#ifndef USE_HOSTCC
#include <common.h>
#include <boot_fit.h>
+#include <display_options.h>
#include <dm.h>
#include <hang.h>
#include <init.h>
COMPAT(ALTERA_SOCFPGA_CLK_INIT, "altr,socfpga-a10-clk-init")
};
+static const char *const fdt_src_name[] = {
+ [FDTSRC_SEPARATE] = "separate",
+ [FDTSRC_FIT] = "fit",
+ [FDTSRC_BOARD] = "board",
+ [FDTSRC_EMBED] = "embed",
+ [FDTSRC_ENV] = "env",
+};
+
+const char *fdtdec_get_srcname(void)
+{
+ return fdt_src_name[gd->fdt_src];
+}
+
const char *fdtdec_get_compatible(enum fdt_compat_id id)
{
/* We allow reading of the 'unknown' ID for testing purposes */
barnum = (barnum - PCI_BASE_ADDRESS_0) / 4;
- /*
- * There is a strange toolchain bug with nds32 which complains about
- * an undefined reference here, even if fdtdec_get_pci_bar32() is never
- * called. An #ifdef seems to be the only fix!
- */
-#if !IS_ENABLED(CONFIG_NDS32)
*bar = dm_pci_read_bar32(dev, barnum);
-#endif
return 0;
}
* Adding an extra check to distinguish DT nodes with
* same name
*/
- if (IS_ENABLED(CONFIG_PHANDLE_CHECK_SEQ)) {
- if (fdt_get_phandle(blob, offset) !=
- fdt_get_phandle(blob, fdt_path_offset(blob, prop)))
- continue;
- }
+ if (offset != fdt_path_offset(blob, prop))
+ continue;
val = trailing_strtol(name);
if (val != -1) {
* @param min_len minimum property length in bytes
* @param err 0 if ok, or -FDT_ERR_NOTFOUND if the property is not
found, or -FDT_ERR_BADLAYOUT if not enough data
- * @return pointer to cell, which is only valid if err == 0
+ * Return: pointer to cell, which is only valid if err == 0
*/
static const void *get_prop_check_min_len(const void *blob, int node,
const char *prop_name, int min_len,
return 0;
}
-#if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
-# if CONFIG_IS_ENABLED(MULTI_DTB_FIT_GZIP) ||\
- CONFIG_IS_ENABLED(MULTI_DTB_FIT_LZO)
static int uncompress_blob(const void *src, ulong sz_src, void **dstp)
{
+#if CONFIG_IS_ENABLED(MULTI_DTB_FIT_GZIP) ||\
+ CONFIG_IS_ENABLED(MULTI_DTB_FIT_LZO)
size_t sz_out = CONFIG_VAL(MULTI_DTB_FIT_UNCOMPRESS_SZ);
bool gzip = 0, lzo = 0;
ulong sz_in = sz_src;
return -ENOMEM;
}
} else {
-# if CONFIG_IS_ENABLED(MULTI_DTB_FIT_USER_DEFINED_AREA)
+# if CONFIG_IS_ENABLED(MULTI_DTB_FIT_USER_DEFINED_AREA)
dst = (void *)CONFIG_VAL(MULTI_DTB_FIT_USER_DEF_ADDR);
-# else
+# else
return -ENOTSUPP;
-# endif
+# endif
}
if (CONFIG_IS_ENABLED(GZIP) && gzip)
return -EBADMSG;
}
*dstp = dst;
- return 0;
-}
-# else
-static int uncompress_blob(const void *src, ulong sz_src, void **dstp)
-{
+#else
+ *dstp = (void *)src;
*dstp = (void *)src;
+#endif
return 0;
}
-# endif
-#endif
-#if defined(CONFIG_OF_BOARD) || defined(CONFIG_OF_SEPARATE)
-/*
- * For CONFIG_OF_SEPARATE, the board may optionally implement this to
- * provide and/or fixup the fdt.
