/* vi: set sw=4 ts=4: */
-/* agetty.c - another getty program for Linux. By W. Z. Venema 1989
- Ported to Linux by Peter Orbaek <poe@daimi.aau.dk>
- This program is freely distributable. The entire man-page used to
- be here. Now read the real man-page agetty.8 instead.
-
- -f option added by Eric Rasmussen <ear@usfirst.org> - 12/28/95
-
- 1999-02-22 Arkadiusz Mi¶kiewicz <misiek@misiek.eu.org>
- - added Native Language Support
-
- 1999-05-05 Thorsten Kranzkowski <dl8bcu@gmx.net>
- - enable hardware flow control before displaying /etc/issue
-
-*/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <sys/ioctl.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <sys/signal.h>
-#include <fcntl.h>
-#include <stdarg.h>
-#include <ctype.h>
-#include <getopt.h>
-#include <termios.h>
-#include "busybox.h"
-
-#ifdef CONFIG_FEATURE_UTMP
-#include <utmp.h>
-#endif
-
-#define _PATH_LOGIN "/bin/login"
+/*
+ * Based on agetty - another getty program for Linux. By W. Z. Venema 1989
+ * Ported to Linux by Peter Orbaek <poe@daimi.aau.dk>
+ * This program is freely distributable.
+ *
+ * option added by Eric Rasmussen <ear@usfirst.org> - 12/28/95
+ *
+ * 1999-02-22 Arkadiusz Mickiewicz <misiek@misiek.eu.org>
+ * - Added Native Language Support
+ *
+ * 1999-05-05 Thorsten Kranzkowski <dl8bcu@gmx.net>
+ * - Enabled hardware flow control before displaying /etc/issue
+ *
+ * 2011-01 Venys Vlasenko
+ * - Removed parity detection code. It can't work reliably:
+ * if all chars received have bit 7 cleared and odd (or even) parity,
+ * it is impossible to determine whether other side is 8-bit,no-parity
+ * or 7-bit,odd(even)-parity. It also interferes with non-ASCII usernames.
+ * - From now on, we assume that parity is correctly set.
+ *
+ * Licensed under GPLv2 or later, see file LICENSE in this source tree.
+ */
- /* If USE_SYSLOG is undefined all diagnostics go directly to /dev/console. */
-#ifdef CONFIG_SYSLOGD
-#include <sys/param.h>
+#include "libbb.h"
#include <syslog.h>
+#ifndef IUCLC
+# define IUCLC 0
#endif
+#ifndef LOGIN_PROCESS
+# undef ENABLE_FEATURE_UTMP
+# undef ENABLE_FEATURE_WTMP
+# define ENABLE_FEATURE_UTMP 0
+# define ENABLE_FEATURE_WTMP 0
+#endif
- /*
- * Some heuristics to find out what environment we are in: if it is not
- * System V, assume it is SunOS 4.
- */
-#ifdef LOGIN_PROCESS /* defined in System V utmp.h */
-#define SYSV_STYLE /* select System V style getty */
-#ifdef CONFIG_FEATURE_WTMP
-extern void updwtmp(const char *filename, const struct utmp *ut);
-#endif
-#endif /* LOGIN_PROCESS */
-
- /*
- * Things you may want to modify.
- *
- * You may disagree with the default line-editing etc. characters defined
- * below. Note, however, that DEL cannot be used for interrupt generation
- * and for line editing at the same time.
- */
-
-#ifdef SYSV_STYLE
-#include <sys/utsname.h>
-#include <time.h>
+/* The following is used for understandable diagnostics */
+#ifdef DEBUGGING
+static FILE *dbf;
+# define DEBUGTERM "/dev/ttyp0"
+# define debug(...) do { fprintf(dbf, __VA_ARGS__); fflush(dbf); } while (0)
+#else
+# define debug(...) ((void)0)
#endif
- /* If ISSUE is not defined, agetty will never display the contents of the
- * /etc/issue file. You will not want to spit out large "issue" files at the
- * wrong baud rate.
- */
-#define ISSUE "/etc/issue" /* displayed before the login prompt */
-/* Some shorthands for control characters. */
+/*
+ * Things you may want to modify.
+ *
+ * You may disagree with the default line-editing etc. characters defined
+ * below. Note, however, that DEL cannot be used for interrupt generation
+ * and for line editing at the same time.
+ */
+#undef _PATH_LOGIN
+#define _PATH_LOGIN "/bin/login"
+
+/* Displayed before the login prompt.
+ * If ISSUE is not defined, getty will never display the contents of the
+ * /etc/issue file. You will not want to spit out large "issue" files at the
+ * wrong baud rate.
+ */
+#define ISSUE "/etc/issue"
-#define CTL(x) (x ^ 0100) /* Assumes ASCII dialect */
-#define CR CTL('M') /* carriage return */
-#define NL CTL('J') /* line feed */
+/* Some shorthands for control characters */
+#define CTL(x) ((x) ^ 0100) /* Assumes ASCII dialect */
#define BS CTL('H') /* back space */
#define DEL CTL('?') /* delete */
-/* Defaults for line-editing etc. characters; you may want to change this. */
-
-#define DEF_ERASE DEL /* default erase character */
+/* Defaults for line-editing etc. characters; you may want to change this */
#define DEF_INTR CTL('C') /* default interrupt character */
#define DEF_QUIT CTL('\\') /* default quit char */
#define DEF_KILL CTL('U') /* default kill char */
#define DEF_EOF CTL('D') /* default EOF char */
#define DEF_EOL '\n'
-#define DEF_SWITCH 0 /* default switch char */
-
- /*
- * SunOS 4.1.1 termio is broken. We must use the termios stuff instead,
- * because the termio -> termios translation does not clear the termios
- * CIBAUD bits. Therefore, the tty driver would sometimes report that input
- * baud rate != output baud rate. I did not notice that problem with SunOS
- * 4.1. We will use termios where available, and termio otherwise.
- */
-
-/* linux 0.12 termio is broken too, if we use it c_cc[VERASE] isn't set
- properly, but all is well if we use termios?! */
-
-#ifdef TCGETS
-#undef TCGETA
-#undef TCSETA
-#undef TCSETAW
-#define termio termios
-#define TCGETA TCGETS
-#define TCSETA TCSETS
-#define TCSETAW TCSETSW
-#endif
-
- /*
- * When multiple baud rates are specified on the command line, the first one
- * we will try is the first one specified.
- */
-
-#define FIRST_SPEED 0
-
-/* Storage for command-line options. */
+#define DEF_SWITCH 0 /* default switch char (none) */
+/*
+ * When multiple baud rates are specified on the command line,
+ * the first one we will try is the first one specified.
