-start-sanitize-fr30
+Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
+
+ * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
+ to decide to print a space.
+
+1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
+
+ * i386-dis.c: Add AMD athlon instruction support.
+
+1999-08-10 Ian Lance Taylor <ian@zembu.com>
+
+ From Wally Iimura <iimura@microunity.com>:
+ * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
+ overflow at end of address space.
+ (generic_print_address): Use sprintf_vma.
+
+1999-08-08 Ian Lance Taylor <ian@zembu.com>
+
+ * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
+ MKDEP. Rebuild dependencies.
+ * Makefile.in: Rebuild.
+
+Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
+
+ * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
+ add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
+ unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
+ (print_insn_hppa): Add 64 bit condition completers.
+
+Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
+
+ * hppa-dis.c (print_insn_hppa): Change condition args to use
+ '?' prefix.
+
+Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
+
+ * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
+ code.
+
+1999-07-21 Ian Lance Taylor <ian@zembu.com>
+
+ From Mark Elbrecht:
+ * configure.bat: Remove; obsolete.
+
+1999-07-11 Ian Lance Taylor <ian@zembu.com>
+
+ * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
+ (generic_strcat_address): Add cast to avoid warning.
+ * i386-dis.c: Initialize all structure fields to avoid warnings.
+ Add ATTRIBUTE_UNUSED as appropriate.
+
+1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
+
+ * sparc-dis.c (print_insn_sparc): Differentiate between
+ addition and oring when guessing symbol for comment.
+
+1999-07-05 Nick Clifton <nickc@cygnus.com>
+
+ * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
+ constant.
+
+1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
+
+ * i386-dis.c: Mention intel mode specials in macro char comment.
+
+1999-06-21 Ian Lance Taylor <ian@zembu.com>
+
+ * alpha-dis.c: Don't include <stdlib.h>.
+ * arm-dis.c: Include "sysdep.h".
+ * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
+ "sysdep.h".
+ * Makefile.am: Rebuild dependencies.
+ * Makefile.in: Rebuild.
+
+1999-06-16 Nick Clifton <nickc@cygnus.com>
+
+ * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
+ SWIs.
+
+1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
+
+ * arm-dis.c (arm_regnames): Turn into a pointer to a register
+ name set.
+ (arm_regnames_standard): New variable: Array of ARM register
+ names according to ARM instruction set nomenclature.
+ (arm_regnames_apcs): New variable: Array of ARM register names
+ according to ARM Procedure Call Standard.
+ (arm_regnames_raw): New variable: Array of ARM register names
+ using just 'r' and the register number.
+ (arm_toggle_regnames): New function: Toggle the chosen register set
+ naming scheme.
+ (parse_disassembler_options): New function: Parse any target
+ disassembler command line options.
+ (print_insn_big_arm): Call parse_disassembler_options if any
+ are defined.
+ (print_insn_little_arm): Call parse_disassembler_options if any
+ are defined.
+
+1999-06-13 Ian Lance Taylor <ian@zembu.com>
+
+ * i386-dis.c (FWAIT_OPCODE): Define.
+ (used_prefixes): New static variable.
+ (fetch_data): Don't print an error message if we have already
+ fetched some bytes successfully.
+ (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
+ (prefix_name): New static function.
+ (print_insn_i386): If setjmp fails, indicating a data error, but
+ we have managed to fetch some bytes, print the first one as a
+ prefix or a .byte pseudo-op. If fwait is followed by a non
+ floating point instruction, print the first prefix. Set
+ used_prefixes when prefixes are used. If any prefixes were not
+ used after disassembling the instruction, print the first prefix
+ instead of printing the instruction.
+ (putop): Set used_prefixes when prefixes are used.
+ (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
+ (OP_DIR, OP_SIMD_Suffix): Likewise.
+
+1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
+
+ * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
+ Support signx %reg, clruw %reg.
+
+1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
+
+ * sparc-opc.c: Add aliases Solaris as supports.
+
+Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
+
+ * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
+ * Makefile.in: Regenerated.
+
+1999-06-03 Philip Blundell <philb@gnu.org>
+
+ * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
+ when target is PC-relative.
+
+1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
+
+ * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
+ MOVE MACSR,CCR.
+
+ * m68k-dis.c (fetch_arg): Add places `n', `o'.
+
+ * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
+ Add mcf5206e to appropriate instructions.
+ Add alias for MAC, MSAC.
+
+ * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
+ `N'.
+
+ * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
+ macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
+
+ * m68k-dis.c: Add format `u' and places `h', `m', `M'.
+
+1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
+
+ * i386-dis.c (Ed): Define.
+ (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
+ (Rw): Remove.
+ (OP_rm): Rename to OP_Rd.
+ (ONE): Remove.
+ (OP_ONE): Remove.
+ (putop): Add const to template and p.
+ (print_insn_x86): Delete.
+ (print_insn_i386): Merge old function print_insn_x86. Add const
+ to dp.
+ (struct dis386): Add const to name.
+ (dis386_att, dis386_intel): Add const.
+ (dis386_twobyte_att, dis386_twobyte_intel): Add const.
+ (names32, names16, names8, names_seg, index16): Add const.
+ (grps, prefix_user_table, float_reg): Add const.
+ (float_mem_att, float_mem_intel): Add const.
+ (oappend): Add const to s.
+ (OP_REG): Add const to s.
+ (ptr_reg): Add const to s.
+ (dofloat): Add const to dp.
+ (OP_C): Don't skip modrm, it's now done in OP_Rd.
+ (OP_D): Ditto.
+ (OP_T): Ditto.
+ (OP_Rd): Check for valid mod. Call Op_E to print.
+ (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
+ (OP_MS): Check for valid mod. Call Op_EM to print.
+ (OP_3DNowSuffix): Set obufp and use oappend rather than
+ strcat. Call BadOp() for errors.
+ (OP_SIMD_Suffix): Likewise.
+ (BadOp): New function.
+
+1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
+
+ * i386-dis.c (dis386_intel): Remove macro chars, except for
+ jEcxz. Change cWtR and cRtd to cW and cR.
+ (dis386_twobyte_intel): Remove macro chars here too.
+ (putop): Handle R and W macros for intel mode.
+
+ * i386-dis.c (SIMD_Fixup): New function.
+ (dis386_twobyte_att): Use it on movlps and movhps, and change
+ Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
+ (dis386_twobyte_intel): Same here.
+
+ * i386-dis.c (Av): Remove.
+ (Ap): remove lptr.
+ (lptr): Remove.
+ (OPSIMD): Define.
+ (OP_SIMD_Suffix): New function.
+ (OP_DIR): Remove dead code.
+ (eAX_reg..eDI_reg): Renumber.
+ (onebyte_has_modrm): Table numbering comments.
+ (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
+ (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
+ checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
+ and handle SIMD cmp insns in OP_SIMD_Suffix.
+ (info->bytes_per_line): Bump from 5 to 6.
+ (OP_None): Remove.
