-# This file is a shell script fragment that supplies the information
-# necessary to tailor a template configure script into the configure
-# script appropriate for this directory. For more information, check
-# any existing configure script.
-
-srctrigger=ldmain.c
-srcname="linker"
-target_dependent=true
-
-# per-host:
-
-case "${host}" in
-
- rs6000-ibm-aix*) my_host=rs6000
- ;;
- hppa*-hp-hpux) my_host=hppahpux
- ;;
- hppa*-hp-bsd) my_host=hppabsd
- ;;
- mips-dec-ultrix*) my_host=decstation
- ;;
- mips-sgi-irix3*) my_host=irix3
- ;;
- mips-sgi-irix4*) my_host=irix4
- ;;
- m88k-motorola-*) my_host=delta88
- ;;
- m88k-dg-dgux*) my_host=dgux
- ;;
- m68k-cbm-amigados) my_host=amigados
- ;;
- m68k-cbm-svr4) my_host=amix
- ;;
- m68k-hp-hpux) my_host=hp300
- ;;
- m68k-hp-bsd) my_host=hp300bsd
- ;;
- m68k-apollo*-sysv*) my_host=apollov68
- ;;
- m68k-apollo*-bsd*) my_host=apollo68
- ;;
- m68k-sony-*) my_host=news
- ;;
- m68k-sun-sunos*) my_host=sun3
- ;;
- i386-go32-*) my_host=go32
- ;;
- i386-*-sysv) my_host=i386v
- ;;
- i386-*-isc) my_host=isc
- ;;
- i386-*-mach) my_host=i386mach
- ;;
- i386-*-bsd) my_host=i386-aout
- ;;
- i386-*-msdos) my_host=dose
- ;;
- sparc-sun-sunos64) my_host=sparc-ll
- ;;
- sparc-sun-sunos4*) my_host=sparc
- ;;
- sparc-sun-solaris2) my_host=solaris2
- ;;
- romp-*-*) my_host=rtbsd
- ;;
- a29k-*-*) my_host=ultra3
- ;;
- tahoe-*-*) my_host=tahoe
- ;;
- vax-dec-ultrix*) my_host=vaxult
- ;;
- vax-dec-bsd*) my_host=vaxbsd
- ;;
+dnl Process this file with autoconf to produce a configure script
+dnl
+AC_PREREG(2.13)
+AC_INIT(ldmain.c)
+
+AC_CANONICAL_SYSTEM
+
+AM_INIT_AUTOMAKE(ld, 2.10.91)
+
+AM_PROG_LIBTOOL
+
+AC_ARG_ENABLE(targets,
+[ --enable-targets alternative target configurations],
+[case "${enableval}" in
+ yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
+ ;;
+ no) enable_targets= ;;
+ *) enable_targets=$enableval ;;
+esac])dnl
+AC_ARG_ENABLE(64-bit-bfd,
+[ --enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)],
+[case "${enableval}" in
+ yes) want64=true ;;
+ no) want64=false ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for 64-bit-bfd option) ;;
+esac],[want64=false])dnl
+
+build_warnings="-W -Wall"
+AC_ARG_ENABLE(build-warnings,
+[ --enable-build-warnings Enable build-time compiler warnings if gcc is used],
+[case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting warning flags = $build_warnings" 6>&1
+fi])dnl
+WARN_CFLAGS=""
+if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then
+ WARN_CFLAGS="${build_warnings}"
+fi
+AC_SUBST(WARN_CFLAGS)
+
+AM_CONFIG_HEADER(config.h:config.in)
+
+if test -z "$target" ; then
+ AC_MSG_ERROR(Unrecognized target system type; please check config.sub.)
+fi
+if test -z "$host" ; then
+ AC_MSG_ERROR(Unrecognized host system type; please check config.sub.)
+fi
+
+# host-specific stuff:
+
+AC_PROG_CC
+AC_PROG_INSTALL
+
+ALL_LINGUAS=
+CY_GNU_GETTEXT
+
+AC_EXEEXT
+
+AC_PROG_YACC
+AM_PROG_LEX
+
+AM_MAINTAINER_MODE
+
+. ${srcdir}/configure.host
-# Set up to make a link between the host's include file and "sysdep.h".