+/**
+ * fdt_find_separate() - Find a devicetree at the end of the image
+ *
+ * Return: pointer to FDT blob
*/
-__weak void *board_fdt_blob_setup(void)
+static void *fdt_find_separate(void)
{
void *fdt_blob = NULL;
+
+ if (IS_ENABLED(CONFIG_SANDBOX))
+ return NULL;
+
#ifdef CONFIG_SPL_BUILD
/* FDT is at end of BSS unless it is in a different memory region */
if (IS_ENABLED(CONFIG_SPL_SEPARATE_BSS))
/* FDT is at end of image */
fdt_blob = (ulong *)&_end;
#endif
+
return fdt_blob;
}
-#endif
int fdtdec_set_ethernet_mac_address(void *fdt, const u8 *mac, size_t size)
{
return 0;
}
+/* TODO(sjg@chromium.org): This function should not be weak */
__weak int fdtdec_board_setup(const void *fdt_blob)
{
return 0;
}
-int fdtdec_setup(void)
+/**
+ * setup_multi_dtb_fit() - locate the correct dtb from a FIT
+ *
+ * This supports the CONFIG_MULTI_DTB_FIT feature, looking for the dtb in a
+ * supplied FIT
+ *
+ * It accepts the current value of gd->fdt_blob, which points to the FIT, then
+ * updates that gd->fdt_blob, to point to the chosen dtb so that U-Boot uses the
+ * correct one
+ */
+static void setup_multi_dtb_fit(void)
{
- int ret;
-#if CONFIG_IS_ENABLED(OF_CONTROL)
-# if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
- void *fdt_blob;
-# endif
-# ifdef CONFIG_OF_EMBED
- /* Get a pointer to the FDT */
-# ifdef CONFIG_SPL_BUILD
- gd->fdt_blob = __dtb_dt_spl_begin;
-# else
- gd->fdt_blob = __dtb_dt_begin;
-# endif
-# elif defined(CONFIG_OF_BOARD) || defined(CONFIG_OF_SEPARATE)
- /* Allow the board to override the fdt address. */
- gd->fdt_blob = board_fdt_blob_setup();
-# elif defined(CONFIG_OF_HOSTFILE)
- if (sandbox_read_fdt_from_file()) {
- puts("Failed to read control FDT\n");
- return -1;
- }
-# endif
-# ifndef CONFIG_SPL_BUILD
- /* Allow the early environment to override the fdt address */
- gd->fdt_blob = map_sysmem
- (env_get_ulong("fdtcontroladdr", 16,
- (unsigned long)map_to_sysmem(gd->fdt_blob)), 0);
-# endif
+ void *blob;
-# if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
/*
* Try and uncompress the blob.
* Unfortunately there is no way to know how big the input blob really
* is. So let us set the maximum input size arbitrarily high. 16MB
* ought to be more than enough for packed DTBs.
*/
- if (uncompress_blob(gd->fdt_blob, 0x1000000, &fdt_blob) == 0)
- gd->fdt_blob = fdt_blob;
+ if (uncompress_blob(gd->fdt_blob, 0x1000000, &blob) == 0)
+ gd->fdt_blob = blob;
/*
* Check if blob is a FIT images containings DTBs.
* If so, pick the most relevant
*/
- fdt_blob = locate_dtb_in_fit(gd->fdt_blob);
- if (fdt_blob) {
- gd->multi_dtb_fit = gd->fdt_blob;
- gd->fdt_blob = fdt_blob;
+ blob = locate_dtb_in_fit(gd->fdt_blob);
+ if (blob) {
+ gd_set_multi_dtb_fit(gd->fdt_blob);
+ gd->fdt_blob = blob;
+ gd->fdt_src = FDTSRC_FIT;
}
+}
-# endif
-#endif
+int fdtdec_setup(void)
+{
+ int ret;
+
+ /* The devicetree is typically appended to U-Boot */
+ if (IS_ENABLED(CONFIG_OF_SEPARATE)) {
+ gd->fdt_blob = fdt_find_separate();
+ gd->fdt_src = FDTSRC_SEPARATE;
+ } else { /* embed dtb in ELF file for testing / development */
+ gd->fdt_blob = dtb_dt_embedded();
+ gd->fdt_src = FDTSRC_EMBED;
+ }
+
+ /* Allow the board to override the fdt address. */
+ if (IS_ENABLED(CONFIG_OF_BOARD)) {
+ gd->fdt_blob = board_fdt_blob_setup(&ret);
+ if (ret)
+ return ret;
+ gd->fdt_src = FDTSRC_BOARD;
+ }
+
+ /* Allow the early environment to override the fdt address */
+ if (!IS_ENABLED(CONFIG_SPL_BUILD)) {
+ ulong addr;
+
+ addr = env_get_hex("fdtcontroladdr", 0);
+ if (addr) {
+ gd->fdt_blob = map_sysmem(addr, 0);
+ gd->fdt_src = FDTSRC_ENV;
+ }
+ }
+
+ if (CONFIG_IS_ENABLED(MULTI_DTB_FIT))
+ setup_multi_dtb_fit();
ret = fdtdec_prepare_fdt();
if (!ret)
return ret;
}
-#if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
int fdtdec_resetup(int *rescan)
{
void *fdt_blob;
* FIT image stillpresent there. Save the time and space
* required to uncompress it again.
*/
- if (gd->multi_dtb_fit) {
- fdt_blob = locate_dtb_in_fit(gd->multi_dtb_fit);
+ if (gd_multi_dtb_fit()) {
+ fdt_blob = locate_dtb_in_fit(gd_multi_dtb_fit());
if (fdt_blob == gd->fdt_blob) {
/*
*rescan = 0;
return 0;
}
-#endif
int fdtdec_decode_ram_size(const void *blob, const char *area, int board_id,
phys_addr_t *basep, phys_size_t *sizep,
projects / platform / kernel / u-boot.git / blobdiff