am__v_at_0 = @
SOURCES =
DIST_SOURCES =
+am__tty_colors_dummy = \
+ mgn= red= grn= lgn= blu= brg= std=; \
+ am__color_tests=no
# If stdout is a non-dumb tty, use colors. If test -t is not supported,
# then this fails; a conservative approach. Of course do not redirect
# stdout here, just stderr.
am__tty_colors = \
-red=; grn=; lgn=; blu=; std=; \
+$(am__tty_colors_dummy); \
test "X$(AM_COLOR_TESTS)" != Xno \
&& test "X$$TERM" != Xdumb \
&& { test "X$(AM_COLOR_TESTS)" = Xalways || test -t 1 2>/dev/null; } \
&& { \
+ am__color_tests=yes; \
red='\e[0;31m'; \
grn='\e[0;32m'; \
lgn='\e[1;32m'; \
blu='\e[1;34m'; \
+ mgn='\e[0;35m'; \
+ brg='\e[1m'; \
std='\e[m'; \
}
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-# Restructured Text title and section.
+# Restructured Text title.
am__rst_title = sed 's/.*/ & /;h;s/./=/g;p;x;p;g;p;s/.*//'
-am__rst_section = sed 'p;s/./=/g;p;g'
-# Put stdin (possibly several lines separated by ". ") in a box.
-# Prefix each line by 'col' and terminate each with 'std', for coloring.
-# Multi line coloring is problematic with "less -R", so we really need
-# to color each line individually.
-am__text_box = $(AWK) '{ \
- n = split($$0, lines, "\\. "); max = 0; \
- for (i = 1; i <= n; ++i) \
- if (max < length(lines[i])) \
- max = length(lines[i]); \
- for (i = 0; i < max; ++i) \
- line = line "="; \
- print col line std; \
- for (i = 1; i <= n; ++i) \
- if (lines[i]) \
- print col lines[i] std; \
- print col line std; \
-}'
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+ --color-tests "$$am__color_tests" \
+ --enable-hard-errors "$$am__enable_hard_errors" \
+ --expect-failure "$$am__expect_failure"
# To be inserted before the command running the test. Creates the
# directory for the log if needed. Stores in $dir the directory
# containing $f, in $tst the test, in $log the log. Executes the
# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
-# passes TESTS_ENVIRONMENT. Saves and restores TERM around uses of
-# TESTS_ENVIRONMENT and AM_TESTS_ENVIRONMENT, in case any of them
-# unsets it.
+# passes TESTS_ENVIRONMENT. Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
am__check_pre = \
$(am__sh_e_setup); \
$(am__vpath_adj_setup) $(am__vpath_adj) \
+$(am__tty_colors); \
srcdir=$(srcdir); export srcdir; \
-rm -f $@-t; \
-am__trap='rm -f '\''$(abs_builddir)/$@-t'\''; (exit $$st); exit $$st'; \
-trap "st=129; $$am__trap" 1; trap "st=130; $$am__trap" 2; \
-trap "st=141; $$am__trap" 13; trap "st=143; $$am__trap" 15; \
am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`; \
test "x$$am__odir" = x. || $(MKDIR_P) "$$am__odir" || exit $$?; \
if test -f "./$$f"; then dir=./; \
elif test -f "$$f"; then dir=; \
else dir="$(srcdir)/"; fi; \
-tst=$$dir$$f; log='$@'; __SAVED_TERM=$$TERM; \
-$(AM_TESTS_ENVIRONMENT) \
-$(TESTS_ENVIRONMENT)
-# To be appended to the command running the test. Handle the stdout
-# and stderr redirection, and catch the exit status.