-files="../bfd/hosts/${my_host}.h"
-links="sysdep.h"
+AC_SUBST(HDEFINES)
+AC_SUBST(HOSTING_CRT0)
+AC_SUBST(HOSTING_LIBS)
+AC_SUBST(NATIVE_LIB_DIRS)
-if [ ! -f ${srcdir}/${files} ] ; then
- if [ -n "${my_host}" ] ; then
- echo '***' No file ${srcdir}/${files} 1>&2
- fi
- echo '***' ${srcname} does not support host ${host} 1>&2
- exit 1
+AC_CHECK_HEADERS(string.h strings.h stdlib.h unistd.h)
+AC_CHECK_FUNCS(sbrk)
+AC_HEADER_DIRENT
+
+BFD_BINARY_FOPEN
+
+BFD_NEED_DECLARATION(strstr)
+BFD_NEED_DECLARATION(free)
+BFD_NEED_DECLARATION(sbrk)
+BFD_NEED_DECLARATION(getenv)
+BFD_NEED_DECLARATION(environ)
+
+# When converting linker scripts into strings for use in emulation
+# files, use astring.sed if the compiler supports ANSI string
+# concatenation, or ostring.sed otherwise. This is to support the
+# broken Microsoft MSVC compiler, which limits the length of string
+# constants, while still supporting pre-ANSI compilers which do not
+# support string concatenation.
+AC_MSG_CHECKING([whether ANSI C string concatenation works])
+AC_CACHE_VAL(ld_cv_string_concatenation,
+[AC_TRY_COMPILE(,[char *a = "a" "a";],
+ [ld_cv_string_concatenation=yes],
+ [ld_cv_string_concatenation=no])])
+AC_MSG_RESULT($ld_cv_string_concatenation)
+if test "$ld_cv_string_concatenation" = "yes"; then
+ STRINGIFY=astring.sed
+else
+ STRINGIFY=ostring.sed
fi
+AC_SUBST(STRINGIFY)
+
+# target-specific stuff:
+
+all_targets=
+EMUL=
+all_emuls=
+all_emul_extras=
+all_libpath=
+
+dnl We need to get an arbitrary number of tdir definitions into
+dnl Makefile. We can't do it using AC_SUBST, because autoconf does
+dnl not permit literal newlines in an AC_SUBST variables. So we use a
+dnl file.
+rm -f tdirs
+
+for targ_alias in `echo $target_alias $enable_targets | sed 's/,/ /g'`
+do
+ if test "$targ_alias" = "all"; then
+ all_targets=true
+ else
+ # Canonicalize the secondary target names.
+ result=`$ac_config_sub $targ_alias 2>/dev/null`
+ if test -n "$result"; then
+ targ=$result
+ else
+ targ=$targ_alias
+ fi
+
+ . ${srcdir}/configure.tgt
+
+ if test "$targ" = "$target"; then
+ EMUL=$targ_emul
+ fi
-host_makefile_frag=
+ for i in $targ_emul $targ_extra_emuls $targ_extra_libpath; do
+ case " $all_emuls " in
+ *" e${i}.o "*) ;;
+ *)
+ all_emuls="$all_emuls e${i}.o"
+ eval result=\$tdir_$i
+ test -z "$result" && result=$targ_alias
+ echo tdir_$i=$result >> tdirs
+ ;;
+ esac
+ done
-if [ -f ${srcdir}/config/${my_host}.mh ] ; then
- host_makefile_frag=config/${my_host}.mh
+ for i in $targ_emul $targ_extra_libpath; do
+ case " $all_libpath " in
+ *" ${i} "*) ;;
+ *)
+ if test -z "$all_libpath"; then
+ all_libpath=${i}
+ else
+ all_libpath="$all_libpath ${i}"
+ fi
+ ;;
+ esac
+ done
+
+ for i in $targ_extra_ofiles; do
+ case " $all_emul_extras " in
+ *" ${i} "*) ;;
+ *)
+ all_emul_extras="$all_emul_extras ${i}"
+ ;;
+ esac
+ done
+ fi
+done
+
+AC_SUBST(EMUL)
+
+TDIRS=tdirs
+AC_SUBST_FILE(TDIRS)
+
+dnl FIXME: We will build a 64 bit BFD for a 64 bit host or a 64 bit
+dnl target, and in those cases we should also build the 64 bit
+dnl emulations.
