13-Mar-2013, Tom Grace
+$! Added missing slash in cc_full_list.
+$! Removed unwanted extra quotes inside symbol tool_main
+$! for non-VAX architectures that triggered link failure.
+$! Replaced curl_sys_inc with sys_inc.
+$! 19-Mar-2013, John Malmberg
+$! symbol tool_main needs to be quoted when parse style is
+$! set to exended in versions of VMS greater than 7.3-1.
+$! Remove curlbuild.h generation as it should be pre-built
+$! in the curl release or daily tarball.
+$! 12-Jul-2013, John Malmberg
+$! Adjust to find and use ZLIB from the Jean-Francois
+$! Pieronne shared image and newer GNV ZLIB kit that
+$! is upward compatible with Jean-Francois's kit.
+$! Remove tabs from file.
+$! Fixed DCL formatting as follows:
+$! * Labels have no space after leading $.
+$! * 1 space after $ for first level.
+$! * 3 spaces after $ for second level. Line start + 4.
+$! * 7 spaces after $ for third level. Line start + 8.
+$! * Each level after that indents 4 characters.
+$! * then/else/endif same indentation as if statement.
+$! 17-Nov-2014, Michael Steve
+$! Modified build to handle new location of the VTLS lib
+$! source within zip archive. Not a pretty fix.
+$!
+$!===========================================================================
$!
+$!
+$! Save the original default dev:[dir], and arrange for its restoration
+$! at exit.
+$!------------------------------------------------------------------------
+$ curl = ""
+$ orig_def = f$environment("DEFAULT")
+$ on error then goto Common_Exit
$ on control_y then goto Common_Exit
-$ ctrl_y = 1556
-$ origdir = f$environment("DEFAULT")
-$ proc = f$environment("PROCEDURE")
-$ thisdir = f$parse( proc,,,"DEVICE") + f$parse( proc,,,"DIRECTORY")
+$!
+$ ctrl_y = 1556
+$ proc = f$environment("PROCEDURE")
+$ proc_fid = f$file_attributes(proc, "FID")
+$ proc_dev = f$parse(proc, , , "DEVICE")
+$ proc_dir = f$parse(proc, , , "DIRECTORY")
+$ proc_name = f$parse(proc, , , "NAME")
+$ proc_type = f$parse(proc, , , "TYPE")
+$ proc_dev_dir = proc_dev + proc_dir
+$!
+$! Have to manually parse the device for a search list.
+$! Can not use the f$parse() as it will return the first name
+$! in the search list.
+$!
+$ orig_def_dev = f$element(0, ":", orig_def) + ":"
+$ if orig_def_dev .eqs. "::" then orig_def_dev = "sys$disk:"
+$ test_proc = orig_def_dev + proc_dir + proc_name + proc_type
+$!
+$! If we can find this file using the default directory
+$! then we know that we should use the original device from the
+$! default directory which could be a search list.
+$!
+$ test_proc_fid = f$file_attributes(test_proc, "FID")
+$!
+$ if (test_proc_fid .eq. proc_fid)
+$ then
+$ proc_dev_dir = orig_def_dev + proc_dir
+$ endif
+$!
$!
$! Verbose output message stuff. Define symbol to "write sys$output" or "!".
$! vo_c - verbose output for compile
$! vo_l - link
$! vo_o - object check
$!
-$ vo_c = "write sys$output"
-$ vo_l = "write sys$output"
-$ vo_o = "!"
+$ vo_c := "write sys$output"
+$ vo_l := "write sys$output"
+$ vo_o := "!"
+$!
+$! Determine the main distribution directory ("[--]") in an
+$! ODS5-tolerant (case-insensitive) way. (We do assume that the only
+$! "]" or ">" is the one at the end.)
$!
-$ defines = thisdir + "defines.com"
-$ if f$trnlnm( "curl_defines_done") .eqs. ""
-$ then
-$ if f$search( defines) .eqs. ""
+$! Some non-US VMS installations report ">" for the directory delimiter
+$! so do not assume that it is "]".
+$!
+$ orig_def_len = f$length(orig_def)
+$ delim = f$extract(orig_def_len - 1, 1, orig_def)
+$!
+$ set default 'proc_dev_dir'
+$ set default [--]
+$ base_dev_dir = f$environment("default")
+$ top_dev_dir = base_dev_dir - delim
+$!
+$!
+$!
+$! Define the architecture-specific product file destination directory
+$! name(s).
+$!
+$ parse_style = "TRADITIONAL"
+$ if (f$getsyi("HW_MODEL") .lt. 1024)
+$ then
+$ arch_name = "VAX"
+$ else
+$ arch_name = ""
+$ arch_name = arch_name + f$edit(f$getsyi("ARCH_NAME"), "UPCASE")
+$ if (arch_name .eqs. "") then arch_name = "UNK"
+$!
+$! Extended parsing option starts with VMS 7.3-1.
+$! There is no 7.4, so that simplifies the parse a bit.
+$!
