## automake - create Makefile.in from Makefile.am
-## Copyright (C) 2001, 2003, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-## Free Software Foundation, Inc.
+## Copyright (C) 2001-2012 Free Software Foundation, Inc.
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## You should have received a copy of the GNU General Public License
## along with this program. If not, see <http://www.gnu.org/licenses/>.
+am__tty_colors_dummy = \
+ mgn= red= grn= lgn= blu= brg= std=; \
+ am__color_tests=no
if %?COLOR%
-# If stdout is a non-dumb tty, use colors. If test -t is not supported,
-# then this fails; a conservative approach. Of course do not redirect
-# stdout here, just stderr.
-am__tty_colors = \
-red=; grn=; lgn=; blu=; std=; \
-test "X$(AM_COLOR_TESTS)" != Xno \
-&& test "X$$TERM" != Xdumb \
-&& { test "X$(AM_COLOR_TESTS)" = Xalways || test -t 1 2>/dev/null; } \
-&& { \
- red='\e[0;31m'; \
- grn='\e[0;32m'; \
- lgn='\e[1;32m'; \
- blu='\e[1;34m'; \
- std='\e[m'; \
+am__tty_colors = { \
+ $(am__tty_colors_dummy); \
+ if test "X$(AM_COLOR_TESTS)" = Xno; then \
+ am__color_tests=no; \
+ elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+ am__color_tests=yes; \
+## If stdout is a non-dumb tty, use colors. If test -t is not supported,
+## then this check fails; a conservative approach. Of course do not
+## redirect stdout here, just stderr.
+ elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+ am__color_tests=yes; \
+ fi; \
+ if test $$am__color_tests = yes; then \
+ red='\e[0;31m'; \
+ grn='\e[0;32m'; \
+ lgn='\e[1;32m'; \
+ blu='\e[1;34m'; \
+ mgn='\e[0;35m'; \
+ brg='\e[1m'; \
+ std='\e[m'; \
+ fi; \
}
else !%?COLOR%
-am__tty_colors = \
-red=; grn=; lgn=; blu=; std=
+am__tty_colors = $(am__tty_colors_dummy)
endif !%?COLOR%
.PHONY: check-TESTS
## New parallel test driver.
##
-## This code is adapted from check.mk which was originally
-## written at EPITA/LRDE, further developed at Gostai, then made
-## its way from GNU coreutils to end up, largely rewritten, in
-## Automake.
+## The first version of the code here was adapted from check.mk, which was
+## originally written at EPITA/LRDE, further developed at Gostai, then made
+## its way from GNU coreutils to end up, largely rewritten, in Automake.
+## The current version is an heavy rewrite of that, to allow for support
+## of more test metadata, and the use of custom test derivers and protocols
+## (among them, TAP).
+
+am__recheck_rx = ^[ ]*:recheck:[ ]*
+am__global_test_result_rx = ^[ ]*:global-test-result:[ ]*
+am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]*
+
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+## By default, we assume the test is to be re-run.
+ recheck = 1; \
+ while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+ { \
+ if (rc < 0) \
+ { \
+## If we've encountered an I/O error here, there are three possibilities:
##
-## It provides special support for "unit tests", that is to say,
-## tests that (once run) no longer need to be re-compiled and
-## re-run at each "make check", unless their sources changed. To
-## enable unit-test supports, set RECHECK_LOGS to empty. In such a
-## setting, that heavily relies on correct dependencies, its users may
-## prefer to define EXTRA_PROGRAMS instead of check_PROGRAMS, because
-## it allows intertwined compilation and execution of the tests.
-## Sometimes this helps catching errors earlier (you don't have to
-## wait for all the tests to be compiled).
+## [1] The '.log' file exists, but the '.trs' does not; in this case,
+## we "gracefully" recover by assuming the corresponding test is
+## to be re-run (which will re-create the missing '.trs' file).
##
-## Define TEST_SUITE_LOG to be the name of the global log to create.
-## Define TEST_LOGS to the set of logs to include in it. It defaults
-## to $(TESTS), with `.test' and `@EXEEXT@' removed, and `'.log'
-## appended.
+## [2] Both the '.log' and '.trs' files are missing; this means that
+## the corresponding test has not been run, and is thus *not* to
+## be re-run.