+ (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
+ (OP_3DNowSuffix): Ensure mnemonic index unsigned.
+
+ PIII SIMD support from Doug Ledford <dledford@redhat.com>
+ * i386-dis.c (XM, EX, None): Define.
+ (OP_XMM, OP_EX, OP_None): New functions.
+ (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
+ (GRP14): Rename to GRPAMD.
+ (GRP*): Add USE_GROUPS flag.
+ (PREGRP*): Define.
+ (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
+ (twobyte_has_modrm): Add SIMD entries.
+ (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
+ (grps): Add SIMD insns.
+ (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
+ oappend repz if uses_f3_prefix. Add code to handle new groups for
+ SIMD insns.
+
+ From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
+ * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
+ operand from Av to Jv.
+
+1999-05-07 Nick Clifton <nickc@cygnus.com>
+
+ * mcore-dis.c (print_insn_mcore): Use .short to display
+ unidentified instructions, not .word.
+
+1999-04-26 Tom Tromey <tromey@cygnus.com>
+
+ * aclocal.m4, configure: Updated for new version of libtool.
+
+1999-04-14 Doug Evans <devans@casey.cygnus.com>
+
+ * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
+ * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
+
+Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
+
+ * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
+ instructions.
+
+1999-04-10 Doug Evans <devans@casey.cygnus.com>
+
+ * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
+ * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
+
+1999-04-06 Ian Lance Taylor <ian@zembu.com>
+
+ * opintl.h (LC_MESSAGES): Never define.
+
+1999-04-04 Ian Lance Taylor <ian@zembu.com>
+
+ * i386-dis.c (intel_syntax, open_char, close_char): Make static.
+ (separator_char, scale_char): Likewise.
+ (print_insn_x86): Likewise.
+ (print_insn_i386): Likewise. Add declaration.
+
+1999-03-26 Doug Evans <devans@casey.cygnus.com>
+
+ * fr30-dis.c: Rebuild.
+ * m32r-dis.c: Rebuild.
+
+1999-03-23 Ian Lance Taylor <ian@zembu.com>
+
+ * m68k-opc.c: Change compare instructions to use "@s" rather than
+ ";s" when used with an immediate operand.
+
+1999-03-22 Doug Evans <devans@casey.cygnus.com>
+
+ * cgen-opc.c (cgen_set_cpu): Delete.
+ (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
+ * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
+ Rebuild.
+ * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
+ Rebuild.
+ * po/opcodes.pot: Rebuild.
+
+1999-03-16 Martin Hunt <hunt@cygnus.com>
+
+ * d30v-opc.c (mvtsys): Remove FLAG_LKR.
+
+1999-03-11 Doug Evans <devans@casey.cygnus.com>
+
+ * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
+ (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
+ (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
+ * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
+ * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
+ * m32r-opinst.c: Rebuild.
+
+1999-02-25 Doug Evans <devans@casey.cygnus.com>
+
+ * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
+ (cgen_hw_lookup_by_num): Rewrite.
+ * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
+ * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
+ * m32r-opinst.c: Rebuild.
+
+Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
+
+ * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
+ (insert_jhint): Fix insertion mask.
+ * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
+
+1999-02-10 Doug Evans <devans@casey.cygnus.com>
+
+ * Makefile.in: Rebuild.
+
+1999-02-09 Doug Evans <devans@casey.cygnus.com>
+
+ * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
+ * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
+ * Makefile.am: Remove references to them.
+ (HFILES): Add fr30-desc.h,m32r-desc.h.
+ (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
+ m32r-opinst.c.
+ (ALL_MACHINES): Update.
+ * configure.in: Redo handling of cgen_files.
+ (bfd_i960_arch): Delete i960c-*.lo files.
+ * configure: Regenerate.
+ * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
+ (hash_insn_array): Rewrite.
+ * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
+ (hash_insn_array): Rewrite.
+ * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
+ (cgen_lookup_insn,cgen_get_insn_operands): Define here.
+ (cgen_lookup_get_insn_operands): Ditto.
+ * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
+ * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
+ * po/POTFILES.in: Rebuild.
+ * po/opcodes.pot: Rebuild.
+
+Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.am: Rebuild dependencies.
+ (HFILES): Add fr30-opc.h.
+ (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
+ * Makefile.in: Rebuild.
+
+ * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
+ Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
+ AC_PROG_INSTALL.
+ * acconfig.h: Remove.
+ * configure: Rebuild with current autoconf/automake.
+ * aclocal.m4: Likewise.
+ * config.in: Likewise.
+ * Makefile.in: Likewise.
+
+Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
+
+ * m68k-opc.c: Correct move (not movew) to status word on 5200.
+
+Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
+
+ * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
+ * i386-dis.c (x_mode): Define.
+ (dis386): Remove.
+ (dis386_att): New.
+ (dis386_intel): New.
+ (dis386_twobyte): Remove.
+ (dis386_twobyte_att): New.
+ (dis386_twobyte_intel): New.
+ (print_insn_x86): Use new arrays.
+ (float_mem): Remove.
+ (float_mem_intel): New.
+ (float_mem_att): New.
+ (dofloat): Use new float_mem arrays.
+ (print_insn_i386_att): New.
+ (print_insn_i386_intel): New.
+ (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
+ (putop): Handle intel syntax.
+ (OP_indirE): Handle intel syntax.
+ (OP_E): Handle intel syntax.
+ (OP_I): Handle intel syntax.
+ (OP_sI): Handle intel syntax.
+ (OP_OFF): Handle intel syntax.
+
+
+
+1999-01-27 Doug Evans <devans@casey.cygnus.com>
+
+ * fr30-opc.h,fr30-opc.c: Rebuild.
+ * i960c-opc.h,i960c-opc.c: Rebuild.
+ * m32r-opc.c: Rebuild.
+
+Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
+
+ * hppa-dis.c: revert HP merge changes until HP gives us
+ an updated file.
+
+1999-01-19 Nick Clifton <nickc@cygnus.com>
+
+ * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
+ offsets as well as symbloic address.
+
+Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
+
+ * hppa-dis.c: fix comments and some indentation.
+
+1999-01-12 Doug Evans <devans@casey.cygnus.com>
+
+ * fr30-opc.c,i960c-opc.c: Regenerate.
+
+1999-01-11 Doug Evans <devans@casey.cygnus.com>
+
+ * fr30-opc.c: Regenerate.
+
+1999-01-06 Doug Evans <devans@casey.cygnus.com>
+
+ * m32r-dis.c: Regenerate.
+
+1999-01-05 Doug Evans <devans@casey.cygnus.com>
+
+ * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
+ * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
+ * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
+
+1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
+
+ * configure.in: Require autoconf 2.12.1 or higher.
+
+1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
+
+ * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
+
+Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-opc.c: Regenerated.
+
+1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
+
+ * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
+
+1998-12-15 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-opc.c,fr30-opc.h: Regenerated.
