* libusb_get_iso_packet_buffer() and libusb_get_iso_packet_buffer_simple()
* functions may help you here.
*
+ * <b>Note</b>: Some operating systems (e.g. Linux) may impose limits on the
+ * length of individual isochronous packets and/or the total length of the
+ * isochronous transfer. Such limits can be difficult for libusb to detect,
+ * so the library will simply try and submit the transfer as set up by you.
+ * If the transfer fails to submit because it is too large,
+ * libusb_submit_transfer() will return
+ * \ref libusb_error::LIBUSB_ERROR_INVALID_PARAM "LIBUSB_ERROR_INVALID_PARAM".
+ *
* \section asyncmem Memory caveats
*
* In most circumstances, it is not safe to use stack memory for transfer
*
* -# During initialization, libusb opens an internal pipe, and it adds the read
* end of this pipe to the set of file descriptors to be polled.
- * -# During libusb_close(), libusb writes some dummy data on this control pipe.
+ * -# During libusb_close(), libusb writes some dummy data on this event pipe.
* This immediately interrupts the event handler. libusb also records
* internally that it is trying to interrupt event handlers for this
* high-priority event.
* call to libusb_open():
*
* -# The device is opened and a file descriptor is added to the poll set.
- * -# libusb sends some dummy data on the control pipe, and records that it
+ * -# libusb sends some dummy data on the event pipe, and records that it
* is trying to modify the poll descriptor set.
* -# The event handler is interrupted, and the same behaviour change as for
* libusb_close() takes effect, causing all event handling threads to become
int r;
usbi_mutex_init(&ctx->flying_transfers_lock, NULL);
- usbi_mutex_init(&ctx->pollfds_lock, NULL);
- usbi_mutex_init(&ctx->pollfd_modify_lock, NULL);
usbi_mutex_init_recursive(&ctx->events_lock, NULL);
usbi_mutex_init(&ctx->event_waiters_lock, NULL);
usbi_cond_init(&ctx->event_waiters_cond, NULL);
+ usbi_mutex_init(&ctx->event_data_lock, NULL);
list_init(&ctx->flying_transfers);
list_init(&ctx->ipollfds);
+ list_init(&ctx->hotplug_msgs);
+ list_init(&ctx->completed_transfers);
/* FIXME should use an eventfd on kernels that support it */
- r = usbi_pipe(ctx->ctrl_pipe);
+ r = usbi_pipe(ctx->event_pipe);
if (r < 0) {
r = LIBUSB_ERROR_OTHER;
goto err;
}
- r = usbi_add_pollfd(ctx, ctx->ctrl_pipe[0], POLLIN);
+ r = usbi_add_pollfd(ctx, ctx->event_pipe[0], POLLIN);
if (r < 0)
goto err_close_pipe;
- /* create hotplug pipe */
- r = usbi_pipe(ctx->hotplug_pipe);
- if (r < 0) {
- r = LIBUSB_ERROR_OTHER;
- goto err_remove_pipe;
- }
-
- r = usbi_add_pollfd(ctx, ctx->hotplug_pipe[0], POLLIN);
- if (r < 0)
- goto err_close_hp_pipe;
-
#ifdef USBI_TIMERFD_AVAILABLE
ctx->timerfd = timerfd_create(usbi_backend->get_timerfd_clockid(),
TFD_NONBLOCK);
#ifdef USBI_TIMERFD_AVAILABLE
err_close_timerfd:
close(ctx->timerfd);
- usbi_remove_pollfd(ctx, ctx->hotplug_pipe[0]);
+ usbi_remove_pollfd(ctx, ctx->event_pipe[0]);
#endif
-err_close_hp_pipe:
- usbi_close(ctx->hotplug_pipe[0]);
- usbi_close(ctx->hotplug_pipe[1]);
-err_remove_pipe:
- usbi_remove_pollfd(ctx, ctx->ctrl_pipe[0]);
err_close_pipe:
- usbi_close(ctx->ctrl_pipe[0]);
- usbi_close(ctx->ctrl_pipe[1]);
+ usbi_close(ctx->event_pipe[0]);
+ usbi_close(ctx->event_pipe[1]);
err:
usbi_mutex_destroy(&ctx->flying_transfers_lock);
- usbi_mutex_destroy(&ctx->pollfds_lock);
- usbi_mutex_destroy(&ctx->pollfd_modify_lock);
usbi_mutex_destroy(&ctx->events_lock);
usbi_mutex_destroy(&ctx->event_waiters_lock);
usbi_cond_destroy(&ctx->event_waiters_cond);
+ usbi_mutex_destroy(&ctx->event_data_lock);
return r;
}
void usbi_io_exit(struct libusb_context *ctx)
{
- usbi_remove_pollfd(ctx, ctx->ctrl_pipe[0]);
- usbi_close(ctx->ctrl_pipe[0]);
- usbi_close(ctx->ctrl_pipe[1]);
- usbi_remove_pollfd(ctx, ctx->hotplug_pipe[0]);
- usbi_close(ctx->hotplug_pipe[0]);
- usbi_close(ctx->hotplug_pipe[1]);
+ usbi_remove_pollfd(ctx, ctx->event_pipe[0]);
+ usbi_close(ctx->event_pipe[0]);
+ usbi_close(ctx->event_pipe[1]);
#ifdef USBI_TIMERFD_AVAILABLE
if (usbi_using_timerfd(ctx)) {
usbi_remove_pollfd(ctx, ctx->timerfd);
}
#endif
usbi_mutex_destroy(&ctx->flying_transfers_lock);
- usbi_mutex_destroy(&ctx->pollfds_lock);
- usbi_mutex_destroy(&ctx->pollfd_modify_lock);
usbi_mutex_destroy(&ctx->events_lock);
usbi_mutex_destroy(&ctx->event_waiters_lock);
usbi_cond_destroy(&ctx->event_waiters_cond);
+ usbi_mutex_destroy(&ctx->event_data_lock);
if (ctx->pollfds)
free(ctx->pollfds);
}
return 0;
}
-/* add a transfer to the (timeout-sorted) active transfers list.
