ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
- --with-target-subdir=SUBDIR Configuring in a subdirectory"
+ --with-target-subdir=SUBDIR Configuring in a subdirectory for target"
+ac_help="$ac_help
+ --with-build-subdir=SUBDIR Configuring in a subdirectory for build"
ac_help="$ac_help
--with-cross-host=HOST Configuring with a cross compiler"
ac_help="$ac_help
--with-newlib Configuring with newlib"
+ac_help="$ac_help
+ --enable-maintainer-mode
+ enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer"
+ac_help="$ac_help
+ --enable-install-libiberty Install headers for end users"
# Initialize some variables set by options.
# The variables have the same names as the options, with
program_transform_name=s,x,x,
silent=
site=
+sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
+ --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
+ -site-file | --site-file | --site-fil | --site-fi | --site-f)
+ ac_prev=sitefile ;;
+ -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+ sitefile="$ac_optarg" ;;
+
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
fi
+else
+ CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
+# This works around the fact that libtool configuration may change LD
+# for this particular configuration, but some shells, instead of
+# keeping the changes in LD private, export them just because LD is
+# exported. We don't use libtool yet, but some day we might, so...
+ORIGINAL_LD_FOR_MULTILIBS=$LD
+
# Check whether --with-target-subdir or --without-target-subdir was given.
if test "${with_target_subdir+set}" = set; then
withval="$with_target_subdir"
:
fi
+# Check whether --with-build-subdir or --without-build-subdir was given.
+if test "${with_build_subdir+set}" = set; then
+ withval="$with_build_subdir"
+ :
+fi
+
# Check whether --with-cross-host or --without-cross-host was given.
if test "${with_cross_host+set}" = set; then
withval="$with_cross_host"
if test "${srcdir}" = "."; then
- if test -z "${with_target_subdir}"; then
+ if test -n "${with_build_subdir}"; then
+ libiberty_topdir="${srcdir}/../.."
+ with_target_subdir=
+ elif test -z "${with_target_subdir}"; then
libiberty_topdir="${srcdir}/.."
else
if test "${with_target_subdir}" != "."; then
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:620: checking whether to enable maintainer-specific portions of Makefiles" >&5
+ # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+ enableval="$enable_maintainer_mode"
+ maintainer_mode=$enableval
+else
+ maintainer_mode=no
+fi
+
+
+echo "$ac_t""$maintainer_mode" 1>&6
+
+if test "$maintainer_mode" = "yes"; then
+ MAINT=''
+ NOTMAINT='#'
+else
+ MAINT='#'
+ NOTMAINT=''
+fi
+
+# Do we have a single-tree copy of texinfo? Even if we do, we can't
+# rely on it - libiberty is built before texinfo.
+# Extract the first word of "makeinfo", so it can be a program name with args.
+set dummy makeinfo; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:645: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$MAKEINFO"; then
+ ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_MAKEINFO="makeinfo"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+MAKEINFO="$ac_cv_prog_MAKEINFO"
+if test -n "$MAKEINFO"; then
+ echo "$ac_t""$MAKEINFO" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test "x$MAKEINFO" = "x"; then
+ MAKEINFO="@echo makeinfo missing; true"
+ BUILD_INFO=
+else
+ BUILD_INFO=info
+ case x"`$MAKEINFO --version | grep 'GNU texinfo'`" in
+ x*\ [1-3].* )
+ MAKEINFO="@echo $MAKEINFO is too old, 4.0 or newer required; true"
+ BUILD_INFO=
+ echo "configure: warning:
+*** Makeinfo is too old. Info documentation will not be built." 1>&2
+ ;;
+ esac
+fi
+
+
+
+# Extract the first word of "perl", so it can be a program name with args.