+
+1998-12-14 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-opc.c,fr30-opc.h: Regenerated.
+
+Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-opc.c,fr30-opc.h: Regenerated.
+
+Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * m32r-opc.c: Regenerate.
+
+Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
+
+ * dis-buf.c (generic_strcat_address): reformat to GNU coding
+ conventions. change sprintf call to an sprintf_vma call.
+
+Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
+
+Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
+
+ The following changes were made by
+ Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
+ David Taylor <taylor@texas.cygnus.com>, and
+ Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
+ merge in changes by HP; HP did not create ChangeLog entries.
+
+ * dis-buf.c (generic_strcat_address): new function.
+
+ * hppa-dis.c: Changes to improve hppa disassembly.
+ Changed formatting in : reg_names, fp_reg_names,control_reg,
+ New variables : sign_extension_names, deposit_names, conversion_names
+ float_test_names, compare_cond_names_double, add_cond_names_double,
+ logical_cond_names_double, unit_cond_names_double,
+ branch_push_pop_names, saturation_names, shift_names, mix_names,
+ New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
+ Move some definitions to libhppa.h: GET_FIELD, GET_BIT
+ (fput_const): renamed as fput_hex_const
+ (print_insn_hppa):
+ - use the macros fputs_filtered and
+ fput_decimal_const whenever possible; calls to sign_extend require
+ 2 params -- add a missing second param of 0.
+ - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
+ architecture version number of current machine. HP folks are
+ trying to handle situation where the target program was compiled
+ for PA 1.x (32-bit), but is running on a PA 2.0 machine and
+ visa versa.
+ - added new cases : 'g', 'B', 'm'
+ - added cases specifically for PA 2.0
+ - changed the following cases : '"', 'n', 'N', 'p', 'Z',
+ - calls to fput_const become calls to fput_hex_const
+
+1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
+
+ * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
+ (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
+ (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
+ * Makefile.in: Rebuilt.
+ * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
+ i960-dis.c to ta.
+ * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
+ * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
+
+Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
+
+Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
+
+ * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
+
+ * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
+ From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
+
+Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
+
+ * fr30-opc.c: Regenerate.
+
+Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
+
+Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
+
+ * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
+
Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
* fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
-end-sanitize-fr30
1998-11-30 Doug Evans <devans@casey.cygnus.com>
* cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
CGEN_INSN_BASE_VALUE.
-start-sanitize-cygnus
- * cgen-asm.in (insert_normal): Change start,length to unsigned int.
- New args word_offset, word_length. Rewrite.
- (FLD): Define.
- (insert_1): Fix lsb0 case.
- * cgen-dis.in (extract_normal): Change start,length to unsigned int.
- New args word_offset, word_length. Rewrite.
- (FLD): Define.
- (extract_1): Fix lsb0 case.
- * cgen-opc.in (FLD): Define.
-end-sanitize-cygnus
* m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
-start-sanitize-fr30
* fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
-end-sanitize-fr30
-
-start-sanitize-cygnus
-Mon Nov 30 11:52:44 1998 Doug Evans <devans@canuck.cygnus.com>
- * Makefile.am (CGENFILES): Add rtx-funcs.scm.
- * Makefile.in: Rebuild.
-
-end-sanitize-cygnus
-start-sanitize-fr30
Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
* fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
* fr30-dis.c: Regenerated.
* fr30-asm.c: Regenerated.
-end-sanitize-fr30
Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
* mips-opc.c (sync.p,sync.l): Swap insn values.
-start-sanitize-fr30
1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
* fr30-opc.c: Regenerate.
* fr30-opc.c: Regenerated.
* fr30-opc.h: Regenerated.
-end-sanitize-fr30
1998-11-18 Doug Evans <devans@casey.cygnus.com>
-start-sanitize-cygnus
- * cgen-asm.in (insert_1): Replace calls to bfd_getb8/putb8.
- (insert_normal, !CGEN_INT_INSN_P case): Only fetch enough bytes
- to hold value.
- (insert_insn_normal): Fix typo.
- * cgen-dis.c (cgen_dis_lookup_insn): Update type of `value' arg.
- * cgen-dis.in (extract_normal): Ditto. New arg `pc'.
- Rewrite ! CGEN_INT_INSN_P case.
- (extract_insn_normal): Ditto.
- (extract_1): New arg `pc'. All callers updated.
- Replace calls to bfd_getb8.
- (fill_cache): New fn.
- * cgen-opc.c (cgen_{get,put}_insn_value): Move here ...
- * cgen-opc.in: ... from here.
- (@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
-end-sanitize-cygnus
* m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
-start-sanitize-fr30
* fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
-end-sanitize-fr30
-start-sanitize-fr30
Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
* fr30-opc.c: Regenerated.
* disassemble.c (disassembler): Add support for FR30 target.
-end-sanitize-fr30
Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
-start-sanitize-cygnus
- * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
- CGEN_OPERAND_SEM_ONLY.
-end-sanitize-cygnus
* m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
-start-sanitize-fr30
* fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
* po/POTFILES.in: Regenerate.
* fr30-opc.c: Regenerate.
* fr30-opc.h: Regenerate.
-end-sanitize-fr30
+
Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
* m32r-asm.c: Regenerate.
-start-sanitize-fr30
Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
* configure.in: Added case for bfd_fr30_arch.
* po/POTFILES.in: Regenerated
* po/opcodes.pot: Regenerated
-end-sanitize-fr30
-start-sanitize-m32rx
-Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
- to bcl8,bncl8 entries.
- (macro_insn_table_entries): Add FILL_SLOT attribute
- to bcl8r,bncl8r entries.
-
-end-sanitize-m32rx
Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
* configure.in: detect cygwin* instead of cygwin32*
* mips-opc.c (IS_M): Added.
-start-sanitize-r5900
-Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
- and masks.
-
-end-sanitize-r5900
Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
-start-sanitize-cygnus
- * cgen-asm.in (insert_1): New function.
- (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
- (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
- (@arch@_cgen_assemble_insn): Update type of `buf' arg.
- * cgen-dis.in (extract_1): New function.
- (extract_normal): buf_ctrl renamed to ex_info, update type.
- Progress on handling of CGEN_INT_INSN_P.
- (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
- Update handling of CGEN_INT_INSN_P. Handle errors from
- @arch@_cgen_extract_operand.
- (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
- (default_print_insn): Renamed from print_insn.
- Handle ! CGEN_INT_INSN_P.
- (print_insn_@arch@): Handle error returns from print_insn.
- * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
- (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
- (@arch@_cgen_lookup_get_insn_operands): Ditto.
-end-sanitize-cygnus
* m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
-start-sanitize-am33
-Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c: Allow autoincrement stores using the same register
- for source and destination operands.
-
-Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c: DSP instrutions which only write to one general
- register have no restrictions on matching operands.
-
- * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
-
-end-sanitize-am33
Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
* m32r-opc.h,m32r-opc.c: Regenerate.
-start-sanitize-am33
-Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
-
-end-sanitize-am33
Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
* i386-dis.c (OP_3DNowSuffix): New static function.
