}
/*
+ * Deadlock detection is conditional:
+ *
+ * If CONFIG_DEBUG_RT_MUTEXES=n, deadlock detection is only conducted
+ * if the detect argument is == RT_MUTEX_FULL_CHAINWALK.
+ *
+ * If CONFIG_DEBUG_RT_MUTEXES=y, deadlock detection is always
+ * conducted independent of the detect argument.
+ *
+ * If the waiter argument is NULL this indicates the deboost path and
+ * deadlock detection is disabled independent of the detect argument
+ * and the config settings.
+ */
+static bool rt_mutex_cond_detect_deadlock(struct rt_mutex_waiter *waiter,
+ enum rtmutex_chainwalk chwalk)
+{
+ /*
+ * This is just a wrapper function for the following call,
+ * because debug_rt_mutex_detect_deadlock() smells like a magic
+ * debug feature and I wanted to keep the cond function in the
+ * main source file along with the comments instead of having
+ * two of the same in the headers.
+ */
+ return debug_rt_mutex_detect_deadlock(waiter, chwalk);
+}
+
+/*
* Max number of times we'll walk the boosting chain:
*/
int max_lock_depth = 1024;
* @top_task: the current top waiter
*
* Returns 0 or -EDEADLK.
+ *
+ * Chain walk basics and protection scope
+ *
+ * [R] refcount on task
+ * [P] task->pi_lock held
+ * [L] rtmutex->wait_lock held
+ *
+ * Step Description Protected by
+ * function arguments:
+ * @task [R]
+ * @orig_lock if != NULL @top_task is blocked on it
+ * @next_lock Unprotected. Cannot be
+ * dereferenced. Only used for
+ * comparison.
+ * @orig_waiter if != NULL @top_task is blocked on it
+ * @top_task current, or in case of proxy
+ * locking protected by calling
+ * code
+ * again:
+ * loop_sanity_check();
+ * retry:
+ * [1] lock(task->pi_lock); [R] acquire [P]
+ * [2] waiter = task->pi_blocked_on; [P]
+ * [3] check_exit_conditions_1(); [P]
+ * [4] lock = waiter->lock; [P]
+ * [5] if (!try_lock(lock->wait_lock)) { [P] try to acquire [L]
+ * unlock(task->pi_lock); release [P]
+ * goto retry;
+ * }
+ * [6] check_exit_conditions_2(); [P] + [L]
+ * [7] requeue_lock_waiter(lock, waiter); [P] + [L]
+ * [8] unlock(task->pi_lock); release [P]
+ * put_task_struct(task); release [R]
+ * [9] check_exit_conditions_3(); [L]
+ * [10] task = owner(lock); [L]
+ * get_task_struct(task); [L] acquire [R]
+ * lock(task->pi_lock); [L] acquire [P]
+ * [11] requeue_pi_waiter(tsk, waiters(lock));[P] + [L]
+ * [12] check_exit_conditions_4(); [P] + [L]
+ * [13] unlock(task->pi_lock); release [P]
+ * unlock(lock->wait_lock); release [L]
+ * goto again;
*/
static int rt_mutex_adjust_prio_chain(struct task_struct *task,
- int deadlock_detect,
+ enum rtmutex_chainwalk chwalk,
struct rt_mutex *orig_lock,
struct rt_mutex *next_lock,
struct rt_mutex_waiter *orig_waiter,
struct task_struct *top_task)
{
- struct rt_mutex *lock;
struct rt_mutex_waiter *waiter, *top_waiter = orig_waiter;
- int detect_deadlock, ret = 0, depth = 0;
+ struct rt_mutex_waiter *prerequeue_top_waiter;
+ int ret = 0, depth = 0;
+ struct rt_mutex *lock;
+ bool detect_deadlock;
unsigned long flags;
+ bool requeue = true;
- detect_deadlock = debug_rt_mutex_detect_deadlock(orig_waiter,
- deadlock_detect);
+ detect_deadlock = rt_mutex_cond_detect_deadlock(orig_waiter, chwalk);
/*
* The (de)boosting is a step by step approach with a lot of
* carefully whether things change under us.