+set dummy perl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:691: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_PERL'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$PERL"; then
+ ac_cv_prog_PERL="$PERL" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_PERL="perl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+PERL="$ac_cv_prog_PERL"
+if test -n "$PERL"; then
+ echo "$ac_t""$PERL" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test x"$PERL" = x""; then
+ HAVE_PERL='#'
+else
+ HAVE_PERL=''
+fi
+
+
+
# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:591: checking host system type" >&5
+echo "configure:731: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:614: checking build system type" >&5
+echo "configure:754: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:640: checking for $ac_word" >&5
+echo "configure:780: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:672: checking for $ac_word" >&5
+echo "configure:812: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:704: checking for $ac_word" >&5
+echo "configure:844: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
-# FIXME: We temporarily define our own version of AC_PROG_CC. This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable. This should really be fixed in autoconf
-# itself.
-
-
-
-
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:750: checking for $ac_word" >&5
+echo "configure:881: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:780: checking for $ac_word" >&5
+echo "configure:911: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:829: checking whether we are using GNU C" >&5
+echo "configure:960: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:838: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:969: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:854: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:985: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:884: checking for POSIXized ISC" >&5
+echo "configure:1016: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
ISC=
fi
+echo $ac_n "checking for working const""... $ac_c" 1>&6
+echo "configure:1037: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1042 "configure"
+#include "confdefs.h"
+
+int main() {
+
+/* Ultrix mips cc rejects this. */
+typedef int charset[2]; const charset x;
+/* SunOS 4.1.1 cc rejects this. */
+char const *const *ccp;
+char **p;
+/* NEC SVR4.0.2 mips cc rejects this. */
+struct point {int x, y;};
+static struct point const zero = {0,0};
+/* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in an arm
+ of an if-expression whose if-part is not a constant expression */
+const char *g = "string";
+ccp = &g + (g ? g-g : 0);
+/* HPUX 7.0 cc rejects these. */
+++ccp;
+p = (char**) ccp;
+ccp = (char const *const *) p;
+{ /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+}
+{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+}
+{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+}
+{ /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+}
+{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+}
+
+; return 0; }
+EOF
+if { (eval echo configure:1091: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_const=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_c_const=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_const" 1>&6
+if test $ac_cv_c_const = no; then
+ cat >> confdefs.h <<\EOF
+#define const
+EOF
+
+fi
+
+echo $ac_n "checking for inline""... $ac_c" 1>&6
+echo "configure:1112: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat > conftest.$ac_ext <<EOF
+#line 1119 "configure"
+#include "confdefs.h"
+
+int main() {
+} $ac_kw foo() {
+; return 0; }
+EOF
+if { (eval echo configure:1126: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_c_inline=$ac_kw; break
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+
+fi
+
+echo "$ac_t""$ac_cv_c_inline" 1>&6
+case "$ac_cv_c_inline" in
+ inline | yes) ;;
+ no) cat >> confdefs.h <<\EOF
+#define inline
+EOF
+ ;;
+ *) cat >> confdefs.h <<EOF
+#define inline $ac_cv_c_inline
+EOF
+ ;;
+esac
+
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:922: checking for a BSD compatible install" >&5
+echo "configure:1169: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# able to link anything, it had better be able to at least compile
# something.
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:983: checking how to run the C preprocessor" >&5
+echo "configure:1230: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 998 "configure"
+#line 1245 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1004: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1251: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1015 "configure"
+#line 1262 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1021: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1268: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1032 "configure"
+#line 1279 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1038: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1285: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
fi
echo "$ac_t""$CPP" 1>&6
-for ac_hdr in sys/file.h sys/param.h limits.h stdlib.h string.h unistd.h strings.h sys/time.h time.h sys/resource.h sys/stat.h sys/mman.h fcntl.h
+for ac_hdr in sys/file.h sys/param.h limits.h stdlib.h string.h unistd.h strings.h sys/time.h time.h sys/resource.h sys/stat.h sys/mman.h fcntl.h alloca.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1066: checking for $ac_hdr" >&5
+echo "configure:1313: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1071 "configure"
+#line 1318 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1076: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1323: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:1103: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:1350: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1108 "configure"
+#line 1355 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:1124: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1371: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1145: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:1392: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1150 "configure"
+#line 1397 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:1159: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1406: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
echo $ac_n "checking whether errno must be declared""... $ac_c" 1>&6
-echo "configure:1181: checking whether errno must be declared" >&5
+echo "configure:1428: checking whether errno must be declared" >&5
if eval "test \"`echo '$''{'libiberty_cv_declare_errno'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1186 "configure"
+#line 1433 "configure"
#include "confdefs.h"
#include <errno.h>
int main() {
int x = errno;
; return 0; }
EOF
-if { (eval echo configure:1193: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1440: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
libiberty_cv_declare_errno=no
else
fi
-# This is the list of functions which libiberty will provide if they
-# are not available on the host.