* d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
class.
-start-sanitize-sky
-Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
-
-end-sanitize-sky
Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
* m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
-start-sanitize-nortel-ppc750
1998-09-09 Michael Meissner <meissner@cygnus.com>
* ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
to/from SPRs.
-end-sanitize-nortel-ppc750
Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
* arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
* d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
MSUB and MSUBS instructions.
-start-sanitize-r5900
-Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
-
- * mips-opc.c: Insert contents of vu0.h, rather than including it.
- * vu0.h: Remove.
- * Makefile.am: Rebuild dependencies.
- * Makefile: Rebuild.
-
-end-sanitize-r5900
Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
* ppc-opc.c (powerpc_operands): Omit parens around additions in
Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
-start-sanitize-coldfire
- * m68k-opc.c: Correct divsl, divul, remsl, and remul for
- ColdFire, as below for mulsl and mulul.
-
-end-sanitize-coldfire
From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
* m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
+, -, and d for ColdFire.
(cgen_dis_init): Delete.
* cgen-opc.c (all fns): New first arg of opcode table descriptor.
(cgen_current_{opcode_table_mach,endian}): Delete.
-start-sanitize-cygnus
- * cgen-asm.in (all fns): New first arg of opcode table descriptor.
- * cgen-dis.in (all fns): Ditto.
- * cgen-opc.in (all fns): Ditto.
-end-sanitize-cygnus
* m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
-start-sanitize-cygnus
- * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
-
- * cgen-dis.in (print_normal): Split into two.
- (print_address): New function.
- (extract_insn_normal): Clarify insn_value arg.
- (print_int_insn): Renamed from print_insn.
- (print_insn): New arg.
- (print_insn_@arch@): Open opcode table if not already done so.
- Move reading of insn into print_insn.
-
-end-sanitize-cygnus
Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
* d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
instructions.
-start-sanitize-m32rx
-Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
-
- Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
- accept an accumulator choice.
- * m32r-opc.c,m32r-opc.h: Regenerate.
-
-end-sanitize-m32rx
Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
* m10300-opc.c: Add entries for "no_match_operands" field in
the opcode table.
-start-sanitize-am33
-Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
- operand.
-
-end-sanitize-am33
Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
* m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
-start-sanitize-am33
-Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c: Add DSP autoincrement memory loads/stores.
-
- * m10300-opc.c: Add autoincrement memory loads/stores.
-
-end-sanitize-am33
-start-sanitize-r5900
-Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
-
- * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
- phmsubh respectively.
-
-end-sanitize-r5900
Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
-start-sanitize-cygnus
- * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
- CGEN_EXTRACT_FN.
- (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
- @arch_cgen_get_int_operand.
- * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
- Update call to @arch@_cgen_insert_operand.
- (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
- * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
- (extract_insn_normal): New arg `pc', callers updated.
- Update call to @arch@_cgen_extract_operand.
- (print_insn): Update call to CGEN_EXTRACT_FN.
-end-sanitize-cygnus
* m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
-start-sanitize-am33
-Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c: Fix load to sp and store from sp for the am33.
- Add more multimedia instructions.
-
-Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
- "mulu".
-
-end-sanitize-am33
-start-sanitize-r5900
-Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
-
- * mips-opc.c (pref): Enabled for the r5900.
-
-end-sanitize-r5900
Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
* i386-dis.c (ckprefix): Handle fwait specially only when it isn't
(OP_J): Remove unnecessary subtraction when 16-bit displacement
will be masked later.
-start-sanitize-am33
-Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
- instructions.
-
-Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
- from raw register #s to symbolic names to make debugging easier.
-
-end-sanitize-am33
Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
* m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
* m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
-start-sanitize-cygnus
- * Makefile.am (CGENDIR): Set via configure.
- (CGEN): New variable.
- (CGENFILES): object.scm renamed to cos.scm.
- (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
- (stamp-m32r): Pass prefix to run-cgen.
- * Makefile.in: Regenerate.
- * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
- * cgen-dis.in: Ditto.
- * cgen-opc.in: Ditto.
- * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
- * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
- * configure: Regenerate.
-end-sanitize-cygnus
-start-sanitize-am33
-Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
-
-Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c: Reorder more instructions so that we do not
- accidentally match a mn10300 instruction when we really
- wanted an am33 instruction.
-
-end-sanitize-am33
Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
* m10300-dis.c: Only recognize instructions from the currently
(disassembler): Add case for ARCH_vax.
* makefile.vms: Support compilation on vms/vax.
-start-sanitize-sky
-Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
-
- * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
- the DVP_OPERAND_RELOC_11_S4 relocation.
-
-end-sanitize-sky
-start-sanitize-am33
-Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
- 4 byte instructions.
- (disassemble): Correctly handle FMT_D10 instructions.
-
- * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
- am33 shift instructions.
-
- * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
- 3 byte instructions.
- (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
- FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
-
- * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
- (mn10300_opcodes): Reorder so as to try and select opcodes from
- the core chip when multiple alternatives exist. Change several
- am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
- "macbu" instructions. Fix typos in a couple DSP instructions too.
-
-end-sanitize-am33
Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
* m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
instructions. Support (sp) addressing mode by expanding it into
(0,sp).
-start-sanitize-sky
-Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
-
- * dvp-opc.c (LIMM11, LUIMM15): New symbol types
- DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
- be used as immediate values.
-
-end-sanitize-sky
-start-sanitize-am33
-Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c: Support 4 byte DSP instructions.
-
-end-sanitize-am33
Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
* mips-dis.c (_print_insn_mips): Fix argument interchange typo.
-start-sanitize-am33
-Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c: Support 6 and 7 byte am33 instructions.
-
-end-sanitize-am33
Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
* m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
-start-sanitize-am33
-Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
-
- * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
- found on the mn10300.
-
-end-sanitize-am33
1998-06-18 Ulrich Drepper <drepper@cygnus.com>
* i386-dis.c: Add support for fxsave, fxrstor, sysenter and
Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
-start-sanitize-am33
- * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
- operands for the am33.
- (mn10300_opcodes): Add new instructions from the am33.
-end-sanitize-am33
* m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
0; produce error message for shifts of size 32 (or 64 for 64-bit
shifts), because the hardware doesn't support them.
-start-sanitize-r5900
-Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
-
- * mips-opc.c (c.lt.s): Remove r5900 specific variant.
- (c.le.s): Likewise.
-
- * vu0.h (sqc2): Fix opcode.
-
- * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
- (sqrt.s): Likewise.
-
-end-sanitize-r5900
-start-sanitize-cygnus
-Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
-
- * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
- Change pinfo to use WR_HILO.
-
-end-sanitize-cygnus
Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
* d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
-start-sanitize-cygnus
- * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
- * cgen-dis.in (extract_normal): Likewise.
-end-sanitize-cygnus
* m32r-asm.c,m32r-dis.c: Regenerate.
