#include <common.h>
#include <command.h>
#include <malloc.h>
+#include <timestamp.h>
#include <version.h>
#include <watchdog.h>
DECLARE_GLOBAL_DATA_PTR;
-const char version_string[] = U_BOOT_VERSION " (" __DATE__ " - " __TIME__ ")";
+const char version_string[] = U_BOOT_VERSION " ("U_BOOT_DATE" - "U_BOOT_TIME")";
-#ifdef CFG_GPIO_0
+#ifdef CONFIG_SYS_GPIO_0
extern int gpio_init (void);
#endif
-#ifdef CFG_INTC_0
+#ifdef CONFIG_SYS_INTC_0
extern int interrupts_init (void);
#endif
#if defined(CONFIG_CMD_NET)
/*
* The Malloc area is immediately below the monitor copy in DRAM
- * aka CFG_MONITOR_BASE - Note there is no need for reloc_off
+ * aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off
* as our monitory code is run from SDRAM
*/
static void mem_malloc_init (void)
{
- mem_malloc_end = (CFG_MALLOC_BASE + CFG_MALLOC_LEN);
- mem_malloc_start = CFG_MALLOC_BASE;
+ mem_malloc_end = (CONFIG_SYS_MALLOC_BASE + CONFIG_SYS_MALLOC_LEN);
+ mem_malloc_start = CONFIG_SYS_MALLOC_BASE;
mem_malloc_brk = mem_malloc_start;
memset ((void *)mem_malloc_start, 0, mem_malloc_end - mem_malloc_start);
}
init_fnc_t *init_sequence[] = {
env_init,
serial_init,
-#ifdef CFG_GPIO_0
+#ifdef CONFIG_SYS_GPIO_0
gpio_init,
#endif
-#ifdef CFG_INTC_0
+#ifdef CONFIG_SYS_INTC_0
interrupts_init,
#endif
NULL,
{
bd_t *bd;
init_fnc_t **init_fnc_ptr;
- gd = (gd_t *) CFG_GBL_DATA_OFFSET;
+ gd = (gd_t *) CONFIG_SYS_GBL_DATA_OFFSET;
#if defined(CONFIG_CMD_FLASH)
ulong flash_size = 0;
#endif
+#if defined(CONFIG_CMD_NET)
+ char *s, *e;
+ int i;
+#endif
asm ("nop"); /* FIXME gd is not initialize - wait */
- memset ((void *)gd, 0, CFG_GBL_DATA_SIZE);
+ memset ((void *)gd, 0, CONFIG_SYS_GBL_DATA_SIZE);
gd->bd = (bd_t *) (gd + 1); /* At end of global data */
gd->baudrate = CONFIG_BAUDRATE;
bd = gd->bd;
bd->bi_baudrate = CONFIG_BAUDRATE;
- bd->bi_memstart = CFG_SDRAM_BASE;
- bd->bi_memsize = CFG_SDRAM_SIZE;
+ bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+ bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+ gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
/* Initialise malloc() area */
mem_malloc_init ();
}
}
+ puts ("SDRAM :\n");
+ printf ("\t\tIcache:%s\n", icache_status() ? "OK" : "FAIL");
+ printf ("\t\tDcache:%s\n", dcache_status() ? "OK" : "FAIL");
+ printf ("\tU-Boot Start:0x%08x\n", TEXT_BASE);
+
#if defined(CONFIG_CMD_FLASH)
- bd->bi_flashstart = CFG_FLASH_BASE;
+ puts ("FLASH: ");
+ bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
if (0 < (flash_size = flash_init ())) {
bd->bi_flashsize = flash_size;
- bd->bi_flashoffset = CFG_FLASH_BASE + flash_size;
+ bd->bi_flashoffset = CONFIG_SYS_FLASH_BASE + flash_size;
+# ifdef CONFIG_SYS_FLASH_CHECKSUM
+ print_size (flash_size, "");
+ /*
+ * Compute and print flash CRC if flashchecksum is set to 'y'
+ *
+ * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
+ */
+ s = getenv ("flashchecksum");
+ if (s && (*s == 'y')) {
+ printf (" CRC: %08X",
+ crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
+ );
+ }
+ putc ('\n');
+# else /* !CONFIG_SYS_FLASH_CHECKSUM */
+ print_size (flash_size, "\n");
+# endif /* CONFIG_SYS_FLASH_CHECKSUM */
} else {
puts ("Flash init FAILED");
bd->bi_flashstart = 0;
#endif
#if defined(CONFIG_CMD_NET)
- char *s, *e;
- int i;
/* board MAC address */
s = getenv ("ethaddr");
+ printf ("MAC:%s\n",s);
for (i = 0; i < 6; ++i) {
bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
if (s)