-am__check_post = \
->$@-t 2>&1; \
-estatus=$$?; \
-if test -n '$(DISABLE_HARD_ERRORS)' \
- && test $$estatus -eq 99; then \
- estatus=1; \
-fi; \
-TERM=$$__SAVED_TERM; export TERM; \
-$(am__tty_colors); \
-xfailed=PASS; \
+tst=$$dir$$f; log='$@'; \
+if test -n '$(DISABLE_HARD_ERRORS)'; then \
+ am__enable_hard_errors=no; \
+else \
+ am__enable_hard_errors=yes; \
+fi; \
case " $(XFAIL_TESTS) " in \
*[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
- xfailed=XFAIL;; \
-esac; \
-case $$estatus.$$xfailed in \
- 0.XFAIL) col=$$red; res=XPASS;; \
- 0.*) col=$$grn; res=PASS ;; \
- 77.*) col=$$blu; res=SKIP ;; \
- 99.*) col=$$red; res=FAIL ;; \
- *.XFAIL) col=$$lgn; res=XFAIL;; \
- *.*) col=$$red; res=FAIL ;; \
-esac; \
-echo "$${col}$$res$${std}: $$f"; \
-echo "$$res: $$f (exit: $$estatus)" | \
- $(am__rst_section) >$@; \
-cat $@-t >>$@; \
-rm -f $@-t
+ am__expect_failure=yes;; \
+ *) \
+ am__expect_failure=no;; \
+esac; \
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# The names of the tests, with any registered extension removed. Or
+# equivalently, the names of the test logs, with the `.log' extension
+# renoved. This honours runtime overriding of TESTS and TEST_LOGS.
+am__TEST_BASES = $(TEST_LOGS:.log=)
+# This can be used instead of $(MAKE) in recipes requiring a recursive call
+# to make, but which are not intended to be executed by "make -n". See the
+# GNU make manual for more details.
+am__stealth_MAKE = $(MAKE)
RECHECK_LOGS = $(TEST_LOGS)
AM_RECURSIVE_TARGETS = check check-html recheck recheck-html
TEST_SUITE_LOG = test-suite.log
TEST_SUITE_HTML = $(TEST_SUITE_LOG:.log=.html)
am__test_logs1 = $(TESTS:=.log)
TEST_LOGS = $(am__test_logs1:.pl.log=.log)
+PL_LOG_DRIVER = $(SHELL) $(top_srcdir)/lib/test-driver
PL_LOG_COMPILE = $(PL_LOG_COMPILER) $(AM_PL_LOG_FLAGS) $(PL_LOG_FLAGS)
TEST_LOGS_TMP = $(TEST_LOGS:.log=.log-t)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
all: all-am
.SUFFIXES:
-.SUFFIXES: .html .log .pl
+.SUFFIXES: .html .log .pl .trs
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/CheckListOfTests.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
cscope cscopelist:
+# Recover from deleted `.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run `foo.test', and re-create
+# both `foo.log' and `foo.trs'.
+.log.trs:
+ rm -f $< $@ && $(am__stealth_MAKE) $(AM_MAKEFLAGS) $<
+
$(TEST_SUITE_LOG): $(TEST_LOGS)
- @$(am__sh_e_setup); \
- list='$(TEST_LOGS)'; \
- results=`for f in $$list; do \
- test -r $$f && read line < $$f && echo "$$line" \
- || echo FAIL; \
- done`; \
- all=`echo "$$results" | sed '/^$$/d' | wc -l | sed -e 's/^[ ]*//'`; \
- fail=`echo "$$results" | grep -c '^FAIL'`; \
- pass=`echo "$$results" | grep -c '^PASS'`; \
- skip=`echo "$$results" | grep -c '^SKIP'`; \
- xfail=`echo "$$results" | grep -c '^XFAIL'`; \
- xpass=`echo "$$results" | grep -c '^XPASS'`; \
- failures=`expr $$fail + $$xpass`; \
- all=`expr $$all - $$skip`; \
- if test "$$all" -eq 1; then tests=test; All=; \
- else tests=tests; All="All "; fi; \
- case fail=$$fail:xpass=$$xpass:xfail=$$xfail in \
- fail=0:xpass=0:xfail=0) \
- msg="$$All$$all $$tests passed. "; \
- exit=true;; \
- fail=0:xpass=0:xfail=*) \