+ */
#define MAX_SPEED 10 /* max. nr. of baud rates */
-struct options {
- int flags; /* toggle switches, see below */
- int timeout; /* time-out period */
- char *login; /* login program */
- char *tty; /* name of tty */
- char *initstring; /* modem init string */
- char *issue; /* alternative issue file */
+struct globals {
+ unsigned timeout; /* time-out period */
+ const char *login; /* login program */
+ const char *fakehost;
+ const char *tty; /* name of tty */
+ const char *initstring; /* modem init string */
+ const char *issue; /* alternative issue file */
int numspeed; /* number of baud rates to try */
int speeds[MAX_SPEED]; /* baud rates to be tried */
+ unsigned char eol; /* end-of-line char seen (CR or NL) */
+ struct termios termios; /* terminal mode bits */
+ char line_buf[128];
};
-static const char opt_string[] = "I:LH:f:hil:mt:wn";
-#define F_INITSTRING (1<<0) /* initstring is set */
-#define F_LOCAL (1<<1) /* force local */
-#define F_FAKEHOST (1<<2) /* force fakehost */
-#define F_CUSTISSUE (1<<3) /* give alternative issue file */
-#define F_RTSCTS (1<<4) /* enable RTS/CTS flow control */
-#define F_ISSUE (1<<5) /* display /etc/issue */
-#define F_LOGIN (1<<6) /* non-default login program */
-#define F_PARSE (1<<7) /* process modem status messages */
-#define F_TIMEOUT (1<<8) /* time out */
-#define F_WAITCRLF (1<<9) /* wait for CR or LF */
-#define F_NOPROMPT (1<<10) /* don't ask for login name! */
-
-/* Storage for things detected while the login name was read. */
-
-struct chardata {
- int erase; /* erase character */
- int kill; /* kill character */
- int eol; /* end-of-line character */
- int parity; /* what parity did we see */
- int capslock; /* upper case without lower case */
-};
-
-/* Initial values for the above. */
-
-static struct chardata init_chardata = {
- DEF_ERASE, /* default erase character */
- DEF_KILL, /* default kill character */
- 13, /* default eol char */
- 0, /* space parity */
- 0, /* no capslock */
-};
-
-#if 0
-struct Speedtab {
- long speed;
- int code;
-};
-
-static struct Speedtab speedtab[] = {
- {50, B50},
- {75, B75},
- {110, B110},
- {134, B134},
- {150, B150},
- {200, B200},
- {300, B300},
- {600, B600},
- {1200, B1200},
- {1800, B1800},
- {2400, B2400},
- {4800, B4800},
- {9600, B9600},
-#ifdef B19200
- {19200, B19200},
-#endif
-#ifdef B38400
- {38400, B38400},
-#endif
-#ifdef EXTA
- {19200, EXTA},
-#endif
-#ifdef EXTB
- {38400, EXTB},
-#endif
-#ifdef B57600
- {57600, B57600},
-#endif
-#ifdef B115200
- {115200, B115200},
-#endif
-#ifdef B230400
- {230400, B230400},
-#endif
- {0, 0},
-};
-#endif
-
-static void parse_args(int argc, char **argv, struct options *op);
-static void parse_speeds(struct options *op, char *arg);
-static void open_tty(char *tty, struct termio *tp, int local);
-static void termio_init(struct termio *tp, int speed, struct options *op);
-static void auto_baud(struct termio *tp);
-static void do_prompt(struct options *op, struct termio *tp);
-static void next_speed(struct termio *tp, struct options *op);
-static char *get_logname(struct options *op, struct chardata *cp,
- struct termio *tp);
-static void termio_final(struct options *op, struct termio *tp,
- struct chardata *cp);
-static int caps_lock(const char *s);
-static int bcode(const char *s);
-static void error(const char *fmt, ...) __attribute__ ((noreturn));
-
-#ifdef SYSV_STYLE
-#ifdef CONFIG_FEATURE_UTMP
-static void update_utmp(char *line);
-#endif
-#endif
-
-/* The following is used for understandable diagnostics. */
-
-/* Fake hostname for ut_host specified on command line. */
-static char *fakehost = NULL;
-
-/* ... */
-#ifdef DEBUGGING
-#define debug(s) fprintf(dbf,s); fflush(dbf)
-#define DEBUGTERM "/dev/ttyp0"
-FILE *dbf;
-#else
-#define debug(s) /* nothing */
-#endif
-
-int getty_main(int argc, char **argv)
-{
- char *logname = NULL; /* login name, given to /bin/login */
- struct chardata chardata; /* set by get_logname() */
- struct termio termio; /* terminal mode bits */
- static struct options options = {
- 0, /* show /etc/issue (SYSV_STYLE) */
- 0, /* no timeout */
- _PATH_LOGIN, /* default login program */
- "tty1", /* default tty line */
- "", /* modem init string */
-#ifdef ISSUE
- ISSUE, /* default issue file */
-#else
- NULL,
-#endif
- 0, /* no baud rates known yet */
- };
-
-#ifdef DEBUGGING
- dbf = bb_xfopen(DEBUGTERM, "w");
-
- {
- int i;
-
- for (i = 1; i < argc; i++) {
- debug(argv[i]);
- debug("\n");
- }
- }
-#endif
-
- /* Parse command-line arguments. */
-
- parse_args(argc, argv, &options);
-
-#ifdef __linux__
- setsid();
-#endif
-
- /* Update the utmp file. */
-
-
-#ifdef SYSV_STYLE
-#ifdef CONFIG_FEATURE_UTMP
- update_utmp(options.tty);
-#endif
-#endif
-
- debug("calling open_tty\n");
- /* Open the tty as standard { input, output, error }. */
- open_tty(options.tty, &termio, options.flags & F_LOCAL);
-
-#ifdef __linux__
- {
- int iv;
-
- iv = getpid();
- ioctl(0, TIOCSPGRP, &iv);
- }
-#endif
- /* Initialize the termio settings (raw mode, eight-bit, blocking i/o). */
- debug("calling termio_init\n");
- termio_init(&termio, options.speeds[FIRST_SPEED], &options);
-
- /* write the modem init string and DON'T flush the buffers */
- if (options.flags & F_INITSTRING) {
- debug("writing init string\n");
- write(1, options.initstring, strlen(options.initstring));
- }
-
- if (!(options.flags & F_LOCAL)) {
- /* go to blocking write mode unless -L is specified */
- fcntl(1, F_SETFL, fcntl(1, F_GETFL, 0) & ~O_NONBLOCK);
- }
-
- /* Optionally detect the baud rate from the modem status message. */
- debug("before autobaud\n");
- if (options.flags & F_PARSE)
- auto_baud(&termio);
-
- /* Set the optional timer. */
- if (options.timeout)
- (void) alarm((unsigned) options.timeout);
-
- /* optionally wait for CR or LF before writing /etc/issue */
- if (options.flags & F_WAITCRLF) {
- char ch;
