* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
- * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+ * Copyright (C) 1998 - 2018, Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
- * are also available at http://curl.haxx.se/docs/copyright.html.
+ * are also available at https://curl.haxx.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
#include "curl_setup.h"
+#ifdef HAVE_NETINET_IN_H
+#include <netinet/in.h>
+#endif
+
+#ifdef HAVE_LINUX_TCP_H
+#include <linux/tcp.h>
+#endif
+
#include <curl/curl.h>
+#ifdef USE_TIZEN_FEATURE_DLP
+#include "extensions/curl_extensions.h"
+#endif
#include "urldata.h"
#include "sendf.h"
#include "connect.h"
#include "vtls/vtls.h"
#include "ssh.h"
+#include "easyif.h"
#include "multiif.h"
#include "non-ascii.h"
-
-#define _MPRINTF_REPLACE /* use the internal *printf() functions */
-#include <curl/mprintf.h>
-
-#include "curl_memory.h"
#include "strerror.h"
+#include "select.h"
+#include "strdup.h"
-/* The last #include file should be: */
+/* The last 3 #include files should be in this order */
+#include "curl_printf.h"
+#include "curl_memory.h"
#include "memdebug.h"
#ifdef CURL_DO_LINEEND_CONV
* blocks of data. Remaining, bare CRs are changed to LFs. The possibly new
* size of the data is returned.
*/
-static size_t convert_lineends(struct SessionHandle *data,
+static size_t convert_lineends(struct Curl_easy *data,
char *startPtr, size_t size)
{
char *inPtr, *outPtr;
/* sanity check */
if((startPtr == NULL) || (size < 1)) {
- return(size);
+ return size;
}
if(data->state.prev_block_had_trailing_cr) {
if(*startPtr == '\n') {
/* This block of incoming data starts with the
previous block's LF so get rid of it */
- memmove(startPtr, startPtr+1, size-1);
+ memmove(startPtr, startPtr + 1, size-1);
size--;
/* and it wasn't a bare CR but a CRLF conversion instead */
data->state.crlf_conversions++;
inPtr = outPtr = memchr(startPtr, '\r', size);
if(inPtr) {
/* at least one CR, now look for CRLF */
- while(inPtr < (startPtr+size-1)) {
+ while(inPtr < (startPtr + size-1)) {
/* note that it's size-1, so we'll never look past the last byte */
if(memcmp(inPtr, "\r\n", 2) == 0) {
/* CRLF found, bump past the CR and copy the NL */
inPtr++;
} /* end of while loop */
- if(inPtr < startPtr+size) {
+ if(inPtr < startPtr + size) {
/* handle last byte */
if(*inPtr == '\r') {
/* deal with a CR at the end of the buffer */
}
outPtr++;
}
- if(outPtr < startPtr+size)
+ if(outPtr < startPtr + size)
/* tidy up by null terminating the now shorter data */
*outPtr = '\0';
- return(outPtr - startPtr);
+ return (outPtr - startPtr);
}
- return(size);
+ return size;
}
#endif /* CURL_DO_LINEEND_CONV */
+#ifdef USE_RECV_BEFORE_SEND_WORKAROUND
+bool Curl_recv_has_postponed_data(struct connectdata *conn, int sockindex)
+{
+ struct postponed_data * const psnd = &(conn->postponed[sockindex]);
+ return psnd->buffer && psnd->allocated_size &&
+ psnd->recv_size > psnd->recv_processed;
+}
+
+static void pre_receive_plain(struct connectdata *conn, int num)
+{
+ const curl_socket_t sockfd = conn->sock[num];
+ struct postponed_data * const psnd = &(conn->postponed[num]);
+ size_t bytestorecv = psnd->allocated_size - psnd->recv_size;
+ /* WinSock will destroy unread received data if send() is
+ failed.