*/
again:
+ /*
+ * We limit the lock chain length for each invocation.
+ */
if (++depth > max_lock_depth) {
static int prev_max;
return -EDEADLK;
}
+
+ /*
+ * We are fully preemptible here and only hold the refcount on
+ * @task. So everything can have changed under us since the
+ * caller or our own code below (goto retry/again) dropped all
+ * locks.
+ */
retry:
/*
- * Task can not go away as we did a get_task() before !
+ * [1] Task cannot go away as we did a get_task() before !
*/
raw_spin_lock_irqsave(&task->pi_lock, flags);
+ /*
+ * [2] Get the waiter on which @task is blocked on.
+ */
waiter = task->pi_blocked_on;
+
+ /*
+ * [3] check_exit_conditions_1() protected by task->pi_lock.
+ */
+
/*
* Check whether the end of the boosting chain has been
* reached or the state of the chain has changed while we
goto out_unlock_pi;
/*
* If deadlock detection is off, we stop here if we
- * are not the top pi waiter of the task.
+ * are not the top pi waiter of the task. If deadlock
+ * detection is enabled we continue, but stop the
+ * requeueing in the chain walk.
*/
- if (!detect_deadlock && top_waiter != task_top_pi_waiter(task))
- goto out_unlock_pi;
+ if (top_waiter != task_top_pi_waiter(task)) {
+ if (!detect_deadlock)
+ goto out_unlock_pi;
+ else
+ requeue = false;
+ }
}
/*
- * When deadlock detection is off then we check, if further
- * priority adjustment is necessary.
+ * If the waiter priority is the same as the task priority
+ * then there is no further priority adjustment necessary. If
+ * deadlock detection is off, we stop the chain walk. If its
+ * enabled we continue, but stop the requeueing in the chain
+ * walk.
*/
- if (!detect_deadlock && waiter->prio == task->prio)
- goto out_unlock_pi;
+ if (waiter->prio == task->prio) {
+ if (!detect_deadlock)
+ goto out_unlock_pi;
+ else
+ requeue = false;
+ }
+ /*
+ * [4] Get the next lock
+ */
lock = waiter->lock;
+ /*
+ * [5] We need to trylock here as we are holding task->pi_lock,
+ * which is the reverse lock order versus the other rtmutex
+ * operations.
+ */
if (!raw_spin_trylock(&lock->wait_lock)) {
raw_spin_unlock_irqrestore(&task->pi_lock, flags);
cpu_relax();
}
/*
+ * [6] check_exit_conditions_2() protected by task->pi_lock and
+ * lock->wait_lock.
+ *
* Deadlock detection. If the lock is the same as the original
* lock which caused us to walk the lock chain or if the
* current lock is owned by the task which initiated the chain
* walk, we detected a deadlock.
*/
if (lock == orig_lock || rt_mutex_owner(lock) == top_task) {
- debug_rt_mutex_deadlock(deadlock_detect, orig_waiter, lock);
+ debug_rt_mutex_deadlock(chwalk, orig_waiter, lock);
raw_spin_unlock(&lock->wait_lock);
ret = -EDEADLK;
goto out_unlock_pi;
}
- top_waiter = rt_mutex_top_waiter(lock);
+ /*
+ * If we just follow the lock chain for deadlock detection, no
+ * need to do all the requeue operations. To avoid a truckload
+ * of conditionals around the various places below, just do the
+ * minimum chain walk checks.
+ */
+ if (!requeue) {
+ /*
+ * No requeue[7] here. Just release @task [8]
+ */
+ raw_spin_unlock_irqrestore(&task->pi_lock, flags);
+ put_task_struct(task);
+
+ /*
+ * [9] check_exit_conditions_3 protected by lock->wait_lock.
+ * If there is no owner of the lock, end of chain.