##
-## In addition to the magic "exit 77 means SKIP" feature (which was
-## imported from automake), there is a magic "exit 99 means FAIL" feature
-## which is useful if you need to issue a hard error no matter whether the
-## test is XFAIL or not. You can disable this feature by setting the
-## variable DISABLE_HARD_ERRORS to a nonempty value.
-
-# Restructured Text title and section.
-am__rst_title = sed 's/.*/ & /;h;s/./=/g;p;x;p;g;p;s/.*//'
-am__rst_section = sed 'p;s/./=/g;p;g'
+## [3] We have encountered some corner-case problem (e.g., a '.log' or
+## '.trs' files somehow made unreadable, or issues with a bad NFS
+## connection, or whatever); we don't handle such corner cases.
+##
+ if ((getline line2 < ($$0 ".log")) < 0) \
+ recheck = 0; \
+ break; \
+ } \
+ else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+## A directive explicitly specifying the test is *not* to be re-run.
+ { \
+ recheck = 0; \
+ break; \
+ } \
+ else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+ { \
+## A directive explicitly specifying the test *is* to be re-run.
+ break; \
+ } \
+## else continue with the next iteration.
+ }; \
+ if (recheck) \
+ print $$0; \
+## Don't leak open file descriptors, as this could cause serious
+## problems when there are many tests (yes, even on Linux).
+ close ($$0 ".trs"); \
+ close ($$0 ".log"); \
+}'
-# Put stdin (possibly several lines separated by ". ") in a box.
-# Prefix each line by 'col' and terminate each with 'std', for coloring.
-# Multi line coloring is problematic with "less -R", so we really need
-# to color each line individually.
-am__text_box = $(AWK) '{ \
- n = split($$0, lines, "\\. "); max = 0; \
- for (i = 1; i <= n; ++i) \
- if (max < length(lines[i])) \
- max = length(lines[i]); \
- for (i = 0; i < max; ++i) \
- line = line "="; \
- print col line std; \
- for (i = 1; i <= n; ++i) \
- if (lines[i]) \
- print col lines[i] std; \
- print col line std; \
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+ print "fatal: making $@: " msg | "cat >&2"; \
+ exit 1; \
+} \
+function rst_section(header) \
+{ \
+ print header; \
+ len = length(header); \
+ for (i = 1; i <= len; i = i + 1) \
+ printf "="; \
+ printf "\n\n"; \
+} \
+{ \
+## By default, we assume the test log is to be copied in the global log,
+## and that its result is simply "RUN" (i.e., we still don't know what
+## it outcome was, but we know that at least it has run).
+ copy_in_global_log = 1; \
+ global_test_result = "RUN"; \
+ while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+ { \
+ if (rc < 0) \
+ fatal("failed to read from " $$0 ".trs"); \
+ if (line ~ /$(am__global_test_result_rx)/) \
+ { \
+ sub("$(am__global_test_result_rx)", "", line); \
+ sub("[ ]*$$", "", line); \
+ global_test_result = line; \
+ } \
+ else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+ copy_in_global_log = 0; \
+ }; \
+ if (copy_in_global_log) \
+ { \
+ rst_section(global_test_result ": " $$0); \
+ while ((rc = (getline line < ($$0 ".log"))) != 0) \
+ { \
+ if (rc < 0) \
+ fatal("failed to read from " $$0 ".log"); \
+ print line; \
+ }; \
+ printf "\n"; \
+ }; \
+## Don't leak open file descriptors, as this could cause serious
+## problems when there are many tests (yes, even on Linux).
+ close ($$0 ".trs"); \
+ close ($$0 ".log"); \
}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+ --color-tests "$$am__color_tests" \
+ --enable-hard-errors "$$am__enable_hard_errors" \
+ --expect-failure "$$am__expect_failure"
+
# To be inserted before the command running the test. Creates the
# directory for the log if needed. Stores in $dir the directory
-# containing $f, in $tst the test, in $log the log, and passes
-# TESTS_ENVIRONMENT. Save and restore TERM around use of
-# TESTS_ENVIRONMENT, in case that unsets it.