+$ node_swvers = f$getsyi("node_swvers")
+$ version_patch = f$extract(1, f$length(node_swvers), node_swvers)
+$ maj_ver = f$element(0, ".", version_patch)
+$ min_ver_patch = f$element(1, ".", version_patch)
+$ min_ver = f$element(0, "-", min_ver_patch)
+$ patch = f$element(1, "-", min_ver_patch)
+$ if patch .eqs. "-" then patch = ""
+$ parse_x = 0
+$ if maj_ver .ges. "8"
$ then
-$ write sys$output "%CURL-F-DEFFNF, cannot find defines.com procedure"
-$ exit %X18290 ! FNF
+$ parse_x = 1
$ else
-$ @'defines'
+$ if maj_ver .eqs. "7" .and. min_ver .ges. "3" .and. patch .nes. ""
+$ then
+$ parse_x = 1
+$ endif
+$ endif
+$ if parse_x
+$ then
+$ parse_style = f$getjpi("", "parse_style_perm")
$ endif
$ endif
-$ set def 'thisdir'
$!
-$ hpssl = 0
+$ exedir = proc_dev_dir - delim + ".''arch_name'" + delim
+$ lisdir = exedir
+$ objdir = exedir
+$!
+$! When building on a search list, need to do a create to make sure that
+$! the output directory exists, since the clean procedure tries to delete
+$! it.
+$ create/dir 'exedir'/prot=o:rwed
+$!
+$! Interpret command-line options.
+$!
+$ hpssl = 0
+$ ldap = 1
+$ list = 0
+$ full_list = 0
+$ nohpssl = 0
+$ nossl = 0
$ openssl = 0
-$ cc_qual = "/define=HAVE_CONFIG_H=1/OBJ=OBJDIR:"
+$ osslolb = 0
+$ nozlib = 0
+$ nokerberos = 0
+$ cc_names = "/names=(shortened, as_is)/repository='exedir'
+$ cc_defs = "HAVE_CONFIG_H=1"
+$ cc_list = "/list='objdir'/show=(expan, includ)/machine
+$ cc_full_list = "/list='objdir'/show=(all, nomessages)/machine
$ link_qual = ""
-$ if f$trnlnm( "CURL_BUILD_NOSSL") .eqs. ""
+$ if arch_name .eqs. "VAX"
$ then
-$ if f$trnlnm( "OPENSSL") .nes. ""
-$ then
-$ openssl = 1
-$ cc_qual = "/define=(HAVE_CONFIG_H=1,USE_SSLEAY=1)/OBJ=OBJDIR:"
-$ if ( f$trnlnm( "SSL$INCLUDE") .nes. "") .and. -
- ( f$trnlnm( "CURL_BUILD_NOHPSSL") .eqs. "")
-$ then hpssl = 1
+$ cc_debug = "/nodebug/optimize"
+$ !cc_defs = cc_defs + ""
+$ cc_float = ""
+$ cc_large = ""
+$ else
+$ cc_debug = "/debug/optimize"
+$ cc_defs = cc_defs + ",_USE_STD_STAT"
+$ cc_float = "/float=ieee/ieee_mode=denorm_results"
+$ cc_large = ",_LARGEFILE"
+$ endif
+$ cc_qual1 = ""
+$ cc_qual2 = ""
+$ if (f$type(CURL_CCDEFS) .nes. "")
+$ then
+$ CURL_CCDEFS = f$edit(CURL_CCDEFS, "TRIM")
+$ cc_defs = cc_defs + ", " + CURL_CCDEFS
+$ endif
+$ msg_qual = "/object = ''objdir'"
+$ ssl_opt = ""
+$!
+$! Allow arguments to be grouped together with comma or separated by spaces
+$! Do no know if we will need more than 8.
+$ args = "," + p1 + "," + p2 + "," + p3 + "," + p4 + ","
+$ args = args + p5 + "," + p6 + "," + p7 + "," + p8 + ","
+$!
+$! Provide lower case version to simplify parsing.
+$ args_lower = f$edit(args, "LOWERCASE,COLLAPSE")
+$!
+$ args_len = f$length(args)
+$ args_lower_len = f$length(args_lower)
+$!
+$ clean = 0
+$ if f$locate(",clean,", args_lower) .lt. args_lower_len
+$ then
+$ clean = 1
+$ endif
+$ clean_all = 0
+$ if f$locate(",clean_all,", args_lower) .lt. args_lower_len
+$ then
+$ clean = 1
+$ clean_all = 1
+$ endif
+$ if f$locate(",realclean,", args_lower) .lt. args_lower_len
+$ then
+$ clean = 1
+$ clean_all = 1
+$ endif
+$!
+$ if clean .ne. 0
+$ then
+$ prods = "''exedir'*.*;*"
+$ if (f$search(prods) .nes. "") then delete /log 'prods'
+$ prods = proc_dev_dir + arch_name + ".DIR;1"
+$ if (f$search(prods) .nes. "") then set prot=o:rwed 'prods'
+$ if (f$search(prods) .nes. "") then delete /log 'prods'
+$ file = "[]config_vms.h"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[]config.h"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[]curl-config."
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[]libcurl.pc"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[.lib.cxx_repository]cxx$demangler_db."
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[.src.cxx_repository]cxx$demangler_db."