-
-funcs="asprintf"
-funcs="$funcs atexit"
-funcs="$funcs basename"
-funcs="$funcs bcmp"
-funcs="$funcs bcopy"
-funcs="$funcs bzero"
-funcs="$funcs calloc"
-funcs="$funcs clock"
-funcs="$funcs getcwd"
-funcs="$funcs getpagesize"
-funcs="$funcs index"
-funcs="$funcs insque"
-funcs="$funcs memchr"
-funcs="$funcs memcmp"
-funcs="$funcs memcpy"
-funcs="$funcs memmove"
-funcs="$funcs memset"
-funcs="$funcs mkstemps"
-funcs="$funcs putenv"
-funcs="$funcs random"
-funcs="$funcs rename"
-funcs="$funcs rindex"
-funcs="$funcs setenv"
-funcs="$funcs sigsetmask"
-funcs="$funcs strcasecmp"
-funcs="$funcs strchr"
-funcs="$funcs strdup"
-funcs="$funcs strncasecmp"
-funcs="$funcs strrchr"
-funcs="$funcs strstr"
-funcs="$funcs strtod"
-funcs="$funcs strtol"
-funcs="$funcs strtoul"
-funcs="$funcs tmpnam"
-funcs="$funcs vasprintf"
-funcs="$funcs vfprintf"
-funcs="$funcs vprintf"
-funcs="$funcs vsprintf"
-funcs="$funcs waitpid"
-
-# Also in the old function.def file: alloca, vfork, getopt.
-
-vars="sys_errlist sys_nerr sys_siglist"
-
-checkfuncs="getrusage on_exit psignal strerror strsignal sysconf times sbrk gettimeofday"
-
-# These are neither executed nor required, but they help keep
-# autoheader happy without adding a bunch of text to acconfig.h.
-if test "x" = "y"; then
- for ac_func in asprintf atexit basename bcmp bcopy bzero calloc clock getcwd
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1269: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+echo "configure:1462: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1274 "configure"
+#line 1467 "configure"
#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
-; return 0; }
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
EOF
-if { (eval echo configure:1297: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1475: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
+ ac_cv_header_stdc=yes
else
+ echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
+ ac_cv_header_stdc=no
fi
rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 1492 "configure"
+#include "confdefs.h"
+#include <string.h>
EOF
-
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "memchr" >/dev/null 2>&1; then
+ :
else
- echo "$ac_t""no" 1>&6
+ rm -rf conftest*
+ ac_cv_header_stdc=no
fi
-done
-
- for ac_func in getpagesize index insque mkstemps memchr memcmp memcpy memmove
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1324: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1329 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
+rm -f conftest*
-int main() {
+fi
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 1510 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "free" >/dev/null 2>&1; then
+ :
+else
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+if test "$cross_compiling" = yes; then
+ :
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1531 "configure"
+#include "confdefs.h"
+#include <ctype.h>
