Merge branch 'testing' into working

[platform/kernel/u-boot.git] / lib_ppc / board.c

diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 24e8e97..163aaeb 100644 (file)
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -35,13 +35,13 @@
 #ifdef CONFIG_MPC5xxx
 #include <mpc5xxx.h>
 #endif
-#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(CONFIG_CMD_IDE)
 #include <ide.h>
 #endif
-#if (CONFIG_COMMANDS & CFG_CMD_SCSI)
+#if defined(CONFIG_CMD_SCSI)
 #include <scsi.h>
 #endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #include <kgdb.h>
 #endif
 #ifdef CONFIG_STATUS_LED
@@ -76,18 +76,18 @@
 extern int update_flash_size (int flash_size);
 #endif
 
-#if defined(CONFIG_SOLIDCARD3)
+#if defined(CONFIG_SC3)
 extern void sc3_read_eeprom(void);
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+#if defined(CONFIG_CMD_DOC)
 void doc_init (void);
 #endif
 #if defined(CONFIG_HARD_I2C) || \
     defined(CONFIG_SOFT_I2C)
 #include <i2c.h>
 #endif
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
 void nand_init (void);
 #endif
 
@@ -118,7 +118,7 @@ extern ulong __init_end;
 extern ulong _end;
 ulong monitor_flash_len;
 
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+#if defined(CONFIG_CMD_BEDBUG)
 #include <bedbug/type.h>
 #endif
 
@@ -139,10 +139,10 @@ static    ulong   mem_malloc_brk   = 0;
  */
 static void mem_malloc_init (void)
 {
-       ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off;
-
-       mem_malloc_end = dest_addr;
-       mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN;
+#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+       mem_malloc_end = CFG_MONITOR_BASE + gd->reloc_off;
+#endif
+       mem_malloc_start = mem_malloc_end - TOTAL_MALLOC_LEN;
        mem_malloc_brk = mem_malloc_start;
 
        memset ((void *) mem_malloc_start,
@@ -310,10 +310,6 @@ init_fnc_t *init_sequence[] = {
        prt_8260_clks,
 #endif /* CONFIG_8260 */
 
-#if defined(CONFIG_MPC83XX)
-       print_clock_conf,
-#endif
-
        checkcpu,
 #if defined(CONFIG_MPC5xxx)
        prt_mpc5xxx_clks,
@@ -568,7 +564,9 @@ void board_init_f (ulong bootflag)
 
        bd->bi_procfreq = gd->cpu_clk;  /* Processor Speed, In Hz */
        bd->bi_plb_busfreq = gd->bus_clk;
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
+    defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
        bd->bi_pci_busfreq = get_PCI_freq ();
        bd->bi_opbfreq = get_OPB_freq ();
 #elif defined(CONFIG_XILINX_ML300)
@@ -622,7 +620,13 @@ void board_init_r (gd_t *id, ulong dest_addr)
        bd = gd->bd;
 
        gd->flags |= GD_FLG_RELOC;      /* tell others: relocation done */
+
+#if defined(CONFIG_RELOC_FIXUP_WORKS)
+       gd->reloc_off = 0;
+       mem_malloc_end = dest_addr;
+#else
        gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
+#endif
 
 #ifdef CONFIG_SERIAL_MULTI
        serial_initialize();
@@ -781,7 +785,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
        spi_init_r ();
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
        WATCHDOG_RESET ();
        puts ("NAND:  ");
        nand_init();            /* go init the NAND */
@@ -822,7 +826,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif /* CONFIG_405GP, CONFIG_405EP */
 #endif /* CFG_EXTBDINFO */
 
-#if defined(CONFIG_SOLIDCARD3)
+#if defined(CONFIG_SC3)
        sc3_read_eeprom();
 #endif
        s = getenv ("ethaddr");
@@ -898,7 +902,8 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 #if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \
     defined(CONFIG_TQM8272) || \
-    defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
+    defined(CONFIG_CCM) || defined(CONFIG_KUP4K) || \
+    defined(CONFIG_KUP4X) || defined(CONFIG_PCS440EP)
        load_sernum_ethaddr ();
 #endif
        /* IP Address */
@@ -931,7 +936,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
     defined(CONFIG_KUP4X)      || \
     defined(CONFIG_LWMON)      || \
     defined(CONFIG_PCU_E)      || \
-    defined(CONFIG_SOLIDCARD3) || \
+    defined(CONFIG_SC3)                || \
     defined(CONFIG_W7O)                || \
     defined(CONFIG_MISC_INIT_R)
        /* miscellaneous platform dependent initialisations */
@@ -943,7 +948,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
                hermes_start_lxt980 ((int) bd->bi_ethspeed);
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
        WATCHDOG_RESET ();
        puts ("KGDB:  ");
        kgdb_init ();
@@ -963,7 +968,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
        serial_buffered_init();
 #endif
 
-#ifdef CONFIG_STATUS_LED
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
        status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
 #endif
 
@@ -975,27 +980,27 @@ void board_init_r (gd_t *id, ulong dest_addr)
        if ((s = getenv ("loadaddr")) != NULL) {
                load_addr = simple_strtoul (s, NULL, 16);
        }
-#if (CONFIG_COMMANDS & CFG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
        if ((s = getenv ("bootfile")) != NULL) {
                copy_filename (BootFile, s, sizeof (BootFile));
        }
-#endif /* CFG_CMD_NET */
+#endif
 
        WATCHDOG_RESET ();
 
-#if (CONFIG_COMMANDS & CFG_CMD_SCSI)
+#if defined(CONFIG_CMD_SCSI)
        WATCHDOG_RESET ();
        puts ("SCSI:  ");
        scsi_init ();
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+#if defined(CONFIG_CMD_DOC)
        WATCHDOG_RESET ();
        puts ("DOC:   ");
        doc_init ();
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
 #if defined(CONFIG_NET_MULTI)
        WATCHDOG_RESET ();
        puts ("Net:   ");
@@ -1003,7 +1008,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
        eth_initialize (bd);
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && ( \
+#if defined(CONFIG_CMD_NET) && ( \
     defined(CONFIG_CCM)                || \
     defined(CONFIG_ELPT860)    || \
     defined(CONFIG_EP8260)     || \
@@ -1028,13 +1033,14 @@ void board_init_r (gd_t *id, ulong dest_addr)
        post_run (NULL, POST_RAM | post_bootmode_get(0));
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) && !(CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(CONFIG_CMD_PCMCIA) \
+    && !defined(CONFIG_CMD_IDE)
        WATCHDOG_RESET ();
        puts ("PCMCIA:");
        pcmcia_init ();
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(CONFIG_CMD_IDE)
        WATCHDOG_RESET ();
 # ifdef        CONFIG_IDE_8xx_PCCARD
        puts ("PCMCIA:");
@@ -1047,7 +1053,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #else
        ide_init ();
 #endif
-#endif /* CFG_CMD_IDE */
+#endif
 
 #ifdef CONFIG_LAST_STAGE_INIT
        WATCHDOG_RESET ();
@@ -1059,7 +1065,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
        last_stage_init ();
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+#if defined(CONFIG_CMD_BEDBUG)
        WATCHDOG_RESET ();
        bedbug_init ();
 #endif