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[.lib]config_vms.h"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]curl_crtl_init"
+$ if f$search("''file'.lis") .nes. "" then delete/log 'file'.lis;*
+$ if f$search("''file'.obj") .nes. "" then delete/log 'file'.obj;*
+$ file = "[...]gnv$curlmsg"
+$ if f$search("''file'.lis") .nes. "" then delete/log 'file'.lis;*
+$ if f$search("''file'.obj") .nes. "" then delete/log 'file'.obj;*
+$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;*
+$ file = "[...]curlmsg"
+$ if f$search("''file'.lis") .nes. "" then delete/log 'file'.lis;*
+$ if f$search("''file'.obj") .nes. "" then delete/log 'file'.obj;*
+$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;*
+$ file = "[...]report_openssl_version"
+$ if f$search("''file'.lis") .nes. "" then delete/log 'file'.lis;*
+$ if f$search("''file'.obj") .nes. "" then delete/log 'file'.obj;*
+$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;*
+$ file = "[...]hp_ssl_release_info.txt"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]gnv_libcurl_xfer.mar_exact"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]gnv_libcurl_xfer"
+$ if f$search("''file'.lis") .nes. "" then delete/log 'file'.lis;*
+$ if f$search("''file'.obj") .nes. "" then delete/log 'file'.obj;*
+$ if f$search("''file'.opt") .nes. "" then delete/log 'file'.opt;*
+$ file = "[...]curl-*_original_src.bck"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]curl_d-*_original_src.bck"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]curl-*_vms_src.bck"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]curl_d-*_vms_src.bck"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]curl-*.release_notes"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]curl_d-*.release_notes"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]*curl*.pcsi$desc"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]*curl_d*.pcsi$desc"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]*curl*.pcsi$text"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]*curl_d*.pcsi$text"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$!
+$ if clean_all .eq. 0 then goto Common_Exit
+$ endif
+$!
+$!
+$ if clean_all .ne. 0
+$ then
+$ file = "[...]gnv$libcurl"
+$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;*
+$ if f$search("''file'.map") .nes. "" then delete/log 'file'.map;*
+$ if f$search("''file'.dsf") .nes. "" then delete/log 'file'.dsf;*
+$ file = "[.src]curl"
+$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;*
+$ if f$search("''file'.map") .nes. "" then delete/log 'file'.map;*
+$ if f$search("''file'.dsf") .nes. "" then delete/log 'file'.dsf;*
+$ prods = proc_dev_dir - delim + ".ALPHA" + delim + "*.*;*"
+$ if (f$search(prods) .nes. "") then delete /log 'prods'
+$ prods = proc_dev_dir + "ALPHA" + ".DIR;1"
+$ if (f$search(prods) .nes. "") then set prot=o:rwed 'prods'
+$ if (f$search(prods) .nes. "") then delete /log 'prods'
+$ prods = proc_dev_dir - delim + ".IA64" + delim + "*.*;*"
+$ if (f$search(prods) .nes. "") then delete /log 'prods'
+$ prods = proc_dev_dir + "IA64" + ".DIR;1"
+$ if (f$search(prods) .nes. "") then set prot=o:rwed 'prods'
+$ if (f$search(prods) .nes. "") then delete /log 'prods'
+$ prods = proc_dev_dir - delim + ".VAX" + delim + "*.*;*"
+$ if (f$search(prods) .nes. "") then delete /log 'prods'
+$ prods = proc_dev_dir + "VAX"+ ".DIR;1"
+$ if (f$search(prods) .nes. "") then set prot=o:rwed 'prods'
+$ if (f$search(prods) .nes. "") then delete /log 'prods'
+$ file = "[...]macro32_exactcase"
+$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;*
+$ if f$search("''file'.jnl") .nes. "" then delete/log 'file'.jnl;*
+$ goto Common_Exit
+$ endif
+$!
+$ build_64 = 0
+$ if f$locate(",64,", args_lower) .lt. args_lower_len
+$ then
+$ cc_qual1 = cc_qual1 + " /POINTER = 64"
+$ build_64 = 1
+$ endif
+$!
+$ args_loc = f$locate(",ccqual=", args_lower)
+$ if args_loc .lt. args_lower_len
+$ then
+$ arg = f$extract(args_loc + 1, args_lower_len, args_lower)
+$ arg_val = f$element(0, ",", arg)
+$ cc_qual2 = f$element(1, "=", arg_val);
+$ endif
+$!
+$! On Alpha/IA64 no size penalty for compiling /debug/optimize
+$! by default.
+$ if f$locate(",debug,", args_lower) .lt. args_lower_len
+$ then
+$ cc_debug = "/debug/nooptimize"
+$ endif
+$!
+$! We normally want IEEE float if it is available. Programs that are
+$! calling libcurl will typically prefer IEEE behavior, unless on the
+$! VAX where we have no choice.
+$!
+$ if f$locate(",noieee,", args_lower) .lt. args_lower_len
+$ then
+$ cc_float = ""
+$ endif
+$!
+$! Normally we want large file if it is available.
+$ if f$locate(",nolarge,", args_lower) .lt. args_lower_len
+$ then
+$ write sys$output "Handling of large files disabled."
+$ cc_large = ""
+$ endif
+$ if cc_large .nes. ""
+$ then
+$ cc_defs = cc_defs + cc_large
+$ endif
+$!
+$ if f$locate(",noldap,", args_lower) .lt. args_lower_len
+$ then
+$ ldap = 0
+$ endif
+$!
+$ if f$locate(",list,", args_lower) .lt. args_lower_len
+$ then
+$ list = 1
+$ endif
+$ if f$locate(",fulllist,", args_lower) .lt. args_lower_len
+$ then
+$ list = 1
+$ full_list = 1
+$ endif
+$!
+$ if f$locate(",nohpssl,", args_lower) .lt. args_lower_len
+$ then
+$ nohpssl = 1
+$ endif
+$!
+$ if f$locate(",nossl,", args_lower) .lt. args_lower_len
+$ then
+$ nossl = 1
+$ endif
+$!