+#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int main () { int i; for (i = 0; i < 256; i++)
+if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+exit (0); }
+
+EOF
+if { (eval echo configure:1542: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_header_stdc=no
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_header_stdc" 1>&6
+if test $ac_cv_header_stdc = yes; then
+ cat >> confdefs.h <<\EOF
+#define STDC_HEADERS 1
+EOF
+
+fi
+
+echo $ac_n "checking for uintptr_t""... $ac_c" 1>&6
+echo "configure:1566: checking for uintptr_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_uintptr_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1571 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "(^|[^a-zA-Z_0-9])uintptr_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_uintptr_t=yes
+else
+ rm -rf conftest*
+ ac_cv_type_uintptr_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_uintptr_t" 1>&6
+if test $ac_cv_type_uintptr_t = no; then
+ cat >> confdefs.h <<\EOF
+#define uintptr_t unsigned long
+EOF
+
+fi
+
+
+if test $ac_cv_type_uintptr_t = yes
+then
+ cat >> confdefs.h <<\EOF
+#define HAVE_UINTPTR_T 1
+EOF
+
+fi
+
+echo $ac_n "checking for pid_t""... $ac_c" 1>&6
+echo "configure:1608: checking for pid_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1613 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_pid_t=yes
+else
+ rm -rf conftest*
+ ac_cv_type_pid_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_pid_t" 1>&6
+if test $ac_cv_type_pid_t = no; then
+ cat >> confdefs.h <<\EOF
+#define pid_t int
+EOF
+
+fi
+
+
+# This is the list of functions which libiberty will provide if they
+# are not available on the host.
+
+funcs="asprintf"
+funcs="$funcs atexit"
+funcs="$funcs basename"
+funcs="$funcs bcmp"
+funcs="$funcs bcopy"
+funcs="$funcs bsearch"
+funcs="$funcs bzero"
+funcs="$funcs calloc"
+funcs="$funcs clock"
+funcs="$funcs ffs"
+funcs="$funcs getcwd"
+funcs="$funcs getpagesize"
+funcs="$funcs index"
+funcs="$funcs insque"
+funcs="$funcs memchr"
+funcs="$funcs memcmp"
+funcs="$funcs memcpy"
+funcs="$funcs memmove"
+funcs="$funcs memset"
+funcs="$funcs mkstemps"
+funcs="$funcs putenv"
+funcs="$funcs random"
+funcs="$funcs rename"
+funcs="$funcs rindex"
+funcs="$funcs setenv"
+funcs="$funcs sigsetmask"
+funcs="$funcs strcasecmp"
+funcs="$funcs strchr"
+funcs="$funcs strdup"
+funcs="$funcs strncasecmp"
+funcs="$funcs strrchr"
+funcs="$funcs strstr"
+funcs="$funcs strtod"
+funcs="$funcs strtol"
+funcs="$funcs strtoul"
+funcs="$funcs tmpnam"
+funcs="$funcs vasprintf"
+funcs="$funcs vfprintf"
+funcs="$funcs vprintf"
+funcs="$funcs vsprintf"
+funcs="$funcs waitpid"
+
+# Also in the old function.def file: alloca, vfork, getopt.
+
+vars="sys_errlist sys_nerr sys_siglist"
+
+checkfuncs="getrusage on_exit psignal strerror strsignal sysconf times sbrk gettimeofday"
+
+# These are neither executed nor required, but they help keep
+# autoheader happy without adding a bunch of text to acconfig.h.