- msg="$$All$$all $$tests behaved as expected"; \
- if test "$$xfail" -eq 1; then xfailures=failure; \
- else xfailures=failures; fi; \
- msg="$$msg ($$xfail expected $$xfailures). "; \
- exit=true;; \
- fail=*:xpass=0:xfail=*) \
- msg="$$fail of $$all $$tests failed. "; \
- exit=false;; \
- fail=*:xpass=*:xfail=*) \
- msg="$$failures of $$all $$tests did not behave as expected"; \
- if test "$$xpass" -eq 1; then xpasses=pass; \
- else xpasses=passes; fi; \
- msg="$$msg ($$xpass unexpected $$xpasses). "; \
- exit=false;; \
- *) \
- echo >&2 "incorrect case"; exit 4;; \
- esac; \
- if test "$$skip" -ne 0; then \
- if test "$$skip" -eq 1; then \
- msg="$$msg($$skip test was not run). "; \
- else \
- msg="$$msg($$skip tests were not run). "; \
- fi; \
- fi; \
+ @$(am__sh_e_setup); $(am__tty_colors); \
+ bases='$(am__TEST_BASES)'; \
+ ws='[ ]'; \
+ redo_bases=`for b in $$bases; do \
+ test -f $$b.trs && test -r $$b.trs \
+ && test -f $$b.log && test -r $$b.log \
+ || echo $$b; \
+ done`; \
+ if test -n "$$redo_bases"; then \
+ redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+ redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+ rm -f $$redo_logs && rm -f $$redo_results \
+ && $(am__stealth_MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+ fi; \
+ st=0; \
+ for b in $$redo_bases; do \
+ for e in trs log; do \
+ if test ! -f $$b.$$e || test ! -r $$b.$$e; then \
+ echo "fatal: making $@: failed to create $$b.$$e" >&2; \
+ st=1; \
+ fi; \
+ done; \
+ done; \
+ test $$st -eq 0 || exit 1; \
+ results=`for b in $$bases; do echo $$b.trs; done`; \
+ test -n "$$results" || results=/dev/null; \
+ all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
+ pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
+ fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
+ skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
+ xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+ xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+ error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+ if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+ success=true; \
+ else \
+ success=false; \
+ fi; \
+ br='==================='; br=$$br$$br$$br$$br; \
+ result_count () \
+ { \
+ if test x"$$1" = x"--maybe-color"; then \
+ maybe_colorize=yes; \
+ elif test x"$$1" = x"--no-color"; then \
+ maybe_colorize=no; \
+ else \
+ echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+ fi; \
+ shift; \
+ desc=$$1 count=$$2; \
+ if test $$maybe_colorize = yes && test $$count -gt 0; then \
+ color_start=$$3 color_end=$$std; \
+ else \
+ color_start= color_end=; \
+ fi; \
+ echo "$${color_start}# $$desc $$count$${color_end}"; \
+ }; \
+ create_testsuite_report () \
+ { \
+ result_count $$1 "TOTAL:" $$all "$$brg"; \
+ result_count $$1 "PASS: " $$pass "$$grn"; \
+ result_count $$1 "SKIP: " $$skip "$$blu"; \
+ result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+ result_count $$1 "FAIL: " $$fail "$$red"; \
+ result_count $$1 "XPASS:" $$xpass "$$red"; \
+ result_count $$1 "ERROR:" $$error "$$mgn"; \
+ }; \
{ \
echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
$(am__rst_title); \
- echo "$$msg"; \
+ create_testsuite_report --no-color; \