+$ if f$locate(",osslolb,", args_lower) .lt. args_lower_len
+$ then
+$ osslolb = 1
+$ endif
+$!
+$ if f$locate(",nozlib,", args_lower) .lt. args_lower_len
+$ then
+$ nozlib = 1
+$ endif
+$!
+$ if f$locate(",nokerberos,", args_lower) .lt. args_lower_len
+$ then
+$ nokerberos = 1
+$ endif
+$!
+$!
+$! CC /LIST, LINK /MAP, and MESSAGE /LIST are defaults in batch mode,
+$! so be explicit when they're not desired.
+$!
+$
+$ if list .eq. 0
+$ then
+$ cc_qual1 = cc_qual1 + "/nolist"
+$ msg_qual = msg_qual + "/nolist"
+$ else
+$ msg_qual = msg_qual + "/list='objdir'"
+$ if (full_list .ne. 0)
+$ then
+$ cc_qual1 = cc_qual1 + cc_full_list
+$ else
+$ cc_qual1 = cc_qual1 + cc_list
+$ endif
+$ endif
+$ cc_qual1 = cc_qual1 + cc_names + cc_float + cc_debug
+$!
+$! Create product directory, if needed.
+$!
+$ if (f$search(proc_dev_dir + arch_name + ".DIR;1") .eqs. "")
+$ then
+$ create /directory 'exedir'
+$ endif
+$!
+$! Detect available (but not prohibited) SSL software.
+$!
+$ libsslshr_line = ""
+$ libcryptoshr_line = ""
+$ if (.not. nossl)
+$ then
+$ if (f$trnlnm("OPENSSL") .nes. "")
+$ then
+$! cc_defs = cc_defs + ", USE_SSLEAY=1"
+$ if ((f$trnlnm("SSL$INCLUDE") .nes. "") .and. (.not. nohpssl))
+$ then
+$! Use HP SSL.
+$ hpssl = 1
+$!
+$! Older SSL only has lib*_shr32 images
+$!-----------------------------------------------
+$ libsslshr = "sys$share:ssl$libssl_shr"
+$ if (f$search("''libsslshr'.exe") .eqs. "") .or. (.not. build_64)
+$ then
+$ libsslshr = libsslshr + "32"
+$ endif
+$ libcryptoshr = "sys$share:ssl$libcrypto_shr"
+$ if (f$search("''libcryptoshr'.exe") .eqs. "") .or. (.not. build_64)
+$ then
+$ libcryptoshr = libcryptoshr + "32"
+$ endif
+$ libsslshr_line = "''libsslshr'.exe/share"
+$ libcryptoshr_line = "''libcryptoshr'.exe/share"
+$ else
+$! Use OpenSSL. Assume object libraries, unless shared images
+$! are found (and not prohibited).
+$! TODO: We do not know how to automatically choose based on the
+$! pointer size.
+$!
+$ openssl = 1
+$ libsslshr_line = "ssllib:libssl.olb/lib"
+$ libcryptoshr_line = "ssllib:libcrypto.olb/lib"
+$ ssl_opt = ", ssllib:libssl.olb /library" + -
+ ", ssllib:libcrypto.olb /library"
+$ if (osslolb .eq. 0)
+$ then
+ if ((f$search("ssllib:ssl_libcrypto.exe") .nes. "") .and. -
+ (f$search("ssllib:ssl_libssl.exe") .nes. ""))
+$ then
+$! OpenSSL shared images with "SSL_xxx.EXE names.
+$ openssl = 2
+$ libsslshr_line = "ssllib:ssl_libssl_shr.exe/share"
+$ libcryptoshr_line = "ssllib:ssl_libcrypto_shr.exe/share"
+$ else
+$ if ((f$search("ssllib:libcrypto.exe") .nes. "") .and. -
+ (f$search("ssllib:libssl.exe") .nes. ""))
+$ then
+$! OpenSSL shared images with "xxx.EXE names.
+$ openssl = 3
+$ libsslshr_line = "ssllib:libssl_shr.exe/share"
+$ libcryptoshr_line = "ssllib:libcrypto_shr.exe/share"
+$ endif
+$ endif
+$ endif
$ endif
-$ endif
+$ endif
+$ endif
+$!
+$! LDAP.
+$!
+$ if f$search("SYS$SHARE:LDAP$SHR.EXE") .eqs. ""
+$ then
+$ ldap = 0
+$ endif
+$ if (ldap .eq. 0)
+$ then
+$! cc_defs = cc_defs + ", CURL_DISABLE_LDAP=1"
+$ else
+$ 'vo_c' "%CURL-I-BLDHPLDAP, building with HP LDAP support"
+$ endif
+$!
+$! KERBEROS
+$ gssrtlshr_line = ""
+$ try_shr = "sys$share:gss$rtl"
+$ if f$search("''try_shr'.exe") .eqs. ""
+$ then
+$ nokerberos = 1
+$ endif
+$ curl_sys_krbinc = ""
+$ if nokerberos .eq. 0
+$ then
+$ 'vo_c' "%CURL-I-BLDHPKERBEROS, building with HP KERBEROS support"
+$ curl_sys_krbinc = "sys$sysroot:[kerberos.include]"
+$ gssrtlshr_line = "''try_shr'/share"
+$ endif
+$!
+$!
