\input texinfo
@setfilename ld.info
-@c Copyright 1991-2013 Free Software Foundation, Inc.
+@c Copyright (C) 1991-2014 Free Software Foundation, Inc.
@syncodeindex ky cp
@c man begin INCLUDE
@include configdoc.texi
@set I960
@set M68HC11
@set M68K
+@set MIPS
@set MMIX
@set MSP430
+@set NDS32
+@set NIOSII
@set POWERPC
@set POWERPC64
@set Renesas
@end ifset
version @value{VERSION}.
-Copyright @copyright{} 1991-2013 Free Software Foundation, Inc.
+Copyright @copyright{} 1991-2014 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
@vskip 0pt plus 1filll
@c man begin COPYRIGHT
-Copyright @copyright{} 1991-2013 Free Software Foundation, Inc.
+Copyright @copyright{} 1991-2014 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
@ifset M68K
* M68K:: ld and Motorola 68K family
@end ifset
+@ifset MIPS
+* MIPS:: ld and MIPS family
+@end ifset
@ifset POWERPC
* PowerPC ELF32:: ld and PowerPC 32-bit ELF Support
@end ifset
@itemx --gpsize=@var{value}
Set the maximum size of objects to be optimized using the GP register to
@var{size}. This is only meaningful for object file formats such as
-MIPS ECOFF which supports putting large and small objects into different
+MIPS ELF that support putting large and small objects into different
sections. This is ignored for other object file formats.
@cindex runtime library name
option is specified.
If @var{searchdir} begins with @code{=}, then the @code{=} will be replaced
-by the @dfn{sysroot prefix}, a path specified when the linker is configured.
+by the @dfn{sysroot prefix}, controlled by the @samp{--sysroot} option, or
+specified when the linker is configured.
@ifset UsesEnvVars
The default set of paths searched (without being specified with
no difference in the linker's behaviour for different non-zero values
of this option. Again this may change with future releases.
+@kindex --push-state
+@cindex push state governing input file handling
+@item --push-state
+The @option{--push-state} allows to preserve the current state of the
+flags which govern the input file handling so that they can all be
+restored with one corresponding @option{--pop-state} option.
+
+The option which are covered are: @option{-Bdynamic}, @option{-Bstatic},
+@option{-dn}, @option{-dy}, @option{-call_shared}, @option{-non_shared},
+@option{-static}, @option{-N}, @option{-n}, @option{--whole-archive},
+@option{--no-whole-archive}, @option{-r}, @option{-Ur},
+@option{--copy-dt-needed-entries}, @option{--no-copy-dt-needed-entries},
+@option{--as-needed}, @option{--no-as-needed}, and @option{-a}.
+
+One target for this option are specifications for @file{pkg-config}. When
+used with the @option{--libs} option all possibly needed libraries are
+listed and then possibly linked with all the time. It is better to return
+something as follows:
+
+@smallexample
+-Wl,--push-state,--as-needed -libone -libtwo -Wl,--pop-state
+@end smallexample
+
+@kindex --pop-state
+@cindex pop state governing input file handling
+Undoes the effect of --push-state, restores the previous values of the
+flags governing input file handling.
+
@kindex -q
@kindex --emit-relocs
@cindex retain relocations in final executable
Specifying zero will override any default non-zero sized
@code{PT_GNU_STACK} segment creation.
+@item bndplt
+Always generate BND prefix in PLT entries. Supported for Linux/x86_64.
+
@end table
Other keywords are ignored for Solaris compatibility.
needed or not. @option{--as-needed} causes a DT_NEEDED tag to only be
emitted for a library that @emph{at that point in the link} satisfies a
non-weak undefined symbol reference from a regular object file or, if
-the library is not found in the DT_NEEDED lists of other libraries, a
-non-weak undefined symbol reference from another dynamic library.
+the library is not found in the DT_NEEDED lists of other needed libraries, a
+non-weak undefined symbol reference from another needed dynamic library.
Object files or libraries appearing on the command line @emph{after}
the library in question do not affect whether the library is seen as
needed. This is similar to the rules for extraction of object files
easily processed by a script if necessary. The symbols are printed out,
sorted by name. For each symbol, a list of file names is given. If the
symbol is defined, the first file listed is the location of the
-definition. The remaining files contain references to the symbol.
+definition. If the symbol is defined as a common value then any files
+where this happens appear next. Finally any files that reference the
+symbol are listed.
