This is used by SoC platforms which do not have built-in ELM
hardware engine required for BCH ECC correction.
+config BINMAN_FDT
+ bool "Allow access to binman information in the device tree"
+ depends on BINMAN && OF_CONTROL
+ default y
+ help
+ This enables U-Boot to access information about binman entries,
+ stored in the device tree in a binman node. Typical uses are to
+ locate entries in the firmware image. See binman.h for the available
+ functionality.
+
config CC_OPTIMIZE_LIBS_FOR_SPEED
bool "Optimize libraries for speed"
help
config SPL_PRINTF
bool
select SPL_SPRINTF
- select SPL_STRTO if !USE_TINY_PRINTF
+ select SPL_STRTO if !SPL_USE_TINY_PRINTF
config TPL_PRINTF
bool
select TPL_SPRINTF
- select TPL_STRTO if !USE_TINY_PRINTF
+ select TPL_STRTO if !TPL_USE_TINY_PRINTF
config SPRINTF
bool
get_timer() must operate in milliseconds and this option must be
set to 1000.
-config USE_TINY_PRINTF
- bool "Enable tiny printf() version"
+config SPL_USE_TINY_PRINTF
+ bool "Enable tiny printf() version in SPL"
+ depends on SPL
+ default y
+ help
+ This option enables a tiny, stripped down printf version.
+ This should only be used in space limited environments,
+ like SPL versions with hard memory limits. This version
+ reduces the code size by about 2.5KiB on armv7.
+
+ The supported format specifiers are %c, %s, %u/%d and %x.
+
+config TPL_USE_TINY_PRINTF
+ bool "Enable tiny printf() version in TPL"
+ depends on TPL
+ default y if SPL_USE_TINY_PRINTF
help
This option enables a tiny, stripped down printf version.
This should only be used in space limited environments,
choice
prompt "Pseudo-random library support type"
- depends on NET_RANDOM_ETHADDR || RANDOM_UUID || CMD_UUID
+ depends on NET_RANDOM_ETHADDR || RANDOM_UUID || CMD_UUID || \
+ RNG_SANDBOX || UT_LIB && AES
default LIB_RAND
help
Select the library to provide pseudo-random number generator
bool "Pseudo-random library support"
config LIB_HW_RAND
- bool "HW Engine for random libray support"
+ bool "HW Engine for random library support"
endchoice
present.
source lib/rsa/Kconfig
+source lib/crypto/Kconfig
config TPM
bool "Trusted Platform Module (TPM) Support"
The SHA256 algorithm produces a 256-bit (32-byte) hash value
(digest).
+config SHA512_ALGO
+ bool "Enable SHA512 algorithm"
+ help
+ This option enables support of internal SHA512 algorithm.
+
+config SHA512
+ bool "Enable SHA512 support"
+ depends on SHA512_ALGO
+ help
+ This option enables support of hashing using SHA512 algorithm.
+ The hash is calculated in software.
+ The SHA512 algorithm produces a 512-bit (64-byte) hash value
+ (digest).
+
+config SHA384
+ bool "Enable SHA384 support"
+ depends on SHA512_ALGO
+ help
+ This option enables support of hashing using SHA384 algorithm.
+ The hash is calculated in software.
+ The SHA384 algorithm produces a 384-bit (48-byte) hash value
+ (digest).
+
config SHA_HW_ACCEL
bool "Enable hashing using hardware"
help
is performed in hardware.
config MD5
- bool
+ bool "Support MD5 algorithm"
+ help
+ This option enables MD5 support. MD5 is an algorithm designed
+ in 1991 that produces a 16-byte digest (or checksum) from its input
+ data. It has a number of vulnerabilities which preclude its use in
+ security applications, but it can be useful for providing a quick
+ checksum of a block of data.