+ To avoid lossage of received data, recv() must be
+ performed before every send() if any incoming data is
+ available. However, skip this, if buffer is already full. */
+ if((conn->handler->protocol&PROTO_FAMILY_HTTP) != 0 &&
+ conn->recv[num] == Curl_recv_plain &&
+ (!psnd->buffer || bytestorecv)) {
+ const int readymask = Curl_socket_check(sockfd, CURL_SOCKET_BAD,
+ CURL_SOCKET_BAD, 0);
+ if(readymask != -1 && (readymask & CURL_CSELECT_IN) != 0) {
+ /* Have some incoming data */
+ if(!psnd->buffer) {
+ /* Use buffer double default size for intermediate buffer */
+ psnd->allocated_size = 2 * conn->data->set.buffer_size;
+ psnd->buffer = malloc(psnd->allocated_size);
+ psnd->recv_size = 0;
+ psnd->recv_processed = 0;
+#ifdef DEBUGBUILD
+ psnd->bindsock = sockfd; /* Used only for DEBUGASSERT */
+#endif /* DEBUGBUILD */
+ bytestorecv = psnd->allocated_size;
+ }
+ if(psnd->buffer) {
+ ssize_t recvedbytes;
+ DEBUGASSERT(psnd->bindsock == sockfd);
+ recvedbytes = sread(sockfd, psnd->buffer + psnd->recv_size,
+ bytestorecv);
+ if(recvedbytes > 0)
+ psnd->recv_size += recvedbytes;
+ }
+ else
+ psnd->allocated_size = 0;
+ }
+ }
+}
+
+static ssize_t get_pre_recved(struct connectdata *conn, int num, char *buf,
+ size_t len)
+{
+ struct postponed_data * const psnd = &(conn->postponed[num]);
+ size_t copysize;
+ if(!psnd->buffer)
+ return 0;
+
+ DEBUGASSERT(psnd->allocated_size > 0);
+ DEBUGASSERT(psnd->recv_size <= psnd->allocated_size);
+ DEBUGASSERT(psnd->recv_processed <= psnd->recv_size);
+ /* Check and process data that already received and storied in internal
+ intermediate buffer */
+ if(psnd->recv_size > psnd->recv_processed) {
+ DEBUGASSERT(psnd->bindsock == conn->sock[num]);
+ copysize = CURLMIN(len, psnd->recv_size - psnd->recv_processed);
+ memcpy(buf, psnd->buffer + psnd->recv_processed, copysize);
+ psnd->recv_processed += copysize;
+ }
+ else
+ copysize = 0; /* buffer was allocated, but nothing was received */
+
+ /* Free intermediate buffer if it has no unprocessed data */
+ if(psnd->recv_processed == psnd->recv_size) {
+ free(psnd->buffer);
+ psnd->buffer = NULL;
+ psnd->allocated_size = 0;
+ psnd->recv_size = 0;
+ psnd->recv_processed = 0;
+#ifdef DEBUGBUILD
+ psnd->bindsock = CURL_SOCKET_BAD;
+#endif /* DEBUGBUILD */
+ }
+ return (ssize_t)copysize;
+}
+#else /* ! USE_RECV_BEFORE_SEND_WORKAROUND */
+/* Use "do-nothing" macros instead of functions when workaround not used */
+bool Curl_recv_has_postponed_data(struct connectdata *conn, int sockindex)
+{
+ (void)conn;
+ (void)sockindex;
+ return false;
+}
+#define pre_receive_plain(c,n) do {} WHILE_FALSE
+#define get_pre_recved(c,n,b,l) 0
+#endif /* ! USE_RECV_BEFORE_SEND_WORKAROUND */
+
/* Curl_infof() is for info message along the way */
-void Curl_infof(struct SessionHandle *data, const char *fmt, ...)
+void Curl_infof(struct Curl_easy *data, const char *fmt, ...)
{
if(data && data->set.verbose) {
va_list ap;
* The message SHALL NOT include any LF or CR.
*/
-void Curl_failf(struct SessionHandle *data, const char *fmt, ...)
+void Curl_failf(struct Curl_easy *data, const char *fmt, ...)
