# Run this to generate all the initial makefiles, etc.
#name of package
-PKG_NAME=${PKG_NAME:-Package}
-srcdir=${srcdir:-.}
+test "$PKG_NAME" || PKG_NAME=Package
+test "$srcdir" || srcdir=.
# default version requirements ...
-REQUIRED_AUTOCONF_VERSION=${REQUIRED_AUTOCONF_VERSION:-2.53}
-REQUIRED_AUTOMAKE_VERSION=${REQUIRED_AUTOMAKE_VERSION:-1.4}
-REQUIRED_LIBTOOL_VERSION=${REQUIRED_LIBTOOL_VERSION:-1.4.3}
-REQUIRED_GETTEXT_VERSION=${REQUIRED_GETTEXT_VERSION:-0.10.40}
-REQUIRED_GLIB_GETTEXT_VERSION=${REQUIRED_GLIB_GETTEXT_VERSION:-2.2.0}
-REQUIRED_INTLTOOL_VERSION=${REQUIRED_INTLTOOL_VERSION:-0.25}
-REQUIRED_PKG_CONFIG_VERSION=${REQUIRED_PKG_CONFIG_VERSION:-0.14.0}
-REQUIRED_GTK_DOC_VERSION=${REQUIRED_GTK_DOC_VERSION:-1.0}
-REQUIRED_DOC_COMMON_VERSION=${REQUIRED_DOC_COMMON_VERSION:-2.3.0}
-REQUIRED_GNOME_DOC_UTILS_VERSION=${REQUIRED_GNOME_DOC_UTILS_VERSION:-0.4.2}
+test "$REQUIRED_AUTORECONF_VERSION" || REQUIRED_AUTORECONF_VERSION=2.53
+test "$REQUIRED_GLIB_GETTEXT_VERSION" || REQUIRED_GLIB_GETTEXT_VERSION=2.2.0
+test "$REQUIRED_INTLTOOL_VERSION" || REQUIRED_INTLTOOL_VERSION=0.25
+test "$REQUIRED_PKG_CONFIG_VERSION" || REQUIRED_PKG_CONFIG_VERSION=0.14.0
+test "$REQUIRED_GTK_DOC_VERSION" || REQUIRED_GTK_DOC_VERSION=1.0
+test "$REQUIRED_DOC_COMMON_VERSION" || REQUIRED_DOC_COMMON_VERSION=2.3.0
+test "$REQUIRED_GNOME_DOC_UTILS_VERSION" || REQUIRED_GNOME_DOC_UTILS_VERSION=0.4.2
# a list of required m4 macros. Package can set an initial value
-REQUIRED_M4MACROS=${REQUIRED_M4MACROS:-}
-FORBIDDEN_M4MACROS=${FORBIDDEN_M4MACROS:-}
+test "$REQUIRED_M4MACROS" || REQUIRED_M4MACROS=
+test "$FORBIDDEN_M4MACROS" || FORBIDDEN_M4MACROS=
# Not all echo versions allow -n, so we check what is possible. This test is
# based on the one in autoconf.
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ;;
- *c*,* ) ECHO_N=-n ;;
- *) ECHO_N= ;;
+ECHO_C=
+ECHO_N=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ;;
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
esac
# some terminal codes ...
-boldface="`tput bold 2>/dev/null`"
-normal="`tput sgr0 2>/dev/null`"
+if tty < /dev/null 1>/dev/null 2>&1; then
+ boldface="`tput bold 2>/dev/null`"
+ normal="`tput sgr0 2>/dev/null`"
+else
+ boldface=
+ normal=
+fi
printbold() {
- echo $ECHO_N "$boldface"
+ echo $ECHO_N "$boldface" $ECHO_C
echo "$@"
- echo $ECHO_N "$normal"
+ echo $ECHO_N "$normal" $ECHO_C
}
printerr() {
echo "$@" >&2
return 0
fi
- if test "x$vc_package" = "xautomake" -a "x$vc_min_version" = "x1.4"; then
- vc_comparator="="
- else
- vc_comparator=">="
- fi
- printbold "checking for $vc_package $vc_comparator $vc_min_version..."