- * Callers of this function must hold the flying_transfers_lock.
- * This function *always* adds the transfer to the flying_transfers list,
- * it will return non 0 if it fails to update the timer, but even then the
- * transfer is added to the flying_transfers list. */
-static int add_to_flying_list(struct usbi_transfer *transfer)
-{
- struct usbi_transfer *cur;
- struct timeval *timeout = &transfer->timeout;
- struct libusb_context *ctx = ITRANSFER_CTX(transfer);
- int r = 0;
- int first = 1;
-
- /* if we have no other flying transfers, start the list with this one */
- if (list_empty(&ctx->flying_transfers)) {
- list_add(&transfer->list, &ctx->flying_transfers);
- goto out;
- }
-
- /* if we have infinite timeout, append to end of list */
- if (!timerisset(timeout)) {
- list_add_tail(&transfer->list, &ctx->flying_transfers);
- /* first is irrelevant in this case */
- goto out;
- }
-
- /* otherwise, find appropriate place in list */
- list_for_each_entry(cur, &ctx->flying_transfers, list, struct usbi_transfer) {
- /* find first timeout that occurs after the transfer in question */
- struct timeval *cur_tv = &cur->timeout;
-
- if (!timerisset(cur_tv) || (cur_tv->tv_sec > timeout->tv_sec) ||
- (cur_tv->tv_sec == timeout->tv_sec &&
- cur_tv->tv_usec > timeout->tv_usec)) {
- list_add_tail(&transfer->list, &cur->list);
- goto out;
- }
- first = 0;
- }
- /* first is 0 at this stage (list not empty) */
-
- /* otherwise we need to be inserted at the end */
- list_add_tail(&transfer->list, &ctx->flying_transfers);
-out:
-#ifdef USBI_TIMERFD_AVAILABLE
- if (first && usbi_using_timerfd(ctx) && timerisset(timeout)) {
- /* if this transfer has the lowest timeout of all active transfers,
- * rearm the timerfd with this transfer's timeout */
- const struct itimerspec it = { {0, 0},
- { timeout->tv_sec, timeout->tv_usec * 1000 } };
- usbi_dbg("arm timerfd for timeout in %dms (first in line)",
- USBI_TRANSFER_TO_LIBUSB_TRANSFER(transfer)->timeout);
- r = timerfd_settime(ctx->timerfd, TFD_TIMER_ABSTIME, &it, NULL);
- if (r < 0) {
- usbi_warn(ctx, "failed to arm first timerfd (errno %d)", errno);
- r = LIBUSB_ERROR_OTHER;
- }
- }
-#else
- UNUSED(first);
-#endif
-
- return r;
-}
-
/** \ingroup asyncio
* Allocate a libusb transfer with a specified number of isochronous packet
* descriptors. The returned transfer is pre-initialized for you. When the new
struct libusb_transfer * LIBUSB_CALL libusb_alloc_transfer(
int iso_packets)
{
- size_t os_alloc_size = usbi_backend->transfer_priv_size
- + (usbi_backend->add_iso_packet_size * iso_packets);
+ struct libusb_transfer *transfer;
+ size_t os_alloc_size = usbi_backend->transfer_priv_size;
size_t alloc_size = sizeof(struct usbi_transfer)
+ sizeof(struct libusb_transfer)
+ (sizeof(struct libusb_iso_packet_descriptor) * iso_packets)
itransfer->num_iso_packets = iso_packets;
usbi_mutex_init(&itransfer->lock, NULL);
- return USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ usbi_mutex_init(&itransfer->flags_lock, NULL);
+ transfer = USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
+ usbi_dbg("transfer %p", transfer);
+ return transfer;
}
/** \ingroup asyncio
if (!transfer)
return;
+ usbi_dbg("transfer %p", transfer);
if (transfer->flags & LIBUSB_TRANSFER_FREE_BUFFER && transfer->buffer)
free(transfer->buffer);
itransfer = LIBUSB_TRANSFER_TO_USBI_TRANSFER(transfer);
usbi_mutex_destroy(&itransfer->lock);
+ usbi_mutex_destroy(&itransfer->flags_lock);
free(itransfer);
}
/* iterates through the flying transfers, and rearms the timerfd based on the
* next upcoming timeout.