+if test "x" = "y"; then
+ for ac_func in asprintf atexit basename bcmp bcopy bsearch bzero calloc clock
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:1698: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1703 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
; return 0; }
EOF
-if { (eval echo configure:1352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1726: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
- for ac_func in memset putenv random rename rindex sigsetmask strcasecmp
+ for ac_func in getcwd getpagesize index insque mkstemps memchr memcmp memcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1379: checking for $ac_func" >&5
+echo "configure:1753: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1384 "configure"
+#line 1758 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1407: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1781: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
- for ac_func in setenv strchr strdup strncasecmp strrchr strstr strtod strtol
+ for ac_func in memmove memset putenv random rename rindex sigsetmask
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1434: checking for $ac_func" >&5
+echo "configure:1808: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1439 "configure"
+#line 1813 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1462: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1836: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
- for ac_func in strtoul tmpnam vasprintf vfprintf vprintf vsprintf waitpid
+ for ac_func in strcasecmp setenv strchr strdup strncasecmp strrchr strstr
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1489: checking for $ac_func" >&5
+echo "configure:1863: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1494 "configure"
+#line 1868 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1891: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_ERRLIST 1
-EOF
+ for ac_func in strtod strtol strtoul tmpnam vasprintf vfprintf vprintf
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:1918: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1923 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_NERR 1
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
EOF
+if { (eval echo configure:1946: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_SIGLIST 1
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
- for ac_func in getrusage on_exit psignal strerror strsignal sysconf times
+ for ac_func in vsprintf waitpid getrusage on_exit psignal strerror strsignal
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1556: checking for $ac_func" >&5
+echo "configure:1973: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1561 "configure"
+#line 1978 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1584: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2001: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
- for ac_func in sbrk gettimeofday
+ for ac_func in sysconf times sbrk gettimeofday ffs
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1611: checking for $ac_func" >&5
+echo "configure:2028: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1616 "configure"
+#line 2033 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1639: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2056: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
+ cat >> confdefs.h <<\EOF
+#define HAVE_SYS_ERRLIST 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define HAVE_SYS_NERR 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define HAVE_SYS_SIGLIST 1
+EOF
+
fi
# For each of these functions, if the host does not provide the
# function we want to put FN.o in LIBOBJS, and if the host does
-# provide the function, we want to define HAVE_FN in config.h. Also,
-# if the host does not provide alloca, we set ALLOCA to alloca.o
+# provide the function, we want to define HAVE_FN in config.h.
setobjs=
CHECK=
+target_header_dir=
if test -n "${with_target_subdir}"; then
# We are being configured as a target library. AC_REPLACE_FUNCS
# newlib provide and which ones we will be expected to provide.
if test "x${with_newlib}" = "xyes"; then
- ALLOCA="alloca.o"
LIBOBJS="asprintf.o basename.o insque.o random.o strdup.o vasprintf.o"
for f in $funcs; do
fi
+ # We may wish to install the target headers somewhere.
+ # Check whether --enable-install-libiberty or --disable-install-libiberty was given.
+if test "${enable_install_libiberty+set}" = set; then
+ enableval="$enable_install_libiberty"
+ enable_install_libiberty=$enableval
+else
+ enable_install_libiberty=no
+fi
+
+ # Option parsed, now set things appropriately.
+ case x"$enable_install_libiberty" in
+ xyes|x)
+ target_header_dir=libiberty
+ ;;
+ xno)
+ target_header_dir=
+ ;;
+ *)
+ # This could be sanity-checked in various ways...
+ target_header_dir="${enable_install_libiberty}"
+ ;;
+ esac
+
+
else
# Not a target library, so we set things up to run the test suite.
+
+case "${host}" in
+ *-*-cygwin* | *-*-mingw*)
+ cat >> confdefs.h <<\EOF
+#define HAVE_SYS_ERRLIST 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define HAVE_SYS_NERR 1
+EOF
+
+ ;;
+esac
+
if test -z "${setobjs}"; then
case "${host}" in
# provides from our shell variables, so that they appear to be
# missing.
- funcs="`echo $funcs | sed -e 's/random//'`"
- LIBOBJS="$LIBOBJS random.o"
- vars="`echo $vars | sed -e 's/sys_siglist//'`"
- checkfuncs="`echo $checkfuncs | sed -e 's/strsignal//' -e 's/psignal//'`"
+ # DJ - only if we're *building* cygwin, not just building *with* cygwin
+
+ if test -n "${with_target_subdir}"
+ then
+ funcs="`echo $funcs | sed -e 's/random//'`"
+ LIBOBJS="$LIBOBJS random.o"
+ vars="`echo $vars | sed -e 's/sys_siglist//'`"
+ checkfuncs="`echo $checkfuncs | sed -e 's/strsignal//' -e 's/psignal//'`"
+ fi
;;
*-*-mingw32*)