{
- va_list ap;
- size_t len;
- va_start(ap, fmt);
-
- vsnprintf(data->state.buffer, BUFSIZE, fmt, ap);
+ if(data->set.verbose || data->set.errorbuffer) {
+ va_list ap;
+ size_t len;
+ char error[CURL_ERROR_SIZE + 2];
+ va_start(ap, fmt);
+ vsnprintf(error, CURL_ERROR_SIZE, fmt, ap);
+ len = strlen(error);
- if(data->set.errorbuffer && !data->state.errorbuf) {
- snprintf(data->set.errorbuffer, CURL_ERROR_SIZE, "%s", data->state.buffer);
- data->state.errorbuf = TRUE; /* wrote error string */
- }
- if(data->set.verbose) {
- len = strlen(data->state.buffer);
- if(len < BUFSIZE - 1) {
- data->state.buffer[len] = '\n';
- data->state.buffer[++len] = '\0';
+ if(data->set.errorbuffer && !data->state.errorbuf) {
+ strcpy(data->set.errorbuffer, error);
+ data->state.errorbuf = TRUE; /* wrote error string */
+ }
+ if(data->set.verbose) {
+ error[len] = '\n';
+ error[++len] = '\0';
+ Curl_debug(data, CURLINFO_TEXT, error, len, NULL);
}
- Curl_debug(data, CURLINFO_TEXT, data->state.buffer, len, NULL);
+ va_end(ap);
}
-
- va_end(ap);
}
-/* Curl_sendf() sends formated data to the server */
+/* Curl_sendf() sends formatted data to the server */
CURLcode Curl_sendf(curl_socket_t sockfd, struct connectdata *conn,
const char *fmt, ...)
{
- struct SessionHandle *data = conn->data;
+ struct Curl_easy *data = conn->data;
ssize_t bytes_written;
size_t write_len;
CURLcode result = CURLE_OK;
if(!s)
return CURLE_OUT_OF_MEMORY; /* failure */
- bytes_written=0;
+ bytes_written = 0;
write_len = strlen(s);
sptr = s;
CURLcode result = CURLE_OK;
int num = (sockfd == conn->sock[SECONDARYSOCKET]);
+#ifdef USE_TIZEN_FEATURE_DLP
+ /**
+ * Send data to Tizen DLP verification
+ */
+ curl_extensions_tizen_dlp_check_leak(conn->host.dispname, (char *const)mem,
+ len);
+#endif
+
bytes_written = conn->send[num](conn, num, mem, len, &result);
*written = bytes_written;
const void *mem, size_t len, CURLcode *code)
{
curl_socket_t sockfd = conn->sock[num];
- ssize_t bytes_written = swrite(sockfd, mem, len);
+ ssize_t bytes_written;
+ /* WinSock will destroy unread received data if send() is
+ failed.
+ To avoid lossage of received data, recv() must be
+ performed before every send() if any incoming data is
+ available. */
+ pre_receive_plain(conn, num);
+
+#if defined(MSG_FASTOPEN) && !defined(TCP_FASTOPEN_CONNECT) /* Linux */
+ if(conn->bits.tcp_fastopen) {
+ bytes_written = sendto(sockfd, mem, len, MSG_FASTOPEN,
+ conn->ip_addr->ai_addr, conn->ip_addr->ai_addrlen);
+ conn->bits.tcp_fastopen = FALSE;
+ }
+ else
+#endif
+ bytes_written = swrite(sockfd, mem, len);
*code = CURLE_OK;
if(-1 == bytes_written) {
(WSAEWOULDBLOCK == err)
#else
/* errno may be EWOULDBLOCK or on some systems EAGAIN when it returned
- due to its inability to send off data without blocking. We therefor
+ due to its inability to send off data without blocking. We therefore
treat both error codes the same here */
- (EWOULDBLOCK == err) || (EAGAIN == err) || (EINTR == err)
+ (EWOULDBLOCK == err) || (EAGAIN == err) || (EINTR == err) ||
+ (EINPROGRESS == err)
#endif
) {
/* this is just a case of EWOULDBLOCK */