+ */
+ if (!rt_mutex_owner(lock)) {
+ raw_spin_unlock(&lock->wait_lock);
+ return 0;
+ }
+
+ /* [10] Grab the next task, i.e. owner of @lock */
+ task = rt_mutex_owner(lock);
+ get_task_struct(task);
+ raw_spin_lock_irqsave(&task->pi_lock, flags);
+
+ /*
+ * No requeue [11] here. We just do deadlock detection.
+ *
+ * [12] Store whether owner is blocked
+ * itself. Decision is made after dropping the locks
+ */
+ next_lock = task_blocked_on_lock(task);
+ /*
+ * Get the top waiter for the next iteration
+ */
+ top_waiter = rt_mutex_top_waiter(lock);
+
+ /* [13] Drop locks */
+ raw_spin_unlock_irqrestore(&task->pi_lock, flags);
+ raw_spin_unlock(&lock->wait_lock);
+
+ /* If owner is not blocked, end of chain. */
+ if (!next_lock)
+ goto out_put_task;
+ goto again;
+ }
- /* Requeue the waiter */
+ /*
+ * Store the current top waiter before doing the requeue
+ * operation on @lock. We need it for the boost/deboost
+ * decision below.
+ */
+ prerequeue_top_waiter = rt_mutex_top_waiter(lock);
+
+ /* [7] Requeue the waiter in the lock waiter list. */
rt_mutex_dequeue(lock, waiter);
waiter->prio = task->prio;
rt_mutex_enqueue(lock, waiter);
- /* Release the task */
+ /* [8] Release the task */
raw_spin_unlock_irqrestore(&task->pi_lock, flags);
+ put_task_struct(task);
+
+ /*
+ * [9] check_exit_conditions_3 protected by lock->wait_lock.
+ *
+ * We must abort the chain walk if there is no lock owner even
+ * in the dead lock detection case, as we have nothing to
+ * follow here. This is the end of the chain we are walking.
+ */
if (!rt_mutex_owner(lock)) {
/*
- * If the requeue above changed the top waiter, then we need
- * to wake the new top waiter up to try to get the lock.
+ * If the requeue [7] above changed the top waiter,
+ * then we need to wake the new top waiter up to try
+ * to get the lock.
*/
-
- if (top_waiter != rt_mutex_top_waiter(lock))
+ if (prerequeue_top_waiter != rt_mutex_top_waiter(lock))
wake_up_process(rt_mutex_top_waiter(lock)->task);
raw_spin_unlock(&lock->wait_lock);
- goto out_put_task;
+ return 0;
}
- put_task_struct(task);
- /* Grab the next task */
+ /* [10] Grab the next task, i.e. the owner of @lock */
task = rt_mutex_owner(lock);
get_task_struct(task);
raw_spin_lock_irqsave(&task->pi_lock, flags);
+ /* [11] requeue the pi waiters if necessary */
if (waiter == rt_mutex_top_waiter(lock)) {
- /* Boost the owner */
- rt_mutex_dequeue_pi(task, top_waiter);
+ /*
+ * The waiter became the new top (highest priority)
+ * waiter on the lock. Replace the previous top waiter
+ * in the owner tasks pi waiters list with this waiter
+ * and adjust the priority of the owner.
+ */
+ rt_mutex_dequeue_pi(task, prerequeue_top_waiter);
rt_mutex_enqueue_pi(task, waiter);
__rt_mutex_adjust_prio(task);
- } else if (top_waiter == waiter) {
- /* Deboost the owner */
+ } else if (prerequeue_top_waiter == waiter) {
+ /*
+ * The waiter was the top waiter on the lock, but is
+ * no longer the top prority waiter. Replace waiter in
+ * the owner tasks pi waiters list with the new top
+ * (highest priority) waiter and adjust the priority
+ * of the owner.
+ * The new top waiter is stored in @waiter so that
+ * @waiter == @top_waiter evaluates to true below and
+ * we continue to deboost the rest of the chain.
