* IRQF_TRIGGER_* but the PIC does not support multiple
* flow-types?
*/
- pr_debug("No set_type function for IRQ %d (%s)\n", irq,
- chip ? (chip->name ? : "unknown") : "unknown");
+ pr_debug("genirq: No set_type function for IRQ %d (%s)\n", irq,
+ chip ? (chip->name ? : "unknown") : "unknown");
return 0;
}
ret = 0;
break;
default:
- pr_err("setting trigger mode %lu for irq %u failed (%pF)\n",
+ pr_err("genirq: Setting trigger mode %lu for irq %u failed (%pF)\n",
flags, irq, chip->irq_set_type);
}
if (unmask)
action = kthread_data(tsk);
- printk(KERN_ERR
- "exiting task \"%s\" (%d) is an active IRQ thread (irq %d)\n",
+ pr_err("genirq: exiting task \"%s\" (%d) is an active IRQ thread (irq %d)\n",
tsk->comm ? tsk->comm : "", tsk->pid, action->irq);
desc = irq_to_desc(action->irq);
__setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
{
struct irqaction *old, **old_ptr;
- const char *old_name = NULL;
unsigned long flags, thread_mask = 0;
int ret, nested, shared = 0;
cpumask_var_t mask;
*/
if (!((old->flags & new->flags) & IRQF_SHARED) ||
((old->flags ^ new->flags) & IRQF_TRIGGER_MASK) ||
- ((old->flags ^ new->flags) & IRQF_ONESHOT)) {
- old_name = old->name;
+ ((old->flags ^ new->flags) & IRQF_ONESHOT))
goto mismatch;
- }
/* All handlers must agree on per-cpuness */
if ((old->flags & IRQF_PERCPU) !=
* all existing action->thread_mask bits.
*/
new->thread_mask = 1 << ffz(thread_mask);
+
+ } else if (new->handler == irq_default_primary_handler) {
+ /*
+ * The interrupt was requested with handler = NULL, so
+ * we use the default primary handler for it. But it
+ * does not have the oneshot flag set. In combination
+ * with level interrupts this is deadly, because the
+ * default primary handler just wakes the thread, then
+ * the irq lines is reenabled, but the device still
+ * has the level irq asserted. Rinse and repeat....
+ *
+ * While this works for edge type interrupts, we play
+ * it safe and reject unconditionally because we can't
+ * say for sure which type this interrupt really
+ * has. The type flags are unreliable as the
+ * underlying chip implementation can override them.
+ */
+ pr_err("genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq %d\n",
+ irq);
+ ret = -EINVAL;
+ goto out_mask;
}
if (!shared) {
if (nmsk != omsk)
/* hope the handler works with current trigger mode */
- pr_warning("IRQ %d uses trigger mode %u; requested %u\n",
+ pr_warning("genirq: irq %d uses trigger mode %u; requested %u\n",
irq, nmsk, omsk);
}
return 0;
mismatch:
-#ifdef CONFIG_DEBUG_SHIRQ
if (!(new->flags & IRQF_PROBE_SHARED)) {
- printk(KERN_ERR "IRQ handler type mismatch for IRQ %d\n", irq);
- if (old_name)
- printk(KERN_ERR "current handler: %s\n", old_name);
+ pr_err("genirq: Flags mismatch irq %d. %08x (%s) vs. %08x (%s)\n",
+ irq, new->flags, new->name, old->flags, old->name);
+#ifdef CONFIG_DEBUG_SHIRQ
dump_stack();
- }
#endif
+ }
ret = -EBUSY;
out_mask:
/* Found it - now remove it from the list of entries: */
*action_ptr = action->next;
- /* Currently used only by UML, might disappear one day: */
-#ifdef CONFIG_IRQ_RELEASE_METHOD
- if (desc->irq_data.chip->release)
- desc->irq_data.chip->release(irq, dev_id);
-#endif
-
/* If this was the last handler, shut down the IRQ line: */
if (!desc->action)
irq_shutdown(desc);