+
+config SPL_MD5
+ bool "Support MD5 algorithm in SPL"
+ help
+ This option enables MD5 support in SPL. MD5 is an algorithm designed
+ in 1991 that produces a 16-byte digest (or checksum) from its input
+ data. It has a number of vulnerabilities which preclude its use in
+ security applications, but it can be useful for providing a quick
+ checksum of a block of data.
config CRC32C
bool
help
This enables support for GZIP compression algorithm.
+config GZIP_COMPRESSED
+ bool
+ select ZLIB
+
+config BZIP2
+ bool "Enable bzip2 decompression support"
+ help
+ This enables support for BZIP2 compression algorithm.
+
config ZLIB
bool
default y
config SPL_LZ4
bool "Enable LZ4 decompression support in SPL"
help
- This enables support for tge LZ4 decompression algorithm in SPL. LZ4
+ This enables support for the LZ4 decompression algorithm in SPL. LZ4
is a lossless data compression algorithm that is focused on
fast compression and decompression speed. It belongs to the LZ77
family of byte-oriented compression schemes.
+config SPL_LZMA
+ bool "Enable LZMA decompression support for SPL build"
+ help
+ This enables support for LZMA compression algorithm for SPL boot.
+
config SPL_LZO
bool "Enable LZO decompression support in SPL"
help
particular compatible nodes. The library operates on a flattened
version of the device tree.
+config OF_LIBFDT_ASSUME_MASK
+ hex "Mask of conditions to assume for libfdt"
+ depends on OF_LIBFDT || FIT
+ default 0
+ help
+ Use this to change the assumptions made by libfdt about the
+ device tree it is working with. A value of 0 means that no assumptions
+ are made, and libfdt is able to deal with malicious data. A value of
+ 0xff means all assumptions are made and any invalid data may cause
+ unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
+
config OF_LIBFDT_OVERLAY
bool "Enable the FDT library overlay support"
depends on OF_LIBFDT
particular compatible nodes. The library operates on a flattened
version of the device tree.
+config SPL_OF_LIBFDT_ASSUME_MASK
+ hex "Mask of conditions to assume for libfdt"
+ depends on SPL_OF_LIBFDT || FIT
+ default 0xff
+ help
+ Use this to change the assumptions made by libfdt in SPL about the
+ device tree it is working with. A value of 0 means that no assumptions
+ are made, and libfdt is able to deal with malicious data. A value of
+ 0xff means all assumptions are made and any invalid data may cause
+ unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
+
config TPL_OF_LIBFDT
bool "Enable the FDT library for TPL"
default y if TPL_OF_CONTROL
particular compatible nodes. The library operates on a flattened
version of the device tree.
+config TPL_OF_LIBFDT_ASSUME_MASK
+ hex "Mask of conditions to assume for libfdt"
+ depends on TPL_OF_LIBFDT || FIT
+ default 0xff
+ help
+ Use this to change the assumptions made by libfdt in TPL about the
+ device tree it is working with. A value of 0 means that no assumptions
+ are made, and libfdt is able to deal with malicious data. A value of
+ 0xff means all assumptions are made and any invalid data may cause
+ unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
+
config FDT_FIXUP_PARTITIONS
bool "overwrite MTD partitions in DTS through defined in 'mtdparts'"
depends on OF_LIBFDT
endmenu
+config ASN1_COMPILER
+ bool
+
+config ASN1_DECODER
+ bool
+ help
+ Enable asn1 decoder library.
+
+config OID_REGISTRY
+ bool
+ help
+ Enable fast lookup object identifier registry.
+
source lib/efi/Kconfig
source lib/efi_loader/Kconfig
source lib/optee/Kconfig
bool "enable fdtdec test"
depends on OF_LIBFDT
+config LIB_DATE
+ bool
+
+config LIB_ELF
+ bool
+ help
+ Supoort basic elf loading/validating functions.
+ This supports fir 32 bit and 64 bit versions.
+
endmenu
projects / platform / kernel / u-boot.git / blobdiff