+ */
rt_mutex_dequeue_pi(task, waiter);
waiter = rt_mutex_top_waiter(lock);
rt_mutex_enqueue_pi(task, waiter);
__rt_mutex_adjust_prio(task);
+ } else {
+ /*
+ * Nothing changed. No need to do any priority
+ * adjustment.
+ */
}
/*
+ * [12] check_exit_conditions_4() protected by task->pi_lock
+ * and lock->wait_lock. The actual decisions are made after we
+ * dropped the locks.
+ *
* Check whether the task which owns the current lock is pi
* blocked itself. If yes we store a pointer to the lock for
* the lock chain change detection above. After we dropped
* task->pi_lock next_lock cannot be dereferenced anymore.
*/
next_lock = task_blocked_on_lock(task);
+ /*
+ * Store the top waiter of @lock for the end of chain walk
+ * decision below.
+ */
+ top_waiter = rt_mutex_top_waiter(lock);
+ /* [13] Drop the locks */
raw_spin_unlock_irqrestore(&task->pi_lock, flags);
-
- top_waiter = rt_mutex_top_waiter(lock);
raw_spin_unlock(&lock->wait_lock);
/*
+ * Make the actual exit decisions [12], based on the stored
+ * values.
+ *
* We reached the end of the lock chain. Stop right here. No
* point to go back just to figure that out.
*/
if (!next_lock)
goto out_put_task;
+ /*
+ * If the current waiter is not the top waiter on the lock,
+ * then we can stop the chain walk here if we are not in full
+ * deadlock detection mode.
+ */
if (!detect_deadlock && waiter != top_waiter)
goto out_put_task;
*
* Must be called with lock->wait_lock held.
*
- * @lock: the lock to be acquired.
- * @task: the task which wants to acquire the lock
- * @waiter: the waiter that is queued to the lock's wait list. (could be NULL)
+ * @lock: The lock to be acquired.
+ * @task: The task which wants to acquire the lock
+ * @waiter: The waiter that is queued to the lock's wait list if the
+ * callsite called task_blocked_on_lock(), otherwise NULL
*/
static int try_to_take_rt_mutex(struct rt_mutex *lock, struct task_struct *task,
- struct rt_mutex_waiter *waiter)
+ struct rt_mutex_waiter *waiter)
{
+ unsigned long flags;
+
/*
- * We have to be careful here if the atomic speedups are
- * enabled, such that, when
- * - no other waiter is on the lock
- * - the lock has been released since we did the cmpxchg
- * the lock can be released or taken while we are doing the
- * checks and marking the lock with RT_MUTEX_HAS_WAITERS.
+ * Before testing whether we can acquire @lock, we set the
+ * RT_MUTEX_HAS_WAITERS bit in @lock->owner. This forces all
+ * other tasks which try to modify @lock into the slow path
+ * and they serialize on @lock->wait_lock.
+ *
+ * The RT_MUTEX_HAS_WAITERS bit can have a transitional state
+ * as explained at the top of this file if and only if:
*
- * The atomic acquire/release aware variant of
- * mark_rt_mutex_waiters uses a cmpxchg loop. After setting
- * the WAITERS bit, the atomic release / acquire can not
- * happen anymore and lock->wait_lock protects us from the
- * non-atomic case.
+ * - There is a lock owner. The caller must fixup the
+ * transient state if it does a trylock or leaves the lock
+ * function due to a signal or timeout.
*
- * Note, that this might set lock->owner =
- * RT_MUTEX_HAS_WAITERS in the case the lock is not contended
- * any more. This is fixed up when we take the ownership.
- * This is the transitional state explained at the top of this file.
+ * - @task acquires the lock and there are no other
+ * waiters. This is undone in rt_mutex_set_owner(@task) at
+ * the end of this function.
*/
mark_rt_mutex_waiters(lock);
+ /*
+ * If @lock has an owner, give up.
+ */
if (rt_mutex_owner(lock))
return 0;
/*
- * It will get the lock because of one of these conditions:
- * 1) there is no waiter
- * 2) higher priority than waiters
- * 3) it is top waiter
+ * If @waiter != NULL, @task has already enqueued the waiter
+ * into @lock waiter list. If @waiter == NULL then this is a
+ * trylock attempt.