+$! LIBZ
+$ libzshr_line = ""
+$ try_shr = "gnv$libzshr"
+$ if build_64
+$ then
+$! First look for 64 bit
+$ if f$search("''try_shr'64") .eqs. ""
+$ then
+$! Second look for the J.F. Pieronne 64 bit shared image
+$ try_shr = "LIBZ_SHR64"
+$ if f$search(try_shr) .eqs. "" then nozlib = 1
+$ endif
+$ else
+$! First look for 32 bit
+$ if f$search("''try_shr'32") .eqs. ""
+$ then
+$! Second look for old 32 bit image
+$ if f$search(try_shr) .eqs. ""
+$ then
+$! Third look for the J.F. Pieronne 32 bit shared image
+$ try_shr = "LIBZ_SHR32"
+$ if f$search(try_shr) .eqs. "" then nozlib = 1
+$ endif
+$ endif
$ endif
-$ if p1 .eqs. "LISTING" then cc_qual = cc_qual + "/LIST/MACHINE"
-$ if p1 .eqs. "DEBUG"
-$ then
-$ cc_qual = cc_qual + "/LIST/MACHINE/DEBUG/NOOPT"
-$ link_qual = "/DEBUG"
+$ if f$search(try_shr) .eqs. ""
+$ then
+$ nozlib = 1
$ endif
-$ msg_qual = "/OBJ=OBJDIR:"
+$ curl_sys_zlibinc = ""
+$ if nozlib .eq. 0
+$ then
+$ libzshr_line = "''try_shr'/share"
+$ if f$locate("LIBZ", try_shr) .eq. 0
+$ then
+$ 'vo_c' "%CURL-I-BLDJFPLIBZ, building with JFP LIBZ support"
+$ curl_sys_zlibinc = "LIBZ:"
+$ else
+$ 'vo_c' "%CURL-I-BLDGNVLIBZ, building with GNV LIBZ support"
+$ curl_sys_zlibinc = "GNV$ZLIB_INCLUDE:"
+$ endif
+$ endif
+$!
+$! Form CC qualifiers.
+$!
+$ cc_defs = "/define = (''cc_defs')"
+$ cc_qual2 = cc_qual2 + " /object = ''objdir'"
+$ cc_qual2 = cc_qual2 + "/nested_include_directory=none"
$!
-$! Put the right main config file in the two source directories for the build.
+$ 'vo_c' "CC opts:", -
+ " ''cc_defs'", -
+ " ''cc_qual1'", -
+ " ''cc_qual2'"
$!
-$ if ( openssl .eq. 1) .or. ( hpssl .eq. 1)
+$! Inform the victim of our plans.
+$!
+$ if (hpssl)
$ then
-$ 'vo_c' "%CURL-I-BLDSSL, building with SSL support"
+$ 'vo_c' "%CURL-I-BLDHPSSL, building with HP SSL support"
$ else
-$ 'vo_c' "%CURL-I-BLDNOSSL, building without SSL support"
+$ if (openssl .ne. 0)
+$ then
+$ if (openssl .eq. 1)
+$ then
+$ 'vo_c' -
+ "%CURL-I-BLDOSSL_OLB, building with OpenSSL (object library) support"
+$ else
+$ 'vo_c' -
+ "%CURL-I-BLDOSSL_EXE, building with OpenSSL (shared image) support"
+$ endif
+$ else
+$ 'vo_c' "%CURL-I-BLDNOSSL, building with NO SSL support"
+$ endif
$ endif
-$ config_h = "CONFIG-VMS.H"
$!
-$! Only do the copy if the source and destination files are different.
+$! Announce destination and SSL directories.
+$!
+$ 'vo_c' " OBJDIR = ''objdir'"
+$ 'vo_c' " EXEDIR = ''exedir'"
+$!
+$ if (openssl .ne. 0)
+$ then
+$ ssllib = f$trnlnm("ssllib")
+$ if (ssllib .eqs. "")
+$ then
+$ ssllib = "(undefined)"
+$ endif
+$ 'vo_c' " SSLLIB = ''ssllib'"
$!
-$ call MoveIfDiff 'config_h' "[--.LIB]CONFIG.H"
-$ call MoveIfDiff 'config_h' "[--.SRC]CONFIG.H"
-$! call MoveIfDiff "SETUP.H" "[--.LIB]"
-$! call MoveIfDiff "SETUP.H" "[--.SRC]"
-$ call MoveIfDiff "CURLMSG.H" "[--.SRC]"
-$ call MoveIfDiff "CURLMSG.MSG" "[--.SRC]"
-$ call MoveIfDiff "CURLMSG.SDL" "[--.SRC]"
-$ call MoveIfDiff "CURLMSG_VMS.H" "[--.SRC]"
+$! TODO: Why are we translating the logical name?
+$! The logical aname used to find the shared image should just be used
+$! as translating it could result in the wrong location at run time.
+$ if (openssl .eq. 1)
+$ then
+$ ossl_lib1 = f$trnlnm("ssllib")+ "LIBSSL.OLB"
+$ ossl_lib2 = f$trnlnm("ssllib")+ "LIBCRYPTO.OLB"
+$ msg = "object libraries"
+$ else
+$ if (openssl .eq. 2)
+$ then
+$ ossl_lib1 = f$trnlnm("ssllib")+ "SSL_LIBSSL.EXE"
+$ ossl_lib2 = f$trnlnm("ssllib")+ "SSL_LIBCRYPTO.EXE"
+$ else
+$ ossl_lib1 = f$trnlnm("ssllib")+ "LIBSSL.EXE"
+$ ossl_lib2 = f$trnlnm("ssllib")+ "LIBCRYPTO.EXE"
+$ endif
+$ msg = "shared images"
+$ endif
+$ if ((f$search(ossl_lib1) .eqs. "") .or. -
+ (f$search(ossl_lib2) .eqs. ""))
+$ then
+$ write sys$output "Can't find OpenSSL ''msg':"
+$ write sys$output " ''ossl_lib1'"
+$ write sys$output " ''ossl_lib2'"
+$ goto Common_Exit
+$ endif
+$ endif
$!