-start-sanitize-sky
-Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
-
-end-sanitize-sky
-start-sanitize-r5900
-Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
-
- * mips-opc.c (multu1): Add two operand variant for the r5900.
-
-end-sanitize-r5900
Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
* mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
with a shift count of 0.
-start-sanitize-r5900
-Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
-
-Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
-
- * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
- (_print_insn_mips): Likewise.
- * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
- completers.
-
-end-sanitize-r5900
Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
* cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
(cgen_hw_lookup_by_num): New function.
-start-sanitize-m32rx
- * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
-
-end-sanitize-m32rx
Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
* m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
* sparc-dis.c (print_insn_sparc): Always fetch instructions
as big-endian on SPARClite.
-start-sanitize-m32rx
-Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
-
- * m32r-opc.c: Regenerated - SPECIAL attribute added to some
- insns.
- * m32r-opc.h: Regenerated - SPECIAL attribute added to some
- insns.
-
-end-sanitize-m32rx
Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
* d30v-opc.c (pre_defined_register): Remove alias for r0.
-start-sanitize-r5900
-Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * mips-opc.c (break): Added 20-bit single-operand break
- instruction for R5900 only.
-
-end-sanitize-r5900
Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
* po/Make-in (install-info): New target.
* mips-dis.c (print_insn_arg): Implement 'q' operand format used
for above optional argument.
-start-sanitize-cygnus
-Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
-
- * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
- * m32r-opc.h: Regenerate.
-
-end-sanitize-cygnus
Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
* makefile.vms: Run dec c with /nodebug.
* opintl.h (_): Define as dgettext.
-start-sanitize-cygnus
-Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * configure.in: Add support for --enable-cgen-maint.
- * Makefile.am (M32R_DEPS): New variable.
- (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
- * aclocal.m4: Regenerate.
- * Makefile.in: Regenerate.
- * configure: Regenerate.
-
- * Makefile.am (CGENFILES): Add minsn.scm.
-
-end-sanitize-cygnus
Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
* cgen-asm.c: Internationalised.
-start-sanitize-cygnus
- * cgen-asm.in: Internationalised.
- * cgen-opc.in: Internationalised.
-end-sanitize-cygnus
* m32r-asm.c: Internationalised.
* m32r-dis.c: Internationalised.
* m32r-opc.c: Internationalised.
* cgen-asm.c: Internationalised.
* d30v-dis.c: Internationalised.
* dis-buf.c: Internationalised.
-start-sanitize-sky
- * dvp-dis.c: Internationalised.
- * dvp-opc.c: Internationalised.
-end-sanitize-sky
* h8300-dis.c: Internationalised.
* h8500-dis.c: Internationalised.
* i386-dis.c: Internationalised.
* cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
(cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
(cgen_macro_insn_count): New function.
-start-sanitize-cygnus
- * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
- All callers updated. Sanity check result of extract fn.
- (@arch@_cgen_get_insn_operands): Change result type to void.
- Delete args insn_value, length. New arg fields. All callers updated.
- (@arch@_cgen_lookup_get_insn_operands): New function.
-end-sanitize-cygnus
* m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
* i386-dis.c (OP_DSSI): Print segment override.
-start-sanitize-r5900
-Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * mips-opc.c (msub.s): Correct mask pattern for disassembly.
-
-end-sanitize-r5900
-start-sanitize-r5900
-Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * mips-opc.c (madd.s): Correct mask pattern for disassembly.
-
-end-sanitize-r5900
-start-sanitize-r5900
-Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
-
- * vu0.h (vlqd, vlqi): Update per revised specs.
-
-end-sanitize-r5900
-start-sanitize-sky
-Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
- (vif_operands): Update.
- (vif_get_unpackloc): Delete.
- (state_vif_unpackloc{,_star_p}): Delete.
- (dvp_opcode_init_parse): Update.
- (vif_unpack_len_value): Avoid divide by zero.
-
-end-sanitize-sky
-start-sanitize-r5900
-Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * vu0.h: Specs changed for VCALLMSR bit pattern.
- * mips-dis.c: (print_insn_arg) Matching change.
-
-end-sanitize-r5900
Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
* arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
* aclocal.m4: Rebuild with new libtool.
* configure, Makefile.in: Rebuild.
-start-sanitize-r5900
-Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
-
- * vu0.h: Corrected bit pattern for VMAXI opcode.
-
-end-sanitize-r5900
Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
* m32r-opc.c: Regenerate.
-start-sanitize-sky
-Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-opc.c (vif_macros): Tweak unpackloc operand.
- (dvp_expand_macro): Implement.
- (insert_vif_datalen): Record value with max+1 -> 0 conversion.
- (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
-
-end-sanitize-sky
Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
* Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
* m32r-opc.c: Use signed immediate values for CMPUI instruction.
-start-sanitize-m32rx
-Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
-
- * m32r-opc.c: Fix bit patterns for SAT and SATB.
-
-end-sanitize-m32rx
Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
* ns32k-dis.c (bit_extract_simple): New function to extract bits
using fetch_data().
(invalid_float): use bit_extract_simple() instead of bit_extract().
-start-sanitize-m32rx
-Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
-
- * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
- * m32r-opc.h: Add extra control registers.
-
-end-sanitize-m32rx
Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
From H.J. Lu <hjl@gnu.org>:
* arc-dis.c (print_insn): Add casts to avoid warnings.
* cgen-opc.c (cgen_keyword_lookup_name): Likewise.
* d10v-dis.c (dis_long, dis_2_short): Likewise.
-start-sanitize-sky
- * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
- (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
- (parse_bc, parse_vfreg, parse_accdest): Likewise.
- (parse_ffstreg, parse_vif_mode): Likewise.
-end-sanitize-sky
* m10200-dis.c (disassemble): Likewise.
* m10300-dis.c (disassemble): Likewise.
* ns32k-dis.c (print_insn_ns32k): Likewise.
* cgen-opc.c (cgen_keyword_search_next): Likewise.
* d10v-dis.c (dis_long, dis_2_short): Likewise.
* d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
-start-sanitize-sky
- * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
- * dvp-opc.c (parse_dest1, print_uflags): Likewise.
- (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
-end-sanitize-sky
* ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
-start-sanitize-tic80
* tic80-dis.c (print_one_instruction): Likewise.
-end-sanitize-tic80
* w65-dis.c (print_operand): Likewise.
* z8k-dis.c (fetch_data): Likewise.
* a29k-dis.c: Add return type for find_byte_func_type.
* d30v-dis.c (lookup_opcode): Parenthesize assignments in
conditionals.
(extract_value): Fully parenthesize expression.
-start-sanitize-sky
- * dvp-opc.c: Include <ctype.h>.
- (print_sdest): Add default case to switch.
-end-sanitize-sky
* h8500-dis.c (print_insn_h8500): Initialize local variables.
* h8500-opc.h (h8500_table): Fully bracket initializer.
* w65-opc.h (optable): Likewise.
* mips-opc.c: Add "sync.l" and "sync.p".
-start-sanitize-sky
-Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-opc.c (extract_vif_datalen): Rewrite.