* must be called with flying_list locked.
- * returns 0 if there was no timeout to arm, 1 if the next timeout was armed,
- * or a LIBUSB_ERROR code on failure.
+ * returns 0 on success or a LIBUSB_ERROR code on failure.
*/
static int arm_timerfd_for_next_timeout(struct libusb_context *ctx)
{
goto disarm;
/* act on first transfer that is not already cancelled */
- if (!(transfer->flags & USBI_TRANSFER_TIMED_OUT)) {
+ if (!(transfer->flags & USBI_TRANSFER_TIMEOUT_HANDLED)) {
int r;
const struct itimerspec it = { {0, 0},
{ cur_tv->tv_sec, cur_tv->tv_usec * 1000 } };
r = timerfd_settime(ctx->timerfd, TFD_TIMER_ABSTIME, &it, NULL);
if (r < 0)
return LIBUSB_ERROR_OTHER;
- return 1;
+ return 0;
}
}
}
#endif
+/* add a transfer to the (timeout-sorted) active transfers list.
+ * This function will return non 0 if fails to update the timer,
+ * in which case the transfer is *not* on the flying_transfers list. */
+static int add_to_flying_list(struct usbi_transfer *transfer)
+{
+ struct usbi_transfer *cur;
+ struct timeval *timeout = &transfer->timeout;
+ struct libusb_context *ctx = ITRANSFER_CTX(transfer);
+ int r = 0;
+ int first = 1;
+
+ usbi_mutex_lock(&ctx->flying_transfers_lock);
+
+ /* if we have no other flying transfers, start the list with this one */
+ if (list_empty(&ctx->flying_transfers)) {
+ list_add(&transfer->list, &ctx->flying_transfers);
+ goto out;
+ }
+
+ /* if we have infinite timeout, append to end of list */
+ if (!timerisset(timeout)) {
+ list_add_tail(&transfer->list, &ctx->flying_transfers);
+ /* first is irrelevant in this case */
+ goto out;
+ }
+
+ /* otherwise, find appropriate place in list */
+ list_for_each_entry(cur, &ctx->flying_transfers, list, struct usbi_transfer) {
+ /* find first timeout that occurs after the transfer in question */
+ struct timeval *cur_tv = &cur->timeout;
+
+ if (!timerisset(cur_tv) || (cur_tv->tv_sec > timeout->tv_sec) ||
+ (cur_tv->tv_sec == timeout->tv_sec &&
+ cur_tv->tv_usec > timeout->tv_usec)) {
+ list_add_tail(&transfer->list, &cur->list);
+ goto out;
+ }
+ first = 0;
+ }
+ /* first is 0 at this stage (list not empty) */
+
+ /* otherwise we need to be inserted at the end */
+ list_add_tail(&transfer->list, &ctx->flying_transfers);
+out:
+#ifdef USBI_TIMERFD_AVAILABLE
+ if (first && usbi_using_timerfd(ctx) && timerisset(timeout)) {
+ /* if this transfer has the lowest timeout of all active transfers,
+ * rearm the timerfd with this transfer's timeout */
+ const struct itimerspec it = { {0, 0},
+ { timeout->tv_sec, timeout->tv_usec * 1000 } };
+ usbi_dbg("arm timerfd for timeout in %dms (first in line)",
+ USBI_TRANSFER_TO_LIBUSB_TRANSFER(transfer)->timeout);
+ r = timerfd_settime(ctx->timerfd, TFD_TIMER_ABSTIME, &it, NULL);
+ if (r < 0) {
+ usbi_warn(ctx, "failed to arm first timerfd (errno %d)", errno);
+ r = LIBUSB_ERROR_OTHER;
+ }
+ }
+#else
+ UNUSED(first);
+#endif
+
+ if (r)
+ list_del(&transfer->list);
+
+ usbi_mutex_unlock(&ctx->flying_transfers_lock);
+ return r;
+}
+
+/* remove a transfer from the active transfers list.
+ * This function will *always* remove the transfer from the
+ * flying_transfers list. It will return a LIBUSB_ERROR code
+ * if it fails to update the timer for the next timeout. */
+static int remove_from_flying_list(struct usbi_transfer *transfer)
+{
+ struct libusb_context *ctx = ITRANSFER_CTX(transfer);
+ int rearm_timerfd;
+ int r = 0;
+
+ usbi_mutex_lock(&ctx->flying_transfers_lock);
+ rearm_timerfd = (timerisset(&transfer->timeout) &&
+ list_first_entry(&ctx->flying_transfers, struct usbi_transfer, list) == transfer);
+ list_del(&transfer->list);
+ if (usbi_using_timerfd(ctx) && rearm_timerfd)
+ r = arm_timerfd_for_next_timeout(ctx);
+ usbi_mutex_unlock(&ctx->flying_transfers_lock);
+
+ return r;
+}
+
/** \ingroup asyncio
* Submit a transfer. This function will fire off the USB transfer and then
* return immediately.
