\input texinfo
@setfilename ld.info
-@c Copyright 1991-2013 Free Software Foundation, Inc.
+@c Copyright (C) 1991-2014 Free Software Foundation, Inc.
@syncodeindex ky cp
@c man begin INCLUDE
@include configdoc.texi
@end ifset
version @value{VERSION}.
-Copyright @copyright{} 1991-2013 Free Software Foundation, Inc.
+Copyright @copyright{} 1991-2014 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
@vskip 0pt plus 1filll
@c man begin COPYRIGHT
-Copyright @copyright{} 1991-2013 Free Software Foundation, Inc.
+Copyright @copyright{} 1991-2014 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
option is specified.
If @var{searchdir} begins with @code{=}, then the @code{=} will be replaced
-by the @dfn{sysroot prefix}, a path specified when the linker is configured.
+by the @dfn{sysroot prefix}, controlled by the @samp{--sysroot} option, or
+specified when the linker is configured.
@ifset UsesEnvVars
The default set of paths searched (without being specified with
no difference in the linker's behaviour for different non-zero values
of this option. Again this may change with future releases.
+@kindex --push-state
+@cindex push state governing input file handling
+@item --push-state
+The @option{--push-state} allows to preserve the current state of the
+flags which govern the input file handling so that they can all be
+restored with one corresponding @option{--pop-state} option.
+
+The option which are covered are: @option{-Bdynamic}, @option{-Bstatic},
+@option{-dn}, @option{-dy}, @option{-call_shared}, @option{-non_shared},
+@option{-static}, @option{-N}, @option{-n}, @option{--whole-archive},
+@option{--no-whole-archive}, @option{-r}, @option{-Ur},
+@option{--copy-dt-needed-entries}, @option{--no-copy-dt-needed-entries},
+@option{--as-needed}, @option{--no-as-needed}, and @option{-a}.
+
+One target for this option are specifications for @file{pkg-config}. When
+used with the @option{--libs} option all possibly needed libraries are
+listed and then possibly linked with all the time. It is better to return
+something as follows:
+
+@smallexample
+-Wl,--push-state,--as-needed -libone -libtwo -Wl,--pop-state
+@end smallexample
+
+@kindex --pop-state
+@cindex pop state governing input file handling
+Undoes the effect of --push-state, restores the previous values of the
+flags governing input file handling.
+
@kindex -q
@kindex --emit-relocs
@cindex retain relocations in final executable
Specifying zero will override any default non-zero sized
@code{PT_GNU_STACK} segment creation.
+@item bndplt
+Always generate BND prefix in PLT entries. Supported for Linux/x86_64.
+
@end table
Other keywords are ignored for Solaris compatibility.
needed or not. @option{--as-needed} causes a DT_NEEDED tag to only be
emitted for a library that @emph{at that point in the link} satisfies a
non-weak undefined symbol reference from a regular object file or, if
-the library is not found in the DT_NEEDED lists of other libraries, a
-non-weak undefined symbol reference from another dynamic library.
+the library is not found in the DT_NEEDED lists of other needed libraries, a
+non-weak undefined symbol reference from another needed dynamic library.
Object files or libraries appearing on the command line @emph{after}
the library in question do not affect whether the library is seen as
needed. This is similar to the rules for extraction of object files
@option{--enable-new-dtags}, the new dynamic tags will be created as needed
and older dynamic tags will be omitted.
If you specify @option{--disable-new-dtags}, no new dynamic tags will be
-created. By default, the new dynamic tags are not created. Note that
+created. By default, the new dynamic tags are created. Note that
those options are only available for ELF systems.
@kindex --hash-size=@var{number}
@kindex --build-id=@var{style}
@item --build-id
@itemx --build-id=@var{style}
-Request creation of @code{.note.gnu.build-id} ELF note section.
-The contents of the note are unique bits identifying this linked
-file. @var{style} can be @code{uuid} to use 128 random bits,
-@code{sha1} to use a 160-bit @sc{SHA1} hash on the normative
-parts of the output contents, @code{md5} to use a 128-bit
-@sc{MD5} hash on the normative parts of the output contents, or
-@code{0x@var{hexstring}} to use a chosen bit string specified as
-an even number of hexadecimal digits (@code{-} and @code{:}
-characters between digit pairs are ignored). If @var{style} is
-omitted, @code{sha1} is used.