- (vif_insn_len): Perform 0->max+1 conversion for direct length.
-
-Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-dis.c (print_insn): Print unpack address in hex.
- * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
- Don't skip over '*', just record it.
- (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
- (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
- Don't skip over '*', just record it.
- (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
- (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
- (vif_opcodes): Likewise.
- (state_vif_{mpg,unpack}loc_star_p): New static locals.
- (vif_macros,vif_macro_count): New globals.
- (vif_unpack_len_value): New arguments wl,cl. All callers updated.
- (vif_set_{mpg,unpack}loc): Delete. All callers updated.
- (vif_get_wl_cl): New function.
- (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
-
-end-sanitize-sky
Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* m68k-dis.c (print_insn_m68k): Use info->mach to select the
symbol. Fix indentation.
(print_insn_little_arm): Likewise.
-start-sanitize-r5900
-Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
-
- * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
- opcode extensions.
-
-end-sanitize-r5900
-start-sanitize-m32rx
-Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
-
- * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
- (PR15418).
-
-end-sanitize-m32rx
-start-sanitize-sky
-Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-opc.c (vif_operand_datalen_special): New global.
-
-end-sanitize-sky
-start-sanitize-r5900
-Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
-
- * vu0.h (vcallms): Use 'O' for call target operand.
- * mips-dis.c (print_insn_arg): Handle 'O'.
-
-end-sanitize-r5900
Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
* configure.in: Use AM_DISABLE_SHARED.
* aclocal.m4, configure: Rebuild with libtool 1.2.
-start-sanitize-r5900
-Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
-
- * mips-dis.c: Change '%' to '#' in r5900 support.
- * vu0.h: Likewise.
-
-end-sanitize-r5900
Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
These patches are courtesy of Jonathan Walton and Tony Thompson
* arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
both the offset and the label closest to the destination.
-start-sanitize-r5900
-Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
-
- * vu0.h: New file with cop2/vu0 instructions.
- * mips-opc.c: Include vu0.h.
- * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
- J, Q, X, and U.
- (print_insn_mips): Do not emit a tab after an instruction if the
- first arg is an instruction completer (&). If the next arg is an
- escape character (%), then print the next arg verbatim.
- * Makefile.am (mips-opc.lo): Depend on vu0.h
-
-end-sanitize-r5900
-start-sanitize-sky
-Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-opc.c (vif_opcodes): Add stcycl.
-
-Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-dis.c (print_dma): Change length from 16 to 8.
-
-end-sanitize-sky
Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
* m32r-opc.h: Regenerate.
-start-sanitize-sky
-Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-opc.c (print_dest1): Print dest spec again.
- (print_vfreg,print_accdest): Likewise.
- (vif_unpack_len): Round result up to word boundary.
-
-end-sanitize-sky
-start-sanitize-vr4320
-Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
-
- * mips-opc.c ("clz","dclz"): Added the 4320 versions.
-
-Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
-
- * mips-opc.c ("macc*","mul*"): Added the 4320 versions
- of these.
-
-end-sanitize-vr4320
-start-sanitize-sky
-Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-dis.c (print_gif): Fix length calcs for gifimage.
- (print_insn): Do mask comparison on proper opcode word.
- Print unsigned values in hex.
- * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
- (parse_bc): Catch missing dest.
- (parse_vfreg): Replace atoi call with strtol.
- (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
- (parse_bcftreg,parse_ffstreg): Handle missing dest.
- (extract_gif_eop): New function.
- (gif_operands): Update eop entry.
- (VGIFOP,VGIFNREGS): Fix calcs.
- (extract_gif_prim): Set *pinvalid to 1 if prim not used.
- (gif_regs): Add entry for unused 11 case.
- (print_gif_regs): Print empty list instead of nothing.
- (extract_gif_nloop): Fix value calc.
- (print_gif_nloop): Always print value, even if 0.
- (insert_vif_wlcl,extract_vif_wlcl): New functions.
- (vif_operands): Use them for wl,cl fields.
- (state_vif_wl,state_vif_cl): New static locals.
- (parse_vif_mode): Handle numeric args.
- (vif_unpack_len_value,vif_unpack_len): New functions.
- (vif_insn_len): Call vif_unpack_len.
-
-end-sanitize-sky
Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
* m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
-start-sanitize-cygnus
-Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
-
- * cgen-asm.in: Move insertion of generated routines to top of file.
- (insert_normal): Add prototype. Delete `shift' arg.
- * cgen-dis.in: Move insertion of generated routines to top of file.
- (extract_normal): Add prototype. Delete `shift' arg.
- (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
- (print_keyword): Add prototype. Fix type of `attrs' arg.
-
-end-sanitize-cygnus
-start-sanitize-vr4320
-Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
-
- * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
- * mips-opc.c ("mac","dmac") : Added 4320 insns.
-
-end-sanitize-vr4320
Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
* arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
* alpha-opc.c (cvtqs) There is no such thing.
(cvttq): Missing most of the /*d variants.
-start-sanitize-r5900
-Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
- opcode.
- (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
- (r5900/msub.s): Takes three operands, not four. Fix opcode.
-
-end-sanitize-r5900
Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
* d30v-opc.c (d30v_opcode_table): Indicate which instructions are
delayed branches or jumps.
-start-sanitize-sky
-Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-opc.c (vif_operands): Add unpack[u] support.
- (vif_opcodes): Ditto.
- (*_vif_imrubits): Renamed from *_vif_imrbits.
-
-Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-dis.c (print_insn): Handle word number.
- Handle mips address vs vu address.
- * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
- (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
- ({insert,extract}_dma_addr): Fix word ofset.
- ({insert,print}_gif_regs): Fix encode/decode.
-
-end-sanitize-sky
Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
* arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
to *info->symbols.
* mips-dis.c (print_insn_{big,little}_mips): Likewise.
* tic30-dis.c (print_branch): Likewise.
-start-sanitize-sky
- * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
- * dvp-dis.c (dvp_info_mach_type): New function.
- (print_insn_dvp): Call it.
- (print_vif): Return length of 4 if mpg or direct insn so following
- insns get properly disabled.
- (print_gif): Fix word order.
- * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
- (gif_operands): Fix word order.
- (gif_opcodes): Likewise.
- ({insert,extract,print}_gif_regs): Likewise.
- (gif_regs): Add new register number/name changes.
- (dma_opcodes): Add dmarefe insn.
-end-sanitize-sky
Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
* cgen-asm.c: Include symcat.h.
* cgen-dis.c,cgen-opc.c: Ditto.
-start-sanitize-cygnus
- * cgen-asm.in,cgen-dis.in: Ditto.
-end-sanitize-cygnus
* m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
-start-sanitize-sky
-Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-opc.c (extra_dma_flags): Fix typos.
- (dma_operands): Fix word numbers.
- (dma_opcodes): Likewise.
- ({insert,extract}_dma_flags): Likewise.
-
-end-sanitize-sky
Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
* mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
-start-sanitize-sky
-Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-dis.c (print_gif): Complete.