+# containing $f, in $tst the test, in $log the log. Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT. Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
am__check_pre = \
$(am__sh_e_setup); \
$(am__vpath_adj_setup) $(am__vpath_adj) \
+$(am__tty_colors); \
srcdir=$(srcdir); export srcdir; \
-rm -f $@-t; \
-am__trap='rm -f '\''$(abs_builddir)/$@-t'\''; (exit $$st); exit $$st'; \
-trap "st=129; $$am__trap" 1; trap "st=130; $$am__trap" 2; \
-trap "st=141; $$am__trap" 13; trap "st=143; $$am__trap" 15; \
-am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`; \
-test "x$$am__odir" = x. || $(MKDIR_P) "$$am__odir" || exit $$?; \
+case "$@" in \
+ */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \
+ *) am__odir=.;; \
+esac; \
+test "x$$am__odir" = x"." || test -d "$$am__odir" \
+ || $(MKDIR_P) "$$am__odir" || exit $$?; \
if test -f "./$$f"; then dir=./; \
elif test -f "$$f"; then dir=; \
else dir="$(srcdir)/"; fi; \
-tst=$$dir$$f; log='$@'; __SAVED_TERM=$$TERM; \
-$(TESTS_ENVIRONMENT)
-
-# To be appended to the command running the test. Handle the stdout
-# and stderr redirection, and catch the exit status.
-am__check_post = \
->$@-t 2>&1; \
-estatus=$$?; \
-if test -n '$(DISABLE_HARD_ERRORS)' \
- && test $$estatus -eq 99; then \
- estatus=1; \
-fi; \
-TERM=$$__SAVED_TERM; export TERM; \
-$(am__tty_colors); \
-xfailed=PASS; \
+tst=$$dir$$f; log='$@'; \
+if test -n '$(DISABLE_HARD_ERRORS)'; then \
+ am__enable_hard_errors=no; \
+else \
+ am__enable_hard_errors=yes; \
+fi; \
+## The use of $dir below is required to account for VPATH
+## rewriting done by Sun make.
case " $(XFAIL_TESTS) " in \
*[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
- xfailed=XFAIL;; \
-esac; \
-case $$estatus.$$xfailed in \
- 0.XFAIL) col=$$red; res=XPASS;; \
- 0.*) col=$$grn; res=PASS ;; \
- 77.*) col=$$blu; res=SKIP ;; \
- 99.*) col=$$red; res=FAIL ;; \
- *.XFAIL) col=$$lgn; res=XFAIL;; \
- *.*) col=$$red; res=FAIL ;; \
-esac; \
-echo "$${col}$$res$${std}: $$f"; \
-echo "$$res: $$f (exit: $$estatus)" | \
- $(am__rst_section) >$@; \
-cat $@-t >>$@; \
-rm -f $@-t
+ am__expect_failure=yes;; \
+ *) \
+ am__expect_failure=no;; \
+esac; \
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed). The result is saved in the shell variable
+# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.test' and 'test-trs-basic.test'.
+am__set_TESTS_bases = \
+ bases='$(TEST_LOGS)'; \
+ bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+## Trim away any extra whitespace. This has already proved useful
+## in avoiding weird bug on lesser make implementations. It also
+## works around the GNU make 3.80 bug where trailing whitespace in
+## "TESTS = foo.test $(empty)" causes $(TESTS_LOGS) to erroneously
+## expand to "foo.log .log".
+ bases=`echo $$bases`
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+ rm -f $< $@
+ $(MAKE) $(AM_MAKEFLAGS) $<
$(TEST_SUITE_LOG): $(TEST_LOGS)
- @$(am__sh_e_setup); \
- list='$(TEST_LOGS)'; \
- results=`for f in $$list; do \
- test -r $$f && read line < $$f && echo "$$line" \
- || echo FAIL; \
- done`; \
- all=`echo "$$results" | sed '/^$$/d' | wc -l | sed -e 's/^[ ]*//'`; \
- fail=`echo "$$results" | grep -c '^FAIL'`; \
- pass=`echo "$$results" | grep -c '^PASS'`; \
- skip=`echo "$$results" | grep -c '^SKIP'`; \
- xfail=`echo "$$results" | grep -c '^XFAIL'`; \
- xpass=`echo "$$results" | grep -c '^XPASS'`; \
- failures=`expr $$fail + $$xpass`; \
- all=`expr $$all - $$skip`; \
- if test "$$all" -eq 1; then tests=test; All=; \
- else tests=tests; All="All "; fi; \
- case fail=$$fail:xpass=$$xpass:xfail=$$xfail in \
- fail=0:xpass=0:xfail=0) \
- msg="$$All$$all $$tests passed. "; \
- exit=true;; \
- fail=0:xpass=0:xfail=*) \
- msg="$$All$$all $$tests behaved as expected"; \
- if test "$$xfail" -eq 1; then xfailures=failure; \
- else xfailures=failures; fi; \
- msg="$$msg ($$xfail expected $$xfailures). "; \
- exit=true;; \
- fail=*:xpass=0:xfail=*) \
- msg="$$fail of $$all $$tests failed. "; \
- exit=false;; \
- fail=*:xpass=*:xfail=*) \
- msg="$$failures of $$all $$tests did not behave as expected"; \
- if test "$$xpass" -eq 1; then xpasses=pass; \
- else xpasses=passes; fi; \
- msg="$$msg ($$xpass unexpected $$xpasses). "; \
- exit=false;; \
- *) \
- echo >&2 "incorrect case"; exit 4;; \
- esac; \
- if test "$$skip" -ne 0; then \
- if test "$$skip" -eq 1; then \
- msg="$$msg($$skip test was not run). "; \
- else \
- msg="$$msg($$skip tests were not run). "; \
- fi; \
- fi; \
+ @$(am__set_TESTS_bases); \
+## Helper shell function, tells whether a path refers to an existing,
+## regular, readable file.