-$! The [--.LIB]amigaos.c and nwlib.c files aren't needed for the VMS build.
-$! If they are there, rename them so the brute force build works right.
+$! Define the "curl" (process) logical name for "#include <curl/xxx.h>".
$!
-$ if f$search( "[--.lib]amigaos.c") .nes. ""
+$ curl = f$trnlnm("curl", "LNM$PROCESS")
+$ if (curl .nes. "")
$ then
-$ rename [--.lib]amigaos.c .c_not_used
+$ write sys$output ""
+$ write sys$output -
+ "Process logical name ""curl"" is already defined, but this procedure"
+$ write sys$output -
+ "would override that definition. Use a command like"
+$ write sys$output -
+ " deassign /process curl"
+$ write sys$output -
+ "to cancel that logical name definition, and then and re-run this procedure."
+$ write sys$output ""
+$ goto Common_Exit
$ endif
-$ if f$search( "[--.lib]nwlib.c") .nes. ""
+$ curl_logical = top_dev_dir + ".include.curl" + delim
+$ curl_sys_inc2 = curl_logical
+$ curl_sys_inc1 = top_dev_dir + ".include" + delim
+$! define curl 'top_dev_dir'.include.curl'delim'
+$!
+$! Generate config file into the product directory.
+$!
+$! call MoveIfDiff [.lib]config-vms.h 'objdir'curl_config.h
+$!
+$ conf_params = ""
+$ if nossl .ne. 0 then conf_params = conf_params + ",nossl"
+$ if nohpssl .ne. 0 then conf_params = conf_params + ",nohpssl,"
+$ if ldap .eq. 0 then conf_params = conf_params + ",noldap,"
+$ if nozlib .ne. 0 then conf_params = conf_params + ",nozlib,"
+$ if nokerberos .ne. 0 then conf_params = conf_params + ",nokerberos"
+$ conf_params = conf_params - ","
+$!
+$!
+$ new_conf = f$search("''objdir'curl_config.h")
+$ if new_conf .eqs. ""
$ then
-$ rename [--.lib]nwlib.c .c_not_used
+$! set ver
+$ write sys$output "Generating curl custom config_vms.h"
+$ @'proc_dev_dir'generate_config_vms_h_curl.com ''conf_params'
+$!
+$ write sys$output "Generating curl_config.h"
+$ conf_in = f$search("[.lib]curl_config*.*in")
+$ if conf_in .eqs. ""
+$ then
+$ write sys$output "Can not find [.lib]curl_config*.*in file!"
+$ goto common_exit
+$ endif
+$ @'proc_dev_dir'config_h.com 'conf_in'
+$ copy config.h 'objdir'curl_config.h
+$ delete config.h;
+$! set nover
$ endif
+$!
+$!
$ on control_y then goto Common_Exit
$!
-$ call build "[--.lib]" "*.c" "objdir:curllib.olb"
+$ set default 'proc_dev_dir'
+$ sys_inc = "''curl_sys_inc1', ''curl_sys_inc2', ''curl_logical'"
+$ if curl_sys_krbinc .nes. ""
+$ then
+$ sys_inc = sys_inc + ",''curl_sys_krbinc'"
+$ endif
+$ if curl_sys_zlibinc .nes. ""
+$ then
+$ sys_inc = sys_inc + ",''curl_sys_zlibinc'"
+$ endif
+$! Build LIB
+$ cc_include = "/include=([-.lib],[-.lib.vtls],[-.packages.vms]"
+$ cc_include = cc_include + ",[-.packages.vms.''arch_name'])"
+$ call build "[--.lib]" "*.c" "''objdir'CURLLIB.OLB" "amigaos, nwlib, nwos"
$ if ($status .eq. ctrl_y) then goto Common_Exit
-$ call build "[--.src]" "*.c" "objdir:curlsrc.olb"
+$! Build VTLS
+$ cc_include = "/include=([--.lib.vtls],[--.lib],[--.src]"
+$ cc_include = cc_include + ",[--.packages.vms],[--.packages.vms.''arch_name'])"
+$ call build "[--.lib.vtls]" "*.c" "''objdir'CURLLIB.OLB" "amigaos, nwlib, nwos"
+$! Build SRC
+$ cc_include = "/include=([-.src],[-.lib],[-.lib.vtls]"
+$ cc_include = cc_include + ",[-.packages.vms],[-.packages.vms.''arch_name'])"
+$ call build "[--.src]" "*.c" "''objdir'CURLSRC.OLB"
$ if ($status .eq. ctrl_y) then goto Common_Exit
-$ call build "[--.src]" "*.msg" "objdir:curlsrc.olb"
+$! Build MSG
+$ call build "[]" "*.msg" "''objdir'CURLSRC.OLB"
$ if ($status .eq. ctrl_y) then goto Common_Exit
-$ if ( openssl .eq. 1) .and. ( hpssl .eq. 0)
+$!
+$!