-
- debug("waiting for cr-lf\n");
- while (read(0, &ch, 1) == 1) {
- ch &= 0x7f; /* strip "parity bit" */
-#ifdef DEBUGGING
- fprintf(dbf, "read %c\n", ch);
-#endif
- if (ch == '\n' || ch == '\r')
- break;
- }
- }
-
- chardata = init_chardata;
- if (!(options.flags & F_NOPROMPT)) {
- /* Read the login name. */
- debug("reading login name\n");
- /* while ((logname = get_logname(&options, &chardata, &termio)) == 0) */
- while ((logname = get_logname(&options, &chardata, &termio)) ==
- NULL) next_speed(&termio, &options);
- }
-
- /* Disable timer. */
-
- if (options.timeout)
- (void) alarm(0);
-
- /* Finalize the termio settings. */
-
- termio_final(&options, &termio, &chardata);
-
- /* Now the newline character should be properly written. */
-
- (void) write(1, "\n", 1);
-
- /* Let the login program take care of password validation. */
-
- (void) execl(options.login, options.login, "--", logname, (char *) 0);
- error("%s: can't exec %s: %m", options.tty, options.login);
-}
-
-/* parse-args - parse command-line arguments */
-
-static void parse_args(int argc, char **argv, struct options *op)
+#define G (*ptr_to_globals)
+#define INIT_G() do { \
+ SET_PTR_TO_GLOBALS(xzalloc(sizeof(G))); \
+} while (0)
+
+//usage:#define getty_trivial_usage
+//usage: "[OPTIONS] BAUD_RATE[,BAUD_RATE]... TTY [TERMTYPE]"
+//usage:#define getty_full_usage "\n\n"
+//usage: "Open a tty, prompt for a login name, then invoke /bin/login\n"
+//usage: "\nOptions:"
+//usage: "\n -h Enable hardware RTS/CTS flow control"
+//usage: "\n -L Set CLOCAL (ignore Carrier Detect state)"
+//usage: "\n -m Get baud rate from modem's CONNECT status message"
+//usage: "\n -n Don't prompt for login name"
+//usage: "\n -w Wait for CR or LF before sending /etc/issue"
+//usage: "\n -i Don't display /etc/issue"
+//usage: "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue"
+//usage: "\n -l LOGIN Invoke LOGIN instead of /bin/login"
+//usage: "\n -t SEC Terminate after SEC if no login name is read"
+//usage: "\n -I INITSTR Send INITSTR before anything else"
+//usage: "\n -H HOST Log HOST into the utmp file as the hostname"
+//usage: "\n"
+//usage: "\nBAUD_RATE of 0 leaves it unchanged"
+
+static const char opt_string[] ALIGN1 = "I:LH:f:hil:mt:wn";
+#define F_INITSTRING (1 << 0) /* -I */
+#define F_LOCAL (1 << 1) /* -L */
+#define F_FAKEHOST (1 << 2) /* -H */
+#define F_CUSTISSUE (1 << 3) /* -f */
+#define F_RTSCTS (1 << 4) /* -h */
+#define F_NOISSUE (1 << 5) /* -i */
+#define F_LOGIN (1 << 6) /* -l */
+#define F_PARSE (1 << 7) /* -m */
+#define F_TIMEOUT (1 << 8) /* -t */
+#define F_WAITCRLF (1 << 9) /* -w */
+#define F_NOPROMPT (1 << 10) /* -n */
+
+
+/* convert speed string to speed code; return <= 0 on failure */
+static int bcode(const char *s)
{
- char *ts;
-
- op->flags = bb_getopt_ulflags(argc, argv, opt_string,
- &(op->initstring), &fakehost, &(op->issue),
- &(op->login), &ts);
- if(op->flags & F_INITSTRING) {
- const char *p = op->initstring;
- char *q;
-
- q = op->initstring = bb_xstrdup(op->initstring);
- /* copy optarg into op->initstring decoding \ddd
- octal codes into chars */
- while (*p) {
- if (*p == '\\') {
- p++;
- *q++ = bb_process_escape_sequence(&p);
- } else {
- *q++ = *p++;
- }
- }
- *q = '\0';
- }
- op->flags ^= F_ISSUE; /* revert flag show /etc/issue */
- if(op->flags & F_TIMEOUT) {
- if ((op->timeout = atoi(ts)) <= 0)
- error("bad timeout value: %s", ts);
- }
- debug("after getopt loop\n");
- if (argc < optind + 2) /* check parameter count */
- bb_show_usage();
-
- /* we loosen up a bit and accept both "baudrate tty" and "tty baudrate" */
- if ('0' <= argv[optind][0] && argv[optind][0] <= '9') {
- /* a number first, assume it's a speed (BSD style) */
- parse_speeds(op, argv[optind++]); /* baud rate(s) */
- op->tty = argv[optind]; /* tty name */
- } else {
- op->tty = argv[optind++]; /* tty name */
- parse_speeds(op, argv[optind]); /* baud rate(s) */
- }
-
- optind++;
- if (argc > optind && argv[optind])
- setenv("TERM", argv[optind], 1);
-
- debug("exiting parseargs\n");
+ int value = bb_strtou(s, NULL, 10); /* yes, int is intended! */
+ if (value < 0) /* bad terminating char, overflow, etc */
+ return value;
+ return tty_value_to_baud(value);
}
-/* parse_speeds - parse alternate baud rates */
-
-static void parse_speeds(struct options *op, char *arg)
+/* parse alternate baud rates */
+static void parse_speeds(char *arg)
{
char *cp;
+ /* NB: at least one iteration is always done */
debug("entered parse_speeds\n");
- for (cp = strtok(arg, ","); cp != 0; cp = strtok((char *) 0, ",")) {
- if ((op->speeds[op->numspeed++] = bcode(cp)) <= 0)
- error("bad speed: %s", cp);
- if (op->numspeed > MAX_SPEED)
- error("too many alternate speeds");
+ while ((cp = strsep(&arg, ",")) != NULL) {
+ G.speeds[G.numspeed] = bcode(cp);
+ if (G.speeds[G.numspeed] < 0)
+ bb_error_msg_and_die("bad speed: %s", cp);
+ /* note: arg "0" turns into speed B0 */
+ G.numspeed++;
+ if (G.numspeed > MAX_SPEED)
+ bb_error_msg_and_die("too many alternate speeds");
}
- debug("exiting parsespeeds\n");
+ debug("exiting parse_speeds\n");
}
-#ifdef SYSV_STYLE
-#ifdef CONFIG_FEATURE_UTMP
-
-/* update_utmp - update our utmp entry */
-static void update_utmp(char *line)
+/* parse command-line arguments */
+static void parse_args(char **argv)
{
- struct utmp ut;
- struct utmp *utp;
- time_t t;
- int mypid = getpid();
-#if ! (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1))
- struct flock lock;
-#endif
-
- /*
- * The utmp file holds miscellaneous information about things started by
- * /sbin/init and other system-related events. Our purpose is to update
- * the utmp entry for the current process, in particular the process type
- * and the tty line we are listening to. Return successfully only if the
- * utmp file can be opened for update, and if we are able to find our
- * entry in the utmp file.