+ am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+## We need to ensures that all the required '.trs' and '.log' files will
+## be present and readable. The direct dependencies of $(TEST_SUITE_LOG)
+## only ensure that all the '.log' files exists; they don't ensure that
+## the '.log' files are readable, and worse, they don't ensure that the
+## '.trs' files even exist.
+ redo_bases=`for i in $$bases; do \
+ am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+ done`; \
+ if test -n "$$redo_bases"; then \
+## Uh-oh, either some '.log' files were unreadable, or some '.trs' files
+## were missing (or unreadable). We need to re-run the corresponding
+## tests in order to re-create them.
+ redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+ redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+ if $(am__make_dryrun); then :; else \
+## Break "rm -f" into two calls to minimize the possibility of exceeding
+## command line length limits.
+ rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+ fi; \
+ fi; \
+## Use a trick to to ensure that we don't go into an infinite recursion
+## in case a test log in $(TEST_LOGS) is the same as $(TEST_SUITE_LOG).
+## Yes, this has already happened in practice. Sigh!
+ if test -n "$$am__remaking_logs"; then \
+ echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+ "recursion detected" >&2; \
+ else \
+ am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+ fi; \
+ if $(am__make_dryrun); then :; else \
+## Sanity check: each unreadable or non-existent test result file should
+## has been properly remade at this point, as should the corresponding log
+## file.
+ st=0; \
+ errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+ for i in $$redo_bases; do \
+ test -f $$i.trs && test -r $$i.trs \
+ || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+ test -f $$i.log && test -r $$i.log \
+ || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+ done; \
+ test $$st -eq 0 || exit 1; \
+ fi
+## We need a new subshell to work portably with "make -n", since the
+## previous part of the recipe contained a $(MAKE) invocation.
+ @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+ ws='[ ]'; \
+## List of test result files.
+ results=`for b in $$bases; do echo $$b.trs; done`; \
+ test -n "$$results" || results=/dev/null; \
+## Prepare data for the test suite summary. These do not take into account
+## unreadable test results, but they'll be appropriately updated later if
+## needed.
+ all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
+ pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
+ fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
+ skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
+ xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+ xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+ error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+## Whether the testsuite was successful or not.
+ if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+ success=true; \
+ else \
+ success=false; \
+ fi; \
+## Make $br a line of exactly 76 '=' characters, that will be used to
+## enclose the testsuite summary report when displayed on the console.
+ br='==================='; br=$$br$$br$$br$$br; \
+## When writing the test summary to the console, we want to color a line
+## reporting the count of some result *only* if at least one test
+## experienced such a result. This function is handy in this regard.
+ result_count () \
+ { \
+ if test x"$$1" = x"--maybe-color"; then \
+ maybe_colorize=yes; \
+ elif test x"$$1" = x"--no-color"; then \
+ maybe_colorize=no; \
+ else \
+ echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+ fi; \
+ shift; \
+ desc=$$1 count=$$2; \
+ if test $$maybe_colorize = yes && test $$count -gt 0; then \
+ color_start=$$3 color_end=$$std; \
+ else \
+ color_start= color_end=; \
+ fi; \
+ echo "$${color_start}# $$desc $$count$${color_end}"; \
+ }; \
+## A shell function that creates the testsuite summary. We need it
+## because we have to create *two* summaries, one for test-suite.log,
+## and a possibly-colorized one for console output.
