#define CREATE_TRACE_POINTS
#include <trace/events/irq.h>
-#include <asm/irq.h>
/*
- No shared variables, all the data are CPU local.
- If a softirq needs serialization, let it serialize itself
raw_local_irq_save(flags);
/*
- * The preempt tracer hooks into add_preempt_count and will break
+ * The preempt tracer hooks into preempt_count_add and will break
* lockdep because it calls back into lockdep after SOFTIRQ_OFFSET
* is set and before current->softirq_enabled is cleared.
* We must manually increment preempt_count here and manually
* call the trace_preempt_off later.
*/
- preempt_count() += cnt;
+ __preempt_count_add(cnt);
/*
* Were softirqs turned off above:
*/
#else /* !CONFIG_TRACE_IRQFLAGS */
static inline void __local_bh_disable(unsigned long ip, unsigned int cnt)
{
- add_preempt_count(cnt);
+ preempt_count_add(cnt);
barrier();
}
#endif /* CONFIG_TRACE_IRQFLAGS */
static void __local_bh_enable(unsigned int cnt)
{
- WARN_ON_ONCE(in_irq());
WARN_ON_ONCE(!irqs_disabled());
if (softirq_count() == cnt)
trace_softirqs_on(_RET_IP_);
- sub_preempt_count(cnt);
+ preempt_count_sub(cnt);
}
/*
*/
void _local_bh_enable(void)
{
+ WARN_ON_ONCE(in_irq());
__local_bh_enable(SOFTIRQ_DISABLE_OFFSET);
}
* Keep preemption disabled until we are done with
* softirq processing:
*/
- sub_preempt_count(SOFTIRQ_DISABLE_OFFSET - 1);
+ preempt_count_sub(SOFTIRQ_DISABLE_OFFSET - 1);
- if (unlikely(!in_interrupt() && local_softirq_pending()))
+ if (unlikely(!in_interrupt() && local_softirq_pending())) {
+ /*
+ * Run softirq if any pending. And do it in its own stack
+ * as we may be calling this deep in a task call stack already.
+ */
do_softirq();
+ }
- dec_preempt_count();
+ preempt_count_dec();
#ifdef CONFIG_TRACE_IRQFLAGS
local_irq_enable();
#endif
#define MAX_SOFTIRQ_TIME msecs_to_jiffies(2)
#define MAX_SOFTIRQ_RESTART 10
+#ifdef CONFIG_TRACE_IRQFLAGS
+/*
+ * Convoluted means of passing __do_softirq() a message through the various
+ * architecture execute_on_stack() bits.
+ *
+ * When we run softirqs from irq_exit() and thus on the hardirq stack we need
+ * to keep the lockdep irq context tracking as tight as possible in order to
+ * not miss-qualify lock contexts and miss possible deadlocks.
+ */
+static DEFINE_PER_CPU(int, softirq_from_hardirq);
+
+static inline void lockdep_softirq_from_hardirq(void)
+{
+ this_cpu_write(softirq_from_hardirq, 1);
+}
+
+static inline void lockdep_softirq_start(void)
+{
+ if (this_cpu_read(softirq_from_hardirq))
+ trace_hardirq_exit();
+ lockdep_softirq_enter();
+}
+
+static inline void lockdep_softirq_end(void)
+{
+ lockdep_softirq_exit();
+ if (this_cpu_read(softirq_from_hardirq)) {
+ this_cpu_write(softirq_from_hardirq, 0);
+ trace_hardirq_enter();
+ }
+}
+
+#else
+static inline void lockdep_softirq_from_hardirq(void) { }
+static inline void lockdep_softirq_start(void) { }
+static inline void lockdep_softirq_end(void) { }
+#endif
+
asmlinkage void __do_softirq(void)
{
- struct softirq_action *h;
- __u32 pending;
unsigned long end = jiffies + MAX_SOFTIRQ_TIME;
- int cpu;
unsigned long old_flags = current->flags;
int max_restart = MAX_SOFTIRQ_RESTART;
+ struct softirq_action *h;
+ __u32 pending;
+ int cpu;
/*
* Mask out PF_MEMALLOC s current task context is borrowed for the
account_irq_enter_time(current);
__local_bh_disable(_RET_IP_, SOFTIRQ_OFFSET);
- lockdep_softirq_enter();
+ lockdep_softirq_start();
cpu = smp_processor_id();
restart:
" exited with %08x?\n", vec_nr,
softirq_to_name[vec_nr], h->action,
prev_count, preempt_count());
- preempt_count() = prev_count;
+ preempt_count_set(prev_count);
}
rcu_bh_qs(cpu);
wakeup_softirqd();
}
- lockdep_softirq_exit();
-
+ lockdep_softirq_end();
account_irq_exit_time(current);
__local_bh_enable(SOFTIRQ_OFFSET);
+ WARN_ON_ONCE(in_interrupt());
tsk_restore_flags(current, old_flags, PF_MEMALLOC);
}
-#ifndef __ARCH_HAS_DO_SOFTIRQ
-
asmlinkage void do_softirq(void)
{
__u32 pending;
pending = local_softirq_pending();
if (pending)
- __do_softirq();
+ do_softirq_own_stack();
local_irq_restore(flags);
}
-#endif
-
/*
* Enter an interrupt context.
*/
static inline void invoke_softirq(void)
{
if (!force_irqthreads) {
+ lockdep_softirq_from_hardirq();
+#ifdef CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK
/*
* We can safely execute softirq on the current stack if
* it is the irq stack, because it should be near empty
- * at this stage. But we have no way to know if the arch
- * calls irq_exit() on the irq stack. So call softirq
- * in its own stack to prevent from any overrun on top
- * of a potentially deep task stack.
+ * at this stage.
*/
- do_softirq();
+ __do_softirq();
+#else
+ /*
+ * Otherwise, irq_exit() is called on the task stack that can
+ * be potentially deep already. So call softirq in its own stack
+ * to prevent from any overrun.
+ */
+ do_softirq_own_stack();
+#endif
} else {
wakeup_softirqd();
}
#endif
account_irq_exit_time(current);
- trace_hardirq_exit();
- sub_preempt_count(HARDIRQ_OFFSET);
+ preempt_count_sub(HARDIRQ_OFFSET);
if (!in_interrupt() && local_softirq_pending())
invoke_softirq();
tick_irq_exit();
rcu_irq_exit();
+ trace_hardirq_exit(); /* must be last! */
}
/*
{
local_irq_disable();
if (local_softirq_pending()) {
+ /*
+ * We can safely run softirq on inline stack, as we are not deep
+ * in the task stack here.
+ */
__do_softirq();
rcu_note_context_switch(cpu);
local_irq_enable();