- bytes_written=0;
+ bytes_written = 0;
*code = CURLE_AGAIN;
}
else {
size_t len, CURLcode *code)
{
curl_socket_t sockfd = conn->sock[num];
- ssize_t nread = sread(sockfd, buf, len);
+ ssize_t nread;
+ /* Check and return data that already received and storied in internal
+ intermediate buffer */
+ nread = get_pre_recved(conn, num, buf, len);
+ if(nread > 0) {
+ *code = CURLE_OK;
+ return nread;
+ }
+
+ nread = sread(sockfd, buf, len);
*code = CURLE_OK;
if(-1 == nread) {
(WSAEWOULDBLOCK == err)
#else
/* errno may be EWOULDBLOCK or on some systems EAGAIN when it returned
- due to its inability to send off data without blocking. We therefor
+ due to its inability to send off data without blocking. We therefore
treat both error codes the same here */
(EWOULDBLOCK == err) || (EAGAIN == err) || (EINTR == err)
#endif
return nread;
}
-static CURLcode pausewrite(struct SessionHandle *data,
+static CURLcode pausewrite(struct Curl_easy *data,
int type, /* what type of data */
const char *ptr,
size_t len)
we want to send we need to dup it to save a copy for when the sending
is again enabled */
struct SingleRequest *k = &data->req;
- char *dupl = malloc(len);
- if(!dupl)
- return CURLE_OUT_OF_MEMORY;
+ struct UrlState *s = &data->state;
+ char *dupl;
+ unsigned int i;
+ bool newtype = TRUE;
+
+ if(s->tempcount) {
+ for(i = 0; i< s->tempcount; i++) {
+ if(s->tempwrite[i].type == type) {
+ /* data for this type exists */
+ newtype = FALSE;
+ break;
+ }
+ }
+ DEBUGASSERT(i < 3);
+ }
+ else
+ i = 0;
- memcpy(dupl, ptr, len);
+ if(!newtype) {
+ /* append new data to old data */
- /* store this information in the state struct for later use */
- data->state.tempwrite = dupl;
- data->state.tempwritesize = len;
- data->state.tempwritetype = type;
+ /* figure out the new size of the data to save */
+ size_t newlen = len + s->tempwrite[i].len;
+ /* allocate the new memory area */
+ char *newptr = realloc(s->tempwrite[i].buf, newlen);
+ if(!newptr)
+ return CURLE_OUT_OF_MEMORY;
+ /* copy the new data to the end of the new area */
+ memcpy(newptr + s->tempwrite[i].len, ptr, len);
+
+ /* update the pointer and the size */
+ s->tempwrite[i].buf = newptr;
+ s->tempwrite[i].len = newlen;
+ }
+ else {
+ dupl = Curl_memdup(ptr, len);
+ if(!dupl)
+ return CURLE_OUT_OF_MEMORY;
+
+ /* store this information in the state struct for later use */
+ s->tempwrite[i].buf = dupl;
+ s->tempwrite[i].len = len;
+ s->tempwrite[i].type = type;
+
+ if(newtype)
+ s->tempcount++;
+ }
/* mark the connection as RECV paused */
k->keepon |= KEEP_RECV_PAUSE;
- DEBUGF(infof(data, "Pausing with %zu bytes in buffer for type %02x\n",
+ DEBUGF(infof(data, "Paused %zu bytes in buffer for type %02x\n",
len, type));
return CURLE_OK;
}
-/* Curl_client_chop_write() writes chunks of data not larger than
- * CURL_MAX_WRITE_SIZE via client write callback(s) and
- * takes care of pause requests from the callbacks.
+/* chop_write() writes chunks of data not larger than CURL_MAX_WRITE_SIZE via
+ * client write callback(s) and takes care of pause requests from the
+ * callbacks.