*/
- if (rt_mutex_has_waiters(lock)) {
- if (task->prio >= rt_mutex_top_waiter(lock)->prio) {
- if (!waiter || waiter != rt_mutex_top_waiter(lock))
- return 0;
- }
- }
-
- if (waiter || rt_mutex_has_waiters(lock)) {
- unsigned long flags;
- struct rt_mutex_waiter *top;
-
- raw_spin_lock_irqsave(&task->pi_lock, flags);
+ if (waiter) {
+ /*
+ * If waiter is not the highest priority waiter of
+ * @lock, give up.
+ */
+ if (waiter != rt_mutex_top_waiter(lock))
+ return 0;
- /* remove the queued waiter. */
- if (waiter) {
- rt_mutex_dequeue(lock, waiter);
- task->pi_blocked_on = NULL;
- }
+ /*
+ * We can acquire the lock. Remove the waiter from the
+ * lock waiters list.
+ */
+ rt_mutex_dequeue(lock, waiter);
+ } else {
/*
- * We have to enqueue the top waiter(if it exists) into
- * task->pi_waiters list.
+ * If the lock has waiters already we check whether @task is
+ * eligible to take over the lock.
+ *
+ * If there are no other waiters, @task can acquire
+ * the lock. @task->pi_blocked_on is NULL, so it does
+ * not need to be dequeued.
*/
if (rt_mutex_has_waiters(lock)) {
- top = rt_mutex_top_waiter(lock);
- rt_mutex_enqueue_pi(task, top);
+ /*
+ * If @task->prio is greater than or equal to
+ * the top waiter priority (kernel view),
+ * @task lost.
+ */
+ if (task->prio >= rt_mutex_top_waiter(lock)->prio)
+ return 0;
+
+ /*
+ * The current top waiter stays enqueued. We
+ * don't have to change anything in the lock
+ * waiters order.
+ */
+ } else {
+ /*
+ * No waiters. Take the lock without the
+ * pi_lock dance.@task->pi_blocked_on is NULL
+ * and we have no waiters to enqueue in @task
+ * pi waiters list.
+ */
+ goto takeit;
}
- raw_spin_unlock_irqrestore(&task->pi_lock, flags);
}
+ /*
+ * Clear @task->pi_blocked_on. Requires protection by
+ * @task->pi_lock. Redundant operation for the @waiter == NULL
+ * case, but conditionals are more expensive than a redundant
+ * store.
+ */
+ raw_spin_lock_irqsave(&task->pi_lock, flags);
+ task->pi_blocked_on = NULL;
+ /*
+ * Finish the lock acquisition. @task is the new owner. If
+ * other waiters exist we have to insert the highest priority
+ * waiter into @task->pi_waiters list.
+ */
+ if (rt_mutex_has_waiters(lock))
+ rt_mutex_enqueue_pi(task, rt_mutex_top_waiter(lock));
+ raw_spin_unlock_irqrestore(&task->pi_lock, flags);
+
+takeit:
/* We got the lock. */
debug_rt_mutex_lock(lock);
+ /*
+ * This either preserves the RT_MUTEX_HAS_WAITERS bit if there
+ * are still waiters or clears it.