*/
int API_EXPORTED libusb_submit_transfer(struct libusb_transfer *transfer)
{
- struct libusb_context *ctx = TRANSFER_CTX(transfer);
struct usbi_transfer *itransfer =
LIBUSB_TRANSFER_TO_USBI_TRANSFER(transfer);
+ int remove = 0;
int r;
- int updated_fds;
- usbi_mutex_lock(&ctx->flying_transfers_lock);
+ usbi_dbg("transfer %p", transfer);
usbi_mutex_lock(&itransfer->lock);
+ usbi_mutex_lock(&itransfer->flags_lock);
+ if (itransfer->flags & USBI_TRANSFER_IN_FLIGHT) {
+ r = LIBUSB_ERROR_BUSY;
+ goto out;
+ }
itransfer->transferred = 0;
itransfer->flags = 0;
r = calculate_timeout(itransfer);
r = LIBUSB_ERROR_OTHER;
goto out;
}
+ itransfer->flags |= USBI_TRANSFER_SUBMITTING;
+ usbi_mutex_unlock(&itransfer->flags_lock);
r = add_to_flying_list(itransfer);
- if (r == LIBUSB_SUCCESS) {
- r = usbi_backend->submit_transfer(itransfer);
+ if (r) {
+ usbi_mutex_lock(&itransfer->flags_lock);
+ itransfer->flags = 0;
+ goto out;
}
- if (r != LIBUSB_SUCCESS) {
- list_del(&itransfer->list);
- arm_timerfd_for_next_timeout(ctx);
+
+ /* keep a reference to this device */
+ libusb_ref_device(transfer->dev_handle->dev);
+ r = usbi_backend->submit_transfer(itransfer);
+
+ usbi_mutex_lock(&itransfer->flags_lock);
+ itransfer->flags &= ~USBI_TRANSFER_SUBMITTING;
+ if (r == LIBUSB_SUCCESS) {
+ /* check for two possible special conditions:
+ * 1) device disconnect occurred immediately after submission
+ * 2) transfer completed before we got here to update the flags
+ */
+ if (itransfer->flags & USBI_TRANSFER_DEVICE_DISAPPEARED) {
+ usbi_backend->clear_transfer_priv(itransfer);
+ remove = 1;
+ r = LIBUSB_ERROR_NO_DEVICE;
+ }
+ else if (!(itransfer->flags & USBI_TRANSFER_COMPLETED)) {
+ itransfer->flags |= USBI_TRANSFER_IN_FLIGHT;
+ }
} else {
- /* keep a reference to this device */
- libusb_ref_device(transfer->dev_handle->dev);
+ remove = 1;
}
out:
- updated_fds = (itransfer->flags & USBI_TRANSFER_UPDATED_FDS);
+ usbi_mutex_unlock(&itransfer->flags_lock);
+ if (remove) {
+ libusb_unref_device(transfer->dev_handle->dev);
+ remove_from_flying_list(itransfer);
+ }
usbi_mutex_unlock(&itransfer->lock);
- usbi_mutex_unlock(&ctx->flying_transfers_lock);
- if (updated_fds)
- usbi_fd_notification(ctx);
return r;
}
*
* \param transfer the transfer to cancel
* \returns 0 on success
- * \returns LIBUSB_ERROR_NOT_FOUND if the transfer is already complete or
- * cancelled.
+ * \returns LIBUSB_ERROR_NOT_FOUND if the transfer is not in progress,
+ * already complete, or already cancelled.
* \returns a LIBUSB_ERROR code on failure
*/
int API_EXPORTED libusb_cancel_transfer(struct libusb_transfer *transfer)
LIBUSB_TRANSFER_TO_USBI_TRANSFER(transfer);
int r;
- usbi_dbg("");
+ usbi_dbg("transfer %p", transfer );
usbi_mutex_lock(&itransfer->lock);
+ usbi_mutex_lock(&itransfer->flags_lock);
+ if (!(itransfer->flags & USBI_TRANSFER_IN_FLIGHT)
+ || (itransfer->flags & USBI_TRANSFER_CANCELLING)) {
+ r = LIBUSB_ERROR_NOT_FOUND;
+ goto out;
+ }
r = usbi_backend->cancel_transfer(itransfer);
if (r < 0) {
if (r != LIBUSB_ERROR_NOT_FOUND &&
itransfer->flags |= USBI_TRANSFER_CANCELLING;
+out:
+ usbi_mutex_unlock(&itransfer->flags_lock);
usbi_mutex_unlock(&itransfer->lock);
return r;
}
{
struct libusb_transfer *transfer =
USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
- struct libusb_context *ctx = TRANSFER_CTX(transfer);
struct libusb_device_handle *handle = transfer->dev_handle;
uint8_t flags;
- int r = 0;
+ int r;
- /* FIXME: could be more intelligent with the timerfd here. we don't need
- * to disarm the timerfd if there was no timer running, and we only need
- * to rearm the timerfd if the transfer that expired was the one with
- * the shortest timeout. */
+ r = remove_from_flying_list(itransfer);
+ if (r < 0)
+ usbi_err(ITRANSFER_CTX(itransfer), "failed to set timer for next timeout, errno=%d", errno);
- usbi_mutex_lock(&ctx->flying_transfers_lock);
- list_del(&itransfer->list);
- if (usbi_using_timerfd(ctx))
- r = arm_timerfd_for_next_timeout(ctx);
- usbi_mutex_unlock(&ctx->flying_transfers_lock);
- if (usbi_using_timerfd(ctx) && (r < 0))
- return r;
+ usbi_mutex_lock(&itransfer->flags_lock);