*/
-CURLcode Curl_client_chop_write(struct connectdata *conn,
- int type,
- char * ptr,
- size_t len)
+static CURLcode chop_write(struct connectdata *conn,
+ int type,
+ char *optr,
+ size_t olen)
{
- struct SessionHandle *data = conn->data;
+ struct Curl_easy *data = conn->data;
curl_write_callback writeheader = NULL;
curl_write_callback writebody = NULL;
+ char *ptr = optr;
+ size_t len = olen;
if(!len)
return CURLE_OK;
- /* If reading is actually paused, we're forced to append this chunk of data
- to the already held data, but only if it is the same type as otherwise it
- can't work and it'll return error instead. */
- if(data->req.keepon & KEEP_RECV_PAUSE) {
- size_t newlen;
- char *newptr;
- if(type != data->state.tempwritetype)
- /* major internal confusion */
- return CURLE_RECV_ERROR;
-
- DEBUGASSERT(data->state.tempwrite);
-
- /* figure out the new size of the data to save */
- newlen = len + data->state.tempwritesize;
- /* allocate the new memory area */
- newptr = realloc(data->state.tempwrite, newlen);
- if(!newptr)
- return CURLE_OUT_OF_MEMORY;
- /* copy the new data to the end of the new area */
- memcpy(newptr + data->state.tempwritesize, ptr, len);
- /* update the pointer and the size */
- data->state.tempwrite = newptr;
- data->state.tempwritesize = newlen;
- return CURLE_OK;
- }
+ /* If reading is paused, append this data to the already held data for this
+ type. */
+ if(data->req.keepon & KEEP_RECV_PAUSE)
+ return pausewrite(data, type, ptr, len);
/* Determine the callback(s) to use. */
if(type & CLIENTWRITE_BODY)
failf(data, "Write callback asked for PAUSE when not supported!");
return CURLE_WRITE_ERROR;
}
- else
- return pausewrite(data, type, ptr, len);
+ return pausewrite(data, type, ptr, len);
}
- else if(wrote != chunklen) {
- failf(data, "Failed writing body (%zu != %zu)", wrote, chunklen);
- return CURLE_WRITE_ERROR;
- }
- }
-
- if(writeheader) {
- size_t wrote = writeheader(ptr, 1, chunklen, data->set.writeheader);
-
- if(CURL_WRITEFUNC_PAUSE == wrote)
- /* here we pass in the HEADER bit only since if this was body as well
- then it was passed already and clearly that didn't trigger the
- pause, so this is saved for later with the HEADER bit only */
- return pausewrite(data, CLIENTWRITE_HEADER, ptr, len);
-
if(wrote != chunklen) {
- failf (data, "Failed writing header");
+ failf(data, "Failed writing body (%zu != %zu)", wrote, chunklen);
return CURLE_WRITE_ERROR;
}
}
len -= chunklen;
}
+ if(writeheader) {
+ size_t wrote;
+ ptr = optr;
+ len = olen;
+ Curl_set_in_callback(data, true);
+ wrote = writeheader(ptr, 1, len, data->set.writeheader);
+ Curl_set_in_callback(data, false);
+
+ if(CURL_WRITEFUNC_PAUSE == wrote)
+ /* here we pass in the HEADER bit only since if this was body as well
+ then it was passed already and clearly that didn't trigger the
+ pause, so this is saved for later with the HEADER bit only */
+ return pausewrite(data, CLIENTWRITE_HEADER, ptr, len);
+
+ if(wrote != len) {
+ failf(data, "Failed writing header");
+ return CURLE_WRITE_ERROR;
+ }
+ }
+
return CURLE_OK;
}
char *ptr,
size_t len)
{
- struct SessionHandle *data = conn->data;
+ struct Curl_easy *data = conn->data;
if(0 == len)
len = strlen(ptr);
+ DEBUGASSERT(type <= 3);
+
/* FTP data may need conversion. */
if((type & CLIENTWRITE_BODY) &&
(conn->handler->protocol & PROTO_FAMILY_FTP) &&
#endif /* CURL_DO_LINEEND_CONV */
}
- return Curl_client_chop_write(conn, type, ptr, len);
+ return chop_write(conn, type, ptr, len);
}
CURLcode Curl_read_plain(curl_socket_t sockfd,
if(-1 == nread) {
int err = SOCKERRNO;
+ int return_error;
#ifdef USE_WINSOCK
- if(WSAEWOULDBLOCK == err)
+ return_error = WSAEWOULDBLOCK == err;
#else
- if((EWOULDBLOCK == err) || (EAGAIN == err) || (EINTR == err))
+ return_error = EWOULDBLOCK == err || EAGAIN == err || EINTR == err;
#endif
+ if(return_error)
return CURLE_AGAIN;
- else
- return CURLE_RECV_ERROR;
+ return CURLE_RECV_ERROR;
}
/* we only return number of bytes read when we return OK */
ssize_t nread = 0;
size_t bytesfromsocket = 0;
char *buffertofill = NULL;
- bool pipelining = Curl_multi_pipeline_enabled(conn->data->multi);
+ struct Curl_easy *data = conn->data;
+
+ /* if HTTP/1 pipelining is both wanted and possible */
+ bool pipelining = Curl_pipeline_wanted(data->multi, CURLPIPE_HTTP1) &&
+ (conn->bundle->multiuse == BUNDLE_PIPELINING);
/* Set 'num' to 0 or 1, depending on which socket that has been sent here.