- */
- if (access(_PATH_UTMP, R_OK|W_OK) == -1) {
- close(creat(_PATH_UTMP, 0664));
+ char *ts;
+ int flags;
+
+ opt_complementary = "-2:t+"; /* at least 2 args; -t N */
+ flags = getopt32(argv, opt_string,
+ &G.initstring, &G.fakehost, &G.issue,
+ &G.login, &G.timeout
+ );
+ if (flags & F_INITSTRING) {
+ G.initstring = xstrdup(G.initstring);
+ /* decode \ddd octal codes into chars */
+ strcpy_and_process_escape_sequences((char*)G.initstring, G.initstring);
}
- utmpname(_PATH_UTMP);
- setutent();
- while ((utp = getutent())
- && !(utp->ut_type == INIT_PROCESS && utp->ut_pid == mypid)) /* nothing */
- ;
-
- if (utp) {
- memcpy(&ut, utp, sizeof(ut));
- } else {
- /* some inits don't initialize utmp... */
- memset(&ut, 0, sizeof(ut));
- strncpy(ut.ut_id, line + 3, sizeof(ut.ut_id));
+ argv += optind;
+ debug("after getopt\n");
+
+ /* We loosen up a bit and accept both "baudrate tty" and "tty baudrate" */
+ G.tty = argv[0]; /* tty name */
+ ts = argv[1]; /* baud rate(s) */
+ if (isdigit(argv[0][0])) {
+ /* A number first, assume it's a speed (BSD style) */
+ G.tty = ts; /* tty name is in argv[1] */
+ ts = argv[0]; /* baud rate(s) */
}
- /*endutent(); */
-
- strncpy(ut.ut_user, "LOGIN", sizeof(ut.ut_user));
- strncpy(ut.ut_line, line, sizeof(ut.ut_line));
- if (fakehost)
- strncpy(ut.ut_host, fakehost, sizeof(ut.ut_host));
- time(&t);
- ut.ut_time = t;
- ut.ut_type = LOGIN_PROCESS;
- ut.ut_pid = mypid;
-
- pututline(&ut);
- endutent();
-
-#ifdef CONFIG_FEATURE_WTMP
- if (access(_PATH_WTMP, R_OK|W_OK) == -1)
- close(creat(_PATH_WTMP, 0664));
- updwtmp(_PATH_WTMP, &ut);
-#endif
-}
-
-#endif /* CONFIG_FEATURE_UTMP */
-#endif /* SYSV_STYLE */
-
-/* open_tty - set up tty as standard { input, output, error } */
-static void open_tty(char *tty, struct termio *tp, int local)
-{
- int chdir_to_root = 0;
-
- /* Set up new standard input, unless we are given an already opened port. */
+ parse_speeds(ts);
+ applet_name = xasprintf("getty: %s", G.tty);
- if (strcmp(tty, "-")) {
- struct stat st;
- int fd;
+ if (argv[2])
+ xsetenv("TERM", argv[2]);
- /* Sanity checks... */
-
- if (chdir("/dev"))
- error("/dev: chdir() failed: %m");
- chdir_to_root = 1;
- if (stat(tty, &st) < 0)
- error("/dev/%s: %m", tty);
- if ((st.st_mode & S_IFMT) != S_IFCHR)
- error("/dev/%s: not a character device", tty);
+ debug("exiting parse_args\n");
+}
- /* Open the tty as standard input. */
+/* set up tty as standard input, output, error */
+static void open_tty(void)
+{
+ /* Set up new standard input, unless we are given an already opened port */
+ if (NOT_LONE_DASH(G.tty)) {
+ if (G.tty[0] != '/')
+ G.tty = xasprintf("/dev/%s", G.tty); /* will leak it */
+ /* Open the tty as standard input */
debug("open(2)\n");
- fd = open(tty, O_RDWR | O_NONBLOCK, 0);
- if (dup2(fd, STDIN_FILENO) == -1)
- error("/dev/%s: cannot open as standard input: %m", tty);
- close(fd);
+ close(0);
+ xopen(G.tty, O_RDWR | O_NONBLOCK); /* uses fd 0 */
+ /* Set proper protections and ownership */
+ fchown(0, 0, 0); /* 0:0 */
+ fchmod(0, 0620); /* crw--w---- */
} else {
-
/*
* Standard input should already be connected to an open port. Make
* sure it is open for read/write.
*/
-
- if ((fcntl(0, F_GETFL, 0) & O_RDWR) != O_RDWR)
- error("%s: not open for read/write", tty);
+ if ((fcntl(0, F_GETFL) & (O_RDWR|O_RDONLY|O_WRONLY)) != O_RDWR)
+ bb_error_msg_and_die("stdin is not open for read/write");
}
+}
- /* Replace current standard output/error fd's with new ones */
- debug("duping\n");
- if (dup2(STDIN_FILENO, STDOUT_FILENO) == -1 ||
- dup2(STDIN_FILENO, STDERR_FILENO) == -1)
- error("%s: dup problem: %m", tty); /* we have a problem */
+static void set_termios(void)
+{
+ if (tcsetattr_stdin_TCSANOW(&G.termios) < 0)
+ bb_perror_msg_and_die("tcsetattr");
+}
- /*
- * The following ioctl will fail if stdin is not a tty, but also when
- * there is noise on the modem control lines. In the latter case, the
- * common course of action is (1) fix your cables (2) give the modem more
- * time to properly reset after hanging up. SunOS users can achieve (2)
- * by patching the SunOS kernel variable "zsadtrlow" to a larger value;
- * 5 seconds seems to be a good value.
+/* We manipulate termios this way:
+ * - first, we read existing termios settings
+ * - termios_init modifies some parts and sets it
+ * - auto_baud and/or BREAK processing can set different speed and set termios
+ * - termios_final again modifies some parts and sets termios before
+ * execing login
+ */
+static void termios_init(int speed)
+{
+ /* Try to drain output buffer, with 5 sec timeout.
+ * Added on request from users of ~600 baud serial interface
+ * with biggish buffer on a 90MHz CPU.
+ * They were losing hundreds of bytes of buffered output
+ * on tcflush.