+ printbold "checking for $vc_package >= $vc_min_version..."
for vc_checkprog in $vc_checkprogs; do
- echo $ECHO_N " testing $vc_checkprog... "
+ echo $ECHO_N " testing $vc_checkprog... " $ECHO_C
if $vc_checkprog --version < /dev/null > /dev/null 2>&1; then
vc_actual_version=`$vc_checkprog --version | head -n 1 | \
sed 's/^.*[ ]\([0-9.]*[a-z]*\).*$/\1/'`
fi
done
if [ "$vc_status" != 0 ]; then
- printerr "***Error***: You must have $vc_package $vc_comparator $vc_min_version installed"
+ printerr "***Error***: You must have $vc_package >= $vc_min_version installed"
printerr " to build $PKG_NAME. Download the appropriate package for"
printerr " from your distribution or get the source tarball at"
printerr " $vc_source"
printerr
+ exit $vc_status
fi
return $vc_status
}
}
# Usage:
+# print_m4macros_error
+# Prints an error message saying that autoconf macros were misused
+print_m4macros_error() {
+ printerr "***Error***: some autoconf macros required to build $PKG_NAME"
+ printerr " were not found in your aclocal path, or some forbidden"
+ printerr " macros were found. Perhaps you need to adjust your"
+ printerr " ACLOCAL_FLAGS?"
+ printerr
+}
+
+# Usage:
# check_m4macros
# Checks that all the requested macro files are in the aclocal macro path
# Uses REQUIRED_M4MACROS and ACLOCAL variables.
check_m4macros() {
# construct list of macro directories
- cm_macrodirs=`$ACLOCAL --print-ac-dir`
+ cm_macrodirs=`aclocal --print-ac-dir`
# aclocal also searches a version specific dir, eg. /usr/share/aclocal-1.9
# but it contains only Automake's own macros, so we can ignore it.
# Read the dirlist file, supported by Automake >= 1.7.
- if compare_versions 1.7 $AUTOMAKE_VERSION && [ -s $cm_macrodirs/dirlist ]; then
+ # If AUTOMAKE was defined, no version was detected.
+ if [ -z "$AUTOMAKE_VERSION" ] || compare_versions 1.7 $AUTOMAKE_VERSION && [ -s $cm_macrodirs/dirlist ]; then
cm_dirlist=`sed 's/[ ]*#.*//;/^$/d' $cm_macrodirs/dirlist`
if [ -n "$cm_dirlist" ] ; then
for cm_dir in $cm_dirlist; do
fi
done
fi
+ if [ "$cm_status" != 0 ]; then
+ print_m4macros_error
+ exit $cm_status
+ fi
if [ -n "$FORBIDDEN_M4MACROS" ]; then
printbold "Checking for forbidden M4 macros..."
# check that each macro file is in one of the macro dirs
done
fi
if [ "$cm_status" != 0 ]; then
- printerr "***Error***: some autoconf macros required to build $PKG_NAME"
- printerr " were not found in your aclocal path, or some forbidden"
- printerr " macros were found. Perhaps you need to adjust your"
- printerr " ACLOCAL_FLAGS?"