+ */
rt_mutex_set_owner(lock, task);
rt_mutex_deadlock_account_lock(lock, task);
static int task_blocks_on_rt_mutex(struct rt_mutex *lock,
struct rt_mutex_waiter *waiter,
struct task_struct *task,
- int detect_deadlock)
+ enum rtmutex_chainwalk chwalk)
{
struct task_struct *owner = rt_mutex_owner(lock);
struct rt_mutex_waiter *top_waiter = waiter;
__rt_mutex_adjust_prio(owner);
if (owner->pi_blocked_on)
chain_walk = 1;
- } else if (debug_rt_mutex_detect_deadlock(waiter, detect_deadlock)) {
+ } else if (rt_mutex_cond_detect_deadlock(waiter, chwalk)) {
chain_walk = 1;
}
raw_spin_unlock(&lock->wait_lock);
- res = rt_mutex_adjust_prio_chain(owner, detect_deadlock, lock,
+ res = rt_mutex_adjust_prio_chain(owner, chwalk, lock,
next_lock, waiter, task);
raw_spin_lock(&lock->wait_lock);
static void remove_waiter(struct rt_mutex *lock,
struct rt_mutex_waiter *waiter)
{
- int first = (waiter == rt_mutex_top_waiter(lock));
+ bool is_top_waiter = (waiter == rt_mutex_top_waiter(lock));
struct task_struct *owner = rt_mutex_owner(lock);
- struct rt_mutex *next_lock = NULL;
+ struct rt_mutex *next_lock;
unsigned long flags;
raw_spin_lock_irqsave(¤t->pi_lock, flags);
current->pi_blocked_on = NULL;
raw_spin_unlock_irqrestore(¤t->pi_lock, flags);
- if (!owner)
+ /*
+ * Only update priority if the waiter was the highest priority
+ * waiter of the lock and there is an owner to update.
+ */
+ if (!owner || !is_top_waiter)
return;
- if (first) {
-
- raw_spin_lock_irqsave(&owner->pi_lock, flags);
+ raw_spin_lock_irqsave(&owner->pi_lock, flags);
- rt_mutex_dequeue_pi(owner, waiter);
+ rt_mutex_dequeue_pi(owner, waiter);
- if (rt_mutex_has_waiters(lock)) {
- struct rt_mutex_waiter *next;
+ if (rt_mutex_has_waiters(lock))
+ rt_mutex_enqueue_pi(owner, rt_mutex_top_waiter(lock));
- next = rt_mutex_top_waiter(lock);
- rt_mutex_enqueue_pi(owner, next);
- }
- __rt_mutex_adjust_prio(owner);
+ __rt_mutex_adjust_prio(owner);
- /* Store the lock on which owner is blocked or NULL */
- next_lock = task_blocked_on_lock(owner);
+ /* Store the lock on which owner is blocked or NULL */
+ next_lock = task_blocked_on_lock(owner);
- raw_spin_unlock_irqrestore(&owner->pi_lock, flags);
- }
+ raw_spin_unlock_irqrestore(&owner->pi_lock, flags);
+ /*
+ * Don't walk the chain, if the owner task is not blocked
+ * itself.
+ */
if (!next_lock)
return;
raw_spin_unlock(&lock->wait_lock);
- rt_mutex_adjust_prio_chain(owner, 0, lock, next_lock, NULL, current);
+ rt_mutex_adjust_prio_chain(owner, RT_MUTEX_MIN_CHAINWALK, lock,
+ next_lock, NULL, current);
raw_spin_lock(&lock->wait_lock);
}
/* gets dropped in rt_mutex_adjust_prio_chain()! */
get_task_struct(task);
- rt_mutex_adjust_prio_chain(task, 0, NULL, next_lock, NULL, task);
+ rt_mutex_adjust_prio_chain(task, RT_MUTEX_MIN_CHAINWALK, NULL,
+ next_lock, NULL, task);
}
/**
static int __sched
rt_mutex_slowlock(struct rt_mutex *lock, int state,
struct hrtimer_sleeper *timeout,
- int detect_deadlock)
+ enum rtmutex_chainwalk chwalk)
{
struct rt_mutex_waiter waiter;
int ret = 0;
timeout->task = NULL;
}
- ret = task_blocks_on_rt_mutex(lock, &waiter, current, detect_deadlock);
+ ret = task_blocks_on_rt_mutex(lock, &waiter, current, chwalk);
if (likely(!ret))
ret = __rt_mutex_slowlock(lock, state, timeout, &waiter);
if (unlikely(ret)) {
remove_waiter(lock, &waiter);
- rt_mutex_handle_deadlock(ret, detect_deadlock, &waiter);
+ rt_mutex_handle_deadlock(ret, chwalk, &waiter);
}
/*
/*
* Slow path try-lock function:
*/
-static inline int
-rt_mutex_slowtrylock(struct rt_mutex *lock)
+static inline int rt_mutex_slowtrylock(struct rt_mutex *lock)
{
- int ret = 0;
+ int ret;
+
+ /*
+ * If the lock already has an owner we fail to get the lock.