*/
+ signal_no_SA_RESTART_empty_mask(SIGALRM, record_signo);
+ alarm(5);
+ tcdrain(STDIN_FILENO);
+ alarm(0);
+ signal(SIGALRM, SIG_DFL); /* do not break -t TIMEOUT! */
- if (ioctl(0, TCGETA, tp) < 0)
- error("%s: ioctl: %m", tty);
+ /* Flush input and output queues, important for modems! */
+ tcflush(STDIN_FILENO, TCIOFLUSH);
- /*
- * It seems to be a terminal. Set proper protections and ownership. Mode
- * 0622 is suitable for SYSV <4 because /bin/login does not change
- * protections. SunOS 4 login will change the protections to 0620 (write
- * access for group tty) after the login has succeeded.
- */
+ /* Set speed if it wasn't specified as "0" on command line */
+ if (speed != B0)
+ cfsetspeed(&G.termios, speed);
-#ifdef DEBIAN
- {
- /* tty to root.dialout 660 */
- struct group *gr;
- int id;
-
- id = (gr = getgrnam("dialout")) ? gr->gr_gid : 0;
- chown(tty, 0, id);
- chmod(tty, 0660);
-
- /* vcs,vcsa to root.sys 600 */
- if (!strncmp(tty, "tty", 3) && isdigit(tty[3])) {
- char *vcs, *vcsa;
-
- if (!(vcs = strdup(tty)))
- error("Can't malloc for vcs");
- if (!(vcsa = malloc(strlen(tty) + 2)))
- error("Can't malloc for vcsa");
- strcpy(vcs, "vcs");
- strcpy(vcs + 3, tty + 3);
- strcpy(vcsa, "vcsa");
- strcpy(vcsa + 4, tty + 3);
-
- id = (gr = getgrnam("sys")) ? gr->gr_gid : 0;
- chown(vcs, 0, id);
- chmod(vcs, 0600);
- chown(vcsa, 0, id);
- chmod(vcs, 0600);
-
- free(vcs);
- free(vcsa);
- }
+ /* Initial termios settings: 8-bit characters, raw mode, blocking i/o.
+ * Special characters are set after we have read the login name; all
+ * reads will be done in raw mode anyway.
+ */
+ /* Clear all bits except: */
+ G.termios.c_cflag &= (0
+ /* 2 stop bits (1 otherwise)
+ * Enable parity bit (both on input and output)
+ * Odd parity (else even)
+ */
+ | CSTOPB | PARENB | PARODD
+#ifdef CMSPAR
+ | CMSPAR /* mark or space parity */
+#endif
+ | CBAUD /* (output) baud rate */
+#ifdef CBAUDEX
+ | CBAUDEX /* (output) baud rate */
+#endif
+#ifdef CIBAUD
+ | CIBAUD /* input baud rate */
+#endif
+ );
+ /* Set: 8 bits; hang up (drop DTR) on last close; enable receive */
+ G.termios.c_cflag |= CS8 | HUPCL | CREAD;
+ if (option_mask32 & F_LOCAL) {
+ /* ignore Carrier Detect pin:
+ * opens don't block when CD is low,
+ * losing CD doesn't hang up processes whose ctty is this tty
+ */
+ G.termios.c_cflag |= CLOCAL;
}
-#else
- (void) chown(tty, 0, 0); /* root, sys */
- (void) chmod(tty, 0622); /* crw--w--w- */
+#ifdef CRTSCTS
+ if (option_mask32 & F_RTSCTS)
+ G.termios.c_cflag |= CRTSCTS; /* flow control using RTS/CTS pins */
#endif
- if(chdir_to_root && chdir("/"))
- error("chdir to / failed: %m");
-}
-
-/* termio_init - initialize termio settings */
+ G.termios.c_iflag = 0;
+ G.termios.c_lflag = 0;
+ /* non-raw output; add CR to each NL */
+ G.termios.c_oflag = OPOST | ONLCR;
-static void termio_init(struct termio *tp, int speed, struct options *op)
-{
- /*
- * Initial termio settings: 8-bit characters, raw-mode, blocking i/o.
- * Special characters are set after we have read the login name; all
- * reads will be done in raw mode anyway. Errors will be dealt with
- * lateron.
- */
+ G.termios.c_cc[VMIN] = 1; /* block reads if < 1 char is available */
+ G.termios.c_cc[VTIME] = 0; /* no timeout (reads block forever) */
#ifdef __linux__
- /* flush input and output queues, important for modems! */
- (void) ioctl(0, TCFLSH, TCIOFLUSH);
+ G.termios.c_line = 0;
#endif
- tp->c_cflag = CS8 | HUPCL | CREAD | speed;
- if (op->flags & F_LOCAL) {
- tp->c_cflag |= CLOCAL;
- }
-
- tp->c_iflag = tp->c_lflag = tp->c_oflag = tp->c_line = 0;
- tp->c_cc[VMIN] = 1;
- tp->c_cc[VTIME] = 0;
+ set_termios();
- /* Optionally enable hardware flow control */
+ debug("term_io 2\n");
+}
-#ifdef CRTSCTS
- if (op->flags & F_RTSCTS)
- tp->c_cflag |= CRTSCTS;
-#endif
+static void termios_final(void)
+{
+ /* software flow control on output (stop sending if XOFF is recvd);
+ * and on input (send XOFF when buffer is full)
+ */
+ G.termios.c_iflag |= IXON | IXOFF;
+ if (G.eol == '\r') {
+ G.termios.c_iflag |= ICRNL; /* map CR on input to NL */
+ }
+ /* Other bits in c_iflag:
+ * IXANY Any recvd char enables output (any char is also a XON)
+ * INPCK Enable parity check
+ * IGNPAR Ignore parity errors (drop bad bytes)
+ * PARMRK Mark parity errors with 0xff, 0x00 prefix
+ * (else bad byte is received as 0x00)
+ * ISTRIP Strip parity bit
+ * IGNBRK Ignore break condition
+ * BRKINT Send SIGINT on break - maybe set this?
+ * INLCR Map NL to CR
+ * IGNCR Ignore CR
+ * ICRNL Map CR to NL
+ * IUCLC Map uppercase to lowercase
+ * IMAXBEL Echo BEL on input line too long
+ * IUTF8 Appears to affect tty's idea of char widths,
+ * observed to improve backspacing through Unicode chars
+ */
- (void) ioctl(0, TCSETA, tp);
+ /* line buffered input (NL or EOL or EOF chars end a line);
+ * recognize INT/QUIT/SUSP chars;
+ * echo input chars;
+ * echo BS-SP-BS on erase character;
+ * echo kill char specially, not as ^c (ECHOKE controls how exactly);
+ * erase all input via BS-SP-BS on kill char (else go to next line)
+ */
+ G.termios.c_lflag |= ICANON | ISIG | ECHO | ECHOE | ECHOK | ECHOKE;
+ /* Other bits in c_lflag:
+ * XCASE Map uppercase to \lowercase [tried, doesn't work]
+ * ECHONL Echo NL even if ECHO is not set
+ * ECHOCTL Echo ctrl chars as ^c (else don't echo) - maybe set this?