@cindex common allocation
@kindex --no-define-common
@ifset M68HC11
@xref{M68HC11/68HC12,,@command{ld} and the 68HC11 and 68HC12}.
@end ifset
+@ifset NIOSII
+@xref{Nios II,,@command{ld} and the Altera Nios II}.
+@end ifset
@ifset POWERPC
@xref{PowerPC ELF32,,@command{ld} and PowerPC 32-bit ELF Support}.
@end ifset
@kindex -Ttext-segment=@var{org}
@item -Ttext-segment=@var{org}
@cindex text segment origin, cmd line
-When creating an ELF executable or shared object, it will set the address
-of the first byte of the text segment.
+When creating an ELF executable, it will set the address of the first
+byte of the text segment.
@kindex -Trodata-segment=@var{org}
@item -Trodata-segment=@var{org}
@kindex --build-id=@var{style}
@item --build-id
@itemx --build-id=@var{style}
-Request creation of @code{.note.gnu.build-id} ELF note section.
-The contents of the note are unique bits identifying this linked
-file. @var{style} can be @code{uuid} to use 128 random bits,
-@code{sha1} to use a 160-bit @sc{SHA1} hash on the normative
-parts of the output contents, @code{md5} to use a 128-bit
-@sc{MD5} hash on the normative parts of the output contents, or
-@code{0x@var{hexstring}} to use a chosen bit string specified as
-an even number of hexadecimal digits (@code{-} and @code{:}
-characters between digit pairs are ignored). If @var{style} is
-omitted, @code{sha1} is used.
+Request the creation of a @code{.note.gnu.build-id} ELF note section
+or a @code{.build-id} COFF section. The contents of the note are
+unique bits identifying this linked file. @var{style} can be
+@code{uuid} to use 128 random bits, @code{sha1} to use a 160-bit
+@sc{SHA1} hash on the normative parts of the output contents,
+@code{md5} to use a 128-bit @sc{MD5} hash on the normative parts of
+the output contents, or @code{0x@var{hexstring}} to use a chosen bit
+string specified as an even number of hexadecimal digits (@code{-} and
+@code{:} characters between digit pairs are ignored). If @var{style}
+is omitted, @code{sha1} is used.
The @code{md5} and @code{sha1} styles produces an identifier
that is always the same in an identical output file, but will be
@item --heap @var{reserve}
@itemx --heap @var{reserve},@var{commit}
Specify the number of bytes of memory to reserve (and optionally commit)
-to be used as heap for this program. The default is 1Mb reserved, 4K
+to be used as heap for this program. The default is 1MB reserved, 4K
committed.
[This option is specific to the i386 PE targeted port of the linker]
section of the BOOT.INI. Otherwise, this bit has no effect.
[This option is specific to PE targeted ports of the linker]
+@kindex --disable-large-address-aware
+@item --disable-large-address-aware
+Reverts the effect of a previous @samp{--large-address-aware} option.
+This is useful if @samp{--large-address-aware} is always set by the compiler
+driver (e.g. Cygwin gcc) and the executable does not support virtual
+addresses greater than 2 gigabytes.
+[This option is specific to PE targeted ports of the linker]
+
@kindex --major-image-version
@item --major-image-version @var{value}
Sets the major number of the ``image version''. Defaults to 1.
@kindex --enable-auto-image-base
@item --enable-auto-image-base
-Automatically choose the image base for DLLs, unless one is specified
-using the @code{--image-base} argument. By using a hash generated
-from the dllname to create unique image bases for each DLL, in-memory
-collisions and relocations which can delay program execution are
-avoided.
+@itemx --enable-auto-image-base=@var{value}
+Automatically choose the image base for DLLs, optionally starting with base
+@var{value}, unless one is specified using the @code{--image-base} argument.
+By using a hash generated from the dllname to create unique image bases
+for each DLL, in-memory collisions and relocations which can delay program
+execution are avoided.
[This option is specific to the i386 PE targeted port of the linker]
@kindex --disable-auto-image-base
@kindex --disable-runtime-pseudo-reloc
@item --disable-runtime-pseudo-reloc
Do not create pseudo relocations for non-zero offset DATA imports from
-DLLs. This is the default.
+DLLs.