+ itransfer->flags &= ~USBI_TRANSFER_IN_FLIGHT;
+ itransfer->flags |= USBI_TRANSFER_COMPLETED;
+ usbi_mutex_unlock(&itransfer->flags_lock);
if (status == LIBUSB_TRANSFER_COMPLETED
&& transfer->flags & LIBUSB_TRANSFER_SHORT_NOT_OK) {
if (flags & LIBUSB_TRANSFER_FREE_TRANSFER)
libusb_free_transfer(transfer);
libusb_unref_device(handle->dev);
- return 0;
+ return r;
}
/* Similar to usbi_handle_transfer_completion() but exclusively for transfers
return usbi_handle_transfer_completion(transfer, LIBUSB_TRANSFER_CANCELLED);
}
+/* Add a completed transfer to the completed_transfers list of the
+ * context and signal the event. The backend's handle_transfer_completion()
+ * function will be called the next time an event handler runs. */
+void usbi_signal_transfer_completion(struct usbi_transfer *transfer)
+{
+ struct libusb_context *ctx = ITRANSFER_CTX(transfer);
+ int pending_events;
+
+ usbi_mutex_lock(&ctx->event_data_lock);
+ pending_events = usbi_pending_events(ctx);
+ list_add_tail(&transfer->completed_list, &ctx->completed_transfers);
+ if (!pending_events)
+ usbi_signal_event(ctx);
+ usbi_mutex_unlock(&ctx->event_data_lock);
+}
+
/** \ingroup poll
* Attempt to acquire the event handling lock. This lock is used to ensure that
* only one thread is monitoring libusb event sources at any one time.
unsigned int ru;
USBI_GET_CONTEXT(ctx);
- /* is someone else waiting to modify poll fds? if so, don't let this thread
+ /* is someone else waiting to close a device? if so, don't let this thread
* start event handling */
- usbi_mutex_lock(&ctx->pollfd_modify_lock);
- ru = ctx->pollfd_modify;
- usbi_mutex_unlock(&ctx->pollfd_modify_lock);
+ usbi_mutex_lock(&ctx->event_data_lock);
+ ru = ctx->device_close;
+ usbi_mutex_unlock(&ctx->event_data_lock);
if (ru) {
- usbi_dbg("someone else is modifying poll fds");
+ usbi_dbg("someone else is closing a device");
return 1;
}
/* FIXME: perhaps we should be a bit more efficient by not broadcasting
* the availability of the events lock when we are modifying pollfds
- * (check ctx->pollfd_modify)? */
+ * (check ctx->device_close)? */
usbi_mutex_lock(&ctx->event_waiters_lock);
usbi_cond_broadcast(&ctx->event_waiters_cond);
usbi_mutex_unlock(&ctx->event_waiters_lock);
unsigned int r;
USBI_GET_CONTEXT(ctx);
- /* is someone else waiting to modify poll fds? if so, don't let this thread
+ /* is someone else waiting to close a device? if so, don't let this thread
* continue event handling */
- usbi_mutex_lock(&ctx->pollfd_modify_lock);
- r = ctx->pollfd_modify;
- usbi_mutex_unlock(&ctx->pollfd_modify_lock);
+ usbi_mutex_lock(&ctx->event_data_lock);
+ r = ctx->device_close;
+ usbi_mutex_unlock(&ctx->event_data_lock);
if (r) {
- usbi_dbg("someone else is modifying poll fds");
+ usbi_dbg("someone else is closing a device");
return 0;
}
unsigned int r;
USBI_GET_CONTEXT(ctx);
- /* is someone else waiting to modify poll fds? if so, don't let this thread
+ /* is someone else waiting to close a device? if so, don't let this thread
* start event handling -- indicate that event handling is happening */
- usbi_mutex_lock(&ctx->pollfd_modify_lock);
- r = ctx->pollfd_modify;
- usbi_mutex_unlock(&ctx->pollfd_modify_lock);
+ usbi_mutex_lock(&ctx->event_data_lock);
+ r = ctx->device_close;
+ usbi_mutex_unlock(&ctx->event_data_lock);
if (r) {
- usbi_dbg("someone else is modifying poll fds");
+ usbi_dbg("someone else is closing a device");
return 1;
}
USBI_TRANSFER_TO_LIBUSB_TRANSFER(itransfer);
int r;
- itransfer->flags |= USBI_TRANSFER_TIMED_OUT;
+ itransfer->flags |= USBI_TRANSFER_TIMEOUT_HANDLED;
r = libusb_cancel_transfer(transfer);
- if (r < 0)
+ if (r == 0)
+ itransfer->flags |= USBI_TRANSFER_TIMED_OUT;
+ else
usbi_warn(TRANSFER_CTX(transfer),
"async cancel failed %d errno=%d", r, errno);
}
return 0;
/* ignore timeouts we've already handled */
- if (transfer->flags & (USBI_TRANSFER_TIMED_OUT | USBI_TRANSFER_OS_HANDLES_TIMEOUT))
+ if (transfer->flags & (USBI_TRANSFER_TIMEOUT_HANDLED | USBI_TRANSFER_OS_HANDLES_TIMEOUT))
continue;
/* if transfer has non-expired timeout, nothing more to do */
/* there are certain fds that libusb uses internally, currently:
*
- * 1) control pipe
- * 2) hotplug pipe