# Under mingw32, sys_nerr and sys_errlist exist, but they are
# macros, so the test below won't find them.
- vars="`echo $vars | sed -e 's/sys_nerr//' -e 's/sys_errlist//'`"
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_NERR 1
-EOF
-
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_ERRLIST 1
-EOF
-
+ libiberty_cv_var_sys_nerr=yes
+ libiberty_cv_var_sys_errlist=yes
;;
*-*-uwin*)
# Under uwin 2.0+, sys_nerr and sys_errlist exist, but they are
# macros (actually, these are imported from a DLL, but the end effect
# is the same), so the test below won't find them.
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_NERR 1
-EOF
-
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_ERRLIST 1
-EOF
+ libiberty_cv_var_sys_nerr=yes
+ libiberty_cv_var_sys_errlist=yes
+ ;;
+ *-*-*vms*)
+ # Under VMS, vfork works very different than on Unix. The standard test
+ # won't work, and it isn't easily adaptable. It makes more sense to
+ # just force it.
+ ac_cv_func_vfork_works=yes
;;
esac
# We haven't set the list of objects yet. Use the standard autoconf
# tests. This will only work if the compiler works.
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1821: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2286: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1832 "configure"
+#line 2297 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1837: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1863: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2328: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
for ac_func in $funcs
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1870: checking for $ac_func" >&5
+echo "configure:2335: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1875 "configure"
+#line 2340 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1898: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2363: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-LIBOBJS="$LIBOBJS ${ac_func}.${ac_objext}"
-fi
-done
-
-
-
- case "${host}" in
- *-*-interix)
- # On Interix, it wrongly concludes that the MSVC compiler supports alloca.
- # (MSVC does on Win32, not on Interix.)
- # This should be temporary.
-
- ac_cv_header_alloca_h=no
- ac_cv_func_alloca_works=no
- ALLOCA=alloca.o
- cat >> confdefs.h <<\EOF
-#define C_ALLOCA 1
-EOF
- cat >> confdefs.h <<EOF
-#define STACK_DIRECTION -1
-EOF
- ;;
- *)
- # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
-# for constant arguments. Useless!
-echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:1945: checking for working alloca.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1950 "configure"
-#include "confdefs.h"
-#include <alloca.h>
-int main() {
-char *p = alloca(2 * sizeof(int));
-; return 0; }
-EOF
-if { (eval echo configure:1957: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_cv_header_alloca_h=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_alloca_h=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
-if test $ac_cv_header_alloca_h = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_ALLOCA_H 1
-EOF
-
-fi
-
-echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:1978: checking for alloca" >&5
-if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1983 "configure"
-#include "confdefs.h"
-
-#ifdef __GNUC__
-# define alloca __builtin_alloca
-#else
-# ifdef _MSC_VER
-# include <malloc.h>
-# define alloca _alloca
-# else
-# if HAVE_ALLOCA_H
-# include <alloca.h>
-# else
-# ifdef _AIX
- #pragma alloca
-# else
-# ifndef alloca /* predefined by HP cc +Olibcalls */
-char *alloca ();
-# endif
-# endif
-# endif
-# endif
-#endif
-
-int main() {
-char *p = (char *) alloca(1);
-; return 0; }
-EOF
-if { (eval echo configure:2011: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_cv_func_alloca_works=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_func_alloca_works=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
-if test $ac_cv_func_alloca_works = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_ALLOCA 1
-EOF
-
-fi
-
-if test $ac_cv_func_alloca_works = no; then
- # The SVR3 libPW and SVR4 libucb both contain incompatible functions
- # that cause trouble. Some versions do not even contain alloca or
- # contain a buggy version. If you still want to use their alloca,
- # use ar to extract alloca.o from them instead of compiling alloca.c.