- * dvp-opc.c (gif_operands,gif_opcodes): Complete.
- (state_gif_{nregs,regs,nloop}): New static locals.
- (*_gif_*): Complete.
- (dvp_opcode_init_{parse,print}): Init gif state locals.
- (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
- (vif_insn_len): Handle `unpack'.
- ({insert,extract}_dma_flags): Complete.
-
-end-sanitize-sky
-start-sanitize-r5900
-Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
-
- * mips-opc.c (mula.s): Renamed from multa.s.
-
-end-sanitize-r5900
Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
* m32r-opc.[ch]: Regenerate.
-start-sanitize-sky
-Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
-
- * dvp-opc.c (dma_operands): Rewrite.
- (dma_operand_{count,addr}): New globals.
- (dma_opcodes): Rewrite. Add "dmaend" with no operands.
- (insert_dma_addr): Insert value into insn.
- (extract_dma_addr): Extract value from insn.
-
-Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-dis.c (print_vu): Handle loi insns.
- (print_insn): Likewise.
- * dvp-opc.c (vu_lower_opcodes): Add "loi".
- (vu_operands): Make LDEST1 a FAKE operand.
- (parse_dest1): Allow elided argument.
- (print_dest1): Don't print the argument.
-
-Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-opc.c (parse_vfreg): Dest spec is optional.
- (print_vfreg): Don't print dest spec.
- (parse_accdest): Dest spec is optional.
- (print_accdest): Don't print dest spec.
-
-end-sanitize-sky
Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
-start-sanitize-cygnus
- * Makefile.am (CGENFILES): Update.
- * Makefile.in: Regenerate.
- * cgen-asm.in (insert_normal): Result is error message now.
- Validate value to be inserted.
- (insert_insn_normal): Result is error message now.
- (@arch@_cgen_assemble_insn): Update.
-end-sanitize-cygnus
* cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
arguments. Don't perform validation here.
* m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
-start-sanitize-cygnus
- * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
- operand instance list.
-end-sanitize-cygnus
* m32r-opc.c: Regenerate.
Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
-start-sanitize-cygnus
- * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
- Ignore ALIAS insns if asked to.
- (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
-end-sanitize-cygnus
* m32r-opc.c: Regenerate.
-start-sanitize-sky
- * dvp.opc.c: Nicely format opcode tables.
- (vu_operands): New element UFLAGS.
- (parse_uflags,print_uflags): New functions.
- (vu_upper_opcodes): Add UFLAGS to all insns.
-
-end-sanitize-sky
Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
Fix rac to accept only a0:
Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
-start-sanitize-cygnus
- * cgen-opc.in: New file.
- * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
- * Makefile.am (CGENFILES): Add cgen-opc.in.
- * Makefile.in: Regenerate.
- * cgen-dis.in (*): Use PTR instead of void *.
- (print_insn): Delete unused vars `i', `syntax'.
-end-sanitize-cygnus
* cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
(cgen_hw_lookup): Make result const.
* m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
-start-sanitize-sky
-Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
- (vif_opcodes): Update renamed insns.
- * dvp-dis.c (*): Likewise.
-
-end-sanitize-sky
Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
* configure, aclocal.m4: Rebuild with new libtool.
(ALL_MACHINES): Add tic30-dis.lo.
* configure, Makefile.in: Rebuild.
-start-sanitize-m32rx
-Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
-
- * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
- versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
- macwhi-a and macwlo-a instructions.
-
-end-sanitize-m32rx
-start-sanitize-sky
-Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
-
- * dvp-opc.c, fixed encoding of a bunch of instructions to
- be consistent with the asmvu assembler (and inconsistent
- with the specification).
-
-Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
-
- * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
- in the opcode table. The pkemscalf instruction must come first.
-
-Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
-
- * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
-
-end-sanitize-sky
Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
* m32r-opc.h (HAVE_CPU_M32R): Define.
-start-sanitize-sky
-Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
-
- * dvp-dis.c, dvp-opc.c: New files.
- * configure.in: Compile them if bfd_dvp_arch, as well as mips.
- * configure: Regenerate.
- * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
- (dvp-dis.lo,dvp-opc.lo): Add rules for.
- (mips-dis.lo): Compile with @archdefs@.
- * Makefile.in: Regenerate.
- * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
- * mips-dis.c (print_insn_little_mips): Check for DVP insns.
-
-end-sanitize-sky
Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
* v850-opc.c (insertion routines): If both alignment and size is
(print_operand): If there's a reloc, don't calculate the
address because they could be in different sections.
-start-sanitize-cygnus
-Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
-
- * cgen.sh: Rewrite to be like simulator's version.
- * Makefile.am (cgen): Update call to cgen.sh.
- * Makefile.in: Regenerate
-
-end-sanitize-cygnus
Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
* mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
4010 these days. If object files someday indicate which processor
variant they're intended for, we can do a better job at this.
-start-sanitize-r5900
-Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
-
- * mips-opc.c (c.lt.s): Add r5900 variant.
- (c.le.s): Likewise.
-
-end-sanitize-r5900
Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
* cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
* cgen-opc.c: Clean up pass over `struct foo' usage.
(cgen_keyword_lookup_value): Handle "" entry.
(cgen_keyword_add): Likewise.
-start-sanitize-cygnus
- * Makefile.am: Add cgen support.
- * Makefile.in: Regenerate.
- * configure.in: Add cgen support.
- * configure: Regenerate.
- * aclocal.m4: Regenerate.
- * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
-end-sanitize-cygnus
Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
* m68k-opc.c (halt, pulse): Enable them on the 68060.
-start-sanitize-tic80
Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
* tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
PC relative offset forms before the 15 bit forms. An assembler command
line option now chooses the default.
-end-sanitize-tic80
-start-sanitize-r5900
-Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
-
- * mips-opc.c: Add many missing r5900 instructions.
-
-end-sanitize-r5900
Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
* d30v-opc.c (d30v_opcode_table): Set new flags bits
original source of this bit of code. It's not clear what the best fix
would be, though.
-start-sanitize-r5900
-Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
-
- * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
-end-sanitize-r5900
-start-sanitize-tic80
Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
* tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
(tic80_opcodes): Reorder table entries to put the 32 bit PC relative
offset forms before the 15 bit forms, to default to the long forms.
-end-sanitize-tic80
Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
* alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
unsigned, not signed.
(d30v_format_table): Add SHORT_CMPU cases for cmpu.
-Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
-
- * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
- * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
- (ftrv): Slay the cut-and-paste monster.
-
Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
* d10v-dis.c (print_operand):
sh-opc.h (sh_table): Remove ftst/nan.
-start-sanitize-cygnus
-Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
-
- * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
- (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
- last.
- * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
-
-end-sanitize-cygnus
-start-sanitize-tx49
-Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
-
- * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
- Add tx49 insns and configury.
-
-end-sanitize-tx49
Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
* mips-opc.c (ffc, ffs): Fix mask.
Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
* mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
-start-sanitize-cygnus
- Added VR5400 instructions.
- (N5): New cpu-id macro.
-end-sanitize-cygnus
(WR_HILO, RD_HILO, MOD_HILO): New macros.
Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
values, rather than assuming that short is 16 bits.
(OP_sI, OP_J, OP_DIR): Likewise.
-start-sanitize-v850e
Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
* v850-dis.c (v850_sreg_names): Use symbolic names for higher
system registers.
-end-sanitize-v850e
Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
* v850-opc.c: Fix typo in comment.
* aclocal.m4: Rebuild with new libtool.
* configure: Rebuild.
-start-sanitize-v850e
Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
* v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
-end-sanitize-v850e
Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
* sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
* mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
-start-sanitize-tx19
- * mips16-opc.c: Added mips16 sdbbp.
-end-sanitize-tx19
Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
* d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
-start-sanitize-v850e
Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
* v850-dis.c (disassemble): Improved display of register lists.
-end-sanitize-v850e
Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
* sparc-opc.c (sparc_opcodes): Fix assembler args to
* v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
where r0 is being used as a destination register.
-start-sanitize-v850e
Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
* v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
-end-sanitize-v850e
-
-Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
-
- * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
- (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
- (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
- Add insns to access SGR and DBR.
- * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
* alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
-start-sanitize-v850e
Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
* v850-opc.c (v850_opcodes[]): Remove use of flag field.
* configure (cgen_files): Add support for v850ea target.
* configure.in (cgen_files): Add support for v850ea target.
-end-sanitize-v850e
Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
-start-sanitize-v850e
* v850-dis.c (disassemble): Add support for v850EA instructions.
* v850-opc.c (insert_i5div, extract_i5div): New Functions.
extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
insert_spe, extract_spe): New Functions.
(v850_opcodes): Add v850E instructions.
-end-sanitize-v850e
* v850-opc.c: Reorganised and re-layed out to improve readability
and portability.
* mips-opc.c: Fix typo/thinko in "eret" instruction.
-start-sanitize-r5900
-Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
-
- * mips-opc.c: Fix coding of mtsa.
-
-end-sanitize-r5900
Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
* sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
precision FP, mark it as such. Likewise for double precision
FP. Mark ISA1 insns. Consolidate duplicate opcodes where
possible.
-start-sanitize-r5900
- (mips_builtin_opcodes): Remove non-existant r5900 instructions
-end-sanitize-r5900
-
-start-sanitize-r5900
-Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
-
- * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
- "pexew" as synonyms for "pintoh", "pexoh", "pexow".
-end-sanitize-r5900
Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
* ppc-opc.c (extract_nsi): make unsigned expression signed before
* m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
-start-sanitize-coldfire
-Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
-
- * m68k-opc.c (m68k_opcodes): Provide coldfire division module
- instructions.
-
-end-sanitize-coldfire
Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
* mn10200-opc.c: Change "trap" to "syscall".
* m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
-start-sanitize-tic80
Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
* tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
* tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
-end-sanitize-tic80
Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
* d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
-start-sanitize-tic80
Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
* tic80-opc.c (LSI_SCALED): Renamed from this ...
(tic80_opcodes): Replace all occurances of LSI_SCALED with
OFF_SL_BR_SCALED.
-end-sanitize-tic80
Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
* mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
so that we can increase the size of the mips opcodes table
dynamically.
-start-sanitize-tic80
Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
* tic80-opc.c (tic80_predefined_symbols): Revert change to
value for a BITNUM operand.
* tic80-dis.c (print_operand_bitnum): Ditto.
-end-sanitize-tic80
Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
* d30v-opc.c: Removed references to FLAG_X.
* d30v-opc.c: New file.
* disassemble.c (disassembler) Add entry for d30v.
-start-sanitize-tic80
Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
* tic80-opc.c (tic80_predefined_symbols): Add symbolic
* tic80-dis.c (print_operand_bitnum): Remove code that did
one's complement for BITNUM values.
-end-sanitize-tic80
-start-sanitize-r5900
-Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
-
- * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
-
-end-sanitize-r5900
Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
* makefile.vms: Remove 8 bit characters. Update to latest
* m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
bytes_per_line.
-start-sanitize-tic80
Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
* tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
come after short immediate forms, making it easier for
assembler to select the right one for a given operand.
-end-sanitize-tic80
Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
* mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
display_endian.
(print_insn_mips16): Likewise.
-start-sanitize-r5900
-Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
-
- * mips-opc.c: add r5900.
-
-end-sanitize-r5900
-start-sanitize-tic80
Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
* tic80-opc.c (tic80_symbol_to_value): Changed to accept
register operands to use the new operand table entries.
Add "or" entries that are identical to "or.tt" entries.
-end-sanitize-tic80
Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
* mips16-opc.c: Add new cases of exit instruction for
registers in operands of exit instruction. Print `$' before
register names in operands of entry and exit instructions.
-start-sanitize-tic80
Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
* tic80-opc.c (tic80_predefined_symbols): Table of name/value
print_operand_condition_code, print_operand_bitnum):
Remove private tables and use tic80_value_to_symbol function.
-end-sanitize-tic80
Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-dis.c (print_operand): Change address printing
Added a comment explaining the situation. Thanks to Andreas
Schwab for pointing this out to me.
-start-sanitize-tic80
Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
* tic80-opc.c (tic80_opcodes): Expand comment to note that the
adjacent to each other in the table. Sort the entries for each
instruction so that this is true.
-end-sanitize-tic80
Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* m68k-dis.c: Include <libiberty.h>.
(print_insn_m68k): Sort the opcode table on the most significant
nibble of the opcode.
-start-sanitize-tic80
Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
* tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
* tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
to explain why it comes after the other vector opcodes.
-end-sanitize-tic80
Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
* m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
* m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
fix operand mask in the "moveml" entries for the coldfire.
-start-sanitize-tic80
Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
* tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
(tic80_opcodes): Add entries for "exts", "extu", "fadd",
"fcmp", and "fdiv".
-end-sanitize-tic80
Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
* mn10200-dis.c (disassemble): Mask off unwanted bits after
adding in current address for pc-relative operands.
-start-sanitize-tic80
Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
* tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
(tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
"bcnd", and "brcr" opcodes.
-end-sanitize-tic80
Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
* ppc-opc.c (powerpc_operands): Make comment match the
actual fields (no shift field).
* sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
-start-sanitize-tic80
* tic80-dis.c (print_insn_tic80): Replace abort stub with a
partial implementation, work in progress.
* tic80-opc.c (tic80_operands): Begin construction operands table.
(tic80_opcodes): Continue populating opcodes table and start
filling in the operand indices.
(tic80_num_opcodes): Add this.
-end-sanitize-tic80
Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
* Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
-start-sanitize-tic80
(tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
-end-sanitize-tic80
Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
* mips16-opc.c: Add "abs".
-start-sanitize-tic80
Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
* Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
* tic80-dis.c: Add file.
* tic80-opc.c: Add file.
-end-sanitize-tic80
Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.