- * 3) timerfd
+ * 1) event pipe
+ * 2) timerfd
*
* the backend will never need to attempt to handle events on these fds, so
* we determine how many fds are in use internally for this context and when
* handle_events() is called in the backend, the pollfd list and count will
* be adjusted to skip over these internal fds */
if (usbi_using_timerfd(ctx))
- internal_nfds = 3;
- else
internal_nfds = 2;
+ else
+ internal_nfds = 1;
/* only reallocate the poll fds when the list of poll fds has been modified
* since the last poll, otherwise reuse them to save the additional overhead */
- usbi_mutex_lock(&ctx->pollfds_lock);
+ usbi_mutex_lock(&ctx->event_data_lock);
if (ctx->pollfds_modified) {
usbi_dbg("poll fds modified, reallocating");
ctx->pollfds = calloc(ctx->pollfds_cnt, sizeof(*ctx->pollfds));
if (!ctx->pollfds) {
- usbi_mutex_unlock(&ctx->pollfds_lock);
+ usbi_mutex_unlock(&ctx->event_data_lock);
return LIBUSB_ERROR_NO_MEM;
}
/* reset the flag now that we have the updated list */
ctx->pollfds_modified = 0;
+
+ /* if no further pending events, clear the event pipe so that we do
+ * not immediately return from poll */
+ if (!usbi_pending_events(ctx))
+ usbi_clear_event(ctx);
}
fds = ctx->pollfds;
nfds = ctx->pollfds_cnt;
- usbi_mutex_unlock(&ctx->pollfds_lock);
+ usbi_mutex_unlock(&ctx->event_data_lock);
timeout_ms = (int)(tv->tv_sec * 1000) + (tv->tv_usec / 1000);
else if (r == -1 && errno == EINTR)
return LIBUSB_ERROR_INTERRUPTED;
else if (r < 0) {
- usbi_err(ctx, "poll failed %d err=%d\n", r, errno);
+ usbi_err(ctx, "poll failed %d err=%d", r, errno);
return LIBUSB_ERROR_IO;
}
special_event = 0;
- /* fd[0] is always the ctrl pipe */
+ /* fds[0] is always the event pipe */
if (fds[0].revents) {
- /* another thread wanted to interrupt event handling, and it succeeded!
- * handle any other events that cropped up at the same time, and
- * simply return */
- usbi_dbg("caught a fish on the control pipe");
+ libusb_hotplug_message *message = NULL;
+ struct usbi_transfer *itransfer;
+ int ret = 0;
- if (0 == --r)
- goto handled;
- }
+ usbi_dbg("caught a fish on the event pipe");
- /* fd[1] is always the hotplug pipe */
- if (libusb_has_capability(LIBUSB_CAP_HAS_HOTPLUG) && fds[1].revents) {
- libusb_hotplug_message message;
- ssize_t ret;
+ /* take the the event data lock while processing events */
+ usbi_mutex_lock(&ctx->event_data_lock);
- usbi_dbg("caught a fish on the hotplug pipe");
- special_event = 1;
+ /* check if someone added a new poll fd */
+ if (ctx->pollfds_modified)
+ usbi_dbg("someone updated the poll fds");
- /* read the message from the hotplug thread */
- ret = usbi_read(ctx->hotplug_pipe[0], &message, sizeof (message));
- if (ret != sizeof(message)) {
- usbi_err(ctx, "hotplug pipe read error %d != %u",
- ret, sizeof(message));
- r = LIBUSB_ERROR_OTHER;
- goto handled;
+ /* check if someone is closing a device */
+ if (ctx->device_close)
+ usbi_dbg("someone is closing a device");
+
+ /* check for any pending hotplug messages */
+ if (!list_empty(&ctx->hotplug_msgs)) {
+ usbi_dbg("hotplug message received");
+ special_event = 1;
+ message = list_first_entry(&ctx->hotplug_msgs, libusb_hotplug_message, list);
+ list_del(&message->list);
+ }
+
+ /* complete any pending transfers */
+ while (ret == 0 && !list_empty(&ctx->completed_transfers)) {
+ itransfer = list_first_entry(&ctx->completed_transfers, struct usbi_transfer, completed_list);
+ list_del(&itransfer->completed_list);
+ usbi_mutex_unlock(&ctx->event_data_lock);
+ ret = usbi_backend->handle_transfer_completion(itransfer);
+ if (ret)
+ usbi_err(ctx, "backend handle_transfer_completion failed with error %d", ret);
+ usbi_mutex_lock(&ctx->event_data_lock);
}
- usbi_hotplug_match(ctx, message.device, message.event);
+ /* if no further pending events, clear the event pipe */
+ if (!usbi_pending_events(ctx))
+ usbi_clear_event(ctx);
+
+ usbi_mutex_unlock(&ctx->event_data_lock);
+
+ /* process the hotplug message, if any */
+ if (message) {
+ usbi_hotplug_match(ctx, message->device, message->event);
+
+ /* the device left, dereference the device */
+ if (LIBUSB_HOTPLUG_EVENT_DEVICE_LEFT == message->event)