echo; \
echo ".. contents:: :depth: 2"; \
echo; \
- for f in $$list; do \
- test -r $$f && read line < $$f || line=; \
- case $$line in \
- PASS:*|XFAIL:*);; \
- *) echo; cat $$f;; \
- esac; \
+ for b in $$bases; do \
+ if grep "^$$ws*:copy-in-global-log:$$ws*no$$ws*$$" $$b.trs \
+ >/dev/null; then :; \
+ elif test ! -r $$b.log; then \
+ echo "ERROR: cannot read $$b.log" >&2; \
+ echo && echo "WARNING: could not read $$b.log!"; \
+ else \
+ echo && cat $$b.log; \
+ fi; \
done; \
} >$(TEST_SUITE_LOG).tmp; \
mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
- if test "$$failures" -ne 0; then \
- msg="$${msg}See $(subdir)/$(TEST_SUITE_LOG). "; \
- if test -n "$(PACKAGE_BUGREPORT)"; then \
- msg="$${msg}Please report to $(PACKAGE_BUGREPORT). "; \
- fi; \
- fi; \
- test x"$$VERBOSE" = x || $$exit || cat $(TEST_SUITE_LOG); \
- $(am__tty_colors); \
- if $$exit; then \
+ if $$success; then \
col="$$grn"; \
else \
col="$$red"; \
+ test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \
fi; \
- echo "$$msg" | $(am__text_box) "col=$$col" "std=$$std"; \
- $$exit
+ echo "$${col}$$br$${std}"; \
+ echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \
+ echo "$${col}$$br$${std}"; \
+ create_testsuite_report --maybe-color; \
+ echo "$$col$$br$$std"; \
+ if $$success; then :; else \
+ echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \
+ if test -n "$(PACKAGE_BUGREPORT)"; then \
+ echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \
+ fi; \
+ echo "$$col$$br$$std"; \
+ fi; \
+ $$success
# Run all the tests.
check-TESTS:
@list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list
+ @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
@list='$(TEST_LOGS)'; \
list=`for f in $$list; do \
$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_HTML) || exit 4; \
exit $$rv
recheck recheck-html:
- @target=`echo $@ | sed 's,^re,,'`; \
- list='$(TEST_LOGS)'; \
- list=`for f in $$list; do \
- test -f $$f || continue; \
- if test -r $$f && read line < $$f; then \
- case $$line in FAIL*|XPASS*) echo $$f;; esac; \
- else echo $$f; fi; \
+ @ws='[ ]'; \
+ target=`echo $@ | sed 's,^re,,'`; \
+ bases='$(am__TEST_BASES)'; \
+ list=`for b in $$bases; do \
+ test ! -f $$b.trs && test ! -f $$b.log && continue; \
+ grep "^$$ws*:recheck:$$ws*no$$ws*$$" $$b.trs \
+ >/dev/null 2>&1 || echo $$b.log; \
done | tr '\012\015' ' '`; \
list=`echo "$$list" | sed 's/ *$$//'`; \
$(MAKE) $(AM_MAKEFLAGS) $$target AM_MAKEFLAGS='$(AM_MAKEFLAGS) TEST_LOGS="'"$$list"'"'
.pl.log:
- @p='$<'; $(am__check_pre) $(PL_LOG_COMPILE) "$$tst" $(am__check_post)
+ @p='$<'; $(am__check_pre) $(PL_LOG_DRIVER) --test-name "$$f" \
+ --log-file '$*.log' --trs-file '$*.trs' \
+ $(am__common_driver_flags) $(AM_PL_LOG_DRIVER_FLAGS) $(PL_LOG_DRIVER_FLAGS) -- $(PL_LOG_COMPILE) "$$tst" \
+ $(AM_TESTS_FD_REDIRECT)
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-test -z "$(TEST_LOGS_TMP)" || rm -f $(TEST_LOGS_TMP)
-test -z "$(TEST_SUITE_HTML)" || rm -f $(TEST_SUITE_HTML)
-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+ -test -z "$(am__TEST_BASES:=.trs)" || rm -f $(am__TEST_BASES:=.trs)
clean-generic:
projects / platform / upstream / automake.git / blobdiff