- ALLOCA=alloca.${ac_objext}
- cat >> confdefs.h <<\EOF
-#define C_ALLOCA 1
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
EOF
+
+else
+ echo "$ac_t""no" 1>&6
+LIBOBJS="$LIBOBJS ${ac_func}.${ac_objext}"
+fi
+done
-echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2043: checking whether alloca needs Cray hooks" >&5
+ echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
+echo "configure:2390: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2048 "configure"
+#line 2395 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
echo "$ac_t""$ac_cv_os_cray" 1>&6
if test $ac_cv_os_cray = yes; then
-for ac_func in _getb67 GETB67 getb67; do
- echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2073: checking for $ac_func" >&5
+ for ac_func in _getb67 GETB67 getb67; do
+ echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2420: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2078 "configure"
+#line 2425 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2101: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2448: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
cat >> confdefs.h <<EOF
#define CRAY_STACKSEG_END $ac_func
EOF
-
break
else
echo "$ac_t""no" 1>&6
fi
-done
+ done
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2128: checking stack direction for C alloca" >&5
+echo "configure:2474: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 2136 "configure"
+#line 2482 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:2155: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2501: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
#define STACK_DIRECTION $ac_cv_c_stack_direction
EOF
-fi
-
- ;;
- esac
-
- echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2180: checking for ANSI C header files" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2185 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2193: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- ac_cv_header_stdc=yes
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 2210 "configure"
-#include "confdefs.h"
-#include <string.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "memchr" >/dev/null 2>&1; then
- :
-else
- rm -rf conftest*
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 2228 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "free" >/dev/null 2>&1; then
- :
-else
- rm -rf conftest*
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-if test "$cross_compiling" = yes; then
- :
-else
- cat > conftest.$ac_ext <<EOF
-#line 2249 "configure"
-#include "confdefs.h"
-#include <ctype.h>
-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int main () { int i; for (i = 0; i < 256; i++)
-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
-exit (0); }
-
-EOF
-if { (eval echo configure:2260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- :
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_header_stdc=no
-fi
-rm -fr conftest*
-fi
-
-fi
-fi
-
-echo "$ac_t""$ac_cv_header_stdc" 1>&6
-if test $ac_cv_header_stdc = yes; then
- cat >> confdefs.h <<\EOF
-#define STDC_HEADERS 1
-EOF
-
-fi
-
-echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2284: checking for pid_t" >&5
-if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2289 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#include <stddef.h>
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
- rm -rf conftest*
- ac_cv_type_pid_t=yes
-else
- rm -rf conftest*
- ac_cv_type_pid_t=no
-fi
-rm -f conftest*
-
-fi
-echo "$ac_t""$ac_cv_type_pid_t" 1>&6
-if test $ac_cv_type_pid_t = no; then
- cat >> confdefs.h <<\EOF
-#define pid_t int
-EOF
-
-fi
-ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
+ ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:2318: checking for vfork.h" >&5
+echo "configure:2523: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2323 "configure"
+#line 2528 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2328: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2533: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:2353: checking for working vfork" >&5
+echo "configure:2558: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:2359: checking for vfork" >&5
+echo "configure:2564: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2364 "configure"
+#line 2569 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
; return 0; }
EOF
-if { (eval echo configure:2387: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
ac_cv_func_vfork_works=$ac_cv_func_vfork
else
cat > conftest.$ac_ext <<EOF
-#line 2409 "configure"
+#line 2614 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
}
}
EOF
-if { (eval echo configure:2504: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
if test $ac_cv_func_vfork_works = no; then
LIBOBJS="$LIBOBJS vfork.o"
fi
+ # We only need _doprnt if we might use it to implement v*printf.