+ * ECHOPRT On erase, echo erased chars
+ * [qwe<BS><BS><BS> input looks like "qwe\ewq/" on screen]
+ * NOFLSH Don't flush input buffer after interrupt or quit chars
+ * IEXTEN Enable extended functions (??)
+ * [glibc says it enables c_cc[LNEXT] "enter literal char"
+ * and c_cc[VDISCARD] "toggle discard buffered output" chars]
+ * FLUSHO Output being flushed (c_cc[VDISCARD] is in effect)
+ * PENDIN Retype pending input at next read or input char
+ * (c_cc[VREPRINT] is being processed)
+ * TOSTOP Send SIGTTOU for background output
+ * (why "stty sane" unsets this bit?)
+ */
- /* go to blocking input even in local mode */
- fcntl(0, F_SETFL, fcntl(0, F_GETFL, 0) & ~O_NONBLOCK);
+ G.termios.c_cc[VINTR] = DEF_INTR;
+ G.termios.c_cc[VQUIT] = DEF_QUIT;
+ G.termios.c_cc[VEOF] = DEF_EOF;
+ G.termios.c_cc[VEOL] = DEF_EOL;
+#ifdef VSWTC
+ G.termios.c_cc[VSWTC] = DEF_SWITCH;
+#endif
+#ifdef VSWTCH
+ G.termios.c_cc[VSWTCH] = DEF_SWITCH;
+#endif
+ G.termios.c_cc[VKILL] = DEF_KILL;
+ /* Other control chars:
+ * VEOL2
+ * VERASE, VWERASE - (word) erase. we may set VERASE in get_logname
+ * VREPRINT - reprint current input buffer
+ * VLNEXT, VDISCARD, VSTATUS
+ * VSUSP, VDSUSP - send (delayed) SIGTSTP
+ * VSTART, VSTOP - chars used for IXON/IXOFF
+ */
- debug("term_io 2\n");
+ set_termios();
}
-/* auto_baud - extract baud rate from modem status message */
-static void auto_baud(struct termio *tp)
+/* extract baud rate from modem status message */
+static void auto_baud(void)
{
- int speed;
- int vmin;
- unsigned iflag;
- char buf[BUFSIZ];
- char *bp;
int nread;
/*
* modem status messages is enabled.
*/
- /*
- * Use 7-bit characters, don't block if input queue is empty. Errors will
- * be dealt with lateron.
- */
-
- iflag = tp->c_iflag;
- tp->c_iflag |= ISTRIP; /* enable 8th-bit stripping */
- vmin = tp->c_cc[VMIN];
- tp->c_cc[VMIN] = 0; /* don't block if queue empty */
- (void) ioctl(0, TCSETA, tp);
+ G.termios.c_cc[VMIN] = 0; /* don't block reads (min read is 0 chars) */
+ set_termios();
/*
* Wait for a while, then read everything the modem has said so far and
* try to extract the speed of the dial-in call.
*/
-
- (void) sleep(1);
- if ((nread = read(0, buf, sizeof(buf) - 1)) > 0) {
- buf[nread] = '\0';
- for (bp = buf; bp < buf + nread; bp++) {
- if (isascii(*bp) && isdigit(*bp)) {
- if ((speed = bcode(bp))) {
- tp->c_cflag &= ~CBAUD;
- tp->c_cflag |= speed;
- }
+ sleep(1);
+ nread = safe_read(STDIN_FILENO, G.line_buf, sizeof(G.line_buf) - 1);
+ if (nread > 0) {
+ int speed;
+ char *bp;
+ G.line_buf[nread] = '\0';
+ for (bp = G.line_buf; bp < G.line_buf + nread; bp++) {
+ if (isdigit(*bp)) {
+ speed = bcode(bp);
+ if (speed > 0)
+ cfsetspeed(&G.termios, speed);
break;
}
}
}
- /* Restore terminal settings. Errors will be dealt with lateron. */
-
- tp->c_iflag = iflag;
- tp->c_cc[VMIN] = vmin;
- (void) ioctl(0, TCSETA, tp);
-}
-
-/* do_prompt - show login prompt, optionally preceded by /etc/issue contents */
-static void do_prompt(struct options *op, struct termio *tp)
-{
-#ifdef ISSUE /* optional: show /etc/issue */
- print_login_issue(op->issue, op->tty);
-#endif
- print_login_prompt();
-}
-
-/* next_speed - select next baud rate */
-static void next_speed(struct termio *tp, struct options *op)
-{
- static int baud_index = FIRST_SPEED; /* current speed index */
- baud_index = (baud_index + 1) % op->numspeed;
- tp->c_cflag &= ~CBAUD;
- tp->c_cflag |= op->speeds[baud_index];
- (void) ioctl(0, TCSETA, tp);
+ /* Restore terminal settings */
+ G.termios.c_cc[VMIN] = 1; /* restore to value set by termios_init */
+ set_termios();
}
-/* get_logname - get user name, establish parity, speed, erase, kill, eol */
-/* return NULL on failure, logname on success */
-static char *get_logname(struct options *op, struct chardata *cp, struct termio *tp)
+/* get user name, establish parity, speed, erase, kill, eol;
+ * return NULL on BREAK, logname on success
+ */
+static char *get_logname(void)
{
-#define logname bb_common_bufsiz1
char *bp;
- char c; /* input character, full eight bits */
- char ascval; /* low 7 bits of input character */
- int bits; /* # of "1" bits per character */
- int mask; /* mask with 1 bit up */
- static char *erase[] = { /* backspace-space-backspace */
- "\010\040\010", /* space parity */
- "\010\040\010", /* odd parity */
- "\210\240\210", /* even parity */
- "\210\240\210", /* no parity */
- };
-
- /* Initialize kill, erase, parity etc. (also after switching speeds). */
-
- *cp = init_chardata;
-
- /* Flush pending input (esp. after parsing or switching the baud rate). */
+ char c;
- (void) sleep(1);
- (void) ioctl(0, TCFLSH, TCIFLUSH);
+ /* Flush pending input (esp. after parsing or switching the baud rate) */
+ usleep(100*1000); /* 0.1 sec */
+ tcflush(STDIN_FILENO, TCIFLUSH);
- /* Prompt for and read a login name. */
-
- for (*logname = 0; *logname == 0; /* void */ ) {
-
- /* Write issue file and prompt, with "parity" bit == 0. */
-
- do_prompt(op, tp);
-
- /* Read name, watch for break, parity, erase, kill, end-of-line. */
-
- for (bp = logname, cp->eol = 0; cp->eol == 0; /* void */ ) {
-
- /* Do not report trivial EINTR/EIO errors. */
-