+ * This can be done without taking the @lock->wait_lock as
+ * it is only being read, and this is a trylock anyway.
+ */
+ if (rt_mutex_owner(lock))
+ return 0;
+ /*
+ * The mutex has currently no owner. Lock the wait lock and
+ * try to acquire the lock.
+ */
raw_spin_lock(&lock->wait_lock);
- if (likely(rt_mutex_owner(lock) != current)) {
+ ret = try_to_take_rt_mutex(lock, current, NULL);
- ret = try_to_take_rt_mutex(lock, current, NULL);
- /*
- * try_to_take_rt_mutex() sets the lock waiters
- * bit unconditionally. Clean this up.
- */
- fixup_rt_mutex_waiters(lock);
- }
+ /*
+ * try_to_take_rt_mutex() sets the lock waiters bit
+ * unconditionally. Clean this up.
+ */
+ fixup_rt_mutex_waiters(lock);
raw_spin_unlock(&lock->wait_lock);
*/
static inline int
rt_mutex_fastlock(struct rt_mutex *lock, int state,
- int detect_deadlock,
int (*slowfn)(struct rt_mutex *lock, int state,
struct hrtimer_sleeper *timeout,
- int detect_deadlock))
+ enum rtmutex_chainwalk chwalk))
{
- if (!detect_deadlock && likely(rt_mutex_cmpxchg(lock, NULL, current))) {
+ if (likely(rt_mutex_cmpxchg(lock, NULL, current))) {
rt_mutex_deadlock_account_lock(lock, current);
return 0;
} else
- return slowfn(lock, state, NULL, detect_deadlock);
+ return slowfn(lock, state, NULL, RT_MUTEX_MIN_CHAINWALK);
}
static inline int
rt_mutex_timed_fastlock(struct rt_mutex *lock, int state,
- struct hrtimer_sleeper *timeout, int detect_deadlock,
+ struct hrtimer_sleeper *timeout,
+ enum rtmutex_chainwalk chwalk,
int (*slowfn)(struct rt_mutex *lock, int state,
struct hrtimer_sleeper *timeout,
- int detect_deadlock))
+ enum rtmutex_chainwalk chwalk))
{
- if (!detect_deadlock && likely(rt_mutex_cmpxchg(lock, NULL, current))) {
+ if (chwalk == RT_MUTEX_MIN_CHAINWALK &&
+ likely(rt_mutex_cmpxchg(lock, NULL, current))) {
rt_mutex_deadlock_account_lock(lock, current);
return 0;
} else
- return slowfn(lock, state, timeout, detect_deadlock);
+ return slowfn(lock, state, timeout, chwalk);
}
static inline int
{
might_sleep();
- rt_mutex_fastlock(lock, TASK_UNINTERRUPTIBLE, 0, rt_mutex_slowlock);
+ rt_mutex_fastlock(lock, TASK_UNINTERRUPTIBLE, rt_mutex_slowlock);
}
EXPORT_SYMBOL_GPL(rt_mutex_lock);
/**
* rt_mutex_lock_interruptible - lock a rt_mutex interruptible
*
- * @lock: the rt_mutex to be locked
- * @detect_deadlock: deadlock detection on/off
+ * @lock: the rt_mutex to be locked
*
* Returns:
- * 0 on success
- * -EINTR when interrupted by a signal
- * -EDEADLK when the lock would deadlock (when deadlock detection is on)
+ * 0 on success
+ * -EINTR when interrupted by a signal
*/
-int __sched rt_mutex_lock_interruptible(struct rt_mutex *lock,
- int detect_deadlock)
+int __sched rt_mutex_lock_interruptible(struct rt_mutex *lock)
{
might_sleep();
- return rt_mutex_fastlock(lock, TASK_INTERRUPTIBLE,
- detect_deadlock, rt_mutex_slowlock);
+ return rt_mutex_fastlock(lock, TASK_INTERRUPTIBLE, rt_mutex_slowlock);
}
EXPORT_SYMBOL_GPL(rt_mutex_lock_interruptible);
+/*
+ * Futex variant with full deadlock detection.