If it is the second socket, we set num to 1. Otherwise to 0. This lets
us use the correct ssl handle. */
int num = (sockfd == conn->sock[SECONDARYSOCKET]);
- *n=0; /* reset amount to zero */
+ *n = 0; /* reset amount to zero */
/* If session can pipeline, check connection buffer */
if(pipelining) {
}
/* If we come here, it means that there is no data to read from the buffer,
* so we read from the socket */
- bytesfromsocket = CURLMIN(sizerequested, BUFSIZE * sizeof (char));
+ bytesfromsocket = CURLMIN(sizerequested, MASTERBUF_SIZE);
buffertofill = conn->master_buffer;
}
else {
- bytesfromsocket = CURLMIN((long)sizerequested,
- conn->data->set.buffer_size ?
- conn->data->set.buffer_size : BUFSIZE);
+ bytesfromsocket = CURLMIN(sizerequested, (size_t)data->set.buffer_size);
buffertofill = buf;
}
}
/* return 0 on success */
-static int showit(struct SessionHandle *data, curl_infotype type,
+static int showit(struct Curl_easy *data, curl_infotype type,
char *ptr, size_t size)
{
static const char s_infotype[CURLINFO_END][3] = {
"* ", "< ", "> ", "{ ", "} ", "{ ", "} " };
+ int rc = 0;
#ifdef CURL_DOES_CONVERSIONS
- char buf[BUFSIZE+1];
+ char *buf = NULL;
size_t conv_size = 0;
switch(type) {
case CURLINFO_HEADER_OUT:
- /* assume output headers are ASCII */
- /* copy the data into my buffer so the original is unchanged */
- if(size > BUFSIZE) {
- size = BUFSIZE; /* truncate if necessary */
- buf[BUFSIZE] = '\0';
- }
+ buf = Curl_memdup(ptr, size);
+ if(!buf)
+ return 1;
conv_size = size;
- memcpy(buf, ptr, size);
+
/* Special processing is needed for this block if it
* contains both headers and data (separated by CRLFCRLF).
* We want to convert just the headers, leaving the data as-is.
}
#endif /* CURL_DOES_CONVERSIONS */
- if(data->set.fdebug)
- return (*data->set.fdebug)(data, type, ptr, size,
- data->set.debugdata);
-
- switch(type) {
- case CURLINFO_TEXT:
- case CURLINFO_HEADER_OUT:
- case CURLINFO_HEADER_IN:
- fwrite(s_infotype[type], 2, 1, data->set.err);
- fwrite(ptr, size, 1, data->set.err);
+ if(data->set.fdebug) {
+ Curl_set_in_callback(data, true);
+ rc = (*data->set.fdebug)(data, type, ptr, size, data->set.debugdata);
+ Curl_set_in_callback(data, false);
+ }
+ else {
+ switch(type) {
+ case CURLINFO_TEXT:
+ case CURLINFO_HEADER_OUT:
+ case CURLINFO_HEADER_IN:
+ fwrite(s_infotype[type], 2, 1, data->set.err);
+ fwrite(ptr, size, 1, data->set.err);
#ifdef CURL_DOES_CONVERSIONS
- if(size != conv_size) {
- /* we had untranslated data so we need an explicit newline */
- fwrite("\n", 1, 1, data->set.err);
- }
+ if(size != conv_size) {
+ /* we had untranslated data so we need an explicit newline */
+ fwrite("\n", 1, 1, data->set.err);
+ }
#endif
- break;
- default: /* nada */
- break;
+ break;
+ default: /* nada */
+ break;
+ }
}
- return 0;
+#ifdef CURL_DOES_CONVERSIONS
+ free(buf);
+#endif
+ return rc;
}
-int Curl_debug(struct SessionHandle *data, curl_infotype type,
+int Curl_debug(struct Curl_easy *data, curl_infotype type,
char *ptr, size_t size,
struct connectdata *conn)
{
int rc;
if(data->set.printhost && conn && conn->host.dispname) {
char buffer[160];
- const char *t=NULL;
- const char *w="Data";
- switch (type) {
+ const char *t = NULL;
+ const char *w = "Data";
+ switch(type) {
case CURLINFO_HEADER_IN:
w = "Header";
/* FALLTHROUGH */
projects / platform / upstream / curl.git / blobdiff