+$ if (openssl .ne. 0)
$ then
-$ 'vo_l' "%CURL-I-LINK_OSSL, linking with OpenSSL"
-$ link 'link_qual'/exe=exedir:curl.exe -
- objdir:curlsrc/lib/include=(main,curlmsg),-
- objdir:curllib/lib, libssl/lib, libcrypto/lib
+$ if (openssl .eq. 1)
+$ then
+$ 'vo_l' "%CURL-I-LINK_OSSL, linking with OpenSSL (object library)"
+$ else
+$ 'vo_l' "%CURL-I-LINK_HPSSL, linking with OpenSSL (shared image)"
+$ endif
+$ else
+$ if (hpssl)
+$ then
+$ 'vo_l' "%CURL-I-LINK_HPSSL, linking with HP SSL"
+$ else
+$ 'vo_l' "%CURL-I-LINK_NOSSL, linking with NO SSL support"
+$ endif
$ endif
-$ if ( openssl .eq. 1) .and. ( hpssl .eq. 1)
+$!
+$!
+$! GNV helper files for building the test curl binary.
+$!-----------------------------------------------
+$ create 'exedir'gnv$curl.opt
+$ open/append opt 'exedir'gnv$curl.opt
+$ if libzshr_line .nes. "" then write opt libzshr_line
+$ if gssrtlshr_line .nes. "" then write opt gssrtlshr_line
+$ if libcryptoshr_line .nes. "" then write opt libcryptoshr_line
+$ if libsslshr_line .nes. "" then write opt libsslshr_line
+$ close opt
+$!
+$!
+$! Create the libcurl
+$!------------------------------------------------------
+$ create 'exedir'gnv_libcurl_linker.opt
+$ open/append opt 'exedir'gnv_libcurl_linker.opt
+$ if libzshr_line .nes. "" then write opt libzshr_line
+$ if gssrtlshr_line .nes. "" then write opt gssrtlshr_line
+$ if libcryptoshr_line .nes. "" then write opt libcryptoshr_line
+$ if libsslshr_line .nes. "" then write opt libsslshr_line
+$ close opt
+$!
+$!
+$! If we are not on VAX, then we want the debug symbol table in
+$! a separate file.
+$! VAX needs the tool_main unquoted in uppercase,
+$! Alpha and IA64 need tool_main quoted in exact case when parse style is
+$! extended.
+$ link_dsf1 = ""
+$ link_dsf2 = ""
+$ tool_main = "tool_main"
+$ if arch_name .nes. "VAX"
$ then
-$ 'vo_l' "%CURL-I-LINK_HPSSL, linking with hp SSL option"
-$ optfile = "[]hpssl_" + f$getsyi("ARCH_NAME") + ".opt/opt"
-$ link 'link_qual'/exe=exedir:curl.exe -
- objdir:curlsrc/lib/include=(main,curlmsg),-
- objdir:curllib/lib, 'optfile'
+$ if parse_style .eqs. "EXTENDED"
+$ then
+$ tool_main = """tool_main"""
+$ endif
+$ link_dsf1 = "/dsf=" + exedir + "CURL.DSF"
+$ link_dsf2 = "/dsf=" + exedir + "CURL_DEBUG.DSF"
$ endif
-$ if ( openssl .eq. 0) .and. ( hpssl .eq. 0)
+$ if (list .eq. 0)
$ then
-$ 'vo_l' "%CURL-I-LINK_NOSSL, linking without SSL support"
-$ link 'link_qual'/exe=exedir:curl.exe -
- objdir:curlsrc/lib/include=(main,curlmsg),-
- objdir:curllib/lib
+$ link_map1 = "/nomap"
+$ link_map2 = "/nomap"
+$ else
+$ link_map1 = "/map=" + exedir + "CURL.MAP"
+$ link_map2 = "/map=" + exedir + "CURL_DEBUG.MAP"
$ endif
$!
+$!
+$! Make a normal image.
+$ set ver
+$ link 'link_map1' 'link_dsf1' /executable = 'exedir'CURL.EXE -
+ 'objdir'curlsrc.olb /library /include = ('tool_main', curlmsg), -
+ 'objdir'curllib.olb /library, -
+ 'exedir'gnv$curl.opt/opt
+$!
+$! Also make a debug copy.
+$ link/debug 'link_map2' 'link_dsf2' /executable = 'exedir'CURL_DEBUG.EXE -
+ 'objdir'curlsrc.olb /library /include = ('tool_main', curlmsg), -
+ 'objdir'curllib.olb /library, -
+ 'exedir'gnv$curl.opt/opt
+$ set nover
+$!
$ goto Common_Exit
$!
-$! Subroutine to build everything with a filetype passed in via P2 in
-$! the directory passed in via P1 and put it in the object library named
-$! via P3
+$! Subroutine to build everything with a filetype passed in via P2 in
+$! the directory passed in via P1 and put it in the object library named
+$! via P3. Exclude items in P4.
$!
$build: subroutine
-$ on control_y then goto EndLoop ! SS$_CONTROLY
-$! set noon
+$ build_def = f$environment("default")
+$ on control_y then goto EndLoop ! SS$_CONTROLY
+$ sts = 1 ! SS$_NORMAL.