+ libusb_unref_device(message->device);
+
+ free(message);
+ }
- /* the device left. dereference the device */
- if (LIBUSB_HOTPLUG_EVENT_DEVICE_LEFT == message.event)
- libusb_unref_device(message.device);
+ if (ret) {
+ /* return error code */
+ r = ret;
+ goto handled;
+ }
if (0 == --r)
goto handled;
- } /* else there shouldn't be anything on this pipe */
+ }
#ifdef USBI_TIMERFD_AVAILABLE
- /* on timerfd configurations, fds[2] is the timerfd */
- if (usbi_using_timerfd(ctx) && fds[2].revents) {
+ /* on timerfd configurations, fds[1] is the timerfd */
+ if (usbi_using_timerfd(ctx) && fds[1].revents) {
/* timerfd indicates that a timeout has expired */
int ret;
usbi_dbg("timerfd triggered");
struct usbi_transfer *transfer;
struct timespec cur_ts;
struct timeval cur_tv;
- struct timeval *next_timeout;
+ struct timeval next_timeout = { 0, 0 };
int r;
- int found = 0;
USBI_GET_CONTEXT(ctx);
if (usbi_using_timerfd(ctx))
/* find next transfer which hasn't already been processed as timed out */
list_for_each_entry(transfer, &ctx->flying_transfers, list, struct usbi_transfer) {
- if (transfer->flags & (USBI_TRANSFER_TIMED_OUT | USBI_TRANSFER_OS_HANDLES_TIMEOUT))
+ if (transfer->flags & (USBI_TRANSFER_TIMEOUT_HANDLED | USBI_TRANSFER_OS_HANDLES_TIMEOUT))
continue;
- /* no timeout for this transfer? */
+ /* if we've reached transfers of infinte timeout, we're done looking */
if (!timerisset(&transfer->timeout))
- continue;
+ break;
- found = 1;
+ next_timeout = transfer->timeout;
break;
}
usbi_mutex_unlock(&ctx->flying_transfers_lock);
- if (!found) {
+ if (!timerisset(&next_timeout)) {
usbi_dbg("no URB with timeout or all handled by OS; no timeout!");
return 0;
}
- next_timeout = &transfer->timeout;
-
r = usbi_backend->clock_gettime(USBI_CLOCK_MONOTONIC, &cur_ts);
if (r < 0) {
usbi_err(ctx, "failed to read monotonic clock, errno=%d", errno);
}
TIMESPEC_TO_TIMEVAL(&cur_tv, &cur_ts);
- if (!timercmp(&cur_tv, next_timeout, <)) {
+ if (!timercmp(&cur_tv, &next_timeout, <)) {
usbi_dbg("first timeout already expired");
timerclear(tv);
} else {
- timersub(next_timeout, &cur_tv, tv);
+ timersub(&next_timeout, &cur_tv, tv);
usbi_dbg("next timeout in %d.%06ds", tv->tv_sec, tv->tv_usec);
}
ctx->fd_cb_user_data = user_data;
}
+/*
+ * Interrupt the iteration of the event handling thread, so that it picks
+ * up the fd change. Callers of this function must hold the event_data_lock.
+ */
+static void usbi_fd_notification(struct libusb_context *ctx)
+{
+ int pending_events;
+
+ /* Record that there is a new poll fd.
+ * Only signal an event if there are no prior pending events. */
+ pending_events = usbi_pending_events(ctx);
+ ctx->pollfds_modified = 1;
+ if (!pending_events)
+ usbi_signal_event(ctx);
+}
+
/* Add a file descriptor to the list of file descriptors to be monitored.
* events should be specified as a bitmask of events passed to poll(), e.g.
* POLLIN and/or POLLOUT. */
usbi_dbg("add fd %d events %d", fd, events);
ipollfd->pollfd.fd = fd;
ipollfd->pollfd.events = events;
- usbi_mutex_lock(&ctx->pollfds_lock);
+ usbi_mutex_lock(&ctx->event_data_lock);
list_add_tail(&ipollfd->list, &ctx->ipollfds);
ctx->pollfds_cnt++;
- ctx->pollfds_modified = 1;
- usbi_mutex_unlock(&ctx->pollfds_lock);
+ usbi_fd_notification(ctx);
+ usbi_mutex_unlock(&ctx->event_data_lock);
if (ctx->fd_added_cb)
ctx->fd_added_cb(fd, events, ctx->fd_cb_user_data);
int found = 0;
usbi_dbg("remove fd %d", fd);
- usbi_mutex_lock(&ctx->pollfds_lock);
+ usbi_mutex_lock(&ctx->event_data_lock);
list_for_each_entry(ipollfd, &ctx->ipollfds, list, struct usbi_pollfd)
if (ipollfd->pollfd.fd == fd) {
found = 1;
if (!found) {
usbi_dbg("couldn't find fd %d to remove", fd);
- usbi_mutex_unlock(&ctx->pollfds_lock);
+ usbi_mutex_unlock(&ctx->event_data_lock);
return;
}
list_del(&ipollfd->list);
ctx->pollfds_cnt--;
- ctx->pollfds_modified = 1;
- usbi_mutex_unlock(&ctx->pollfds_lock);
+ usbi_fd_notification(ctx);
+ usbi_mutex_unlock(&ctx->event_data_lock);
free(ipollfd);
if (ctx->fd_removed_cb)
ctx->fd_removed_cb(fd, ctx->fd_cb_user_data);
* Retrieve a list of file descriptors that should be polled by your main loop
* as libusb event sources.