- if (read(0, &c, 1) < 1) {
+ /* Prompt for and read a login name */
+ G.line_buf[0] = '\0';
+ while (!G.line_buf[0]) {
+ /* Write issue file and prompt */
+#ifdef ISSUE
+ if (!(option_mask32 & F_NOISSUE))
+ print_login_issue(G.issue, G.tty);
+#endif
+ print_login_prompt();
+
+ /* Read name, watch for break, parity, erase, kill, end-of-line */
+ bp = G.line_buf;
+ G.eol = '\0';
+ while (1) {
+ /* Do not report trivial EINTR/EIO errors */
+ errno = EINTR; /* make read of 0 bytes be silent too */
+ if (read(STDIN_FILENO, &c, 1) < 1) {
if (errno == EINTR || errno == EIO)
- exit(0);
- error("%s: read: %m", op->tty);
+ exit(EXIT_SUCCESS);
+ bb_perror_msg_and_die(bb_msg_read_error);
}
- /* Do BREAK handling elsewhere. */
- if ((c == 0) && op->numspeed > 1)
- /* return (0); */
+ /* BREAK. If we have speeds to try,
+ * return NULL (will switch speeds and return here) */
+ if (c == '\0' && G.numspeed > 1)
return NULL;
- /* Do parity bit handling. */
-
- if (c != (ascval = (c & 0177))) { /* "parity" bit on ? */
- for (bits = 1, mask = 1; mask & 0177; mask <<= 1)
- if (mask & ascval)
- bits++; /* count "1" bits */
- cp->parity |= ((bits & 1) ? 1 : 2);
- }
- /* Do erase, kill and end-of-line processing. */
-
- switch (ascval) {
- case CR:
- case NL:
- *bp = 0; /* terminate logname */
- cp->eol = ascval; /* set end-of-line char */
- break;
+ /* Do erase, kill and end-of-line processing */
+ switch (c) {
+ case '\r':
+ case '\n':
+ *bp = '\0';
+ G.eol = c;
+ goto got_logname;
case BS:
case DEL:
- case '#':
- cp->erase = ascval; /* set erase character */
- if (bp > logname) {
- (void) write(1, erase[cp->parity], 3);
+ G.termios.c_cc[VERASE] = c;
+ if (bp > G.line_buf) {
+ full_write(STDOUT_FILENO, "\010 \010", 3);
bp--;
}
break;
case CTL('U'):
- case '@':
- cp->kill = ascval; /* set kill character */
- while (bp > logname) {
- (void) write(1, erase[cp->parity], 3);
+ while (bp > G.line_buf) {
+ full_write(STDOUT_FILENO, "\010 \010", 3);
bp--;
}
break;
case CTL('D'):
- exit(0);
+ exit(EXIT_SUCCESS);
default:
- if (!isascii(ascval) || !isprint(ascval)) {
- /* ignore garbage characters */ ;
- } else if (bp - logname >= sizeof(logname) - 1) {
- error("%s: input overrun", op->tty);
- } else {
- (void) write(1, &c, 1); /* echo the character */
- *bp++ = ascval; /* and store it */
+ if ((unsigned char)c < ' ') {
+ /* ignore garbage characters */
+ } else if ((int)(bp - G.line_buf) < sizeof(G.line_buf) - 1) {
+ /* echo and store the character */
+ full_write(STDOUT_FILENO, &c, 1);
+ *bp++ = c;
}
break;
}
- }
- }
- /* Handle names with upper case and no lower case. */
+ } /* end of get char loop */
+ got_logname: ;
+ } /* while logname is empty */
- if ((cp->capslock = caps_lock(logname))) {
- for (bp = logname; *bp; bp++)
- if (isupper(*bp))
- *bp = tolower(*bp); /* map name to lower case */
- }
- return (logname);
+ return G.line_buf;
}
-/* termio_final - set the final tty mode bits */
-static void termio_final(struct options *op, struct termio *tp, struct chardata *cp)
+int getty_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
+int getty_main(int argc UNUSED_PARAM, char **argv)
{
- /* General terminal-independent stuff. */
-
- tp->c_iflag |= IXON | IXOFF; /* 2-way flow control */
- tp->c_lflag |= ICANON | ISIG | ECHO | ECHOE | ECHOK | ECHOKE;
- /* no longer| ECHOCTL | ECHOPRT */
- tp->c_oflag |= OPOST;
- /* tp->c_cflag = 0; */
- tp->c_cc[VINTR] = DEF_INTR; /* default interrupt */
- tp->c_cc[VQUIT] = DEF_QUIT; /* default quit */
- tp->c_cc[VEOF] = DEF_EOF; /* default EOF character */
- tp->c_cc[VEOL] = DEF_EOL;
- tp->c_cc[VSWTC] = DEF_SWITCH; /* default switch character */
-
- /* Account for special characters seen in input. */
-
- if (cp->eol == CR) {
- tp->c_iflag |= ICRNL; /* map CR in input to NL */
- tp->c_oflag |= ONLCR; /* map NL in output to CR-NL */
- }
- tp->c_cc[VERASE] = cp->erase; /* set erase character */
- tp->c_cc[VKILL] = cp->kill; /* set kill character */
-
- /* Account for the presence or absence of parity bits in input. */
-
- switch (cp->parity) {
- case 0: /* space (always 0) parity */
- break;
- case 1: /* odd parity */
- tp->c_cflag |= PARODD;
- /* FALLTHROUGH */
- case 2: /* even parity */
- tp->c_cflag |= PARENB;
- tp->c_iflag |= INPCK | ISTRIP;
- /* FALLTHROUGH */
- case (1 | 2): /* no parity bit */
- tp->c_cflag &= ~CSIZE;
- tp->c_cflag |= CS7;
- break;
- }
- /* Account for upper case without lower case. */
-
- if (cp->capslock) {
- tp->c_iflag |= IUCLC;
- tp->c_lflag |= XCASE;
- tp->c_oflag |= OLCUC;
- }
- /* Optionally enable hardware flow control */
+ int n;
+ pid_t pid;
+ char *logname;
-#ifdef CRTSCTS
- if (op->flags & F_RTSCTS)
- tp->c_cflag |= CRTSCTS;
+ INIT_G();
+ G.login = _PATH_LOGIN; /* default login program */
+#ifdef ISSUE
+ G.issue = ISSUE; /* default issue file */
#endif
+ G.eol = '\r';
- /* Finally, make the new settings effective */
+ /* Parse command-line arguments */
+ parse_args(argv);
- if (ioctl(0, TCSETA, tp) < 0)
- error("%s: ioctl: TCSETA: %m", op->tty);
-}
+ logmode = LOGMODE_NONE;
-/* caps_lock - string contains upper case without lower case */
-/* returns 1 if true, 0 if false */
-static int caps_lock(const char *s)
