* matches any character that may appear at places other than the start of an
* identifier. E.g. a period may only appear at the start of an identifier
* (for local labels), whereas a number may appear anywhere *but* at the
- * start.
+ * start.
*/
#define isidstart(c) ( isalpha(c) || (c)=='_' || (c)=='.' || (c)=='?' \
typedef uint32_t opflags_t;
/* Size, and other attributes, of the operand */
-#define BITS8 0x00000001L
-#define BITS16 0x00000002L
-#define BITS32 0x00000004L
-#define BITS64 0x00000008L /* x64 and FPU only */
-#define BITS80 0x00000010L /* FPU only */
+#define BITS8 0x00000001L
+#define BITS16 0x00000002L
+#define BITS32 0x00000004L
+#define BITS64 0x00000008L /* x64 and FPU only */
+#define BITS80 0x00000010L /* FPU only */
#define BITS128 0x20000000L
-#define FAR 0x00000020L /* grotty: this means 16:16 or */
+#define FAR 0x00000020L /* grotty: this means 16:16 or */
/* 16:32, like in CALL/JMP */
-#define NEAR 0x00000040L
-#define SHORT 0x00000080L /* and this means what it says :) */
+#define NEAR 0x00000040L
+#define SHORT 0x00000080L /* and this means what it says :) */
-#define SIZE_MASK 0x200000FFL /* all the size attributes */
+#define SIZE_MASK 0x200000FFL /* all the size attributes */
/* Modifiers */
#define MODIFIER_MASK 0x00000f00L
-#define TO 0x00000100L /* reverse effect in FADD, FSUB &c */
-#define COLON 0x00000200L /* operand is followed by a colon */
-#define STRICT 0x00000400L /* do not optimize this operand */
+#define TO 0x00000100L /* reverse effect in FADD, FSUB &c */
+#define COLON 0x00000200L /* operand is followed by a colon */
+#define STRICT 0x00000400L /* do not optimize this operand */
/* Type of operand: memory reference, register, etc. */
#define OPTYPE_MASK 0x0000f000L
#define REGISTER 0x00001000L /* register number in 'basereg' */
#define IMMEDIATE 0x00002000L
#define MEMORY 0x0000c000L
-#define REGMEM 0x00008000L /* for r/m, ie EA, operands */
+#define REGMEM 0x00008000L /* for r/m, ie EA, operands */
/* Register classes */
-#define REG_EA 0x00009000L /* 'normal' reg, qualifies as EA */
+#define REG_EA 0x00009000L /* 'normal' reg, qualifies as EA */
#define RM_GPR 0x00208000L /* integer operand */
#define REG_GPR 0x00209000L /* integer register */
-#define REG8 0x00209001L /* 8-bit GPR */
-#define REG16 0x00209002L /* 16-bit GPR */
-#define REG32 0x00209004L /* 32-bit GPR */
-#define REG64 0x00209008L /* 64-bit GPR */
-#define IP_REG 0x00801000L /* RIP or EIP register */
-#define RIPREG 0x00801008L /* RIP */
-#define EIPREG 0x00801004L /* EIP */
-#define FPUREG 0x01001000L /* floating point stack registers */
-#define FPU0 0x01011000L /* FPU stack register zero */
+#define REG8 0x00209001L /* 8-bit GPR */
+#define REG16 0x00209002L /* 16-bit GPR */
+#define REG32 0x00209004L /* 32-bit GPR */
+#define REG64 0x00209008L /* 64-bit GPR */
+#define IP_REG 0x00801000L /* RIP or EIP register */
+#define RIPREG 0x00801008L /* RIP */
+#define EIPREG 0x00801004L /* EIP */
+#define FPUREG 0x01001000L /* floating point stack registers */
+#define FPU0 0x01011000L /* FPU stack register zero */
#define RM_MMX 0x02008000L /* MMX operand */
-#define MMXREG 0x02009000L /* MMX register */
+#define MMXREG 0x02009000L /* MMX register */
#define RM_XMM 0x04008000L /* XMM (SSE) operand */
-#define XMMREG 0x04009000L /* XMM (SSE) register */
+#define XMMREG 0x04009000L /* XMM (SSE) register */
#define XMM0 0x04019000L /* XMM register zero */
-#define REG_CDT 0x00101004L /* CRn, DRn and TRn */
+#define REG_CDT 0x00101004L /* CRn, DRn and TRn */
#define REG_CREG 0x00111004L /* CRn */
#define REG_DREG 0x00121004L /* DRn */
#define REG_TREG 0x00141004L /* TRn */
#define REG_EIP 0x00801004L /* EIP relative addressing */
/* Special GPRs */
-#define REG_SMASK 0x000f0000L /* a mask for the following */
+#define REG_SMASK 0x000f0000L /* a mask for the following */
#define REG_ACCUM 0x00219000L /* accumulator: AL, AX, EAX, RAX */
#define REG_AL 0x00219001L
#define REG_AX 0x00219002L
int nprefix; /* number of entries in above */
enum opcode opcode; /* the opcode - not just the string */
enum ccode condition; /* the condition code, if Jcc/SETcc */
- int operands; /* how many operands? 0-3
+ int operands; /* how many operands? 0-3
* (more if db et al) */
operand oprs[MAX_OPERANDS]; /* the operands, defined as above */
extop *eops; /* extended operands */
* This is a single keyword used to select the driver.
*/
const char *shortname;
-
+
/*
* this is reserved for out module specific help.
const char *shortname;
/*
- * init - called initially to set up local pointer to object format,
+ * init - called initially to set up local pointer to object format,
* void pointer to implementation defined data, file pointer (which
* probably won't be used, but who knows?), and error function.
*/
* is encountered. 'directive' contains the first parameter to the
* DEBUG directive, and params contains the rest. For example,
* 'DEBUG VAR _somevar:int' would translate to a call to this
- * function with 'directive' equal to "VAR" and 'params' equal to
+ * function with 'directive' equal to "VAR" and 'params' equal to
* "_somevar:int".
*/
void (*debug_directive) (const char *directive, const char *params);
projects / platform / upstream / nasm.git / blobdiff