- printerr
+ print_m4macros_error
+ exit $cm_status
fi
- return $cm_status
}
# try to catch the case where the macros2/ directory hasn't been cleared out.
forbid_m4macro gnome-cxx-check.m4
-want_libtool=false
-want_gettext=false
want_glib_gettext=false
want_intltool=false
want_pkg_config=false
want_gtk_doc=false
want_gnome_doc_utils=false
+want_maintainer_mode=false
-configure_files="`find $srcdir -name '{arch}' -prune -o -name '.??*' -prune -o -name configure.ac -print -o -name configure.in -print`"
-for configure_ac in $configure_files; do
- if grep "^A[CM]_PROG_LIBTOOL" $configure_ac >/dev/null ||
- grep "^LT_INIT" $configure_ac >/dev/null; then
- want_libtool=true
+version_check autoreconf AUTORECONF autoreconf $REQUIRED_AUTORECONF_VERSION \
+ "http://ftp.gnu.org/pub/gnu/autoconf/autoconf-$REQUIRED_AUTORECONF_VERSION.tar.xz"
+
+find_configure_files() {
+ configure_ac=
+ if test -f "$1/configure.ac"; then
+ configure_ac="$1/configure.ac"
+ elif test -f "$1/configure.in"; then
+ configure_ac="$1/configure.in"
+ fi
+ if test "x$configure_ac" != x; then
+ echo "$configure_ac"
+ autoconf -t 'AC_CONFIG_SUBDIRS:$1' "$configure_ac" | while read dir; do
+ find_configure_files "$1/$dir"
+ done
fi
- if grep "^AM_GNU_GETTEXT" $configure_ac >/dev/null; then
- want_gettext=true
+}
+
+configure_files="`find_configure_files $srcdir`"
+
+for configure_ac in $configure_files; do
+ dirname=`dirname $configure_ac`
+ if [ -f $dirname/NO-AUTO-GEN ]; then
+ echo skipping $dirname -- flagged as no auto-gen
+ continue
fi
if grep "^AM_GLIB_GNU_GETTEXT" $configure_ac >/dev/null; then
want_glib_gettext=true
want_gnome_doc_utils=true
fi
+ # check that AM_MAINTAINER_MODE is used
+ if grep "^AM_MAINTAINER_MODE" $configure_ac >/dev/null; then
+ want_maintainer_mode=true
+ fi
+
+ if grep "^YELP_HELP_INIT" $configure_ac >/dev/null; then
+ require_m4macro yelp.m4
+ fi
+
# check to make sure gnome-common macros can be found ...
if grep "^GNOME_COMMON_INIT" $configure_ac >/dev/null ||
grep "^GNOME_DEBUG_CHECK" $configure_ac >/dev/null ||
grep "^GNOME_CXX_WARNINGS" $configure_ac >/dev/null; then
require_m4macro gnome-compiler-flags.m4
fi
+ if grep "^GNOME_CODE_COVERAGE" $configure_ac >/dev/null; then
+ require_m4macro gnome-code-coverage.m4
+ fi
done
-DIE=0
-
-#tell Mandrake autoconf wrapper we want autoconf 2.5x, not 2.13
-WANT_AUTOCONF_2_5=1
-export WANT_AUTOCONF_2_5
-version_check autoconf AUTOCONF 'autoconf2.50 autoconf autoconf-2.53' $REQUIRED_AUTOCONF_VERSION \
- "http://ftp.gnu.org/pub/gnu/autoconf/autoconf-$REQUIRED_AUTOCONF_VERSION.tar.gz" || DIE=1
-AUTOHEADER=`echo $AUTOCONF | sed s/autoconf/autoheader/`
-
-case $REQUIRED_AUTOMAKE_VERSION in
- 1.4*) automake_progs="automake-1.4" ;;
- 1.5*) automake_progs="automake-1.9 automake-1.8 automake-1.7 automake-1.6 automake-1.5" ;;
- 1.6*) automake_progs="automake-1.9 automake-1.8 automake-1.7 automake-1.6" ;;
- 1.7*) automake_progs="automake-1.9 automake-1.8 automake-1.7" ;;
- 1.8*) automake_progs="automake-1.9 automake-1.8" ;;
- 1.9*) automake_progs="automake-1.9" ;;
-esac
-version_check automake AUTOMAKE "$automake_progs" $REQUIRED_AUTOMAKE_VERSION \
- "http://ftp.gnu.org/pub/gnu/automake/automake-$REQUIRED_AUTOMAKE_VERSION.tar.gz" || DIE=1