+ create_testsuite_report () \
+ { \
+ result_count $$1 "TOTAL:" $$all "$$brg"; \
+ result_count $$1 "PASS: " $$pass "$$grn"; \
+ result_count $$1 "SKIP: " $$skip "$$blu"; \
+ result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+ result_count $$1 "FAIL: " $$fail "$$red"; \
+ result_count $$1 "XPASS:" $$xpass "$$red"; \
+ result_count $$1 "ERROR:" $$error "$$mgn"; \
+ }; \
+## Write "global" testsuite log.
{ \
echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
$(am__rst_title); \
- echo "$$msg"; \
+ create_testsuite_report --no-color; \
echo; \
echo ".. contents:: :depth: 2"; \
echo; \
- for f in $$list; do \
- test -r $$f && read line < $$f || line=; \
- case $$line in \
- PASS:*|XFAIL:*);; \
- *) echo; cat $$f;; \
- esac; \
- done; \
- } >$(TEST_SUITE_LOG).tmp; \
+ for b in $$bases; do echo $$b; done \
+ | $(am__create_global_log); \
+ } >$(TEST_SUITE_LOG).tmp || exit 1; \
mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
- if test "$$failures" -ne 0; then \
- msg="$${msg}See $(subdir)/$(TEST_SUITE_LOG). "; \
- if test -n "$(PACKAGE_BUGREPORT)"; then \
- msg="$${msg}Please report to $(PACKAGE_BUGREPORT). "; \
- fi; \
- fi; \
- test x"$$VERBOSE" = x || $$exit || cat $(TEST_SUITE_LOG); \
- $(am__tty_colors); \
- if $$exit; then \
+## Emit the test summary on the console.
+ if $$success; then \
col="$$grn"; \
else \
col="$$red"; \
+ test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \
fi; \
- echo "$$msg" | $(am__text_box) "col=$$col" "std=$$std"; \
-## The use of "exit 1" below is required to work around a FreeBSD make bug
-## (present only when running in concurrent mode). See automake bug#9245:
+## Multi line coloring is problematic with "less -R", so we really need
+## to color each line individually.
+ echo "$${col}$$br$${std}"; \
+ echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \
+ echo "$${col}$$br$${std}"; \
+## This is expected to go to the console, so it might have to be colorized.
+ create_testsuite_report --maybe-color; \
+ echo "$$col$$br$$std"; \
+ if $$success; then :; else \
+ echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \
+ if test -n "$(PACKAGE_BUGREPORT)"; then \
+ echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \
+ fi; \
+ echo "$$col$$br$$std"; \
+ fi; \
+## Be sure to exit with the proper exit status. The use of "exit 1" below
+## is required to work around a FreeBSD make bug (present only when running
+## in concurrent mode). See automake bug#9245:
## <http://debbugs.gnu.org/cgi/bugreport.cgi?bug=9245>
## and FreeBSD PR bin/159730:
## <http://www.freebsd.org/cgi/query-pr.cgi?pr=159730>.
- $$exit || exit 1
+ $$success || exit 1
RECHECK_LOGS = $(TEST_LOGS)
+## ------------------------------------------ ##
+## Running all tests, or rechecking failures. ##
+## ------------------------------------------ ##
+
check-TESTS recheck:
## If we are running "make recheck", it's not the user which can decide
## which tests to consider for re-execution, so we must ignore the value
## of $(RECHECK_LOGS).
+## Here and below, we expand $(RECHECK_LOGS) only once, to avoid exceeding
+## line length limits.
+ @if test $@ != recheck; then \
+ list='$(RECHECK_LOGS)'; \
+ test -z "$$list" || rm -f $$list; \
+ fi
@if test $@ != recheck; then \
-## Expand $(RECHECK_LOGS) only once, to avoid exceeding line length limits.
- list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list; \
+ list='$(RECHECK_LOGS:.log=.trs)'; \
+ test -z "$$list" || rm -f $$list; \
fi
## We always have to remove TEST_SUITE_LOG, to ensure its rule is run
## in any case even in lazy mode: otherwise, if no test needs rerunning,
## or a prior run plus reruns all happen within the same timestamp (can
-## happen with a prior `make TESTS=<subset>'), then we get no log output.