+ */
+int rt_mutex_timed_futex_lock(struct rt_mutex *lock,
+ struct hrtimer_sleeper *timeout)
+{
+ might_sleep();
+
+ return rt_mutex_timed_fastlock(lock, TASK_INTERRUPTIBLE, timeout,
+ RT_MUTEX_FULL_CHAINWALK,
+ rt_mutex_slowlock);
+}
+
/**
* rt_mutex_timed_lock - lock a rt_mutex interruptible
* the timeout structure is provided
* by the caller
*
- * @lock: the rt_mutex to be locked
+ * @lock: the rt_mutex to be locked
* @timeout: timeout structure or NULL (no timeout)
- * @detect_deadlock: deadlock detection on/off
*
* Returns:
- * 0 on success
- * -EINTR when interrupted by a signal
+ * 0 on success
+ * -EINTR when interrupted by a signal
* -ETIMEDOUT when the timeout expired
- * -EDEADLK when the lock would deadlock (when deadlock detection is on)
*/
int
-rt_mutex_timed_lock(struct rt_mutex *lock, struct hrtimer_sleeper *timeout,
- int detect_deadlock)
+rt_mutex_timed_lock(struct rt_mutex *lock, struct hrtimer_sleeper *timeout)
{
might_sleep();
return rt_mutex_timed_fastlock(lock, TASK_INTERRUPTIBLE, timeout,
- detect_deadlock, rt_mutex_slowlock);
+ RT_MUTEX_MIN_CHAINWALK,
+ rt_mutex_slowlock);
}
EXPORT_SYMBOL_GPL(rt_mutex_timed_lock);
* @lock: the rt_mutex to take
* @waiter: the pre-initialized rt_mutex_waiter
* @task: the task to prepare
- * @detect_deadlock: perform deadlock detection (1) or not (0)
*
* Returns:
* 0 - task blocked on lock
*/
int rt_mutex_start_proxy_lock(struct rt_mutex *lock,
struct rt_mutex_waiter *waiter,
- struct task_struct *task, int detect_deadlock)
+ struct task_struct *task)
{
int ret;
}
/* We enforce deadlock detection for futexes */
- ret = task_blocks_on_rt_mutex(lock, waiter, task, 1);
+ ret = task_blocks_on_rt_mutex(lock, waiter, task,
+ RT_MUTEX_FULL_CHAINWALK);
if (ret && !rt_mutex_owner(lock)) {
/*
* rt_mutex_finish_proxy_lock() - Complete lock acquisition
* @lock: the rt_mutex we were woken on
* @to: the timeout, null if none. hrtimer should already have
- * been started.
+ * been started.
* @waiter: the pre-initialized rt_mutex_waiter
- * @detect_deadlock: perform deadlock detection (1) or not (0)
*
* Complete the lock acquisition started our behalf by another thread.
*
* Returns:
* 0 - success
- * <0 - error, one of -EINTR, -ETIMEDOUT, or -EDEADLK
+ * <0 - error, one of -EINTR, -ETIMEDOUT
*
* Special API call for PI-futex requeue support
*/
int rt_mutex_finish_proxy_lock(struct rt_mutex *lock,
struct hrtimer_sleeper *to,
- struct rt_mutex_waiter *waiter,
- int detect_deadlock)
+ struct rt_mutex_waiter *waiter)
{
int ret;
projects / platform / kernel / linux-rpi.git / blobdiff