+if test x${all_targets} = xtrue; then
+ if test x${want64} = xtrue; then
+ EMULATION_OFILES='$(ALL_EMULATIONS) $(ALL_64_EMULATIONS)'
+ else
+ EMULATION_OFILES='$(ALL_EMULATIONS)'
+ fi
+ EMUL_EXTRA_OFILES='$(ALL_EMUL_EXTRA_OFILES)'
+else
+ EMULATION_OFILES=$all_emuls
+ EMUL_EXTRA_OFILES=$all_emul_extras
fi
+AC_SUBST(EMULATION_OFILES)
+AC_SUBST(EMUL_EXTRA_OFILES)
-# per-target:
-
-case "${target}" in
-
- sparc-sun-sunos4*) my_target=sun4
- ;;
- m68k-sun-sunos4*) my_target=sun3
- ;;
- sparclite-fujitsu-*) my_target=sun4
- ;;
- i960-wrs-vxworks*) my_target=vxworks960
- ;;
- m68k-wrs-vxworks*) my_target=vxworks68
- ;;
- m680[01234]0-wrs-vxworks*) my_target=vxworks68
- ;;
- m683?2-wrs-vxworks*) my_target=vxworks68
- ;;
- sparc-wrs-vxworks*) my_target=vxsparc
- ;;
- m68k-ericsson-ose) my_target=ose68
- ;;
- *-tandem-none) my_target=st2000 # FIXME needs better name
- ;;
- i386-go32-*) my_target=go32
- ;;
- i386-*-coff) my_target=i386-coff
- ;;
- i386-*-aout) my_target=i386-aout
- ;;
- m88k-*-*) my_target=m88k-bcs
- ;;
- a29k-*-udi) my_target=sa29200
- ;;
- a29k-*-ebmon) my_target=ebmon29k
- ;;
- a29k-*-*) my_target=coff-a29k
- ;;
- h8300-*-hms) my_target=coff-h8300
- ;;
- h8300-*-xray) my_target=ieee-h8300
- ;;
- m68k-sony-*) my_target=news
- ;;
- m68k-hp-bsd*) my_target=hp300bsd
- ;;
- m68*-*-aout) my_target=m68k
- ;;
- m68*-*-coff) my_target=m68k-coff
- ;;
- m68*-*-*) echo '***' "Unknown m68k target vendor for ld:" ${target_vendor} 1>&2
- exit 1
- ;;
- z8k-*sim) my_target=z8ksim
- ;;
- *-*-aout) my_target=${target_cpu}-${target_vendor}
- ;;
- *-*-coff) my_target=${target_cpu}-${target_vendor}
- ;;
-esac
+EMULATION_LIBPATH=$all_libpath
+AC_SUBST(EMULATION_LIBPATH)
+if test x${enable_static} = xno; then
+ TESTBFDLIB="--rpath ../bfd/.libs ../bfd/.libs/libbfd.so"
+else
+ TESTBFDLIB="../bfd/.libs/libbfd.a"
+fi
+AC_SUBST(TESTBFDLIB)
+target_vendor=${target_vendor=$host_vendor}
+case "$target_vendor" in
+ hp) EXTRA_SHLIB_EXTENSION=".sl" ;;
+ *) EXTRA_SHLIB_EXTENSION= ;;
+esac
+if test x${EXTRA_SHLIB_EXTENSION} != x ; then
+ AC_DEFINE_UNQUOTED(EXTRA_SHLIB_EXTENSION, "$EXTRA_SHLIB_EXTENSION",
+ [Additional extension a shared object might have.])
+fi
-target_makefile_frag=config/${my_target}.mt
+AC_OUTPUT(Makefile po/Makefile.in:po/Make-in,
+[sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile])
projects / external / binutils.git / blobdiff