-## OTOH, this means that, in the rule for `$(TEST_SUITE_LOG)', we
-## cannot use `$?' to compute the set of lazily rerun tests, lest
+## happen with a prior "make TESTS=<subset>"), then we get no log output.
+## OTOH, this means that, in the rule for '$(TEST_SUITE_LOG)', we
+## cannot use '$?' to compute the set of lazily rerun tests, lest
## we rely on .PHONY to work portably.
@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
- @list='' list2='$(TEST_LOGS)'; for f in $$list2; do \
-## Trailing whitespace in `TESTS = foo.test $(empty)' causes GNU make
-## 3.80 to erroneously expand $(TESTS_LOGS) to `foo.log .log'.
-## Work around this bug.
- test .log = $$f && continue; \
-## If running a "make recheck", we must only consider tests that had
-## an unexpected outcome (FAIL or XPASS) in the earlier run.
- if test $@ = recheck; then \
- test -f $$f || continue; \
- if test -r $$f && read line < $$f; then \
- case $$line in FAIL*|XPASS*) : ;; *) continue;; esac; \
- fi; \
- fi; \
-## Be careful to avoid extra whitespace in the definition of $list, since
-## its value will be passed to the recursive make invocation below through
-## the TEST_LOGS macro, and leading/trailing white space in a make macro
-## definition can be problematic. In this particular case, trailing white
-## space was known to cause a segmentation fault on Solaris 10 XPG4 make:
-## <http://lists.gnu.org/archive/html/bug-automake/2010-08/msg00004.html>
- if test -z "$$list"; then list=$$f; else list="$$list $$f"; fi; \
- done; \
-## Under "make recheck", remove the logs of the files to recheck, so that
-## those will be rerun by the "make test-suite.log" recursive invocation
-## below. But avoid extra files removal when running under "make -n".
- if test $@ = recheck && test -n "$$list"; then \
- $(am__make_dryrun) || rm -f $$list || exit 1; \
+ @$(am__set_TESTS_bases); \
+ if test $@ = recheck; then \
+## If running a "make recheck", we must only consider tests that had an
+## unexpected outcome (FAIL or XPASS) in the earlier run.
+ bases=`for i in $$bases; do echo $$i; done \
+ | $(am__list_recheck_tests)` || exit 1; \
+ fi; \
+ log_list=`for i in $$bases; do echo $$i.log; done`; \
+ trs_list=`for i in $$bases; do echo $$i.trs; done`; \
+## Remove newlines and normalize whitespace, being careful to avoid extra
+## whitespace in the definition of $log_list, since its value will be
+## passed to the recursive make invocation below through the TEST_LOGS
+## macro, and leading/trailing white space in a make macro definition can
+## be problematic. In this particular case, trailing white space is known
+## to have caused segmentation faults on Solaris 10 XPG4 make:
+ log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
+## Under "make recheck", remove the .log and .trs files associated
+## with the files to recheck, so that those will be rerun by the
+## "make test-suite.log" recursive invocation below. But use a proper
+## hack to avoid extra files removal when running under "make -n".
+ if test $@ != recheck || $(am__make_dryrun); then :; else \
+ test -z "$$log_list" || rm -f $$log_list; \
+ test -z "$$trs_list" || rm -f $$trs_list; \
fi; \
- $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$list"
+ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"
## Recheck must depend on $(check_SCRIPTS), $(check_PROGRAMS), etc.
-recheck: %CHECK_DEPS%
+## It must also depend on the 'all' target. See automake bug#11252.
+recheck: all %CHECK_DEPS%
AM_RECURSIVE_TARGETS += check recheck
.PHONY: recheck
-## ----------------------------------------------- ##
-## Produce HTML. To be removed in automake 1.12. ##
-## ----------------------------------------------- ##
-
-include check-html.am
-
else !%?PARALLEL_TESTS%
check-TESTS: $(TESTS)
for tst in $$list; do \
if test -f ./$$tst; then dir=./; \
## Note: Solaris 2.7 seems to expand TESTS using VPATH. That's
-## why we also try `dir='
+## why we also try 'dir='.
elif test -f $$tst; then dir=; \
else dir="$(srcdir)/"; fi; \
- if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst $(AM_TESTS_FD_REDIRECT); then \
## Success
all=`expr $$all + 1`; \
case " $(XFAIL_TESTS) " in \
projects / platform / upstream / automake.git / blobdiff