+ if test $ac_cv_func_vprintf != yes \
+ || test $ac_cv_func_vfprintf != yes \
+ || test $ac_cv_func_vsprintf != yes; then
+ for ac_func in _doprnt
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2741: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2746 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2769: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+LIBOBJS="$LIBOBJS ${ac_func}.${ac_objext}"
+fi
+done
+
+
+ else
+ for ac_func in _doprnt
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2799: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2804 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2827: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ fi
+
for v in $vars; do
echo $ac_n "checking for $v""... $ac_c" 1>&6
-echo "configure:2531: checking for $v" >&5
+echo "configure:2855: checking for $v" >&5
if eval "test \"`echo '$''{'libiberty_cv_var_$v'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2536 "configure"
+#line 2860 "configure"
#include "confdefs.h"
int *p;
int main() {
-extern int $v; p = &$v;
+extern int $v []; p = &$v;
; return 0; }
EOF
-if { (eval echo configure:2543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2867: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "libiberty_cv_var_$v=yes"
else
for ac_func in $checkfuncs
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2569: checking for $ac_func" >&5
+echo "configure:2893: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2574 "configure"
+#line 2898 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2597: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2627: checking for $ac_hdr" >&5
+echo "configure:2951: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2632 "configure"
+#line 2956 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2637: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2961: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2666: checking for $ac_func" >&5
+echo "configure:2990: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2671 "configure"
+#line 2995 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2694: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2719: checking for working mmap" >&5
+echo "configure:3043: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 2727 "configure"
+#line 3051 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:2867: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3191: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
echo $ac_n "checking for working strncmp""... $ac_c" 1>&6
-echo "configure:2891: checking for working strncmp" >&5
+echo "configure:3215: checking for working strncmp" >&5
if eval "test \"`echo '$''{'ac_cv_func_strncmp_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_strncmp_works=no
else
cat > conftest.$ac_ext <<EOF
-#line 2899 "configure"
+#line 3223 "configure"
#include "confdefs.h"
/* Test by Jim Wilson and Kaveh Ghazi.
p = (char *) mmap (0, MAP_LEN, PROT_READ|PROT_WRITE,
MAP_ANON|MAP_PRIVATE, dev_zero, 0);
if (p == (char *)-1)
+ p = (char *) mmap (0, MAP_LEN, PROT_READ|PROT_WRITE,
+ MAP_ANON|MAP_PRIVATE, -1, 0);
+ if (p == (char *)-1)
exit (2);
else
{
}
EOF
-if { (eval echo configure:2960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3287: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_strncmp_works=yes
else
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
+s%@MAINT@%$MAINT%g
+s%@NOTMAINT@%$NOTMAINT%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@BUILD_INFO@%$BUILD_INFO%g
+s%@PERL@%$PERL%g
+s%@HAVE_PERL@%$HAVE_PERL%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@build_os@%$build_os%g
s%@AR@%$AR%g
s%@RANLIB@%$RANLIB%g
-s%@ac_libiberty_warn_cflags@%$ac_libiberty_warn_cflags%g
s%@CC@%$CC%g
+s%@ac_libiberty_warn_cflags@%$ac_libiberty_warn_cflags%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@host_makefile_frag@%%g
s%@CPP@%$CPP%g
s%@CHECK@%$CHECK%g
+s%@target_header_dir@%$target_header_dir%g
s%@LIBOBJS@%$LIBOBJS%g
-s%@ALLOCA@%$ALLOCA%g
s%@INSTALL_DEST@%$INSTALL_DEST%g
CEOF
host=${host}
target=${target}
with_target_subdir=${with_target_subdir}
+with_build_subdir=${with_build_subdir}
with_multisubdir=${with_multisubdir}
ac_configure_args="--enable-multilib ${ac_configure_args}"
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
if test -n "$CONFIG_FILES"; then
- if test -n "${with_target_subdir}"; then
+ if test -n "${with_build_subdir}" || test -n "${with_target_subdir}"; then
# FIXME: We shouldn't need to set ac_file
ac_file=Makefile
+ LD="${ORIGINAL_LD_FOR_MULTILIBS}"
. ${libiberty_topdir}/config-ml.in
fi
fi
projects / external / binutils.git / blobdiff