[This option is specific to the i386 PE targeted port of the linker]
@kindex --enable-extra-pe-debug
@item --stack @var{reserve}
@itemx --stack @var{reserve},@var{commit}
Specify the number of bytes of memory to reserve (and optionally commit)
-to be used as stack for this program. The default is 2Mb reserved, 4K
+to be used as stack for this program. The default is 2MB reserved, 4K
committed.
[This option is specific to the i386 PE targeted port of the linker]
of the PE file header:
[These options are specific to PE targeted ports of the linker]
+@kindex --high-entropy-va
+@item --high-entropy-va
+Image is compatible with 64-bit address space layout randomization
+(ASLR).
+
@kindex --dynamicbase
@item --dynamicbase
The image base address may be relocated using address space layout
@item --tsaware
The image is Terminal Server aware.
+@kindex --insert-timestamp
+@item --insert-timestamp
+@itemx --no-insert-timestamp
+Insert a real timestamp into the image. This is the default behaviour
+as it matches legacy code and it means that the image will work with
+other, proprietary tools. The problem with this default is that it
+will result in slightly different images being produced each tiem the
+same sources are linked. The option @option{--no-insert-timestamp}
+can be used to insert a zero value for the timestamp, this ensuring
+that binaries produced from indentical sources will compare
+identically.
@end table
@c man end
@c man end
@end ifset
+@ifset MIPS
+@subsection Options specific to MIPS targets
+
+@c man begin OPTIONS
+
+The following options are supported to control microMIPS instruction
+generation when linking for MIPS targets.
+
+@table @gcctabopt
+
+@kindex --insn32
+@item --insn32
+@kindex --no-insn32
+@itemx --no-insn32
+These options control the choice of microMIPS instructions used in code
+generated by the linker, such as that in the PLT or lazy binding stubs,
+or in relaxation. If @samp{--insn32} is used, then the linker only uses
+32-bit instruction encodings. By default or if @samp{--no-insn32} is
+used, all instruction encodings are used, including 16-bit ones where
+possible.
+
+@end table
+
+@c man end
+@end ifset
+
@ifset UsesEnvVars
@node Environment
@section Environment Variables
located inside the @dfn{sysroot prefix}, the filename will be looked
for in the @dfn{sysroot prefix}. Otherwise, the linker will try to
open the file in the current directory. If it is not found, the
-linker will search through the archive library search path. See the
+linker will search through the archive library search path.
+The @dfn{sysroot prefix} can also be forced by specifying @code{=}
+as the first character in the filename path. See also the
description of @samp{-L} in @ref{Options,,Command Line Options}.
If you use @samp{INPUT (-l@var{file})}, @command{ld} will transform the
int foo = 1000;
@end smallexample
-creates a entry called @samp{foo} in the symbol table. This entry
+creates an entry called @samp{foo} in the symbol table. This entry
holds the address of an @samp{int} sized block of memory where the
number 1000 is initially stored.
int * a = & foo;
@end smallexample
-looks up the symbol @samp{foo} in the symbol table, gets it address
+looks up the symbol @samp{foo} in the symbol table, gets its address
and then copies this address into the block of memory associated with
the variable @samp{a}.
@group
@var{section} [@var{address}] [(@var{type})] :
[AT(@var{lma})]
- [ALIGN(@var{section_align})]
+ [ALIGN(@var{section_align}) | ALIGN_WITH_INPUT]
[SUBALIGN(@var{subsection_align})]
[@var{constraint}]
@{
@var{output-section-command}
@var{output-section-command}
@dots{}
- @} [>@var{region}] [AT>@var{lma_region}] [:@var{phdr} :@var{phdr} @dots{}] [=@var{fillexp}]
+ @} [>@var{region}] [AT>@var{lma_region}] [:@var{phdr} :@var{phdr} @dots{}] [=@var{fillexp}] [,]
@end group
@end smallexample
The whitespace around @var{section} is required, so that the section
name is unambiguous. The colon and the curly braces are also required.
+The comma at the end may be required if a @var{fillexp} is used and
+the next @var{sections-command} looks like a continuation of the expression.
The line breaks and other white space are optional.
Each @var{output-section-command} may be one of the following:
@cindex SORT_BY_ALIGNMENT
@code{SORT_BY_ALIGNMENT} is very similar to @code{SORT_BY_NAME}. The
difference is @code{SORT_BY_ALIGNMENT} will sort sections into
-ascending order by alignment before placing them in the output file.
+descending order by alignment before placing them in the output file.