+Request the creation of a @code{.note.gnu.build-id} ELF note section
+or a @code{.build-id} COFF section. The contents of the note are
+unique bits identifying this linked file. @var{style} can be
+@code{uuid} to use 128 random bits, @code{sha1} to use a 160-bit
+@sc{SHA1} hash on the normative parts of the output contents,
+@code{md5} to use a 128-bit @sc{MD5} hash on the normative parts of
+the output contents, or @code{0x@var{hexstring}} to use a chosen bit
+string specified as an even number of hexadecimal digits (@code{-} and
+@code{:} characters between digit pairs are ignored). If @var{style}
+is omitted, @code{sha1} is used.
The @code{md5} and @code{sha1} styles produces an identifier
that is always the same in an identical output file, but will be
@kindex --enable-auto-image-base
@item --enable-auto-image-base
-Automatically choose the image base for DLLs, unless one is specified
-using the @code{--image-base} argument. By using a hash generated
-from the dllname to create unique image bases for each DLL, in-memory
-collisions and relocations which can delay program execution are
-avoided.
+@itemx --enable-auto-image-base=@var{value}
+Automatically choose the image base for DLLs, optionally starting with base
+@var{value}, unless one is specified using the @code{--image-base} argument.
+By using a hash generated from the dllname to create unique image bases
+for each DLL, in-memory collisions and relocations which can delay program
+execution are avoided.
[This option is specific to the i386 PE targeted port of the linker]
@kindex --disable-auto-image-base
of the PE file header:
[These options are specific to PE targeted ports of the linker]
+@kindex --high-entropy-va
+@item --high-entropy-va
+Image is compatible with 64-bit address space layout randomization
+(ASLR).
+
@kindex --dynamicbase
@item --dynamicbase
The image base address may be relocated using address space layout
@kindex --insert-timestamp
@item --insert-timestamp
-Insert a real timestamp into the image, rather than the default value
-of zero. This will result in a slightly different results with each
-invocation, which could be helpful for distributing unique images.
+@itemx --no-insert-timestamp
+Insert a real timestamp into the image. This is the default behaviour
+as it matches legacy code and it means that the image will work with
+other, proprietary tools. The problem with this default is that it
+will result in slightly different images being produced each tiem the
+same sources are linked. The option @option{--no-insert-timestamp}
+can be used to insert a zero value for the timestamp, this ensuring
+that binaries produced from indentical sources will compare
+identically.
@end table
@c man end
located inside the @dfn{sysroot prefix}, the filename will be looked
for in the @dfn{sysroot prefix}. Otherwise, the linker will try to
open the file in the current directory. If it is not found, the
-linker will search through the archive library search path. See the
+linker will search through the archive library search path.
+The @dfn{sysroot prefix} can also be forced by specifying @code{=}
+as the first character in the filename path. See also the
description of @samp{-L} in @ref{Options,,Command Line Options}.
If you use @samp{INPUT (-l@var{file})}, @command{ld} will transform the
@var{output-section-command}
@var{output-section-command}
@dots{}
- @} [>@var{region}] [AT>@var{lma_region}] [:@var{phdr} :@var{phdr} @dots{}] [=@var{fillexp}]
+ @} [>@var{region}] [AT>@var{lma_region}] [:@var{phdr} :@var{phdr} @dots{}] [=@var{fillexp}] [,]
@end group
@end smallexample
The whitespace around @var{section} is required, so that the section
name is unambiguous. The colon and the curly braces are also required.
+The comma at the end may be required if a @var{fillexp} is used and
+the next @var{sections-command} looks like a continuation of the expression.
The line breaks and other white space are optional.
Each @var{output-section-command} may be one of the following:
@dots{}
@} [:@var{phdr}@dots{}] [=@var{fill}]
@dots{}
- @} [>@var{region}] [:@var{phdr}@dots{}] [=@var{fill}]
+ @} [>@var{region}] [:@var{phdr}@dots{}] [=@var{fill}] [,]
@end group
@end smallexample
except that no addresses and no memory regions may be defined for
sections within an @code{OVERLAY}.