-ACLOCAL=`echo $AUTOMAKE | sed s/automake/aclocal/`
-
-if $want_libtool; then
- version_check libtool LIBTOOLIZE libtoolize $REQUIRED_LIBTOOL_VERSION \
- "http://ftp.gnu.org/pub/gnu/libtool/libtool-$REQUIRED_LIBTOOL_VERSION.tar.gz" || DIE=1
- require_m4macro libtool.m4
-fi
-
-if $want_gettext; then
- version_check gettext GETTEXTIZE gettextize $REQUIRED_GETTEXT_VERSION \
- "http://ftp.gnu.org/pub/gnu/gettext/gettext-$REQUIRED_GETTEXT_VERSION.tar.gz" || DIE=1
- require_m4macro gettext.m4
-fi
-
if $want_glib_gettext; then
version_check glib-gettext GLIB_GETTEXTIZE glib-gettextize $REQUIRED_GLIB_GETTEXT_VERSION \
- "ftp://ftp.gtk.org/pub/gtk/v2.2/glib-$REQUIRED_GLIB_GETTEXT_VERSION.tar.gz" || DIE=1
+ "ftp://ftp.gtk.org/pub/gtk/v2.2/glib-$REQUIRED_GLIB_GETTEXT_VERSION.tar.gz"
require_m4macro glib-gettext.m4
fi
if $want_intltool; then
version_check intltool INTLTOOLIZE intltoolize $REQUIRED_INTLTOOL_VERSION \
- "http://ftp.gnome.org/pub/GNOME/sources/intltool/" || DIE=1
+ "http://ftp.gnome.org/pub/GNOME/sources/intltool/"
require_m4macro intltool.m4
fi
if $want_pkg_config; then
version_check pkg-config PKG_CONFIG pkg-config $REQUIRED_PKG_CONFIG_VERSION \
- "'http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-$REQUIRED_PKG_CONFIG_VERSION.tar.gz" || DIE=1
+ "'http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-$REQUIRED_PKG_CONFIG_VERSION.tar.gz"
require_m4macro pkg.m4
fi
if $want_gtk_doc; then
version_check gtk-doc GTKDOCIZE gtkdocize $REQUIRED_GTK_DOC_VERSION \
- "http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/" || DIE=1
+ "http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/"
require_m4macro gtk-doc.m4
fi
if $want_gnome_doc_utils; then
version_check gnome-doc-utils GNOME_DOC_PREPARE gnome-doc-prepare $REQUIRED_GNOME_DOC_UTILS_VERSION \
- "http://ftp.gnome.org/pub/GNOME/sources/gnome-doc-utils/" || DIE=1
+ "http://ftp.gnome.org/pub/GNOME/sources/gnome-doc-utils/"
fi
if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
version_check gnome-common DOC_COMMON gnome-doc-common \
- $REQUIRED_DOC_COMMON_VERSION " " || DIE=1
+ $REQUIRED_DOC_COMMON_VERSION " "
fi
-check_m4macros || DIE=1
+check_m4macros
-if [ "$DIE" -eq 1 ]; then
- exit 1
-fi
-
-if [ "$#" = 0 ]; then
+if [ "$#" = 0 -a "x$NOCONFIGURE" = "x" ]; then
printerr "**Warning**: I am going to run \`configure' with no arguments."
printerr "If you wish to pass any to it, please specify them on the"
printerr \`$0\'" command line."
printbold "Processing $configure_ac"
cd $dirname
- # Note that the order these tools are called should match what
- # autoconf's "autoupdate" package does. See bug 138584 for
- # details.
-
- # programs that might install new macros get run before aclocal
- if grep "^A[CM]_PROG_LIBTOOL" $basename >/dev/null ||
- grep "^LT_INIT" $basename >/dev/null; then
- printbold "Running $LIBTOOLIZE..."
- $LIBTOOLIZE --force --copy || exit 1
- fi
-
- if grep "^AM_GLIB_GNU_GETTEXT" $basename >/dev/null; then
- printbold "Running $GLIB_GETTEXTIZE... Ignore non-fatal messages."
- echo "no" | $GLIB_GETTEXTIZE --force --copy || exit 1
- elif grep "^AM_GNU_GETTEXT" $basename >/dev/null; then
- if grep "^AM_GNU_GETTEXT_VERSION" $basename > /dev/null; then
- printbold "Running autopoint..."