+Larger alignments are placed before smaller alignments in order to
+reduce the amount of padding necessary.
@cindex SORT_BY_INIT_PRIORITY
@code{SORT_BY_INIT_PRIORITY} is very similar to @code{SORT_BY_NAME}. The
@enumerate
@item
@code{SORT_BY_NAME} (@code{SORT_BY_ALIGNMENT} (wildcard section pattern)).
-It will sort the input sections by name first, then by alignment if 2
+It will sort the input sections by name first, then by alignment if two
sections have the same name.
@item
@code{SORT_BY_ALIGNMENT} (@code{SORT_BY_NAME} (wildcard section pattern)).
-It will sort the input sections by alignment first, then by name if 2
+It will sort the input sections by alignment first, then by name if two
sections have the same alignment.
@item
@code{SORT_BY_NAME} (@code{SORT_BY_NAME} (wildcard section pattern)) is
@cindex discarding sections
@cindex sections, discarding
@cindex removing sections
-The linker will not create output sections with no contents. This is
-for convenience when referring to input sections that may or may not
-be present in any of the input files. For example:
+The linker will not normally create output sections with no contents.
+This is for convenience when referring to input sections that may or
+may not be present in any of the input files. For example:
@smallexample
.foo : @{ *(.foo) @}
@end smallexample
will only create a @samp{.foo} section in the output file if there is a
@samp{.foo} section in at least one input file, and if the input
sections are not all empty. Other link script directives that allocate
-space in an output section will also create the output section.
+space in an output section will also create the output section. So
+too will assignments to dot even if the assignment does not create
+space, except for @samp{. = 0}, @samp{. = . + 0}, @samp{. = sym},
+@samp{. = . + sym} and @samp{. = ALIGN (. != 0, expr, 1)} when
+@samp{sym} is an absolute symbol of value 0 defined in the script.
+This allows you to force output of an empty section with @samp{. = .}.
The linker will ignore address assignments (@pxref{Output Section Address})
on discarded output sections, except when the linker script defines
@kindex ALIGN(@var{section_align})
@cindex forcing output section alignment
@cindex output section alignment
-You can increase an output section's alignment by using ALIGN.
+You can increase an output section's alignment by using ALIGN. As an
+alternative you can enforce that the difference between the VMA and LMA remains
+intact throughout this output section with the ALIGN_WITH_INPUT attribute.
@node Forced Input Alignment
@subsubsection Forced Input Alignment
@dots{}
@} [:@var{phdr}@dots{}] [=@var{fill}]
@dots{}
- @} [>@var{region}] [:@var{phdr}@dots{}] [=@var{fill}]
+ @} [>@var{region}] [:@var{phdr}@dots{}] [=@var{fill}] [,]
@end group
@end smallexample
except that no addresses and no memory regions may be defined for
sections within an @code{OVERLAY}.
+The comma at the end may be required if a @var{fill} is used and
+the next @var{sections-command} looks like a continuation of the expression.
+
The sections are all defined with the same starting address. The load
addresses of the sections are arranged such that they are consecutive in
memory starting at the load address used for the @code{OVERLAY} as a
@item DATA_SEGMENT_RELRO_END(@var{offset}, @var{exp})
@kindex DATA_SEGMENT_RELRO_END(@var{offset}, @var{exp})
This defines the end of the @code{PT_GNU_RELRO} segment when
-@samp{-z relro} option is used. Second argument is returned.
+@samp{-z relro} option is used.
When @samp{-z relro} option is not present, @code{DATA_SEGMENT_RELRO_END}
does nothing, otherwise @code{DATA_SEGMENT_ALIGN} is padded so that
@var{exp} + @var{offset} is aligned to the most commonly used page
boundary for particular target. If present in the linker script,
it must always come in between @code{DATA_SEGMENT_ALIGN} and
-@code{DATA_SEGMENT_END}.
+@code{DATA_SEGMENT_END}. Evaluates to the second argument plus any
+padding needed at the end of the @code{PT_GNU_RELRO} segment due to
+section alignment.
@smallexample
. = DATA_SEGMENT_RELRO_END(24, .);
Return the absolute LMA of the named @var{section}. (@pxref{Output
Section LMA}).
+@item LOG2CEIL(@var{exp})
+@kindex LOG2CEIL(@var{exp})
+Return the binary logarithm of @var{exp} rounded towards infinity.
+@code{LOG2CEIL(0)} returns 0.