+$! set noon
$ set default 'p1'
-$ search = p2
+$ search = "sys$disk:" + p2
$ reset = f$search("reset")
$ if f$search( p3) .eqs. ""
$ then
-$ LIB/CREATE/OBJECT 'p3'
+$ librarian /create /object 'p3'
$ endif
-$ reset = f$search("reset",1)
+$ reject_list__ = "," + f$edit(p4, "COLLAPSE, UPCASE") + ","
+$ reject_list___len = f$length(reject_list__)
+$ reset = f$search( "reset", 1)
$Loop:
-$ file = f$search(search,1)
+$ file = f$search( search, 1)
$ if file .eqs. "" then goto EndLoop
-$ objfile = f$parse("objdir:.OBJ;",file)
-$ obj = f$search( objfile, 2)
-$ if (obj .nes. "")
-$ then
-$ if (f$cvtime(f$file(file,"rdt")) .gts. f$cvtime(f$file(obj,"rdt")))
-$ then
-$ call compile 'file'
-$ if .not. $status then return $status
-$ lib/object 'p3' 'objfile'
-$ else
-$ 'vo_o' "%CURL-I-OBJUTD, ", objfile, " is up to date"
-$ endif
-$ else
-$ 'vo_o' "%CURL-I-OBJDNE, ", file, " does not exist"
-$ call compile 'file'
-$ if .not. $status then return $status
-$ lib/object 'p3' 'objfile'
-$ endif
+$! Skip a name if it's in the P4 exclusion list.
+$ if (p4 .nes. "")
+$ then
+$ name__ = "," + -
+ f$edit(f$parse(file, , , "NAME", "SYNTAX_ONLY"), "UPCASE") + -
+ ","
+$ if (f$locate(name__, reject_list__) .lt. reject_list___len)
+$ then
+$ goto Loop
+$ endif
+$ endif
+$ objfile = f$parse("''objdir'.OBJ;", file)
+$ obj = f$search(objfile, 2)
+$ if (obj .nes. "")
+$ then
+$ if (f$cvtime(f$file(file,"rdt")) .gts. f$cvtime(f$file(obj,"rdt")))
+$ then
+$ call compile 'file'
+$ sts = $status
+$ if .not. sts
+$ then
+$ goto EndLoop
+$ endif
+$ librarian /object 'p3' 'objfile'
+$ else
+$ 'vo_o' "%CURL-I-OBJUTD, ", objfile, " is up to date"
+$ endif
+$ else
+$ 'vo_o' "%CURL-I-OBJDNE, ", file, " does not exist"
+$ call compile 'file'
+$ sts = $status
+$ if .not. sts
+$ then
+$ goto EndLoop
+$ endif
+$ librarian /object 'p3' 'objfile'
+$ endif
$ goto Loop
$EndLoop:
-$ !purge
-$ set def 'origdir'
-$ endsubroutine ! Build
+$!!! purge
+$ set default 'build_def'
+$ exit 'sts'
+$ endsubroutine ! Build
$!
-$! Based on the file TYPE, do the right compile command.
+$! Based on the file TYPE, do the right compile command.
$! Only C and MSG supported.
$!
$compile: subroutine
$ on control_y then return ctrl_y ! SS$_CONTROLY
$! set noon
$ file = p1
-$ qual = p2+p3+p4+p5+p6+p7+p8
-$ typ = f$parse(file,,,"TYPE") - "."
-$ cmd_c = "CC "+cc_qual
-$ cmd_msg = "MESSAGE "+msg_qual
-$ x = cmd_'typ'
-$ 'vo_c' x," ",file
-$ 'x' 'file'
-$ ENDSUBROUTINE ! Compile
+$ qual = p2+ p3+ p4+ p5+ p6+ p7+ p8
+$ typ = f$edit(f$parse(file, , , "TYPE"), "UPCASE") - "."
+$ if (typ .eqs. "C")
+$ then
+$ 'vo_c' "CC (opts) ", file
+$ define/user curl 'curl_logical'
+$ if curl_sys_krbinc .nes. "" then define/user gssapi 'curl_sys_krbinc'
+$ define/user decc$system_include 'sys_inc'
+$ CC 'cc_defs' -
+ 'cc_qual1' -
+ 'cc_qual2' -
+ 'cc_include' -
+ 'file'
+$ else
+$ cmd_msg = "MESSAGE " + msg_qual
+$ x = cmd_'typ'
+$ 'vo_c' x, " ", file
+$ 'x' 'file'
+$ endif
+$ ENDSUBROUTINE ! Compile
$!
$! Do a diff of the file specified in P1 with that in P2. If different
$! copy P1 to P2. This also covers if P2 doesn't exist, but not if P2
$!
$MoveIfDiff: subroutine
$ set NoOn
-$ set message/nof/noi/nos/not
-$ diff/out=nla0: 'p1' 'p2'
+$ define /user_mode sys$error nl:
+$ define /user_mode sys$output nl:
+$ differences 'p1' 'p2'
$ status = $status
-$ set message/f/i/s/t
-$ if ( status .ne. %X006C8009) ! if status is not "no diff"
+$ if (status .ne. %X006C8009) ! if status is not "no diff"
$ then
-$ copy 'p1' 'p2'
-$ purge/nolog 'p2'
+$ copy 'p1' 'p2'
+$ purge /nolog 'p2'
$ endif
$ on control_y then return ctrl_y ! SS$_CONTROLY
-$ ENDSUBROUTINE ! MoveIfDiff
+$ ENDSUBROUTINE ! MoveIfDiff
$!
$Common_Exit:
-$ set default 'origdir'
-$ exit
+$ set default 'orig_def'
+$ exit
projects / platform / upstream / curl.git / blobdiff