- autopoint --force || exit 1
- else
- printbold "Running $GETTEXTIZE... Ignore non-fatal messages."
- echo "no" | $GETTEXTIZE --force --copy || exit 1
- fi
+ # if the AC_CONFIG_MACRO_DIR() macro is used, create that directory
+ # This is a automake bug fixed in automake 1.13.2
+ # See http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13514
+ m4dir=`autoconf --trace 'AC_CONFIG_MACRO_DIR:$1'`
+ if [ -n "$m4dir" ]; then
+ mkdir -p $m4dir
fi
- if grep "^AC_PROG_INTLTOOL" $basename >/dev/null ||
- grep "^IT_PROG_INTLTOOL" $basename >/dev/null; then
- printbold "Running $INTLTOOLIZE..."
- $INTLTOOLIZE --force --copy --automake || exit 1
- fi
if grep "^GTK_DOC_CHECK" $basename >/dev/null; then
printbold "Running $GTKDOCIZE..."
$GTKDOCIZE --copy || exit 1
$GNOME_DOC_PREPARE --force --copy || exit 1
fi
- # Now run aclocal to pull in any additional macros needed
+ # Now that all the macros are sorted, run autoreconf ...
+ printbold "Running autoreconf..."
+ autoreconf --verbose --force --install -Wno-portability || exit 1
- # if the AC_CONFIG_MACRO_DIR() macro is used, pass that
- # directory to aclocal.
- m4dir=`cat "$basename" | grep '^AC_CONFIG_MACRO_DIR' | sed -n -e 's/AC_CONFIG_MACRO_DIR(\([^()]*\))/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q`
- if [ -n "$m4dir" ]; then
- m4dir="-I $m4dir"
- fi
- printbold "Running $ACLOCAL..."
- $ACLOCAL $m4dir $ACLOCAL_FLAGS || exit 1
-
- if grep "GNOME_AUTOGEN_OBSOLETE" aclocal.m4 >/dev/null; then
- printerr "*** obsolete gnome macros were used in $configure_ac"
- fi
-
- # Now that all the macros are sorted, run autoconf and autoheader ...
- printbold "Running $AUTOCONF..."
- $AUTOCONF || exit 1
- if grep "^A[CM]_CONFIG_HEADER" $basename >/dev/null; then
- printbold "Running $AUTOHEADER..."
- $AUTOHEADER || exit 1
- # this prevents automake from thinking config.h.in is out of
- # date, since autoheader doesn't touch the file if it doesn't
- # change.
- test -f config.h.in && touch config.h.in
- fi
-
- # Finally, run automake to create the makefiles ...
- printbold "Running $AUTOMAKE..."
- cp -pf COPYING COPYING.autogen_bak
- cp -pf INSTALL INSTALL.autogen_bak
- if [ $REQUIRED_AUTOMAKE_VERSION != 1.4 ]; then
- $AUTOMAKE --gnu --add-missing --force --copy || exit 1
- else
- $AUTOMAKE --gnu --add-missing --copy || exit 1
+ if grep "^AC_PROG_INTLTOOL" $basename >/dev/null ||
+ grep "^IT_PROG_INTLTOOL" $basename >/dev/null; then
+ printbold "Running $INTLTOOLIZE..."
+ $INTLTOOLIZE --force --copy --automake || exit 1
fi
- cmp COPYING COPYING.autogen_bak || cp -pf COPYING.autogen_bak COPYING
- cmp INSTALL INSTALL.autogen_bak || cp -pf INSTALL.autogen_bak INSTALL
- rm -f COPYING.autogen_bak INSTALL.autogen_bak
cd "$topdir"
fi
done
-conf_flags="--enable-maintainer-mode"
+conf_flags=""
+
+if $want_maintainer_mode; then
+ conf_flags="--enable-maintainer-mode"
+fi
if test x$NOCONFIGURE = x; then
printbold Running $srcdir/configure $conf_flags "$@" ...