+
@kindex MAX
@item MAX(@var{exp1}, @var{exp2})
Returns the maximum of @var{exp1} and @var{exp2}.
@item SEGMENT_START(@var{segment}, @var{default})
@kindex SEGMENT_START(@var{segment}, @var{default})
Return the base address of the named @var{segment}. If an explicit
-value has been given for this segment (with a command-line @samp{-T}
-option) that value will be returned; otherwise the value will be
-@var{default}. At present, the @samp{-T} command-line option can only
-be used to set the base address for the ``text'', ``data'', and
+value has already been given for this segment (with a command-line
+@samp{-T} option) then that value will be returned otherwise the value
+will be @var{default}. At present, the @samp{-T} command-line option
+can only be used to set the base address for the ``text'', ``data'', and
``bss'' sections, but you can use @code{SEGMENT_START} with any segment
name.
@ifset M68K
* M68K:: @command{ld} and the Motorola 68K family
@end ifset
+@ifset MIPS
+* MIPS:: @command{ld} and the MIPS family
+@end ifset
@ifset MMIX
* MMIX:: @command{ld} and MMIX
@end ifset
@ifset MSP430
* MSP430:: @command{ld} and MSP430
@end ifset
+@ifset NDS32
+* NDS32:: @command{ld} and NDS32
+@end ifset
+@ifset NIOSII
+* Nios II:: @command{ld} and the Altera Nios II
+@end ifset
@ifset POWERPC
* PowerPC ELF32:: @command{ld} and PowerPC 32-bit ELF Support
@end ifset
target subroutine is a leaf routine (that is, the target subroutine does
not itself call any subroutines).
-@cindex Cortex-A8 erratum workaround
-@kindex --fix-cortex-a8
-@kindex --no-fix-cortex-a8
-The @samp{--fix-cortex-a8} switch enables a link-time workaround for an erratum in certain Cortex-A8 processors. The workaround is enabled by default if you are targeting the ARM v7-A architecture profile. It can be enabled otherwise by specifying @samp{--fix-cortex-a8}, or disabled unconditionally by specifying @samp{--no-fix-cortex-a8}.
-
-The erratum only affects Thumb-2 code. Please contact ARM for further details.
-
-@kindex --merge-exidx-entries
-@kindex --no-merge-exidx-entries
-The @samp{--no-merge-exidx-entries} switch disables the merging of adjacent exidx entries in debuginfo.
-
@ifclear GENERIC
@lowersections
@end ifclear
only, because it relies on object files properties not present
otherwise.
+@cindex Cortex-A8 erratum workaround
+@kindex --fix-cortex-a8
+@kindex --no-fix-cortex-a8
+The @samp{--fix-cortex-a8} switch enables a link-time workaround for an erratum in certain Cortex-A8 processors. The workaround is enabled by default if you are targeting the ARM v7-A architecture profile. It can be enabled otherwise by specifying @samp{--fix-cortex-a8}, or disabled unconditionally by specifying @samp{--no-fix-cortex-a8}.
+
+The erratum only affects Thumb-2 code. Please contact ARM for further details.
+
+@cindex Cortex-A53 erratum 835769 workaround
+@kindex --fix-cortex-a53-835769
+@kindex --no-fix-cortex-a53-835769
+The @samp{--fix-cortex-a53-835769} switch enables a link-time workaround for erratum 835769 present on certain early revisions of Cortex-A53 processors. The workaround is disabled by default. It can be enabled by specifying @samp{--fix-cortex-a53-835769}, or disabled unconditionally by specifying @samp{--no-fix-cortex-a53-835769}.
+
+Please contact ARM for further details.
+
+@kindex --merge-exidx-entries
+@kindex --no-merge-exidx-entries
+@cindex Merging exidx entries
+The @samp{--no-merge-exidx-entries} switch disables the merging of adjacent exidx entries in debuginfo.
+
+@kindex --long-plt
+@cindex 32-bit PLT entries
+The @samp{--long-plt} option enables the use of 16 byte PLT entries
+which support up to 4Gb of code. The default is to use 12 byte PLT
+entries which only support 512Mb of code.