+The comma at the end may be required if a @var{fill} is used and
+the next @var{sections-command} looks like a continuation of the expression.
+
The sections are all defined with the same starting address. The load
addresses of the sections are arranged such that they are consecutive in
memory starting at the load address used for the @code{OVERLAY} as a
target subroutine is a leaf routine (that is, the target subroutine does
not itself call any subroutines).
-@cindex Cortex-A8 erratum workaround
-@kindex --fix-cortex-a8
-@kindex --no-fix-cortex-a8
-The @samp{--fix-cortex-a8} switch enables a link-time workaround for an erratum in certain Cortex-A8 processors. The workaround is enabled by default if you are targeting the ARM v7-A architecture profile. It can be enabled otherwise by specifying @samp{--fix-cortex-a8}, or disabled unconditionally by specifying @samp{--no-fix-cortex-a8}.
-
-The erratum only affects Thumb-2 code. Please contact ARM for further details.
-
-@kindex --merge-exidx-entries
-@kindex --no-merge-exidx-entries
-The @samp{--no-merge-exidx-entries} switch disables the merging of adjacent exidx entries in debuginfo.
-
@ifclear GENERIC
@lowersections
@end ifclear
only, because it relies on object files properties not present
otherwise.
+@cindex Cortex-A8 erratum workaround
+@kindex --fix-cortex-a8
+@kindex --no-fix-cortex-a8
+The @samp{--fix-cortex-a8} switch enables a link-time workaround for an erratum in certain Cortex-A8 processors. The workaround is enabled by default if you are targeting the ARM v7-A architecture profile. It can be enabled otherwise by specifying @samp{--fix-cortex-a8}, or disabled unconditionally by specifying @samp{--no-fix-cortex-a8}.
+
+The erratum only affects Thumb-2 code. Please contact ARM for further details.
+
+@cindex Cortex-A53 erratum 835769 workaround
+@kindex --fix-cortex-a53-835769
+@kindex --no-fix-cortex-a53-835769
+The @samp{--fix-cortex-a53-835769} switch enables a link-time workaround for erratum 835769 present on certain early revisions of Cortex-A53 processors. The workaround is disabled by default. It can be enabled by specifying @samp{--fix-cortex-a53-835769}, or disabled unconditionally by specifying @samp{--no-fix-cortex-a53-835769}.
+
+Please contact ARM for further details.
+
+@kindex --merge-exidx-entries
+@kindex --no-merge-exidx-entries
+@cindex Merging exidx entries
+The @samp{--no-merge-exidx-entries} switch disables the merging of adjacent exidx entries in debuginfo.
+
+@kindex --long-plt
+@cindex 32-bit PLT entries
+The @samp{--long-plt} option enables the use of 16 byte PLT entries
+which support up to 4Gb of code. The default is to use 12 byte PLT
+entries which only support 512Mb of code.
+
@ifclear GENERIC
@lowersections
@end ifclear
@item --plt-align
@itemx --no-plt-align
Use these options to control whether individual PLT call stubs are
-aligned to a 32-byte boundary, or to the specified power of two
-boundary when using @code{--plt-align=}. By default PLT call stubs
-are packed tightly.
+padded so that they don't cross a 32-byte boundary, or to the
+specified power of two boundary when using @code{--plt-align=}. Note
+that this isn't alignment in the usual sense. By default PLT call
+stubs are packed tightly.
@cindex PowerPC64 PLT call stub static chain
@kindex --plt-static-chain
but will fail to respect the alignment instructions, and may issue noisy
warnings about unknown linker directives.
-@cindex default manifest
-@item default manifest
-The linker will automatically add a default manifest to the .rsrc
-section of any fully linked cygwin or MingGW binary. This manifest is
-necessary in order to be able to execute the binary under Windows 8
-(or later). An application can supply its own manifest, and if it
-does so then this manifest will be used in preference to the default
-one.
@end table
@ifclear GENERIC