#include <common.h>
#include <hexdump.h>
+#include <mapmem.h>
#include <linux/ctype.h>
#include <linux/compat.h>
#include <linux/log2.h>
#include <asm/unaligned.h>
+#define MAX_LINE_LENGTH_BYTES 64
+
const char hex_asc[] = "0123456789abcdef";
const char hex_asc_upper[] = "0123456789ABCDEF";
-#ifdef CONFIG_HEXDUMP
-/**
- * hex_dump_to_buffer - convert a blob of data to "hex ASCII" in memory
- * @buf: data blob to dump
- * @len: number of bytes in the @buf
- * @rowsize: number of bytes to print per line; must be 16 or 32
- * @groupsize: number of bytes to print at a time (1, 2, 4, 8; default = 1)
- * @linebuf: where to put the converted data
- * @linebuflen: total size of @linebuf, including space for terminating NUL
- * @ascii: include ASCII after the hex output
- *
- * hex_dump_to_buffer() works on one "line" of output at a time, i.e.,
- * 16 or 32 bytes of input data converted to hex + ASCII output.
- *
- * Given a buffer of u8 data, hex_dump_to_buffer() converts the input data
- * to a hex + ASCII dump at the supplied memory location.
- * The converted output is always NUL-terminated.
- *
- * E.g.:
- * hex_dump_to_buffer(frame->data, frame->len, 16, 1,
- * linebuf, sizeof(linebuf), true);
- *
- * example output buffer:
- * 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f @ABCDEFGHIJKLMNO
- *
- * Return:
- * The amount of bytes placed in the buffer without terminating NUL. If the
- * output was truncated, then the return value is the number of bytes
- * (excluding the terminating NUL) which would have been written to the final
- * string if enough space had been available.
- */
+#if CONFIG_IS_ENABLED(HEXDUMP)
int hex_dump_to_buffer(const void *buf, size_t len, int rowsize, int groupsize,
char *linebuf, size_t linebuflen, bool ascii)
{
int ascii_column;
int ret;
- if (rowsize != 16 && rowsize != 32)
+ if (!rowsize)
rowsize = 16;
+ else
+ rowsize = min(rowsize, MAX_LINE_LENGTH_BYTES);
if (len > rowsize) /* limit to one line at a time */
len = rowsize;
return ascii ? ascii_column + len : (groupsize * 2 + 1) * ngroups - 1;
}
-/**
- * print_hex_dump - print a text hex dump to syslog for a binary blob of data
- * @prefix_str: string to prefix each line with;
- * caller supplies trailing spaces for alignment if desired
- * @prefix_type: controls whether prefix of an offset, address, or none
- * is printed (%DUMP_PREFIX_OFFSET, %DUMP_PREFIX_ADDRESS, %DUMP_PREFIX_NONE)
- * @rowsize: number of bytes to print per line; must be 16 or 32
- * @groupsize: number of bytes to print at a time (1, 2, 4, 8; default = 1)
- * @buf: data blob to dump
- * @len: number of bytes in the @buf
- * @ascii: include ASCII after the hex output
- *
- * Given a buffer of u8 data, print_hex_dump() prints a hex + ASCII dump
- * to the stdio, with an optional leading prefix.
- *
- * print_hex_dump() works on one "line" of output at a time, i.e.,
- * 16 or 32 bytes of input data converted to hex + ASCII output.
- * print_hex_dump() iterates over the entire input @buf, breaking it into
- * "line size" chunks to format and print.
- *
- * E.g.:
- * print_hex_dump("raw data: ", DUMP_PREFIX_ADDRESS, 16, 1, frame->data,
- * frame->len, true);
- *
- * Example output using %DUMP_PREFIX_OFFSET and 1-byte mode:
- * 0009ab42: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f @ABCDEFGHIJKLMNO
- * Example output using %DUMP_PREFIX_ADDRESS and 4-byte mode:
- * ffffffff88089af0: 73727170 77767574 7b7a7978 7f7e7d7c pqrstuvwxyz{|}~.
- */
-void print_hex_dump(const char *prefix_str, int prefix_type, int rowsize,
- int groupsize, const void *buf, size_t len, bool ascii)
+int print_hex_dump(const char *prefix_str, int prefix_type, int rowsize,
+ int groupsize, const void *buf, size_t len, bool ascii)
{
const u8 *ptr = buf;
int i, linelen, remaining = len;
- char linebuf[32 * 3 + 2 + 32 + 1];
+ char linebuf[MAX_LINE_LENGTH_BYTES * 3 + 2 + MAX_LINE_LENGTH_BYTES + 1];
- if (rowsize != 16 && rowsize != 32)
+ if (!rowsize)
rowsize = 16;
+ else
+ rowsize = min(rowsize, MAX_LINE_LENGTH_BYTES);
for (i = 0; i < len; i += rowsize) {
linelen = min(remaining, rowsize);
switch (prefix_type) {
case DUMP_PREFIX_ADDRESS:
- printf("%s%p: %s\n", prefix_str, ptr + i, linebuf);
+ printf("%s%0*lx: %s\n", prefix_str,
+ IS_ENABLED(CONFIG_PHYS_64BIT) ? 16 : 8,
+ (ulong)map_to_sysmem(ptr) + i, linebuf);
break;
case DUMP_PREFIX_OFFSET:
printf("%s%.8x: %s\n", prefix_str, i, linebuf);
printf("%s%s\n", prefix_str, linebuf);
break;
}
+ if (!IS_ENABLED(CONFIG_SPL_BUILD) && ctrlc())
+ return -EINTR;
}
+
+ return 0;
}
-/**
- * print_hex_dump_bytes - shorthand form of print_hex_dump() with default params
- * @prefix_str: string to prefix each line with;
- * caller supplies trailing spaces for alignment if desired
- * @prefix_type: controls whether prefix of an offset, address, or none
- * is printed (%DUMP_PREFIX_OFFSET, %DUMP_PREFIX_ADDRESS, %DUMP_PREFIX_NONE)
- * @buf: data blob to dump
- * @len: number of bytes in the @buf
- *
- * Calls print_hex_dump(), rowsize of 16, groupsize of 1,
- * and ASCII output included.
- */
void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
const void *buf, size_t len)
{
* Some code in U-Boot copy-pasted from Linux kernel uses both
* functions below so to keep stuff compilable we keep these stubs here.
*/
-void print_hex_dump(const char *prefix_str, int prefix_type,
- int rowsize, int groupsize, const void *buf,
- size_t len, bool ascii)
+int print_hex_dump(const char *prefix_str, int prefix_type, int rowsize,
+ int groupsize, const void *buf, size_t len, bool ascii)
{
+ return -ENOSYS;
}
void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
- const void *buf, size_t len)
+ const void *buf, size_t len)
{
}
#endif /* CONFIG_HEXDUMP */
projects / platform / kernel / u-boot.git / blobdiff