*
- * The returned list is NULL-terminated and should be freed with free() when
- * done. The actual list contents must not be touched.
+ * The returned list is NULL-terminated and should be freed with libusb_free_pollfds()
+ * when done. The actual list contents must not be touched.
*
* As file descriptors are a Unix-specific concept, this function is not
* available on Windows and will always return NULL.
size_t i = 0;
USBI_GET_CONTEXT(ctx);
- usbi_mutex_lock(&ctx->pollfds_lock);
+ usbi_mutex_lock(&ctx->event_data_lock);
ret = calloc(ctx->pollfds_cnt + 1, sizeof(struct libusb_pollfd *));
if (!ret)
ret[ctx->pollfds_cnt] = NULL;
out:
- usbi_mutex_unlock(&ctx->pollfds_lock);
+ usbi_mutex_unlock(&ctx->event_data_lock);
return (const struct libusb_pollfd **) ret;
#else
usbi_err(ctx, "external polling of libusb's internal descriptors "\
#endif
}
+/** \ingroup poll
+ * Free a list of libusb_pollfd structures. This should be called for all
+ * pollfd lists allocated with libusb_get_pollfds().
+ *
+ * Since version 1.0.20, \ref LIBUSB_API_VERSION >= 0x01000104
+ *
+ * It is legal to call this function with a NULL pollfd list. In this case,
+ * the function will simply return safely.
+ *
+ * \param pollfds the list of libusb_pollfd structures to free
+ */
+void API_EXPORTED libusb_free_pollfds(const struct libusb_pollfd **pollfds)
+{
+ if (!pollfds)
+ return;
+
+ free((void *)pollfds);
+}
+
/* Backends may call this from handle_events to report disconnection of a
* device. This function ensures transfers get cancelled appropriately.
* Callers of this function must hold the events_lock.
/* terminate all pending transfers with the LIBUSB_TRANSFER_NO_DEVICE
* status code.
*
- * this is a bit tricky because:
- * 1. we can't do transfer completion while holding flying_transfers_lock
- * because the completion handler may try to re-submit the transfer
- * 2. the transfers list can change underneath us - if we were to build a
- * list of transfers to complete (while holding lock), the situation
- * might be different by the time we come to free them
- *
- * so we resort to a loop-based approach as below
- *
- * This is safe because transfers are only removed from the
- * flying_transfer list by usbi_handle_transfer_completion and
- * libusb_close, both of which hold the events_lock while doing so,
- * so usbi_handle_disconnect cannot be running at the same time.
- *
- * Note that libusb_submit_transfer also removes the transfer from
- * the flying_transfer list on submission failure, but it keeps the
- * flying_transfer list locked between addition and removal, so
- * usbi_handle_disconnect never sees such transfers.
+ * when we find a transfer for this device on the list, there are two
+ * possible scenarios:
+ * 1. the transfer is currently in-flight, in which case we terminate the
+ * transfer here
+ * 2. the transfer is not in-flight (or is but hasn't been marked as such),
+ * in which case we record that the device disappeared and this will be
+ * handled by libusb_submit_transfer()
*/
while (1) {
- usbi_mutex_lock(&HANDLE_CTX(handle)->flying_transfers_lock);
to_cancel = NULL;
+ usbi_mutex_lock(&HANDLE_CTX(handle)->flying_transfers_lock);
list_for_each_entry(cur, &HANDLE_CTX(handle)->flying_transfers, list, struct usbi_transfer)
if (USBI_TRANSFER_TO_LIBUSB_TRANSFER(cur)->dev_handle == handle) {
- to_cancel = cur;
- break;
+ usbi_mutex_lock(&cur->flags_lock);
+ if (cur->flags & USBI_TRANSFER_IN_FLIGHT)
+ to_cancel = cur;
+ else
+ cur->flags |= USBI_TRANSFER_DEVICE_DISAPPEARED;
+ usbi_mutex_unlock(&cur->flags_lock);
+
+ if (to_cancel)
+ break;
}
usbi_mutex_unlock(&HANDLE_CTX(handle)->flying_transfers_lock);
usbi_dbg("cancelling transfer %p from disconnect",
USBI_TRANSFER_TO_LIBUSB_TRANSFER(to_cancel));
+ usbi_mutex_lock(&to_cancel->lock);
usbi_backend->clear_transfer_priv(to_cancel);
+ usbi_mutex_unlock(&to_cancel->lock);
usbi_handle_transfer_completion(to_cancel, LIBUSB_TRANSFER_NO_DEVICE);
}