+
@ifclear GENERIC
@lowersections
@end ifclear
@end ifclear
@end ifset
+@ifset MIPS
+@ifclear GENERIC
+@raisesections
+@end ifclear
+
+@node MIPS
+@section @command{ld} and the MIPS family
+
+@cindex MIPS microMIPS instruction choice selection
+@kindex --insn32
+@kindex --no-insn32
+The @samp{--insn32} and @samp{--no-insn32} options control the choice of
+microMIPS instructions used in code generated by the linker, such as that
+in the PLT or lazy binding stubs, or in relaxation. If @samp{--insn32} is
+used, then the linker only uses 32-bit instruction encodings. By default
+or if @samp{--no-insn32} is used, all instruction encodings are used,
+including 16-bit ones where possible.
+
+@ifclear GENERIC
+@lowersections
+@end ifclear
+@end ifset
+
@ifset MMIX
@ifclear GENERIC
@raisesections
@end ifclear
@end ifset
+@ifset NDS32
+@ifclear GENERIC
+@raisesections
+@end ifclear
+
+@node NDS32
+@section @code{ld} and NDS32
+@kindex relaxing on NDS32
+For NDS32, there are some options to select relaxation behavior. The linker
+relaxes objects according to these options.
+
+@table @code
+@item @samp{--m[no-]fp-as-gp}
+Disable/enable fp-as-gp relaxation.
+
+@item @samp{--mexport-symbols=FILE}
+Exporting symbols and their address into FILE as linker script.
+
+@item @samp{--m[no-]ex9}
+Disable/enable link-time EX9 relaxation.
+
+@item @samp{--mexport-ex9=FILE}
+Export the EX9 table after linking.
+
+@item @samp{--mimport-ex9=FILE}
+Import the Ex9 table for EX9 relaxation.
+
+@item @samp{--mupdate-ex9}
+Update the existing EX9 table.
+
+@item @samp{--mex9-limit=NUM}
+Maximum number of entries in the ex9 table.
+
+@item @samp{--mex9-loop-aware}
+Avoid generating the EX9 instruction inside the loop.
+
+@item @samp{--m[no-]ifc}
+Disable/enable the link-time IFC optimization.
+
+@item @samp{--mifc-loop-aware}
+Avoid generating the IFC instruction inside the loop.
+@end table
+
+@ifclear GENERIC
+@lowersections
+@end ifclear
+@end ifset
+
+@ifset NIOSII
+@ifclear GENERIC
+@raisesections
+@end ifclear
+
+@node Nios II
+@section @command{ld} and the Altera Nios II
+@cindex Nios II call relaxation
+@kindex --relax on Nios II
+
+Call and immediate jump instructions on Nios II processors are limited to
+transferring control to addresses in the same 256MB memory segment,
+which may result in @command{ld} giving
+@samp{relocation truncated to fit} errors with very large programs.
+The command-line option @option{--relax} enables the generation of
+trampolines that can access the entire 32-bit address space for calls
+outside the normal @code{call} and @code{jmpi} address range. These
+trampolines are inserted at section boundaries, so may not themselves
+be reachable if an input section and its associated call trampolines are
+larger than 256MB.
+
+The @option{--relax} option is enabled by default unless @option{-r}
+is also specified. You can disable trampoline generation by using the
+@option{--no-relax} linker option. You can also disable this optimization
+locally by using the @samp{set .noat} directive in assembly-language
+source files, as the linker-inserted trampolines use the @code{at}
+register as a temporary.
+
+Note that the linker @option{--relax} option is independent of assembler
+relaxation options, and that using the GNU assembler's @option{-relax-all}
+option interferes with the linker's more selective call instruction relaxation.
+
+@ifclear GENERIC
+@lowersections
+@end ifclear
+@end ifset
+
@ifset POWERPC
@ifclear GENERIC
@raisesections
@item --plt-align
@itemx --no-plt-align
Use these options to control whether individual PLT call stubs are
-aligned to a 32-byte boundary, or to the specified power of two
-boundary when using @code{--plt-align=}. By default PLT call stubs
-are packed tightly.
+padded so that they don't cross a 32-byte boundary, or to the
+specified power of two boundary when using @code{--plt-align=}. Note
+that this isn't alignment in the usual sense. By default PLT call
+stubs are packed tightly.
@cindex PowerPC64 PLT call stub static chain
@kindex --plt-static-chain
tools will be able to process object files employing this GNU extension,
but will fail to respect the alignment instructions, and may issue noisy
warnings about unknown linker directives.
+
@end table
@ifclear GENERIC
projects / platform / upstream / binutils.git / blobdiff