-{
- int capslock;
+ /* Create new session, lose controlling tty, if any */
+ /* docs/ctty.htm says:
+ * "This is allowed only when the current process
+ * is not a process group leader" - is this a problem? */
+ setsid();
+ /* close stdio, and stray descriptors, just in case */
+ n = xopen(bb_dev_null, O_RDWR);
+ /* dup2(n, 0); - no, we need to handle "getty - 9600" too */
+ xdup2(n, 1);
+ xdup2(n, 2);
+ while (n > 2)
+ close(n--);
+
+ /* Logging. We want special flavor of error_msg_and_die */
+ die_sleep = 10;
+ msg_eol = "\r\n";
+ /* most likely will internally use fd #3 in CLOEXEC mode: */
+ openlog(applet_name, LOG_PID, LOG_AUTH);
+ logmode = LOGMODE_BOTH;
- for (capslock = 0; *s; s++) {
- if (islower(*s))
- return (0);
- if (capslock == 0)
- capslock = isupper(*s);
+#ifdef DEBUGGING
+ dbf = xfopen_for_write(DEBUGTERM);
+ for (n = 1; argv[n]; n++) {
+ debug(argv[n]);
+ debug("\n");
}
- return (capslock);
-}
+#endif
-/* bcode - convert speed string to speed code; return 0 on failure */
-static int bcode(const char *s)
-{
- int r;
- unsigned long value;
- if (safe_strtoul((char *)s, &value)) {
- return -1;
+ /* Open the tty as standard input, if it is not "-" */
+ /* If it's not "-" and not taken yet, it will become our ctty */
+ debug("calling open_tty\n");
+ open_tty();
+ ndelay_off(0);
+ debug("duping\n");
+ xdup2(0, 1);
+ xdup2(0, 2);
+
+ /*
+ * The following ioctl will fail if stdin is not a tty, but also when
+ * there is noise on the modem control lines. In the latter case, the
+ * common course of action is (1) fix your cables (2) give the modem more
+ * time to properly reset after hanging up. SunOS users can achieve (2)
+ * by patching the SunOS kernel variable "zsadtrlow" to a larger value;
+ * 5 seconds seems to be a good value.
+ */
+ if (tcgetattr(STDIN_FILENO, &G.termios) < 0)
+ bb_perror_msg_and_die("tcgetattr");
+
+ pid = getpid();
+#ifdef __linux__
+// FIXME: do we need this? Otherwise "-" case seems to be broken...
+ // /* Forcibly make fd 0 our controlling tty, even if another session
+ // * has it as a ctty. (Another session loses ctty). */
+ // ioctl(STDIN_FILENO, TIOCSCTTY, (void*)1);
+ /* Make ourself a foreground process group within our session */
+ tcsetpgrp(STDIN_FILENO, pid);
+#endif
+
+ /* Update the utmp file. This tty is ours now! */
+ update_utmp(pid, LOGIN_PROCESS, G.tty, "LOGIN", G.fakehost);
+
+ /* Initialize the termios settings (raw mode, eight-bit, blocking i/o) */
+ debug("calling termios_init\n");
+ termios_init(G.speeds[0]);
+
+ /* Write the modem init string and DON'T flush the buffers */
+ if (option_mask32 & F_INITSTRING) {
+ debug("writing init string\n");
+ full_write1_str(G.initstring);
}
- if ((r = bb_value_to_baud(value)) > 0) {
- return r;
+
+ /* Optionally detect the baud rate from the modem status message */
+ debug("before autobaud\n");
+ if (option_mask32 & F_PARSE)
+ auto_baud();
+
+ /* Set the optional timer */
+ alarm(G.timeout); /* if 0, alarm is not set */
+//BUG: death by signal won't restore termios
+
+ /* Optionally wait for CR or LF before writing /etc/issue */
+ if (option_mask32 & F_WAITCRLF) {
+ char ch;
+ debug("waiting for cr-lf\n");
+ while (safe_read(STDIN_FILENO, &ch, 1) == 1) {
+ debug("read %x\n", (unsigned char)ch);
+ if (ch == '\n' || ch == '\r')
+ break;
+ }
}
- return 0;
-}
-/*
- * output error messages
- */
-static void error(const char *fmt, ...)
-{
- va_list va_alist;
- char buf[256];
-
-#ifdef CONFIG_SYSLOGD
- va_start(va_alist, fmt);
- vsnprintf(buf, sizeof(buf), fmt, va_alist);
- openlog(bb_applet_name, 0, LOG_AUTH);
- syslog(LOG_ERR, "%s", buf);
- closelog();
-#else
- int fd;
- size_t l;
-
- snprintf(buf, sizeof(buf), "%s: ", bb_applet_name);
- l = strlen(buf);
- va_start(va_alist, fmt);
- vsnprintf(buf + l, sizeof(buf) - l, fmt, va_alist);
- l = strlen(buf);
- /* truncate if need */
- if((l + 3) > sizeof(buf))
- l = sizeof(buf) - 3;
- /* add \r\n always */
- buf[l++] = '\r';
- buf[l++] = '\n';
- buf[l] = 0;
- if ((fd = open("/dev/console", 1)) >= 0) {
- write(fd, buf, l);
- close(fd);
+ logname = NULL;
+ if (!(option_mask32 & F_NOPROMPT)) {
+ /* NB: termios_init already set line speed
+ * to G.speeds[0] */
+ int baud_index = 0;
+
+ while (1) {
+ /* Read the login name */
+ debug("reading login name\n");
+ logname = get_logname();
+ if (logname)
+ break;
+ /* We are here only if G.numspeed > 1 */
+ baud_index = (baud_index + 1) % G.numspeed;
+ cfsetspeed(&G.termios, G.speeds[baud_index]);
+ set_termios();
+ }
}
-#endif
- va_end(va_alist);
+ /* Disable timer */
+ alarm(0);
+
+ /* Finalize the termios settings */
+ termios_final();
+
+ /* Now the newline character should be properly written */
+ full_write(STDOUT_FILENO, "\n", 1);
- (void) sleep((unsigned) 10); /* be kind to init(8) */
- exit(1);
+ /* Let the login program take care of password validation */
+ /* We use PATH because we trust that root doesn't set "bad" PATH,
+ * and getty is not suid-root applet */
+ /* With -n, logname == NULL, and login will ask for username instead */
+ BB_EXECLP(G.login, G.login, "--", logname, NULL);
+ bb_error_msg_and_die("can't execute '%s'", G.login);
}